Home

FA-D2 Instruction Manual

Contents

1. Dip Switch Menu Description Settings Pulse or Tone Dial Out Select for Pulse 1 Dialing only if you do not have Touch Tone oa Rona ai dialing capability at the monitored location pise ee Pae ae Power Alarm Monitoring you can turn this UP DOWN feature off or on with this switch If you do not wish to ever receive an alarm phone call related Power alarm monitoring is Power alarm monitoring is Fahrenheit or degrees Celsius Select F or C to a power failure put switch in the UP position OFF ON Call Out Frequency When the FreezeAlarm goes into alarm mode and begins calling out it UP DOWN 3 will call the three programmed phone numbers 2 hour call out 15 minute If no one has canceled the alarm call out it will feo ete call out begin the sequence again in either 15 minutes or q y frequency in 2 hours according to the setting selected Call Out Ring Count If the FreezeAlarm received no answer when calling a phone number this switch determines how many times the phone should ring before the FreezeAlarm hangs up the call and moves on to the next programmed number This saves on long distance charges Select the 3 ring option and if _ 4 the FreezeAlarm is calling an answering ae Hoa machine set to answer on 4 or more rings the FreezeAlarm will hang up before the answering machine answers saving on any long distance charge This may not work in all areas as some telephone com
2. The auxiliary alarm input is in alarm mode or your custom recorded auxiliary alarm message will play here instead Please check conditions at your monitored location immediately This entire message will repeat again and be followed by To cancel the alarm call out enter your four digit security code followed by the pound key You will be given two chances to enter the correct security code If incorrect two times the FreezeAlarm will say Incorrect Security Code good bye and then it will hang up If you enter the correct security code the FreezeAlarm will respond with 25 3 6 3 7 The alarm call out is now canceled You are now in the main menu From here you can either access main menu functions or hang up If the Alarm Call Out Has Been Canceled By Someone Else Since the FreezeAlarm can call multiple phone numbers there is a chance that a person at one of the other call to locations may have canceled the alarm call out prior to your phone call to the FreezeAlarm If that occurs you will still hear the current status and all the alarm conditions when you call into the FreezeAlarm but you will not be given a chance to cancel the alarm call out Instead the FreezeAlarm will ask for your four digit security code to access the main menu You can either enter your security code to check current conditions again or hang up and determine the steps needed to correct the alarm conditions It is even possible th
3. ceesseeeeeeeeeee 39 3 1 0 INITIAL SET UP BEFORE YOU PROCEED Read the Following Warranty Statement Please read the entire warranty statement on page 31 of this manual Minimum Installation e You should program at least one 1 telephone number to call if there is a temperature power or battery emergency The unit will operate without any telephone numbers programmed and you will be able to remotely access the unit to check current status information at the remote location but without any call to telephone numbers programmed you will not receive alarm calls from your FreezeAlarm e You must use a back up battery A 9V Lithium Battery is highly recommended as a backup battery This battery is not included with the FreezeAlarm but is available at most hardware stores or directly from Control Products Other back up battery options are discussed in the Appendix e IT IS CRITICAL THAT YOU TEST YOUR FREEZEALARM to make sure the unit calls out during an alarm condition Follow the test procedure on Page 18 1 1 Operating Environment The Deluxe FreezeAlarm should operate in a dry clean area that is near an AC power outlet and a telephone wall jack The FreezeAlarm is designed to operate in temperatures from 20 to 140 F 7 to 60 C You should not install the FreezeAlarm in areas where there is strong electrostatic electromagnetic or radioactive fields Do not install the FreezeAlarm in an area with high humidity chemi
4. Review or Program Pager Display Information If one or more of the phone numbers you program are to a numeric pager you can program a numeric message that will be displayed on the pager when it calls This can be any numeric message up to 15 characters in length MENU OPTION 2 Review or Program the Temperature Alarm Setpoints This menu option lets you set the high and low temperatures at which you want the FreezeAlarm to dial out for a temperature alarm The factory setting for the low temperature alarm is 45 whether you have the unit set to read temperatures in Fahrenheit or Celsius The high temperature alarm setpoint is 100 F or C You can select a temperature alarm setpoint anywhere from 66 to 301 F 54 to 149 C The FreezeAlarm can read temperatures to you in either F or C based on dip switch number six NOTE FOR A NEGATIVE TEMPERATURE ALARM SETPOINT To enter a negative temperature alarm setpoint you will need to precede the desired negative temperature with a For example if you want a temperature alarm setpoint of negative 15 press 1 5 on your telephone keypad when requested This will be played back to you by the FreezeAlarm as negative fifteen degrees MENU OPTION 3 Review or Program the Security Code The security code is used for two functions by the FreezeAlarm 1 Password Protection to prevent unauthorized persons from accessing your FreezeAlarm remotely The factory set security code is 9999
5. We offer replacement temperature sensors The part number is TS 10 FA Order from our customer service department Double check that all phone numbers are entered correctly Did you include a 1 or area codes if necessary Check the phone line connection Is the phone cord plugged into the FreezeAlarm and wall jack correctly Do you have a single line telephone line If doing a test did you get the FreezeAlarm to go into alarm Is the red alarm light on If not re do the test based on the procedure outlined in the manual Try adding a pause in front of the telephone number A pause is two stars in front of the phone number Check to make sure your phone is set to the tone mode so key presses are in touch tone mode Try pressing the keys for different lengths of time either longer presses or very short presses Press slowly with 1 2 second breaks between key presses If this still does not work try another phone or dial in remotely to program If the tones are not being accepted when you dial into the FreezeAlarm try a different phone or even a cell phone The FreezeAlarm is not answering Either the phone lines are down or the power is out and the battery has died preventing the FreezeAlarm from answering the phone I cannot cancel the alarm call out The FreezeAlarm keeps calling me 29 Are you entering the correct security code Do you hear the message that the alarm call out has been canceled If not your secu
6. t know how to cancel the alarm call out it will immediately start calling the second number If the alarm call out isn t canceled by the second call to person it will immediately move to the third number If no one at that call to number cancels the alarm call out the unit will wait either 15 minutes or 2 hours and then start the sequence all over again The only way to stop the FreezeAlarm from calling the call to phone numbers is to have a person at one of the call to numbers cancel the alarm call out as described later in this manual or go to the monitored location and switch the toggle switch to STANDBY and then back again to ON This resets the FreezeAlarm 22 3 5 The FreezeAlarm is persistent and always wants you to know that an alarm has occurred even if the alarm condition has corrected itself For example The power goes out long enough so that the FreezeAlarm notes a power alarm and begins calling your call to phone numbers If none of the people at the call to numbers are home to answer the call and the power is eventually restored the FreezeAlarm will continue to call the call to phone numbers until the alarm call out has been canceled Multiple Alarms It is possible to receive multiple alarm calls from your FreezeAlarm even if you believe you have canceled one of the alarms Here are some examples Example 1 If you receive a power out alarm and cancel that alarm call out your FreezeAlarm will still be running on b
7. It is highly recommended you change this and write the security code down on the front of this manual and in a safe place at all your call to locations Security codes must have four numeric digits 2 Location Identifier The security code also provides a location code to the person answering an alarm call from the FreezeAlarm The FreezeAlarm will note that there is a specific alarm condition at location H H This allows a service or monitoring company to quickly identify which location is calling so they can dispatch service personnel to your monitored location most efficiently This is also an easy way to hear what your security code is if you have forgotten the code If you have forgotten your security code there is no way to remotely change the code You will need to go to the monitored location plug a phone into the front of the FreezeAlarm go to menu option 3 in the programming menu and review or change the security code at that time If you are receiving alarm calls from your FreezeAlarm the unit will tell you the security code during the alarm message MENU OPTION 4 Review or Program the Number of Rings Before the Unit Answers This is also referred to as the incoming ring count When you call your FreezeAlarm from a remote location the FreezeAlarm will be waiting to hear a specified number of rings before it picks up You can select the number of rings you wish the FreezeAlarm to hear before it will pick up Throug
8. Sensor and Battery section on page 8 for more information 3 Pick up the handset on your Programming Phone The FreezeAlarm will begin talking to you with the Main Menu Main Menu You are now in the main menu 16 4 For current status press I For remote switch status press 2 To enter the Program Menu press 3 Current Status Provides the current status of the various sensors The current temperature is XX degrees the power is on or off the battery is at X XX volts and the auxiliary alarm input is currently in not in alarm mode Remote Switch Status This is where you can easily change the position of the remote switch status This can be used to switch between one thermostat set at a lower temperature to another thermostat set at a higher temperature allowing you essentially warm up a space before you arrive It can also be used to turn on or off a remote device by telephone Use of this feature is detailed in Appendix B on page 39 Program Menu It is recommended you listen to all the menu options once before programming to become familiar with the program menu At the end of the menu it will pause and then start playing from the beginning again IMPORTANT After programming is completed flip the front ON STANDBY switch to the ON position for normal operation of your FreezeAlarm A IMPORTANT WARNING After Programming you must return the front toggle switch to the ON position or the FreezeAlarm will not ca
9. 5 F C higher than the actual temperature The connection at the end of the temperature sensor that normally plugs into the FreezeAlarm is a male RJ9 connection This is a smaller connection than a regular telephone line You can either make or purchase an RJ9 extension wire or simply splice in additional four conductor telephone wire in between the sensor and RJ9 connection ends Note that if you are extending sensors outdoors and or underground consideration should be given to using shielded wire inside metal conduit Both shield and conduit should be connected to a ground This helps prevent stray voltage from interfering with the sensor s signal Extending the Phone Cord Length You may use a longer telephone extension cable to place the FreezeAlarm unit at a further distance from an available telephone jack The FreezeAlarm has been tested to operate on a phone line indoors at a distance of 1 000 feet 304m Make sure you use four conductor telephone wire This is available at most hardware and discount department stores If you are extending this to the outdoors consideration should be given to using shielded wire inside metal conduit Both shield and conduit should be connected to a ground Back Up Battery Options The FreezeAlarm has a connection for a 9 volt battery which can supply power to the unit should the AC power be disconnected or out A fully charged 9 volt lithium battery will provide 10 to 15 hours of operation During th
10. CONTENTS 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 Initial Set Up 1 1 Operating Environment icici iae ari iia a iias 4 1 2 Knowing your way around your FreezeAlarm eesesesseseesseeessesesseeeesresesseeees 4 1 3 What you need before you Start sseseseeesesseseesesrsrsrsrterererrerrerstrsrsrrrteresersesreee 6 1 4 Use of a DSL Cable or Other Digital Phone Service ee eeeeeseeeeseeeeeeeeee 7 1 5 Dip Switches and their function 0 cee ee eeceseceeeeecseceeesecseeecneesecaeeeessesneeeeens 7 1 6 Connecting cords sensor and battery eee ceessesecseseeceeeeecsseeeeeeceaeeeeeseeneeeeens 8 1 7 Connecting additional alarm devices to the auxiliary alarm input 9 1 8 Using the Remote Switch Feature T1 T2 amp COM connections 10 Programming 21 Quick PLO Stain ereenn nri a r e E teases 10 2 2 Explanation of Program Menu Options ceeescsesscsseeeceseeeeeeceeeeeeeeneeeee 12 2 3 Programming your FreezeAlarm Locally At the location where your FreezeAlarm is located se seeeneeeeeeeeeeeeeeereeeees 16 2 4 Programming your FreezeAlarm Remotely By calling into it from a mobile cell phone or a remote location 0 17 2 9 Testing your Freeze A lari is ssesses ces cv snsevee E a e r E E nie 18 Operation of your FreezeAlarm 3 1 Standby Mode vsascssiesccssssssscssecssesshesssesssie testis seswscbasssusbassbosseedsstustescsovtetateeuesoes 19 3 2 Calling into your
11. If a number is return to phone number menu gt amp z 9 Zo is foie aes he identified as a 3 2 gt o8 lotlowed by the pager number 2 A g 3 o 2a pound key when playing 4 9 D r Ed 3 2 2 1or2 back the D s 2 2 3 v number play Pager display information is 3 2 the word currently XXXX empty To 3 If this is a pager number PAGER after change press 0 to return to 2 press 1 if not press 2 the number main pager display menu li press 9 d A To review or program the low y 9 The security code is currently xxxx To change press zero or press 9 to return to the main menu the high temperature alarm setpoint press 2 To return to the main menu press 9 tone phone enter the number to be displayed on the pager during an alarm call out 0 y A rg 4 followed by the pound key Enter the security code followed by the pound key The high low temperature alarm setpoint is now xxx degrees To change press zero or press 9 to return to the temperature setpoint menu The FreezeAlarm is gt currently set to answer on _ xx rings To change press 0 gt gt 0 or press 9 to return to the main menu A 0 y Enter the number of rings followed by the pound key Enter the high low temperature alarm setpoint followed by the pound key gt The Fre
12. devices not ringing in response to an incoming call In most but not all areas the sum of REN s should not exceed five 5 0 To be certain of the number of devices that may be connected to a line as determined by the total REN s contact your local telephone company The REN for this product is shown above and is also identified as part of the FCC product identifier shown on the label on the back of your FreezeAlarm The REN for other devices will be identified on a label on the product in the FCC product identifier or listed separately If there is a product identifier number it will be in a format as US AAAEQ H TXXXX The is the REN number shown without a decimal point e g 03 is a REN of 0 3 If this FreezeAlarm causes harm to the telephone network the telephone company will notify you in advance that temporary discontinuance of service may be required But if advance notice isn t practical the telephone company will notify the customer as soon as possible Also you will be advised of your right to file a complaint with the FCC if you believe it is necessary The telephone company may make changes in its facilities equipment operations or procedures that could affect the operation of the equipment If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service If trouble is experienced with your FreezeAlarm for repair or warranty informatio
13. in alarm mode either the contact has closed or opened This message will only play during alarm call out to your programmed call to phone numbers This message overrides the factory default message of The Auxiliary Alarm Input is in alarm mode Reinstating the Factory Default Messages If you record a custom Greeting Alarm or Auxiliary Alarm Message but decide you would rather have the factory default message instead you can reinstate the factory default alarm or greeting message 1 Select the menu option 6 to record messages 2 Press 1 To Review or Program the Alarm Greeting Auxiliary Message 15 2 3 3 Press 0 so you can change the Alarm or Greeting Message 4 The FreezeAlarm will begin playing the menu prompt shown below While this message is playing press the pound key The menu prompt will stop and the FreezeAlarm will now play the factory default greeting or alarm message Begin Recording after the tone When you have finished recording press the pound key Recording over old messages To record over an old message follow the instructions to program a new message and simply record a new message The old message will automatically be erased MENU OPTION 7 To Review or Modify Auxiliary Alarm Setting The auxiliary alarm input is used to plug in additional alarm devices such as our WaterAlarm WA 20 and our Motion Sensor MA SO1 These devices are designed to close an alarm contact when they go
14. into alarm Some other alarm devices are designed to open an alarm contact when they go into alarm This menu option allows you to change whether the Auxiliary Alarm Input should monitor for a closed or open contact The table below shows you what to select based on what your alarm device will do when it goes into alarm If your alarm will close when an alarm condition occurs such as our Select the Auxiliary Alarm input to be WaterAlarm or MiniAlarm Motion Normally Open Sensor If your alarm will open when an alarm condition occurs Select the Auxiliary Alarm input to be Normally Closed Programming Your FreezeAlarm Locally At the location where the FreezeAlarm is located 1 Make sure the toggle switch on the front of the FreezeAlarm is on the STANDBY position for programming The ALARM light on the front of the FreezeAlarm will begin flashing 2 Make sure you have a regular single line telephone plugged into the front of the FreezeAlarm where it says PROGRAM PHONE This will be referred to as your Programming Phone NOTE After programming is completed unplug the Programming Phone from the PROGRAM PHONE jack on the front of the FreezeAlarm A phone left plugged into the front of the FreezeAlarm cannot operate as a regular telephone If you want to share a phone with your FreezeAlarm in the same wall jack you will need a telephone jack line splitter See the Connecting Cords
15. modify one of our many standard products or our in house engineering staff and state of the art manufacturing team can build a project from the ground up Please contact our customer service department to arrange a personal visit from one of our representatives posted in facilities through the United States or visit our website at www controlproductsinc com Limited Warranty Warrantor Dealer Distributor Retailer Manufacturer Warranty and Remedy We believe the FreezeAlarm is a superior product Although we take extreme pride in producing and testing a product that will function properly we cannot guarantee that there will never be a defective unit or that a unit will function on all the thousands of phone lines and communication equipment in existence For this reason it must be clear that the Warrantors are not insuring your premises or guaranteeing that there will not be damage to your person or property if you use this Product If you are not comfortable with our Limited Warranty or completely satisfied with the Product we encourage you to return the unused Product for a full refund within 30 days of purchase Thank you for your understanding One Year Limited Warranty Control Products Inc warrants its product to be free from defects in material and workmanship under normal use for one year and is not responsible for consequential damages or installation costs of any nature In the event that the Product does not conform to thi
16. press 9 them back to this changed status of hen zero is ssed return nu and play To review or program phone numbers press 1 To review or program the temperature alarm set point press 2 To review or program the security code press 3 To review or program the number of rings before the unit answers press 4 To review or program the number of minutes the power should 9 be out before calling with a power alarm press 5 To review or record messages press 6 To review or modify the auxiliary alarm setting press 7 To return to the main menu press 9 remote switch b gt 4 To review or program first telephone number press 1 To review or program second telephone number press 2 To review or program third telephone number press 3 To review or program pager display information press 4 To return to the main menu press 9 A 1 20r3 A 9 Vv First Second Third telephone number is currently temperature alarm setpoint press 1 To review or program Using the keypad on your touch A a Aa a A a xxxx empty pager to change press zero or press 9 to 0 return to the main telephone number menu 9 9 9 9 9 9 ii S pe pe T p Using the keys on To review or program pager display gt 2 D ga bod touchstone PAGER INFO information press 2 or press 9 to x 3 B 23 p na pan e
17. restocking charge Returns resulting from errors by the seller are not subject to this charge All returns must include evidence of original purchase showing purchase date The RGA should be clearly marked on the outside of the package containing the product To request an RGA call Control Products at 952 361 4101 and ask for Customer Service Failure to have an RGA may result in lost product or significant delays in handling your return Products without an RGA clearly marked on the outside of the package are not the responsibility of Control Products Inc 32 8 0 FCC amp UL CERTIFICATION STATEMENTS FCC PART 68 This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA On the back of your FreezeAlarm is a label that contains among other information a product identifier in the format US AAAEQ TXXXX If requested this number must be provided to the telephone company A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA A compliant telephone cord and modular plug is provided with this product It is designed to be connected to a compatible modular jack that is also compliant See installation instructions for details The REN is used to determine the number of devices that may be connected to a telephone line Excessive REN s on a telephone line may result in the
18. single telephone line will be required Consult the supplier of your phone system if you 6 1 4 1 5 encounter problems or have questions The FreezeAlarm cannot be used on a party line or a pay telephone line It is extremely important that you test dial out to all your call to telephone numbers 5 You will need a standard telephone to program your FreezeAlarm using the front Programming Phone jack A cordless phone should work but if you encounter problems locate a wired phone or program your FreezeAlarm remotely by dialing into it using a cell phone or a phone from another location You only need this phone to program the FreezeAlarm locally After programming is completed this phone is unplugged from the FreezeAlarm and is not needed for the FreezeAlarm to operate 6 If you wish to use one telephone jack for both the FreezeAlarm and a regular telephone you will also need to purchase a dual telephone jack line splitter This will turn a single telephone jack on your wall into two separate telephone jacks to plug in both the FreezeAlarm and a regular single line telephone These are available from any hardware or discount department store or directly from Control Products Use of a DSL or other Digital Phone Services If you have a DSL phone line or a phone line through your cable company you should install the appropriate filters on the phone line Please note that the FreezeAlarm is designed to work and is certified by the FCC
19. the call well before the FreezeAlarm answers A NOTE If you leave your FreezeAlarm in the STANDBY mode the FreezeAlarm will not call you if there is an alarm and you will be unable to call into your FreezeAlarm from a remote location 19 3 2 Calling into your FreezeAlarm One of the best features of the FreezeAlarm is the ability to remotely check the current temperature power status auxiliary alarm status and battery status at your monitored location You can also change the remote switch status for turning up and down heat or turning on or off another device remotely You can also change any of the program menu settings including the call to phone numbers if desired If you have an answering machine or voice mail at the monitored location make sure you read the section Use of an Answering Machine or Voice Mail at the Monitored Location in section 3 3 on page 21 before proceeding The following is the procedure for remotely accessing your FreezeAlarm to check current conditions or change program menu options To Check Current Conditions at your Monitored Location 1 Call the telephone number of your monitored location where the FreezeAlarm is located 2 When the FreezeAlarm answers you will hear the following Hello this is your Automated Monitoring System Or you will hear your custom greeting message that was recorded earlier The current temperature is degrees the power is on or off and the battery is at volts
20. the programmed call to phone numbers have been called successfully you must still cancel the alarm call out Make sure the temperature sensor is out of the ice and at room temperature again or plugged back into the SENSOR location on the back of the FreezeAlarm To cancel the alarm and reset the FreezeAlarm flip the front toggle switch to the STANDBY position and then again back to the ON position The red alarm light on the front of the FreezeAlarm should go out Your FreezeAlarm is now ready for operation 3 0 OPERATION OF YOUR FREEZEALARM 3 1 Standby Mode On the front of your FreezeAlarm is a toggle switch with STANDBY or ON positions The STANDBY position is primarily used for programming purposes only The ON position is where your FreezeAlarm should be once programming is completed In STANDBY mode you can access the main and programming menus but you cannot remotely dial into your FreezeAlarm and more importantly it cannot call you if an alarm condition occurs Some users may want to temporarily flip the switch to the STANDBY mode if they are visiting the monitored location and don t want the possibility of an incoming call being picked up by the FreezeAlarm We don t recommend the STANDBY mode for this scenario and instead suggest you change your incoming ring count selection to a higher number so virtually all incoming callers will either go to your answering machine voice mail or you have sufficient rings to allow you to get to
21. to operate on a standard telephone line provided by your local telephone company A DSL Cable or Digital phone service may work If you have questions or problems using one of these types of phone services contact your phone service provider A Important During power failures many alternative phone services such as DSL and Cable provided phone service DO NOT WORK These phone services require that power be on in the premises for the phones to operate The FreezeAlarm will NOT be able to call out if the power is out when utilizing these phone services If you have a standard POTS telephone line power is supplied to this line by the telephone company and is usually not affected if power is out at the monitored location Dip Switches and Their Functions 1 DONOT plug in any components or battery until directed to do so in the manual 2 Make sure the toggle switch on the front of the FreezeAlarm is on the STANDBY position for programming The ALARM light on the front of the unit will flash when in STANDBY mode 3 Select the dip switch options per the Dip Switch Menu found below 4 Ignore the ON or OFF labels on the dip switches themselves Use only the following table for proper explanation of each dip switch setting UP means the switch should be pointing towards the top of the FreezeAlarm case and DOWN means the switch should be pointed towards the bottom of the case All the switches should come from the factory in the DOWN position
22. to save battery power during a power failure This could also signal that something serious has happened to your FreezeAlarm Check power connections and if you still have no lights call Customer Service I am getting a temperature reading of 302 F 150 C or a temperature reading of 50 F XX C If you are receiving a very high temperature sensor reading your temperature sensor is either unplugged not plugged in correctly or it has been damaged Replacement sensors are available Sensor part number is TS 10 FA The alarm light is blinking This means your FreezeAlarm is in the STANDBY mode In this mode it cannot answer incoming calls and it cannot dial out during an alarm 30 7 0 WARRANTY AND REPAIR INFORMATION 7 1 7 2 Contacting Us For more information about your FreezeAlarm contact one of our Customer Service Representatives at Control Products Inc 1724 Lake Drive West Chanhassen MN 55317 Phone 952 448 4101 Fax 952 361 9420 Email customerservice controlproductsinc com Internet www controlproductsonline com Model Number Information The model number of your FreezeAlarm is the FA D2 Replacement temperature sensors are available Order the TS 10 FA from Customer Service Custom Design and Modifications Since 1985 Control Products Inc has been designing and manufacturing unique exciting and technologically advanced electronic control circuits for both commercial and consumer use We can
23. Deluxe FreeZzeA larm model Fa D2 Thank you for purchasing our Deluxe FreezeAlarm model FA D2 If you have any questions or concerns about this product feel free to contact us Our phone number web sites and email addresses are listed on page two GENERAL DESCRIPTION AND FEATURES The Deluxe FreezeAlarm is a remote monitoring device that can automatically call up to three phone numbers when the temperature inside any space gets out of range if the power fails or if the back up battery requires replacing The FreezeAlarm uses a series of menu options that are accessible by pressing the buttons on your Touch Tone phone All menu prompts and alarm messages are in English In addition to calling you if an emergency condition exists at your monitored location the Deluxe FreezeAlarm also offers the following features e Quick Status Check allows you to remotely check the current temperature power status and battery status from any phone in the world all within a 15 second phone call e Remotely turn up the heat in your vacation home or cabin by switching between a thermostat set at a lower temperature to one set at a higher temperature This feature does require some integration with your existing heating system e Monitor for the presence of water leaks and floods by adding our WaterAlarm WA 20 water sensors They provide additional peace of mind from leaking pipes and fixtures burst washing machine hoses leaking water heaters or ov
24. FreezeAlarm to check status amp change program settings 20 3 3 Use of an Answering Machine or Voice Mail at the Monitored Location 21 3 4 What happens during an alarm esesceeeeceseceeesecseescceesecaeeeesaecaeeseenees 22 3 5 How to Cancel the Alarm Call Out and reset your FreezeAlarm 23 3 6 Replacing the Back Up Battery 0 eee eceseeseesesseceeeseceeeeeceeeesecsaeeeeeaeeeeaes 26 3 7 Disconnecting the FreezeAlarm for seasonal storage ceseeeceeeeeeereeeeeees 26 Other Installation Notes 4 1 Answering machines at the call to locations escescceseeseeeeceeeeeeeenteeeees 27 4 2 Extending the temperature Sensor ecceecceecceseceseceseceeeceeceecaeeeseeeneeneeeenens 27 4 3 Extending the phone cordier eei ea EE Ees 27 4 4 Back Up Battery Options esseesesesseeseeeeeressrreererersesrtrterersssrrerstssesenrereereeeses 27 Commonly Asked Questions ccccccscssessesscsseesceseeecesecaceseceeeeeaeeeeeseeasesesneeats 28 Trouble Sh oo ng a ankerrena tal ees reor Ee E eaa rE EEEa OSE Eaa Et 29 Warranty and Repair Information 7 1 Contacting Us ncn cco een ine ea TA 31 7 2 Limited Warranty oeni R e eee E E aa 31 7 3 Repair and Servicers aeee ign ee og as eit REE E 32 Certification Statements nrinn nanasi niee i nes e ne aiai a 33 9 0 Appendices A Program Menu Call In Menu and Alarm Menu Flow Charts ee 35 B Remote Switch Wiring Diagrams amp Installation Notes
25. Manual Remote Switch T1 T2 By pressing and holding this switch you can manually switch between the T1 and T2 settings for the Remote Switch Front of the FA D2 Deluxe FA D2 Standby On FreezeAlarm oe Power Alarm Indicator Light Indicator Light 5 T1 T2 Program Phone Indicator Light Indicator Light Jack 1 3 What you need before you start Before proceeding make sure you have the following ready 1 2 9 volt Lithium battery for back up power A high quality surge suppressor that protects the power line as well as the telephone connections These are available from all hardware stores department stores and directly from Control Products Up to three phone numbers that the FreezeAlarm will automatically call during a temperature power or battery emergency You may program only one number or program the same telephone number in more than one of the three positions These phone numbers are referred to as call to telephone numbers throughout this manual Access to a single line telephone jack An existing single telephone line in a home or business will work fine and the FreezeAlarm will not interfere with the use of your telephone line in any way The FreezeAlarm will operate with all standard telephone systems that accept either pulse or tone dialing Certain private telephone systems and PBX or digital telephone systems may not work with the FreezeAlarm In those cases a dedicated
26. NTROL PRODUCTS OQ Appendix B Using the Remote Switch to Switch Between Two Thermostats set at Different Temperatures PRE HEAT DIAGRAM Rear View al Right Side of FA D2 This diagram shows a siniple wiring diagrani for a aingle zone heating sysiem wame LOW YOLTAGE or MILLIYOLT thermostats ONLY Please contacl Cuslomer service or visit our wel site for wiring dingrams detailing multi sone and eleciric heating Applications This is your furnace boiler or healing system The comro pawel on this device may alur Gomiiral your cenil aif 2onditeorer and thus allow you bo coal down v ar home or turn om the mira conditioning remately p Thi a your We thereat T2 i a ee pe ASTD io mainie whi Fee PRT ae ro eau peed This 6 ur au mei MA Pearce TT ahenk be ait fo Lhe barpa miu ee oe Bite 1S Ba aA poi er Frami the relay comad i Fitt Alari you can direct this krw voliage power ta either your main thermostat T 1 or toa brad new thermostat TZ T1 should be your eomle th SIAL eet al a temperature you wish the premises to be whea you amive T3 should be your rany Hermosa set a temperaiure while you re away When you are mod at the rere homie TI wall coniral ihe furmmace and meiimen the away femperiture When you want to VIRE hat ea Hiri ply call up and rouhe the power to TI Ti will dell ihe furnace or mr conditioner to start working to g tg your eamh etigen ihai supplies bow
27. There are no alarm conditions occurring at this time To access the main menu enter your four digit security code followed by the pound key 3 You can either hang up or go into the main menu by entering your four digit security code Remotely Changing the Remote Switch Status The Remote Switch Status is a feature that is most often used to switch between one thermostat set at a low temperature to one set at a high temperature thereby allowing you to remotely turn up or down the temperature in your remote home or cabin The remote switch can also be used to turn on or off another device Details on how to hook up devices to the T1 T2 COM connections on the back of the FreezeAlarm are detailed beginning on Page 39 To change the Remote Switch Status 1 Access the MAIN MENU as described above You will hear the following You are now in the main menu For current status press 1 For remote switch status press 2 To enter programming menu press 3 2 Select Menu Option 2 and you will hear The position of the remote switch is currently T1 or T2 To change press O or to return to the main menu press 9 3 Toggle between the T1 T2 switch as desired 20 3 3 NOTE The Remote Switch Status can only be changed by authorized personnel who have correctly entered a security code The switch can also be changed while at the monitored location simply by pressing and holding in the Remote Switch button on the back of the FreezeAla
28. ack up battery power until the power is restored It is conceivable therefore that the battery could drop below 7 0 volts and begin calling out again but this time with a battery alarm You would need to cancel this alarm call separately from the earlier power out alarm If power continues to be out you could also receive a separate temperature alarm later because your heating system will most likely not be working This alarm call out would have to be canceled separately as well Example 2 Assume you have received a power out alarm and have canceled the alarm call out A short time later you receive another power out alarm What has happened is that your power was restored after you canceled the first alarm call out and the power out alarm was automatically reset A short time later the power went out again not infrequent in remote areas This caused the FreezeAlarm to initiate another power out alarm and begin calling your call to phone numbers again Example 3 This same multiple alarm call out can happen with a temperature alarm as well especially if the temperature outside your monitored location is close to the temperature alarm setpoint you have programmed on your FreezeAlarm If your heating system fails or power is out the temperature in your monitored location begins to drop In the evening when it is colder outside it may drop below your temperature alarm setpoint inside the home and then call you with a temperature alarm Th
29. articular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that which the receiver is connected Consult the dealer or an experienced radio television technician for help Canada s Industry Standard Notice The Canadian Industry Standard label identifies certified equipment This certification means the equipment meets certain telecommunications network protective operational and safety requirements The Department does not guarantee the equipment will operate to the user s satisfaction Before installing this equipment users should ensure that it is permissible to be connected to the facilities of the local telecommunications company The equipment must also be installed using an acceptable method of connection In some cases where the company s inside wiring is associated with a single line individual service may be extended by means of a certified connector assembly telephone extension cord The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations Repairs to certified eq
30. at one of your other call to people has canceled the alarm call out and the alarm conditions have improved at your monitored location If that has occurred you will not hear any alarm conditions but instead you will be given a current status and then an opportunity to enter the main menu Replacing the Back Up Battery When the battery requires replacing we highly recommend replacing it with a new 9 volt lithium battery Follow this procedure to change the back up battery 1 Switch the front toggle switch to the STANDBY position 2 Remove the old battery and insert the new battery 3 Switch the front toggle switch back to the ON position A fresh 9V lithium battery will provide approximately 10 to 15 hours of power to the FreezeAlarm if it is calling out every 15 minutes to all three phone numbers If it is calling to fewer numbers calling out every 2 hours or the alarm call out was cancelled during one of the first calls the battery life should be longer Too many variables exist to provide accurate battery life for every condition There are other battery and power supply discussed in section 4 4 on Page 27 Disconnecting the FreezeAlarm for Seasonal Storage Your FreezeAlarm can provide year round protection but if desired it can be safely stored for seasonal use To store your FreezeAlarm disconnect all cables and wires and take out the battery If you leave a battery in your FreezeAlarm the battery will be dead the next time y
31. cal fumes or corrosive vapors Never install or connect your FreezeAlarm during a lightning storm 1 2 Knowing your way around your FreezeAlarm Back of the FA D2 9V BATTERY WALLJACK SENSOR rier y c F INPUTS 1 M 2 12VDC REMOTE PWR SWITCH OKO te pony 00 YT ol D a a ae a Phone Dip Sensor Input 9 volt battery Auxiliary Remote Plug In Manual Jack Switches Jack connection Alarm Switch Power Cord Remote Inputs Connections Switch Phone Jack Plug in the supplied telephone cord here The other end plugs into your telephone wall jack or through a surge suppressor that has the ability to protect the phone line See the connections section later in the manual for more details Standby On Switch Toggle switch for either STANDBY mode or ON for normal operation mode Dip Switches There are six dip switches that are used to select various features and functions of your FreezeAlarm Note that the UP position of the switch is towards the top of the FreezeAlarm s case and DOWN is towards the bottom Power Indicator Light This light is on if the plug in transformer is plugged in and there is power to the unit It is not on if the unit is operating on battery power only Sensor Input Jack Use this to plug in the temperature sensor This jack is a slightly smaller than a normal phone jack This is done to prevent accidental input of the phone l
32. curity Incorrect code Security code Incorrect security incorrect securit code good bye a rde A it earlier One or more alarms present Call in menu for FA D2 NOTE If there is a personal greeting message recorded the Freeze Alarm would answer as follows Personal message P The current temperature is xx degrees In addition for call in we re not going to give the aux alarm status It is stated later if it is in alarm mode No need to state There is an alarm condition at your remote monitored location the following alarms currently exist or have occurred recently There is a temperature alarm The power has been out for XXXX minutes and is currently ON OFF There is a battery alarm The auxiliary input is in alarm mode Or play the user s recorded auxiliary alarm message here instead Please check conditions at your monitored location NOTE Only play the alarms which are currently in fault _f gt For the auxiliary alarm we will play the custom recorded message instead of The auxiliary immediately input is in alarm mode Alarm call out has Alarm call out been canceled is active t y To access the main menu enter your four digit security To cancel the alarm call out enter your four digit security code followed by the pound code followed by the pound key key Incorrect Sec
33. ded that you write your purchase date and the date code of the unit in the spaces below The date code can be found on the bottom instruction label on the FreezeAlarm unit itself You will also need a four digit security code This is used to prevent unauthorized remote access to your FreezeAlarm The factory default security code is 9999 You may keep this or change it to your unique code Your security code must contain four numeric digits Purchase Date Date Code Security Code Technical Support Monday Friday 8am to 5pm Central Time Phone 952 361 4101 Fax 952 361 9420 Email techsupport controlproductsinc com Web www controlproductsonline com Every effort has been made to ensure the information in this user manual is complete accurate and up to date Control Products Inc assumes no responsibility for results of errors in this manual nor can it guarantee that changes in equipment made by other manufacturers and referred to in this manual will not affect the operation or intended use of the FreezeAlarm FreezeAlarms are made in the United States by Control Products Inc Copyright 2005 by Control Products Inc Document 42420024A Revision A 1105 FreezeAlarm WaterAlarm and MiniAlarm are trademarks of Control Products Inc Touch Tone is a registered trademark of AT amp T This manual may not be reproduced modified or distributed without permission from Control Products Inc 2 TABLE OF
34. dition you will also have the opportunity to program a pager display message To program a star in your phone number press the key on your keypad as part of the phone number To enter a two second pause in a call to phone number press the star key twice This will count as two digits of your total 60 allowed for that number You can combine keys in a phone number to add both a two second pause and a dialed star by having three stars in your phone number sequence Three stars equal a 2 second pause followed by a dialed star Four stars equal a four second pause in the dialing sequence IMPORTANT NOTES ABOUT ENTERING YOUR CALL TO TELEPHONE NUMBERS e LONG DISTANCE Make sure you enter the phone number exactly like you would dial a voice call Use a 1 and or area code if needed If dialing internationally make sure you have the correct country codes and follow proper international dialing rules Check with your phone company for assistance determining the correct number e AREA CODES Area codes are often changing and the rules for dialing within an area code also change frequently Make sure you change your call to phone numbers if area codes or calling rules change in your area e TEST YOUR FREEZEALARM It is critical that you test your FreezeAlarm by following the test procedure on page 18 All phone numbers should be tested to ensure they are programmed correctly and that the FreezeAlarm works properly with your phone line
35. en during the day the temperature may return above the temperature alarm setpoint because the sun is out This would cause the FreezeAlarm to potentially reset during the day and call you again at night at 2am of course How to Cancel the Alarm Call Out and reset your FreezeAlarm Two things need to happen to reset the FreezeAlarm The alarm call out must be canceled and the alarm condition needs to be corrected Once both of these things have happened the FreezeAlarm will automatically reset 23 You can cancel the alarm call out in one of three methods 1 If you answer a call from the FreezeAlarm the FreezeAlarm will give you an opportunity to enter the four digit security code which will cancel the alarm call out 2 If the FreezeAlarm has left alarm messages on your answering machine or voice mail you can remotely call into the FreezeAlarm and cancel the alarm call out by following the prompts 3 Go to the monitored location and if the FreezeAlarm is still dialing out to the call to phone numbers you can simply switch the front toggle switch to STANDBY mode and then back again to the ON position This is a physical reset that can only be done at the monitored location You will see the red ALARM light go off when you reset the FreezeAlarm in this fashion Doing this does not erase any programmed phone numbers security codes or other settings Those settings will be retained indefinitely even if the power cord is unplugged a
36. erflowing sumps The WaterAlarm triggers the Deluxe FreezeAlarm to call your three programmed numbers and warn you of a water emergency e Home Security can be added through the addition of our MiniAlarm Motion Sensor MA S01 An audible alarm will warn intruders to stay away and trigger the Deluxe FreezeAlarm to call and warn you of an intrusion at your property e A normally open or closed auxiliary alarm contact allows you to monitor for any type of alarm sensor that can either close or open a dry contact e Any or all of the three numbers can be to a numeric pager APPLICATIONS e Second home owners or Snowbirds who need to monitor two different homes e Cabin and Vacation Property Owners can monitor their home and pre heat it by phone e Monitor a refrigerator or freezer from getting too warm since the Deluxe model has both a high and low temperature alarm setpoint e Computer Rooms can be monitored if air conditioning fails e Elderly residents or pets can be rescued from homes that get too hot e Monitor greenhouses health care drugs vaccines and supplies e Monitor equipment boilers and any machinery that has the ability to close an alarm contact If after reading this manual you need additional help installing or using your FreezeAlarm contact our technical support department at 952 361 4101 Monday through Friday 8am to 5pm Central Time For easy future reference during technical support and service it is recommen
37. ering machine or voice mail If you have your FreezeAlarm set to answer on a high number of rings you may need to place more calls to get the FreezeAlarm to eventually answer Note that after three and a half minutes the FreezeAlarm s incoming ring counter will reset to zero If you receive many incoming calls to your monitored location like at a business you would want to set your incoming ring counter to a high number NOTE If you have a high incoming ring count selected you need to place a number of calls in a short period of time three and a half minutes to access your FreezeAlarm remotely What Happens During An Alarm The FreezeAlarm will call your programmed call to telephone numbers if an alarm condition has occurred It will continue to call you every 15 minutes or every two hours depending upon dip switch 3 s position even if the alarm condition has been corrected but the alarm call out has not yet been canceled Note that canceling the alarm call out does not disable the FreezeAlarm The FreezeAlarm will continue to monitor all conditions including those in alarm Alarm Call Out Sequence The FreezeAlarm will continue to call all programmed call to phone numbers until someone acknowledges the alarm and cancels the alarm call out The FreezeAlarm will call the first call to telephone number and play its alarm message to a person answering machine or voice mail If it gets a busy signal no answer or a person who doesn
38. ezeAlarm is currently set to alarm if the power is out for xx minutes To change press 0 or press 9 to return to the main menu y press 1 To review or record Main Alarm Message press 2 To review or record Auxiliary Alarm Message press 3 To return to the main menu press 9 To review or record Greeting Message 4 2 3 p lt _ 0 gt _ Enter the number of minutes the power _ _ should be out before calling with a power alarm followed by the pound key is currently play The Greeting Main Alarm Auxiliary Alarm Message record a new message press O i or to return to the message menu press 9 Record your message _0 gt _ after the tone when you are done press the pound key message To gt The auxiliary alarm input is currently set as a normally open closed contact To change press 0 or press 9 to return to the main menu Pressing zero will play back 0 the same menu but with the selection changed 35 Hello this is your Automated Monitoring Control System The current temperature is xx degrees the power is on off and the battery is at x xx volts No Alarms Present There are no alarm conditions occurring at this time To access the main menu enter your four digit security code followed by the pound key Correct se
39. ezeAlarm remotely A CRITICAL TEST YOUR FREEZEALARM to make sure it calls your call to telephone numbers during an alarm See the Test Procedure detailed below 2 5 Testing Your FreezeAlarm It is CRITICAL that you test your FreezeAlarm to ensure you have programmed all the telephone numbers correctly and to make sure the FreezeAlarm is working properly with your telephone line Before you start the test make sure the front toggle switch is in the ON position To test an alarm call out based on a cold temperature wrap the end of the temperature sensor in a plastic bag and insert into a cup of ice or put the sensor in a freezer ITIS VERY IMPORTANT THAT THE TEMPERAUTRE SENSOR DOES NOT GET WET The sensor is not designed for wet environments or for submersion into any liquids Note that if you have the 45 minute temperature alarm delay on it will take 45 minutes or more before the alarm call out begins The temperature alarm delay feature can be changed based on the position of dip switch 5 See the dip switch table on page 7 You can also test the alarm call out simply by unplugging the temperature sensor With the sensor unplugged the unit automatically thinks there is a temperature alarm and it will begin calling the three programmed phone numbers NOTE When you first power up your FreezeAlarm with either the battery or the plug in transformer the unit waits for five minutes before checking any sensors After you have verified
40. for either a contact closure default position or for a contact opening When the Auxiliary Alarm Input is either closed or opened depending upon the setup it will trigger the FreezeAlarm to begin calling your preprogrammed telephone numbers and play a special message you can record for whatever alarm device is connected to the auxiliary alarm input For instance if you have our WaterAlarm connected you can record an alarm message that will play warning you of a water emergency at your monitored location instead of the factory default Auxiliary Alarm message Using the Remote Switch Feature T1 T2 and COM connections The Remote Switch allows you to remotely turn on or off another device by telephone or remotely switch between two different thermostats to pre heat or cool your monitored location This installation is detailed in Appendix B 2 0 PROGRAMMING 2 1 You can program your FreezeAlarm using a regular home telephone or you can remotely access your FreezeAlarm and program it using a cell phone or a phone at another location This feature allows you to remotely change programming selections at a later time from any phone in the world Most first time users program their FreezeAlarm locally or at the location where the FreezeAlarm is located by using a single line home telephone A cordless phone may work but a standard single line home telephone with a wired handset will work best An explanation of each menu option with he
41. g calls to go to the user s answering machine or voice mail service prior to the FreezeAlarm answering The FreezeAlarm will answer based on your incoming ring count selection programmed during the programming section The factory default incoming ring count is five rings How This Works an example 1 During Programming you set your FreezeAlarm to answer on a specified number of incoming rings You set up your answering machine or voice mail to answer on a number of rings less than what you have selected for your FreezeAlarm to answer on For example if your FreezeAlarm is set to answer on 5 rings set your answering system to answer on four rings or less 2 When your monitored location receives an incoming call it will go to the answering system first because that is set to answer on four or fewer rings while your FreezeAlarm is set to answer on five rings 21 3 4 3 If you wish to call your FreezeAlarm place two calls to your monitored location a On the first call let the phone ring two or three times and then hang up before your answering system answers The FreezeAlarm will remember those first two or three rings in memory for the next three and a half minutes b On your second call let the phone ring another two or three times Your FreezeAlarm will answer first because it remembered the first two or three rings and with the second set of rings it accumulated a total of five rings and now answers before your answ
42. h this menu option you can select to have the FreezeAlarm answer after a specific number of rings have been counted by the FreezeAlarm The factory default incoming ring count is set at five rings You can set the ring count from 1 to 30 rings This feature is provided for several reasons 1 If you have an answering machine or voice mail at the monitored location you generally want people calling that location to be able to leave a message If the FreezeAlarm answers before your message system answers it will override the answering machine or voice mail You can program the FreezeAlarm to answer on a number of rings that is greater than that of your message system and still have people leave messages for you To gain access to your FreezeAlarm instead of the message system follow the procedures outlined in Use of Answering Machines or Voice Mail at the Monitored Location on page 21 2 When you are visiting your monitored location you may receive frequent phone calls from outside callers With a smaller incoming ring count selected there is the possibility the FreezeAlarm could answer if several callers called in sequence within a three and a half minute period of time If you normally receive a lot of calls at the monitored location you may wish to set the incoming ring count to a higher number This is helpful for businesses who receive a lot of calls or for vacation rental companies that are monitoring multiple locations and don t want the
43. hen hear There are no alarm conditions occurring at this time To access the main menu enter your four digit security code followed by the pound key If alarm conditions do exist when you call into your FreezeAlarm the FreezeAlarm will play any alarm conditions present at that time instead of the above message See the section What Happens During An Alarm on page 22 for more details on what to do if this message is playing You can still continue to remotely program the unit even if alarm conditions are present 5 Enter your four digit security code followed by on your telephone key pad If the security code is correct the main menu will play If the security code is incorrect you will be given one more chance and then the FreezeAlarm will say Incorrect Security Code good bye and then hang up 6 From the Main Menu select menu option 3 to enter the Program Menu From the program menu you can review or program your call to telephone numbers security code temperature alarm setpoints and other options There are six programming options in the Programming Menu Each Menu Option is discussed in detail in section 2 2 7 IMPORTANT Flip the front ON STANDBY switch to the ON position for normal operation of your FreezeAlarm A IMPORTANT WARNING After Programming you must return the front toggle switch to the ON position or the FreezeAlarm will not call you if an alarm condition occurs and you will be unable to call into your Fre
44. ine into this jack which could cause harm to the FreezeAlarm Alarm Indicator Light This light will FLASH if the unit is in the STANDBY mode During normal operation with no alarms present this light will not be on This light will remain ON and not flash if the unit is in ALARM mode meaning one of the alarm conditions exists or the alarm call out has not been canceled 9 Volt Battery Connection This is where you will plug in your 9 volt lithium battery Auxiliary Alarm Inputs The Auxiliary Alarm Input allows you to monitor any additional alarm device or contact closure or contact opening This is where you could hook up our WaterAlarm or MiniAlarm Motion Sensor T1 and T2 Indicator Lights These indicate the position that the remote switch is in They can be ignored unless you are using the T1 T2 Remote Switch to either turn up or down the temperature in your monitored location or to turn on or off some other device by telephone Remote Switch Connections These are the connections for the Deluxe FreezeAlarm s Remote Switch Relay Program Phone Jack Plug in a phone here to either locally program your FreezeAlarm or to locally check status or cancel alarm call outs For normal operation you will not leave a phone plugged into this jack Plug In Power Cord Connection This is where you will plug in the power cord transformer that is included with your FreezeAlarm
45. ir guests to even know there is a FreezeAlarm in their rental property MENU OPTION 5 Review or Program the Number of Minutes the Power Should be Out Before Calling with a Power Alarm The FreezeAlarm has the ability to call you if the power to the FreezeAlarm has failed Through this menu option you can select the number of minutes that the power should be out before it calls you with a power out alarm You can select any number of minutes from 1 to 120 The power will have to be out continuously for the number of minutes selected before calling you For example if you have the power out timer set at 60 minutes and the power goes out for 40 minutes and then comes back on for a brief moment and then goes off again the timer resets to zero The FreezeAlarm will keep track of the number of 14 minutes the power is out and tell you during an alarm call how long the power has been out and if the power is currently on or off The factory default for the power out timer is 60 minutes The power monitoring feature can be turned off so that you never receive calls about power failures This is done by flipping dip switch 2 to the UP position on the back of the Deluxe FreezeAlarm See Dip Switch explanations on Page 7 MENU OPTION 6 To Review or Record Messages You can record several messages on the Deluxe FreezeAlarm Each message can be approximately 15 seconds long The following explains how the messages work Greeting Message This i
46. is time however you will likely receive a Battery Alarm call from your FreezeAlarm meaning the battery has gone below 7 0 volts Once the battery drops to about 6 0 volts the FreezeAlarm can no longer operate 27 If you wish to have a longer battery option consider connecting 6 D cell alkaline batteries together in series This produces the required 9 volts of DC power and also provides about 7 to 10 days of power from fully charged batteries In addition the FreezeAlarm can accept up to 12 volts of DC power through the battery connection Because of this you could connect a 12 VDC battery to the battery terminals on the FreezeAlarm and have a much longer battery life than even the D cell battery option described above Control Products has not tested this option nor have we determined the operational life when the FreezeAlarm is running off this battery option For more information on this application contact Technical Support Control Products offers some other battery options Please call Customer Service or visit our web site at www controlproductsonline com for accessories 5 0 COMMONLY ASKED QUESTIONS I have pulse dialing on my phone line Can I use the FreezeAlarm Yes There is a pulse tone dip switch on the back of your FreezeAlarm Put this switch in the UP position to dial out in pulse dialing mode If you are programming the FreezeAlarm locally using a phone plugged into the front of the FreezeAlarm you
47. l use a FreezeAlarm on that phone line 28 5 6 How do I reset my FreezeAlarm 6 7 6 0 TROUBLESHOOTING ce I did a test and my FreezeAlarm is not calling out to the programmed phone numbers 1 The FreezeAlarm is not responding when I press the keys on my touch tone phone In most cases you can use these types of phone lines but you should utilize appropriate telephone filters as specified by your DSL or Cable Phone Service Provider Be advised that these phone lines are not regulated the same way a regular telephone line is and may interpret the Touch Tones differently than that of a regular POTS telephone line More important is that DSL and cable provided phone service from your telephone company may require that the power is on in the monitored premises A regular 5 telephone line gets its power from the telephone company and will often operate even if the regular power is out in the premises This means that if you have one of these phone services your FreezeAlarm WILL NOT CALL OUT IF THE POWER IS OUT If I unplug the FreezeAlarm or take out the battery will I have to re program all my telephone numbers and settings No The FreezeAlarm uses a special memory that retains all of your programmed call to phone numbers and settings indefinitely The FreezeAlarm automatically resets itself when the alarm call out has been canceled and the alarm conditions have been corrected My temperature sensor is damaged
48. ll you if an alarm condition occurs and you will be unable to call into your FreezeAlarm remotely CRITICAL TEST YOUR FREEZEALARM to make sure it calls your call to telephone numbers during an alarm See the Test Procedure detailed on page 18 2 4 Programming Your FreezeAlarm Remotely By calling into your FreezeAlarm from a remote phone or cell phone Make sure all the connections have been made according to section 1 5 on page 8 You will not need to plug a phone into the PROGRAM PHONE jack on the front of the FreezeAlarm to program the FreezeAlarm remotely Make sure the toggle switch on the front of the FreezeAlarm is in the ON position From an outside phone or a mobile cell phone call the telephone number of your monitored location The FreezeAlarm will answer after five rings have been heard by the FreezeAlarm If you have an answering machine or voice mail at the monitored location you may need to place two or more calls to 17 the monitored location to circumvent the answering machine or voice mail For more details on this topic see the section about Answering Machines and Voice Mail on page 21 4 When the FreezeAlarm answers you will hear the following Hello this is your automated monitoring system or a custom greeting message if recorded earlier The current temperature is XX degrees the power is on or off and the battery is at X XX volts If no alarm conditions are present at the current time you will t
49. lpful hints on programming is provided after the quick programming guide Quick Program If you feel comfortable with the various menu options and want to get your FreezeAlarm up and running quickly follow the steps below This provides a quick method to program up to three call to phone numbers into your FreezeAlarm in just a few minutes You should program at least one call to 10 telephone number into your FreezeAlarm for proper operation Check the factory defaults if you need to change any other settings as they are not discussed in this Quick Program section When the manual tells you to press a number it is referring to a number on your program telephone s Touch Tone keypad If you need an explanation of each menu option please go to the next section on the following page 1 Make sure the dip switches on the back of the FreezeAlarm are set properly for your application See the dip switch table earlier in this manual for switch explanations 2 Make sure your FreezeAlarm is connected properly and has a 9 volt lithium battery installed 3 Check to be sure the toggle switch on the front of the FreezeAlarm is set to STANDBY position The front ALARM light will blink while in STANDBY mode 4 Plug a program phone into the PROGRAM PHONE jack on the front of the FreezeAlarm 5 Pick up the telephone handset and the Main Menu will begin to play 6 Press 3 to access the Program Menu 7 Press 1 to review or program phone number
50. m Input Setting cccccccsscesseesseeseeeseeeeceeeeseeseenseeeaes Normally Open A IMPORTANT WARNING After Programming you must return the front toggle switch to the ON position or the FreezeAlarm will not call you if an alarm condition occurs and you will be unable to call into your FreezeAlarm remotely CRITICAL TEST YOUR FREEZEALARM to make sure it calls your call to telephone numbers during an alarm See the Test Procedure detailed on page 18 2 2 Explanation of Program Menu Options Each of the programming options is explained in detail below Review this before proceeding to program your FreezeAlarm MENU OPTION 1 Review or Program Telephone Numbers Program your call to phone numbers here You can also review or change any existing phone numbers here if needed as well The Deluxe FreezeAlarm can dial up to three phone numbers with each phone number consisting of up to 60 digits You can include pauses and the star key as part of your phone number to accommodate calling cards different phone features and pager systems Any or all of these numbers can be to a mobile phone or any other telephone number These phone numbers are referred to throughout the rest of this manual as call to phone numbers One or more of the phone numbers may be a pager phone number If so you will have the opportunity during the program sequence to identify which numbers are pager numbers and which are regular telephone numbers In ad
51. n please contact Control Products at 952 361 4101 Other contact numbers and information can be found at the end of this instruction manual If the equipment is causing harm to the telephone network the telephone company may request that you disconnect the equipment until the problem is resolved The FreezeAlarm should be repaired only by Control Products or an authorized service representative Contact Control Products for the nearest authorized service representative Connection to party line service is subject to state tariffs Contact the state public utility commission public service commission or corporation commission for information If your home has specially wired alarm equipment connected to the telephone line ensure the installation of your FreezeAlarm does not disable your alarm equipment If you have questions about what will disable alarm equipment consult your telephone company or a qualified installer 33 FCC PART 15 This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a p
52. nd the battery is removed Canceling the Alarm Call Out during a call from the FreezeAlarm When the FreezeAlarm calls you you will initially hear either the factory recorded alarm message or your custom alarm message that you recorded during the programming section Hello this is your Automated Monitoring System Or you will hear your custom alarm message that was recorded earlier There is an alarm condition at your remote monitored location The following alarms currently exist or have occurred recently at location XXXX This will be followed by one or more alarm conditions A four digit location code will also be played This is the same number as your security code There is a temperature alarm The power at location has been out for minutes and is currently on or off There is a battery alarm at location The auxiliary alarm input is in alarm mode or your custom recorded auxiliary alarm message will play here instead Please check conditions at your monitored location immediately This entire message will repeat again and be followed by To cancel the alarm call out enter your four digit security code followed by the pound key You will be given two chances to enter the correct security code If incorrect two times the FreezeAlarm will say Incorrect Security Code good bye and 24 then it will hang up If you enter the correct security code the FreezeAlarm will respond with The ala
53. oper connection of the phone lines See the diagram below for details on the phone line connections and follow the instructions that came with your surge suppressor 9V BATTERY WALLJACK SENSOR ALARM ToT 2 CA p e0 ece 2VDC REMOTE PWR SWITCH TATZ 5 Plug in your standard single line telephone to the PROGRAM PHONE jack on the front of your FreezeAlarm See Figure below NOTE This phone will only be used to program your FreezeAlarm locally or for locally checking current status of your FreezeAlarm Itis important to UNPLUG this phone from the front after you are done programming or making any changes 1 7 Connecting Additional Alarm Devices to the Auxiliary Alarm Input This is most often used to connect our WaterA larm MiniAlarm motion sensor or one of our auxiliary temperature alarms Any sensor or alarm device that opens or closes a dry non voltage contact can be connected to the auxiliary alarm input Connection of more than one alarm device to the auxiliary alarm input is possible by connecting them in parallel as noted below The auxiliary alarm input cannot accept any device that sends voltage through the contact wire 1 8 per OG TT d Flug the comiat alarm awpui to the Amilia Alam Input as hoen in da the degra Erem rre meae EI a During programming you can set the Auxiliary Alarm Input to monitor
54. ou are ready to use your FreezeAlarm Storing electrical devices with batteries in place is not recommended Store your FreezeAlarm in a dry place with no excessive temperatures The FreezeAlarm will indefinitely retain all programmed call to phone numbers and other programmed settings even if the power cord is disconnected and the battery has been removed It is recommended you check all settings when reconnecting your FreezeAlarm to double check call out phone numbers and 26 verify all settings are still correct It is critical that you TEST your FreezeAlarm once each year 4 0 OTHER INSTALLATION NOTES 4 1 4 2 4 3 4 4 Answering Machines at the Call To Locations If you have an answering machine or voice mail at any of the call to locations the FreezeAlarm will generally leave a portion of its alarm message on the answering machine or voice mail You may want to test this as some answering systems do not pick up the message Answering machines and voice mail will not affect or stop the call out sequence in any way Extending the Temperature Sensor Length The temperature sensor may be extended using standard four conductor telephone extension wire up to 100 feet 30 5m from the FreezeAlarm unit Extending the sensor more than 100 feet will increase the temperature that the FreezeAlarm senses by about 1 F C for every 100 feet added In other words an extension of 600 feet would give you a temperature that is approximately
55. panies may still charge for an attempted long distance call which does not go through 45 Minute Temperature Alarm Delay This us DOWN The temperature FreezeAlarm feature provides a 45 minute delay before going tbe on oi will call into temperature alarm This is used frequently 5 to monitor walk in refrigerators or freezers for a TADE Pox immediately rise in temperature The 45 minute temperature minutes before when the alarm delay can be enabled so it won t alarm going into alarm temperature while the refrigerator or freezer is being loaded mode i pets otor calling out range Fahrenheit Celsius Selection The FreezeAlarm 6 can report temperatures in either degrees UP C DOWN F 1 6 Connecting Cords Sensor and Battery Connect the temperature sensor to the place on the back of the FreezeAlarm 1 2 marked Sensor Connect the plug in power transformer to the Power connection on the back of the unit Plug the other end into an AC power outlet or into your surge suppressor power strip purchased separately Plug in a 9 volt Lithium battery to the battery connection 4 Using the telephone cord supplied with the FreezeAlarm connect one end to the OUT TO WALLJACK connection on the back of the FreezeAlarm and the other end into your telephone jack on the wall If you are using a surge suppressor that also protects the telephone line there should be an IN and OUT labeling or diagram for pr
56. r telephone must be set to tone because the FreezeAlarm s menu structure requires touch tones to operate Once you have completed the programming functions you can reset your phone back to pulse mode I have to dial 9 before I can make a phone call Can I do this Generally the FreezeAlarm should be able to dial 9 or any other sequence of numbers during a phone call If you need to dial a number to get an outside line or a dial tone it is recommended you program in a 9 followed by a pause This will allow the phone system time to get the dial tone before the FreezeAlarm begins playing the rest of the digits of your call to phone number Do I need a dedicated phone line for my FreezeAlarm No The FreezeAlarm uses any existing telephone line The only time it uses the line is if it needs to call out or if you are calling into the FreezeAlarm If you have a commercial phone system at the monitored location the FreezeAlarm may work but it needs to be tested An easy way to know if your phone system will work is to take a regular single line telephone and plug it into the telephone jack If you get a dial tone when you pick up the handset your FreezeAlarm should work as well Unfortunately there are hundreds of different phone systems and phone companies in the United States and Canada and we cannot guarantee that we will work with all of them I have high speed internet access and telephone service through my cable or phone company Can I stil
57. rity code may be incorrect Are you hearing the exact same alarm message each time even after you have canceled the alarm call out If not then the FreezeAlarm is calling with different alarms each time See the Multiple Alarms section on page 24 I am receiving false temperature or power alarms The FreezeAlarm s temperature sensor is accurate to within 3 F of the actual temperature Your sensor may be too close to a cold window or other colder spot at the monitored location You may also have the temperature on your thermostat set too close to the temperature alarm setpoint on your FreezeAlarm Either change the thermostat setting or your temperature alarm setpoint so there is a 5 degree difference in temperature False power alarms are most likely the result of the power going off and then back on before you ve had the chance to cancel the alarm call out I am receiving false Auxiliary alarms In some environments the auxiliary alarm input can be sensitive to high voltage power lines radiation or microwave transmissions and accidentally trip the auxiliary alarm even if you don t have anything plugged into it If this happens move the unit to a new location with less interference or shield the unit and its temperature sensor so as to avoid or minimize the interference All the lights are off on my FreezeAlarm If the power is out or the power cord is unplugged the lights on the FreezeAlarm will not be illuminated This is designed
58. rm This will toggle between the T1 and T2 relay positions To Remotely Change any Program Menu Settings Including Call To Phone Numbers 1 Call the telephone number of your monitored location where the FreezeAlarm is located 2 When the FreezeAlarm answers you will hear the factory greeting message or your custom greeting message recorded earlier This will be followed by the current temperature power status and battery voltage at your monitored location Enter your four digit security code followed by to access the main menu Press 2 to access the Program Menu Press the number of the menu option you wish to change and follow the prompts See menu option explanations starting on page 12 or refer to the menu flow charts in the Appendix dy Use of an Answering Machine or Voice Mail at the Monitored Location If you have an answering machine or voice mail at the monitored location where your FreezeAlarm is located there is an easy way to still use your answering machine or voice mail and access the FreezeAlarm to check current status or to cancel the alarm call out The FreezeAlarm will answer after it hears a specified number of rings This number of rings is the incoming ring count selection programmed during the programming section The FreezeAlarm can count incoming rings over multiple calls to the FreezeAlarm The multiple calls must be made within three and a half minutes of the first call This allows most incomin
59. rm call out is now canceled To return to the main menu press 1 Otherwise hang up Calling into your FreezeAlarm to Cancel the Alarm Call Out If you received calls from your FreezeAlarm and know there is an alarm at your monitored location you can call into your FreezeAlarm from any phone in the world and remotely cancel the alarm call out without having to wait for another call from your FreezeAlarm If you have an answering machine or voice mail at the monitored location read the section Use of an Answering Machine or Voice Mail at the Monitored Location on page 21 before proceeding Follow this procedure 1 Call your monitored location s phone number where the FreezeAlarm is located 2 When the FreezeAlarm answers you will hear the following Hello this is your Automated Monitoring System Or you will hear your custom alarm message that was recorded earlier The current temperature is degrees the power is on or off and the battery is at volts There is an alarm condition at your remote monitored location The following alarms currently exist or have occurred recently at location This will be followed by one or more alarm conditions A four digit location code will also be played This is the same number as your security code There is a temperature alarm at location The power at location has been out for minutes and is currently on or off There is a battery alarm at location
60. s 8 Press 1 to review or program phone number 9 Press 0 to enter a new phone number or to change an existing number 10 Enter the telephone number followed by the pound key 11 Press 2 to identify this as a regular phone number and not a pager 12 Press 9 to return to the Phone Number Menu 13 Repeat this process for phone numbers 2 and 3 14 When done entering phone numbers press 9 to return to the Program Menu 15 Hang up or change any of the other settings as needed 16 After programming is completed UNPLUG YOUR PROGRAM PHONE from the front PROGRAM JACK 17 FLIP THE TOGGLE SWITCH ON THE FRONT TO THE ON POSITION If this is the first time you have programmed this FreezeAlarm the factory default settings for the other menu options are as follows Security CODE ies sas tliat eee cain ace T a S EA dct 9999 Low Temperature Alarm Setpoint cccccsccsseeeeeeees 45 Fahrenheit or Celsius High Temperature Alarm Setpoint nossos 100 Fahrenheit or Celsius Number of rings before the unit answers ccssccscsecssecsseeecneeescnseneenecnseeeeeaees 5 rings Number of minutes the power should be out before Alarming ccsceeceeeeeees 60 Greeting Message Hello this is your automated monitoring control system Alarm Message Hello this is your automated monitoring control system Auxiliary Alarm Message 0 The auxiliary alarm input is in alarm mode Auxiliary Alar
61. s Product or its failure to operate in the manner in which it is designed The Warrantors liability if any shall be limited to the original cost of the Product only Use of this product is at your own risk Repair and Service In the event that the Product does not conform to this Warranty the Product should be shipped or delivered freight prepaid to Warrantor with evidence of original purchase If in any way you re not comfortable with this product or its Limited Warranty we encourage you to return it unused within 30 days of original purchase date with evidence of the purchase date The FreezeAlarm should only be repaired by Control Products or an authorized service representative Do not attempt to repair or fix your FreezeAlarm or have it serviced by anyone other than an authorized service representative or you will void your warranty To return a product to Control Products All products being returned to Control Products Inc must have a valid Returned Goods Authorization Number RGA from Control Products regardless of why the product is being returned Warranty returns will be honored only with an RGA Ship warranty return products prepaid to Control Products 1724 Lake Drive West Chanhassen MN 55317 Control Products will at its option either repair or replace the product free of charge and return the repaired unit or replacement unit at the lower cost shipping prepaid Products returned for credit are subject to a 25
62. s Warranty at any time during the period of one year from original purchase date Warrantor will repair the defect and return it to you at no charge IMPORTANT The Warranty is limited to replacement of the Product ONLY Secondly because every phone line differs we strongly encourage you to fully test this Product in its 31 7 3 actual application This should include a full test involving the Product actually dialing to its designated locations and someone verifying the proper response This Warranty shall terminate and be of no further effect at the time the Products is 1 damaged by extraneous causes such as fire water power surge electrical spike lightening etc or not maintained as reasonable and necessary 2 modified 3 improperly installed 4 repaired by someone other than the Warrantor 5 used in a manner or purpose for which the Product was not intended WARRANTORS OBLIGATION UNDER THIS WARRANTY IS LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT ONLY THIS WARRANTY DOES NOT COVER PAYMENT OR PROVIDE FOR THE REIMBURSEMENT OF PAYMENT FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES It must be clear that the Warrantors are not insuring your premises or guaranteeing that there will not be damage to your person or property if you use this Product The Warrantors shall not be liable under any circumstances for damage to your person or property or some other person or that person s property by reason of the sale or use of thi
63. s now Enter your four digit security Security canceled To return to code followed by the pound Code the main menu press 1 key otherwise hang up Incorrect security code 1 Incorrect security code good bye 37 You are now in the main menu uolisod Z ay 0 Aejau QU YOIMS APIs JAYJO BY UO SO V 0 Jo Aejas y u do oj uONISod LL 84 0 Aejas y Bulyoyms pue wejyaz l4 JINOA o u Buljjeo Aq asoj ued noA jeu uosod uado jewJoy 3y s uonsod 1 SY MoOjY jqnop Ind 6u s ej e jdws s yoyIMS ajow y y uoysod LL y ul uaym 3461 y 0 yBnosy samod MOJE IM 4 U SI y9 IMS y UBYM yfi y 0 Jamod syno AjdwIs yms Jow y yL uonlsod ZL ayy Toued o1y99 9 ue Woy SUOTJDOUUOD JO lomo a ee n E pae O PJ aS o a og Be 0 a iai YMd OGAZL ALOWSY CLL HOLIMS 4 PSeS 8 Boma pon Z s288azr8Q aS OBB R ota eer soga S837 ac08a4 o nEegakt gt oO Q ROoada 2gasgazar Souda sal as FOF sa o Botgoeergn Ss maesS Baal o SeRee es B p BEeor lt 5 8 amp sa FR OoOeOoe x amp 4 ePgce eae s gt o0 Zax a YUP oR Su R sx ooa JB g a SaSBoS of lt Ow R Ss o nga 2r oga aN a B o lt gt S ga fa 38 BTY JO MOTA Itoy tcd V4 JO PIS 14 QOLASP IOYJOUL JJO 10 UO UNI ATOJOUIOI 0 YMS JOUY oy FUSAN ponunuopg g x puoddy CO
64. s played whenever you call into your FreezeAlarm from aremote location This greeting message is helpful if you plan on having relatives or neighbors call into your FreezeAlarm to check on the property If there is no answering machine or voice mail you may record a message that indicates this machine does not accept messages and requests the caller to try back later If you do not record a separate Greeting Message the factory default message is Hello this is your automated monitoring system Main Alarm Message This is played whenever the FreezeAlarm calls out with an alarm It will precede the factory alarm messages so it can contain personal information about your name address etc It is useful to record an alarm message that will help people at your call to locations better identify that the call is from your FreezeAlarm If calling to a monitored service or a contractor they may also like a custom alarm message that provides address information The factory default message is Hello this is your automated monitoring system This is then followed by our factory alarm messages telling you specifically what alarm conditions are or have recently occurred If you do record your own custom alarm message the factory recorded messages indicating the specific alarms that are occurring will still play after your custom alarm message has played Auxiliary Alarm Message This is played if the device that is attached to the Auxiliary Alarm Input is
65. uipment should be made by an authorized Canadian maintenance facility designated by the supplier Any repairs or alterations made by the user to this equipment or equipment malfunctions may give the telecommunications company cause to request the user to disconnect the equipment Users should ensure for their own protection that the electrical ground connections of the power utility telephone lines and internal metallic water pipe system if present are connected together This precaution may be particularly important in rural areas CAUTION Users should not attempt to make such connections themselves but should contact the appropriate electric inspection authority or electrician as appropriate UL amp CUL Listing The plug in transformer included with your FreezeAlarm is UL CUL listed as a Class 2 Transformer This is UL CUL listed with Besler Electric under file number E84666 34 Main Menu FA D2 You are now in the main menu For current status press 1 For remote switch status press 2 To enter programming menu press 3 2 Appendix A The current temperature is xx degrees the power is on off the battery is at x xx volts and the auxiliary input is currently not in in alarm mode Ao o 9 3 v to gt wi The position of the remote switch is q 0 gt Pre currently T1 T2 To change the position to T2 T1 press zero or to me return to the main menu
66. urity code Correct Incorrect Correct security Security code security gt code code y Incorrect security code Incorrect security code Enter your four digit security Enter your four digit security code followed by the pound code followed by the pound key key Correct Incorrect security security code d code y Correct The alarm call out is P security code now canceled y AA You are now in the main gt menu a 36 Call out menu FA D2 Hello this is your Automated Monitoring System There is an alarm condition at your remote monitored location the following alarms currently exist or have occurred recently at location There is a temperature alarm The power has been out for XXXX minutes and is currently ON OFF There is a battery alarm The auxiliary input is in alarm mode Or play the user s recorded auxiliary alarm message here instead Please check conditions at your monitored location immediately Repeat the above alarm message s To cancel the alarm call out enter your four digit security code followed by the pound NOTE If there is a personal alarm message recorded the Freeze Alarm would answer as follows Personal alarm message There is an alarm condition at your remote key Incorrect Correct Security Code Security Code y y Incorrect security code Correct The alarm callout i
67. voliage praer po your current thermasiat on the wall In step A we note thie low wobltawze power bo dhe OOM lettival on the back of the FA G2 This brings the low volmige power into n Single Pull Double Throw SPOT relay costai Installation must be performed by trained personnel and in accordance with local codes ordinances regulations and instructions If you do not feel comfortable doing this installation yourself contact your local heating or electrical contractor WARNING Improper installation could result in hazardous conditions and damage AN me following diagrams are NOT installation schematics These diagrams are intended to show you to the FreezeAlarm unit your property or person some possible ways to utilize the Deluxe FreezeAlarm s remote switch feature Control Products is not liable or responsible for Please see the warranty statement that is provided in this instruction manual for full warranty and coverage limitations and consequential damages to your person or property or installation costs of any nature exclusions 40 39

Download Pdf Manuals

Related Search

Related Contents

USER MANUAL LED CTRL01  Trust Football edition - Sverige  Manual - Cordland Serviceport.se  接続設定ガイド  【別添②】(PDF:159KB)  Model 732A Manual  VOIIS Senior Phone V1  Overlock Sewing Machine SON 90 A1  MANUALE D`INSTALLAZIONE Daitem D4000  User Manual FLARM V1.00 German  

Copyright © All rights reserved. Failed to retrieve file