Laura Ashley PXX133 Use and Care Manual
Contents
1. Assembly Instructions Betsy Pendant PXX133 WARNING BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE NOTE 1 Before installing consult local electrical codes for wiring and grounding requirements 2 READ AND SAVE THIS INSTRUCTION 1 Attach the nipple to the mounting strap then secure it with a washer and hex nut 2 Attach the mounting strap to the outlet box by using two mounting screws 3 Secure the loop onto the stem 4 Choose the length of the chain you need then weave the fixture wire and the fixture grounding wire through the chain Then connect one end of the chain with the Note Spare glass drops are enclosed in hardware Pearl Strand 6 Sets Outlet Box loop by using the loop lock gH House Grounding Wire 5 Secure the top loop to the nipple tightly lt ei gt Wire Nut 6 Thread the fixture wire and fixture grounding wire Sg Pa ye through the collar canopy top loop nipple and p Mounting Strap Green Grounding Screw mounting strap j a Mounting Screw 7 Connect the other end of the chain with the top loop 0 Nipple by using the loop lock 8 Pull out the outlet wires and house grounding wire I Canopy from the outlet box Make wire connections with wire T Top Loop nuts gt Collar The smooth wire marked from the fixture to the l Loop Lock Fixture Groundi2. ng black wire from the power source Wire The ridged wire unmarked from the fixture to the Chain white wire from the power source IF Loop Lock Aitach the fixture grounding wire to the mounting Fixture Wire strap with the green grounding screw Then connect A ae it to the house grounding wire with the wire nut o a G m Carefully put the wires back into the outlet box iS N S Fixture Bulb Type B Max 60W not included ocket Set Rod 9 Attach the canopy to the mounting strap by inserting the top loop then secure it with the collar 10 Install bulbs not included See relamping label at socket area or packaging for maximum allowed wattage 11 Secure the leaf sets onto the rods of the fixture 12 Install the glass drops glass balls and pearl strands as shown in diagram Note To replace broken glass drops Open the pins to remove the glass drops hook the new glass drops and then close back pins Avoid bending the pins into sharp angle 13 Turn on the power at the main fuse or circuit breaker box Leaf Set 12 Sets
Download Pdf Manuals
Related Search