IR HIGH SPEED DOME CAMERA User`s Manual - E
Contents
1. 40OpenUIR LED always on 5 iCloseUIR LED always off Note jD N AUTO of camera is valid unless the dome is set as Internal Synchronization Auto B1 Environment Threshold Value User can adjust the environment light threshold value as to different application locations In External synchronization Auto type default value is 1 2lux there may be slight difference because of the direction of IR LED IR LED is on in light condition Threshold value can be set from 1 to 10 1 means that the light is weak and 10 means that the light is strong C1 Sensitivity Setup When the IR LED is on environment light threshold to close IR LED delays 1 stands for high sensitivity and related delay range is narrow IR LED on and off may switch frequently in a certain light condition 10 stands for low sensitivity and related delay range is wide there is a huge light difference when IR LED on and off Default value is 5 D1 Open Time Press iris on to enter open time setup and move joystick leftward or rightward to select the time value you want to change and upward or downward to change the value E10 Close time Press Iris on to set close time and move joystick from left and right to select clock bit move joystick from up and down to change value Note It is effective to set start time and close time o2. e Auto manual white balance e Auto manual focus e Auto manual brightness control e 530TV line e Multiple kinds of camera for options 4 All weather Outdoor Design e Built in heater e Built in fan can operate in 60 e High Die cast Aluminum Construction e P66 water proof e 3000V lightning and surge current proof 502 Function Instruction e Menu Function Support Chinese and English menu operation e Dome Address Setting Support up to 256 dome addresses and dome can be controlled by the order in same address The address can be set by the dial switch on decoder board e Privacy Protection Function Set black areas to mask the privacy or security parts The black areas location can be set and support up to 8 mask zones e Timing Running Function Users can set soeed dome operation task at different time during one week e Direction Indication Function Users can set North by themselves and also can set indication area When speed dome turns to the area the tilt will be displayed in screen e Motion Detection Function For some special cameras the dome can auto track the moving things e 3D Location Function In dome effective zoom scope can zoom in and out any area on screen also can move any point to center Need work with our Matrix or DVR e Focus Rotate Auto Match Speed Dome can auto adjust pan and tilt rotation speed depending on the focus distan
3. Dome address code table under protocol PELCO P Oe A E A E E E E E E Dome address code table under protocol PELCO D Notice 1 1 means on status and 0 means off status 2 Dip switch for protocol PELCO P are the same while dip switch for PELCO D is slightly different PELCO_D protocol supports maximum 254 dome addresses Chapter 4 Installation Guide 1 Take out the bracket and unscrew the power box from the bracket 2 Thread cables across the bracket and connect them to the circuit board in the power box Install the dome body to the bracket screw up with 4 3 iunscrew the cover with the mark SET set communication protocol and addresses Screw up again with care to avoid water After the installation of dome body use two outer hexagon screws to tighten bracket and power box 4_ Attach the drill positioning paste to the wall and drill according to the paste and install expansion bolts ae sy ome FAL Install the dome body together with bracket and power box to the expansion bolts and tighten with screws 6_ Remove two screws from the power box and open it Thread power cablei 1AC220V through the water proof head on the left and RS485 and video
4. Move cursor to CLOCK and press Iris on to enter the submenu of CLOCK A1 DATE SETTING Move cursor to DATE SETTING and press Iris on to setup date Right left shift joystick to setup position and Upper and down shift joystick to setup increase and decrease of date Press Iris on to confirm B10 TIME SETTING Move cursor to TIME SETTING and others same with DATE SETTING Move cursor to SAVE SETTING and press Iris on to confirm If cancel current setting move cursor to BACK press Iris on back to the last submenu and cancel setting E UMANUAL CONTROL DOME SETTINGS MANUAL CONTROL SETUP LEFT LIndIT Al SETUP FIGHT LIMIT El MANUAL CONTROL ON eal STANDBY PRIVACY MASK CLOCK MANUAL CONTROL PAS SWORD DOME TITLE OTHERS BACK EXIT A1 SETUP LEFT LIMIT Move cursor to LEFT LIMIT and press Iris on to setup B1 SETUP RIGHT LIMIT Move cursor to RIGHT LIMIT and press Iris on to setup C1 MANUAL CONTROL Move cursor to MANUAL CONTROL and press Iris on to setup Move joystick to select on off F PASSWORD SETTINGS A1 Modify Password Move cursor to Modify password and press iris open button to password modification mode Input old password first and the default password is 111111 B1 Password protection Move the cursor to password protection and press iris open button to password switch setup move the j
5. Scale from1 to 15 The smaller the value is the higher the sensitivity is B1 FRAME RATE Setting of the frame inspection rate LOW MID HIGH C1 ENABLE Enabel or disable the auto tracking function Notice The auto tracking function is only for the speed dome with the camera module which supports auto tracking RESTART Main Menu Language Setup English System Setup Display setup Dome Setup Camera Setup Operation setup Reset Factory setup Help Press Iris Open to restart the dome FACTORY DEFAULTS Main Wen Language Setup English system Setup Display setup Dome Setup Camera Setup Operation setup Reset Factor setup Help Press Iris Open to resume all the setting to factory default settings HELP Language Setup English System Setup Display setup Dome Setup Camera Setup Operation setup Reset Factory setup Help Menu Quick Operating Instructions 1 Call upon preset 95 to open menu 2 Joystich up and down to control cursor to choose items 3 Press Iris Open to enter edit mode 4 Joystick up and down to edit tem parameters 6 Press Iris Open to confirm Bi Press Iris Close to cancel Press Iris Open to check all the HELP information about the menu settings
6. Control Type Move the cursor to Open Control Type and press iris open to select IR light control type move the joystick to set IR light control type as External synchronization Auto Internal Synchronization Auto Time Schedule Open Close Instruction of five control types 1 External synchronization Auto Open or close of IR LED will depend on light sensor completely and dome will control the day night switch When the light sensor detected that the environmental light is lower than the threshold of IR LED open IR LED will turn on and camera switch from color to black white When the environmental light is higher than the threshold of IR LED close IR LED will turn off and camera switch from black white to color NO Internal Synchronization Auto IR LED will turn on to the auto switch of camera from color to black white and turn off according to the light sensor control When the environmental light is higher than IR LED threshold value IR LED will turn off and D N of camera recover to auto 30 TimeUIR LED will turn on or offer according to the open and close time set by user 00 00 can be set in the time period For example Open time is set as 19100 and close time as 061 00 then the IR LED will turn on at 191100 and close at 060100 in the next morning
7. ON key on control keyboard to enter the edition mode of zone No move the joystick upward and downward to select number Then press IRIS ON to confirm C1 TITLE Move the cursor to TITLE and press IRIS ON to enter the edition mode of zone title D1 lt LEFT LIMIT gt Move the cursor to lt LEFT LIMIT gt and press IRIS ON to start setting the left limit of the current zone Then the sentence PRESS IRIS ON TO CONFIRM will appear on the screen Move the joystick and press IRIS ON to confirm E1 lt RIGHT LIMIT gt Move the cursor to lt RIGHT LIMIT gt and press IRIS ON to start setting the right limit of the current zone Then the sentence PRESS IRIS ON TO CONFIRM will appear on the screen Move the joystick and press IRIS ON to confirm F1 DELETE Press IRIS ON to delete the current zone F TIMING ACTION MOTION TIMING ACTION DDDDDDDDDDDDD IDDDIDDDDDDDDDD lt PRESET gt NO START STOP MOTIO lt SCAN gt r 1 00 00 00 00 NONE lt SEQUENCE gt 2 00 00 00 00 NONE lt PATTERN gt NONE 3 00 00 00 00 lt ZONES gt gt 00 00 00 00 NONE AF MING ACTION gt 5 00 00 00 00 NONE lt AUTO TRACKING gt 6 00 00 00 00 NONE 7 00 00 00 00 NONE 8 00 00 00 00 NONE OFF MON COPY BACK TIMING ACTION The user could set up the required functions during the designated time periods These functions include presets cruising track pattern tours and scanning Mover the cursor to the tim
8. cable through the water proof head on the right Connect cables to the circuit board double check order of connection to avoid damage from wrong connection After cable connection tighten the two heads if necessary app water proof glue to the heads Chapter 5 Functions Description 501 Features 1 Built in Decoder e Power off protection no data loss e Support both Chinese and English menu e Support one week and eight hours each day timing operation e Exact time display e Built in direction display function e 220 programmable presets e 8 cruising tracks each cruising track has 32 preset positions e 8 auto scan tracks the left and right boundaries an scan speed can be set e 8 privacy zones e 4 pattern tours each one with 180s memory e 3D location function e Guard location the dome can operate preset auto scan cruising and pattern tours functions after a short pause e Support PELCO_PLIPELCO_D protocols e RS 485 bus e Remote reset function 2 Integrated Universal Speed Change Rotator e Delicate stepping motor stable sensitive and accurate e 360 continuous pan without blind area e Stepless speed change auto zoom speed matching e Auto overturn function e Manual Speed 10 01 1120 s_iMax cruising speed 120 s oO Built in High Definition Day Night Camera e Auto iris auto back light compensation
9. to enter the setting interface of the OSD menu and move joystick select display enter submenu of display AUDOME Press Iris on to set DOME SETTING and with ON OFF option BUPRESET Press Iris on to set PRESET SETTING and with ON OFF 2SEC 5SEC 10SEC option CAUTO Press Iris on to set AUTO SETTING and with ON OFF 2SEC 5SEC 10SEC option DUZONES Press Iris on to set ZONES SETTING and with ON OFF 2SEC 5SEC 10SEC option E DATE TIME Press Iris on to set DATE TIME SETTING and move joystick to select ON OFF 2SEC 5SEC 10SEC option FLIPAN TILT Press Iris on to set PAN TILT SETTING and move joystick to select ON OFF 2SEC 5SEC 10SEC option Display position of setting contents on screen DISPLAY DISPLAY POSITION DOME OH FRESET ON AUTO OH ONES ON DATE TIMIE ON PANSTILT Of DISPLAY POSITION BACK EXIT ey DATE TIME DOME ZONES AUTO PAMSTILT BAL EXIT mot amp Move cursor to DISPLAY POSITION and press Iris on to enter submenu of DISPLAY POSITION A DATE TIME Press Iris on to set DATE TIME SETTING and move joystick to adjust DATE TIME until get best position Press Iris on to confirm Bi iDOME Press Iris on to set DOME SETTING and move joystick to adjust DOME until get best position Press Iris on
10. DELETE E1 lt TIMING ACTION gt lt AUTO TRACKING gt BACK EXIT A1 SEQ NO Move the cursor to SEQ NO and press the key IRIS ON key on control keyboard to enter the edition mode of sequence No move the joystick upward and downward to select number Then press IRIS ON to confirm B1 TITLE Move the cursor to TITLE and press IRIS ON to enter the edition mode of sequence title C1 START MOVE the cursor to START and press IRIS ON to start the current sequence D1 lt SEQUENCE SET gt Press IRIS ON to enter into the sequence setting SEQUENCE SEQUENCE DDDDDDDDDDDDD DDDDDDDDDDDDD SEQ NO 1 NO PRESET INTERVAL TITLE SEQ 1 gt gt 01 002 03 START 02 001 03 r lt SEQUENCE SET gt 03 baa E DELETE 04 05 06 KFEDITO1 003 BACK Move the cursor to EDIT and press IRIS ON to enter edition mode Move the joystick rightward and leftward to select item a When the lt gt is on the item NO move joystick upward and downward to select the NO of the preset in a sequence There are up to 32 presets in a single sequence b When the lt gt is on the item PRESET move the joystick upward and downward to select the preset NO you want to add in the sequence c When the lt gt is on the item INS move the joystick upward and downward to select edition mode as insert ok and delete d Press IRIS OFF to quit the edition E1 Delete Move cursor to delete ipr
11. IME and press Iris on to setup time move joystick and time can be set 30sec 2min 5min 10min Press Iris on to confirm B1 STANDBY MOTION Move cursor to STANDBY MOTION and press Iris on to setup motion move joystick and motion can be set preset 1 scan 1 crusing tour 1 pattern tour 1 no control Press Iris on to confirm C IPRIVACY MASK DOME SETTINGS STANDBY SETTINGS PRIMACY MASK 1 Al ENABLE OFF Bl SETUP Cl CANCEL Di STANDBY PRIVACY MASK CLOCK MANUAL CONTROL BACK EAIT PASSUNORD DOME TITLE OTHERS BACK EXIT A1 PRIVACY MASK Move cursor to PRIVACY MASK and press Iris on to setup Move joystick to select privacy mask and it supports 8 masks in total B1 ENABLE Move cursor to ENABLE and press Iris on to setup switch of privacy mask Move joystick to select the state on and off C1 SETUP Move cursor to SETUP and press Iris on to setup the position of privacy mask press Iris on to confirm Move cursor to the privacy mask press Iris on to enter the privacy size setting and move joystick to adjust size Press Iris on to confirm D1 CANCEL Move cursor to CANCEL and press Iris on to cancel selected privacy mask Di CLOCK DOME SETTING DATETIME DATE 2009 04 04 Al STANDBY TIME 7 25 Phl Bl PRIVACY MASE CLOCK MANUAL CONTROL PASSWORD DOME TITLE OTHERS BACK EXIT SAWE SETTING
12. IR HIGH SPEED DOME CAMERA User s Manual CONTENTS Chapter 1 Precautions cccsseceneeceneeeenseeenseeeneeceeneenees 3 Chapter 2 SUIruCuure siccoccncicvasstcccccaetscetevesncctcencicuccan eeeteticeteees 5 Chapter 3 Dome Settings ccccesseeeeseceesecenseeeneeseneeeeees 6 Chapter 4 Installation Guide ccccesseeeeseeceeeeeeseeeeeesenees 9 Chapter 5 Functions DeSCription sccccssesseseeeeseseseeeees 12 E TOC CS E A E E sneuesmmnotud iene conan eta sendarenccuneruetes 12 SEZ FUNCUON INSIFUCTION sson a 13 Chapter 6 Operation instruction ccccscsecesseeeeeseseeneeseeees 16 Chapter 1 Precautions e Please read this manual carefully before installation e Handle with care In transportation and storage process we need to prevent stress such as severe vibration and immersion to avoid any damage to the product This product must be carried disassembled and packaged either in delivery to users or in return delivery to the factory for repairing Damage caused by assembled transportation will not be covered by warranty e Install with care Handle the product carefully and gently Prevent such incorrect operations as stress severe vibration or may lead to mechanical failure affecting the overall performance of product Under the cover are advanced optical devices avoid direct hand touch for the sake of image quality The elect
13. ONES OFF DATETIME OFF PAN STILT OF FMSSECSSECMOSE lt DBISPLAY POSITION BACK EXIT DOME SETTINGS IR LED STANDBY ZPRMACY MAS Ke lt CLOCK gt PAS SWORD lt DOME TITLE O THER S MANUAL CONTROL BACK EIT DIGITAL 200M OFF BACKUGHT OFF IMASE FREEZE OFF VERTICAL IMAGE ON OO SPEED HIGH ADVANCED BACK EXIT It supports two language option Chinese and English Call upon preset position 95 to enter the setting interface of the OSD menu and move to language setting push Iris on to enter setting and move the joystick to switch Chinese English SYSTEM INFORMATION WAIN MEIJ ES Erre rrer rer LANGUAGE ENGLISH K SYSTEM INFORMATION gt DISPLAY SETUP POME SETTINGS gt SYSTEM INFORMATION m e o m m a aa l l e e a a a a a m l m n aa e a a e m l DOME ID 012346799 ADDERSS 011 BAUDRATE S600 N 5 4 PROTOCOL PELTO D CAMERAS MOTION RESTART FACTORY DEFAULTS HELF EXIT TY SYSTEM PAL TEMP 40 T AUDOME ID BUDOME ADDRESS C BAUDRATE D PROTOCAL EUTV SYSTEM FOINSIDE TEMP DISPLAY MAIN MENU DISPLAY LANGUAGE ENGLISH KF DOME ON A lt SYSTEM INFORMATION PRESET ON B KP lt DISPLAY SETUP AUTO ON C lt DOME SETTINGS ZONES ON D FEAE aA DATE TIME ON E FANTILT ON F DISPLAY POSITION G sMOTION RESTART FACTORY DEFAULTS HELF BACK HELF EAIT Call upon preset position 95
14. When dome rotates to 90 in vertical direction and the user wants to continue vertical rotation dome will automatically rotate by 180 chorizontally in 2 seconds Press iris on to make this function as On off D1 Auto Pause time Auto pause time means the time period in which the dome does not receive any pause code and after that dome will pause automatically and 5415030160 seconds option E1 Menu shut time With menu on menu will automatically shut after a period of vacant time Move the cursor to menu shut time and press iris on to setup mode move the joystick upward or downward to set time as 1 min 2 mins 5 mins 10 mins F1 Directi Zero Position Move the cursor to Direction Zero Setup and press iris on to direction zero position setup mode It shows press iris on to confirm and now you can control dome to zero position horizontally North press iris on to set this position as zero position Camera Setup Main Menu Camera Setup EF Auto Focus On Digital Zoom Off Backlight Compensation off Picture Freeze Off Wertical mirror image ott Language Setup English System Setup Display setup Dome Setup pr Camera Setup Operation setup Zoom Speed Low g m m eos gt Reset Factor setup Help Exit Advanced option Back Exit A Auto Focus Move the cursor to Auto Focus and press iris on to focus mode setup menu move the joystick upward and downwar
15. ce e Auto Flip The lens can auto flip when it rotates 180 e Preset Position Setting and Calling Preset function means the speed dome can memory current pan tilt angel focus zoom ect When need it can be called upon directly Our soeed dome support up to 220 preset positions e Auto Scan Users can set the left and right boundaries by control keyboard Then speed dome can scan between it It can set up to 8 groups scan path e Auto Cruising Users can program some preset positions into auto cruising sequence then the speed dome can track as it Each cruising tracks has 32 preset positions e Pattern Tour Speed Dome can memory 180s running path or 500 orders When start pattern tour speed dome can track as recording path It supports 4 groups pattern tour e Guard Location The dome will rotate back to preset position after a period of vacant time e Lens Control 1 Zoom Control Users can control zoom by keyboard to get near or far images 2 Focus Control System auto focus default Also users can manually focus Note can manually focus by keyboard and matrix please refer to keyboard or matrix user s manual Camera can t auto focus in following situation e Target is not in the center e Can not guarantee clear images when watch near and far target at the same time e Target is light objects Such as neon lighting spotlights and other bright objects e Target is behind the glass with droplets an
16. d dust e Target moves too fast e Large area targets such as walls e Target are too dark or inherently ambiguous 3 Auto Iris Control Auto sense ambient light and make quick adjustments 4 Auto Back Compensation In the bright background auto compensate light for the target and adjust the back light 5 Auto Manual White Balance Auto Manual adjust depending on the environment light changes 6 Day and Night Switch Only for Day Nigh Camera Speed dome camera can auto switch between color and black and white 7_iHigh Speed Dome Menu Setup Only for camera with menu Call upon preset No 95 to enter into menu setup interface Press Focus to choose menu items and press Iris to set menu contents Chapter 6 Operation instruction The user can call upon preset position 95 to enter the setting interface of the OSD menu OSD Menu Tree MAN WENI LANGUAGE ENGLISH 2Sy STEM INFORMATION lt DISPLAY SETUP DOME SETTINGS CAMERA lt MOTION gt RESTART FACTORY DEFAULTS HELF EXIT MO TION UtPRESET gt lt SCAN gt lt SEQUENCE gt lt PATTERM gt ZONES gt TIMIH G ACTION AUTO TRACEIH gt BACK EXIT Language fe CAMERA SETTING AIUTO FOCUS OFF SYSTEM INFORMATION DOMEID O123456 789 ADDRESS 00 1 BAUDRATE S600 M5 1 PROTOCOL PELCO O TY SYSTEM PAL TEMP C o OTHER BACK EXIT DISPLAY DOME OFF PRESET OFF AUTO OH Z
17. d to select focus mode selection B Digital Zoom Move the cursor to Digital Zoom and press iris on to digital Zoom switch setup Move the joystick upward and downward to switch on off digital zoom C Backlight Compensation Switch setup when the picture illumination is low open backlight compensation to higher it D Picture freeze Move the cursor to picture freeze and press iris on to picture freeze switch setup Move the joystick upward and downward to open or shut this function E Vertical Mirror Image Move the cursor to Vertical mirror image and press iris on to enter vertical image switch setup Move joystick upward and downward to select on off F Zoom Speed Move the cursor to Zoom Speed and press iris on to Zoom speed setup mode Move joystick to select camera zoom speed which can be set as Low speed moderate speed high speed G_jAdvanced option Camera setting ee N Digital Zoom Off Backlight Compensation off Picture Freeze Off Wertical miror image ott Zoom Speed Lowy Advanced Option ce White balance Auta R cain 208 B Gain 167 Illumination O1 Exposure mode anto Shutter speed 00 Kf Advanced option Back Exit Wide Dynamic OffLomyhoderatesHigh Initiation setup Back Exit A1 white balance mode Move the cursor to white balance mode and press iris on to enter setup mode Move the joystick
18. e duration to be set and press Iris Open to enter the setting mode Move the joystick Left Right to choose the option of exact time of Start Stop and Motion Move the joystick Up Down to edit the content and the press Iris On to confirm the operation A1 SCHEDULE NO The schedule of the timing action covers 7 days 1 week and 8 time periods 1 day B1 START C1 STOP D1 MOTION Timing action modes PRESET 1 8 SCAN 1 4 SEQUENCE 1 4 PATTERN 1 4 E1 ON OFF Press IRIS ON to enable or disable the timing action F1 COPY User can copy a schedule to other 6 days in a week Al Bl Cl D1 Gl F1 E1 G1 BACK Go back to upper menu Note The settings of each time periods can not overlaid and the time period can not be allowed to exceed 00 00 lf the use tries to control the dome during the TIMING ACTION then the operation will be stopped and if there is no operation after 25 seconds then the dome will resume the timing action G_AUTO TRACKING MOTION AUTO TRACKING DDDDDDDDDDDDD DDDDDDDDDDDDD lt PRESET gt lt SCAN gt lt SEQUENCE gt lt PATTERN gt lt ZONES gt ENABLE OFF Cl IF SENSITIVITY 06 Al FRAME RATE MID Bl lt TIMING ACTION gt R KAUTO TRACKING gt A1 SENSITIVITY Move the cursor to the option of SENSITIVITY and mover the joystick up and down to adjust the sensitivities Sensitivity of auto tracking funtion
19. ess Iris On to delete related sequence D PATTERN MOTION PATTERN DDDDDDDDDDDDD DDDDDDDDDDDDD pide gt PATTERN NO 1 panied TITLE PATTERN 1 lt SEQUENCE gt ee VE PATTERN gt pital lt ZONES gt lt gt lt TIMING ACTION gt DELETE lt AUTO TRACKING gt BACK EXIT A1 PATTERN NO Move the cursor to PATT and press the key IRIS ON key on control keyboard to enter the edition mode of sequence No move the joystick upward and downward to select number Then press IRIS ON to confirm B1 TITLE Move the cursor to TITLE and press IRIS ON to enter the edition mode of sequence title C1 START MOVE the cursor to START and press IRIS ON to start the current Pattern D1 lt SET gt Move the cursor to SET and press IRIS ON the enter pattern setting mode Then the sentence PRESS IRIS ON TO CONFIRM will appear on the screen Move the joystick to do PTZ move and press IRIS ON to confirm E1 DELETE Move the cursor to DELETE and press IRIS ON to delete the current pattern E lt ZONES gt MOTION ZONES DDDDDDDDDDDDD DDDDDDDDDDDDD aad K ZONE IS NOT SET a ZONE NO 1 lt SEQUENCE gt TITLE NO ZONE 1 lt PATTERN gt lt LEFT LIMIT gt Sa ZONES gt lt RIGHT LIMIT gt TIMING ACTION F plage DELETE lt AUTO TRACKING gt BACK EXIT BACK EXIT A1 ZONE INFORMATION B1 ZONE NO Move the cursor to ZONE NO and press the key IRIS
20. f IR LED in the timing mode of IR LED control F1 Zoom match Press Iris on to set zoom match When select open illumination and power of IR LED are matched with irradiation distance of camera With different zoom IR LED at its best control and adjust power automatically When select close start IR LED will depends on illumination set by user and it can t adjust automatically It is suggest selecting open zoom match G1 Illumination of light group 1 Light group 1 is outside lane long distance IR LED press Iris on to set illumination value H1O Illumination of light group 2 Light group 2 is centre circle medium distance IR LED press Iris on to set illumination value 11 illumination of light group 3 Light group 3 is inside lane short distance IR LED press Iris on to set illumination value When close zoom match user should adjust irradiation distance by himself Note When open zoom match it can t adjust illumination of Light group 1 Light group 2 and Light group 3 manually BUSTANDBY SETTINGS DOME SETTINGS STANDBY KP STANDBY TIME 41MIN Al KP STANDBY STON DAY MOTION NO CONTROL Bl PRIVACY MASE CLOCK BACK MANUAL CONTROL EAIT PASSWORD DOME TITLE OTHERS BACK EIT Move cursor to STANDBY SETTINGS and press Iris on to submenu of STANDBY SETTINGS A1 STANDBY TIME Move cursor to STANDBY T
21. n Setup Move joystick to initiation setup and press iris on to recover camera parameters as default Operation Setup Operation Setup hain Menu Cr Preset Position Auto Scan Cruising Language Setup English System Setup Display setup Dome Setup Pattern Tour Area Indication Schedule operation Auto Tracking Camera Setup Operation setup Reset Factory setup Help back Exit A Preset Operation setup Preset Position Ce Preset No 004 Al Title Setup Preset 01 EJ Call Cl Setup D Delete El E Preset Position Auto Scan Cruising Pattern Tour Area Indication Auto Tracking Back Exit Back Exit A1 Preset Position Number Move joystick to preset position number and press iris on to setup mode Move joystick upward and downward to set number This dome supports 220 preset positions 1 64 100 255 B1 Title Setup Move cursor to title setup and press iris on to setup Submenu to make preset position title setup C1 Call Move cursor to call and press iris on to call related preset position D1 Setup Press iris on to preset position setup mode and it shows Press iris on to confirm User can make operation to dome and press iris on to Save current position E1 Delete Move cursor to delete and press iris on to related preset position B Auto Scan Operation setup Auto Scan Setup Preset Position Ep Auto Scan Cruising Pattern To
22. oystick upward and downward to open or shut password protection When password protection is open input password before opening the menu GODome Title Setup Dome position IF light setup Standby setup Privacy protection Clock setup Manual control boundary F asaword protection Dome title setup Other options Back Exit Input information English capital Dome title setup Input information English capital ABCD EFGHII ELMNOPORS T OY Ways of Confirm Cancel Al BI Cl Di ABCD EFGHI J KLMNOPORST Uw WA YY 4 a Contirm Cancel E Input Information English capital abcdefegehli 4 kKlmnopqrst UVwWRHY2 Contirm Cancel Dome tithe setup Input information Humber 01234567489 Confirm Cancel Dome title setup E Input information Special Character o LTE e lt gt amp L Confirm Cancel Come title setup rm Input ner en Chinese ABCD EFGHI J KLMNOPORST UVWKXYZ t le Coantirm Cancel Input method instruction 1 Move the cursor to input information and press iris open to information edit mode Move the joystick left and rightward to move the cursor lt and press iris on to delete the character by the cursor and press iris off to exit edit mode 2 Move the cursor to input method option which is one line below Input Information and press iris on to input method setu
23. p mode Move the joystick upward and downward to chose the input methods which contain English Capital English lower case Chinese Number Special character 3 Move the cursor to one line below input method option and press iris on to character input mode Now selected character twinkles and move the joystick to select characters press iris on to input the twinkling character to the position of in the Input information block H Other Options Dome position Other options Cp Temperature control Auto Al Preset freeze Off El Auto flip On C Auto Stop Time 15 secs Ti Menu shut time 5 mins El IR light setup Standby setup Privacy protection Clock setup Manual control boundary Password protection Come title setup EF Other options Back Exit Zero position setup F Back Exit Move the cursor to other options and press iris on to its submenu A1 Temperature Control Mode Move the cursor to temperature control mode and press iris on to temperature control setup Use the joystick to select Cooling Auto Heating Off and press iris on to confirm input With IR LED on fans will be set as always on mode B1 Preset Freeze In calling preset setup menu move the cursor to Preset Freeze and press iris on to make setup Move the joystick to set On Off and press iris on to confirm C1 Auto Flip
24. rical installation must comply with safety standards with use of dedicated power adapter Control signals and video signals should maintain a sufficient distance from high voltage equipment or cables in the transmission process if necessary take anti lightning anti surge and other protective measures Keep power off until the completion of all installation e Do not dismanile parts Do not dismantle internal parts please turn to qualified maintenance professionals to carry out repairs e Do not put any object into the product Make sure that there is no metal object or flammable materials inside the product Such objects or materials may lead to fire short circuit or damage If water or liquid flow into the product turn off the power and disconnect the power cord immediately and then negotiate with the company Be careful to protect the camera Avoid the rain sea erosion e Keep the product away from electric or magnetic fields If the product is placed near TV radio transmitters electromagnetic devices electric motors transformers loudspeakers in the vicinity the electromagnetic fields generated by them would interfere the image e Do not point the camera at strong light Regardless of power on off status do not point the camera at the sun or very bright objects do not point the camera at bright stationary objects for a long time otherwise it will cause unrecoverable damage to the camera CCD e Maintenance with care It i
25. s advised to avoid collision or vibration Do not use strong or abrasive detergents to clean the dome body When cleaning up dirt use dry cloth if dirt is uneasy to remove swab with a neutral detergent If there is sticky dust on the lens please use the special lens paper e Working Environment Power AC 100 240V 0 5A Communication port RS485 Environmental temperature 25 150 IR off 25030001R on Moisture lt 95 L1Non condensing Atmospheric pressure 8611106KPa Note make sure outdoor installation meets water proof requirements Chapter 2 Structure Side view Front view QO O Chapter 3 Dome Settings Protocol Setting This product supports two protocols PELCO PLIPELCO D and two baud rate 9600BPS 4800BPS 2400BPS Protocol dip switch is bit 1 3 of SW2 Baud Rate Setting Baud rate setting dip switch is bit 4 5 of SW2 Dome Address Setting 8 bit dip switch SW1 at dome side is for setting dome address Dome setting adopts binary system the 8 bit is the highest the 1 bit is the lowest Total 255 dome addresses could be set
26. to confirm CUZONES Press Iris on to set ZONES SETTING and move joystick to adjust ZONES until get best position Press Iris on to confirm DUAUTO Press Iris on to set AUTO SETTING and move joystick to adjust AUTO until get best position Press Iris on to confirm EU PAN TILT Press Iris on to set PAN TILT SETTING and move joystick to adjust PAN TILT until get best position Press Iris on to confirm DOME SETTINGS DOME SETTING MAIN MENMU LAHGUAGE ENGLISH SYSTEM INFORMATION DISPLAY SETUP DOME SETTINGS CAMERA STANDBY PRIVACY MASEK CLOCK MANUAL CONTROL PASSWORD DOME TITLE OTHERS BACK EXIT MOTION RESTART FACTORY DEFAULTS HELF EXIT O mg A N gt Call upon preset position 95 to enter the setting interface of the OSD menu and move joystick to DOME press Iris on enter submenu of DOME AUIR LED SETTINGS DOME SETTINGS IR LED SETTINGS KP IR LED STANDBY PRIVACY MASE CLOCK MANUAL CONTROL FASSWORD OFEN CONTROL TYPE OW Al ENVIRONMENT THRESHOLD WALU ES DE EJ SENSITIVITY 0S CI OFEN TIME 7 00 Bhd D CLOSE TIME 6 00 AM E ZOOM MATCH OFF F ILLUMINATION OF LIGHT GROUP 1 10 Gl ILLUMINATION OF LIGHT GROUP 2 10 H ILLUMINATION OF LIGHT GROUP 3 10 BACK EXIT DOME TITLE OTHERS BACK EXIT Move the cursor to IR LED and press iris open to submenu A1_Open
27. upward and downward as Auto Manual Indoor outdoor Note For different cameras the setup options might be different B1 R Gain Move the cursor to R gain and press iris on to setup mode Move joystick upward and downward to set the R gain value Note Only if the white balance is set as manual setup is available C1 B gain Move the cursor to B gain and press iris on to setup mode Move the joystick upward and downward to set B gain value Note Only if white balance is set as manual setup is available D1 lllumination Move the cursor to illumination and press iris on to enter setup mode Move the joystick upward or downward to set illumination value E1 Exposure mode Move the cursor to exposure mode and press iris on to setup mode Move the joystick upward and downward to select parameters which can be set as Auot Manual Sutter priority iris priority lllumination priority Note For different cameras the mode options might be different F1 Shutter Speed Move the cursor to Shutter speed and press iris on to enter setup mode Move joystick upward and downward to set shutter speed value G1 Wide Dynamic Move the cursor to wide dynamic and press iris on to enter setup mode Move joystick upward and downward to select parameters as Low Moderate high Note For cameras without wide dynamic function this option setup is not available H1 Initiatio
28. ur Area Indication Auto Tracking Back Exit pe Scan No 4 Al Tithe Setup Scan 1 Gl Start C Set lett boundany O Set right boundary El Scan Speed 20 F Back Exit A1 Scan Number Move the cursor to scan number and press iris on to setup mode Move joystick upward and downward to set scan number This dome supports 8 auto scans B1 Title Setup Move cursor to Title Setup and press iris on to enter scan title setup submenu to set the title C1 Start Scan Move cursor to start scan and press iris on to start related scan D1 Left Boundary Setup Move cursor to Set left boundary and press iris on to setup mode it shows press iris on to confirm User can make operate dome to expected position and press iris on to save Current position as left boundary E1 Right boundary setup Move the cursor to set right boundary and press iris on to enter setup mode it shows press iris on to confirm User can make operate dome to expected position and press iris on to save current position as right boundary F1 Scan speed Move cursor to scan speed and press iris on to enter setup mode Move the joystick upward and downward to set the speed level as 1 30 Ci Sequence SEQUENCE DDDDDDDDDDDDD SEQ NO 1 MOTION DDDDDDDDDDDDD lt PRESET gt lt SCAN gt TITLE SEQ 1 Bl x SEQUENCE gt START C1 lt PATTERN gt lt SEQUENCE SET gt D1 lt ZONES gt
Download Pdf Manuals
Related Search