HOT Watch User Manual
Contents
1. 90 seconds it is updated every minute or when the screen is touched 13 5 Bluetooth Menu Bluetooth related functions and Find phone features are provided in this menu e New Phone This makes the watch discoverable to the phone for about a minute The watch should be seen as HotWatch XXXXXX in the phone Bluetooth scan e Paired Phones When multiple phones are paired to the watch the phones can be switched using this menu The screen displays the paired phones max of 4 The paired phone is highlighted Tapping any of the phones from the screen will disconnect the current phone and connect to a new phone e Bluetooth On Off Bluetooth can be switched On or Off from this menu With Bluetooth Off the watch conserves energy and lasts much longer e Find Phone Beeps the connected phone Tapping Find Phone again will stop the beep The beep also can be stopped from the phone Find phone feature works only with HOTWatch application running e Bluetooth goes into Sleep mode when there is no motion for 30 minutes It wakes up with motion or touch 13 6 Settings The settings menu is divided into three screens Settings1 e Energy Saver Normal Settings 07 29P Explained under Energy Optimization section Energy Saver Gesture Call e Gesture Call All Off Font Tall Call gestures include Answering Rejecting and Ending call They are nz i yare About BT Add enabled during the call Default All gestures include Call gestures and2. Switch speaker mode Hands On or Speaker mode Mic Mute and End call The call screens are locked during the call until the call is ended Tapping the icons or power key will not change the screen e Answer call Hands On or Speaker mode button Settings 3 10 02P iPhone BLEW PhBookDnload RestartBl FactoryReset e Mute button stops vibration on watch and mutes the phone ringer only in Android e Reject call button PHTL I BS Vol 10 CallProgress 10 07P Call in 10 06P Q K G9 FCC Statement This device complies with Part 15 of the FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation Any change or modification not expressly approved by PH Technical Labs may void the users authority to operate the equipment This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particul
3. also displays o Phone book download status o Indicates Bluetooth Off when watch is in idle state e Analog1 Simple analog clock with phone signal level and watch battery level indication This has second hand needle This screen also displays o Phone book download status o Indicates Bluetooth Off when watch is in idle state e Digital2 Hours in digital format and Minutes in analog format e Digital3 Seven segment style fonts with digital display e Analog2 Clock with textured background This has seconds needle e Digital4 Dual city clock Sun and moon are displayed based on the time of day 6AM 6PM or night 6PM to 6AM The second city is customizable from the HOTWatch application under second city information Icon 2 displays the recent six notifications Long touch for about 2 seconds on any of the notification will take the user to the actual notification screen with scroll and reply options Icon 3 has selectable information apps The 6 screens in this section can have 1 2 or 3 windows Each window can have an information app configured from a list of selectable apps The configuration is done in the connected smart phone by selecting the information app into a particular screen window The information screens are static screens that are refreshed every 5 minutes every 1 minute in normal non energy saving mode with data from the paired phone In Windows phone it is refreshed once in every 30 minutes List of apps th
4. or when the screen is touched The power consumption of watch will be higher when pedometer is switched on The calories and Miles are updated every 20 stpes HOTWatch alerts the user when the user does not walk for more than 2 5 hours Voice Response Activates the voice response on the phone 4 The results of the voice response can be heard from the VoiceResn _12 09P watch s speaker It is advisable to hold the bottom of the wrist VR is On near mouth as the mic is located at the bottom Calculator A simple calculator Calendar Shows calendar events for the current day that are updated Ellis nun from the paired phone A maximum of 4 calendar events can be 6 00p HOT Wat displayed for a day The list is updated once at 6AM in the morning and updated when a new calendar event that is added User is notified at the time of the meeting Note Taker Will be implemented in the next firmware update Music Control The music player in the connected phone can be controlled from the watch Play Pause Forward Backward and Volume control are supported The song title is displayed in the title window The HOT Watch uses AVRCP of the Bluetooth for the music control The volume is controlled with the help of HOT Watch app on the phone 13 4 Clock Menu The Clock menu includes functions related to time alarm etc Alarm 1 Alarm can be set once or daily To set time for alarm tap the eed ene ese hour button and then tap the circu
5. profile Once the BLE GATT ANCS is connected these notifications are sent from the iOS to the watch even when HOTWatch appis not running To connect BLE bring the HOTWatch app to foreground The app will connect the BLE with watch Accept BLE pair request from the HOTWatch Application BLE is supported in iPhone 4S or above with iOS 7 or above For older phone models iOS only SMS notification is supported with Bluetooth Message Access Profile MAP Select MAP on the settings iPhone menu Touching the SMS or MAP will toggle this selection To connect to MAP tap on the tick adjacent to SMS In Phone Bluetooth menu navigate to the connected device info and enable Show Notifications The notification size limit is 90 characters for iPhone due to BLE limitation 11 Time and Information Screens The user screens are divided into 4 main screens Time Notifications information Apps and custom Apps and Advanced Function Screens The Time and Information screens are divided into 4x6 sections as shown below The 4 icons represent 4 columns that have analog and digital watch faces notification screens information and custom apps Within each column there can be up to 6 screens with different watch faces or custom apps ICON1 Analog and Digital watch faces ICON2 ICON3 Recent Information Notifications screens ICON4 Custom Apps 1 ri 1 FBook ap 02 13 Nina Phil Today is Nina O m Phtl s 32 birthday SAT SUN 88
6. 45 96 33 Screen 1 LJ Ball Batt 01 10P ri ee a HM Scored y 2 WhatsApp 01 34P O 92 i F 42 SAT SUN m ven 88 45 96 33 12 MAY Customizable app screen 2 7 Se S RR EEK s LJ m nn um 3 Hike 01 35P LJ ri 4 viber 01 41P MONDAY EEE N EEE 6 Email 01 45P 5 Mails FRIDAY 14 ri Meeting 02 15P No Meetings For Today LJ ri Hm m Hu HB FbookTwit 02 17P PHTL No FB Message HOT No Twitter Me LJ ri Info6 02 18P MSFT NA AAPL NA GOOG NA LJ m NativeApp 02 22P App3 NOT LOADED LJ m Gi um a om NativeApp 02 24P App4 NOT LOADED LJ ri m Bm a un NativeApp 02 24P App5 NOT LOADED x X X 0 Default App The icons in Sections 1 are pre loaded with watch faces that are optimized to be energy efficient Six Watch faces are available in Section 1 The watch faces have a Time and Date display The seconds hand or seconds in digital display is Off by default Touching the screen for more than two seconds will switch the second needle On for 90 seconds supported only on 1 2 and 5 watchface The watch faces can be replaced with custom watch faces from third party vendors Digitall Digital display using various font sizes and 12 24 hour format with phone signal level and watch battery level indication Tapping on 12 toggles between the two formats This watch face displays seconds for long touch This screen
7. HOT Watch User Manual The watch will be shipped in power off state 1 Getting Started For best user experience download the HOT Watch app from the iTunes iPhone or Google Play Android phone or Windows store Windows phone Install the app on your phone before you turn the watch On 2 Turning On and Off To turn on the HOT Watch press and release the power key If it does not turn On the battery may be drained Connect the watch to the charger and the watch should work The watch comes with a magnetic USB charger that pairs to the audio module of the watch Please do not leave the magnetic end of the charger near metal surface when USB end of the cable is plugged in It can create short to the USB lines While we provide teeth to prevent short angled metal surfaces can still create short To turn Off the HOT Watch when the display is active press and hold down the power key for 5 seconds 3 Power Key Press and hold for 6 seconds Turn Off Press once when off Turn On Backlight on Press twice Touch Calibration Required when there is an undesirable touch experience 8 so that phone can connect to the watch On the phone Bluetooth menu scan for Bluetooth devices and select HOT Watch XXXXXX to connect to watch Once the watch is paired to phone it will connect phone audio HFP The next time watch and phone are nearby the watch automatically connects to paired phone When watch is powered on it start
8. Midnight 12AM HOTWatch connections are cleaned up 8 Audio Switching b w Phone and Watch during Call When making or receiving a call from the watch the call stays on the watch It can be transferred to the phone by tapping on the headset button on the phone When making a call from the phone the default behavior of the phone is to push the call to a Bluetooth device HOT Watch in this case but the watch pushes the call back to phone as user is not using watch to dial out This is done to ensure that the call will stay on the phone when the call is made from or received from the phone However some Android phones do not work well with this call pushback They tend to push the call back to watch This can cause automatic call switch to watch during a normal phone call To overcome this problem a special setting EnbleBtOff is provided on the watch s Settings screen to switch off the Bluetooth only call audio HFP when a call is made from the phone The HFP is enabled again when the call is made from the watch or when a new call comes in Make this setting On to prevent call switching 9 Bluetooth Icons The HOT Smart Watch uses a dual mode Bluetooth device with Bluetooth Classic 2 1 and Bluetooth Low Energy BLE 4 0 in one device The Classic Bluetooth is used for call audio data connection phone book access and music control BLE is used for data connection on the supported iOS phones available only with iPhone 4S iOS 7 and a
9. ar installation Industry Canada Statement This device complies with RSS 210 of Industry Canada Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device This Class B digital apparatus complies with Canadian ICES 003
10. at can be added in Section 2 are e Stock 1 e Stock 2 e Stock 3 e Stock 4 e Weather e Second city time e Fitness app pedometer e calendar e Facebook e Twitter e Email e SMS e News e Cortana only for Windows When the SMS Facebook Twitter Email fitness or calendar screen is touched for more than 2 seconds the advanced screen for that particular application will be opened with scrolling and reply options Icon 4 has the Main Menu Unlock screen as the first screen It has place holder for 4 more custom SDK developed apps On the 6 screen it has a pre loaded app Tic Tac Toe 12 Advanced Function Screens The advanced function screens provide access to call multi messaging and other useful applications These screens can be accessed using the shortcuts Writing U on screen unlocks the screen and takes the user to Main menu Other shortcuts opens different screens and apps Below is a list of touch shortcuts Character Screen or Final App Unlock Main menu screen D without Dial Main screen vertical line A without Apps main screen horizontal line Clock main screen SMS and other messaging apps Diagonal slide Music control screen from top right to bottom left Diagonal from Voice response bottom left to top right B without Bluetooth main screen vertical line Diagonal from Go to main watch faces screen top left to bottom If already in watch face screen activates the LCD
11. bove The table below lists the Bluetooth profiles supported by the watch Bluetooth Profile Funetion o gt Serial Profile SPP Data connection with Android and Windows app Data connection with iPhone Message Access Profile MAP SMS messaging in iPhone 4 and above Bluetooth Low Energy BLE GATT Global notifications in iPhone main Signal eve Data Serial Profile SPP icon when HFP Ca or IAP Connected Audio connected Battery Level FRI 06 Jun When HFP is connected connected Phone s signal level is displayed The Signal level and the battery level are updated every 5 minutes If any profile is disconnected touching this icon will try to re connect to that profile If the re connection fails the second touch will reset the Bluetooth with fresh reconnection attempt BattLow is displayed when battery level is at a critical stage Bluetooth is turned Off at this level 10 Notifications HOTWatch supports SMS Email Facebook Twitter and other notifications In Android phone the HOTWatch Application forwards phone notifications to watch By default Email Facebook Twitter WhatsApp and WeChat apps are enabled The user can go to Settings and enable other apps for global notifications The notification size limit is 380 characters for Android The user can respond to SMS notifications from the watch In iPhone the HOTWatch receives notifications via Bluetooth Low Energy BLE with GATT ANCS
12. color right Reverse L or L Backlight bottom right to top left Reverse Diagonal Flashlight on Curve model only Note taker For Future Locks the watch face and it will not move by touching it accidentally Writing U on the screen will unlock it from this locked state Writing a second U will take you to the unlock screen The chart below illustrates the advanced function screen flow The advanced screens starts with the main unlock screen and branches into the phone SMS amp Messaging Apps Clock Time Bluetooth and Settings screens Settings 01 38P Energy Saver Rn Gesture Call Font Tall About BT Add To navigate between the screens you must tap the icons Tapping any icon on the unlock screen takes you to second level icons The second level screen also includes a sub icon displaying which group the screen belongs to Touching this sub icon takes you back to main unlock screen 12 1 Phone Menu The Phone Menu has Recents Favorites Phone Contacts and Dial pad For Recents and Contacts to be functional the phone book access profile PBAP has to be connected to a phone via Bluetooth Grant Permission to access Phone book while pairing the watch If not the Recents and Contacts feature will not be available Any issues with PBAP can be resolved by un pairing and re paring the watch and phone Recents Favorites and Contacts list cab be scrolled by sliding the finger up or down on the screen Tappi
13. gesture for Favorite numbers Backlight and VR Off disables all gestures e Font Tall Med Tall Large font Default Med Normal size font e About BT Add Displays the software version and Bluetooth name Settings2 e EnableBtOff Off On Disconnects Call Audio Bluetooth HFP when a call is made from ESUS EE phone For some Android devices where audio keeps switching this EnbleBtOff Off feature can be used PhoneLost Off Vibrate Soft Hand Left e PhoneLost Off On On will notify the user when phone is out of Bluetooth range Vibrate Soft Norm Off Vibration can be set to soft normal or turned off for all indications Hand Left Right The watch can be worn on the right hand or left hand Mode can be set here In right hand mode the screen display is flipped so that user can wear the watch on right hand with audio facing the palm Right hand mode is not optimized for energy efficiency Settings 3 iPhone BLE SMS Enables BLE or SMS MAP for iPhone notifications PhBookDnLoad Downloads phone book from the phone The phonebook is downloaded with every new Bluetooth connection This option can be used to manually download again RestartBT Resets Bluetooth and un pairs all paired phones FactoryReset Clears the phone book Resets and un pairs all Bluetooth connections Changes all the settings to factory default 13 7 Call Screens The incoming call screen includes Call in progress screen includes
14. mference dial area to select the hour 10 2 Repeat the procedure for minute Tap Once or Daily Tap AM PM to 2 00 select AM or PM The alarm can be turned On or Off Tap the Set key to Once AM set the alarm The On Off changes to Set when time is changed Off Alarm 2 Second Alarm Similar to Alarm1 Two alarms can be active at FssestenucSen any given time e Set Time Time can be set here Tap the Hour area and slide finger up EEylulkirzpikn down select the hour Repeat the same to set the Minute Day Month Year AM PM can be toggled by a tap To set the time and date tap and hold set for a few seconds When the HOT Watch app on phone is 09 JUN 14 connected the time is synced with the phone and overrides the set time e Calendar A simple calendar that displays current previous and next week dates of the current month e Stop Watch A simple stop watch to display time elapsed in seconds minutes and hours Tap Start to start the timer Reset will restart the 00 00 00 counter The counts are updated live for 90 seconds After 90 seconds it runs in the background and is updated every minute or when the screen is touched e Countdown Timer Set the time in Hours Minutes and Seconds to start the timer Tap each segment and slide up or down to change the hour minute or seconds Tapping start will start the countdown Watch vibrates at the end of countdown The display is updated live for 90 seconds After
15. ng a name and the number in the Contacts list dials out a call e Recents The list of recently dialed numbers is displayed There may be a lag in ty the display of the recent list depending on the transfer speed from the phone Vs to the watch e Favorites Displays the list of favorite phone numbers from ro the paired phone In Android paired phone the Favorite na Lose name numbers are downloaded automatically by the PHTL Office Patsy Lundin HOTWatch application on the phone On the iPhone or Windows app the favorite phone contacts have to be gt selected in the HOTWatch application Carol Gibson Mark Tepper e Contacts Contacts are downloaded maximum of 768 contacts from the paired phone at the first pairing after 20 seconds delay of the phone to the watch The contacts are displayed in the alphabetical order on the screen Tapping A l any letter on the list displays the contacts starting with the Charlie Rose selected letter Further search can be done by sliding the David Ross finger up or down Once the name is found and selected Edward Glove the phone number can be dialed out e Dial pad After dialing the number touch the numbers dialed to start the call Like in the picture below touch 2145042263 13 2 SMS amp Messaging Menu The SMS and messaging menu includes SMS Email Facebook Twitter and Global WhatsApp Skype etc notifications A short SMS reply can also be sent from the watch on
16. s in Bluetooth discoverable mode If the watch Bluetooth is not in discoverable mode you can make it discoverable with below steps Goto Unlock menu with shortcut icon 4 touch or U touch gesture Select Bluetooth icon Select New The watch will make Bluetooth discoverable and will display Bluetooth id of the watch Waiting HEW PAIRED Please connect to HOTWatch from Phone Run the HOT Watch app in the Android or iPhone or Windows phone The app opens the Bluetooth data connection SPP 4 Hands On Call Usage The Hands on Call feature is a unique feature which provides a private call experience It is achieved by using a directional speaker located at the bottom of the wrist The speaker projects the sound from the watch strap when the user s palm is held to his her ear The palm redirects the sound to the ear Follow the below steps to get the best audio experience A Wear the watch on your wrist close to your palm So that the speaker is closer to palm B Cusp the palm over the ear Make sure that bottom of your palm is not touching the ear otherwise the sound will be blocked C Adjust the volume scale of 1 15 if required The default volume level for Hands On is 5 and Hands Free is 13 for the call default can be changed from the HOT Watch app in the phone Adjust the volume to the minimum required for audibility and for a better private call experience D Volume can be further adjusted during call with b
17. supported phones HOTWatch displays the last message received in the phone Longer text can be read by scrolling the screen vertically Scroll bar is displayed for messages longer than a screen e SMS Shows last SMS message from the phone The user can reply to PHTL HOT Watch simulator released Auto Reply the SMS Android or Windows only using the T9 style keypad or send a Voice Response pre stored message to the sender Auto Reply Voice Response can also be used to send a reply to message When iPhone is connected to watch you will not see the reply options in the SMS screen e Email Shows last Email message from the phone The subject sender and message text are displayed PHTL HOT Watch HOT Watch comes with Gorilla glass e Facebook Displays last notification from Facebook e Twitter Shows last tweet from Twitter HOT Twitter reply options are not supported in current version Pre order your e Global All other notifications such as Whatsapp WeChat etc are grouped under Global notifications 13 3 Apps The HOT Watch comes loaded with many useful apps LJ ri e Fitness Pedometer Shows the steps walked distance travelled and ae Od Steps Walk Time calories burned Turn on the pedometer to start counting the steps The steps are updated live for 90 seconds after activating this screen After 90 seconds the steps are counted in the background and updated every minute
18. uttons on the screen The watch automatically adjusts volume in noisy environments using auto gain 5 Energy Optimization The HOT Watch is designed for maximum energy efficiency The watch default mode is energy saver mode The Energy Saver or Normal mode can be selected in the Settings screens Below are the differences between the Energy Saver and Normal mode Function Energy Saver Mode Normal Mode Frequency of information updated from the 5 minutes 1 minute phone app Backlight during notification Short Long Tactile vibration when icons are tapped Bluetooth turns Off when watch is not worn After 30 minutes Always On 6 Gestures The HOT Watch detects hand gestures using a 6 axis accelerometer and gyroscope The gyroscope is switched Off by default to save battery power It is switched On during a call or whenever required The gestures are categorized into call and non call gestures The call gestures are activated during a phone call ringing dial out call in progress etc Gesture Gesture Detail call ear similar to waving bye bye Mute call During an incoming call Twist your wrist 3 times End call Bye Bye or To end the call twist your wrist thrice or do bye bye gesture Twist Non call gestures are used to get Recents Favourites and Voice response Non call gestures are initiated by twisting the wrist two times The non call gestures are described below The non call gestures are switched Off b
19. y default They can be enabled in settings menu by selecting All option for Gesture Feature Action Gesture Detail LED Backlight Horizontal Twist your wrist twice Move hand to the horizontal watch watch reading reading position for one second Voice Watch reading Twist your hand twice and move the hand to the horizontal Response watch reading position for one second After the backlight is tap two times On tap the hand from top to bottom for two times Favorites Raise hand to When there are no incoming calls twist your wrist twice and move the hand towards the ear The favorite phone number screen is displayed 7 Miscellaneous To make a call from the watch dial the number on the dial pad of dial out screen and touch on the dialed number to activate call There is no call button on this screen The text typing screen for SMS text reply or Facebook comment reply uses a T9 style keyboard Type the desired text using the keyboard touch the text to send out Only Android and Windows users can respond to texts using keypad iOS users can use Siri to respond to texts The charger has a magnetic connector and is attracted to steel surfaces When the charger cable is connected to a power source make sure that the magnetic side is not close to any metal surfaces While teeth are provided to prevent a short circuit on the connector the angular contact of the connector can create a short circuit in the watch At
Download Pdf Manuals
Related Search