Home

User`s Manual - VTech Canada

1. o 36 Announcement only mode 36 Turn announcement only mode off oron 36 Customize announcement only message 37 Base ringer o o o 37 TollsaVer ica a RE ce a 37 Message window display 39 Headset operation 40 Headset operation 40 Operating range o o 40 Batteries lees 41 Battery care and performance 41 Replace the handset battery 41 Additional information 42 Troubleshooting o o 42 Maintenance o o 49 ELCHE uty cts ah Ber oe na 49 NEED HELP This manual has all the feature operations and troubleshooting you need to install and operate your new VTech telephone Please take the time to review this manual thoroughly to ensure proper installation of this VTech innovative and feature rich product You can also visit our website at www vtechphones com for support shopping and everything new at VTech In Canada please visit www vtechcanada com VTech toll free 1 800 595 9511 In Canada dial 1 800 267 7377 Before using this telephone please read the Important Safety Instructions on page 51 Getting started Parts checklist Telephone base Handsets 2 Charger power adaptors Chargers Telephone line cord Wall mount bracket Belt clips 2 Quick start guide 9 Base power adaptor 10
2. www vtechphones com 21 22 Caller ID e If the call log is full the oldest entry is deleted to make room for the new call If the call log is empty when you try to enter to call log review the following message is displayed Review caller ID You can review the CID records via the menu as described below or by pressing W while in idle and the handset moves directly to CID review e n idle mode press MENU Press to scroll to the CALL LOG option e Press SEL Use A and Y to scroll through the call log entries When the beginning or the end of the call log is reached a double beep will sound Store caller ID Follow the steps in Review caller ID to scroll to the record to be stored e To view alternate dialing sequences press the key repeatedly The screen will scroll through the various dialing options 1 area code number area code number 1 number number only Press SEL to store the displayed number The dialing options are e f the CID record contains both name and number the CID will be stored after pressing SEL e Ifthe CID record does not contain a name you will be prompted to EDIT NAME and the screen will show www vtechphones com Caller ID f the CID record does not contain a number you will be prompted to EDIT NUMBER and the screen will show e A confirmation beep will sound and the screen wil
3. To delete all messages press and hold DELETE X while the phone is idle not during a call or message playback to delete all old messages New messages will not be deleted Record and play memos Memos are messages recorded by you or other household members intended for yourself or anyone else who uses the answering system They are saved played back and deleted like incoming messages from other callers Record a memo 1 Press REC MEMO 6 2 You will hear the voice prompt Record after the tone Press STOP when you are done 3 Speak toward the MIC on the base to record a memo for up to four minutes 4 The timer shows the elapsed time in seconds in the message window when you are recording 5 When finished recording press PLAY STOP P ll to save the memo The system announces Recorded to confirm Playback a memo See Section on Message playback page 31 about retrieving memos www vtechphones com SITO v00000000000ol0 0000000000000 INUSE Answering system operation Call screening If you wish to listen to caller s leaving their message before choosing to answer a call follow these steps 1 2 Access code To retrieve new messages from any touch tone phone from a remote location an access code is required The remote access code can be any two digit number between 10 and 99 The remote access code has been set to 19 at the factory but it can be changed at a
4. Headset jack 2 5mm CID scroll down Talk flash Dialing keys 0 9 Redial pause Speaker LCD display Directory scroll up Volume control Menu select Off clear Intercom 14 Mute remove www vtechphones com 4931009 GO Base unit layout Fr ON 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000009000000000000 0000000000900 09009 00000000 FIND HANDSET 000000000000000 000 0000000 1 gt o0000000000000 ESOO 0000000000000 9000 9000 o y 000900 o o o 00 o ep E recmeno bere ll k o o o o o o o o o o o o o o o o oo o o o o o o o o o o o o o o o Q 1 e e 2 ke o n E m D Q Oc RO mv 5 8 bie amp DIGITAL SPREAD SPECTRUM l DIGITAL Y ANSWERING SYSTEM CHARGE IN USE 7 8 9 Find handset 10 Delete Record memo 11 Repeat Time set 12 Skip Change 13 Mailbox play stop Setup Volume control Charging LED In use LED Answer on off ooonuocns om www vtechphones com 11 12 Basic operation Handset icons On when the microphone is muted On when there are new call log entries On when the handset ringer is muted Low battery indi
5. an unwritten warranty that the product is fit for ordinary use are limited to one year from date of purchase Some states do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you Inno event shall VTech be liable for any indirect special incidental consequential or similar damages including but not limited to lost profits or revenue inability to use the product or other associated equipment the cost of substitute equipment and claims by third parties resulting from the use of this product Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you 50 www vtechphones com Important safety instructions When using your telephone equipment basic safety precautions should always be followed to reduce the risk of fire electric shock and injury including the following onRON 11 12 13 14 15 Read and understand all instructions Follow all warnings and instructions marked on the product Unplug this product from the wall outlet before cleaning Do not use liquid or aerosol cleaners Use a damp cloth for cleaning Do not use this product near water for example near a bath tub kitchen sink or swimming pool Do not place this product on an unstable surface such as a table shelf or stand The product may fall causing serious damage Slots and openings in the back or bottom o
6. 2 Lift out the old battery and disconnect 3 Align the two holes in the new battery s plug with the socket pins and snap the plug into place Snap the battery in the compartment as described in Installation on page 5 4 Replace the cover by sliding it up into place 5 The new battery must be fully charged before using the phone Place the handset in the base or charger and allow it to charge for at least 16 hours the first charge The telephone might operate before that but for best performance let the battery charge fully this product in accordance with the instructions and limitations specified in this user s manual www vtechphones com 41 Troubleshooting If you have difficulty operating your phone the suggestions below should solve the problem If you still have difficulty after trying these suggestions call VTech Communications at 1 800 595 9511 In Canada call VTech Telecommunications Canada Ltd at 1 800 267 7377 Problem Suggestion My phone doesn t Make sure the power cord is plugged in work at all Make sure the telephone line cord is plugged firmly into the base unit and the telephone wall jack Disconnect the AC adaptor for a few minutes and then reconnect it Charge the battery in the handset for at least 16 hours For optimum daily performance return the handset to its base when not in use Reset the base Unplug the unit s electrical power Wait for 15 seconds then plug it back in Allow up
7. Announcement only mode is on Answering system is answering a call or being accessed from a remote location flashing System is in programming mode On or OFF Displayed for one second when any answering system setting is turned on or off 02 04 06 tS Change number of rings until the system answers the call www vtechphones com 39 QU o e 2 o Lo 1 o ES Q 3 e To purchase a headset visit us on the web at www vtechphones com or call VTech Customer Service at 1 800 595 9511 In Canada contact VTech Telecommunications Canada Ltd at www vtechcanada com or 1 800 267 7377 40 Headset operation Headset operation You can use this telephone handsfree when you install any VTech 2 5 mm headset purchased separately Plug the headset into the jack located on the left side of the handset under the small rubber flap Do not force the connection but make sure the plug fits securely Operating Range This cordless telephone operates within the maximum power allowed by the Federal Communications Commission FCC Even so this handset and base can communicate only over a certain distance which can vary with the locations of the base and handset the weather and the construction of your home or office If you receive a call while you are out of range the handset might not ring or if it does ring the call might not connect well when you press TALK Move closer to the base
8. Batteries 2 11 User s manual ouoosrsomcza To purchase replacement batteries visit us on the web at www vtechphones com or call VTech Communications Inc at 1 800 595 9511 In Canada contact VTech Telecommunications Canada Ltd at www vtechcanada com or 1 800 267 7377 5 Telephone 6 Wall mount 7 Belt clips 2 8 Quick start line cord bracket guide md 9 Base power adaptor 10 Batteries 2 11 User s manual www vtechphones com Installation Choose a location For maximum performance of your cordless telephone system 1 2 Choose a central location for your base unit Install your base unit and extension handset away from electronic equipment such as personal computers television sets and microwave ovens In locations where there are multiple cordless telephones separate base units as far as possible from each other Install yourtelephone equipment away from heat sources and direct sunlight Avoid excessive moisture dust or extreme cold Install handset battery 1 Align the two holes in the plug with the socket pins then snap the plug into place Place the battery in the compartment with the wires in the upper right corner Replace cover by sliding it upwards until it clicks into place Be sure to charge the battery for 16 hours before using your phone www viechphones com Use only the provided VTech battery or equivalent Place the handset in i
9. HS1 Conference call It is possible to establish a conference call between two handsets and the external line While HS1 is on an external call HS2 can join the call by pressing TALK A conference call will be established Find handset Tolocate a misplaced handset press FIND HANDSET on the base to page all system handsets To end the page at the base press FIND HANDSET again To end the page at the handset press SPEAKER OFF or any dial pad key 0 9 www vtechphones com Directory Your phone can store up to 50 numbers with names in the directory Each directory location can hold up to 32 digits for the number and 16 characters for the name When one handset is accessing the directory no other system handsets can access it If this is attempted NOT AVAILABLE AT THIS All handsets TIME will be displayed on the second handset share a common directory which is stored in the base Entries Store a new entry Press MENU f inserted into e With DIRECTORY selected press SEL one handset are Press W to select STORE Press SEL available for all e You will be prompted to ENTER NUMBER Use the dialing keys handsets and if one deletes a directory entry it will disappear from all handsets While entering e You will then be prompted to ENTER NAME Use the dialing keys numbers to spell the name Press SEL press and hold REDIAL PAUSE to add pauses if neces
10. messages If there are no new messages the mailbox all messages will be played back Play new messages Plays all new not previously listened to messages Delete message currently playing in the mailbox Delete a message 4 Delete all old 33 Press ie any ode is playing to delete all old messages previously reviewed messages Repeat a message Press to repeat current message Repeat the previous 44 Press to repeat previous message message www vtechphones com Answering system operation Skip a message Record Announcement Review remote access code Change remote access code Turn system off Action to follow Press to stop messages from being played Press to skip to the next message Listen to current outgoing announcement Press after hearing the beep Record your new announcement Press 5 to stop recording The system will play back the announcement for confirmation Press after hearing the beep Speak after the system announces Record after the tone Press STOP when you are done Start recording your memo Press 5 to stop Listen to current remote access code Change remote access code When the system announces Answering machine off press 0 again to turn the system back on When the system is off it answers after 10 rings and announces Please enter your remote access code Enter your remote access code www vtechphones com Your phone may not respond to remote acce
11. new messages The system will announce the number of new messages recorded and then start playing them If there are no new messages all old messages will be played After the system plays the last message you ll hear end of messages Announcements 1 2 3 4 bd riga during playback Press REPEAT to repeat the message currently playing Press Press DELETE X to delete the message currently playing Press PLAY STOP to stop playback When playback begins the system announces the total number of messages Before each message you will hear the day and time it was TOTO Y oo 00000000 oo o received 00000000000 0 o REC MEMO DELETE After the last message you will hear end of messages If the system has less than five minutes of recording time left the time remaining will also be announced Press A and V to adjust the speaker volume Press SKIP gt once to skip to the next message or press and hold to speed up the message playback using the voice prompt of day and time as index twice to listen to the previous message or press and hold to slow down the message playback process www vtechphones com 31 Ww o o i Le Lo 1 o ES fe 3 Memos less than one second will not be recorded You can record a memo up to four minutes long 32 Answering system operation Delete all messages
12. not use excess water or cleaning solvents of any kind Remember that electrical appliances can cause serious injury if used when you are wet or standing in water If your base unit should fall into water DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD AND TELEPHONE LINE CORDS FROM THE WALL Then pull the unit out by the unplugged cords Warranty What does this limited warranty cover The manufacturer of this VTech product VTech Communications warrants to the holder of a valid proof of purchase Consumer or you that the product and all accessories provided by VTech in the sales package Product are free from material defects in material and workmanship pursuant to the following terms and conditions when installed and used normally and in accordance with operation instructions This limited warranty extends only to the Consumer for Products purchased and used in the United States of America What will VTech Communications do if the Product is not free from material defects in materials and workmanship during the limited warranty period Materially Defective Product During the limited warranty period VTech s authorized service representative will repair or replace at VTech s option without charge a Materially Defective Product If we repair this product we may use new or refurbished replacement parts If we choose to replace this product we may replace it with a new or refurbished product of the same or similar de
13. play and the volume bar is increased or decreased each time the setting is adjusted At the lowest setting the display will show OR From idle off mode press volume control keys on the side of handset will directly go to the RINGER VOLUME menu Press A and y to the desired ringer volume Ringer volume will be adjusted Ring tone From the idle off mode press SEL then A or Y until RINGER TONE is displayed Press SEL You can then use A or w or enter a digit 0 through 9 to sample the ring tone Press SEL to confirm Key tone From the idle off mode press SEL then A or V to KEY TONE Press SEL The current setting will be shown Press A or to scroll to ON or OFF When set to ON the handset will emit a beep whenever a key is pressed When the desired option is shown press SEL Handset name preset to VTECH Youcan give each handset its own unique name such as kitchen or office The name is shown in the first line when the handset is idle The name can be a up to 16 characters in length The handset will not ring when a call comes in if ringer volume is in the lowest setting Ww o o i Le Lo 1 o ES fe 3 www vtechphones com 25 The clear voicemail function only cancels the voicemail indicator on the screen of the handset When the phone is set for pulse dial mode it is possible to switch to temporary tone mode during an ongoi
14. to one minute for the handset and base to reset You may need to purchase a new battery please refer to the Batteries section of this user s manual cannot get a dial Try all the suggestions above tone Move the handset closer to the base You might have moved out of range Your line cord might be malfunctioning Try installing a new line cord If the previous suggestions don t work disconnect the base unit from the telephone jack and connect a different phone If there is no dial tone on that phone either the problem is in your wiring or local service Contact your local telephone company 42 www vtechphones com Troubleshooting Suggestion Problem cannot dial out UNABLE TO CALL TRY AGAIN displays on my handset Make sure you have a dial tone before dialing The handset may take a second or two to find the base and produce a dial tone This is normal Wait an extra second before dialing Make sure your phone is set to the correct dial mode for the type of service that you have pulse or touch tone Refer to the Installation section of this user s manual to set the dial mode If the other phones in your home are having the issue the problem is in your wiring or local service Contact your local telephone company Eliminate any background noise Noise from a television radio or other appliance may cause the phone not to dial out properly If you cannot eliminate the background noise first try muting the handset before d
15. use the supplied VTech belt clip FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments ACTA The label on the back or bottom of this equipment contains among other things a product identifier in the format US AAAEQ TXXXx This identifier must be provided to your local telephone company upon request The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with applicable Part 68 rules and technical requirements adopted by ACTA A compliant telephone cord and modular plug is provided with this product It is designed to be connected to a compatible modular jack that is also compliant An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines See Installation Instructions in the users manual The Ringer Equivalence Number REN is used to determine how many devices you may connect to your telephone line and still have them ring when you are called The REN for this product is encoded as the 6th and 7th characters following the US in the product identifier e g if is 03 the REN is 0 3 In most but not all areas the sum of all RENs should be five 5 0 or less For more information please contact your local telephone company This equipment may not be used with Party Lines If you have specially wired alarm dialing equipment connected to
16. 30 M Maintenance 49 Making calls 13 55 Index Menu features 29 Message alert 36 Message playback 31 Message window display 39 Mute 14 N Noise filter 8 O Operating range 40 Options during playback 31 Outgoing announcement 29 P Parts checklist 4 Playback a memo 32 R Record a memo 32 Record and play memos 32 Record outgoing announcement 29 Redial 13 Remote access 34 Replace the handset battery 41 Review dial from the directory 19 Review caller ID 22 Ringer volume 25 56 S Setting the remote access 33 Store a new entry 17 Store caller ID 22 T Technical specifications 54 To check day and time 28 Toll saver 37 Troubleshooting 42 48 Turn the announcement only mode off or on 36 Turn your answering system off and on 27 Ww Wall mounting 7 Warranty 49 www vtechphones com VTECH TELECOMMUNICATIONS LTD A member of THE VTECH GROUP OF COMPANIES Distributed in the U S A by VTech Communications Inc Beaverton Oregon Distributed in Canada by VTech Telecommunications Canada Ltd Richmond B C Copyright 2005 for VTECH TELECOMMUNICATIONS LTD Printed in China 91 000468 010 000 vtec Innovation Beyond Technology
17. IN Call forward An external call can be forwarded or transferred from one handset HS1 to another system handset HS2 While HS1 is on an external call you can forward the call to HS2 by pressing and holding INT CALL FORWARDED will display on HS1 HS2 will begin ringing and display INCOMING CALL Press TALK FLASH on HS2 to answer the call Ww o o i Le Lo 1 o ES fe 3 If the forwarded call is not answered within 30 seconds the external call will be returned to HS1 and the screen will display CALL BACK and ring for 30 seconds If the returned call is not answered within 30 seconds the external call will end automatically www vtechphones com 15 e For the FIND HANDSET function to work the system handsets need to be in idle off mode 16 Handset operation Call transfer The originating handset HS1 can transfer an external call to another handset HS2 by pressing INT The external call is put on hold and the screen will display CALLING OTHER HANDSET HS2 will ring and display OTHER HANDSET IS CALLING HS2 can pick up the transferred call by pressing TALK FLASH An intercom call is established between HS1 and HS2 and they can discuss the call prior to the external call being transferred to HS2 CALL TRANSFERRED will display on the HS1 If the transferred call is not answered within 100 seconds the external call will be returned to
18. aller ID or CID If the number is already in the directory the name of the caller will also be displayed f you answer It is also capable of displaying CID information in conjunction with a call waiting alert signal call a call before waiting caller ID With call waiting caller ID the CID data is displayed so you can decide whether ie to answer the incoming call or continue with your current conversation Your phone can hold up to screen it will not 50 CID entries be in the caller ae ID log NOTES ABOUT CALLER ID amp CALL WAITING CALLER ID These are subscription services g B 2 Press OFF provided by most regional telephone service providers You must subscribe to these services to any time to exit jus get the benefits of these features If you do not subscribe to CID services you can still use your caller ID log D phone and the other features it offers The NEW icon o Due to regional incompatibilities CID information may not be available for every incoming call In in the lower left o addition the calling parties may intentionally block their name and or phone number from being corner indicates Lo sent the call has D not yet been LH reviewed E e As new ClD call waiting ID records are received your handset 2 displays will alert you to the new CID records for example e After you review all new CID records the NEW call indicator will be turned off and the screen will show
19. ase 52 www vtechphones com FCC ACTA and IC regulations Remain on the line and briefly explain the reason for the call before hanging up Perform such activities in off peak hours such as early morning or late evening Industry Canada This equipment complies with regulations RSS210 and CS 03 of Industry Canada Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device The term IC before the certification registration number only signifies that the Industry Canada technical specifications were met The Ringer Equivalence Number REN for this terminal equipment is 0 1 The REN is an indication of the maximum number of devices allowed to be connected to a telephone interface The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five The RBRC Seal The RBRC Seal on the nickel metal hydride battery indicates that VTech Communications Inc is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives when taken out of service within the United States and Canada The RBRC program provides a convenient alternative to placing used nickel metal hydride batteries into the trash or municipal waste which m
20. attery Base 9V DC O 600mA Charger 9V DC O 200mA Directory 50 Memory locations up to 32 digits 16 characters per location CID 50 Memory locations www vtechphones com Index A Additional information 42 54 Adjust handset volume 13 Announcement only mode 36 Announcements 31 Answering calls 13 Answering system operation 27 38 B Base LEDs 12 Base ringer 37 Base unit layout 11 Basic operation 12 41 Batteries 5 41 Belt clip 8 C Caller ID 21 24 Call forwarding 15 Call screening 33 Call transfer 16 Characters by number 18 Check battery indicator 7 Check for dial tone 7 Choose a location 5 Clear voicemail 26 Conference Call 16 Connect power to base unit chargers 6 Connect to phone line 8 Customize the announcement only message 37 D Day and time announcements 27 Delete a directory entry 20 Delete all messages 32 Delete caller ID 24 Dial from caller ID 24 Dial type 26 Directory 17 20 DSL 8 E Edit a directory entry 19 F FCC ACTA and IC regulations 52 Find handset 16 Flash 13 G Getting started 4 11 www vtechphones com H Handset icons 12 Handset layout 10 Handset LEDs 12 Handset name 25 Handset operation 13 16 Handset settings 25 26 Headset operation 40 l If you subscribe to DSL service 8 Important safety instructions 51 Installation 5 8 Install handset battery 5 Intercom 14 Internet 8 K Key tone 25 L Language 26 Listen to outgoing announcement
21. ay be illegal in your area VTech s participation in RBRC makes it easy for you to drop off the spent battery at local retailers participating in the RBRC program or at authorized VTech product service centers Please call 1 800 8 BATTERYTM for information on Ni MH battery recycling and disposal bans restrictions in your area VTech s involvement in this program is part of its commitment to protecting our environment and conserving natural resources RBRC is a registered trademark of Rechargeable Battery Recycling Corporation www vtechphones com 53 gt Q Z gt e 5 c o gt Technical specifications Enhanced 5 8GHz technology your phone operates on a dual band transmission that combines the best of 5 8GHz and 2 4GHZ technologies providing enhanced performance over standard cordless telephones Frequency Control Transmit Frequency Receive Frequency Channels Nominal Effective Range Size Weight Power Requirements Memory 54 Crystal controlled PLL synthesizer Base 5725 5850 MHz Handset 2400 2483 5 MHz Base 2400 2483 5 MHz Handset 5725 5850 MHz 95 Maximum power allowed by the FCC and IC Actual operating range may vary according to environmental conditions at the time of use Handset 150 3mm X 50 3mm X 37 3mm Base 166 5mm X 108 2mm X 64 5mm Charger 80mm X 89 3mm X 51mm Handset 120 4 grams Base 308 grams Charger 64 4 grams Handset 600mAH Ni MH B
22. cator or charging indicator Onwhen in handsfree mode Base LEDs IN USE On when the phone is off the hook Flashes when an extension phone is off the hook Handset LEDs CHARGE On when the handset is charging in the base ON OFF On when the answering system power is on www vtechphones com Handset operation Making calls e Press 4 or SPEAKER to use the handset speakerphone feature then dial the phone number OR Dial the phone number first then press amp amp or SPEAKER Press OFF to end your call or place the handset in its base or charger Answering calls Press 3 SPEAKER or any dialing keys Press OFF to end your call or place the handset into its base or charger Adjust handset volume The volume control is on the side of the handset During a call press the VOLUME or keys to adjust the listening volume to a comfortable level When you reach the maximum or minimum setting a double beep will sound Flash function When you subscribe to call waiting service from your telephone company press Z4 to switch to the new call when you receive a call waiting signal Press 2k again to switch back to the original call Redial Press REDIAL PAUSE to display the last telephone number dialed from the handset up to 32 digits Use A or w to scroll through the last five numbers dialed When the beginning or the end of the redial list is reached a double beep will sound www vtechph
23. ect to phone line Plug one end of the telephone line cord into the telephone line jack at the bottom of the telephone base Then plug the other end of the cord into the wall telephone outlet 6 www vtechphones com Installation Check battery indicator If you receive a check battery warning it indicates one of the following 1 There is no battery in your handset You need to install the supplied battery into your handset see Install handset battery on page 5 2 The battery needs to be replaced 3 The battery has been installed incorrectly Please reinstall see Install handset battery and or see the diagram in the battery compartment of the handset Check for dial tone TALK After the battery is charged press Son the handset You should hear a dial tone If not see Troubleshooting www vtechphones com If the phone will not be used for a long period of time remove the battery to prevent possible leakage If you have any trouble installing your phone please refer to the Troubleshooting section near the end of this manual When in low battery mode the keypad sounds backlighting and speakerphone features will not work When the battery has been charged these features will return to their normal function Q 1 m 2 ke 7 n E m D Q Installation If you subscribe to DSL service If you hear interference during conversations and or your caller ID features are not functioning proper
24. ectory entry e Follow the steps in Review dial from the directory above to reach the entry to be edited Press SEL to enter number edit mode Press MUTE REMOVE to backspace and delete numbers or press CID v or DIR A to move the cursor to the number you wish to change Then re enter the correct number s by pressing the dialing keys 0 9 Press and hold REDIAL PAUSE to add pauses if necessary www vtechphones com When reviewing the directory the second line of the display will show the number up to 16 digits For numbers longer than 16 digits only the first 13 digits will be shown Press or to scroll the phone number to see the additional digits e fthere are no entries in the directory when it is accessed DIRECTORY EMPTY will display 19 Ww o o i Le Lo 1 o LS 3 Directory Press SEL Press MUTE REMOVE to backspace and use the digit keys to enter the correct name e Press SEL You ll hear a confirmation tone Delete a directory entry Follow the steps in Review dial from the directory page 19 to reach the entry to be deleted Press MUTE REMOVE to delete the entry A confirmation tone will sound The handset will then advance to the next entry if any 20 www vtechphones com Caller ID Caller ID call waiting ID Your phone is capable of displaying the number of the calling party before you answer the phone c
25. et better reception not installed in a low area If the other phones in your home are having the issue the problem is in your wiring or local service www vtechphones com Troubleshooting Problem Suggestion The charge light is off Clean the handset and base charging contact each month using a pencil eraser or cloth Make sure the power and line cords are plugged in correctly and firmly Reset the base Unplug the unit s electrical power Wait for 15 seconds then plug it back in Allow up to one minute for the handset and base to reset Your phone might be malfunctioning Please refer to the Warranty section of this user s manual for further instruction My Caller ID isn t Caller ID is a subscription service You must subscribe to this service for this feature to work working on your phone Your caller must be calling from an area that supports caller ID Both you and your caller s telephone companies must use caller ID compatible equipment My answering Make sure system is turned ON the ON OFF key is illuminated machine is not Make sure the announce only feature is set to OFF recording messages cannot hear recorded Using the base volume control raise the volume to a comfortable listening level messages CL is flashing in the You need to set the day and time Refer to the section s on setting day and time in this base message display user s manual window www vtechphones com
26. ether there are new messages when calling remotely from a touch tone phone If there are new messages on the answering system the system picks up the call after two rings When retrieving messages from a location where long distance charges apply you may disconnect your call after three rings to avoid long distance charges www vtechphones com 37 W o 2 i o E 1 o ES o 3 38 Answering system operation 1 e Press SETUP six times the system announces Number of rings To change the setting press CHANGE Press CHANGE to confirm the current setting will display in the message window on the base Press CHANGE to set the number of rings to 2 4 6 or toll saver Press SETUP to save and advance to the next setup option or press PLAY STOP W to save and exit www vtechphones com Answering system operation Message window display Explanation No incoming messages Total number of messages and memos or message number currently playing Number flashes if there are new messages Playback or ringer volume level selected when or is pressed E 1 10 99 Current remote access code while setting Elapsed time while recording a memo or announcement up to 90 1 99 counting Seconds 99 flashing Memo recording exceeds maximum time of 99 seconds Memory is full Messages must be deleted before new messages can be F flashing recorded CL flashing Clock needs to be set
27. f purchase does not meet the terms of this limited warranty VTech will notify you and will request that you authorize the cost of repair prior to any further repair activity You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty What must you return with the Product to get warranty service 1 Return the entire original package and contents including the Product to the VTech service location along with a description of the malfunction or difficulty 2 Include valid proof of purchase sales receipt identifying the Product purchased Product model and the date of purchase or receipt and 3 Provide your name complete and correct mailing address and telephone number Other Limitations This warranty is the complete and exclusive agreement between you and VTech It supersedes all other written or oral communications related to this Product VTech provides no other warranties for this product The warranty exclusively describes all of VTech s responsibilities regarding the product There are no other express warranties No one is authorized to make modifications to this limited warranty and you should not rely on any such modification State Law Rights This warranty gives you specific legal rights and you may also have other rights which vary from state to state Limitations Implied warranties including those of fitness for a particular purpose and merchantability
28. f the base unit and handset are provided for ventilation To protect them from overheating these openings must not be blocked by placing the product on a soft surface such as a bed sofa or rug This product should never be placed near or over a radiator or heat register This product should not be placed in any area where proper ventilation is not provided This product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply in your home consult your dealer or local power company Do not allow anything to rest on the power cord Do not install this product where the cord may have anyone walking on it Never push objects of any kind into this product through slots in the base or handset as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock Never spill liquid of any kind on the product To reduce the risk of electric shock do not disassemble this product but take it to an authorized service facility Opening or removing parts of the base or handset other than specified access doors may expose you to dangerous voltages or other risks Incorrect reassembling can cause electric shock when the product is subsequently used Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock Unplug this product from the wall outlet and refer servicing to an authorized service facili
29. hphones com THE TUER TOT UTI BUONIPpPy Troubleshooting Problem My handset does not ring when receive a call My calls fade or cut in and out while I m using my handset 46 Suggestion Other electronic products can cause interference with your cordless phone Try installing your phone as far away from these types of electronic devices as possible wireless routers radios radio towers pager towers cell phones intercoms room monitors televisions personal computers kitchen appliances and other cordless phones Your line cord might be malfunctioning Try installing a new line cord Other electronic products can cause interference with your cordless phone Try installing your phone as far away from these types of electronic devices as possible wireless routers radios radio towers pager towers cell phones intercoms room monitors televisions personal computers kitchen appliances and other cordless phones Microwaves operate on the same frequency as your phone It is normal to experience static on your phone while the microwave is running Do not install this phone in the same outlet or near the microwave If your phone is plugged in with a modem or surge protector plug the phone or modem surge protector into a different location If this solves the problem re locate your phone or modem farther apart from one another or use a different surge protector Relocate your phone to a higher location The phone will g
30. ialing or dialing from another room in your home with less background noise Only two handsets of your phone system can be in use off hook at a time For example if HS1 and HS2 are on a call and HS3 presses TALK UNABLE TO CALL TRY AGAIN will display Be sure only two handsets are in use at a time Move the handset closer to the base You might have moved out of range If the handset is in its base and the charging light does not light refer to the Charge light is off section in this troubleshooting guide Reset the base Unplug the unit s electrical power Wait for 15 seconds then plug it back in Allow up to one minute for the handset and base to reset Other electronic products can cause interference with your cordless phone Try installing your phone as far away from these types of electronic devices as possible wireless routers radios radio towers pager towers cell phones intercoms room monitors televisions personal computers kitchen appliances and other cordless phones www vtechphones com STRE TUER Tel UTI BUONIPpy Troubleshooting Problem Suggestion The battery does not Charge the battery in the handset for 16 hours For optimum daily performance return the hold a charge handset to its base when not in use You may need to purchase a new battery please refer to the Batteries section of this user s manual Your phone might be malfunctioning Please refer to the Warranty section of this user s manual for f
31. l display If both name and number are missing for example as in a private listing the request will be rejected with the message Ww o o 2 9 Lo 1 o ES ce 3 fthe number already exists in the directory the entry will not be stored and the screen will show fthe directory is full the screen will show www vtechphones com 23 24 Caller ID Dial from caller ID Follow the steps in Review caller ID page 22 to scroll to the entry to be dialed To change how the number will be dialed press repeatedly The screen will scroll through the dialing options Press FLASH or the SPEAKER key to dial the number Delete caller ID Follow the steps in Review caller ID page 22 to scroll to the record to be deleted Press the MUTE REMOVE key to delete the desired record A confirmation beep will sound and the previous CID record will be displayed on the screen To delete all the CID records press and hold the MUTE REMOVE key The screen will ask if you want to DELETE ALL CALLS Press SEL to confirm Press OFF to return to the CID record previously displayed www vtechphones com Handset settings Ringer volume From the idle off mode press SEL then A or Y until RINGER VOLUME is shown Press SEL The current ringer volume will be shown Press A and v or enter a digit 0 through 6 to the desired ringer volume The current ring tone will
32. leshooting Problem Suggestion hear other calls while Disconnect your base unit from the telephone jack and plug in a regular telephone If you using my phone still hear other calls the problem is probably in your wiring or local service Call your local telephone company hear noise in the Make sure the power cord is plugged in handset and none of the keys or buttons work My handset does not Make sure you have the ringer activated Refer to the section s on ringer selection in this ring when receive user s manual a call Make sure the telephone line cord is plugged firmly into the base unit and the telephone jack Make sure the power cord is plugged in You may be too far from the base unit Charge the battery in the handset for 16 hours For optimum daily performance return the handset to its base when not in use You may have too many extension phones on your telephone line to allow all of them to ring Try unplugging some of the other phones The layout of your home or office might be limiting the operating range Try moving the base to another location preferably on an upper floor If the other phones in your home are having the issue the problem is in your wiring or local service Contact your local telephone company charges may apply Test a working phone at the phone jack If another phone has the same problem the problem is the phone jack Contact your local telephone company charges may apply www vtec
33. ly install a noise filter to the telephone line between the base unit and the telephone line jack Contact your DSL provider to obtain a noise filter Telephone line Noise filter For T cord DSL users To single telephone jack RJ11C Belt clip optional To attach To remove www vtechphones com Wall mounting optional The wall mount brackets are designed for use on standard wall mount plates only 1 2 Plug the connector of the base power adaptor to the connector jack at the bottom of the base unit Then plug the adaptor into an electrical outlet Connect the telephone line cord to the jack at the bottom of the base unit and the other end to the wall jack Line up the tabs on the wall mount adaptors with the holes at the bottom of the base unit back of the charger Snap the wall mount bracket firmly in place Mount the base unit on the wall Position the base unit so that the mounting studs will fit into the holes on the wall mount bracket Slide base unit down on the mounting studs until it locks into place www vtechphones com e 1 e 2 o 7 p o pa 1 a 10 Handset layout ONDARON ek 2l 0 Onno Earpiece
34. n 19 Delete a directory entry 20 Galler ID o das a a A 21 Caller ID call waiting ID 21 Review caller ID 22 Store callerlD 22 Dial from caller ID 24 Delete caller ID 24 Handset settings 25 Ringer volume 66x oo omoes 25 Ringtone uox a e ks 25 Kev Tong cs terora o Ro ox o e oom d 25 Handset name s s s es raa o o o oes 25 Language eee sorra x Ro ee aw 26 Clear voicemail o 26 Dialtype c e or o a 26 Answering system operation 27 Turn your answering system off andon 27 Day and time announcements 27 To check day and time 28 Outgoing announcement 29 Record outgoing announcement 29 Menufeatures 29 Table of contents Listen to outgoing announcement 30 Important safety instructions 51 Message playback les 31 FCC ACTA and IC regulations 52 Announcements llle 31 Technical specifications 54 Options during playback Sis A a ish slo m v Ron ORE nt ese cal ase 55 Delete all messageS 32 Record andplaymemos 32 Record a memo lees 32 Playback a memo aaa 32 Call screening oaoa 33 Set remote access oaaao 33 Remote access naaa 34 Message alert
35. nes com 49 gt o p gt 2 S h 3 5 e gt Warranty 5 Product whose warranty quality stickers Product serial numbers plates or electronic serial numbers have been removed altered or rendered illegible or 6 Product purchased used serviced or shipped for repair from outside the United States or used for commercial or institutional purposes including but not limited to Products used for rental purposes or 7 Product returned without valid proof of purchase see 2 below or 8 Charges for installation or set up adjustment of customer controls and installation or repair of systems outside the unit How do you get warranty service To obtain warranty service in the United States of America call 1 800 595 9511 for instructions regarding where to return the Product Before calling for service please check the user s manual A check of the Product controls and features may save you a service call Except as provided by applicable law you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of Product s to the service location VTech will return repaired or replaced product under this limited warranty to you transportation delivery or handling charges prepaid VTech assumes no risk for damage or loss of the Product in transit e If the Product failure is not covered by this limited warranty or proof o
36. ng call by pressing TONE Once pressed tone will be used for rest of the call After you hang up the phone will return to pulse dialing for the next call 26 Handset settings From idle off mode press SEL then A or W to HANDSET NAME Press SEL The display will show the current setting for example Press DELETE to backspace then enter the desired name NOTE The characters are entered in the same way as for the telephone directory see the table on page 18 Press SEL to confirm Language preset to English From the idle off mode press MENU then A or V to LANGUAGE Press SEL Press A or V to select from English Spanish or French Press SEL to confirm Clear voicemail e From the idle off mode press MENU then A or W to CLR VOICEMAIL Press SEL Press SEL again to confirm or press OFF to exit Dial type preset to tone From idle off mode press MENU then A or W to DIAL TYPE Press SEL then A or Y to scroll to TONE or PULSE Press SEL to confirm www vtechphones com Answering system operation Your cordless telephone system provides you with leading edge digital technology with an answering system that can record up to 99 messages or approximately 15 minutes of recording time Each message can be no longer than four minutes Turn your answering system off and on ANS ON OFF v 9 Press the ANS ON OFF butt
37. ny time for your Set the playback VOL on the base unit to a level greater than 1 by pressing A or V If you decide to answer a call while the caller is leaving a message simply press TALK FLASH on the handset The answering system will stop and you can begin speaking to the caller 00000000 convenience Setting the remote access 1 2 3 Press SETUP twice the system announces Remote access code To change the setting press CHANGE Press CHANGE the system announces the current setting the default remote access code is 19 Press and release CHANGE to advance the remote access code number by one Press and hold CHANGE to advance the remote access code by 10 When the desired number is announced Press SETUP to save and advance to the next menu option Or press PLAY STOP P M to save and exit www vtechphones com 33 W o 2 i o E 1 o ES o 3 34 Answering system operation Remote access 1 From any touch tone telephone dial your telephone number 2 When the outgoing announcementis playing enter the two digit remote access code before taking the following actions 3 Hang up to end the call and save all messages If you pause for more than 10 seconds during remote access you will hear a help menu listing all features and commands If no command is entered for the following 20 seconds the call will end automatically Purpose Play all messages in Listen to new
38. on on the base to turn the answering system on or off When the system is on the ANS ON OFF key will be lit outgoing messages will be played to the caller and incoming messages can be recorded s sa Day and time announcements 0 lv Cra To set day and time IGI TIME SET pO Before playing each recorded message the answering system announces the day and time the message was received Each time you press CHANGE the day hour minute or year advances by one When you hear the correct setting press TIME SET to move to the next setting NU NS CHARGE INUSE www vtechphones com 27 I o 2 i o E 1 o ES o 3 Answering system operation Before using the answering system you should follow the steps to set the day and time so messages are dated correctly You can choose to set the 1 Press TIME SET the system announces the current setting tme manually 2 Press TIME SET again ollowing the 2 instruction on this 3 The answering system will announce the day of the current day setting Press CHANGE on page or you can the base until you hear the correct setting allow it to be set 4 Press TIME SET the system announces the current hour setting gi 5 Press CHANGE until you hear the correct hour ID information 6 Press TIME SET the system announces the current minute setting Caller IDis a 7 Press CHANGE until you hear the correct minute subscription 8 P
39. ones com The procedure to change the volume is the same for the handset earpiece speakerphone and headset Use amp to access phone company subscriber services as described by your provider If the redial memory is empty and REDIAL is pressed a double beep will sound 13 Ww o o 2 Le Lo 1 o ES fe 3 14 Handset operation Press OFF to exit the redial review list When the desired number is reached press 4 or SPEAKER to dial When the desired entry displays press MUTE REMOVE to delete it You ll hear a confirmation beep Mute During a call press the MUTE REMOVE key to disable the microphone The screen will briefly display MUTED Press MUTE REMOVE again to return to normal two way conversation MICROPHONE ON will briefly display Intercom Press INT on the originating handset HS1 and CALL OTHER HANDSET will show on the screen The destination handset HS2 will show OTHER HANDSET IS CALLING Press INT TALK SPEAKER or any dialing key on HS2 to pick up the call The display will change to INTERCOM www vtechphones com Handset operation Intercom continued Press INT OFF or place HS1 or HS2 back in the base or charger to end the call If HS2 is out of range the screen on HS1 will show NO SIGNAL CALL ENDED If HS2 is off in use or out of range HS1 will show UNABLE TO CALL TRY AGA
40. ress TIME SET the system announces the current year setting poate 9 Press CHANGE until you hear the correct year e Inthe event ofa 10 Press TIME SET to confirm the system will announce the new setting You ll hear a confirmation power outage the tone day and time will aad tobe reset Pressing and holding the CHANGE button when setting the time and date will advance the minutes or years by increments of 10 To check day and time Press TIME SET at any time to listen to the current setting without changing it 28 www vtechphones com Answering system operation Menu features System Announces Description Announcements Outgoing message to tell callers to leave a message Set code to access remotely from a touch tone phone Message alert alert Beeps every 10 seconds when there are new messages Announcement only EES y Outgoing message only No recording of incoming messages record no ER Baseringer ringer Turn base ringer on or off Number of rings Answering machine picks up after 2 4 or 6 rings Or set to toll saver mode see page 37 Outgoing announcement Your telephone answering system is pre programmed with an announcements for normal answer and record mode and for announcement only mode If the phone is set up to record messages the phone answers calls with Hello Please leave a message after the tone You can use this announcement or replace it with your own recording Record ou
41. s until you hear Announcement only Record no messages To change the setting press CHANGE Press CHANGE until you hear the option you want on or off Press PLAY STOP P Ml to save and exit www vtechphones com Answering system operation Customize the announcement only message 1 2 3 Press SETUP four times the system announces Announcement only Record no messages To change the setting press CHANGE Press CHANGE until you hear the desired option Press SETUP three times the system announces Announcement Press PLAY or press RECORD To continue press SETUP Press REC MEMO The system announces Record after the tone Press STOP when you are done Speak toward the MIC on the base to record an announcement for up to 90 seconds The elapsed time in seconds will be shown in the message window as you record 6 Press PLAY STOP P M when you ve finished recording The system will play back your recorded message then save it Base ringer 1 Press SETUP five times the system announces Base ringer To change the setting press CHANGE 2 Press CHANGE 3 Press CHANGE again until the desired base ringer sounds 4 Press SETUP to save your selection and advance to the next setup option or press PLAY STOP P E to save and exit Toll saver This function sets the number of rings before the answering system picks up the call With the toll saver setting activated the answering system alerts you wh
42. sary e fthereisa duplicated number in directory the display will show ALREADY SAVED to enter the number you wish to store in the directory Press the MUTE REMOVE key to backspace and make corrections Press SEL W o o Le e Lo 1 o ES fe 3 You ll hear a confirmation tone and the new directory entry will briefly be displayed e If the directory is full the handset will display LIST FULL www vtechphones com 17 f you wish to Directory Characters by number Pressing any particular key causes different characters to be displayed in the following order store a number from redial Characters by number of key presses xe sets T Ts tet 7p eral REDIAL PAUSE ia Ex qo eae H LE J j coat L2 5 5 L8 E2 s E991 _ Ribot orn ias DbjEJFrFyjs adeyj t memory Press L 18 www vtechphones com Directory Review dial from the directory Press MENU with DIRECTORY is displayed press SEL With REVIEW in the first line press SEL OR With the handset in idle press A to enter the directory review mode The first directory entry will be displayed e Scroll through the directory entries using A and Y or enter the first character of the name to be searched using the digit keys Continue navigating using the A or W scroll keys until you reach the entry to be dialed e Press 4 or SPEAKER to dial the number Edit a dir
43. sign VTech will return repaired or replacement products to you in working condition VTech will retain defective parts modules or equipment Repair or replacement of Product at VTech s option is your exclusive remedy You should expect the repair or replacement to take approximately 30 days How long is the limited warranty period The limited warranty period for the product extends for ONE 1 YEAR from the date of purchase if we repair or replace a Materially Defective Product under the terms of this limited warranty This limited warranty also applies to repaired or replacement Products for a period of either a 90 days from the date the repaired or replacement Product is shipped to you or b the time remaining on the original one year warranty whichever is longer What is not covered by this limited warranty This limited warranty does not cover 1 Product that has been subjected to misuse accident shipping or other physical damage improper installation abnormal operation or handling neglect inundation fire water or other liquid intrusion or Product that has been damaged due to repair alteration or modification by anyone other than an authorized service representative of VTech or 2 3 Productto the extent that the problem experienced is caused by signal conditions network reliability or cable or antenna systems or 4 Productto the extent that the problem is caused by use with non VTech electrical accessories or www vtechpho
44. ss commands if tones produced by the telephone are too short Hold the buttons down longer if this occurs 35 Ww o o i Le Lo 1 o ES Q 3 n some areas tone dial phone from a remote location phone may not function due to telephone line conditions such as line noise echo etc 36 Answering system operation Message alert The message alert function produces an audio tone to remind you that there are new messages on the answering system 1 Press SETUP three times and you will hear Message alert To change the setting press CHANGE 2 Press CHANGE to confirm the current status on or off is also displayed on the message window 3 Press CHANGE again to change the setting 4 Press SETUP to save and advance to the next menu option or press PLAY STOP P M to save and exit When the message alert function is on the base unit beeps every 10 seconds PLAY STOP P M and the number of messages in the message window flash when there are new messages PLAY STOP gt and the number in the message window are on steadily to indicate there are no new messages Announcement only mode In announcement only mode callers hear an announcement but cannot leave messages When announcement only is turned on calls are answered with the pre recorded announcement We re sorry Messages to this number cannot be accepted Tum the announcement only mode off or on Press SETUP four time
45. tgoing announcement CHARGE NUSE 1 Press MENU the system announces Announcement Press PLAY or press RECORD To continue set up press SETUP www vtechphones com You can record an announcement for up to 90 seconds Announcements shorter than 3 seconds will not be recorded 29 W o o 2 Le Lo 1 o ES ce 3 30 Answering system operation 2 Press REC MEMO After you hear Record after the tone Press STOP when you are done speak toward the MIC on the base to record an announcement for up to 90 seconds 3 The elapsed time in seconds is shown in the message window when recording 4 Press PLAY STOP D lll when you have finished recording The system will play back your recorded message and then save it Listen to outgoing announcement 1 Press SETUP 2 Press PLAY STOP KR Delete outgoing announcement DELETE G9 GHz 5 8 diem SPREAD SPECTRUM y L rl A 1 Press SETUP 2 Press PLAY STOP P M to begin playback 3 During playback press DELETE X if you wish to delete your announcement 4 The system will confirm deletion with the prompt Announcement deleted When your announcement is deleted calls will be answered with the programmed announcement Hello Please leave a message after the tone www vtechphones com Answering system operation Message playback Press PLAY STOP to listen to
46. then press TALK to answer the call If you move out of range during a phone conversation you might hear noise or interference To improve reception move closer to the base If you move out of range without pressing OFF the phone will be left off the hook To hang up properly walk back into range periodically pressing OFF www vtechphones com Batteries Battery care and performance After the battery is fully charged you can expect the following performance If you repeatedly Operation Operating time get a low battery m indicator even While in use talking up to 7 hours after charging While not in use standby up to 3 days overnight the battery should be Handset is off the base unit or charger but not in use replaced The battery needs charging when To reduce the Anew battery is installed in the handset risk of fire or D The phone beeps twice every five seconds injury to persons 0 The screen displays LOW BATTERY and the low battery icon ME un x Place the handset in the base so the CHARGE light turns on The battery is usually full K charged in about 16 hours dnn S 3 You can keep the battery fully charged by returning the handset to the base or charger after each use carefully D Charge the E He place the handset battery battery provided 2 Remove the battery compartment cover on the handset by pressing a on the indentation and sliding the cover downward
47. ts base or charger when not in use to ensure optimum performance CAUTION To reduce the risk of fire or injury read and follow these instructions 1 Use only the battery supplied or equivalent 2 Do not open or mutilate the battery Released electrolyte is corrosive and may cause damage to the eyes or skin lt may be toxic if swallowed 3 Exercise care in handling battery in order not to short the battery with conducting materials such as rings bracelets and keys The battery or conductor may overheat and cause burns Q 1 m 2 ke 7 e E m D Q Installation Connect power to base unit chargers 1 Plug the power adapter into an electrical outlet not controlled by a wall switch and the connector into the bottom of the base unit Connect the power and telephone line cords to the 2 Choose the location for your charger and plug its power supply into an electrical underside of the outlet base as illustrated Plug the AC adaptor into an electrical outlet If the battery has not been charged place the handset in the base or charger and allow it to charge for at least 16 hours Caution Use only the VTech power supply provided with your phone To power outlet To telephone outlet Conn
48. ty under the following conditions When the power supply cord or plug is damaged or frayed If liquid has been spilled onto the product If the product has been exposed to rain or water If the product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and often requires extensive work by an authorized technician to restore the product to normal operation E If the product has been dropped and the base and or handset has been damaged F If the product exhibits a distinct change in performance Avoid using a telephone other than cordless during an electrical storm There is a remote risk of electric shock from lightning Do not use the telephone to report a gas leak in the vicinity of the leak Only put the handset of your telephone next to your ear when it is in normal talk vom SAVE THESE INSTRUCTIONS www vtechphones com 51 gt Q Z p gt e S h o e gt FCC ACTA and IC regulations FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission FCC rules These requirements are intended to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequenc
49. uoneunuojur jeuonippv Troubleshooting Problem Suggestion Common cure for If the unit does not seem to be responding normally then try putting the handset in its base If it electronic equipment does not seem to respond do the following in the order listed 1 Disconnect the power to the base Disconnect the handset battery and spare battery if applicable Wait a few minutes Connect power to the base Re install the battery ies Wait for the handset to re establish its link with the base To be safe allow up to one minute for this to take place 48 www vtechphones com Maintenance Taking care of your telephone Your cordless telephone contains sophisticated electronic parts so it must be treated with care Avoid rough treatment Place the handset down gently Save the original packing materials to protect your telephone if you ever need to ship it Avoid water Your telephone can be damaged if it gets wet Do not use the handset outdoors in the rain or handle it with wet hands Do not install your base unit near a sink bathtub or shower Electrical storms Electrical storms can sometimes cause power surges harmful to electronic equipment For your own safety use caution when using electric appliances during storms Cleaning your telephone Your telephone has a durable plastic casing that should retain its luster for many years Clean it only with a soft cloth slightly dampened with water or a mild soap Do
50. urther instruction If you subscribe to DSL If you hear noise during conversations and or your caller ID features aren t functioning properly service install a noise filter to the telephone line between the base unit and the telephone line jack Contact your DSL provider to obtain a noise filter get noise static Other electronic products can cause interference with your cordless phone Try installing or weak signal even your phone as far away from these types of electronic devices as possible wireless routers when I m near the radios radio towers pager towers cell phones intercoms room monitors televisions personal base computers kitchen appliances and other cordless phones Microwaves operate on the same frequency as your phone It is normal to experience static on your phone while the microwave is running Do not install this phone in the same outlet or near the microwave If your phone is plugged in with a modem or surge protector plug the phone or modem surge protector into a different location If this solves the problem re locate your phone or modem farther apart from one another or use a different surge protector Relocate your phone to a higher location The phone will likely get better reception not installed in a low area If the other phones in your home are having the issue the problem is in your wiring or local service Contact your local telephone company charges may apply 44 www vtechphones com Troub
51. vtech User s Manual www vtechphones com Innovation Beyond Technology Model 6765 58 DIGITAL Table of contents Getting started eee ees 4 Parie ehel lt caca 29 ala Roe EE HR 4 Installation lt cc YT Romx TR 5 Choose a location 2054 44 nm xk 5 Install handset battery 5 Connect power to base unit chargers 6 Check battery indicator 7 Check for dialtone 7 If you subscribe to DSLservice 8 Belticlipi iio oo ok m om m Ry m n PE a 8 Wallmounting 55x59 Rm n 9 Handsetlayout seora atso aa llle 10 Base unit lay t o ve 5o mx preta 11 Basicoperation rns 12 Handseticons e 3 soo o o m oom n 12 Handset LEDS o re see o o m 12 Base LEDS ss oo oom eo m o n p o gn 12 Handsetoperation o E 13 Makingcalls s e 2559 om 13 Answeringcalls lr 13 Adjust handset volume ss 13 Flash function e 43 ee o mx 13 Redial e 2 ase ve wise Saw ec gms pm ex 13 01T coo a Hk A ed oe OE E POR 14 INECO s i eH SR o a ar ee Soy 14 Gall forward ox omo cm ae c ee ys 15 Gall transfer aco ow Rp mese mum a os 16 Conference call 16 Findhandset lt E wae eee es om m 16 Directory lt seis ee A ee 17 Storeanewentry R a 17 Characters by number ills 18 Review dial from the directory 19 Edita directory entry s
52. y energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment To ensure safety of users the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product This product has been tested and found to comply with the FCC criteria The handset may be safely held against the ear of the user The base unit shall be installed and used such that parts of the user s body other than the hands are maintained at a distance of approximately 20 cm 8 inches or more If you choose to use a clipping device please make sure to only
53. your telephone line ensure the connection of this equipment does not disable your alarm equipment If you have questions about what will disable alarm equipment consult your telephone company or a qualified installer If this equipment is malfunctioning it must be unplugged from the modular jack until the problem has been corrected Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents For repair procedures follow the instructions outlined under the Limited Warranty If this equipment is causing harm to the telephone network the telephone company may temporarily discontinue your telephone service The telephone company is required to notify you before interrupting service If advance notice is not practical you will be notified as soon as possible You will be given the opportunity to correct the problem and the telephone company is required to inform you of your right to file a complaint with the FCC Your telephone company may make changes in its facilities equipment operation or procedures that could affect the proper functioning of this product The telephone company is required to notify you if such changes are planned If this product is equipped with a corded or cordless handset it is hearing aid compatible If this product has memory dialing locations you may choose to store emergency telephone numbers e g police fire medical in these locations If you do store or test emergency numbers ple

User`s Manual - VTech Canada

Contents

Download Pdf Manuals

Related Search

Related Contents