Stations - NuSound Technology Group
Contents
1. Stations IPedge VIPedge Feature Description 4 25 14 DSS Key Assignments Copy Icon Timer Ring Down IPT Data Station IP Address Type CAUTION It is recommended the number of stations created is set to equal or less than the number of licenses provided in the system IPedge systems and VIPedge solutions will allow stations to be created beyond the limit of system licensing up to the limit of the system capacity This allows the administrator to create DNs that will be used temporarily by a pool or users or for IPedge systems for purposes of survivability The administrator must consider the following when stations are created in excess of available licences stations attempting to register with the system may be denied based on the number of available licenses An IPT can support up to three DSS units up to the system maximum Enter 000000 six zeroes as the Equipment Number for each DSS you are assigning to this station After the saving the DSS assignment select the Key tab then click on the View DSS key assignment link The Key assignment tab is used to assign functions to the programmable feature buttons on the IP5000 Series telephones e Right click on a key to program that key e Left click a key to display the programming on a key In the Key Assignment tab click on the Copy icon In the dialog box click on Select All Key All of the keys will be highlighted Click to deselect key you do2. 1 32 default 1 Note Refer to System feature Day Night Service Destination Restriction Level for Day 1 mode Value 1 16 default 1 Destination Restriction Level for Day 2 mode Value 1 16 default 1 Destination Restriction Level for Night mode Value 1 16 default 1 Note Refer to System feature Day Night Service Facilities Restriction Level for Day 1 mode Value 1 16 default 1 Facilities Restriction Level for Day 2 mode Value 1 16 default 1 2011 2014 Toshiba Information Systems Inc All Rights Reserved All product service and company names are trademarks registered trademarks or service marks of their respective owners This document and the information included herein is subject to change without notice 1 9 Stations IPedge VIPedge Feature Description 4 25 14 FRL Night QPL Day 1 QPL Day 2 QPL Night LCR Group Dialing Progress Tone Call Pickup Bearer Capability Display DN CESID Facilities Restriction Level for Night mode Value 1 16 default 1 Note Refer to System feature Day Night Service Queuing Restriction Level for Day 1 mode Value 1 16 default 1 Queuing Restriction Level for Day 2 mode Value 1 16 default 1 Queuing Restriction Level for Night mode Value 1 16 default 1 Note Refer to System feature Day Night Service Least Cost Routing Group Number Value 1 16 default 1 Type of Tone to hear after dialing LC
3. not want to copy Generally you do not want to copy the PDN key Select the target Server and the Target Stations to which you will copy the key assignments Click on OK to copy the assignments Set the timers for this station If this is to be a Ring Down station set Emergency Ring Down to Enabled Set the Emergency Ring Down Timer to the number of seconds to wait before the IPT station rings down to the Emergency Ring Down Destination Enter the DN up to five digits of the station in this node that this station will call when the timer expires This section sets up the network parameters for a DN Assign Fix for a fixed IP address Assign Any for DHCP operation 2011 2014 Toshiba Information Systems Inc All Rights Reserved All product service and company names are trademarks registered trademarks or service marks of their respective owners This document and the information included herein is subject to change without notice 1 15 Stations IPedge VIPedge Feature Description 4 25 14 Station IP Address Auto Assign Station ID Station Terminal Authentication Mode DTMF Tone Duration Station MAC Address Voice Packet Table If the Station IP Address is set to Fix enter the IP Address of the station The possible values are Permitted Not Permitted or Don t Care Default Use Automatic when the IP telephone has no Station ID Use Not Automatic when IP telephone has station ID in the IP telephone settin
4. R access code Tone Types Dial Tone Default Entry Tone or Silence The station privilege to activate Call Pickup Permitted Default Group Only Not Permitted ISDN Bearer Capability the PSTN is expecting from non ISDN stations 3 1kHz Audio data and speech or Speech Important Notes 1 Standard telephone type data devices modems G3 fax signals must be set for 3 1 kHz audio on ISDAN lines 2 The IPedge Net network does not support 3 1 kHz data and speech all standard telephone equipment must be set to Speech if making calls calls on IPedge Net Possible values Audio Default or Speech This number will display on the LCD of telephones when calling or when called by this station or VM port If this station is a member of a Hunt Group that has a Pilot Number and Pilot Display Number set in Station gt Station Groups Group Type Hunt Group select Pilot Number and Number to Display respectively enter the HG Pilot Display Number in this field This is necessary for proper operation of Hunt Groups including centralized Voice Mail over IPedge Net Dial String of 1 5 digits E911 Calling Party Information identifier for this station CESID 2011 2014 Toshiba Information Systems Inc All Rights Reserved All product service and company names are trademarks registered trademarks or service marks of their respective owners This document and the information included herein is subject to change without notic
5. SV file Field CSV Column Description Prime DN DirectoryNumber Prime Directory Number Type DirectoryType Station Type Name to Display Name Displayed Name DisplayDN DisplayDN Displayed DN VM MW Center Port VMMWCernterPort Pilot DN for Voice Mail ToneRingVoice Announce ToneRingVoiceAnnounce 1 Tone first 0 or 2 Voice first COS Day 1 COSDay1 Day 1 Class of Service System Call Forward SystemCallForward System Call Forward Template number VMID Code VoiceMaillD Voice Mail box for this station Call History Memory CallHistoryMemory Number of calls saved in the history for this station 0 100 Station SpDial Bins StationSpeedDialAlloc Number of Station SpDial Bins Network Calling Number NetworkCallingNumber CLID sent 32 max EMail Address EMail Address Email address for VM from UM SIP Terminal URI SipURI SIP terminal URI SIP Terminal Password SipURIPassword SIP Terminal Password Import Data data in the file will be entered into the IPedge VIPedge system 1 2 3 4 The Import Data dialog box will open Click on the Browse button to find the CSV file to import Select the server that will import the file Click on a station then click on the Change a Prime DN icon Any other Click on the Import Data icon to input a CSV file The station assignment Check mark the Override existing records box
6. Stations IPedge VIPedge Feature Description 2 7 14 Stations IP Telephone The IPedge VIPedge system supports Toshiba IP5000 Series IP telephones and SIP telephones A PC based IP attendant console is also available for Pedge systems Single line analog telephones and fax machines may be connected through an FXS gateway on IPedge and ViPedge systems The IPedge VIPedge system supports the following telephones IPedge IP5000 Series telephone IPT product line e 1IP4100 SIP DECT e Valcom Door Phone Refer to the IPedge Accessories manual e Valcom paging Refer to the IPedge Accessories manual e CyberData VoIP Intercom door phone viPedge e 1IP5131 SDL IP5531 SDL and IP5631 SDL IP e _LM5110 add on module e 1IP4100 SIP DECT e Valcom Door Phone Refer to the IPedge Accessories manual e Valcom paging Refer to the IPedge Accessories manual Toshiba offers many IP Telephone models with backlight displays except the IP5022 SD full duplex soeakerphones and Gigabit Ethernet The IP telephones connect to the IPedge system via the LAN or WAN These telephones do not use the System power supply so there is no power restriction to limit the number of IP telephones that can connect to an individual IPedge system The telephones can be powered by a local power supply or by PoE Power over Ethernet These telephones operate on the network at 10 100Mbps and 1000Mbps as shown in the table below Model Networ
7. another IPT or SoftIPT at another location If disabled this DN cannot be logged out remotely and log into another IPT SoftIPT If enabled this DN can be logged out remotely and logged into another IPT SoftIPT station This parameter enables and disables IP User Mobility Not Applicable Enter the type of Calling Name for Outgoing Name Delivery This field is only valid in the case of the Outgoing Call for ISDN PRI Trunk of NATIONAL and NORTEL e None Not send the Calling Name to ISDN PRI Trunk e LCD Send the station name assigned by Station Station Assignment Basic Tab Name to Display to ISDN PRI Trunk 2011 2014 Toshiba Information Systems Inc All Rights Reserved All product service and company names are trademarks registered trademarks or service marks of their respective owners This document and the information included herein is subject to change without notice 1 13 Stations IPedge VIPedge Feature Description 4 25 14 Specified Caller ID System Speed Dial Supplement SIP Inband Mode SIP Channel Number Supporting Assignments Flexible Feature Access Codes e SPECIAL Send the Special Name assigned by Trunk Calling Number CNIS Presentation Special Name Assignment to ISDN PRI Trunk e DEFAULT Send the Default Calling Name assigned by Trunk Calling Number Calling Number Identification Display Name to ISDN PRI Trunk Enable Station Name is displayed after answered to Interna
8. at will be used temporarily by a pool of users or for IPedge systems for purposes of survivability The administrator must consider that when more stations are created than there are licenses available stations that try to register with the system may not be allowed to register based on the number of licenses available It is recommended the number of stations created always be equal to or less than the number of licenses provided in the system Station Programming Station gt Station Assignment Add a Station Click on the Add icon to add a new station Edit a Station Click on a station in the list then click on the Edit icon to change a station 2011 2014 Toshiba Information Systems Inc All Rights Reserved All product service and company names are trademarks registered trademarks or service marks of their respective owners This document and the information included herein is subject to change without notice 1 6 Stations IPedge VIPedge Feature Description 4 25 14 Change a Prime DN stations with this DN on a PhDN button will be updated Delete a Station station Create a Range of DNs Click on a station in the list then click on the Delete icon to remove a Click on the Create PDN Range icon then enter the DN range the extension type Voice mail Box options and EMPA role Export Data Table 1 Station Assignment Export values Click on the Export Data icon output the Station Assignment data as a C
9. ature Description 4 25 14 Station SpDial Bins Set System Speed Dial VM MW Center Port System Call Forward Create New mailbox VMID Code Voicemail Password Select Role COS Day 1 COS Day 2 COS Night DRL Day 1 DRL Day 2 DRL Night FRL Day 1 FRL Day 2 The number of station speed dial bins allocated to this station Possible values 0 100 maximum 100 per station Privilege to set System Speed Dial numbers Enabled or Disabled default Disabled Enter the Directory number or Pilot number of the voice mail system System Call Forward group number Group number 0 48 Default 0 If the Create New mailbox is check marked default the Enterprise Manager will create the mailbox automatically when the station assignment is saved The Voice Mail box that will answer when this station calls VM and when calls to this PDN are forwarded to VM The password for this mailbox Default DN 997 Check mark the Assign Personal Administration Role to assign an Enterprise Manager Personal Administration EMPA Role Select a Phone User role from the drop down menu below EMPA Normal User and EMPA Super User are default roles When the system administrator adds additional roles Note Click on Show advanced configuration to show all parameters Class of Service for Day 1 mode Value 1 32 default 1 Class of Service for Day 2 mode Value 1 32 default 1 Class of Service for Night mode Value
10. e 1 10 Stations IPedge VIPedge Feature Description 4 25 14 Emergency Call Group Remote CF DND Password Travel COS Change TGAC Override Call Waiting Tone Dial Directory Door Over DND Network COS Auto OCA Up to 16 digits default no data The Emergency call group that this station belongs to 1 default 128 Password to remotely set or cancel DND or Station Call Forward from another IPedge VIPedge station default no data Privilege to Change the Traveling Class of Service Override Code Enabled or Disabled default Disabled Trunk Group Access Code Override for Attendant console Enabled or Disabled default Disabled Enable If you want your telephone speaker to beep when you are on an existing call and receive another call Also if this feature is enabled the beep tones can be sent to your telephone Handset Headset as follows On your LCD telephone press 369 and Hold key simultaneously Select 0 and press key FB01 to turn its light ON then press Hold again and go off and on hook Disable If you do not want your telephone to beep when you are on an existing call Enable default or Disable The beep tone can be two beeps or continuous as set in Station Station Assignment Preference Show advanced configuration Call Waiting Tone Enable The telephone User Name will appear in the large display telephone Direct SS dial directory Enabled or Disabled default Enabled N
11. edge Feature Description 4 25 14 PROGRAMMING All stations on the IPedge system are either Toshiba IP5000 Series telephones or SIP telephones The IP5131 SDL IP5531 SDL P5631 SDL IP telephones and the IP4100 SIP DECT are compatible with the VIPedge solution The CyberData VoIP Intercom door phone is compatible IPedge systems only Analog stations require an FXS gateway These stations are programmed in the IPedge system as SIP stations IP5000 Software The IPT software in the IP5000 Series telephones must be Requirements am e 5K4 M2P2 or later small screen phones or e 5K9 M2P2 or later large screen phones IPedge Licenses All stations in an IPedge system require licenses I CP USR I CP SIP2 or CP AUX IPedge and Enterprise Manager allows the system administrator to assign stations up to the system capacity even if that number is greater than the number of licenses The ability to assign station DNs beyond the number of licenses allows the administrator to create a user pool of DNs for certain survivability purposes The administrator must consider that more stations can be assigned than can register with the system viPedge Licenses Each telephone on the VIPedge solution require a V BIZ STD license Over Subscription IPedge systems and VIPedge solutions will allow stations to be created beyond the limit of system licensing up to the limit of the system capacity This allows the administrator to create DNs th
12. g In System gt System IP Data Automatic Assignment of Station ID is the same parameter for system When Don t Care is set System gt System IP Data Automatic Assignment of Station ID precedes in Station gt Station Assignment IPT Data tab Auto Assign Station ID this parameter Enabling System gt System IP Data Automatic Assignment of Station ID is equal to using permitted in Station gt Station Assignment IPT Data tab Auto Assign Station ID Disabling in System gt System IP Data Automatic Assignment of Station ID is equal to using Not Permitted in Station gt Station Assignment IPT Data tab Auto Assign Station ID When the IP telephone requests to connect to an IPedge system with no station ID the IPedge searches for a PDN that is set in this parameter to permitted and sends the PDN to the IP telephone The IP telephone records it in the IP telephone setting Set to Apply to reserve a PDN for the IP Telephone now connected When Apply is set terminal authentication by MAC address of IPT is valid If other IPT with the same PDN is connected to the network the IPedge system will reject the registration because the MAC address of the new IPT is different When set to Do not Apply you can move the PDN from a IPT to another IPT and another IPT can be connected to the IPedge server When Do Not Care is set terminal authentication for this telephone is determined by System System IP Data Terminal Aut
13. he table below Model Network Speed IP5500 Series 10 100 M IP5600 Series Pano ere IP5000 Series 1000 Mbps The IP telephones operate in the manner of a network switch not a hub 2011 2013 Toshiba Information Systems Inc All Rights Reserved All product service and company names are trademarks registered trademarks or service marks of their respective owners This document and the information included herein is subject to change without notice 1 3 Stations IPedge VIPedge Feature Description 4 10 14 so the telephone may be connected directly to the LAN and the PC connected to the PC jack on the base station Attendant Console The Attendant Console available only for the IPedge system runs on Windows XP Professional or Windows 7 32 bit operating system The Console has a built in softohone for Pedge and uses a Computer Supported Telephony Application CSTA interface Each Attendant console requires the I CP AUX the basic port license and the CP ATT license which is bundled with the Toshiba supplied Attendant Console PC software The I CP ATT license must be ordered separately to enable the Console to be installed on a Dealer Customer supplied PC The latest Attendant Console software is available at no charge on Toshiba FYI Third Party The IPedge supports a variety of third party peripherals in order to meet Peripherals specific business needs Refer to the IPedge and ViPedge General Description
14. hentication The Terminal Authentication settings Apply or Do Not Apply in this program overrides the Terminal Authentication any setting in Program System System IP Data Terminal Authentication Sets the duration of DTMF tones sent from an IPT in milliseconds from an IPT Default 200 ms This is a display only field This will show the MAC address of the station when it is connected and operating correctly For G 711 assign table 1 For G 729A assign table 2 2011 2014 Toshiba Information Systems Inc All Rights Reserved All product service and company names are trademarks registered trademarks or service marks of their respective owners This document and the information included herein is subject to change without notice 1 16 Stations IPedge VIPedge Feature Description 4 25 14 Display Software Version Number of IPT SIP Terminal URI SIP Terminal Password Connection to Media Relay Server Secondary Audio Codec for Full IP station Secondary Voice Packet Index Base UDP Port for IP Telephone Media Channel This is a display only field Set the Uniform Resource Identifier of the SIP terminal URI is to identify the IP telephone in the system You can use A Z a z and 0 9 up to 32 characters as the URI It has to be unique in the system Set password for terminal authentication of the SIP terminal This password is checked for terminal authentication when registration is performed from the SIP
15. herals in order to meet Peripherals specific business needs Refer to the IPedge and ViPedge General Descriptions for a additional information Also refer to the IPedge Accessories manual Polycom End Points The IPedge system supports a variety of end points from Polycom Refer to the Pedge General Description for a list of end points that have been qualified to work with IPedge The CyberData Voice over IP VoIP Intercom product is targeted for door phone emergency phone and access control applications The VoIP Intercom provides adaptive full duplex voice operation along with network adjustable speaker volume and microphone sensitivity Providing door closure and tamper alert signaling the VoIP Intercom has a tamper resistant design that allows the unit to be mounted securely and safely Network downloadable firmware supports simple system upgrades 2011 2013 Toshiba Information Systems Inc All Rights Reserved All product service and company names are trademarks registered trademarks or service marks of their respective owners This document and the information included herein is subject to change without notice 1 2 Stations IPedge VIPedge Feature Description 4 10 14 OVERVIEW The IPedge VIPedge system supports Toshiba IP5000 Series IP telephones and session initiation protocol SIP telephones A PC based IP attendant console is also available for IPedge systems Single line analog telephones and fax machines may be con
16. ial tone when it has a message waiting indication and you will receive a busy tone burst when your telephone is in the DND mode Disable This station will receive normal dial tone when it has a message waiting or when it is in the DND mode Enabled or Disabled default Enabled Activate Message Waiting Enable This station is allowed to activate station to station message waiting on other stations by dialing the other station number plus 7 8 or 9 or by pressing the Msg key Disable This station can not activate station to station message waiting on other stations by dialing the station number plus 7 8 9 or by pressing the Msg key This parameter does not apply to Voice Mail ports they use the special Message Waiting access codes Enabled or Disabled default Enabled Tenant Number Enter the Tenant number to which this PDN should be assigned 1 8 default 1 Hook Switch Recall Not Applicable Auto Campon to PDN Enable to allow auto campon to this PDN when busy and called by a CO line even if the CO line group has auto campon disabled in Trunk Trunk Groups Incoming Show advanced configuration 2011 2014 Toshiba Information Systems Inc All Rights Reserved All product service and company names are trademarks registered trademarks or service marks of their respective owners This document and the information included herein is subject to change without notice 1 12 Stations IPedge VIPedge Feature Descrip
17. k Speed IP5500 Series IP5600 Series IP5000 Series 1000 Mbps 10 100 Mbps The RJ45 PC jack can connect the user s PC to the IP telephone The IP telephones operate like a switch as opposed to a hub so the telephone can be connected directly to the LAN and then a PC can be connected to the telephone PC jack to connect to the LAN through the telephone 2011 2013 Toshiba Information Systems Inc All Rights Reserved All product service and company names are trademarks registered trademarks or service marks of their respective owners This document and the information included herein is subject to change without notice 1 1 Stations IPedge VIPedge Feature Description 2 7 14 Attendant Console The Attendant Console available only for the IPedge system runs on a PC with Microsoft Windows XP operating system Professional or Windows 7 32 bit operating system The Console has a built in softphone for IPedge and uses a Computer Supported Telephony Application CSTA interface Each Attendant console requires the l CP AUX the basic port license and the I CP ATT license which is bundled with the Toshiba supplied Attendant Console PCs and software The I CP ATT license must be ordered separately to enable the Console to be installed on a Dealer Customer supplied PC The latest Attendant Console software is available at no charge on Toshiba FYI Third Party The IPedge supports a variety of third party perip
18. l call Disable Station Name is changed to DN number after answered to internal call Select whether System Speed Dial supplement for IP stations should be enabled or disabled Default This parameter is for SIP station extensions only When set to Enable SIP extension can transmit a DTMF signal to a trunk while ringing the calling party This parameter is for SIP station extensions only This sets the maximum number of channels for a SIP station If set to a value higher than the limitations for the device the station will still be limited to the maximum number it was designed to handle SIP call limits e Outbound Max number of channels multiplied by two e Inbound Max number of channels System gt Class of Service LCR DR gt DR Guide Access the Destination Restriction Wizard LCR DR gt LCR Guide Access the Least Cost Routing Wizard The time a call remains parked until the systems signals the parking station Park Recall Timer Range 10 600 seconds Default 120 seconds System gt Flexible Access Code Access code 33 Park a call in a specific orbit Access code 32 Retrieve a parked call Access code 5 29 Call Park Answer 2011 2014 Toshiba Information Systems Inc All Rights Reserved All product service and company names are trademarks registered trademarks or service marks of their respective owners This document and the information included herein is subject to change without notice 1 14
19. must be SIP aware The router must provide one to one translation Refer to the IPedge Install manual for information about System Ports and NAT traversal 2011 2014 Toshiba Information Systems Inc All Rights Reserved All product service and company names are trademarks registered trademarks or service marks of their respective owners This document and the information included herein is subject to change without notice 1 18 Stations IPedge VIPedge Feature Description 2 7 14 HARDWARE IP 5000 Series and SIP telephones connect to IPedge via an IP network connection Single Line telephones analog stations can connect to an IPedge system via an FXS gateway 2011 2013 Toshiba Information Systems Inc All Rights Reserved All product service and company names are trademarks registered trademarks 1 19 or service marks of their respective owners This document and the information included herein is subject to change without notice Stations IPedge VIPedge Feature Description 2 7 14 CAPACITY The maximum capacities are shown in the table below AVAILABILITY IPedge Station Peripherals System Capacities Stations EP Server EC Server EM Server PC Attendant consoles 2 2 6 IP5000 Series stations SIP stations Voicemail aa meee ea and Meeting y y y 8 per station 8 per station 8 per station DSS Consoles 24 per 24 per 24 per system system system Add on m
20. nected through an FXS gateway on IPedge and ViPedge systems IP Telephone The IPedge VIPedge system supports the IP5000 Series telephone IPT and IP4000 Series product line PolyCom Series 8440 550 321 SLT or SIP stations may hold the role of conference master for a conference call Note The IP4100 SIP Phone may participate in conference calls on IPedge and VIPedge systems The IP4100 cannot initiate a conference call conference master on the VIPedge syste The IP5131 SDL IP5531 SDL P5631 SDL IP telephones and the IP4100 SIP DECT and CyberData VoIP Intercom door phone are compatible with the VIPedge solution On ViPedge systems the following are supported e P5x31 SDL phones and LM5110 add on module e IP4100 SIP DECT e CyberData Intercom door phone e Valcom Door Phone Refer to the IPedge Accessories manual e Valcom paging Refer to the IPedge Accessories manual Toshiba offers many IP Telephone models with backlight displays except IP5022 SD full duplex speakerphones and Gigabit Ethernet The IP telephones connect to the Pedge VIPedge system via the LAN or WAN These telephones do not use the system power supply so there is no power restriction to limit the number of IP telephones that can connect to an individual Pedge VIPedge system The telephones can be powered by a local power supply or by Power over Ethernet PoE These telephones operate on the network at 10 100Mbps and 1000Mbps as shown in t
21. nts have been saved Note Click on Show advanced configuration to show all parameters This section is available only after the Basic data has been saved Enter an existing PDN or enter a PDN you wish to create for a new station IPT Toshiba IP Telephones e SIP SIP Telephones e Attendant PC Attendant Console IPedge systems only e Voice Mail Voice Mail voice path MAS only e ACD Announce Required for ACD announcements e SIP VM IPedge Messaging The name that will display on this telephone when idle and display on the calling and called stations during intercom calls Enter the CLID telephone number that should be sent for this station when making external calls through the IPedge Net network 32 digits max When this station makes outgoing calls through the IPedge Net network this number will be sent over the IPedge Net network to the terminating PSTN connected to the far end node providing this is allowed by the PSTN This number will be displayed as the Caller ID number at the terminating external telephone This number is not sent to local PSTNs connected to the node from which the call is originated 2011 2014 Toshiba Information Systems Inc All Rights Reserved All product service and company names are trademarks registered trademarks or service marks of their respective owners This document and the information included herein is subject to change without notice 1 8 Stations IPedge VIPedge Fe
22. o resolve differing audio codec settings on the IP telephones When a call is established between IP telephones the system will check the assignment of secondary audio codecs If there is matching assignment it will be applied If there is not the user will hear reorder tone Possible values are 1 128 The base UDP port for the IP telephone media channel Possible values are 1026 65532 Default 49154 Note Only even numbers can be set 2011 2014 Toshiba Information Systems Inc All Rights Reserved All product service and company names are trademarks registered trademarks or service marks of their respective owners This document and the information included herein is subject to change without notice 1 17 Stations IPedge VIPedge Feature Description 4 25 14 Group EMPA Phantom DN Locator SYSTEM PORT NOTES Use this tab to assign this DN to a Call Pickup Group or Paging Group SIP stations can not be a member of a Paging Group This tab is used to assign the Phone Display Language and the EMPA Language To display a list of Phantom DNs select Station gt Phantom DN To display a list of the DNs a PhDN is assigned to select Station gt Phantom DN Click on the PhDN then click on the Locate icon IPTs use ports in the 21000 29999 range for RTP IPedge systems support SIP stations on the same sub net When SIP stations are on the other side of a router from the IPedge or viPedge system that router
23. odules LM5110 KM5020 g 160 990 Simultaneous calls 40 148 576 1 Capacity could be reduced by the addition of Messaging and or Meeting applications IP5000 Series The IPT software in the IP5000 Series telephones must be 5K9 M2P2 or later viPedge Station Peripherals System Capacities Stations Up To 60 Users More Than 60 Users IP5000 series stations P4100 DECT total 60 per System 500 per System Add on modules on IP Telephones 53 400 Simultaneous calls 96 413 RESTRICTION Any number of IP5000 Series telephone up to the system capacity can be programmed into the system Only as many stations as there are licenses can be registered 2011 2014 Toshiba Information Systems Inc All Rights Reserved All product service and company names are trademarks registered trademarks or service marks of their respective owners This document and the information included herein is subject to change without notice 1 20
24. ot Applicable Network Class Of Service number Used when calling across an IPedge Net network connection 1 32 default 1 OCA occurs automatically when making a call to a busy station that allows OCA calls to be received Enabled or Disabled default Enabled 2011 2014 Toshiba Information Systems Inc All Rights Reserved All product service and company names are trademarks registered trademarks or service marks of their respective owners This document and the information included herein is subject to change without notice 1 11 Stations IPedge VIPedge Feature Description 4 25 14 Originate OCA The privilege to make OCA calls to other stations Important This privilege must be disabled for all Voice Mail and Auto Attendant ports Enabled or Disabled default Enabled RSTU Supervision Not Applicable CO Park amp Hold Enabled When this station parks a line call CO or GCO buttons of the parked line that appear on other stations will be on hold This will allow the other stations to press the CO or GCO button to pickup the parked call Disabled When this station parks a line call CO or GCO buttons of the parked line that appear on other stations will appear busy This will prevent the other stations to press the CO or GCO button to pickup the parked call Enabled or Disabled default Disabled MW amp DND Dial Tone Enable When you access internal dial tone your telephone will receive stuttered d
25. s for a additional information Also refer to the IPedge Accessories manual Polycom End Points The IPedge system supports a variety of Endpoints from Polycom Refer to the IPedge General Description for a list of Endpoints that have been qualified to work with IPedge The IPedge system supports CyberData Voice over IP VoIP Intercom is targeted for door phone emergency phone and access control applications The VoIP Intercom provides adaptive full duplex voice operation along with network adjustable speaker volume and microphone sensitivity Providing door closure and tamper alert signaling the VoIP Intercom has a tamper resistant design that allows the unit to be mounted securely and safely Network downloadable firmware supports easy upgrades 2011 2013 Toshiba Information Systems Inc All Rights Reserved All product service and company names are trademarks registered trademarks or service marks of their respective owners This document and the information included herein is subject to change without notice 1 4 Stations IPedge VIPedge Feature Description 2 7 14 Stations Refer to the appropriate user manual for the telephone 2011 2013 Toshiba Information Systems Inc All Rights Reserved All product service and company names are trademarks registered trademarks or service marks of their respective owners This document and the information included herein is subject to change without notice 1 5 Stations IPedge VIP
26. terminal You can use A Z a z and 0 9 up to 64 characters It doesn t have to be unique in the system Toshiba recommends using a password for every SIP terminal to help prevent unauthorized users connecting to the system IPedge systems with R1 6 1 and later software VIPedge systems R1 4 3 and later require a password with the following characteristics e Minimum of eight characters and e One uppercase letter A Z and e One lowercase letter a z and e One number 0 9 The word password is not a legal entry and will not be permitted Set the connection mode to the Media Relay Server during port forwarding NAT Either Auto default or Manual For the IPT Data connection to use the Media Relay Server set this to Manual Refer to the Media Relay Server Feature Description the possible values are G 711 G729A Default or None IP telephones have two built in codecs Select the audio codec that will be used in this IP telephone The G 711 codec provides the highest voice quality but uses the most network bandwidth about 115kbps per IP telephone when in use The G 729A codec provides less voice quality but uses the least amount of network bandwidth about 29kbps per IP telephone when in use The Voice Packet Table must be set properly for the codec assigned The IPedge system provides a peer to peer connection when an IP telephone directly communicates with another IP telephone A negotiation method is required t
27. tion 4 25 14 LCR PDN Code Speaker OCA IP Phone Login Password Security Code Transfer Registration Station Connecting Equipment Calling Name Type Disable to not allow auto campon to this PDN when called by a CO line if the CO line group has auto campon disabled in Program Trunk Trunk Groups Incoming Show advanced configuration Note Auto campon will always occur on the PDN if the calling CO line group has auto campon enabled in Trunk Trunk Groups Incoming Show advanced configuration regardless of how this option is set Auto campon will be applied or not to PhDNs according to the PhDN owner PDN setting for this option Enabled or Disabled default Enabled Enter the number of digits that determine when to send the LCR PDN code The PDN code is registered in the LCR Modified Digits Table Four digits or three digits default three Enable or disable Speaker OCA on an IP telephone Enabled or Disabled Default This feature determines whether a password is required for phone login Enable Applies a phone login password Disable No login password is needed This feature is used for both EMPA and for IP User Mobility as well If this value is set to Enable a password is required in Security Code Enter the EMPA password for this station This security code is also the IP Mobility Login password 16 Characters Max This feature determines whether the DN will be able to be logged out and logged into
28. to cause the imported file to overwrite existing database records Un check this box to prevent the file import from changing existing database entries 2011 2014 Toshiba Information Systems Inc All Rights Reserved All product service and company names are trademarks registered trademarks or service marks of their respective owners This document and the information included herein is subject to change without notice 1 7 Stations IPedge VIPedge Feature Description 4 25 14 IPedge Net Station Survivable Station Station Assignment Preference Prime DN Station Type Name to Display Network Calling Number 5 Click on OK Check mark the Select IPedge Net Station box if applicable This will send the IPedge network DN information for this station to the other nodes IPedge Net is supported on IPedge systems only For a survivable station check mark the box and select the survivability Secondary Server The station data will be set in the secondary survivability server This requires another IPedge system as the secondary survivability server and licenses for the surviving stations in the secondary server Available in Pedge R1 2 and later systems On ViPedge systems the survivability is an automatic function It requires no programming or licenses Within the Station Assignment there are eight tabs Not all stations will require assignments in every tab All tabs are visible only after the Basic assignme
Download Pdf Manuals
Related Search