Home

GUI Graphical User Interface: Rail Switch Power Lite (RSPL)

Contents

1. Media access control MAC bridges includes IEEE 802 1p Priority and Dynamic Multicast Filtering Virtual Bridged Local Area Networks VLAN Tagging Port Based VLANs Spanning Tree STP Rapid Spanning Tree RSTP Port Authentication Ethernet VLAN Tagging Flow Control 303 Appendix A 4 Underlying IEC Norms A 4 Underlying IEC Norms IEC 62439 High availability automation networks MRP Media Redundancy Protocol based on a ring topology RM GUI RSPL 304 Release 2 0 02 2013 Appendix A 5 Underlying ANSI Norms A 5 Underlying ANSI Norms ANSI TIA 1057 Link Layer Discovery Protocol for Media Endpoint Devices April 2006 RM GUI RSPL Release 2 0 02 2013 305 Appendix A 6 Maintenance A 6 Maintenance Hirschmann is continually working to improve and develop our software You should regularly check whether there is a new version of the software that provides you with additional benefits You will find software information and downloads on the product pages of the Hirschmann website RM GUI RSPL 306 Release 2 0 02 2013 Appendix A 7 Literature references A 7 Literature references Optische Ubertragungstechnik in industrieller Praxis Christoph Wrobel Hrsg Huthig Buch Verlag Heidelberg ISBN 3 7785 2262 0 Hirschmann Manual Basics of Industrial ETHERNET and TCP IP 280 710 834 TCP IP Illustrated Vol 1 W R Stevens Addison Wesley 1994 ISBN 0 201 63346 9 Hirschmann Installation
2. RM GUI RSPL 20 Release 2 0 02 2013 Basic Settings 1 1 System Security Status The fields in this frame show the security status and inform you about alarms that have occurred You define the parameters that the device monitors in the Diagnostics Status Configuration Security Status dialog Parameters Meaning Symbol Shows the security status Possible values The device status is OK The monitored parameters have the desired status An alarm has occurred At least one monitored parameter differs x from the desired status Alarm Start Time Shows the time at which the device triggered the alarm with the current highest priority Possible values Date and time in the format Month Day Year hh mm ss AM PM The device triggers an alarm if a monitored parameter differs from the desired status In the Diagnostics Status Configuration Security Status dialog the parameters are sorted by priority High priority at the top low priority at the bottom Alarm Reason Shows the cause of the alarm and the current highest priority Table 4 Security Status frame in the Basic Settings System dialog System Data The fields in this frame show operating data and information on the location of the device Parameters Meaning Name Defines the device name Possible values 0 255 alphanumeric characters Location Defines the location of the device Possible values 0 255 alphanumeric characters Table 5 System Data fram
3. Table 42 New Entry frame in the Security Authentication List dialog RM GUI RSPL Release 2 0 02 2013 69 Security 2 2 Authentication List Allocate Applications In this frame you specify the accesses for which the device uses the selected list For example to only use the list for accesses via the V 24 interface you assign the Console V 24 application To display the frame you click the Allocate Applications button Parameters Description Possible Applications This column contains the applications that can be allocated to the selected list Possible values Console V 24 for accessing the management via the V 24 interface SSH for accessing the management via SSH Telnet for accessing the management via Telnet Web Interface for accessing the management via the graphical user interface 8021x for accessing the network via 802 1X Note Every application can always be allocated to exactly one list It is possible that the applications in this column are already allocated to another list If you allocate an application to the list that is already allocated to another list the device removes the original allocation Dedicated This column contains the applications that are allocated to the selected Applications list Table 43 Allocate Applications frame in the Ssecurity Authentication List dialog Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permane
4. Egress On this tab you activate the rate limiter function for data packets to be sent By entering a threshold value you define the maximum amount of traffic the port transmits on the egress side If the traffic on this port exceeds the threshold value the device discards the excess traffic on this port Parameters Meaning Port Shows the number of the device port to which the table entry relates Bandwidth Defines the threshold value for data packets to be sent on this port Possible values 0 100 default setting 0 The threshold value is entered as a percentage of the data rate of the port Enter the percentage of the data rate of the port between 0 and 100 The value 0 deactivates the rate limiter function on this port Table 132 Table in the Egress tab of the switching Rate Limiter dialog Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 133 Buttons RM GUI RSPL Release 2 0 02 2013 155 Switching 5 3 Filter for MAC addresses 5 3 Filter for MAC addresses This dialog allows you to display and edit address filters for the address table forwarding database Address filters define the way the data packets are forwarded in
5. Possible values 0 00 100 00 default setting 0 00 The value 0 deactivates the upper threshold Defines the interval in seconds Possible values 1 3600 default setting 30 The value 0 deactivates the saving of the log entries in the log file Indicates the alarm status for the utilization Possible values Selected The utilization of the device port is below the value defined in the Lower Threshold field or above the value defined in the Upper Threshold field The device sends an SNMP message trap Not selected The utilization of the device port is above the value defined in the Lower Threshold field or below the value defined in the Upper Threshold field The prerequisite for sending SNMP messages traps is that the function is switched on in the Diagnostics Alarms Traps dialog and at least 1 SNMP manager is defined Table 229 Table in the Diagnostics Ports Utilization dialog RM GUI RSPL Release 2 0 02 2013 247 Diagnostics 8 3 Ports Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 230 Buttons 8 3 3 SFP This dialog allows you to look at the SFP transceivers currently connected to the
6. Possible values Selected The connection is active The device sends traffic data to this server if the preconditions named above are fulfilled Not selected The connection is inactive The device does not send any traffic data to this server Table 101 Table in the Security RADIUS Accounting Server dialog cont Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Create Adds a new table entry Delete Removes the selected table entry Help Opens the online help Table 102 Buttons RM GUI RSPL Release 2 0 02 2013 121 Security 2 6 RADIUS 2 6 4 Authentication Statistics This dialog shows information about the communication between the device and the authentication server The table shows the information for each server in a separate row To delete the statistics click Clear RADIUS Statistics inthe Security RADIUS Global dialog Table Parameters Name Address Round Trip Time Access Requests Retransmitted Access Request Packets Access Accepts Access Rejects Access Challenges Malformed Access Responses Bad Authenticators Pending Requests Timeouts Unknown Types Packets Dropped Meaning Shows the name of the server
7. 7 7 Network Control Data for network management and redundancy mechanisms Table 172 Default assignment of the VLAN priority to the traffic classes cont Note Network management protocols and redundancy mechanisms use the highest traffic class Therefore select another traffic class for application data Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 173 Buttons RM GUI RSPL 194 Release 2 0 02 2013 QoS Priority 6 4 IP DSCP Mapping 6 4 IP DSCP Mapping The device allows you send IP data packets according to the DSCP value contained in the data packet with a higher or lower priority In this dialog you assign the DSCP values to the traffic classes The traffic classes are assigned to the priority queues of the device ports Table To change the settings click the desired row of the Traffic class column and modify the value Parameters Meaning DSCP Value Shows the DSCP value of received IP data packets Traffic Class Defines the traffic class Possible values OFA The traffic classes are assigned to the priority queues of the device ports Traffic class 7 queue with the highest priority Traffic class 0 queue with
8. Delete 1 4 Load Save Meaning Encrypts configuration profiles and uses a password to make unauthorized access more difficult O Enter the new password in the Set Password dialog O When you are changing an existing password you also enter the existing password O Select the Save Configuration afterwards checkbox to use encryption for the Selected configuration profile in the non volatile memory NVM and in the external memory ENV Note Only use this function if a maximum of 1 configuration profile is stored in the non volatile memory NvM of the device Before creating additional configuration profiles decide for or against permanently activated configuration encryption in the device Save additional configuration profiles either unencrypted or encrypted with the same password If you are replacing a device with an encrypted configuration profile e g due to a defect you proceed as follows Restart the new device and assign the IP parameters Open the Basic Settings Load Save dialog on the new device Encrypt the configuration profile in the new device see above Enter the same password you used in the existing device Install the external memory from the existing device in the new device Restart the new device When it is restarted the device loads the configuration profile with the settings of the existing device from the external memory ENVM The device copies the settings into the volatile memory
9. Possible values Selected default setting Advanced mode switched on MRP capable Hirschmann devices support this mode Not selected Advanced mode switched off Select this setting if another device in the ring does not support this mode Defines the max delay time in milliseconds for the reconfiguration of the ring This setting is only effective if the device is working as a ring manager Possible values 500ms 200ms default setting Shorter delay times make greater demands on the response time of every individual device in the ring Only use values lower than 500ms if the other devices in the ring also support this shorter delay time Defines the ID of the VLAN to which the MRP Ring configuration is assigned Possible values 0 default setting The MRP Ring configuration is not assigned to any VLAN Define the following settings for the ring ports VLAN ID 1 For this VLAN ID you assign the port the value U in the Switching VLAN Static dialog 1 4042 The MRP Ring configuration is assigned to a VLAN Define the same VLAN ID for all the devices in the ring Define the following settings for the ring ports VLAN ID as defined here For this VLAN ID you assign the port the value T in the Switching VLAN Static dialog Table 181 Configuration frame in the Redundancy MRP dialog 202 RM GUI RSPL Release 2 0 02 2013 Redundancy 7 1 MRP Information Parameters Meaning Information Shows
10. Possible values Selected The device detects ingress data packets with the TCP flags FIN URG and PUSH set simultaneously and TCP sequence number reset to 0 and discards these Not selected default setting The Xmas scan is deactivated Activate SYN FIN Activates or deactivates the SYN FIN scan Filter Possible values Selected The device detects ingress data packets with the TCP flags SYN and FIN set simultaneously and discards these Not selected default setting The SYN FIN scan is deactivated Activate TCP Offset Activates or deactivates the TCP offset scan Protection f Possible values Selected The device detects ingress TCP packets having Fragment Offset field of IP header equal 1 and discards these The device accepts UDP and ICMP packets having Fragment Offset field of IP header equal 1 Not selected default setting The TCP offset scan is deactivated Activate TCP SYN Activates or deactivates the TCP SYN scan Protection f Possible values Selected The device detects ingress data packets with the TCP SYN flag set and L4 source port lt 1024 and discards these Not selected default setting The TCP SYN scan is deactivated Table 125 TCP UDP frame in the Network Security DoS Global dialog RM GUI RSPL Release 2 0 02 2013 145 Network Security 4 1 DoS Parameter Activate L4 Port Protection Activate Minimal Header Filter Meaning Activates or deactivates the L4 port scan Possib
11. Save Opens the Save dialog The dialog allows you to save the log file in HTML format on your PC Help Opens the online help Table 193 Buttons RM GUI RSPL 220 Release 2 0 02 2013 Diagnostics 8 1 System 8 1 2 Configuration Check The device enables you to compare the device configuration with those of its neighboring devices For this purpose the device uses the information that it received from its neighboring devices via topology recognition LLDP The dialog lists the deviations detected which affect the performance of the communication between the device and the recognized neighboring devices You update the content of the table via the Load button If the table remains empty the configuration check was successful and the device configuration is compatible with the device configuration in the detected neighboring devices Summary Parameters Meaning Number of Errors Shows the number of errors that the device detected during the configuration check Number of Warnings Shows the number of warnings that the device detected during the configuration check Amount of Information Shows the amount of information that the device detected during the configuration check Table 194 Summary frame in the Diagnostics System Configuration Check dialog You will also find this information in the status bar above the menu Table When you select a row in the table the device displays additional information in the area
12. The value no Port means No destination port Table 248 Destination Port frame in the Diagnostics Ports Port Mirroring dialog RM GUI RSPL Release 2 0 02 2013 261 Diagnostics Table Parameters Source Port Enabled Type 8 3 Ports Meaning Number of the device port to which the table entry relates Possible values lt Port number gt Enables disables the copying of the data packets from this device port to the destination port Possible values Not selected default setting The copying of the data packets is disabled Selected The copying of the data packets is enabled The port is specified as a source port Disabled It is not possible to copy the data packets for this port Possible causes The port is specified as a destination port The port is a logical port not a physical port Specifies which data packets the device copies to the destination port Possible values none default setting No data packets tx Data packets that the source port transmits rx Data packets that the source port receives txrx Data packets that the source port transmits and receives Table 249 Table in the Diagnostics Ports Port Mirroring dialog Buttons Button Set Reload Reset Config Help Table 250 Buttons 262 Meaning Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click
13. user manual Hirschmann Basic Configuration user manual Hirschmann Redundancy Configuration user manual Hirschmann Routing Configuration user manual Hirschmann GUI Graphical User Interface reference manual Hirschmann Command Line Interface reference manual Hirschmann User Guide Industry Protocol Hirschmann Manual Network Management System Industrial HiVision RM GUI RSPL Release 2 0 02 2013 307 Appendix A 8 Copyright of Integrated Software A 8 Copyright of Integrated Software A 8 1 lighttpd Copyright c 2004 Jan Kneschke incremental All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution Neither the name of the incremental nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES
14. without a separator e g 001122334455 separated by spaces e g 00 11 22 33 44 55 separated by colons e g 00 11 22 33 44 55 separated by hyphens e g 00 11 22 33 44 55 separated by points e g 00 11 22 33 44 55 separated by points after every 4th character e g 0011 2233 4455 Possible Ports Defines the device ports to which the device transmits data packets with the destination MAC address 0O 0O O Select one port if the destination MAC address is a Unicast address Select one or more ports if the destination MAC address is a Multicast address Select no port to set up a discard filter The device discards data packets with the destination MAC address specified in the table entry Table 135 Create window cont Edit Entry To manually adapt the settings for a table entry click the Edit Entry button Parameters Meaning Possible Ports This column contains the ports available in the device Dedicated Ports This column contains the device ports that are assigned to the table entry E 0O O Select one port if the destination MAC address is a Unicast address Select one or more ports if the destination MAC address is a Multicast address Select no port to set up a discard filter The device discards data packets with the destination MAC address specified in the table entry Table 136 Edit Entry window in the switching Filters for MAC Addresses dialog 158 RM GUI RSPL Rel
15. Configuration frame in the Security Management Access Server dialog SNMP tab page RM GUI RSPL Release 2 0 02 2013 73 Security 2 3 Management Access Parameters Meaning Port number Defines the number of the UDP port from which the SNMP server receives requests from clients Possible values 1 65535 default setting 161 Exception Port 2222 is reserved for internal functions To get the server to use the new port after a change you proceed as follows O Click on Set O Select the active device configuration in the Basic Settings Load Save dialog and click Save O Restart the device SNMPover802 Activates deactivates the access with SNMP via IEEE 802 networks enabled Possible values not selected default setting Access deactivated selected Access activated This function uses for example the HiDiscovery software to configure devices without an IP address Table 45 Configuration frame in the Security Management Access Server dialog SNMP tab page cont Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 46 Buttons RM GUI RSPL 74 Release 2 0 02 2013 Security 2 3 Management Access 2 3 3 Serve
16. Index B index 1 802 1D p Mapping 802 1X authentication history 802 1X IAS 802 1X port clients 802 1X port configuration 802 1X settings A Aging time Aging time address table Alarms ARP table Audit trail log Authentication history 802 1X Authentication list B Basic settings Bridge RSTP Cc Certificate HTTPS CLI Command Line Interface Community name SNMPv1 v2 Configuration check Configuration encryption D Denial of Service Device Status Device status DHCP L2 Relay DoS Download Java applet GUI DSCP IP DSCP mapping E EAPOL port statistics Egress rate limiter ENVM ENVM external memory Encryption device configuration Events External memory F FAQ RM GUI RSPL Release 2 0 02 2013 193 112 114 109 104 102 30 151 150 282 29 245 112 67 19 205 80 81 91 92 93 91 86 221 39 FDB Filter for MAC addresses Fingerprint SSH Flash memory status Flow control Forwarding database G Graphical User Interface GUI Guards H Hardware clock Hardware state HiDiscovery HiView HTTPS certificate HTTPS server HTTP server l IAS 802 1x Importing signature key SSH Industrial HiVision Ingress filtering Ingress rate limiter Installation GUI 156 289 156 243 150 151 156 11 215 114 85 8 73 182 153 11 Integrated authentication server 802 1x 114 IP access restriction IP DSCP mapping J JAR
17. Malformed Packets Bad Authenticators Pending Requests Timeouts Unknown Types Packets Dropped 2 6 RADIUS Meaning Shows the number of malformed accounting response data packets that the device received from the server including data packets with an invalid length Shows the number of accounting response data packets with an invalid authenticator that the device received from the server Shows the number of accounting request data packets that the device sent to the server to which it has not yet received a response from the server Shows how often no response to the server was received before the specified waiting time elapsed Shows the number data packets with an unknown data type that the device received from the server on the accounting port Shows the number of data packets that the device received from the server on the accounting port and then discarded them Table 105 RADIUS Accounting Statistics dialog table cont Buttons Button Reload Help Table 106 Buttons 124 Meaning Updates the fields with the values that are saved in the volatile memory RAM of the device Opens the online help RM GUI RSPL Release 2 0 02 2013 Security 2 7 Pre login Banner 2 7 Pre login Banner This dialog allows you to display a greeting or information text to users before they login to the device The users see this text in the login dialog of the graphical user interface GUI and of the Command L
18. Possible values request response SUCCESS fail timeout idle initialize Shows the current state of the authentication on the device port controlled port status Possible values authorized The terminal device is logged in successfully unauthorized The terminal device is not logged in Table 86 Table in the Security 802 1X Port Authentication Port Configuration dialog section x3c tblsheetnum gt of 5 RM GUI RSPL Release 2 0 02 2013 105 Security Parameters Port Control Quiet Period s Transmit Period s Supplicant Timeout Period s Server Timeout s 2 5 802 1X Port Authentication Meaning Defines how the device grants access to the network port control mode Possible values ForceUnauthorized The device blocks the access to the network You use this setting if a terminal device is connected to the port that does not receive access to the network auto The device grants access to the network if the terminal device has logged in successfully You use this setting if a terminal device is connected to the port that logs in at the authenticator If other terminal devices are connected via the same port they get access to the network without additional authentication ForceAuthorized default setting The device grants access to the network You use this setting if a terminal device is connected to the port that receives access to the network without logging in macBased The device grants acc
19. RM GUI RSPL Release 2 0 02 2013 47 Basic Settings Button Import View Save As 1 4 Load Save Meaning Imports a configuration profile saved in XML format from a PC or from a server in the network You specify the storage location for the configuration profile to be imported in the Storage Type field You specify the name of the configuration profile to be imported in the Name field The device gives you the following options for importing a configuration profile File upload If the file is located on your PC or on a network drive click select the file there TFTP upload If the file is located on a TFTP server enter the URL for the file in the following form tftp lt IP address gt lt path gt lt file name gt SCP or SFTP upload If the file is located on an SCP or SFTP server enter the URL for the file in one of the following forms scp orsftp lt IP address gt lt path gt lt file name gt When you click Update the device displays the Authentication dialog There you enter the User and Password to login to the server scp orsftp lt user gt lt password gt lt IP address gt lt path gt lt file name gt and If the configuration encryption is inactive the device imports the configuration profile only if it is unencrypted If the configuration encryption is active the device imports the device configuration only if it is encrypted
20. RM GUI RSPL Release 2 0 02 2013 Basic Settings Device View 1 1 System The display in this frame shows a simplified version of the structure of the device and its equipment The display also shows the states of the device status LEDs and the device ports at the time of the last update The following symbols represent the status of the individual device ports In some situations some of these symbols interfere with one another You get a detailed description of the port status when you position the mouse pointer over the port symbol Criterion Symbol Bandwidth of the 10 Mbit s device port Port activated connection okay full duplex mode 2 100 Mbit s Port activated connection okay full duplex mode 1000 Mbit s Operating state AdminLink u u Port activated connection okay full duplex mode Half duplex mode activated See the Basic Settings Port Configuration dialog Automatic Configuration checkbox Autonegotiation activated See the Basic Settings Port Configuration dialog Automatic Configuration checkbox Port is blocked by a redundancy function Port is deactivated connection okay Port is deactivated no connection set up See Basic Settings Port Configuration dialog Port on checkbox and Link Current Settings field Table 6 Symbols identifying the status of the device ports RM GUI RSPL Release 2 0 02 2013 23 Basic Settings 1 1 System Reloading The graphical user interface
21. Save Updates the fields with the values that are saved in the volatile memory RAM of the device Resets all the settings in the dialog to the default settings and transfers this change to the volatile memory of the device RAM Opens the online help RM GUI RSPL Release 2 0 02 2013 Diagnostics 8 4 Status Configuration 8 4 Status Configuration Use the dialogs in this menu to define the functions that the device monitors and the notification process The menu contains the following dialogs Device Status Security Status Signal Contact MAC Notification Alarms Traps RM GUI RSPL Release 2 0 02 2013 263 Diagnostics 8 4 Status Configuration 8 4 1 Device Status The device status provides an overview of the overall condition of the device Many process visualization systems record the device status for a device in order to present its condition in graphic form The device displays its current status as Error or OK in the Device Status frame The device determines this status from the individual monitoring results The device displays the detected faults in the Device Status frame of the Basic Configuration System dialog for the monitored functions The device displays the detected fault with the higher priority when 2 or more detected faults occur at the same time The order of the functions listed in the Monitoring frame represents the monitor priority Meaning that the higher a function appears at the top
22. Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Updates the fields with the values that are saved in the volatile memory RAM of the device Opens the online help Table 57 Buttons RM GUI RSPL Release 2 0 02 2013 81 Security 2 3 Management Access 2 3 6 Server SSH This tab allows you to switch the SSH server on off in the device and define its settings The server works with SSH version 2 The SSH server enables access to the management functions of the device with the Command Line Interface via an encrypted connection secure shell The SSH server identifies itself to the clients using its public RSA or DSA key When first setting up the connection the client program shows the user the fingerprint of this key The fingerprint contains a hexadecimal number sequence that is easy to check When you make this number sequence available to the users via a reliable channel they have the option to compare both fingerprints If the number sequences match the client is connected to the correct server The device allows you to create the private and public keys host keys required for RSA and DSA directly on the device Otherwise you have the option to copy your own keys to the device in PEM format Operation Parameters Meaning Operation If the function is switched on encrypted access to the manageme
23. dialog in the Temperature C field Ring Redundancy Defines whether the device monitors the ring redundancy Possible values Ignore default setting The device ignores this parameter Monitor The device changes the device status to Error in the following situations The redundancy function becomes active loss of redundancy reserve The device is a normal ring participant and detects an error in the local configuration Table 253 Monitoring frame in the Diagnostics Status Configuration Device Status dialog RM GUI RSPL Release 2 0 02 2013 265 Diagnostics 8 4 Status Configuration Parameters Meaning Connection error Defines whether the device monitors the link status of the device ports Possible values Ignore default setting The device ignores this parameter Monitor The device changes the device status to Error if the link at a device port is interrupted You have the option of selecting the device ports to be monitored individually ENVM removal Defines whether the device monitors the active external memory Possible values Ignore default setting The device ignores this parameter Monitor The device changes the device status to Error if you remove the active external memory from the device ENVM notin Sync Defines whether the device monitors the synchronization of the device configuration in the device and on the external memory Possible values Ignore default settin
24. field has the value first second or third and the configuration profile is unencrypted the Security Status frame in the Basic Settings System dialog shows an alarm In the Monitoring frame in the Diagnostics Status Configuration Security Status dialog you specify whether the device monitors the parameter Config load from external NVM unsecure Defines whether the device generates a copy on the external memory when saving the configuration profile Possible values selected default setting The device generates a copy of the configuration profile on the external memory when you click Save in the Basic Settings Load Save dialog Not selected The device does not generate a copy of the configuration profile Table 30 Table in the Basic Settings External Memory dialog section x3c tblsheetnum gt of 2 RM GUI RSPL Release 2 0 02 2013 51 Basic Settings 1 5 External Memory Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 31 Buttons RM GUI RSPL 52 Release 2 0 02 2013 Basic Settings 1 6 Port Configuration 1 6 Port Configuration With this dialog you can define settings for the individual device ports The dialog also
25. 1 32 alphanumeric characters Specifies the IP address of the SNTP server Possible values Valid IPv4 address default setting 0 0 0 0 Defines the UDP Port on which the SNTP server expects the time information Possible values 1 65535 default setting 123 Exception Port 2222 is reserved for internal functions Table 119 Table in the Time SNTP Client dialog 136 RM GUI RSPL Release 2 0 02 2013 Time Parameters Status Active 3 2 SNTP Meaning Shows the connection status between the SNTP client and the SNTP server Possible values SUCCESS The device has successfully synchronized the time with the SNTP server badDateEncoded The time information received contains protocol errors synchronization failed other The value 0 0 0 0 is entered for the IP address of the SNTP server synchronization failed or The SNTP client is using a different SNTP server requestTimedoOut The device has not received a reply from the SNTP server synchronization failed serverKissOfDeath The SNTP server is overloaded The device is requested to synchronize itself with another SNTP server If no other SNTP server is available the device asks at intervals longer than the setting in the Request Interval s field whether the server is still overloaded serverUnsynchronized The SNTP server is not synchronized with either a local or an external reference clock synchronization failed versionNotSupported The
26. 2 0 02 2013 Basic Settings 1 7 Restart 1 7 Restart This dialog allows you to restart the device reset port counters and address tables and delete log files Restart Button Meaning Cold start Triggers a restart of the device After the start the device goes through the following phases The device performs a RAM test if this function is switched on in the Diagnostics System Selftest dialog The device starts the Stored Version of the device software see the Basic Settings Software dialog The device loads the settings of the configuration profile designated as Selected see the Basic Settings Load Save dialog Note During the restart the device does not transfer any data During this time the device cannot be accessed by the graphical user interface or other management systems Table 34 Restart frame in the Basic Settings Restart dialog Buttons Button Meaning Reset MAC Removes the MAC addresses designated with the learned setup status Address Table from the forwarding table see the Switching Filter for MAC Addresses table Reset ARP Table Removes the dynamically set up addresses from the ARP table see the Basic Settings Network ARP Table dialog Reset port counters Resets the counter for the port statistics to 0 see the Diagnostics Ports Statistics Table dialog Reset IGMP Removes the IGMP Snooping entries and resets the counter in the Snooping counters Information frame to 0 see the Switching IG
27. 2 0 02 2013 251 Diagnostics 8 3 Ports Proceed as follows to enable the action if a port state occurs LI Enable the port monitor globally L Enable the port monitor on a port LI Configure the conditions on a port LI Configure an action to perform on that port when the condition occurs The dialog contains the following tabs Port Monitor Global Port Monitor Link Flap Port Monitor CRC Fragments 8 3 6 Port Monitor Global In this dialog you activate the configurations defined in the Link Flap and CRC Fragments tabs The device also offers a Duplex Mismatch Detection function Duplex mismatch is a condition where 2 connected devices operate at different duplex modes either half or full duplex The device detects these conditions when you activate the functions and produces the user defined action Operation Parameters Meaning Operation Activates deactivates the Port Monitor function globally on the device Possible values On off default setting Table 237 Operation frame in the Global tab of the Diagnostics Ports Port Monitor dialog RM GUI RSPL 252 Release 2 0 02 2013 Diagnostics Table Parameters Port Link Flap on CRC Fragments on Duplex Mismatch Detection active Active Condition Action 8 3 Ports Meaning Shows the number of the device port to which the table entry relates Activates deactivates the conditions configured in the Link Flap tab to trigger an action Possi
28. All can be set A user has configured the port so that the device transmits all the received Multicast streams in the VLAN to this port This setting is suited to diagnostic purposes for example You configure the port as Forward A11 by selecting the Forward All checkbox on the Configuration page in the Wizard S Static can be set A user has configured the port as a static query port The device only transmits IGMP reports to ports at which it previously received IGMP queries and to statically configured query ports You configure the port as a static query port by selecting the Static checkbox in the Configuration step in the Wizard Table 143 Table in the Switching IGMP Snooping Enhancements dialog 166 RM GUI RSPL Release 2 0 02 2013 Switching 5 4 IGMP Parameters Meaning Display Categories Simplifies the display The chosen value appears in the table instead of filling the cells with the values assigned by the device This makes it easier to analyze and sort the table according to your wishes All Displays every assigned value in the table Learned L Displays in the table the cells which contain among other possible values the value L When this value is selected cells containing values other than L are displayed as Static S Displays in the table the cells which contain among other possible values the value S When this value is selected cells containing values other than s are displayed
29. Banner Time Basic Settings 3 1 1 Global 3 1 2 Daylight Saving Time SNTP 3 2 1 Client 3 2 2 Server Network Security DoS 4 1 1 Global Switching Global Rate Limiter Filter for MAC addresses Z lt Snooping IGMP Snooping Enhancements IGMP Querier Multicasts RON gt Z Global Current Static aa lt aaa anon AAAA w N 101 102 104 109 111 112 114 116 117 118 120 122 123 125 127 128 128 130 134 134 139 143 144 144 149 150 153 156 160 161 166 170 173 175 176 177 179 RM GUI RSPL Release 2 0 02 2013 Contents 5 5 4 Port 5 5 5 Voice 6 QoS Priority 6 1 Global 6 2 Port Configuration 6 3 802 1D p Mapping 6 4 IP DSCP Mapping 6 5 Queue Management 7 Redundancy 7 1 MRP 7 2 Spanning Tree 7 2 1 Global 7 2 2 Port 8 Diagnostics 8 1 System 8 1 1 System Information 8 1 2 Configuration Check 8 1 3 Selftest 8 2 Report 8 2 1 Global 8 2 2 Email Logging Global 8 2 3 Email Logging Addresses 8 2 4 Syslog 8 2 5 Persistent Logging 8 2 6 Hardware State 8 2 7 System Log 8 2 8 Audit Trail 8 3 Ports 8 3 1 Statistics Table 8 3 2 Utilization 8 3 3 SFP 8 3 4 TP cable diagnosis 8 4 Status Configuration 8 4 1 Device Status 8 4 2 Security Status 8 4 3 Signal Contact 8 4 4 MAC Notification 8 4 5 Alarms Traps RM GUI RSPL Release 2 0 02 2013 181 183 187 188 190 193 195 197 199 200 204 205 210 219 220 2
30. Buttons RM GUI RSPL Release 2 0 02 2013 203 Redundancy 7 2 Spanning Tree 7 2 Spanning Tree The Spanning Tree Protocol STP is a protocol that deactivates redundant paths of a network in order to avoid loops If a network component fails on the path the device calculates the new topology and reactivates these paths The device supports the Rapid Spanning Tree Protocol RSTP defined in standard IEEE 802 1D 2004 This protocol is a further development of the Spanning Tree Protocol STP and is compatible with it The Rapid Spanning Tree Protocol enables fast switching to a newly calculated topology without interrupting existing connections RSTP achieves average reconfiguration times of less than a second When you use RSTP in a ring with 10 to 20 devices you can achieve reconfiguration times in the order of milliseconds In this menu you configure and monitor the Spanning Tree functions The menu contains the following dialogs Global Port RM GUI RSPL 204 Release 2 0 02 2013 Redundancy 7 2 Spanning Tree 7 2 1 Global With this dialog you can switch the Spanning Tree function on off view current values relating to the root bridge and define the bridge settings Operation Parameters Meaning Operation Switches the Spanning Tree function in the device on off Possible values On default setting Of The device behaves transparently The device floods received Spanning Tree data packets like Multicast data packets t
31. Display FDB Entries Parameters Display FDB Entries Adds entries to the table for devices without active LLDP support Meaning Possible values Not selected default setting The table only shows entries for devices with LLDP support Selected The table shows entries for devices with and without LLDP support The device uses information from its address table FDB Forwarding Database Table 282 Display FDB Entries checkbox in the LLDP tab of the Diagnostics LLDP Topology Discovery dialog RM GUI RSPL Release 2 0 02 2013 289 Diagnostics LLDP MED 8 5 LLDP LLDP for Media Endpoint Devices LLDP MED is an extension to LLDP that operates between endpoint devices and network devices It specifically provides support for VoIP applications In this support rule it provides an additional set of common advertisement Type Length Value TLV messages The device uses the TLVs for capabilities discovery such as network policy Power over Ethernet inventory management and location information Parameters Port Device Class VLAN ID Priority DSCP Unknown Bit Status Tagged Bit Status Hardware Revision Meaning Shows the number of the device port to which the table entry relates Shows the device class of the remotely connected device A value of notDefined indicates that the device has capabilities not covered by any of the LLDP MED classes A value of endpointClass1 3 indicates that the device has en
32. H HIRSCHMANN A BELDEN BRAND Reference Manual GUI Graphical User Interface Rail Switch Power Lite RSPL RM GUI RSPL Technical Support Release 2 0 02 2013 https hirschmann support belden eu com The naming of copyrighted trademarks in this manual even when not specially indicated should not be taken to mean that these names may be considered as free in the sense of the trademark and tradename protection law and hence that they may be freely used by anyone 2013 Hirschmann Automation and Control GmbH Manuals and software are protected by copyright All rights reserved The copying reproduction translation conversion into any electronic medium or machine scannable form is not permitted either in whole or in part An exception is the preparation of a backup copy of the software for your own use For devices with embedded software the end user license agreement on the enclosed CD DVD applies The performance features described here are binding only if they have been expressly agreed when the contract was made This document was produced by Hirschmann Automation and Control GmbH according to the best of the company s knowledge Hirschmann reserves the right to change the contents of this document without prior notice Hirschmann can give no guarantee in respect of the correctness or accuracy of the information in this document Hirschmann can accept no responsibility for damages resulting from the use of the network components o
33. IP address default setting 0 0 0 0 Port Defines the UDP Port on which the syslog server expects the log entries Possible values 1 65535 default setting 514 Table 217 Table in the Diagnostics Report Syslog dialog RM GUI RSPL 238 Release 2 0 02 2013 Diagnostics 8 2 Report Parameters Meaning Minimum Severity Defines the minimum severity of the events The device sends a log entry for events with this severity and with more urgent severities to the syslog server Possible values emergency alert critical error warning default setting notice informational debug Type Defines the type of the log entry transmitted by the device Possible values systemlog default setting audittrail Active Activates deactivates the transmission of events to the syslog server Selected The device sends events to the syslog server Not selected default setting The transmission of events to the syslog server is deactivated Table 217 Table in the Diagnostics Report Syslog dialog cont Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Create Adds a new table entry Remove Removes the selected table entry Help Opens the online help Table 218 Buttons RM GUI
34. Network Configuration Parameters Meaning Detection Mode Specifies the procedure with which the device detects address conflicts Possible values Active and Passive default setting The device uses active and passive address conflict detection Active Active address conflict detection The device actively avoids communicating with an IP address that already exists in the network The address conflict detection begins as soon as you connect the device to the network or change its IP parameters The device sends 4 ARP probe data packets at the interval defined in the Detection Delay ms field If the device receives a response to these data packets there is an address conflict If the device does not detect an address conflict it sends 2 gratuitous ARP data packets as an announcement The device also sends these data packets when the address conflict detection is switched off Ifthe IP address already exists in the network the device changes back to the previously used IP parameters if possible If the device receives its IP parameters from a DHCP server it sends a DHCPDECLINE message back to the DHCP server After the period specified in the Release Delay s field the device checks whether the address conflict still exists If the device detects 10 address conflicts one after the other it extends the waiting time until the next check to 60 s When the address conflict has been resolved the devic
35. OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER RM GUI RSPL 308 Release 2 0 02 2013 Appendix A 8 Copyright of Integrated Software CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE A 8 2 Expat Copyright c 1998 1999 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright c 2001 2002 2003 2004 2005 2006 Expat maintainers Permission is hereby granted free of charge to any person obtaining a copy of this software and associated documentation files the Software to deal in the Software without restriction including without limitation the rights to use copy modify merge publish distribute sublicense and or sell copies of the Software and to permit persons to whom the Software is furnished to do so subject to the following conditions The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software THE SOFTWARE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIN
36. Port Authentication Global dialog RM GUI RSPL 102 Release 2 0 02 2013 Security 2 5 802 1X Port Authentication Parameters Meaning Activate Dynamic When this function is switched on the device creates the VLAN assigned VLAN Creation by the RADIUS authentication server if it does not exist Possible values Not selected default setting The function is deactivated If the assigned VLAN does not exist the port remains assigned to the original VLAN Selected The function is activated The device creates the VLAN if it does not exist Activate Monitor Activates deactivates the Telnet access M ode When the monitor mode is switched on the device monitors the authentication and helps with error diagnostics If a terminal device has not logged in successfully the device gives the terminal device access to the network Possible values Not selected default setting The monitor mode is switched off Selected The monitor mode is switched on Table 83 Configuration frame in the Security 802 1X Port Authentication Globa1 dialog cont Information Parameters Meaning Monitor Mode Shows the number of terminal devices to which the device gave network Clients access even though they did not login successfully The prerequisite is that the Activate Monitor Mode function is switched on see the Configuration frame Non Monitor Mode Shows the number of terminal devices to which the device gave network Clients access
37. RAM and into the non volatile memory NVM 00 ogg Note The prerequisite for loading a configuration profile from the external memory ENVM is that the Config Priority field in the Basic Settings External Memory dialog has the value first In the state on delivery this value is preset Cancels the configuration encryption in the device O Enter the existing password in the Remove dialog O Select the Save Configuration afterwards checkbox to also remove the encryption for the Selected configuration profile in the non volatile memory NVM and in the external memory ENV Note If you are keeping other configuration profiles in encrypted form in the memory the device prevents you afterwards from activating these configuration profiles or designating them as Selected Table 25 Configuration Encryption frame in the Basic Settings Load Save dialog section x3c tblsheetnum gt of 2 40 RM GUI RSPL Release 2 0 02 2013 Basic Settings Information Parameters NVM synchron to running config ENVM synchron to NVM 1 4 Load Save Meaning Shows whether the configuration profile in the volatile memory RAM and the selected configuration profile in the non volatile memory NVM are the same Possible values Selected The configuration profiles are the same Not selected The configuration profiles are different Changes in the device are only saved temporarily if for examp
38. RSPL Release 2 0 02 2013 239 Diagnostics 8 2 Report 8 2 5 Persistent Logging The device allows you to save all log entries permanently in a file on the external memory Therefore even after the device is restarted you have access to the log entries With this dialog you can limit the size of the log file and define the minimum severity for the events to be saved If the log file attains the specified size the device archives this file and saves the following log entries in a newly created file In the table the device shows you the log files held on the external memory As soon as the specified maximum number of files has been attained the device deletes the oldest file and renames the remaining files This ensures that there is always enough memory space on the external memory Operation Parameters Meaning Operation When the function is switched on the device saves the log entries in a file on the external memory Possible values On default setting Off Only activate this function when the external memory is available on the device Table 219 Operation frame in the Diagnostics Report Persistent Logging dialog RM GUI RSPL 240 Release 2 0 02 2013 Diagnostics 8 2 Report Configuration Parameters Meaning Max File Size Defines the maximum size of the log file in KBytes If the log file attains the specified size the device archives this file and saves the following log entries in a newly created file Possi
39. Release 2 0 02 2013 Security New Entry 2 2 Authentication List In this frame you set up a new authentication list To display the frame you click the Create button Parameters Name Policy 1 Policy 2 Policy 3 Policy 4 Policy 5 Active Meaning Specifies the name of the list Possible values 1 32 alphanumeric characters Specifies the authentication method that the device uses The device gives you the option of a fall back solution For this you specify one other method in each of the Policy 2 to Policy 5 fields Possible values local The device authenticates the users by using the local user management see the Security User Management dialog radius The device authenticates the users with a RADIUS server in the network You specify the RADIUS server in the Security RADIUS Authentication Server dialog las The device authenticates the terminal devices logging in via 802 1X with the integrated authentication server IAS implemented in the device The integrated authentication server manages the login data in a separate database see the security 802 1X Port Authentication Integrated Authentication Server dialog reject The device rejects the authentication request from the user Activates deactivates the list Possible values Selected The list is activated The device uses the policies in this list when users access the device with the relevant application Not selected The list is deactivated
40. Shows the IP address of the server Shows the time interval in hundredths of a second between the last response received from the server Access Reply Access Challenge and the corresponding data packet sent Access Request Shows the number of access data packets that the device sent to the server This value does not take repetitions into account Shows the number of access data packets that the device retransmitted to the server Shows the number of access accept data packets that the device received from the server Shows the number of access reject data packets that the device received from the server Shows the number of access challenge data packets that the device received from the server Shows the number of malformed access response data packets that the device received from the server including data packets with an invalid length Shows the number of access response data packets with an invalid authenticator that the device received from the server Shows the number of access request data packets that the device sent to the server to which it has not yet received a response from the server Shows how often no response to the server was received before the specified waiting time elapsed Shows the number data packets with an unknown data type that the device received from the server on the authentication port Shows the number of data packets that the device received from the server on the authentication port and then disca
41. Transmit default setting The device port transmits LLDP data packets and stores information about neighboring devices Disable The device port transmits no LLDP data packets and stores no information about neighboring devices Notification Enabled Specifies whether LLDP notifications are enabled on this device port Possible values Selected LLDP notifications are enabled on this device port Not selected default setting LLDP notifications are disabled on this device port Transmit Port Specifies whether the device transmits a TLV Type Length Value with Description the port description Possible values Selected default setting The device transmits a TLV with the port description Not selected The device does not transmit a TLV with the port description Transmit System Specifies whether the device transmits a TLV Type Length Value with Name the device name Possible values Selected default setting The device transmits a TLV with the device name Not selected The device does not transmit a TLV with the device name Transmit System Specifies whether the device transmits a TLV Type Length Value with Description the system description Possible values Selected default setting The device transmits a TLV with the system description Not selected The device does not transmit a TLV with the system description Table 279 Table in the Diagnostics LLDP Configuration dialog cont RM GUI RSPL 286 Release 2 0 02 20
42. VLAN type Table 92 Table in the Security 802 1X Port Authentication Port Authentication History dialog cont Port Parameters Port Meaning Simplifies the display and in the table shows only the entries relating to the port selected here This makes it easier for you to record the table and sort it as you desire Possible values all The table shows the entries for every device port lt Port number gt The table only shows the entries that apply to the port selected here Table 93 802 1X Port Authentication History dialog Port field RM GUI RSPL Release 2 0 02 2013 113 Security 2 5 802 1X Port Authentication Buttons Button Meaning Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Clear History Deletes the information recorded during the authentication from the table Help Opens the online help Table 94 Buttons 2 5 6 Integrated Authentication Server The Integrated Authentication Server IAS allows you to authenticate terminal devices using IEEE 802 1X Compared to RADIUS the IAS has a very limited range of functions The authentication is only based on the user name and the password In this dialog you manage the login data of the terminal devices The device allows you to set up up to 100 sets of login data To authenticate the terminal devices via the Integrated Authentication Server you assign the ias policy to the 8021x list in the Securi
43. accepts the password if it contains at least as many numbers as specified here Possible values 0 16 default setting 1 The value 0 deactivates this setting The device accepts the password if it contains at least as many special characters as specified here Possible values 0 16 default setting 1 The value 0 deactivates this setting Table 37 Password Policy frame in the Security User Management dialog RM GUI RSPL Release 2 0 02 2013 61 Security Table 2 1 User Management Every user requires an active user account to gain access to the management functions of the device The table allows you to set up and manage user accounts To change settings click the desired parameter in the table and modify the value Parameters User Name Active Password Meaning Shows the name of the user account To create a new user account you click Create Activates deactivates the user account Possible values Selected The user account is active The user accepts the login of a user with this user name Not selected The user account is inactive The user rejects the login of a user with this user name If only one user account exists with the administrator access role this user account is always active Shows asterisks instead of the password with which the user logs in To change the password click the relevant field Possible values 6 64 alphanumeric characters including the foll
44. address Default setting Table 11 IP Parameter frame in the Basic Settings Network Global dialog 28 RM GUI RSPL Release 2 0 02 2013 Basic Settings 1 2 Network Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 12 Buttons 1 2 2 ARP Table This dialog allows you to display the MAC and IP addresses of the neighboring devices connected to the device The device determines these addresses using the Address Resolution Protocol ARP before the connection to the corresponding neighboring device is set up for the first time Table Parameters Meaning Port Number of the device port to which the table entry relates MAC Address Shows the MAC address of a device that responded to an ARP query to this device port IP Address Shows the IP address of a device that responded to an ARP query to this device port Table 13 Table in the Basic Settings Network ARP Table dialog RM GUI RSPL Release 2 0 02 2013 29 Basic Settings 1 2 Network Parameters Meaning Type Displays the type of the address entry Possible values static Static ARP entry This entry is kept when the ARP table is deleted dynamic Dynamic entry The device deletes this
45. after they logged in successfully Authentication Shows the method that the device currently uses to authenticate the Method terminal devices using IEEE 802 1X You specify the method to be used in the Security Authentication List dialog O To authenticate the terminal devices via a RADIUS server you assign the radius policy to the 8021x list O To authenticate the terminal devices via the Integrated Authentication Server IAS you assign the ias policy to the 8021x list Table 84 Information frame in the Security 802 1X Port Authentication Global dialog RM GUI RSPL Release 2 0 02 2013 103 Security Buttons Button Set Reload Help Table 85 Buttons 2 5 802 1X Port Authentication Meaning Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Updates the fields with the values that are saved in the volatile memory RAM of the device Opens the online help 2 5 2 Port Configuration This dialog allows you to define the access settings for every device port Table Parameters Port Port Initialization Meaning Shows the number of the device port to which the table entry relates Initializes the device port in order to activate the access control on the port or reset it to its initial state Only use this function if the value auto is specified for the port in the Port Control
46. as Automatic A Displays in the table the cells which contain among other possible values the value A When this value is selected cells containing values other than A are displayed as Learn by LLDP ALA Displays in the table the cells which contain among other possible values the value ALA When this value is selected cells containing values other than ALA are displayed as Forward all FA Displays in the table the cells which contain among other possible values the value FA When this value is selected cells containing values other than FA are displayed as Table 144 Display Categories pulldown menu in the switching IGMP Snooping Enhancements dialog Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Wizard Opens a Wizard that supports you in selecting and configuring a VLAN port Help Opens the online help Table 145 Buttons RM GUI RSPL Release 2 0 02 2013 167 Switching 5 4 IGMP Wizard Select VLAN Port This page of the Wizard allows you to assign a VLAN ID to a port Parameters VLAN ID Port Meaning Select the ID of the VLAN Possible values 1 4042 Select the device port Possible values Ts Ly Te 2 o
47. at which the SNTP server sends the SNTP packets in Broadcast mode Possible values 1 65535 default setting 123 Exception Port 2222 is reserved for internal functions Defines the ID of the VLAN in which the SNTP server of the device sends the SNTP packets in Broadcast mode Possible values 0 4042 default setting 1 If you set the value to 0 the SNTP server of the device sends the SNTP packets in the same VLAN in which the management functions of the device can be accessed See the Basic Settings Network dialog Defines the time interval at which the SNTP server of the device sends SNTP broadcast packets Possible values 64 1024 default setting 128 Defines whether the device disables the SNTP Broadcast server when it is synchronized to the local clock Possible values Selected The device disables the SNTP Broadcast server when it is synchronized to the local clock The SNTP server continues to reply to requests from SNTP clients In the SNTP packet the SNTP server informs the clients that it is synchronized locally Not selected default setting The SNTP Broadcast server remains active when the device is synchronized to the local clock Table 122 Configuration frame in the Time SNTP Server dialog cont 140 RM GUI RSPL Release 2 0 02 2013 Time 3 2 SNTP State Parameters Meaning State Shows the state of the SNTP server Possible values disabled The SNTP server is deactivated notSynchroni
48. attached to an interface for short or open circuit The table displays the cable status and estimated length The device also displays the individual cable pairs connected to the port When the device detects a short circuit or an open circuit in the cable it also displays the estimated distance to the problem Note This test interrupts traffic on the port RM GUI RSPL Release 2 0 02 2013 249 Diagnostics 8 3 Ports Configuration Parameters Meaning Port Select the port to test from the pull down menu Use for copper based ports exclusively Table 233 Configuration frame in the Diagnostics Ports TP cable diagnosis dialog Information Parameters Meaning Port Shows the number of the device port to which the table entry relates Status Status of the Virtual Cable Tester Possible values active Cable testing is in progress Select to this value to start the test SUCCESS The device displays this entry after performing a successful test failure The device displays this entry after an interruption in the test uninitialized The device displays this entry while in standby Table 234 Information frame in the Diagnostics Ports TP cable diagnosis dialog Table Parameters Meaning Cable Pair Shows the cable pair to which this entry relates The device uses the first PHY index supported to show the values Table 235 Information frame in the Diagnostics Ports TP cable diagnosis dialog RM GUI RSPL 250 Release 2
49. been inactive for this time it ends the session for the user logged on Possible values 0 160 default setting 5 The value 0 deactivates the function and the user remains logged on when inactive Table 69 Configuration frame in the Security Management Access Web dialog 90 RM GUI RSPL Release 2 0 02 2013 Security 2 3 Management Access Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 70 Buttons 2 3 10 CLI With this dialog you can define settings for the Command Line Interface CLI You will find detailed information on the Command Line Interface in the Command Line Interface reference manual The dialog contains the following tabs CLI Global CLI Login Banner RM GUI RSPL Release 2 0 02 2013 91 Security 2 3 Management Access 2 3 11 CLI Global This tab allows you to change the CLI prompt and to define the automatic closing of sessions via the V 24 interface when they have been inactive Configuration Parameters Meaning Login Prompt Defines the character string that the device displays in the Command Line Interface CLI at the start of every command line Possible values 0 32 alphanumeric characters
50. beneath it Parameters Meaning Rule ID Rule ID of the deviations having occurred The dialog combines several deviations with the same rule ID under one rule ID Table 195 Table in the Diagnostics System Configuration Check dialog RM GUI RSPL Release 2 0 02 2013 221 Diagnostics 8 1 System Parameters Meaning Level Level of deviation between this device s configuration and the recognized neighboring devices The rule level can have 3 statuses O Information The performance of the communication between the two devices is not impaired PN Warning The performance of the communication between the two devices may be impaired Error Communication between the two devices is impaired Message The dialog specifies more precisely the information warnings and errors having occurred Table 195 Table in the Diagnostics System Configuration Check dialog cont Note A neighboring device without LLDP support which forwards LLDP packets may be the cause of equivocal messages in the dialog This occurs if the neighboring device is a hub or a switch without management which ignores the IEEE 802 1D 2004 standard In this case the dialog displays the devices recognized and connected to the neighboring device as connected to the switch port even though they are connected to the neighboring device Note If you have more than 39 VLANs configured on the device the dialog always shows a warning The reason is the limited number of poss
51. column Possible values Not selected default setting Keeps the current state of the device port Selected Initializes the device port When the initialization is complete the device changes the value to Not selected again Table 86 Table in the Security 802 1X Port Authentication Port Configuration dialog section x3c tblsheetnum gt of 5 104 RM GUI RSPL Release 2 0 02 2013 Security Parameters Port Reauthentication Authentication Activity Backend Authentication State Authentication State 2 5 802 1X Port Authentication Meaning If this function is switched on the authenticator requests the terminal device to login again Only use this function if the value auto is specified for the port in the Port Control column Possible values Not selected default setting Keeps the terminal device logged in Selected Requests the terminal device to login again Afterwards the device changes the value to Not selected again The device also allows you to periodically request the terminal device to login again see the Reauthentication Enabled column Displays the current state of the authenticator authenticator PAE state Possible values initialize disconnected connecting authenticating authenticated aborting authenticating held force Authorized force Unauthorized Shows the current state of the connection to the authentication server backend authentication state
52. ctitical error warning notice default setting informational debug Table 202 SNMP Logging frame in the Diagnostics Report Globa1 dialog cont When you activate the logging of SNMP requests the device sends these as events with the preset severity notice to the list of syslog servers The preset minimum severity for a syslog server entry is critical RM GUI RSPL Release 2 0 02 2013 229 Diagnostics 8 2 Report To send SNMP requests to a syslog server you have a number of options to change the default settings Select the ones that meet your requirements best LI Set the severity for which the device creates SNMP requests as events to warning or error and change the minimum severity for a syslog entry for one or more syslog servers to the same value You also have the option of creating a separate syslog server entry for this L Only set the severity for SNMP requests to critical or higher The device then sends SNMP requests as events with the severity critical or higher to the syslog servers LI Only set the minimum severity for one or more syslog server entries to notice or lower Then it may happen that the device sends a large number of events to the syslog servers CLI Logging Parameters Meaning Operation When the function is switched on the device logs all commands received through Command Line Interface CLI Possible values On off default setting Table 203 CLI Logging frame i
53. device monitors the power supply Possible values Selected default setting The device changes the device status to Error if one of the following conditions applies The voltage source is providing an incorrect voltage The voltage source fails The power supply within the device is defective Not selected The device status remains unchanged under the conditions named above Table 255 Propagate State table in the Diagnostics Status Configuration Device Status dialog Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Table 256 Buttons RM GUI RSPL Release 2 0 02 2013 267 Diagnostics 8 4 Status Configuration Button Meaning Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 256 Buttons cont RM GUI RSPL 268 Release 2 0 02 2013 Diagnostics 8 4 Status Configuration 8 4 2 Security Status This dialog gives you an overview of the status of the safety relevant settings in the device The device displays its current status as Error or OK in the Security Status frame The device determines this status from the individual monitoring results The device displays the detected faults in the Security Status frame of the Basic Configuration System di
54. following ICMP parameters Fragmented data packets ICMP packets from a specific size upwards Broadcast pings Parameter Meaning Filter Fragmented Activates or deactivates the filter for fragmented ICMP packets Packets Possible values Selected The device detects fragmented ICMP packets and discards these Not selected default setting The filter for fragmented ICMP packets is deactivated Allowed Packet Defines the maximum allowed size of ICMP packets in bytes Size Possible values 0 1472 The maximum allowed size of ICMP packets in bytes 512 default setting The default allowed size of ICMP packets is 512 bytes Note Select the Filter by Packet Size checkbox if you want the device to discard incoming data packets whose size exceeds the maximum allowed size for ICMP packets Filter by Packet Activates or deactivates the filter for incoming ICMP data packets whose Size size exceeds the maximum allowed packet size Possible values Selected The device detects and discards ingress ICMP data packets whose size exceeds the allowed packet size see the input field Allowed Packet Size Not selected default setting The device forwards ingress ICMP data packets whose size is less than the allowed packet size Table 127 ICMP frame in the Network Security DoS Global dialog RM GUI RSPL Release 2 0 02 2013 147 Network Security 4 1 DoS Buttons Button Meaning Set Transfers the changes to the volatile mem
55. last received Address IGMP query was sent out Last Querier Shows the IGMP protocol version that the Multicast router used when Version sending out the last IGMP query received in this VLAN Table 151 Table in the switching IGMP Querier dialog cont Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 152 Buttons RM GUI RSPL 172 Release 2 0 02 2013 Switching 5 4 IGMP 5 4 4 Multicasts The device allows you to specify how it transmits data packets with unknown Multicast addresses Either the device discards these data packets floods them to all ports or transmits them only to the ports that previously received query packets The device also allows you to transmit the data packets with known Multicast addresses to the query ports Configuration Parameters Meaning Unknown Multicasts Defines how the device transmits the data packets with unknown Multicast addresses Possible values Send to Query Ports The device sends data packets with an unknown MAC IP Multicast address to the query ports Send To All Ports default setting The device sends data packets with an unknown MAC IP Multicast address to the ports Discard The device d
56. logged in Device name Network protocol by means of which you are logged in to the device The device automatically refreshes the values once a minute To refresh the display manually click the button By right clicking this symbol you can open the Basic Settings System dialog and the Basic Settings Network Global dialog directly When you position the mouse pointer over the button the user interface opens a bubble help with the summary of the Diagnostics System Configuration Check dialog To refresh the display click the button By right clicking this symbol you can open the Diagnostics System Configuration Check dialog directly Ends the session and terminates the connection to the device Shows the time in seconds after which the device automatically ends the session when the user is inactive You specify the timeout period in the Security Management Access Web dialog Table 2 Buttons in the status line RM GUI RSPL Release 2 0 02 2013 15 Graphical User Interface Button k Function Shows that the configuration profile in the volatile memory RAM differs from the selected configuration profile in the permanent memory NVM Save the current device configuration permanently so that the current settings will still be available to you after a restart To permanently save the changes choose the selected configuration profile in the Basic Settings Load Save dialog and click Save The device automati
57. messages for the redundancy configuration and the possible causes of errors The following messages are possible if the device is operating as a ring client or a ring manager Redundancy Available The redundancy is set up When a component of the ring is down the redundant line takes over its function Configuration error Ring port link error Error in the cabling of the ring ports The following messages are possible if the device is operating as a ring manager Configuration error Packet of other ring manager received Another device exists in the ring that is operating as the ring manager Activate the Ring Manager function if there is exactly one device in the ring Configuration error Connection in ring is connected to incorrect port Aline in the ring is connected with a different port instead of with a ring port The device only receives test data packets on 1 ring port Table 182 Information frame in the Redundancy MRP dialog Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Delete ring Switches off the redundancy function and resets all the settings in the configuration dialog to the state on delivery Help Opens the online help Table 183
58. monitoring of Topology Change Notifications is switched on The device port ignores the Topology Change flag in received STP BPDUs If the received BPDU contains other information that causes a topology change the device processes the BPDU even if the TCN guard is switched on Example The device receives better path information for the root bridge Table 191 Guards tab page in the Redundancy Spanning Tree Port dialog section x3c tblsheetnum gt of 3 RM GUI RSPL Release 2 0 02 2013 215 Redundancy Parameters Loop Guard Loop State Trans into Loop Trans out of Loop 7 2 Spanning Tree Meaning Switches the monitoring of loops on off on the device port With this setting the device prevents loops if the device port does not receive any more STP BPDUs Only use this setting for device ports with the STP role alternate backup or root Possible values Not selected default setting The monitoring of loops is switched off If the device port does not receive any STP BPDUs for a while the device sets the state of the port to the value forwarding Selected The monitoring of loops is switched on This prevents loops e g if you switch off the Spanning Tree function on the remote device or if the connection is only interrupted in the receiving direction Ifthe device port does not receive any STP BPDUs for a while the device sets the state of the port to the value discarding and the value in t
59. of the list the higher the priority When you repair the displayed detected fault the device displays the next higher detected fault Device Status Parameters Meaning Device Status Displays the current status of the device The device determines the status from the individual monitored parameters Possible values Error OK Table 251 Device Status frame in the Diagnostics Status Configuration Device Status dialog RM GUI RSPL 264 Release 2 0 02 2013 Diagnostics 8 4 Status Configuration Trap Configuration Parameters Meaning Generate Trap Activates deactivates the sending of an SNMP message trap when the value in the Device Status field changes Possible values Selected The device sends a trap Not selected default setting The device does not send a trap The prerequisite for sending SNMP messages traps is that the function is switched on in the Diagnostics Alarms Traps dialog and at least 1 SNMP manager is defined Table 252 Trap Configuration frame in the Diagnostics Status Configuration Device Status dialog Monitoring Parameters Meaning Temperature Defines whether the device monitors the temperature in the device Possible values Ignore The device ignores this parameter Monitor default setting The device changes the device status to Error if the temperature exceeds or falls below the temperature thresholds You define the temperature thresholds in the Basic Settings System
60. parameter Diagnostics System Selftest dialog Activate SysMon1 parameter Diagnostics System Selftest dialog Load default config on error parameter Table 2 Buttons in the status line cont Instructions for saving the device configuration LI To copy changed settings to the volatile memory RAM click the Set button LI To refresh the display in the dialogs click the Reload button O To keep the changed settings even after restarting the device click the 16 Save button in the Basic Settings Load Save dialog RM GUI RSPL Release 2 0 02 2013 Graphical User Interface Note Unintentional changes to the device configuration may cause the connection between your PC and the device to be terminated Before you change the settings in the device switch on the function Undo Modifications of Configuration in the Basic Settings Load Save dialog With this function the device restores the active device configuration saved in the NVM if the connection is interrupted after the settings have been changed The device remains reachable RM GUI RSPL Release 2 0 02 2013 17 Graphical User Interface RM GUI RSPL 18 Release 2 0 02 2013 Basic Settings 1 Basic Settings With this menu you can configure the basic settings of the device The menu contains the following dialogs System Network Software Load Save External Memory Port Configuration Restart RM GUI RSPL Release 2 0 02 2013 19 Bas
61. select a time 2 30 s Activates deactivates the flow control globally in the device Possible values Not selected default setting Selected For this you also activate the Flow Control function for the device ports in the Basic Settings Port Configuration dialog When you are using a redundancy function you deactivate the flow control on the participating ports If the flow control and the redundancy function are active at the same time there is a risk that the redundancy function will not operate as intended Table 129 Configuration frame in the switching Global dialog RM GUI RSPL Release 2 0 02 2013 151 Switching 5 1 Global Parameters Meaning VLAN Unaware Defines the bridging mode of the device Mode Possible values Not selected default setting The device works in the VLAN Aware bridging mode 802 1Q The device evaluates the VLAN tags in the data packets The device transmits the data packets based on their destination MAC address or destination IP address in the corresponding VLAN The device evaluates the priority information contained in the data packet Selected The device works in the VLAN Unaware bridging mode 802 1D The device ignores the VLAN settings in the device and the VLAN tags in the data packets The device transmits the data packets based on their destination MAC address or destination IP address in VLAN 1 The device ignores the VLAN settings defined in the S
62. server Operation Parameters Meaning Operation When the function is switched on the device operates as an SNTP client Possible values On off default setting Table 116 Operation frame in the Time SNTP Client dialog RM GUI RSPL 134 Release 2 0 02 2013 Time 3 2 SNTP Configuration Parameters Meaning Mode Defines whether the device actively requests the time information from an Request Interval s Disable Client after successful Synchronization SNTP server known and configured in the network Unicast mode or passively waits for the time information from a random SNTP server Broadcast mode Possible values unicast default setting The device only takes the time information from the configured SNTP server The device sends Unicast requests to the SNTP server and evaluates its responses broadcast The device obtains the time information from one or more SNTP or NTP servers The device only evaluates the Broadcasts or Multicasts from these servers Defines the interval in seconds at which the device requests time information from the SNTP server Possible values 5 3600 default setting 30 Defines whether the device disables the SNTP client when it has successfully synchronized the time Possible values Selected The device deactivates the SNTP client after successful synchronization Not selected default setting The SNTP client remains activated after successful synchronization Table 117 Con
63. signal contact ignores this parameter Monitor default setting The signal contact opens if the temperature exceeds falls below the threshold values You define the temperature thresholds in the Basic Settings System dialog in the Temperature C field Connection error Defines whether the signal contact monitors the link status of the device ports Possible values Ignore default setting The signal contact ignores this parameter Monitor The signal contact opens if the link on a device port is interrupted You have the option of selecting the device ports to be monitored individually ENVM removal Defines whether the signal contact monitors the external memory Possible values Ignore default setting The signal contact ignores this parameter Monitor The signal contact opens if you remove the external memory from the device Table 264 Monitoring Correct Operation frame in the Diagnostics Status Configuration Signal Contact dialog RM GUI RSPL 276 Release 2 0 02 2013 Diagnostics 8 4 Status Configuration Parameters Meaning ENVM notin Sync Defines whether the signal contact monitors the synchronization of the device configuration in the device and on the external memory Possible values Ignore default setting The signal contact ignores this parameter Monitor The signal contact opens in the following situations The device configuration only exists in the device The devic
64. text Access Role Defines the access role profile that regulates the user s access to the individual functions of the device Possible values guest The user is authorized to monitor the device operator The user is authorized to monitor and configure the device with the exception of security settings for the access to the device administrator The user is authorized to monitor and configure the device unauthorized The user is blocked and the device rejects the user s login You assign this value to temporarily lock the user account If an error occurs when another access role is being assigned the device assigns this access role to the user account User locked Locks unlocks the user s access to the management functions of the device Possible values Selected The user s access is locked Not selected The user s access is unlocked Table 39 New Entry frame in the Ssecurity User Management dialog section x3c tblsheetnum gt of 3 RM GUI RSPL Release 2 0 02 2013 65 Security Parameters Policy Check SNMP Auth Type SNMP Encryption Type 2 1 User Management Meaning Defines whether the device checks the password according to the defined policy when it is being set up or changed Possible values Selected The device checks the password according to the policy defined in the Password Policy frame Not selected The device accepts the password without checking it Defines the authentication prot
65. the Selected configuration profile during a restart or when applying the function Undo Modification of Configuration The non volatile memory provides space for multiple configuration profiles depending on the number of settings saved in the configuration profile The device manages a maximum of 20 configuration profiles in the non volatile memory If you select a configuration profile in the table and click Activate the device loads this configuration profile to the volatile memory RAM ENVM external memory On the external memory the device saves a backup copy of the Selected configuration profile The prerequisite for this is that checkmark is selected in the Auto save config on ENVM field in the Basic Settings External Memory dialog Name Shows the name of the configuration profile Possible values running config Name of the m profile in the volatile memory RAM config Name of the factory setting configuration profile in the non volatile memory NVM User defined name The device allows you to save a configuration profile with a user defined name by selected an existing configuration profile in the table and clicking Save As Modification Date Shows the time at which a user last saved the configuration profile Table 28 Table in the Basic Settings Load Save dialog section x3c tblsheetnum gt of 3 RM GUI RSPL Release 2 0 02 2013 43 Basic Settings 1 4 Load Save Parameters Meaning Selecte
66. the external memory from the device during operation ok The external memory is connected and ready for operation outoOfMemory The memory space is occupied on the external memory genericErr The device has detected an error Table 24 External Memory frame in the Basic Settings Load Save dialog RM GUI RSPL 38 Release 2 0 02 2013 Basic Settings 1 4 Load Save Configuration encryption Parameters Meaning Active Shows whether the configuration encryption is switched on in the device Possible values Not selected The configuration encryption is switched off The device loads a configuration from the non volatile memory NVM only if it is unencrypted Selected The configuration encryption is switched on The device loads a configuration from the non volatile memory NVM only if it is encrypted and the password matches the password stored in the device If the Config Priority field has the value first second or third and the configuration profile is unencrypted the Security Status frame in the Basic Settings System dialog shows an alarm In the Monitoring frame in the Diagnostics Status Configuration Security Status dialog you specify whether the device monitors the parameter Config load from external NVM unsecure Table 25 Configuration Encryption frame in the Basic Settings Load Save dialog section x3c tblsheetnum gt of 2 RM GUI RSPL Release 2 0 02 2013 39 Basic Settings Parameters Set Password
67. the lowest priority Table 174 Table in the QoS Priority 802 1D p Mapping dialog DSCP Value DSCP Name Traffic class 0 Best Effort CSO 2 1 7 2 8 CS1 0 9 11 13 15 0 10 12 14 AF11 AF12 AF13 0 16 CS2 1 17 19 21 23 1 18 20 22 AF21 AF22 AF23 1 24 CS3 3 25 27 29 31 3 26 28 30 AF31 AF32 AF33 3 32 CS4 4 33 35 37 39 4 Table 175 Default assignment of the DSCP values to the traffic classes RM GUI RSPL Release 2 0 02 2013 195 QoS Priority DSCP Value 34 36 38 40 41 42 43 44 45 47 46 48 49 55 56 57 63 DSCP Name AF41 AF42 AF43 CS5 EF CS6 CS7 6 4 IP DSCP Mapping Traffic class NI NN O Oo Oo oy amp Table 175 Default assignment of the DSCP values to the traffic classes cont Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 176 Buttons 196 RM GUI RSPL Release 2 0 02 2013 QoS Priority 6 5 Queue Management 6 5 Queue Management With this dialog you can activate deactivate the Strict Priority function for the traffic classes When the Strict Priority function is switched off the device controls the processing of the priority queue with Weighted Fair Queuing You have the option of assigning
68. volatile memory RAM of the device Reset Enables the port when disabled by the Port Monitor function Help Opens the online help Table 246 Buttons RM GUI RSPL 260 Release 2 0 02 2013 Diagnostics 8 3 Ports 8 3 10 Port Mirroring The device ports to be reviewed are known as source ports The device port to which the device copies the data packets to be reviewed is called the destination port Only physical device ports are suitable to be source or destination ports In port mirroring the device copies valid data packets transmitted and received by the source ports to the destination port This does not affect the data traffic on the source ports during port mirroring You can use a management tool connected at the destination port e g an RMON probe to monitor the data traffic of the source ports Operation Parameters Meaning Operation When the function is switched on the device copies the data packets for the select source ports to the destination port Possible values On off default setting Table 247 Operation frame in the Diagnostics Ports Port Mirroring dialog Destination port Parameters Meaning Destination Port Specifies the destination port The device copies the data packets from the source ports to this device port Possible values lt Port number gt default setting no Port You cannot specify as the destination port any device port that you already defines as a source port in the table
69. without evaluating them Received data packets with a Multicast destination address are transmitted to all ports by the device Table 138 Operation frame in the Switching IGMP IGMP Snooping dialog RM GUI RSPL Release 2 0 02 2013 161 Switching 5 4 IGMP Information Parameters Meaning Multicast Control Frames Processed Shows the number of Multicast control data packets processed This statistic encompasses the following packet types IGMP Reports IGMP Queries version V1 IGMP Queries version V2 IGMP Queries version V3 IGMP Queries with an incorrect version PIM or DVMRP packets The device uses the Multicast control data packets to create the address table for transmitting the Multicast data packets Possible values 0 231 1 You use the Reset IGMP Snooping Counter button in the Basic Settings Restart dialog or the clear igmp snooping CLI command to reset the IGMP Snooping entries including the counter for the processed Multicast control data packets Table 139 Information frame in the Switching IGMP IGMP Snooping dialog Interface This tab page allows you to configure the IGMP Snooping protocol for every port Parameters Port Active Meaning Shows the number of the device port to which the table entry relates Activates deactivates the IGMP Snooping protocol for this port Prerequisite The IGMP Snooping protocol is activated globally in the device Possible valu
70. written authorization of the copyright holder RM GUI RSPL 310 Release 2 0 02 2013 Appendix A 8 Copyright of Integrated Software A 8 4 libssh2 Copyright c 2004 2007 Sara Golemon lt sarag libssh2 org gt Copyright c 2005 2006 Mikhail Gusarov lt dottedmag dottedmag net gt Copyright c 2006 2007 The Written Word Inc Copyright c 2007 Eli Fant lt elifantu mail ru gt Copyright c 2009 Daniel Stenberg Copyright C 2008 2009 Simon Josefsson All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution Neither the name of the copyright holder nor the names of any other contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRE
71. you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 111 Buttons RM GUI RSPL Release 2 0 02 2013 129 Time 3 1 Basic Settings 3 1 2 Daylight Saving Time On this tab you activate the automatic daylight saving time switching You select the beginning and the end of summertime using a predefined profile or you define these settings individually During summertime the device puts the local time forward by 1 hour Operation Parameters Meaning Operation When the function is switched on the device automatically switches between summertime and wintertime Possible values On Off default setting The device switches at the times specified in the Summertime Begin and Summertime End frames Profile Opens the Profile dialog There you select a predefined configuration for the beginning and the end of summertime The profile selected overwrites the settings in the Summertime Begin and Summertime End frames Table 112 Operation frame in the Time Basic Settings dialog Daylight Saving Time tab page RM GUI RSPL 130 Release 2 0 02 2013 Time 3 1 Basic Settings Summertime Begin In the first 3 fields you define the day for the beginning of summertime and in the last field the time The devices switches to summertime when the time in the System Time f
72. 0 02 2013 Diagnostics 8 3 Ports Parameters Meaning Result Shows the results of the cable test Possible values Normal The cable is functioning properly Open There is a break in the cable causing an interruption in the circuit Short Wires in the cable are touching together causing a short circuit Unknown The device displays this value for untested cable pairs Min Length The estimated length of the cable in meters This value indicates the minimum estimated length The device returns 0 if Status is active failure or uninitialized or the cable length is unknown Max Length The estimated length of the cable in meters This value indicates the maximum estimated length The device returns 0 if Status is active failure or uninitialized or the cable length is unknown Distance m The estimated distance in meters from the end of the cable to the failure location The device returns 0 if Status is active failure or uninitialized Table 235 Information frame in the Diagnostics Ports TP cable diagnosis dialog cont Buttons Button Meaning Start Initiates a cable test on the selected port Help Opens the online help Table 236 Buttons 8 3 5 Port Monitor This feature monitors port states The device offers you the ability to disable the port or send a trap when user defined conditions occur Definable port conditions are link flap CRC Fragments and Duplex Mismatch Detection RM GUI RSPL Release
73. 08 The OpenSSL Project All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the following acknowledgment This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http www openssl org 4 The names OpenSSL Toolkit and OpenSSL Project must not be used to endorse or promote products derived from this software without prior written permission For written permission please contact openssl core openssl org 5 Products derived from this software may not be called OpenSSL nor may OpenSSL appear in their names without prior written permission of the OpenSSL Project 6 Redistributions of any form whatsoever must retain the following acknowledgment This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http www openssl org THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT AS IS AND ANY EXPRESS
74. 13 Diagnostics Parameters Transmit System Capabilities Max Neighbors FDB Mode 8 5 LLDP Meaning Specifies whether the device transmits a TLV Type Length Value with the system capabilities performance data Possible values Selected default setting The device transmits a TLV with the system capabilities Not selected The device does not transmit a TLV with the system capabilities Limits the number of neighboring devices to be recorded for this port Possible values 1 50 default setting 10 Defines which function the device uses to record neighboring devices on this port Possible values lidponly The device uses only LLDP data packets to record neighboring devices on this port macOnly The device uses learned MAC addresses to record neighboring devices on this port The device only uses the MAC address if there is no other entry in the address table FDB Forwarding Database for this port both The device uses LLDP data packets and learned MAC addresses to record neighboring devices on this port autoDetect default setting If the device receives LLDP data packets at this port the device works the same as with the 11dpOn1y setting Otherwise the device works the same as with the macOn1y setting Table 279 Table in the Diagnostics LLDP Configuration dialog cont Buttons Button Set Reload Help Meaning Transfers the changes to the volatile memory RAM of the device To permanent
75. 2 2013 Graphical User Interface E Operating Instructions The graphical user interface of the device is divided into the menu part left and the dialog part right 2QFR 0 E _ Te e Network Device Status Security Status IB Software ooo B Load Save Vv Alarm Start Time v Alarm Start Time F gt External Memory AlrmReason foo Coo E Port Contiguration z Restart System Data Device View 8 Security Name IRSP ECE55501 5560 Time Location Hirschmann RSP oseo Ej Network Security H amp Switching Contact Hirschmann Automation and Control GmbH A EJ a0sPriority Redundancy Device Type IRSP30 0803 Hv 0001 E Diagnostics Power Supply 1 present 8 Advanced Power Supply 2 present O Hep Uptime 0 day s 2 36 55 Temperature C L fo far T fro a J L g E E _sa Reload oading data ok Figure 2 Graphical user interface of the device RM GUI RSPL Release 2 0 02 2013 Graphical User Interface The menu shows the menu items When you click a menu item the user interface displays the corresponding dialog in the dialog area SQ E 00 bles Ely Basic Settings 6 System is Expand All ie U Collapse All Expand Node E F Back E ta p Forward Restart E 8 Security a Time H I Network Security 19 Switching H E aosiPriority Redundancy H 8 Diagnosti
76. 20 221 223 226 227 232 237 238 240 243 244 245 246 246 247 248 249 263 264 269 274 280 282 Contents 8 5 9 2 A 1 A 2 A 3 A 4 A 5 A 6 A 7 A 8 LLDP 8 5 1 Configuration 8 5 2 Topology Discovery Advanced DHCP L2 Relay 9 1 1 Configuration 9 1 2 Statistics Telnet Client Appendix Technical Data List of RFCs Underlying IEEE Standards Underlying IEC Norms Underlying ANSI Norms Maintenance Literature references mee of Integrated Software A 8 1 lighttpd A 8 2 Expat A 8 3 libcurl A 8 4 libssh2 A 8 5 OpenSSH A 8 6 OpenSSL A 8 7 Parts of the FreeBSD IP stack Index Readers Comments Further Support 284 284 288 293 294 295 297 298 299 300 301 303 304 305 306 307 308 308 309 310 311 312 322 325 327 330 333 RM GUI RSPL Release 2 0 02 2013 About this Manual About this Manual The GUI reference manual contains detailed information on using the graphical interface to operate the individual functions of the device The Command Line Interface reference manual contains detailed information on using the Command Line Interface to operate the individual functions of the device The Installation user manual contains a device description safety instructions a description of the display and the other information that you need to install the device The Basic Configuration user manual contains the informati
77. 30 1440 default setting 30 Table 209 Configuration frame in the Diagnostics Report Email Logging Global dialog RM GUI RSPL Release 2 0 02 2013 233 Diagnostics 8 2 Report Urgent Parameters Meaning Severity Shows the urgent severity level at or above which the device immediately sends an email alert Possible values emergency alert default setting critical error warning notice informational debug Subject Defines the email subject for a given message type Possible values 0 255 alphanumeric characters Table 210 Urgent frame in the Diagnostics Report Email Logging Global dialog Non Urgent Parameters Meaning Severity Shows the non urgent severity level at or above which the device stores the log in a buffer Configure the non urgent severity level below the urgent severity level The device sends the log as an email alert after a duration timeout or when the log buffer overflows Possible values emergency alert critical error warning default setting notice informational debug Subject Defines the email subject for a given message type Possible values 0 255 alphanumeric characters Table 211 Non Urgent frame in the Diagnostics Report Email Logging Global dialog RM GUI RSPL 234 Release 2 0 02 2013 Diagnostics Table Parameters Index Description IP Address TCP Port Security User ID Password Active 8 2 Report Meaning Shows a sequ
78. 6 Buttons RM GUI RSPL Release 2 0 02 2013 283 Diagnostics 8 5 LLDP 8 5 LLDP The device allows you to gather information about neighboring devices For this the device uses the Link Layer Discovery Protocol LLDP This information enables a network management station to map the structure of your network This menu allows you to configure the topology discovery and to display the information received in table form The menu contains the following dialogs Configuration Topology Discovery 8 5 1 Configuration This dialog allows you to configure the topology discovery for every device port Operation Parameters Meaning Operation If the function is switched on the topology discovery with LLDP is activated on the device Possible values On default setting Off Table 277 Operation frame in the Diagnostics LLDP Configuration dialog RM GUI RSPL 284 Release 2 0 02 2013 Diagnostics 8 5 LLDP Configuration Parameters Meaning Transmit Interval s Defines the interval in seconds at which the device transmits LLDP data packets Possible values 5 32768 default setting 30 Transmit Interval Defines the factor for determining the time to live value for the LLDP data Multiplier packets Possible values 2 10 default setting 4 The time to live value coded in the LLDP header results from multiplying this value with the value in the Transmit Interval s field Reinit Delay s Defines the delay i
79. 82 information Possible values Selected default setting Activates the sending of the Circuit ID with the Remote ID Not selected The device sends the Remote ID exclusively Defines the Remote ID components for this VLAN Possible values ip Defines the IP address of the device as the Remote ID mac default setting Defines the MAC address of the device as the Remote ID client id Defines the system name of the device as the Remote ID other Enter the user defined information in the Remote ID cell when using this value Shows the Remote ID for the VLAN Enter the identifier in the cell when configuring the Remote ID Type as other Table 287 VLAN tab in the Advanced DHCP L2 Relay Configuration dialog Buttons Button Set Reload Help Table 288 Buttons 296 Meaning Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Updates the fields with the values that are saved in the volatile memory RAM of the device Opens the online help RM GUI RSPL Release 2 0 02 2013 Advanced 9 1 DHCP L2 Relay 9 1 2 Statistics The device monitors the traffic on the ports and displays the results in tabular form This table is divided into various categories to aid you in traffic analysis Table Parameters Meaning Port Shows the number of the device port to which the table entry relates U
80. A network administrator uses the DHCP L2 Relay Agent to add DHCP client information required by a L3 Relay Agent and DHCP server to assign addresses and configuration to a client When active the relay adds Option 82 information configured in this dialog to the packets before it relays DHCP requests from the clients to the server The Option 82 fields provide unique information about the client and relay This unique identifier consists of a Circuit ID for the client and a Remote ID for the relay In addition to the type length and multicast fields the circuit identifier includes the VLAN ID unit number slot number and port number for the connected client The Remote ID consists of a type and length field and either a MAC address IP address client identifier or a user defined device description A client identifier is the user defined system name for the device The menu contains the following dialogs Configuration Statistics RM GUI RSPL 294 Release 2 0 02 2013 Advanced 9 1 DHCP L2 Relay 9 1 1 Configuration This dialog allows you to activate the relay function on an interface and VLAN When you activate this function on a port the device either relays the Option 82 information or drops the information on untrusted ports Furthermore the device allows you to define the VLAN remote identifier Operation Parameters Meaning Operation Activates deactivates the DHCP L2 Relay function globally on the device Possible valu
81. CT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE RM GUI RSPL Release 2 0 02 2013 311 Appendix A 8 Copyright of Integrated Software A 8 5 OpenSSH The licences which components of this software fall under are as follows First we will summarize and say that all components are under a BSD licence or a licence more free than that OpenSSH contains no GPL code 1 Copyright c 1995 Tatu Ylonen lt ylo cs hut fi gt Espoo Finland All rights reserved As far as am concerned the code have written for this software can be used freely for any purpose Any derived versions of this software must be clearly marked as such and if the derived work is incompatible with the protocol description in the RFC file it must be called by a name other than ssh or Secure Shell Tatu continues However am not implying to give any licenses to any patents or copyrights held by third parties and the software includes parts that are not under my direct control As far as know all included source code is used in accordance with t
82. D EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM DAMAGES OR OTHER LIABILITY WHETHER IN AN ACTION OF CONTRACT TORT OR OTHERWISE ARISING FROM OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE RM GUI RSPL Release 2 0 02 2013 309 Appendix A 8 Copyright of Integrated Software A 8 3 libcurl Copyright c 1996 2012 Daniel Stenberg lt daniel haxx se gt All rights reserved Permission to use copy modify and distribute this software for any purpose with or without fee is hereby granted provided that the above copyright notice and this permission notice appear in all copies THE SOFTWARE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM DAMAGES OR OTHER LIABILITY WHETHER IN AN ACTION OF CONTRACT TORT OR OTHERWISE ARISING FROM OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE Except as contained in this notice the name of a copyright holder shall not be used in advertising or otherwise to promote the sale use or other dealings in this Software without prior
83. Default setting RSPL including spaces and the following special characters 1 amp lt gt MP_ G Changes to this setting are immediately effective in the active CLI session V 24 Timeout min Defines the time in minutes after which the device automatically closes the session of a logged on user in the Command Line Interface via the V 24 interface when it has been inactive Possible values 0 160 default setting 5 The value 0 deactivates the function and the user remains logged on when inactive For Telnet and SSH you define the timeout in the Ssecurity Management Access Server dialog Table 71 Configuration frame in the Security Management Access CLI dialog Global tab page Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 72 Buttons RM GUI RSPL 92 Release 2 0 02 2013 Security 2 3 Management Access 2 3 12 CLI Login Banner This tab page allows you to replace the CLI start screen with your own text In the state on delivery the CLI start screen shows information about the device such as the software version and the device settings With the function on this tab page you deactivate this information an
84. ED OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL RM GUI RSPL 322 Release 2 0 02 2013 Appendix A 8 Copyright of Integrated Software DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN This product includes cryptographic software written by Eric Young eay cryptsoft com This product includes software written by Tim Hudson tjh cryptsoft com Original SSLeay License Copyright C 1995 1998 Eric Young eay cryptsoft com All rights reserved This package is an SSL implementation written by Eric Young eay cryptsoft com The implementation was written so as to conform with Netscapes SSL This library is free for commercial and non commercial use as long as the following conditions are aheared to The following conditions apply to all code found in this distribution be it the RC4 RSA lhash DES etc code not just the SSL code The SSL documentation included wi
85. Hello data packets Possible values pie The device uses this specified value see the Bridge column Forward Delay s Shows the delay time in seconds defined by the root bridge for status changes Possible values 4 30 The device uses this specified value see the Bridge column In the RSTP protocol the bridges negotiate a status change without a specified delay The STP protocol uses the parameter to delay the status change between the statuses disabled discarding learning forwarding Max Age Shows the maximum permissible branch length specified by the root bridge i e the number of devices to the root bridge Possible values 6 40 default setting 20 The STP protocol uses the parameter to specify the validity of STP BPDUs in seconds Table 187 Root column in Protocol Configuration Information frame in the Redundancy Spanning Tree Global dialog cont Parameters Meaning Bridge is Root Shows whether the device currently has the role of the root bridge Possible values Not selected Another device currently has the role of the root bridge Selected The device currently has the role of the root bridge Root Port Shows the number of the device port from which the current path leads to the root bridge If the device takes over the role of the root bridge the field shows the value 0 Table 188 Topology column in Protocol Configuration Information frame in the Redundancy Spanning
86. I RSPL Release 2 0 02 2013 197 QoS Priority Parameters Min Bandwidth 6 5 Queue Management Meaning Defines the minimum bandwidth for this traffic class when the device is processing the priority queues of the ports with Weighted Fair Queuing Possible values 0 100 default setting 0 The value entered in percent refers to the available bandwidth on the port When you switch off the Strict Priority function for all traffic classes the maximum bandwidth is available on the ports for the Weighted Fair Queuing The total of the bandwidths assigned to the individual traffic classes is a maximum of 100 The value 0 means that the device does not reserve any bandwidth for this traffic class Table 177 Table in the QoS Priority Queue Management dialog cont Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 178 Buttons 198 RM GUI RSPL Release 2 0 02 2013 Redundancy 7 Redundancy This menu allows you to configure and monitor the settings for redundancy mechanisms The Redundancy Configuration User Manual document contains detailed information that you require to select the suitable redundancy procedure and conf
87. IABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE RM GUI RSPL Release 2 0 02 2013 319 Appendix A 8 Copyright of Integrated Software Some code is licensed under an ISC style license to the following copyright holders Internet Software Consortium Todd C Miller Reyk Floeter Chad Mynhier Permission to use copy modify and distribute this software for any purpose with or without fee is hereby granted provided that the above copyright notice and this permission notice appear in all copies THE SOFTWARE IS PROVIDED AS IS AND TODD C MILLER DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS INNO EVENT SHALL TODD C MILLER BE LIABLE FOR ANY SPECIAL DIRECT INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE DATA OR PROFITS WHETHER IN AN ACTION OF CONTRACT NEGLIGENCE OR OTHER TORTIOUS ACTION ARISING OUT OF ORIN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE Some code is licensed under a MIT style license to the following copyright holders Free Software Foundation Inc Permission is hereby granted free of charge to any person obtaining a copy of this software and associated documentation files the Software to
88. ITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE 8 Portable OpenSSH contains the following additional licenses a md5crypt c md5crypt h THE BEER WARE LICENSE Revision 42 lt phk login dknet dk gt wrote this file As long as you retain this notice you can do whatever you want with this stuff If we meet some day and you think this stuff is worth it you can buy me a beer in return Poul Henning Kamp b snprintf replacement Copyright Patrick Powell 1995 This code is based on code written by Patrick Powell papowell astart com It may be used for any purpose as long as this notice remains intact on all source code distributions RM GUI RSPL 318 Release 2 0 02 2013 Appendix A 8 Copyright of Integrated Software c Compatibility code openbsd compat Apart from the previously mentioned licenses various pieces of code in the openbsd compat subdirectory are licensed as follows Some code is licensed un
89. L 132 Release 2 0 02 2013 Time 3 1 Basic Settings Parameters Meaning Month Defines the month Possible values none state on delivery jan feb mar apr mai jun jul aug sep oct nov dec Systemtime Defines the time Possible values 00 00 state on delivery lt HH MM gt Table 114 Summertime End frame in the Time Basic Settings dialog Daylight Saving Time tab page cont Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 115 Buttons RM GUI RSPL Release 2 0 02 2013 133 Time 3 2 SNTP 3 2 SNTP SNTP Simple Network Time Protocol is a procedure described in the RFC 4330 for time synchronization in the network The device allows you to synchronize the system time in the device as an SNTP client As the SNTP server the device makes the time information available to other devices The menu contains the following dialogs Client Server 3 2 1 Client With this dialog you can define the settings with which the device operates as an SNTP client An an SNTP client the device obtains the time information from both SNTP servers and NTP servers and synchronizes the local clock with the time of the time
90. Log 8 2 Report The device logs important device internal events in a log file system log This dialog displays the log file system log The dialog allows you to search the log file for search terms and save them in HTM The log file is kept until a cold start is performed on start the device creates the file again To delete the logged events from the log file click Basic Settings Restart dialog L format on your PC the device After the cold Delete Log Fileinthe Buttons Button Meaning Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Search Opens the Search dialog The dialog allows you to search the log file for search terms or regular expressions Save Opens the Save dialog The dialog allows you to save the log file in HTML format on your PC Delete Log File Removes the logged events from the log file Help Opens the online help Table 226 Buttons 244 RM GUI RSPL Release 2 0 02 2013 Diagnostics 8 2 Report 8 2 8 Audit Trail The device logs system events and writing user actions on the device This gives you the option of following WHO changes WHAT on the device WHEN The logged entries are write protected and remain saved in the device after a cold reset This dialog displays the log file audit trail The dialog allows you to search the log file for search terms and save them in HTML format on your PC The device logs the followin
91. MP Snooping dialog Delete Log File Removes the logged events from the log file see the Diagnostics Report System Log dialog Table 35 Buttons RM GUI RSPL Release 2 0 02 2013 57 Basic Settings 1 7 Restart Button Meaning Delete Persistent Removes the log files from the external memory see the Log File Diagnostics Report Persistent Logging dialog Help Opens the online help Table 35 Buttons cont RM GUI RSPL 58 Release 2 0 02 2013 Security 2 Security This menu allows you to define the settings for the access to the device The menu contains the following dialogs User Management Authentication List Management Access Port Security 802 1X Port Authentication RADIUS Pre login Banner RM GUI RSPL Release 2 0 02 2013 59 Security 2 1 User Management 2 1 User Management The device allows users to access its management functions when they log in with valid login data The device authenticates the users either using the local user management or with a RADIUS server in the network In this dialog you manage the users of the local user management You also define the following settings here Settings for the login Settings for saving the passwords Define policy for valid passwords Configuration This frame allows you to define settings for the login Parameters Meaning Number of Login Number of login attempts possible Attempts Possible values 0 5 default setting 0 If the user makes on
92. P BPDUs on off on the device port With this setting the device helps you protect your network from incorrect configurations or attacks with STP BPDUs that try to change the topology This setting is only relevant for device ports with the STP role designated Possible values Not selected default setting The monitoring of STP BPDUs is switched off Selected The monitoring of STP BPDUs is switched on Ifthe device port receives an STP BPDU with better path information to the root bridge the device discards the STP BPDU and sets the state of the device port to the value discarding instead of to root Ifthere are no STP BPDUs with better path information to the root bridge after 2 x Hello Time the device resets the state of the device port to a value according to the port role If you switch on the Root Guard function while the Loop Guard function is switched on the device switches off the Loop Guard function TCN Guard Switches the monitoring of Topology Change Notifications on off on the device port With this setting the device helps you protect your network from attacks with STP BPDUs that try to change the topology Possible values Not selected default setting The monitoring of Topology Change Notifications is switched off If the device receives STP BPDUs with a Topology Change flag it deletes the address table FDB of the device port and forwards the Topology Change Notifications Selected The
93. PDU Guard function is switched on Shows whether the device port has received an STP BPDU as an edge port terminal device port Possible values disable The device port is an edge port terminal device port and has not received any STP BPDUs or the device port is not an edge port enable The device port is an edge port terminal device port and has received an STP BPDU The device deactivates the device port In the Basic Configuration Port Configuration dialog the checkbox in the Port on column is Not selected for this port To reset the status of the device port to the value forwarding you proceed as follows E O If the device port is still receiving BPDUs On the CIST tab page remove the selection from the checkbox in the Admin Edge Port column or Inthe Redundancy Spanning Tree Global dialog remove the selection in the BPDU Guard checkbox To activate the device port in the Basic Configuration Port Configuration dialog select the checkbox in the Port on column for this device port Table 191 Guards tab page in the Redundancy Spanning Tree Port dialog section x3c tblsheetnum gt of 3 Buttons Button Set Reload Help Table 192 Buttons RM GUI RSPL Release 2 0 02 2013 Meaning Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save U
94. Port Control column The authentication server assigns the timeout period to the device via RADIUS The value 0 means that the authentication server has not assigned a timeout Termination Action Shows the action performed by the device when the login has elapsed Possible values default reauthenticate Table 88 Table in the Security 802 1X Port Authentication Port Clients dialog cont Buttons Button Meaning Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 89 Buttons RM GUI RSPL 110 Release 2 0 02 2013 Security 2 5 802 1X Port Authentication 2 5 4 Statistics This dialog shows which EAPoL data packets the terminal device has sent and received for the authentication of the terminal devices Table Parameters Port Received Frames Transmitted Frames Start Frames Logoff Frames Response ID Frames Response Frames Request ID Frames Request Frames Invalid Frames Error Frames Frame Version Frame Source Meaning Shows the number of the device port to which the table entry relates Shows the total number of EAPOL data packets that the device received on the port Shows the total number of EAPOL data packets that the device sent on the port Shows the number of EAPOL start data packets that the device received on the port Shows the number of EAPOL logoff data packets that the device received on the port Sho
95. RAM of the device Help Opens the online help Table 87 Buttons 2 5 3 Port Clients This dialog shows information on the connected terminal devices Table Parameters Meaning Port Shows the number of the device port to which the table entry relates User Name Shows the user name with which the terminal device logged in MAC Address Shows the MAC address of the terminal device Assigned VLAN ID Shows the VLAN ID that the authenticator assigned to the port after the successful authentication of the terminal device If the value macBased is specified for the port in the Security 802 1X Port Authentication Port Configuration dialog Port Control column The device assigns the VLAN tag based on the MAC address of the terminal device when it receives data packets without a VLAN tag Table 88 Table in the Security 802 1X Port Authentication Port Clients dialog RM GUI RSPL Release 2 0 02 2013 109 Security 2 5 802 1X Port Authentication Parameters Meaning Assignment Shows the reason for the assignment of the VLAN Reason Possible values default radius unauthenticatedVLAN guestVlan monitorVlan invalid The field only shows a valid value as long as the client is authenticated Session Timeout Shows the remaining time in seconds until the login of the terminal device expires This value only applies if the value auto is specified for the port in the Security 802 1X Port Authentication Port Configuration dialog
96. Rate condition produces a disable port action Possible values Selected Enables the ports after the user defined time elapses Not selected default setting The ports remain disabled Table 244 Configuration frame in the Diagnostics Ports Auto Disable dialog Table Parameters Port Reset Timer s Remaining Time s Component Reason Meaning Shows the number of the device port to which the table entry relates Timer value in seconds after which the device reactivates a deactivated port Possible values 30 4294967295 0 default setting A value of 0 disables the timer Remaining time in seconds until the reactivation of the port Shows the name of the component that caused the port to disable itself Shows the reason the port disabled itself Table 245 Table in the Diagnostics Ports Auto Disable dialog RM GUI RSPL Release 2 0 02 2013 259 Diagnostics 8 3 Ports Parameters Meaning Active Shows the operational status of the function for the port Possible values Selected The Auto Disable function shuts down the port Not selected default setting The port is active Table 245 Table in the Diagnostics Ports Auto Disable dialog cont Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the
97. SNTP versions on the client and the server are incompatible with each other synchronization failed Activates deactivates the connection to the SNTP server Possible values Selected default value The connection to the SNTP server is activated The SNTP client has access to the SNTP server Not selected The connection to the SNTP server is deactivated The SNTP client has no access to the SNTP server Table 119 Table in the Time SNTP Client dialog cont RM GUI RSPL Release 2 0 02 2013 137 Time 3 2 SNTP Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Create Adds a new table entry Remove Removes the selected table entry Help Opens the online help Table 120 Buttons RM GUI RSPL 138 Release 2 0 02 2013 Time 3 2 SNTP 3 2 2 Server With this dialog you can define the settings with which the device operates as an SNTP server The SNTP server provides the Universal Time Coordinated UTC without considering local time differences If the configuration is such the SNTP server operates in Broadcast mode In Broadcast mode the SNTP server automatically sends Broadcast messages or Multicast messages according to the Broadcast send interval Operati
98. Tree Global dialog RM GUI RSPL Release 2 0 02 2013 209 Redundancy 7 2 Spanning Tree Parameters Meaning Root Path Cost Shows the path cost for the path that leads from the root port of the device to the root bridge of the layer 2 network Possible values 0 200000000 0 The device takes over the role of the root bridge Topology Change Shows how often the device has put a device port into the forwarding Count status via Spanning Tree since it was started Time Since Shows the time since the last topology change Topology Change Possible values lt days hours minutes seconds gt Table 188 Topology column in Protocol Configuration Information frame in the Redundancy Spanning Tree Global dialog cont Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 189 Buttons 7 2 2 Port With this dialog you can switch the Spanning Tree function on off on the device ports specify edge ports and define the settings for various protection functions RM GUI RSPL 210 Release 2 0 02 2013 Redundancy 7 2 Spanning Tree CIST On this tab page you can switch the Spanning Tree function on off on the device ports individually def
99. X default setting on TP ports Full duplex connection 1000 Mbit s FDX default setting on optical ports Full duplex connection The operating modes actually available depend on the corresponding media module Link Current Displays the currently set operating mode of the device port Settings g Possible values No cable connected no link 10 Mbit s HDX Half duplex connection 10 Mbit s FDX Full duplex connection 100 Mbit s HDX Half duplex connection 100 Mbit s FDX Full duplex connection 1000 Mbit s FDX Full duplex connection Manual Cable Defines the devices connected to a TP port Crossing Auto Prerequisite The automatic configuration of the device port is deactivated Conf off Possible values mdi The device switches the send and receive line pairs at the device port mdix default setting on TP ports The device does not switch any line pairs at the device port auto mdix The device detects the send and receive line pairs of the connected device and automatically adapts to them Example When you connect a terminal device with a crossed cable the device automatically resets the port from MDIX to MDI unsupported default setting on optical ports or TP SFP ports The device port does not support this function Table 32 Table in the Basic Settings Port Configuration dialog section x3c tblsheetnum gt of 4 RM GUI RSPL Release 2 0 02 2013 55 Basic Settings 1 6 Port Configuration Parame
100. X Global Port Configuration Port Clients Statistics Port Authentication History Integrated Authentication Server RM GUI RSPL Release 2 0 02 2013 101 Security 2 5 802 1X Port Authentication 2 5 1 802 1X Global With this dialog you can define basic settings for the port based access control Operation Parameters Meaning Operation When this function is switched on the device checks the access to the network from connected terminal devices Possible values On The port based access control is activated off default setting The port based access control is deactivated n Table 82 Operation frame in the Security 802 1X Port Authentication Global dialog Configuration Parameters Meaning Activate VLAN When this function is switched on the RADIUS authentication server Assignment assigns the relevant device port to a VLAN This function allows you to provide selected services to the connected terminal device in this VLAN Possible values Not selected default setting The function is deactivated The relevant device port is assigned to the VLAN specified in the Security 802 1X Port Authentication Port Configuration dialog Assigned VLAN ID column Selected The function is activated If the terminal device successfully authenticates itself the device assigns to the relevant device port the VLAN ID transferred by the RADIUS authentication server Table 83 Configuration frame in the Security 802 1X
101. X via an authentication server To do this you assign the radius policy to the 8021x list in the Security Authentication List dialog The menu contains the following dialogs Global Authentication Server Accounting Server Authentication Statistics Accounting Statistics RM GUI RSPL 116 Release 2 0 02 2013 Security 2 6 RADIUS 2 6 1 Global This dialog allows you to define basic settings for RADIUS RADIUS Configuration Parameters Max Number of Retransmits Timeout s Enable Accounting Mode NAS IP Address Attribute 4 Meaning Defines how often the device retransmits an unanswered request to the authentication server before the device sends the request to an alternative authentication server Possible values 1 15 default setting 4 Defines how many seconds the device waits for a response after a request to an authentication server before it retransmits the request Possible values 1 30 default setting 5 Switches the accounting function on off Possible values Not selected default setting The accounting function is switched off Selected The accounting function is switched on The active server specified in the Security RADIUS Accounting Server records the traffic data that occurs during the authentication and the authorization Defines the IP address that the device transfers to the authentication server as attribute 4 Enter the IP address of the device or another freely selectabl
102. ab page cont Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 75 Buttons RM GUI RSPL 94 Release 2 0 02 2013 Security 2 4 Port Security 2 4 Port Security The device allows you to only transmit data packets from desired senders When this function is switched on the device checks the VLAN ID and MAC address of the sender before it transmits a data packet The device discards data packets from other senders and logs this event This restriction makes MAC Spoofing attacks more difficult In this dialog a Wizard helps you to connect the device ports with one or more desired senders In the device these addresses are known as Static Addresses To keep the setup process as simple as possible the device allows you to record the desired senders automatically The device learns the senders by evaluating the received data packets In the device these addresses are known as Dynamic Addresses When a user defined upper limit has been reached Dynamic Limit the device stops the learning on the relevant port and only transmits the data packets of the senders already recorded When you adjust the upper limit to the number of expected s
103. access control according to IEEE 802 1X the device only allows connected terminal devices to access the network when they log in with valid login data The device authenticates the terminal devices either with a RADIUS server in the network or with an integrated authentication server implemented in the device In this dialog you manage the authentication lists In a list you define which method the device uses for the authentication Here you have the option to differentiate the application with which the device is accessed e g via a console or with the graphical user interface Table Parameters Meaning Name Shows the name of the list To create a new list you click Create Table 41 Table in the Security Authentication List dialog RM GUI RSPL Release 2 0 02 2013 67 Security Parameters Policy 1 Policy 2 Policy 3 Policy 4 Policy 5 Dedicated Applications Active 2 2 Authentication List Meaning Shows the authentication method that the device uses for access via the application specified in the Dedicated Applications field To change the value click the relevant field The device gives you the option of a fall back solution For this you specify one other method in each of the Policy 2 to Policy 5 fields If the authentication with the specified method is not successful the device uses the next policy Possible values local The device authenticates the users by using the local user management see th
104. afterwards you open the Basic Settings Load Save dialog and click Save Updates the fields with the values that are saved in the volatile memory RAM of the device Opens the online help 165 Switching 5 4 2 5 4 IGMP IGMP Snooping Enhancements With this dialog you can select a port for a VLAN ID and configure this port Table Parameters VLAN ID Port Meaning Shows the ID of the VLAN to which the table entry applies Possible values 1 4042 VLAN IDs that are set up Shows for every VLAN set up in the device whether the relevant device port is a query port Additionally the field shows whether the device transmits all the Multicast streams in the VLAN to this port Possible values The port is not a query port in this VLAN A Automatic The device has detected the port as a query port A prerequisite is that the port is configured as Learn by LLDP L Learned The device has detected the port as a query port because the port has received IGMP queries in this VLAN The port is not a statically configured query port ALA Learn by LLDP can be set A user has configured the port as Learn by LLDP With LLDP Link Layer Discovery Protocol the device detects Hirschmann devices connected directly to the port The device denotes the detected query ports with A You configure a portas Learn by LLDP by selecting the Learn by LLDP checkbox on the Configuration page in the Wizard FA Forward
105. alog for the monitored functions The device displays the detected fault with the higher priority when 2 or more detected faults occur at the same time The order of the functions listed in the Monitoring frame represents the monitor priority Meaning that the higher a function appears at the top of the list the higher the priority When you repair the displayed detected fault the device displays the next higher detected fault Security Status Parameters Meaning Security Status Shows the current status of the security relevant settings in the device The device determines the status from the individual monitored parameters Possible values Error OK Table 257 Security Status frame in the Diagnostics Status Configuration Security Status dialog RM GUI RSPL Release 2 0 02 2013 269 Diagnostics 8 4 Status Configuration Trap Configuration Parameters Meaning Generate Trap Activates deactivates the sending of an SNMP message trap when the value in the Security Status field changes Possible values Selected The device sends a trap Not selected default setting The device does not send a trap The prerequisite for sending SNMP messages traps is that the function is switched on in the Diagnostics Alarms Traps dialog and atleast 1 SNMP manager is defined Table 258 Trap Configuration frame in the Diagnostics Status Configuration Security Status dialog Monitoring Parameters Meaning Default Passwords De
106. alphanumeric characters Activates deactivates the user account Possible values Selected The user account is active The user accepts the login of a user with this user name Not selected The user account is inactive The user rejects the login of a user with this user name Table 39 New Entry frame in the Security User Management dialog section x3c tblsheetnum gt of 3 64 RM GUI RSPL Release 2 0 02 2013 Security 2 1 User Management Parameters Meaning Password Specifies the password with which the user logs in When the checkbox in the Display Password field is selected the password is visible in clear text Possible values 6 64 alphanumeric characters including the following special characters 1 amp lt gt M The minimum length of the password is defined in the Password Policy frame The device differentiates between upper and lower case When the checkbox in the Policy Check field is selected the device checks the password according to the policy defined in the Password Policy frame The device always checks the minimum length of the password even if the checkbox in the Policy Check field is not selected Display Password Specifies how the adjacent Password field displays the password Possible values Not selected default setting The Password field displays asterisks instead of the password Selected The Password field displays the password in clear
107. and 100 if the value percent is selected in the Threshold Unit column O Enter an absolute value for the data rate if the value pps is selected in the Threshold Unit column The rate limiter function calculates the threshold based on data packets sized 512 bytes Defines the unit for the threshold value Possible values percent default setting The threshold value is entered as a percentage of the data rate of the port pps The threshold value is entered in data packets per second Activates deactivates the rate limiter function for received Broadcast data packets Possible values Not selected default setting Selected If the threshold value is exceeded the device discards the excess Broadcast data packets on this port Activates deactivates the rate limiter function for received Multicast data packets Possible values Not selected default setting Selected If the threshold value is exceeded the device discards the excess Multicast data packets on this port Activates deactivates the rate limiter function for received Unicast data packets with an unknown destination address Possible values Not selected default setting Selected If the threshold value is exceeded the device discards the excess Unicast data packets on this port Table 131 Table in the Ingress tab of the Switching Rate Limiter dialog cont 154 RM GUI RSPL Release 2 0 02 2013 Switching 5 2 Rate Limiter
108. and the password matches the password stored in the device Shows the settings of the configuration profile selected in the table in clear text as an XML If the configuration profile is encrypted enter the password in order to see the settings in clear text Copies the configuration profile selected in the table and saves it with a user defined name in the non volatile memory NVM The device designates the new configuration profile as Selected Note Before creating additional configuration profiles decide for or against permanently activated configuration encryption in the device Save additional configuration profiles either unencrypted or encrypted with the same password If the checkbox in the Auto save config on ENVM field is selected in the Basic Settings External Memory dialog the device also designates the configuration profile with the same name on the external memory as Selected Table 29 Buttons section x3c tblsheetnum gt of 5 48 RM GUI RSPL Release 2 0 02 2013 Basic Settings 1 4 Load Save Button Meaning Back to factory Resets the settings in the device to the factory settings defaults The device deletes the saved configuration profiles from the volatile memory RAM and from the non volatile memory NVM If an external memory is connected the device deletes the configuration profiles saved on the external memory ENVM After a brief period the device restarts and loads the factory settin
109. ates the Snooping Querier in the selection process if the device detects other queriers in the VLAN Possible values off default setting Active If the Snooping Querier detects a querier source address that is better i e smaller than the existing one the device stops sending out queries The Snooping Querier that wins the selection process continues sending out the queries Table 151 Table in the switching IGMP Querier dialog RM GUI RSPL Release 2 0 02 2013 171 Switching 5 4 IGMP Parameters Meaning Address Defines the IP address that the device adds as the sender address in generated general query data packets You use the address of the Multicast router Possible values Valid IP Multicast address default setting 0 0 0 0 Protocol Version Shows the IGMP protocol version of the general query data packets Possible values 1 IGMP v1 2 IGMP v2 default setting 3 IGMP v3 Max Response Shows the time in seconds in which the members of a Multicast group Time should respond to a query data packet For their response the members select a random time within the response time This helps to prevent all the Multicast group members from responding to the query at the same time In the Max Response Time field select a value smaller than the value in the Group Membership Interval field Possible values 1 25 default setting 10 Last Querier Shows the IP address of the Multicast router from which the
110. ates the security status if you have selected the Security Status option field in the Signal Contact Mode frame Parameters Contact Meaning Shows the status of the signal contact The signal contact indicates the device status or the security status Possible values Opened Error The signal contact is opened The current status of the device has the value Error or The current status of the security relevant settings in the device has the value Error Closed OK Normal status The signal contact is closed Table 266 Status frame in the Diagnostics Status Configuration Signal Contact dialog Propagate Connection Error table Parameters Port Propagate Connection Error Meaning Shows the number of the device port to which the table entry relates Defines whether the signal contact monitors the link status of the device port Possible values Selected The signal contact opens if the link on this device port is interrupted Not selected default setting The signal contact remains closed if the link on this device port is interrupted This setting is only effective if you have selected the value Monitor inthe Connection error field of the Monitoring correct Operation frame Table 267 Propagate Connection Error table in the Diagnostics Status Configuration Signal Contact dialog 278 RM GUI RSPL Release 2 0 02 2013 Diagnostics 8 4 Status Configuration Propagate Sta
111. ation dialog There you enter the User and Password to login to the server scp orsftp lt user gt lt password gt lt IP address gt lt path gt lt file name gt Shows the Open dialog If the image file is located on your PC or ona network drive you select the image file here Updates the device software In the process the device copies the selected file into the flash memory and replaces the device software stored there The device copies the existing Stored Version of the device software into the backup area The device loads the updated device software during the next restart and Table 21 Software Update frame in the Basic Settings Software dialog 36 RM GUI RSPL Release 2 0 02 2013 Basic Settings Table Parameters File Location Index File name Firmware Applet Logic 1 3 Software Meaning Shows the storage location of the device software Possible values RAM Volatile memory of the device FLASH Non volatile memory NVM of the device SD CARD External SD memory ACA31 Shows the index of the device software Shows the device internal file name of the device software Shows the version number and creation date of the device software Shows the version number of the graphical user interface GUI Shows the version number of the logic module for devices with programmable hardware FPGA Table 22 Table in the Basic Settings Software dialog Bu
112. automatically updates the display of the dialog every 100 seconds In the process it updates the fields and symbols with the values that are saved in the volatile memory RAM of the device At the bottom left of the dialog you will find the time of the next update Reloading data in 70s Figure 5 Time to next Reload Note The graphical user interface uses this function to update only the display in the Basic Settings System dialog Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 7 Buttons RM GUI RSPL 24 Release 2 0 02 2013 Basic Settings 1 2 Network 1 2 Network This dialog allows you to define settings for the access to the device management via the network In addition you see the addresses of the neighboring devices attached to the device and can detect and resolve address conflicts The menu contains the following dialogs Global ARP Table IP Address Conflict Detection RM GUI RSPL Release 2 0 02 2013 25 Basic Settings 1 2 Network 1 2 1 Global This dialog allows you to define basic settings with which you access the device management via the network Management interface This frame allows you to define the followin
113. belden com in the Asia Pacific region at Tel 65 6854 9860 E mail inet ap belden com Hirschmann Competence Center The Hirschmann Competence Center is ahead of its competitors Consulting incorporates comprehensive technical advice from system evaluation through network planning to project planning Training offers you an introduction to the basics product briefing and user training with certification The current technology and product training courses can be found at http www hicomcenter com Support ranges from the first installation through the standby service to maintenance concepts RM GUI RSPL Release 2 0 02 2013 333 Further Support With the Hirschmann Competence Center you have decided against making any compromises Our client customized package leaves you free to choose the service components you want to use Internet http www hicomcenter com RM GUI RSPL 334 Release 2 0 02 2013 Further Support RM GUI RSPL Release 2 0 02 2013 335 fh HIRSCHMANN A BELDEN BRAND
114. ble values 0 4096 default setting 1024 The value 0 deactivates saving of log entries in the log file Max Files Defines the number of log files that the device keeps on the external memory As soon as the specified maximum number of files has been attained the device deletes the oldest file and renames the remaining files Possible values 0 25 default setting 4 The value 0 deactivates saving of log entries in the log file Severity Defines the minimum severity of the events The device saves the log entry for events with this severity and with more urgent severities in the log file on the external memory Possible values emergency alert critical error warning default setting notice informational debug Target Defines the external memory device for logging Possible values sd Table 220 Configuration frame in the Diagnostics Report Persistent Logging dialog RM GUI RSPL Release 2 0 02 2013 241 Diagnostics 8 2 Report Table Parameters Meaning Index Shows a sequential number to which the table entry relates Possible values De 2D The device automatically defines this number File Name Shows the file name of the log file on the external memory Possible values messages messages X File Size Shows the size of the log file on the external memory in bytes Table 221 Table in the Diagnostics Report Persistent Logging dialog To delete the log files click Delete Persistent Log File in the Bas
115. ble values Selected The device monitors the port for the conditions configured in the Link Flap table When the configured condition occurs the device performs the action selected in the Action column Not selected default setting Activates deactivates the conditions configured in the CRC Fragments tab to trigger an action Possible values Selected The device monitors the port for the conditions configured in the CRC Fragments table When the configured condition occurs the device performs the action selected in the Action column Not selected default setting Activates deactivates the duplex mismatch condition to trigger an action Possible values Selected The device monitors the port for a duplex mismatch When a duplex mismatch occurs the device performs the action selected in the Action column Not selected default setting Shows which configured condition caused an action to occur Possible values Link Flap CRC Fragments Duplex Missmatch Defines an action to perform when the user defined port monitor conditions occur Possible values Disable port default setting When the port monitor conditions occur the device disables the port To enable the port again click Reset Send trap The device sends a trap to the management station The prerequisite for sending SNMP messages traps is that you turn on the function in the Diagnostics Status Configuration Alarms Traps dialog and you define at leas
116. blsheetnum gt of 4 RM GUI RSPL Release 2 0 02 2013 211 Redundancy 7 2 Spanning Tree Parameters Meaning Port Role Shows the current role of the device port in CIST Possible values root Device port with the cheapest path to the root bridge alternate Device port with the alternative path to the root bridge currently interrupted designated Device port for the side of the tree averted from the root bridge backup Device port receives STP BPDUs from its own device disabled The device port is switched off See the Basic Settings Port Configuration dialog Port Path Cost Defines the path cost of the device port Possible values 0 200000000 default setting 0 If the value is 0 the device automatically calculates the path costs depending on the data rate of the device port Port Priority Defines the priority of the device port Possible values 16 240 in steps of 16 default setting 128 This value represents the first 4 bits of the port ID Received Bridge ID Shows the bridge ID of the device from which this device port last received an STP BPDU Possible values For device ports with the designated role the device displays the information for the STP BPDU last received by the port This helps to diagnose the possible STP problems in the network For the alternate backup master and root port roles in the stationary condition static topology this information is identical to the information of the desi
117. cally compares the configuration profiles once a minute To refresh the display manually click the button If the device configurations match the button is hidden By right clicking this symbol you can open the Basic Settings Load Save dialog directly When you position the mouse pointer over the button the user interface opens a bubble help with the following information The Last Update section shows the time at which the device last refreshed the values The Device Status section shows a compressed view of the Device Status frame in the Basic Settings System dialog The section shows the alarm that is currently active and whose occurrence was recorded first The Security Status section shows a compressed view of the Security Status frame in the Basic Settings System dialog The section shows the alarm that is currently active and whose occurrence was recorded first The Boot Parameter section shows a note if you permanently save changes to the device configuration and at least one boot parameter differs from the device configuration used during the last restart The following settings cause the boot parameters to change Basic Settings External Memory dialog Enable Automatic Software Update parameter Basic Settings External Memory dialog Config Priority parameter Security Management Access Server dialog SNMP tab page Port Number parameter Diagnostics System Selftest dialog RAM Test
118. ce deactivates the device port In the Basic Configuration Port Configuration dialog the checkbox in the Port on column is Not selected for this device port To reset the status of the device port to the value forwarding you proceed as follows L Ifthe device port is still receiving BPDUs Onthe CIST tab page remove the selection from the checkbox in the Admin Edge Port column or Inthe Redundancy Spanning Tree Global dialog remove the selection in the BPDU Guard checkbox O To activate the device port in the Basic Configuration Port Configuration dialog select the checkbox in the Port on column for this device port Table 186 Protocol Configuration Information frame Bridge column in the Redundancy Spanning Tree Global dialog section x3c tblsheetnum gt of 3 Parameters Meaning Bridge ID Shows the bridge ID of the current root bridge Possible values lt Bridge priority gt lt MAC address gt The bridge ID is made up of the bridge priority and the MAC address Priority Shows the bridge priority of the current root bridge Possible values 0 61440 in steps of 4096 Table 187 Root column in Protocol Configuration Information frame in the Redundancy Spanning Tree Global dialog RM GUI RSPL 208 Release 2 0 02 2013 Redundancy 7 2 Spanning Tree Parameters Meaning Hello Time s Shows the time in seconds defined by the root bridge between the sending of two configuration messages
119. ch the device waits for a query on this port If the port does not receive a query data packet the device removes the port from the list of ports with connected Multicast routers Possible values 2 3600 default setting 260 The value 0 means an unlimited timeout no expiration time Activates deactivates the Fast Leave function for this port Possible values off default setting When the Fast Leave function is switched off the device first sends MAC based queries to the members of the Multicast group and only removes an entry when a port does not send any more report messages Active If the device receives an IGMP Leave message from a Multicast group when the Fast Leave function is switched on it removes the entry immediately from its address table Configures the port as a static query port in all VLANs Possible values off default setting The port is is not configured as a static query port The device only transmits IGMP report messages to the port when it receives IGMP queries Active The port is configured as a static query port Table 140 Interface tab in the Switching IGMP IGMP Snooping dialog section x3c tblsheetnum gt of 3 RM GUI RSPL Release 2 0 02 2013 163 Switching 5 4 IGMP Parameters Meaning VLAN IDs Shows the ID of the VLAN to which the table entry applies Possible values 4042 VLAN IDs that are set up Table 140 Interface tab in the Switching IGMP IGMP Snooping dialog s
120. col uses the parameter to specify the validity of STP BPDUs in seconds Limits the maximum transmission rate for sending BPDUs Possible values 1 10 default setting 10 When the device sends a BPDU it increments a counter at this device port When the counter reaches the value specified here the device port stops sending any more BPDUs On the one hand this reduces the load generated by RSTP and on the other a loop may be caused when BPDUs are not received The device decrements the counter by 1 every second In the following second the device sends a maximum of 1 new BPDU Table 186 Protocol Configuration Information frame Bridge column in the Redundancy Spanning Tree Global dialog section x3c tblsheetnum gt of 3 RM GUI RSPL Release 2 0 02 2013 207 Redundancy 7 2 Spanning Tree Parameters Meaning BPDU Guard Switches the BPDU Guard function in the device on off With this function the device helps protect your network from incorrect configurations attacks with STP BPDUs and undesired topology changes Possible values Not selected default setting The BPDU Guard function is switched off selected The BPDU Guard function is switched on The device activates the function for manually defined edge ports terminal device ports On the CIST tab page the checkbox in the Admin Edge Port column is Selected for these device ports If an edge port receives an STP BPDU the devi
121. configurations Load default config Activates deactivates the loading of the standard device configuration on error default configuration if no readable device configuration is available for the device when it is restarting Possible values Selected default setting The device loads the standard device configuration Not selected The device interrupts the restart and stops To get access to the device again use a V 24 link to switch to the system monitor and load the standard device configuration there Table 197 Configuration frame in the Diagnostics System Selftest dialog RM GUI RSPL Release 2 0 02 2013 223 Diagnostics 8 1 System Note The following settings block your access to the device permanently if no readable device configuration is available for the device when it is restarting This is the case for example if the password for the device configuration to be loaded differs from the password set in the device Activate SysMon1 checkbox is not selected Load default config on error checkbox is not selected To have the device unlocked again contact your sales partner Table In this table you define how the device behaves in the case of an error Parameters Meaning Cause Error causes to which the device reacts Possible values task The device detects errors in the applications executed e g if a task terminates or is not available resource The device detects errors in the resources available e g if the m
122. contributed by CORE SDI S A under a BSD style license Cryptographic attack detector for ssh source code Copyright c 1998 CORE SDI S A Buenos Aires Argentina All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that this copyright notice is retained THIS SOFTWARE IS PROVIDED AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES ARE DISCLAIMED IN NO EVENT SHALL CORE SDI S A BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OR MISUSE OF THIS SOFTWARE Ariel Futoransky lt futo core sdi com gt lt http www core sdi com gt 3 ssh keyscan was contributed by David Mazieres under a BSD style license Copyright 1995 1996 by David Mazieres lt dm lcs mit edu gt Modification and redistribution in source and binary forms is permitted provided that due credit is given to the author and the OpenBSD project by leaving this copyright notice intact RM GUI RSPL 314 Release 2 0 02 2013 Appendix A 8 Copyright of Integrated Software 4 The Rijndael implementation by Vincent Rijmen Antoon Bosselaers and Paulo Barreto is in the public domain and distributed with the following license version 3 0 December 2000 Optimised ANSI C code for the Rijndael cipher now AES author Vincent Rijmen lt vincent rijimen esat kuleuven ac be gt author Ant
123. cs Flr Advanced A Help gt gt Figure 3 Menu section with context menu You right click the menu section to open the context menu Designation Expand All Collaps All Expand Node Back Forward Meaning Expands the nodes in the menu tree The menu section shows the menu items for all levels Collapses the nodes in the menu tree The menu section shows the menu items for the top level Expands the selected node and collapses the other nodes in the menu tree This function allows you to expand a main node without scrolling and without collapsing other nodes manually Allows you to quickly jump back to a previously selected menu item Allows you to quickly jump forward to a previously selected menu item when you have previously used the Back function Table 1 Menu section Functions in the context menu 14 RM GUI RSPL Release 2 0 02 2013 Graphical User Interface The status line is located in the top part of the menu section 3 FHE ly 9 Figure 4 Status line The status line contains the following buttons Button Function Refreshes the status line The buttons show the values loaded from the volatile memory RAM of the device o Terminates the refreshing of the status line When you position the mouse pointer over the button the user interface opens 3 a bubble help with the following information The time at which the device last refreshed the values Name of the user
124. ction mode function If the Send Trap function is switched on it sends an SNMP message trap Off The continuous address conflict detection is switched off Detection Delay Defines the period in milliseconds for which the device waits for a ms response after sending an ARP data packet Possible values 20 500 default setting 200 Release Delay s Defines the period in seconds after which the device checks again whether the address conflict still exists Possible values 3 3600 default setting 15 Number of Address Defines how often the device sends gratuitous ARP data packets in the Protections passive detection mode to defend its IP address Possible values 0 100 default setting 3 Protection Defines the period in milliseconds after which the device sends gratuitous Interval ms ARP data packets again in the passive detection mode to defend its IP address Possible values 20 5000 default setting 200 Send Trap Activates deactivates the sending of an SNMP message trap when the device detects an address conflict during the periodic address conflict detection Possible values Selected The device sends an SNMP message Not selected default setting The device does not send an SNMP message The prerequisite for sending SNMP messages traps is that the function is switched on in the Diagnostics Status Configuration Alarms Traps dialog and at least 1 SNMP manager is defined Table 16 C
125. ctivated You can access the management functions of the device via HTTP Table 50 Operation frame in the Securi ty Management Access Server dialog HTTP tab page Configuration Parameters Meaning Listen TCP Port Defines the number of the TCP port on which the server receives requests from clients Possible values 1 65535 default setting 80 Exception Port 2222 is reserved for internal functions The server restarts automatically after the port is changed In the process the device terminates open connections to the server Table 51 Configuration frame in the Security Management Access Server dialog HTTP tab page RM GUI RSPL Release 2 0 02 2013 TT Security 2 3 Management Access Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 52 Buttons RM GUI RSPL 78 Release 2 0 02 2013 Security 2 3 Management Access 2 3 5 Server HTTPS This tab allows you to define settings for the HTTPS server of the device and to switch the server on off The HTTP server provides the graphical user interface GUI via an encrypted HTTP connection The graphical user interface communicates with the device based on SNMP via the encryp
126. d Shows whether the configuration profile is designated as Selected Possible values Selected The configuration profile is designated as Selected The device loads the configuration profile into the volatile memory RAM during the restart or when applying the function Undo Modification of Configuration When you click Save the device saves the temporarily saved settings in this configuration profile Not selected Another configuration profile is designated as Selected To designate another configuration profile as Selected you select the desired configuration profile in the table and click Select Encrypted Shows whether the configuration profile is encrypted Possible values Selected The configuration profile is encrypted Not selected The configuration profile is unencrypted You activate deactivate the encryption of the configuration profile in the Configuration Encryption frame Encryption Verified Shows whether the password of the encrypted configuration profile matches the password stored in the device Possible values Selected The passwords match The device is able to unencrypt the configuration profile Not selected The passwords are different The device is unable to unencrypt the configuration profile Software Version Shows the version number of the device software that the device ran when it saved the configuration profile Fingerprint Shows the checksum saved in the configuration
127. d authorization for the device Name Defines the community name for the authorization entered beside it Possible values 0 32 alphanumeric characters including spaces and the following special characters 1 amp lt gt 7 I _ private default setting for read and write authorization public default setting for read authorization Table 64 Table in the Securi ty Management Access SNMPv1 v2 Community dialog Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Table 65 Buttons RM GUI RSPL 86 Release 2 0 02 2013 Security 2 3 Management Access Button Meaning Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 65 Buttons cont 2 3 8 IP Access Restriction This dialog enables you to restrict the access to the management functions of the device to specific IP address ranges and selected IP based applications If the function is switched off you can access the management functions of the device from any IP address and via all applications If the function is switched on the access is restricted You can only access the management functions under the following conditions Atleast one table entry is activated and You are accessing the device with a permitted ap
128. d for internal functions The server restarts automatically after the port is changed In the process the device terminates open connections to the server Table 54 Configuration frame in the Security Management Access Server dialog HTTPS tab page Certificate Parameters Present Create Delete Meaning Shows whether the digital certificate is present in the device Possible values Selected The certificate is present Not selected The certificate has been removed Creates a digital certificate on the device To get the server to use this certificate you click Set and restart the server You can only restart the server via the Command Line Interface CLI Alternatively you can copy your own certificate to the device see the Certificate Import dialog Deletes the digital certificate To permanently remove the certificate from the device save the changes In the process the device switches off the HTTPS server Table 55 Certificate frame in the securi ty Management Access Server dialog HTTPS tab page Note In the Web browser a warning appears when you are loading the graphical user interface if you are using a certificate that has not been verified by a certifying organization To load the graphical user interface add an exception rule for the certificate in the Web browser 80 RM GUI RSPL Release 2 0 02 2013 Security 2 3 Management Access Certificate Import Parameters URL I
129. d replace it with an individually defined text To display your own text in the CLI and in the graphical user interface before the login you use the Security Pre login Banner dialog Operation Parameters Meaning Operation When this function is switched on the device shows the text information defined in the Banner Text field to all the users that login to the device via the Command Line Interface CLI When the function is switched off the CLI start screen shows information about the device The text information in the Banner Text field is kept Possible values off default setting On Table 73 Operation frame in the Security Management Access CLI dialog Login Banner tab page Banner Text Parameters Meaning Banner Text Defines the character string that the device displays in the Command Line Interface at the start of every command line Possible values 0 1024 alphanumeric characters including spaces tabs line breaks and the following special characters 1 amp lt gt N _ Y Table 74 Banner Text frame in the Security Management Access CLI dialog Login Banner tab page RM GUI RSPL Release 2 0 02 2013 93 Security 2 3 Management Access Parameters Meaning Remaining Shows how many characters are still remaining in the Banner Text field Characters for the text information Table 74 Banner Text frame in the Security Management Access CLI dialog Login Banner t
130. dard 2 term BSD licence with the following names as copyright holders Markus Friedl Theo de Raadt Niels Provos Dug Song Aaron Campbell Damien Miller Kevin Steves Daniel Kouril Wesley Griffin Per Allansson Nils Nordman Simon Wilkinson Portable OpenSSH additionally includes code from the following copyright holders also under the 2 term BSD license Ben Lindstrom Tim Rice Andre Lucas Chris Adams Corinna Vinschen Cray Inc Denis Parker Gert Doering Jakob Schlyter Jason Downs Juha Yrjola Michael Stone Networks Associates Technology Inc Solar Designer Todd C Miller Wayne Schroeder William Jones Darren Tucker Sun Microsystems The SCO Group Daniel Walsh Red Hat Inc RM GUI RSPL Release 2 0 02 2013 317 Appendix A 8 Copyright of Integrated Software Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution THIS SOFTWARE IS PROVIDED BY THE AUTHOR AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND F
131. dd to transfer the VLAN ID and the MAC address to the Static Addresses field Transfers the values specified in the VLAN ID and MAC Address fields to the Static Addresses field Shows the VLAN ID and MAC address of desired senders connected to the port The device uses this field to show the number of senders connected to the port and the upper limit You specify the upper limit for the number of entries in the table Static Limit field Removes the entries selected in the Static Addresses field Moves the entries selected in the Dynamic Addresses field to the Static Addresses field Moves every entry from the Dynamic Addresses field to the Static Addresses field If the Dynamic Addresses field contains more entries than are allowed in the Static Addresses field the device moves the foremost entries until the upper limit is reached Shows in ascending order the VLAN ID and MAC address of the senders automatically recorded on this port The device transmits data packets from these senders when it receives the data packets on this port You specify the upper limit for the number of entries in the table Dynamic Limit field The lt and lt lt buttons allow you to transfer entries from this field into the Static Addresses field In this way you connect relevant sender with the port Table 80 Wizard in the Ssecurity Port Security dialog Addresses page cont Button Back N
132. deal in the Software without restriction including without limitation the rights to use copy modify merge publish distribute distribute with modifications sublicense and or sell copies of the Software and to permit persons to whom the Software is furnished to do so subject to the following conditions The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software THE SOFTWARE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT RM GUI RSPL 320 Release 2 0 02 2013 Appendix A 8 Copyright of Integrated Software IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM DAMAGES OR OTHER LIABILITY WHETHER IN AN ACTION OF CONTRACT TORT OR OTHERWISE ARISING FROM OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE Except as contained in this notice the name s of the above copyright holders shall not be used in advertising or otherwise to promote the sale use or other dealings in this Software without prior written authorization RAL EER RELE EE CASE ER NEESER SEES RAS RAS LAER ES RASRAS LER EE SRSA SAS Se Ae ee eee RM GUI RSPL Release 2 0 02 2013 321 Appendix A 8 Copyright of Integrated Software A 8 6 OpenSSL Copyright c 1998 20
133. default setting 10 Table 141 VLAN tab in the Switching IGMP IGMP Snooping dialog RM GUI RSPL 164 Release 2 0 02 2013 Switching Parameters Fast Leave Admin Mode MRP Expiration Time 5 4 IGMP Meaning Activates deactivates the Fast Leave function for this VLAN Possible values off default setting When the Fast Leave function is switched off the device first sends MAC based queries to the members of the Multicast group and only removes an entry when a VLAN does not send any more report messages Active If the device receives an IGMP Leave message from a Multicast group when the Fast Leave function is switched on it removes the entry immediately from its address table Multicast Router Present Expiration Time Defines the time in seconds for which the device waits for a query on this port which belongs to a VLAN If the port does not receive a query data packet the device removes the port from the list of ports with connected Multicast routers You can only configure this parameter if the port belongs to an existing VLAN Possible values 2 3600 default setting 260 The value 0 means an unlimited timeout no expiration time Table 141 VLAN tab in the switching IGMP IGMP Snooping dialog cont Buttons Button Set Reload Help Table 142 Buttons RM GUI RSPL Release 2 0 02 2013 Meaning Transfers the changes to the volatile memory RAM of the device To permanently save the changes
134. der a 3 term BSD license to the following copyright holders Todd C Miller Theo de Raadt Damien Miller Eric P Allman The Regents of the University of California Constantin S Svintsoff Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF L
135. device and their properties Table The table only displays valid values if the device is equipped with SFP transceivers Parameters Meaning Port Shows the number of the device port to which the table entry relates Module Type Type of the SFP transceiver e g M SFP SX LC Serial Number Serial number of the SFP module Supported Shows whether the media module supports the SFP transceiver Temperature Operating temperature of the SFP transceiver in Celsius in Celsius Tx Power in mW Transmission power of the SFP transceiver in mW Rx Power in mW Receiving power of the SFP transceiver in mW Tx Power in dBm Transmission power of the SFP transceiver in dBm Rx Power in dBm Receiving power of the SFP transceiver in dBm Table 231 Table in the Diagnostics Ports SFP dialog RM GUI RSPL 248 Release 2 0 02 2013 Diagnostics 8 3 Ports Parameters Meaning Rx Power State Power level of the signal received The threshold values are specified by the SFP transceiver v4 Signal strength is OK amp Signal strength is lower than the SFP manufacturer recommendation The signal can still be used X No signal or signal strength too low Table 231 Table in the Diagnostics Ports sFP dialog cont Buttons Button Meaning Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 232 Buttons 8 3 4 TP cable diagnosis This feature tests the cable
136. device takes over the settings of the functions contained in this software version The device sets the settings of newer functions to the state on delivery Removes the configuration profile selected in the table from the non volatile memory NVM or from the external memory ENVM If the configuration profile is designated as Selected the device prevents you from removing the configuration profile Table 29 Buttons section x3c tblsheetnum gt of 5 46 RM GUI RSPL Release 2 0 02 2013 Basic Settings Button Select Export 1 4 Load Save Meaning Designates the configuration profile selected in the table as Selected In the Selected column the checkbox is now selected The device loads the settings of this configuration profile to the volatile memory RAM during the restart or when applying the function Undo Modification of Configuration Only designate an unencrypted device configuration as Selected when the configuration encryption in the device is switched off Only designate an encrypted device configuration as Selected when the following prerequisites are fulfilled The configuration encryption in the device is switched on The password of the configuration profile matches the password stored in the device Otherwise the device is unable to load and encrypt the settings in the configuration profile the next time it restarts For this case you specify in the Diagnostics System S
137. dpoint class 1 3 capabilities A value of networkConnectivity indicates that the device has network connectivity device capabilities Shows the extension of the VLAN Identifier for the remote system connected to this port as defined in IEEE 802 1P 1998 The device uses a value of 1 through 4094 to define a valid Port VLAN ID The device shows a value of 0 for priority tagged frames This means that only the 802 1 p priority level is significant and the device uses the default VLAN ID of the ingress port The device reserves a value of 4095 for implementation Shows the value of the 802 1 p priority which is associated with the remote system connected to the port Shows the value of the Differentiated Service Code Point DSCP which is associated with the remote system connected to the port Shows the unknown bit status of incoming traffic A value of true indicates that the network policy for the specified application type is currently unknown In this case the VLAN ID ignores the Layer 2 priority and the DSCP value fields A value of false indicates a defined network policy Shows the tagged bit status A value of true indicates that the application uses a tagged VLAN A value of false indicates that for the specific application the device uses untagged VLAN operation In this case the device ignores both the VLAN ID and the Layer 2 priority fields whereas the DSCP value is relevant Shows the vendor specific hardware revision st
138. e configuration of all the devices Failure to follow these instructions can result in death serious injury or equipment damage RM GUI RSPL 200 Release 2 0 02 2013 Redundancy 7 1 MRP Operation Parameters Meaning Operation When you have configured all the parameters for the MRP Ring you switch the function on here Possible values off default setting On When you have configured all the devices in the MRP Ring the redundancy is activated Table 179 Operation frame in the Redundancy MRP dialog Ring Port 1 Ring Port 2 Parameters Meaning Port Number of the device port that is operating as a ring port Operation Shows the operating status of the ring port Possible values forwarding Port is switched on connection exists blocked Port is blocked connection exists disabled Port is disabled not connected No connection exists Table 180 Ring Port 1 frame Ring Port 2 frame in the Redundancy MRP dialog RM GUI RSPL Release 2 0 02 2013 201 Redundancy 7 1 MRP Configuration Parameters Ring Manager Advanced Mode Ring Recovery VLAN ID Meaning Defines whether the device is operating as a ring manager Possible values off default setting Device is operating as a ring client On Device is operating as a ring manager If there is exactly one device at the ends of the line you activate this function Activate deactivate the advanced mode for fast switching times
139. e management returns to the network again Passive Passive address conflict detection The device analyzes the data traffic in the network If another device in the network is using the device s own IP address the device initially defends its IP address The device stops sending if the other device then keeps sending with the same IP address Asa defence the device sends gratuituous ARP data packets The device repeats this procedure for the number of times specified in the Number of Address Protections field If the other device continues sending with the same IP address after the period specified in the Release Delay s field the device periodically checks whether the address conflict still exists When the address conflict has been resolved the device management returns to the network again Table 16 Configuration frame in the Basic Settings Network IP Address Conflict Detection dialog RM GUI RSPL 32 Release 2 0 02 2013 Basic Settings 1 2 Network Parameters Meaning Send Periodic ARP Switches the periodic address conflict detection on off Probes Possible values On default setting The periodic address conflict detection is switched on The device periodically sends an ARP probe data packet every 90 to 150 seconds and waits for the time specified in the Detection Delay ms field for a response Ifthe device detects an address conflict it applies the passive dete
140. e Security User Management dialog radius The device authenticates the users with a RADIUS server in the network You specify the RADIUS server in the Security RADIUS Authentication Server dialog las The device authenticates the terminal devices logging in via 802 1X with the integrated authentication server IAS implemented in the device The integrated authentication server manages the login data in a separate database see the Security 802 1X Port Authentication Integrated Authentication Server dialog reject The device rejects the authentication request from the user Shows the dedicated applications When users access the device with the relevant application the device uses the defined policies for the authentication To allocate another application to the list or remove the allocation you click Allocate Applications Every application can always be allocated to exactly one list Activates deactivates the list Possible values Selected The list is activated The device uses the policies in this list when users access the device with the relevant application Not selected The list is deactivated Table 41 Table in the Security Authentication List dialog cont Note If the table does not contain a list it is only possible to access the device using CLI via the V 24 interface In this case the device authenticates the user by using the local user management see the Security User Management dialog 68 RM GUI RSPL
141. e address Possible values Valid IPv4 address default setting 0 0 0 0 In many cases there is a firewall between the device and the authentication server In the Network Address Translation NAT in the firewall the original IP address changes and the authentication server receives the translated IP address of the device The IP address in this field is transferred unchanged by the device across the Network Address Translation NAT Table 97 RADIUS Configuration frame in the Security RADIUS Global dialog RM GUI RSPL Release 2 0 02 2013 117 Security 2 6 RADIUS Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Clear Radius Deletes the statistics in the Security RADIUS Authentication Statistics Statistics dialog and in the Security RADIUS Accounting Statistics dialog Help Opens the online help Table 98 Buttons 2 6 2 Authentication Server This dialog allows you to define up to 8 authentication servers An authentication server authenticates and authorizes the users when the device forwards the login data to the server The device sends the login data to the specified primary authentication server If the server does not respond the device contacts the specif
142. e configuration in the device differs from the device configuration on the external memory Ring redundancy Defines whether the signal contact monitors the ring redundancy Possible values Ignore default setting The signal contact ignores this parameter Monitor The signal contact opens in the following situations The redundancy function becomes active loss of redundancy The device is a normal ring participant and detects an error in the local configuration Table 264 Monitoring Correct Operation frame in the Diagnostics Status Configuration Signal Contact dialog cont Manual Setting This frame allows you to control the signal contact remotely This is useful in the following situations for example Simulating an error during SPS error monitoring Remote control of a device via SNMP such as switching on a camera Parameters Meaning Contact Defines the status of the signal contact Possible values Opened default setting The signal contact is opened Closed The signal contact is closed Table 265 Manual Setting frame in the Diagnostics Status Configuration Signal Contact dialog RM GUI RSPL Release 2 0 02 2013 277 Diagnostics 8 4 Status Configuration Device Status This frame shows the status of the signal contact The signal contact indicates the device status if you have selected the Device Status option field in the Signal Contact Mode frame The signal contact indic
143. e data packet e g priority for management packets port priority Note Switch off flow control if you use the functions in this menu The flow control is switched off if Activate Flow Control is unselected in the Switching Global dialog Configuration frame The menu contains the following dialogs Global Port Configuration 802 1D p Mapping IP DSCP Mapping Queue Management RM GUI RSPL Release 2 0 02 2013 187 QoS Priority 6 1 Global 6 1 Global The device allows you to maintain access to the management functions even in situations with heavy utilization In this dialog you define the required QoS priority settings Configuration Parameters Meaning VLAN Priority for Defines the VLAN priority for management data packets to be sent The Management device sends the management data packets with the priority specified packets here IP DSCP Value for Management packets Number of Queues per Port Possible values 0 7 default setting 0 In the QoS Priority 802 1D p Mapping dialog you assign the VLAN priority to the traffic classes and thus the data packets to a priority queue of the port Defines the DSCP value for data packets that the management of the device sends Possible values 0 63 default setting 0 be cs0 Some values in the list also have a DSCP keyword e g be cs0 af11 and ef These values are compatible with the IP precedence model In the QoS Priority IP DSCP Mapping dial
144. e dialog cont Buttons Button Set Reload Help Table 166 Buttons RM GUI RSPL Release 2 0 02 2013 Meaning Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Updates the fields with the values that are saved in the volatile memory RAM of the device Opens the online help 185 Switching 5 5 VLAN RM GUI RSPL 186 Release 2 0 02 2013 QoS Priority 6 QoS Priority Communication networks transmit a number of applications at the same time that have different requirements as regards availability bandwidth and latency periods QoS Quality of Service is a procedure defined in IEEE 802 1D It is used to distribute resources in the network You therefore have the possibility of providing minimum bandwidth for important applications Prerequisite for this is that the end devices and the devices in the network support prioritized data transmission Data packets with high priority are given preference when transmitted by devices in the network You transfer data packets with lower priority when there are no data packets with a higher priority to be transmitted The device provides the following setting options You specify how the device evaluates QoS prioritization information for inbound data packets For outbound packets you specify which QoS prioritization information the device writes in th
145. e in the Basic Settings System dialog RM GUI RSPL Release 2 0 02 2013 21 Basic Settings Parameters Contact Device Type Power Supply P1 Power Supply P2 Uptime Temperature C 1 1 System Meaning Defines the contact person for this device Possible values 0 255 alphanumeric characters Shows the product name of the device Shows the status of the power supply unit on voltage supply connection P1 Possible values Present Not present Defective Shows the status of the power supply unit on voltage supply connection P2 Possible values Present Not present Defective Shows the time that has elapsed since this device was last restarted Possible values Time in the format day s hh mm ss The middle field shows the current temperature in the device in C L This field specifies the lower temperature threshold in C If the temperature in the device falls below this value the device generates an alarm T This field specifies the upper temperature threshold in C If the temperature in the device exceeds this value the device generates an alarm Possible values 99 99 integer You activate the monitoring of the temperature thresholds in the Diagnostics Status Configuration Device Status dialog The Installation user manual contains detailed information about setting the temperature thresholds Table 5 System Data frame in the Basic Settings System dialog cont 22
146. e management station Last MAC Status Shows the status of the last MAC address on this interface Possible values other added removed Table 272 Table in the Diagnostics Status Configuration MAC Notification dialog Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 273 Buttons RM GUI RSPL Release 2 0 02 2013 281 Diagnostics 8 4 Status Configuration 8 4 5 Alarms Traps The device enables you to send an SNMP message trap yourself for specific events to one or more SNMP managers You define the events for example in the Diagnostics Status Configuration Device Status dialog or the Diagnostics Status Configuration Security Status dialog With this dialog you can define the SNMP managers to which the device sends the traps Operation Parameters Meaning Operation When the function is switched on the device sends SNMP messages traps to the SNMP managers defined in the table When the function is switched off the device does not send any traps Possible values On default setting OEE Table 274 Operation frame in the Diagnostics Status Configuration Alarms Traps dialog Table Parameters Mea
147. e more unsuccessful login attempt the device locks access for the user The device only allows users with the Administrator access role to remove the lock The value 0 deactivates the lock The user can make unlimited attempts to login Table 36 Configuration frame in the Security User Management dialog RM GUI RSPL 60 Release 2 0 02 2013 Security 2 1 User Management Password policy This frame allows you to define the policy for valid passwords The device checks every new password and password change according to this policy The settings affect the Password field The prerequisite is that the Policy Check must be checkmarked Parameters Minimum Password Length Minimum Upper Cases Minimum Lower Cases Minimum Numbers Minimum Special Characters Meaning The device accepts the password if it contains at least the number of characters specified here The device checks the password according to this setting regardless of the setting for the Policy Check checkbox Possible values 6 64 default setting 6 The device accepts the password if it contains at least as many upper case letters as specified here Possible values 0 16 default setting 1 The value 0 deactivates this setting The device accepts the password if it contains at least as many lower case letters as specified here Possible values 0 16 default setting 1 The value 0 deactivates this setting The device
148. ease 2 0 02 2013 Switching Buttons Button Set Reload Create Edit Entry Help gt gt gt lt lt lt Table 137 Buttons RM GUI RSPL Release 2 0 02 2013 5 3 Filter for MAC addresses Meaning Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Updates the fields with the values that are saved in the volatile memory RAM of the device Adds a new table entry Opens the Edit Entry window Opens the online help Moves the selected entry to the right column Moves all entries to the right column Moves the selected entry to the left column Moves all entries to the left column 159 Switching 5 4 IGMP 5 4 IGMP The IGMP protocol Internet Group Management protocol is a protocol for dynamically managing Multicast groups The protocol describes the distribution of Multicast data packets between routers and terminal devices on Layer 3 The device allows you to use the IGMP Snooping function to also use the IGMP mechanisms on Layer 2 Without IGMP Snooping the device transmits the Multicast data packets to all the ports With the activated IGMP Snooping function the device transmits the Multicast data packets exclusively on ports to which Multicast receivers are connected This reduces the network load The device evaluates the IGMP data packets transmitted on Layer 3 and use
149. ection x3c tblsheetnum gt of 3 VLAN This tab page allows you to configure the IGMP Snooping protocol for every VLAN Parameters Meaning VLAN ID Shows the ID of the VLAN to which the table entry applies Possible values 4042 VLAN IDs that are set up Active Activates deactivates the IGMP Snooping protocol for this VLAN Prerequisite The IGMP Snooping protocol is activated globally in the device Soe values ff default setting IGMP Snooping is deactivated for this VLAN The VLAN has left the Multicast data stream Active IGMP Snooping is activated for this VLAN The VLAN has joined the Multicast data stream Group Membership Defines the time in seconds for which a VLAN from a dynamic Multicast Interval group remains entered in the address table when the device does not receive any more report data packets from the VLAN In the Group Membership Interval field select a value larger than the value in the Max Response Time field Possible values 3600 default setting 260 Max Response Defines the time in seconds in which the members of a Multicast group Time should respond to a query data packet For their response the members select a random time within the response time You thus help prevent the Multicast group members from responding to the query at the same time In the Max Response Time field select a value smaller than the value in the Group Membership Interval field Possible values 25
150. ection x3c tblsheetnum gt of 4 RM GUI RSPL Release 2 0 02 2013 271 Diagnostics 8 4 Status Configuration Parameters Unsecure SNMP Meaning Defines whether the device monitors the status of the SNMP server Configuration SysMon active Possible values Ignore The device ignores this parameter Monitor default setting The device changes the security status to the value Error if at least one of the following conditions applies The SNMPv1 on function is enabled The SNMPv2 on function is enabled The encryption for SNMPv3 is disabled You configure the encryption in the Security User Management dialog in the table in the SNMP encryption field You define the settings for the SNMP server in the Security Management Access Server dialog on the SNMP tab page Defines whether the device monitors the option to switch to the system External NVM monitor Possible values Ignore default setting The device ignores this parameter Monitor The device changes the security status to the value Error if the access to the system monitor is possible When the device is being started every user can switch to the system monitor via a V 24 connection You enable disable the system monitor in the Diagnostics Selftest dialog Defines whether the device monitors the saving of the device Update possible configuration on the external memory Possible values Ignore defau
151. elay s Defines the delay time for the status change in seconds Possible values 4 30 default setting 15 If the device takes over the role of the root bridge the other devices in the network use the value defined here Otherwise the device uses the value specified by the root bridge see the Root column In the RSTP protocol the bridges negotiate a status change without a specified delay The STP protocol uses the parameter to delay the status change between the statuses disabled discarding learning forwarding The parameters Forward Delay and Max Age have the following relationship Forward Delay 2 Max Age 2 1 If you enter a value in the field that contradict this relationship the device replaces these values with the last valid values or with the default value Table 186 Protocol Configuration Information frame Bridge column in the Redundancy Spanning Tree Global dialog section x3c tblsheetnum gt of 3 RM GUI RSPL 206 Release 2 0 02 2013 Redundancy 7 2 Spanning Tree Parameters Meaning Specifies the maximum permissible branch length i e the number of Max Age Tx Hold Count devices to the root bridge Possible values 6 40 default setting 20 If the device takes over the role of the root bridge the other devices in the network use the value defined here Otherwise the device uses the value specified by the root bridge see the Root column The STP proto
152. elftest dialog whether the device starts with the factory settings or terminates the restart and stops Note Only configuration profiles in the non volatile memory NVM can be designated as Selected If the checkbox in the Auto save config on ENVM field is selected in the Basic Settings External Memory dialog the device also designates the configuration profile with the same name on the external memory as Selected Opens a menu with the following buttons Exports the configuration profile selected in the table and saves it as an XML file on the PC or on a server The device gives you the following options for exporting a configuration profile Download to PC To save the file on your PC or on a network drive click and select the directory there Download to a TFTP server To save the file on a TFTP server enter the URL for the file in the following form tftp lt IP address gt lt path gt lt file name gt Download to an SCP or SFTP server To save the file on an SCP or SFTP server enter the URL for the file in one of the following forms scp orsftp lt IP address gt lt path gt lt file name gt When you click OK the device displays the Authentication window There you enter the User and Password to login to the server scp orsftp lt user gt lt password gt lt IP address gt lt path gt lt file name gt Table 29 Buttons section x3c tblsheetnum gt of 5
153. emory is becoming scarce software The device detects software errors e g error in the consistency check hardware The device detects hardware errors e g in the chip set Action Defines how the device behaves if the adjacent error occurs Possible values reboot default setting The device triggers a cold reset logOnly The device logs the error in the log file system log sendTrap The device sends an SNMP message trap The prerequisite for sending SNMP messages traps is that the function is switched on in the Diagnostics Status Configuration Alarms Traps dialog and atleast 1 SNMP manager is defined Table 198 Table in the Diagnostics System Selftest dialog RM GUI RSPL 224 Release 2 0 02 2013 Diagnostics 8 1 System Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 199 Buttons RM GUI RSPL Release 2 0 02 2013 225 Diagnostics 8 2 Report 8 2 Report The device allows you to log user actions and device specific events In this menu you configure the logging settings for the device You also have the option to view the reports The menu contains the following dialogs Global Syslog Persistent Logging Hardware State Sy
154. enders you thus make MAC Flooding attacks more difficult Note With the automatic recording of the Dynamic Addresses the device always discards the 1st data packet from unknown senders Using this 1st data packet the device checks whether the upper limit has been reached The device records the sender until the upper limit is reached Afterwards the device transmits data packets that it receives on the relevant port from this sender RM GUI RSPL Release 2 0 02 2013 95 Security 2 4 Port Security Operation Parameters Meaning Operation When this function is switched on the device checks the VLAN ID and MAC address of the sender before it transmits a data packet Possible values On The device only transmits a received data packet if its sender is desired on the relevant device port Also activate the checking of the sender on the relevant device ports off default setting The device transmits every received data packet without checking the sender Table 76 Operation frame in the Security Port Security dialog Table Parameters Meaning Port Shows the number of the device port to which the table entry relates Active Activates deactivates the checking of the sender on the device port Possible values Selected The device checks every data packet received on the device port and transmits it if its sender is desired You also switch on the function in the Operation frame Not selected default setting The dev
155. ential packets before transmitting The receiving device reassembles the packet in the correct order The device counts the packets which are less than 64 bytes as fragments When configured and activated the device monitors both conditions If either the CRC or the Fragment count exceeds the configured condition the device performs the user defined action Table Parameters Meaning Port Shows the number of the device port to which the table entry relates Sampling Interval s Defines the interval in seconds for CRC Fragment detection for this entry Possible values 5 180 default setting 10 CRC Fragments Defines the CRC Fragment detection counter for this entry When the count ppm frequency of CRC Fragments reaches this number the device produces the action configured in the Global tab Prerequisite for this function is that the CRC Fragments on function in the Global tab is active Possible values 1 1000000 default setting 1000 Last active Interval Shows the number of CRC Fragments that occurred during the last ppm interval Total ppm Shows the total number of CRC Fragments that occurred since the last reset Table 242 Table in the CRC Fragments tab of the Diagnostics Ports Port Monitor dialog RM GUI RSPL 256 Release 2 0 02 2013 Diagnostics 8 3 Ports Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you o
156. ential number to which the table entry relates The device automatically defines this number Possible values he Defines the name of the configured email server Possible values 0 255 alphanumeric characters Defines the IP address or hostname of the email server Possible values Valid IP address default setting 0 0 0 0 Hostname in the format host name or subdomain host name Defines the SMTP port number Possible values 1 65535 default setting 25 Exception Port 2222 is reserved for internal functions A value of 0 returns the feature to the default setting Defines the authentication mechanism Possible values none default setting tisvl Use this value when authenticating with a User ID and Password Defines the user id to use to authenticate the switch Prerequisite for this function is that you configure the Security function as tlsvl Possible values 0 255 alphanumeric characters Defines the password to use to authenticate the device Prerequisite for this function is that you configure the Security function as tlsvl Possible values 0 255 alphanumeric characters Activates deactivates the email message handling for this row Possible values Selected The device sends an email message according to the user defined configuration Not selected default setting Table 212 Table in the Diagnostics Report Email Logging Global dialog RM GUI RSPL Release 2 0 02 2013 235 D
157. entry when the Aging Time has been exceeded if the device does not receive any data from this device during this time Table 13 Table in the Basic Settings Network ARP Table dialog cont To reset the counters click Reset ARP table in the Basic Settings Restart dialog Buttons Button Meaning Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 14 Buttons RM GUI RSPL 30 Release 2 0 02 2013 Basic Settings 1 2 Network 1 2 3 IP Address Conflict Detection The device allows you to detect whether another device in the network is using its own IP address Whenever the device detects an address conflict the status LED of the device flashes red 4 times In this dialog you specify the procedure with which the device detects address conflicts and define the required settings for this In the table the device logs instances of another device in the network using its own IP address Operation Parameters Meaning Operation When this function is switched on the device detects whether another device in the network is using its own IP address Possible values On default setting The address conflict detection is switched on Of E The address conflict detection is switched off Table 15 Operation frame in the Basic Settings Network IP Address Conflict Detection dialog RM GUI RSPL Release 2 0 02 2013 31 Basic Settings 1 2
158. eparately independent VLAN learning Ports Shows how the corresponding device port transmits data packets for the adjacent destination address Possible values The port does not transmit any data packets to the destination address learned The port transmits data packets to the destination address The device sets up the filter automatically based on received data packets IGMP learned The port transmits data packets to the destination address The device sets up the filter automatically based on IGMP unicast static The port transmits data packets to the destination address A user created the filter multicast static The port transmits data packets to the destination address A user created the filter Table 134 Table in the switching Filters for MAC Addresses dialog cont To remove the learned MAC addresses from the address table forwarding database click Reset MAC Address Table in the Basic Settings Restart dialog Create To set up a filter manually click the Create button Parameters Meaning VLAN ID Defines the ID of the VLAN to which the table entry applies Possible values All VLAN IDs that are set up Table 135 Create window RM GUI RSPL Release 2 0 02 2013 157 Switching 5 3 Filter for MAC addresses Parameters Meaning Address Defines the destination MAC address to which the table entry applies Possible values Valid MAC address Enter the value in one of the following formats
159. er for this entry When the frequency of link flaps reaches this number the device produces the action configured in the Global tab Prerequisite for this function is that the Link Flap on checkbox in the Global tab is selected Possible values 1 100 default setting 5 Last Sampling Shows the link flap count that occurred during the last interval Interval Total Shows the total link flap count since the last reset Table 240 Table in the Link Flap tab of the Diagnostics Ports Port Monitor dialog Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Reset Resets the port monitor function for the selected interface and enables the port when disabled by the Port Monitor function Help Opens the online help Table 241 Buttons RM GUI RSPL Release 2 0 02 2013 255 Diagnostics 8 3 Ports 8 3 8 Port Monitor CRC Fragments In this dialog you configure the device to monitor the Cyclical Redundancy Check CRC and Fragmentation The CRC is a code added to the data to detect accidental changes in the raw data Fragmentation occurs when the Maximum Transmission Unit MTU of a port is smaller than the packet size The sending device divides the packet into several smaller sequ
160. es off default setting IGMP Snooping is deactivated for this port The port has left the Multicast data stream Active IGMP Snooping is activated for this port The port is included in the Multicast data stream Table 140 Interface tab in the Switching IGMP IGMP Snooping dialog section x3c tblsheetnum gt of 3 162 RM GUI RSPL Release 2 0 02 2013 Switching Parameters Group Membership Interval Max Response Time MRP Expiration Time Fast Leave Admin Mode Static Query Port 5 4 IGMP Meaning Defines the time in seconds for which a port from a dynamic Multicast group remains entered in the address table when the device does not receive any more report data packets from the port In the Group Membership Interval field select a value larger than the value in the Max Response Time field Possible values 2 3600 default setting 260 Defines the time in seconds in which the members of a Multicast group should respond to a query data packet For their response the members select a random time within the response time You thus help prevent the Multicast group members from responding to the query at the same time In the Max Response Time field select a value smaller than the value in the Group Membership Interval field Possible values 1 25 default setting 10 Specifies the MRP Multicast Router Present expiration time The MRP expiration time is the time in seconds for whi
161. es On Activates the DHCP L2 Relay function on the device off default setting Deactivates the DHCP L2 Relay function on the device Table 285 Operation frame in the Advanced DHCP L2 Relay Configuration dialog Interface Parameters Meaning Port Shows the number of the device port to which the table entry relates Active Activates deactivates the DHCP L2 Relay function on the port Prerequisite is that you activate the function globally Possible values Selected Activates the DHCP L2 Relay function on the port Not selected default setting Deactivates the DHCP L2 Relay function on the port Trusted Port Activates deactivates the DHCP Layer 2 Relay trust mode for the given interface Possible values Selected The device accepts DHCP packets with Option 82 information Not selected default setting The device drops DHCP packets received on untrusted ports containing Option 82 information Table 286 Interface tab in the Advanced DHCP L2 Relay Configuration dialog RM GUI RSPL Release 2 0 02 2013 295 Advanced VLAN Parameters VLAN ID Active Circuit ID Remote ID Type Remote ID 9 1 DHCP L2 Relay Meaning VLAN to which the table entry relates Activates deactivates the DHCP L2 Relay function on the VLAN Prerequisite is that you first activate the function globally Possible values Selected Not selected default setting Activates deactivates the addition of the circuit identifier to the Option
162. es the HTTP access Possible values selected default setting Access is activated for the adjacent IP address range not selected Access is deactivated HTTPS Activates deactivates the HTTPS access Possible values Selected default setting Access is activated for the adjacent IP address range Not selected Access is deactivated Table 67 Table in the Security Management Access IP Access Restriction dialog RM GUI RSPL 88 Release 2 0 02 2013 Security Parameters SNMP 2 3 Management Access Meaning Activates deactivates the SNMP access Possible values Selected default setting Access is activated for the adjacent IP address range Not selected Access is deactivated Telnet Activates deactivates the Telnet access Possible values selected default setting Access is activated for the adjacent IP address range not selected Access is deactivated SSH Activates deactivates the SSH access Possible values Selected default setting Access is activated for the adjacent IP address range Not selected Access is deactivated Active Activates deactivates the table entry Possible values Selected default setting Table entry is activated The device restricts access to its management functions to the adjacent IP address range and the selected IP based applications Not selected Table entry is deactivated Table 67 Table in the Security Management Access IP Access Restriction dialog cont I
163. ess to the network if the terminal device logs in successfully If the terminal device does not send any EAPoL data packets the device grants or denies access to the network individually depending on the MAC address of the terminal device See the MAC Authorized Bypass Enabled field You use this setting if multiple terminal devices are connected to the port Defines the time period in seconds in which the authenticator does not accept any more logins from the terminal device after an unsuccessful login attempt Possible values 0 65535 default setting 60 Defines the period in seconds after which the authenticator requests the terminal device to login again After this waiting period the device sends an EAP request identity data packet to the terminal device Possible values 1 65535 default setting 30 Defines the period in seconds for which the authenticator waits for the login of the terminal device Possible values 1 65535 default setting 30 Defines the period in seconds for which the authenticator waits for the response from the authentication server RADIUS or IAS Possible values 1 65535 default setting 30 Table 86 Table in the Security 802 1X Port Authentication Port Configuration dialog section x3c tblsheetnum gt of 5 106 RM GUI RSPL Release 2 0 02 2013 Security Parameters Max Request Constant Assigned VLAN ID Assignment Reason Reauthentication Period s Reauthenticat
164. etting This setting allows the data traffic to run at a normal priority with voice traffic present on the interface untrust With voice traffic present and the Voice VLAN Mode set to dotip priority data traffic uses priority 0 When the interface forwards data traffic exclusively the data traffic uses the normal priority Shows the status of the Voice VLAN on the port Possible values enabled disabled Defines the ID of the VLAN to which the table entry applies To forward traffic to this VLAN ID using this filter set the Voice VLAN Mode to vlan Possible values 1 4042 VLAN IDs that are set up Table 165 Table in the switching VLAN Voice dialog 184 RM GUI RSPL Release 2 0 02 2013 Switching Parameters Priority Bypass authentification 5 5 VLAN Meaning Defines the port Voice VLAN Priority if the Voice Vlan Mode is dot 1p Possible values OS none Deactivates the Voice VLAN Priority of the port Sets the port Voice VLAN Authentication mode Voice devices require authentication when you disable this feature and set the Voice VLAN Mode to dot1p Possible values enable If you enabled the global dot1x functionality on the device then before enabling this feature set the Port Control mode to macBased for this port The Port Control feature is in the Security 802 1x Port Authentication Port Configuration dialog disable default setting Table 165 Table in the switching VLAN Voic
165. ext Finish Table 81 Buttons RM GUI RSPL Release 2 0 02 2013 Meaning Displays the previous page again Changes are lost Saves the changes and opens the next page Saves the changes and completes the configuration 99 Security 2 4 Port Security Button Meaning Cancel Closes the Wizard Changes are lost Table 81 Buttons cont After closing the Wizard click Set to save your settings Note The device stores the senders connected with the port until you deactivate the checking of the sender on the relevant port or in the Operation frame RM GUI RSPL 100 Release 2 0 02 2013 Security 2 5 802 1X Port Authentication 2 5 802 1X Port Authentication With the port based access control according to IEEE 802 1X the device monitors the access to the network from connected terminal devices The device authenticator only allows a terminal device supplicant to access the network when it logs in with valid login data The authenticator and the terminal devices communicate via the EAPoL Extensible Authentication Protocol over LANs authentication protocol The device supports the following methods to authenticate terminal devices radius A RADIUS server in the network authenticates the terminal devices 1as The Integrated Authentication Server IAS implemented in the device authenticates the terminal devices Compared to RADIUS the IAS only provides basic functions The menu contains the following dialogs 802 1
166. figuration frame in the Time SNTP Client dialog State Parameters Status Meaning Shows the status of the SNTP client Possible values disabled The SNTP client is disabled notSynchronized The SNTP client is not synchronized with any SNTP or NTP server syncToRemoteSserver The SNTP client is synchronized with an SNTP or NTP server Table 118 State frame in the Time SNTP Client dialog RM GUI RSPL Release 2 0 02 2013 135 Time Table 3 2 SNTP In the table you define the settings for up to 4 SNTP servers Parameters Index Description Address Target UDP Port Meaning Shows a sequential number to which the table entry relates Possible values Teel The device automatically defines this number When you delete a table entry this leaves a gap in the numbering When you create a new table entry the device fills the first gap After starting the device sends requests to the SNTP server configured in the first table entry If the server does not reply the device sends its requests to the SNTP server configured in the next table entry If none of the configured SNTP servers responds in the meantime the SNTP client loses its synchronization The device cyclically sends requests to each SNTP server until a server delivers a valid time The device synchronizes itself with this SNTP server even if the other servers can be reached again later Specifies the name of the SNTP server Possible values
167. file GUI Java Runtime Environment L LLDP Load save device configuration Login banner Login banner CLI Login prompt CLI Login window Log file HTML Log audit trail Loops M MAC address table MAC flooding 87 195 231 11 327 Index MAC spoofing Management access Management VLAN Media Redundancy Protocol Memory external MRP Network load ports Non volatile memory NVM NVM O Operating instructions GUI P Persistent event logging Port clients 802 1X Port configuration Port configuration 802 1X Port configuration QoS Priority Port mirroring Port priority Port security Port statistics EAPoL Port VLAN Port VLAN ID Port based access control 802 1X Pre login banner Priority queue Q Queue management QoS R RADIUS RAM RAM test Rate limiter Redundancy Request interval SNTP Resetting log files Resetting counters Restart Restarting device Restricting management access RFC Ring structure RMON probe Root bridge RSTP RSTP S Save configuration GUI 328 13 240 109 104 190 261 190 111 181 182 101 125 188 197 Save system information as zip archive 231 Saving event log permanently 240 Secure shell 82 Security status 269 Selftest 223 Setting the system time 128 Severity for events 232 236 SFP module 248 SFP module temperature 248 SFP state display 248 Signal contact 274 Signature SSH 84 SNMPv1 v2 Communi
168. fines whether the device monitors the password for the locally set up not changed user accounts user and admin Possible values Ignore The device ignores this parameter Monitor default setting The device changes the security status to the value Error if the password for the user or admin user account is unchanged from the default setting You set the password in the Security User Management dialog Configured min Defines whether the device monitors the password rule Minimum password length lt 8 Password Length Possible values Ignore The device ignores this parameter Monitor default setting The device changes the security status to the value Error if the value for the password rule is less than 8 You configure the password rules in the Security User Management dialog in the Password Policy frame Table 259 Monitoring frame in the Diagnostics Status Configuration Security Status dialog section x3c tblsheetnum gt of 4 RM GUI RSPL 270 Release 2 0 02 2013 Diagnostics 8 4 Status Configuration Parameters Meaning Password strength Defines whether the device monitors the password rules not configured Possible values Ignore The device ignores this parameter Monitor default setting The device changes the security status to the value Error if the value for at least one of the following password rules is 0 Minimum Upper Cases Minimum Lower Cases Minimum Nu
169. g Parameters Port VLAN ID Acceptable Frame Types Ingress Filtering 5 5 VLAN Meaning The port assigns to this VLAN data packets that have no VLAN tag This setting is effective if you have selected the value admitAll in the Acceptable Frame Types column Possible values All VLAN IDs that are set up default setting 1 Defines whether the port transmits or discards received data packets without a VLAN tag Possible values admitAl11 default setting The port accepts data packets both with and without a VLAN tag admitOnlyVlanTagged The port only accepts data packets tagged with a VLAN ID 2 1 Defines whether the port transmits or discards received data packets with a VLAN tagging Possible values selected The device compares the VLAN tagging in the data packet with the VLANs to which the device sends on this port according to the Switching VLAN Static dialog If the VLAN tagging in the data packet matches one of these VLANs the port forwards the data packet to ports in this VLAN Otherwise the port discards the data packet not selected default setting The port forwards data packets received with a VLAN tagging to other ports without comparing the VLAN IDs Thus the port also transmits data packets with a VLAN tagging even though it is not a member of this VLAN Table 162 switching VLAN Port dialog cont Note If the MRP Ring configuration is assigned to a VLAN the device automatically perfo
170. g The device ignores this parameter Monitor The device changes the device status to Error in the following situations The device configuration only exists in the device The device configuration in the device differs from the device configuration on the external memory Table 253 Monitoring frame in the Diagnostics Status Configuration Device Status dialog cont Propagate Connection Error table Parameters Meaning Port Shows the number of the device port to which the table entry relates Table 254 Propagate Connection Error table in the Diagnostics Status Configuration Device Status dialog RM GUI RSPL 266 Release 2 0 02 2013 Diagnostics 8 4 Status Configuration Parameters Meaning Propagate Defines whether the device monitors the link status of the port Connection Error Possible values Selected The device changes the device status to Error if the link at this port is interrupted Not selected default setting The device status remains unchanged if the link at this port is interrupted This setting is only effective if you have selected the value Monitor in the Connection error field of the Monitoring frame Table 254 Propagate Connection Error table in the Diagnostics Status Configuration Device Status dialog cont Propagate State table Parameters Meaning Power Supply Number of the power supply that applies to this entry Propagate State Defines whether the
171. g in the Switching IGMP Snooping Enhancements wizard cont Button Meaning Back Displays the previous page again Changes are lost Next Saves the changes and opens the next page Finish Saves the changes and completes the configuration Cancel Closes the Wizard Changes are lost Table 148 Buttons After closing the Wizard click Set to save your settings RM GUI RSPL Release 2 0 02 2013 169 Switching 5 4 IGMP 5 4 3 IGMP Querier The device allows you to send a Multicast stream only to those ports to which a Multicast receiver is connected To determine which ports Multicast receivers are connected to the device sends query data packets to the ports at a definable interval If a Multicast receiver is connected it joins the Multicast stream by responding to the device with a report data packet This dialog allows you to configure the Snooping Querier settings globally and for the VLANs that are set up Operation Parameters Meaning Operation Activates deactivates the IGMP Querier function globally in the device Possible values On off default setting Table 149 Operation frame in the Switching IGMP Querier dialog Configuration In this frame you define the IGMP Snooping Querier settings for the general query data packets Parameters Meaning Protocol Version Defines the IGMP version of the general query data packets Possible values 1 IGMP v1 2 IGMP v2 default setting 3 IGMP v3 Query Inte
172. g settings The source from which the device management receives its IP parameters VLAN in which the management can be accessed Parameters Meaning IP Address Defines the source from which the device receives its IP parameters after Assignment starting Possible values BOOTP The device receives its IP parameters from a BOOTP or DHCP server The server evaluates the MAC address of the device then assigns the IP parameters DHCP default setting The device receives its IP parameters from a DHCP server The server evaluates the MAC address the DHCP name or other parameters of the device then assigns the IP parameters Local The device uses the IP parameters from the internal memory You define the settings for this in the IP Parameter frame Note If there is no response from the BOOTP or DHCP server the device sets the IP address to 0 0 0 0 and makes another attempt to obtain a valid IP address VLAN ID Defines the ID of the VLAN in which the device management can be accessed via the network Possible values 1 4042 default setting 1 You can only access the management via the network via device ports that are members of this VLAN You can see which VLAN a device port is assigned to in the switching VLAN Current dialog MAC Address Displays the MAC address of the device The device management can be accessed via the network using the MAC address Table 8 Management Interface frame in the Basic Settings Netw
173. g user actions among others A user logging on via CLI local or remote A user logging off manually Automatic logging off of a user in CLI after a specified period of inactivity Device restart Locking of a user account due to too many failed logon attempts Locking of the management access due to failed logon attempts Commands executed in CLI apart from show commands Changes to configuration variables Changes to the system time File transfer operations including firmware updates Configuration changes via HiDiscovery Firmware updates and automatic configuration of the device via the external memory Opening and closing of SNMP via an HTTPS tunnel Buttons Button Meaning Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Search Opens the Search dialog The dialog allows you to search the log file for search terms or regular expressions Save Opens the Save dialog The dialog allows you to save the log file in HTML format on your PC Help Opens the online help Table 227 Buttons RM GUI RSPL Release 2 0 02 2013 245 Diagnostics 8 3 Ports 8 3 Ports This menu shows information on the port statistics on the utilization on the individual ports and on the connected SFP transceivers The menu contains the following dialogs Statistics Table Utilization SFP TP cable diagnosis Port Monitor Auto Disable Port Mirroring 8 3 1 Statistics Table This dialog shows you in table f
174. ged on when inactive Table 59 Configuration frame in the Security Management Access Server dialog SSH tab page Fingerprint The fingerprint is an easily verified hexadecimal number sequence that uniquely identifies the RSA or DSA key host key of the SSH server Parameters Meaning DSA Number sequence of the public DSA key of the server RSA Number sequence of the public RSA key of the server Table 60 Server dialog SSH tab Fingerprint frame After importing a new RSA or DSA key the device continues to display the existing fingerprint until you restart the server RM GUI RSPL Release 2 0 02 2013 83 Security Signature Parameters DSA Present RSA Present Create Delete 2 3 Management Access Meaning Shows whether a DSA key host key is present in the device Possible values selected A key is present not selected No key is present Shows whether an RSA key host key is present in the device Possible values selected A key is present not selected No key is present Creates a key host key on the device The device only creates the key when the server is deactivated Length of the key created 2048 bit RSA 1024 bit DSA To get the server to use the key created you click Set Then you switch the server on Alternatively you can copy your own key to the device in PEM format see the Import frame Removes the key host key from the device To permanently remove
175. gnated port role If a device port has no connection or if it has not received any STP BDPUs yet the device displays the values that the device port would send with the designated role Table 190 CIST tab page in the Redundancy Spanning Tree Port dialog section x3c tblsheetnum gt of 4 RM GUI RSPL 212 Release 2 0 02 2013 Redundancy 7 2 Spanning Tree Parameters Meaning Received Port ID Shows the port ID of the device from which this device port last received an STP BPDU Possible values For device ports with the designated role the device displays the information for the STP BPDU last received by the port This helps to diagnose the possible STP problems in the network For the alternate backup master and root port roles in the stationary condition static topology this information is identical to the information of the designated port role If a device port has no connection or if it has not received any STP BDPUs yet the device displays the values that the device port would send with the designated role Received Path Cost Shows the path cost that the higher level bridge has from its root port to the root bridge Possible values For device ports with the designated role the device displays the information for the STP BPDU last received by the port This helps to diagnose the possible STP problems in the network For the alternate backup master and root port roles in the stationary condition static
176. gs Help Opens the online help Table 29 Buttons section x3c tblsheetnum gt of 5 RM GUI RSPL Release 2 0 02 2013 49 Basic Settings 1 5 External Memory 1 5 External Memory This dialog allows you to activate functions that the device automatically executes in combination with the external memory ENVM The dialog also shows the operating state and identifying characteristics of the external memory Table Parameters Meaning Type Shows the type of the external memory Possible values SD External SD memory ACA31 Status Shows the operating status of the external memory Possible values notPresent No external memory connected removed Someone has removed the external memory from the device during operation ok The external memory is connected and ready for operation outoOfMemory The memory space is occupied on the external memory genericErr The device has detected an error Writable Shows whether the device has write access to the external memory Possible values Selected The device has write access to the external memory Not selected The device only has read access to the external memory It is possible that write protection is activated on the external memory Manufacturer ID Shows the name of the memory manufacturer Product Name Shows the product name specified by the memory manufacturer Version Shows the version number specified by the memory manufacturer Serial Number Shows the serial nu
177. he Loop State field to true Ifthe device port then receives STP BPDUs again the device sets the state of the port to a value according to the port role and the value in the Loop State field to false If you switch on the Loop Guard function while the Root Guard function is switched on the device switches off the Root Guard function Shows whether the loop state of the device port is inconsistent Possible values true The loop state of the device port is inconsistent The device port is not receiving any STP BPDUs and the Root Guard function is switched on The device sets the state of the device port to the value discarding The device thus prevents any potential loops false The loop state of the device port is consistent The device port receives STP BPDUs Shows how often the device has set the value in the Loop State field from false to true Shows how often the device has set the value in the Loop State field from true to false Table 191 Guards tab page in the Redundancy Spanning Tree Port dialog section x3c tblsheetnum gt of 3 216 RM GUI RSPL Release 2 0 02 2013 Redundancy Parameters 7 2 Spanning Tree Meaning BPDU Guard Effect Prerequisite The device port is a manually defined edge port terminal device port In the Port dialog the checkbox in the Admin Edge Port column is Selected for this port In the Redundancy Spanning Tree Global dialog the B
178. he device loads the configuration profile designated as Selected off default setting Function is switched off Switch the function off again before you close the graphical user interface You thus prevent the device from restoring the configuration profile designated as Selected Note Before you switch on the function save the settings in the configuration profile Therefore current changes that are only saved temporarily in the device are kept Specifies the time in seconds after which the device loads the selected configuration profile from the non volatile memory NVM if the connection is lost Possible values 30 600 default setting 600 Specify a sufficiently large value Take into account the time when you are only viewing the dialogs of the graphical user interface without changing or updating them Shows the IP address of the PC on which you have activated the function Possible values IPv4 address default setting 0 0 0 0 Table 27 Undo Modification of Configuration frame in the Basic Settings Load Save dialog 42 RM GUI RSPL Release 2 0 02 2013 Basic Settings 1 4 Load Save Table Parameters Meaning Storage Type Shows the storage location of the configuration profile Possible values RAM volatile memory of the device In the volatile memory the device stores the settings for the current operation NVM non volatile memory of the device From the non volatile memory the device loads
179. he device port is physically switched off Defines how the device port behaves when no cable is connected Possible values no power save default setting The device port remains activated auto power down The device port switches to the energy saving mode unsupported The device port does not support this function and remains activated Activates deactivates the automatic configuration of the device port Possible values Selected default setting This setting has priority over the manual configuration of the device port The device port negotiates the operating mode independently using autonegotiation and detects the devices connected to the TP port automatically Auto Cable Crossing After the function is switched on it takes a few seconds for the device port to set the operating mode Not selected The device port works with the values you defined in the Manual Configuration column and the Manual Cable Crossing Auto Conf off column Table 32 Table in the Basic Settings Port Configuration dialog section x3c tblsheetnum gt of 4 54 RM GUI RSPL Release 2 0 02 2013 Basic Settings 1 6 Port Configuration Parameters Meaning Manual Defines the operating mode of the device port when the automatic Configuration configuration of the device port is deactivated Possible values 10 Mbit s HDX Half duplex connection 10 Mbit s FDX Full duplex connection 100 Mbit s HDX Half duplex connection 100 Mbit s FD
180. he relevant license agreements and can be used freely for any purpose the GNU license being the most restrictive see below for details However none of that term is relevant at this point in time All of these restrictively licenced software components which he talks about have been removed from OpenSSH i e RSA is no longer included found in the OpenSSL library IDEA is no longer included its use is deprecated DES is now external in the OpenSSL library GMP is no longer used and instead we call BN code from OpenSSL Zlib is now external in a library The make ssh known hosts script is no longer included TSS has been removed MD5 is now external in the OpenSSL library RC4 support has been replaced with ARC4 support from OpenSSL Blowfish is now external in the OpenSSL library RM GUI RSPL 312 Release 2 0 02 2013 Appendix A 8 Copyright of Integrated Software The licence continues Note that any information and cryptographic algorithms used in this software are publicly available on the Internet and at any major bookstore scientific library and patent office worldwide More information can be found e g at http www cs hut fi crypto The legal status of this program is some combination of all these permissions and restrictions Use only at your own responsibility You will be responsible for any legal consequences yourself am not making any claims whether possessing or
181. iagnostics Buttons Button Set Reload Create Remove Send Test Help Table 213 Buttons 8 2 Report Meaning Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Updates the fields with the values that are saved in the volatile memory RAM of the device Adds a new table entry Removes the selected table entry Sends an email to the configured address containing the log messages Sends a test email to the configured address Opens the online help Meaning of the severities for events Severity emergency alert critical error warning notice P informational debug Meaning Device not ready for operation Immediate user intervention required Critical status Error status Warning Significant normal status Informal message Debug message Table 214 Meaning of the severities for events 236 RM GUI RSPL Release 2 0 02 2013 Diagnostics 8 2 Report 8 2 3 Email Logging Addresses Use this table to define the destination email addresses for the respective message type Table Parameters Index Message Type Address Active Meaning Shows a sequential number to which the table entry relates The device automatically defines this number Possible values 1 10 Defines the log message type to send to the destination email address Possible
182. ible VLAN data sets in LLDP frames with a maximum length The device compares the first 39 VLANs automatically If you have 40 or more VLANs configured on a device check the congruence of the further VLANs manually if necessary Buttons Button Meaning Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 196 Buttons RM GUI RSPL 222 Release 2 0 02 2013 Diagnostics 8 1 System 8 1 3 Selftest This dialog allows you to do the following Activate deactivate the RAM test when the device is being started Enable disable the switch to the system monitor when the device is being started Defines how the device behaves in the case of an error Configuration Parameters Meaning RAM Test Defines whether the device tests the RAM memory during the restart Possible values Selected default setting The device tests the RAM memory during the restart Not selected The device skips the memory test during the restart This shortens the start time for the device Activate SysMon1___ Activates deactivates the access to the system monitor during the restart Possible values Selected default setting The device allows you to switch to the system monitor during the restart Not selected The device starts without the option to switch to the system monitor Among other things the system monitor allows you to update the device software or delete saved device
183. ic Settings Restart dialog Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 222 Buttons RM GUI RSPL 242 Release 2 0 02 2013 Diagnostics 8 2 Report 8 2 6 Hardware State This dialog provides information about the distribution and state of the flash memory of the device Information Parameters Meaning Operating Time Shows the total operating time of the device since it was delivered Possible values day s hh mm ss Table 223 Information frame in the Diagnostics Report Hardware State dialog Table Parameters Meaning Flash Region Shows the name of the respective memory area Description Shows a description of what the memory uses the memory area for Flash Sectors Shows how many sectors are assigned to the memory area Number of Sector Shows how often the device has overwritten the sectors of the memory Erase Operations area Table 224 Table in the Diagnostics Report Hardware State dialog Buttons Button Meaning Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 225 Buttons RM GUI RSPL Release 2 0 02 2013 243 Diagnostics 8 2 7 System
184. ic Settings 1 1 System 1 1 System With this dialog you can display device properties and monitor individual operating statuses Device Status The fields in this frame show the device status and inform you about alarms that have occurred You define the parameters that the device monitors in the Diagnostics Status Configuration Device Status dialog Parameters Meaning Symbol Shows the device status Possible values The device status is OK The monitored parameters have the desired status An alarm has occurred At least one monitored parameter differs x from the desired status Alarm Start Time Shows the time at which the device triggered the alarm with the current highest priority Possible values Date and time in the format Month Day Year hh mm ss AM PM The device triggers an alarm if a monitored parameter differs from the desired status In the Diagnostics Status Configuration Device Status dialog the parameters are sorted by priority High priority at the top low priority at the bottom Alarm Reason Shows the cause of the alarm and the current highest priority Table 3 Device Status frame in the Basic Settings System dialog Note The device reports an alarm if you only connect one power supply unit for the supply voltage to a device with multiple ports To avoid this alarm you deactivate the monitoring of the missing power supply units in the Diagnostics Status Configuration Device Status dialog
185. ice allows you send data packets with a VLAN tagging according to the QoS priority information contained in the data packet with a higher or lower priority In this dialog you assign the VLAN priority to the traffic classes The traffic classes are assigned to the priority queues of the device ports Table To change the settings click the desired row of the Traffic Class column and modify the value Parameters Meaning VLAN Priority VLAN priority of received data packets Traffic Class Defines the traffic class Possible values One T The traffic classes are assigned to the priority queues of the device ports Traffic class 7 queue with the highest priority Traffic class 0 queue with the lowest priority Table 171 Table in the Q0S Priority 802 1D p Mapping dialog VLAN Priority Traffic class Content description according to IEEE 802 1D 0 2 Best Effort Normal data without prioritizing 1 0 Background Non time critical data and background services 2 1 Standard Normal data 3 3 Excellent Effort Important data 4 4 Controlled load Time critical data with a high priority 5 5 Video Video transmission with delays and jitter lt 100 ms Table 172 Default assignment of the VLAN priority to the traffic classes RM GUI RSPL Release 2 0 02 2013 193 QoS Priority 6 3 802 1D p Mapping VLAN Priority Traffic class Content description according to IEEE 802 1D 6 6 Voice Voice transmission with delays and jitter lt 10 ms
186. ice transmits every data packet received on the port without checking the sender Note If you are operating the device as an active subscriber within an MRP ring we recommend setting the value of the field to Not selected Table 77 Table in the Security Port Security dialog RM GUI RSPL 96 Release 2 0 02 2013 Security Parameters Violation Traps Violation Trap Frequency s Dynamic Limit Static Limit Current Dynamic Current Static Last Violating VLAN ID MAC Trapped Violations 2 4 Port Security Meaning Activates deactivates the sending of an SNMP message trap when the device discards data packets from an undesired sender on the port Possible values Selected The device sends an SNMP message when it discards data packets from an undesired sender on the port Not selected default setting The device does not send any SNMP messages The prerequisite for sending SNMP messages traps is that the function is switched on in the Diagnostics Status Configuration Alarms Traps dialog and at least 1 SNMP manager is defined Defines the waiting time in seconds that the device waits after sending an SNMP message trap before sending the next SNMP message Possible values 0 3600 default setting 0 The value 0 deactivates the waiting time Specifies the upper limit for the number of automatically recorded senders Dynamic Addresses When the upper limit has been reached the device stops the lea
187. ied secondary authentication server that is highest in the table If no response comes from this server either the device contacts the next server in the table Table Parameters Meaning Index Shows a sequential number to which the table entry relates The device automatically defines this number Possible values 1 8 Table 99 Table in the Security RADIUS Authentication Server dialog RM GUI RSPL 118 Release 2 0 02 2013 Security Parameters Name Address UDP Port Secret Primary Server Active 2 6 RADIUS Meaning Shows the name of the server To change the value click the relevant field Possible values 1 32 alphanumeric characters Default setting Default RADIUS Server Specifies the IP address of the server Possible values Valid IPv4 address Specifies the number of the UDP port on which the server receives requests Possible values 0 65535 default setting 1812 Exception Port 2222 is reserved for internal functions Shows asteriks when a password is specified with which the device logs in to the server To change the password click the relevant field Possible values 1 16 alphanumeric characters You get the password from the administrator of the authentication server Specifies the authentication server as primary or secondary Possible values Selected The server is specified as the primary authentication server The device sends the login data for authen
188. ield reaches the value entered here Parameters Meaning Week Defines the week in the current month Possible values none state on delivery first second third forth last Day Defines the day of the week Possible values none state on delivery sun mon tue wed thu FET sat Month Defines the month Possible values none state on delivery jan feb mar apr mai jun jul aug sep oct nov dec Table 113 Summertime Begin frame in the Time Basic Settings dialog Daylight Saving Time tab page RM GUI RSPL Release 2 0 02 2013 131 Time 3 1 Basic Settings Parameters Meaning Systemtime Defines the time Possible values 00 00 state on delivery lt HH MM gt Table 113 Summertime Begin frame in the Time Basic Settings dialog Daylight Saving Time tab page cont Summertime End In the first 3 fields you define the day for the end of summertime and in the last field the time The devices switches to normal time when the time in the System Time field reaches the value entered here Parameters Meaning Week Defines the week in the current month Possible values none state on delivery first second third forth last Day Defines the day of the week Possible values none state on delivery sun mon tue wed thu fri sat Table 114 Summertime End frame in the Time Basic Settings dialog Daylight Saving Time tab page RM GUI RSP
189. igure it The menu contains the following dialogs MRP Spanning Tree RM GUI RSPL Release 2 0 02 2013 199 Redundancy 7 1 MRP 7 1 MRP The MRP Media Redundancy Protocol is a protocol that enables you to set up high availability ring shaped network structures An MRP Ring is made up of up to 50 devices that support the MRP protocol according to IEC 62439 The ring structure of an MRP Ring changes back into a line structure if a section fails The maximum switching time can be configured The Ring Manager function of the device enables the ends of a backbone in a line structure to be closed to a redundant ring Note For all devices in an MRP Ring activate the MRP compatibility in the Redundancy Spanning Tree Global dialog if you want to use RSTP in the MRP Ring If this is not possible perhaps because individual devices do not support the MRP compatibility you deactivate the Spanning Tree protocol on the ports connected to the MRP Ring Spanning Tree and Ring Redundancy affect each other Note If you combine RSTP with an MRP Ring you must give the devices in the MRP Ring a better i e numerically lower RSTP bridge priority than the devices in the connected RSTP network You thus help avoid a connection interruption for devices outside the Ring A WARNING RING LOOP HAZARD To avoid loops during the configuration phase configure all the devices individually Before you connect the redundant line be sure to complete th
190. ims to bring down specific services or devices Denial of Service DoS The menu contains the following dialogs DoS RM GUI RSPL Release 2 0 02 2013 143 Network Security 4 1 DoS 4 1 DoS The device supports you in protecting against invalid or fake data traffic that aims to bring down specific services or devices Denial of Service DoS With this menu you can use various filters to restrict the data traffic for Denial of Service attacks The menu contains the following dialog Global 4 1 1 Global With this dialog you can configure the DoS settings for the TCP UDP IP and ICMP protocols TCP UDP The attaching stations uses port scans to prepare network attacks Here the station attempts to use the network to detect the devices present and the services they provide This frame allows you to activate or deactivate the detection of port scans The device detects the following scan types Null scan Xmas scan SYN FIN scan RM GUI RSPL 144 Release 2 0 02 2013 Network Security 4 1 DoS TCP offset protection TCP SYN protection L4 port protection Minimal header scan Parameter Meaning Activate Null Scan Activates or deactivates the null scan Filter Possible values Selected The device detects ingress data packets with no TCP flags set and TCP sequence number reset to 0 and discards these Not selected default setting The null scan is deactivated Activate Xmas Filter Activates or deactivates the Xman scan
191. in Banner dialog Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 109 Buttons RM GUI RSPL 126 Release 2 0 02 2013 Time 3 Time The device allows you to synchronize the system time in the device and in the network with SNTP Simple Network Time Protocol The device is equipped with a buffered hardware clock This clock maintains the correct time if the power supply fails or you disconnect the device from the power supply After the device is started the current time is available to you e g for log entries The hardware clock bridges a power supply downtime of 3 hours The prerequisite is that the power supply of the device has been connected continually for at least 5 minutes beforehand The menu contains the following dialogs Basic Settings SNTP RM GUI RSPL Release 2 0 02 2013 127 Time 3 1 Basic Settings 3 1 Basic Settings With this dialog you can define time related settings independently of the time synchronization protocol selected The dialog contains the following tabs Global Daylight Saving Time 3 1 1 Global On this tab you define the time zone to which the system time in the device refers Configuratio
192. ine Interface CLI Users logging in with SSH see the text regardless of the client used before or during the login To display the text only in the Command Line Interface CLI you use the settings in the Security Management Access CLI dialog Operation Parameters Meaning Operation When this function is switched on the device shows a greeting or information text in the login dialog of the graphical user interface GUI and of the Command Line Interface CLI Possible values off default setting The device does not show a text in the login dialog If you entered a text in the Banner Text field this text is kept On The device shows the text specified login dialog in the Banner Text field in the Table 107 Operation frame in the Security Pre login Banner dialog RM GUI RSPL Release 2 0 02 2013 125 Security 2 7 Pre login Banner Banner Text Parameters Meaning Banner Text Specifies the greeting or information text that the device displays in the login dialog of the graphical user interface GUI and of the Command Line Interface CLI Possible values Maximum 512 alphanumeric characters including spaces tabs line breaks and the following special characters 1 b amp lt gt 7 M _ Remaining Shows how many characters are still available in the Banner Text field Characters Possible values 512 0 Table 108 Banner Text frame in the Security Pre log
193. ine the settings for edge ports and view the current values The abbreviation CIST stands for Common and Internal Spanning Tree Note If you are using other layer 2 redundancy protocols parallel to Spanning Tree on the device Switch off the Spanning Tree function on the device ports that are participating in other redundancy protocols Otherwise the redundancy may operate differently to the way intended This can cause loops Parameters Meaning Port Shows the number of the device port to which the table entry relates Stp active Switches the Spanning Tree function on off on the device port Possible values Selected default setting Not selected If the Spanning Tree is activated in the device and switched off on the device port the port does not send STP BPDUs and drops any STP BPDUs received Port State Shows the transmission state of the device port Possible values discarding The device port is blocked and only forwards STP BPDUs learning The device port is blocked but it learns the MAC addresses of received data packets forwarding The device port forwards data packets disabled The device port is switched off See the Basic Settings Port Configuration dialog manualFwd The Spanning Tree function is switched off on the device port The device port forwards STP BPDUs notParticipate The device port is not participating in STP Table 190 CIST tab page in the Redundancy Spanning Tree Port dialog section x3c t
194. information recorded during the authentication Table Parameters Meaning Port Shows the number of the device port to which the table entry relates Authentification Shows the time at which the authenticator authenticated the terminal Time Stamp device Result Age Shows since when this entry has been entered in the table MAC Address Shows the MAC address of the terminal device VLAN ID Shows the ID of the VLAN that was assigned to the terminal device before the login Authentication Shows the status of the authentication on the device port Status Possible values success The authentication was successful failure The authentication failed Table 92 Table in the Security 802 1X Port Authentication Port Authentication History dialog RM GUI RSPL 112 Release 2 0 02 2013 Security Parameters Access Status Assigned VLAN ID Assignment Type Assignment Reason 2 5 802 1X Port Authentication Meaning Shows whether the device grants the terminal device access to the network Possible values granted The device grants the terminal device access to the network denied The device denies the terminal device access to the network Shows the ID of the VLAN that the authenticator assigned to the port Shows the type of the VLAN that the authenticator assigned to the port Possible values default radius unauthenticatedVLAN guestVlan monitorVlan notAssigned Shows the reason for the assignment of the VLAN ID and the
195. ing Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save RM GUI RSPL Release 2 0 02 2013 Switching 5 5 VLAN Button Meaning Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Create Adds a new table entry Remove Removes the selected table entry Help Opens the online help Table 161 Buttons cont 5 5 4 Port In this dialog you specify how the device handles received data packets that have no VLAN tag or whose VLAN tag differs from the VLAN ID of the port This dialog allows you to assign a VLAN to the device ports and thus define the port VLAN ID Additionally you also define for each device port how the device transmits data packets when the VLAN Unaware mode is switched off if one of the following situations occurs The port receives data packets without a VLAN tagging The port receives data packets with VLAN priority information VLAN ID 0 priority tagged The VLAN tagging of the data packet differs from the VLAN ID of the port Note The VLAN settings are only effective if the VLAN Unaware Mode is switched off see the Switching Global dialog Table Parameters Meaning Port Shows the number of the device port to which the table entry relates Table 162 switching VLAN Port dialog RM GUI RSPL Release 2 0 02 2013 181 Switchin
196. ing dialog displays the traffic class to which the respective IP DSCP value is assigned The device assigns the data packets to a traffic class depending on their IP DSCP value and thereby sorts them in the priority queue The device assigns the changed VLAN priority to the data packet in accordance with its DSCP value Data packets that are not IP data packets are prioritized by the device according to the value defined in the Port Priority column Shows the traffic class If you have defined the value unt rusted in the Trust Mode column the device assigns the data packets to this traffic class Possible values Oise In the QoS Priority 802 1D p Mapping dialog you assign the VLAN priority to the traffic classes and thus the data packets to a priority queue of the port Table 169 Table in the 0oS Priority Port Configuration dialog cont Buttons Button Set Meaning Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Table 170 Buttons RM GUI RSPL Release 2 0 02 2013 191 QoS Priority 6 2 Port Configuration Button Meaning Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 170 Buttons cont RM GUI RSPL 192 Release 2 0 02 2013 QoS Priority 6 3 802 1D p Mapping 6 3 802 1D p Mapping The dev
197. ing the port authentication according to IEEE 802 1X The prerequisite for this is that the Activate accounting mode function must be activated in the Security RADIUS Global Menu The device sends the traffic data to the first accounting server that can be reached If it does not respond the device contacts the next server in the table Table Parameters Meaning Index Shows a sequential number to which the table entry relates The device automatically defines this number Possible values Tass Table 101 Table in the Security RADIUS Accounting Server dialog RM GUI RSPL 120 Release 2 0 02 2013 Security 2 6 RADIUS Parameters Meaning Name Shows the name of the server To change the value click the relevant field Possible values 1 32 alphanumeric characters Default setting Default RADIUS Server Address Specifies the IP address of the server Possible values Valid IPv4 address UDP Port Specifies the number of the UDP port from which the server receives requests Possible values 0 65535 default setting 1813 Exception Port 2222 is reserved for internal functions Secret Shows asteriks when a password is specified with which the device logs in to the server To change the password click the relevant field Possible values 1 16 alphanumeric characters You get the password from the administrator of the authentication server Active Activates deactivates the connection to the server
198. ion Enabled 2 5 802 1X Port Authentication Meaning Defines how often the authenticator requests the terminal device to login until the time specified in the Supplicant Timeout Period s has elapsed The device sends an EAP request identity data packet to the terminal device as often as specified here Possible values 0 10 default setting 2 Shows the ID of the VLAN that the authenticator assigned to the port This value only applies if the value auto is specified for the port in the Port Control column Possible values 0 4042 default setting 0 You will find the VLAN ID that the authenticator assigned to the device ports in the Security 802 1X Port Authentication Port Clients dialog If the value macBased is specified for the port in the Port Control column The device assigns the VLAN tag based on the MAC address of the terminal device when it receives data packets without a VLAN tag Shows the reason for the assignment of the VLAN ID This value only applies if the value auto is specified for the port in the Port Control column Possible values notAssigned default setting radius guestVlan unauthenticatedVLAN You will find the VLAN ID that the authenticator assigned to the device ports in the Security 802 1X Port Authentication Port Clients dialog Defines the period in seconds after which the authenticator periodically requests the terminal device to login again Possible values 1 65535 default
199. iscards data packets with an unknown MAC IP Multicast address Table 153 Configuration frame in the switching IGMP Multicasts dialog Table In the table you define the settings for known Multicasts for the VLANs that are set up Parameters Meaning VLAN ID Shows the ID of the VLAN to which the table entry applies Table 154 Table in the switching IGMP Multicasts dialog RM GUI RSPL Release 2 0 02 2013 173 Switching 5 4 IGMP Parameters Meaning Known Multicasts Defines how the device transmits the data packets with known Multicast addresses Possible values Send to query and registered ports The device sends data packets with an unknown MAC IP Multicast address to query ports and to registered ports Send to registered Ports default setting The device sends data packets with an unknown MAC IP Multicast address to registered ports Table 154 Table in the switching IGMP Multicasts dialog cont Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 155 Buttons RM GUI RSPL 174 Release 2 0 02 2013 Switching 5 5 VLAN 5 5 VLAN With VLAN Virtual Local Area Network you distribute the data traffic in the physical network to l
200. le you click on Set in a dialog while the device is operating Shows whether the selected configuration profile in the external memory ENVM and the selected configuration profile in the non volatile memory NVM are the same Possible values Selected The configuration profiles are the same Not selected The configuration profiles are different Possible causes No external memory is connected to the device Inthe Basic Settings External Memory dialog the Auto save config on ENVM function is activated Table 26 Information frame in the Basic Settings Load Save dialog RM GUI RSPL Release 2 0 02 2013 41 Basic Settings 1 4 Load Save Undo Modifications of Configuration Parameters Operation Period to undo while Connection is lost s Watchdog IP Address Meaning When a user switches on the function the device continuously checks whether it can still be reached from the IP address of the user If the connection is lost after a defined time period the device loads the Selected configuration profile from the non volatile memory NvM Afterwards the device can be accessed again Possible values On Function is switched on You define the time period between the loss of the connection and the loading of the configuration profile in the field Period to undo while Connection is lost s Ifthe non volatile memory NVM contains multiple configuration profiles t
201. le values Selected The device detects and discards ingress TCP or UDP data packets for which source port number is identical to the destination port number Not selected default setting The L4 port scan is deactivated Activates or deactivates the minimal header scan Possible values Selected The device detects and discards ingress data packets for which the data offset value multiplied by 4 is smaller than the minimum TCP header size Not selected default setting The minimal header scan is deactivated Table 125 TCP UDP frame in the Network Security DoS Globa1 dialog cont IP This frame allows you to activate or deactivate the land attack filter With the land attack method the attacking station sends data packets whose source and destination addresses are identical to those of the receiver When you activate this filter the device detects data packets with identical source and destination addresses and discards these Parameter Activate Land Attack Filter Meaning Activates or deactivates the land attack scan Possible values Selected The device detects and discards ingress IP data packets having source IP address identical to destination IP address Not selected default setting The land attack scan is deactivated Table 126 IP frame in the Network Security DoS Global dialog 146 RM GUI RSPL Release 2 0 02 2013 Network Security 4 1 DoS ICMP This dialog provides you with filter options for the
202. lly by the following mechanisms Redundancy mechanisms The device learns the MAC addresses for every VLAN separately independent VLAN learning RM GUI RSPL Release 2 0 02 2013 175 Switching 5 5 VLAN The menu contains the following dialogs Global Current Static Port Voice 5 5 1 Global This dialog allows you to view general VLAN parameters for the device Configuration Parameters Meaning Max VLAN ID Biggest ID that you can assign to a VLAN See the Switching VLAN Static dialog Max Number of Maximum number of VLANs that you can set up in the device VLANs See the switching VLAN Static dialog Number of VLANs Number of VLANs currently set up in the device See the Switching VLAN Static dialog The VLAN with ID 1 is always set up in the device Table 156 Configuration frame in the Switching VLAN Global dialog Buttons Button Meaning Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Table 157 Buttons RM GUI RSPL 176 Release 2 0 02 2013 Switching 5 5 VLAN Button Meaning Clear Resets the VLAN settings of the device to the state on delivery Caution You block your access to the device if you have changed the VLAN ID for the management functions of the device in the Basic Settings Network dialog Help Opens the online help Table 157 Buttons cont 5 5 2 Current This dialog allows you to view the static and dynamic VLANs tha
203. lt setting The device ignores this parameter Monitor The device changes the safety status to the value Error if the device also saves the device configuration on the external memory You enable disable the saving of the device configuration on the external memory in the Basic Settings External Memory dialog Table 259 Monitoring frame in the Diagnostics Status Configuration Security Status dialog section x3c tblsheetnum gt of 4 272 RM GUI RSPL Release 2 0 02 2013 Diagnostics Parameters Active Port without link HiDiscovery Enabled 8 4 Status Configuration Meaning Defines whether the device monitors the link status of the enabled device ports Possible values Ignore default setting The device ignores this parameter Monitor The device changes the security status to the value Error if the link on an enabled device port is interrupted You have the option of selecting the device ports to be monitored individually Defines whether the device monitors the status of HiDiscovery Possible values Ignore The device ignores this parameter Monitor default setting The device changes the Security Status to the value Error if Operation for the HiDiscovery Protocol is On and Access is readWrite You enable disable the HiDiscovery Protocol in the Basic Settings Network dialog in the HiDiscovery Protocol frame Table 259 Monitoring frame in the Diagnostics Status Config
204. ly Sete Table 146 Select VLAN Port dialog in the Switching IGMP Snooping Enhancements Wizard Wizard Configuration This page of the Wizard allows you to configure the selected port Parameters VLAN ID Port Static Learn by LLDP Meaning Shows the ID of the VLAN to which the table entry applies Possible values 1 4042 VLAN IDs that are set up Shows the number of the device port to which the table entry relates Possible values Des ty cle Dp Tegete Defines the port as a static query port The device only transmits IGMP report messages to the ports at which it receives IGMP queries Allows you to also transmit IGMP report messages to other selected ports enable or connected Hirschmann devices Automatic Possible values off default setting Active Defines the port as Learned by LLDP Allows directly connected Hirschmann devices to be detected via LLDP and learned as query ports n Possible values off default setting Active n Table 147 Configuration dialog in the Switching IGMP Snooping Enhancements wizard 168 RM GUI RSPL Release 2 0 02 2013 Switching 5 4 IGMP Parameters Meaning Forward All Defines the port as Forward A11 With the Forward A11 setting the device transmits at this port all data packets with a Multicast address in the destination address field Possible values off default setting Active Table 147 Configuration dialo
205. ly save the changes afterwards you open the Basic Settings Load Save dialog and click Save Updates the fields with the values that are saved in the volatile memory RAM of the device Opens the online help Table 280 Buttons RM GUI RSPL Release 2 0 02 2013 287 Diagnostics 8 5 LLDP 8 5 2 Topology Discovery Devices in a network send advertisements in packets called LLDP Data Units LLDPDUs The data sent and received via LLDPDUs is useful for many reasons For example the device discovers which devices on a network are neighbors and through which ports they connect to each other This dialog with its tabs allows you to map the network as well as discover the devices connected with their capabilities LLDP This tab shows you the collected LLDP information for the neighboring devices This information enables the network management station to map the structure of your network When devices both with and without an active topology discovery function are connected to a device port the topology table hides the devices without active topology discovery When only devices without active topology discovery are connected to a device port the table will contain one line for this port to represent all devices This line contains the number of connected devices The Forwarding Database FDB address table contains MAC addresses of devices that the topology table hides for the sake of clarity If you use 1 port to connect
206. mber specified by the memory manufacturer Table 30 Table in the Basic Settings External Memory dialog section x3c tblsheetnum gt of 2 RM GUI RSPL 50 Release 2 0 02 2013 Basic Settings Parameters Enable Automatic Software Update Config Priority Auto save config on envm 1 5 External Memory Meaning Defines whether the device updates the device software when it restarts Possible values selected default setting During a restart the device updates the device software when the following files are located in the external memory the image file of the device software atextfile startup txt with the content autoUpdate FILE NAME OF THE IMAGE FILE Not selected The device performs the restart without updating the device software Specifies which memory the device loads the configuration profile from when it restarts Possible values disable The device loads the configuration profile from the non volatile memory NVM first second third The device loads the configuration profile from the external memory ENVM If the device does not find a configuration profile on the external memory it loads the configuration profile from the non volatile memory NVM Note When loading the configuration profile from the external memory ENVM the device overwrites the settings of the Selected configuration profile in the non volatile memory NVM If the Config Priority
207. mbers Minimum Special Characters You configure the password rules in the Security User Management dialog in the Password Policy frame Defines whether the device monitors the status of the function Policy Password strength check inactive Telnet Enabled Check Possible values Ignore default setting The device ignores this parameter Monitor The device changes the security status to the value Error if the function Policy Check is deactivated for at least 1 user account You configure the Policy Check function in the table in the Security User Management dialog Defines whether the device monitors the status of the Telnet server HTTP Enabled Possible values Ignore The device ignores this parameter Monitor default setting The device changes the security status to the value Error if the Telnet server is enabled You enable disable the Telnet server in the security Management Access Server dialog on the Telnet tab page Defines whether the device monitors the status of the HTTP server Possible values Ignore The device ignores this parameter Monitor default setting The device changes the security status to the value Error if the HTTP server is enabled You enable disable the HTTP server in the Security Management Access Server dialog on the HTTP tab page Table 259 Monitoring frame in the Diagnostics Status Configuration Security Status dialog s
208. meters Severity Meaning Defines the minimum severity for the events The device buffers log entries for events with this severity and with more urgent severities in the storage area with a higher priority Possible values emergency alert eritie al error warning default setting notice informational debug Table 201 Buffered Logging frame in the Diagnostics Report Global dialog SNMP logging Parameters Log SNMP Get Request Log SNMP Set Request Meaning When the function is switched on the device logs an event for the syslog for SNMP Get Requests You define the severity for this event in the Severity Get Request field Possible values On Off default setting When the function is switched on the device logs an event for the syslog for SNMP Set Requests You define the severity for this event in the Severity Set Request field Possible values On off default setting Table 202 SNMP Logging frame in the Diagnostics Report Global dialog 228 RM GUI RSPL Release 2 0 02 2013 Diagnostics Parameters Severity Get Request Severity Set Request 8 2 Report Meaning Defines the severity of the event that the device logs for SNMP Get Requests Possible values emergency alert critical error warning notice default setting informational debug Defines the severity of the event that the device logs for SNMP Set Requests Possible values emergency alert
209. minimum bandwidths for Weighted Fair Queuing to traffic classes Table Parameters Meaning Traffic Class Shows the traffic class assigned to a priority queue of the ports Strict Priority Defines whether the device processes the priority queues of the ports with Strict Priority or with Weighted Fair Queuing Possible values Selected default setting Strict Priority You use this setting for time and latency critical applications such as VoIP or video The device port only sends data packets that are in the priority queue with the highest priority If this priority queue is empty the device port sends data packets that are in the priority queue with the next lower priority The device port only sends data packets with a lower traffic class when the priority queues with a higher priority are empty In unfavorable situations the device port never sends these data packets Inthis setting the device switches the function on automatically even for all traffic classes with a higher priority Not selected Weighted Fair Queuing Weighted Round Robin WRR The user assigns a minimum bandwidth to each traffic class The device port transmits data packets with a low traffic class even if there is high utilization Inthis setting the device switches the function off automatically even for all traffic classes with a lower priority Table 177 Table in the 0oS Priority Queue Management dialog RM GU
210. mport Meaning Defines the path and file name of the certificate X 509 certificates PEM are permitted The device gives you the following options for copying the certificate to the device File upload If the certificate is on your PC or on a network drive click select the file that contains the signature key TFTP upload If the certificate is on a TFTP server enter the URL for the file in the following form tftp lt IP address gt lt path gt lt file name gt SCP or SFTP upload If the certificate is on an SCP or SFTP server you enter the URL for the file in the following form scp orsftp lt IP address gt lt path gt lt file name gt When you click Import the device displays the Authentication window There you enter the User and Password to login to the server scp orsftp lt user gt lt password gt lt IP address gt lt path gt lt file name gt Shows the Open dialog Here you select the certificate file to be copied if the file is located on your PC or on a network drive Copies the certificate defined in the File field to the device and To get the server to use this certificate you click Set and restart the server You can only restart the server via the Command Line Interface CLI Table 56 Certificate Import frame in the security Management Access Server dialog HTTPS tab page Buttons Button Set Reload Help Meaning
211. n Parameters Meaning System Time UTC Displays the current date and time with reference to Universal Time Coordinated UTC System Time Displays the current date and time with reference to the local time System Time System Time UTC Local Offset min Daylight Saving Time Set Time from PC The device uses the time on the PC as the system time Table 110 Configuration frame in the Global tab of the Time Basic Settings dialog RM GUI RSPL 128 Release 2 0 02 2013 Time 3 1 Basic Settings Parameters Meaning Time Source Shows the time source from which the device gets the time information The device automatically selects the available time source with the greatest accuracy Possible values local System clock of the device sntp The SNTP client is activated and the device is synchronized by an SNTP server Local Offset min Defines the difference between the local time and the System Time UTC in minutes Local Offset min System Time System Time UTC Possible values 780 840 default value 60 Set Offset from PC The device determines the time zone on your PC and uses it to calculate the difference between the local time and the System Time UTC Table 110 Configuration frame in the Global tab of the Time Basic Settings dialog cont Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards
212. n a VLAN set up statically in the device to the port Defines the period in seconds for which the authenticator waits for EAPOL data packets after the terminal device is connected If this period elapses the authenticator grants the terminal device access to the network and assigns the port to the guest VLAN specified in the Guest VLAN ID field Possible values 1 300 default setting 90 Specifies the ID of the VLAN that the authenticator assigns to the port if the terminal device does not login successfully This value only applies if the value auto is specified for the port in the Port Control column This function allows you to grant terminal devices without valid login data access to selected services in the network Possible values 0 4042 default setting 0 The effect of the value 0 is that the authenticator does not assign an unauthenticated VLAN to the port Note Only assign a VLAN set up statically in the device to the port Table 86 Table in the Security 802 1X Port Authentication Port Configuration dialog section x3c tblsheetnum gt of 5 108 RM GUI RSPL Release 2 0 02 2013 Security 2 5 802 1X Port Authentication Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory
213. n seconds for the reinitialization of a device port Possible values 1 10 default setting 2 If the value for a device port in the Operation field is of f the device tries to initialize the port again after the time defined here has elapsed Transmit Delay s Defines the delay in seconds for transmitting successive LLDP data packets Possible values 1 8192 default setting 2 The recommended value is between a minimum of 1 and a maximum of a quarter of the value in the Transmit Interval s field Notification Interval Defines the interval in seconds for transmitting LLDP notifications s Possible values 5 3600 default setting 5 After transmitting a notification trap the device waits for the time interval to expire before transmitting the next notification trap Table 278 Configuration frame in the Diagnostics LLDP Configuration dialog Table Parameters Meaning Port Shows the number of the device port to which the table entry relates Table 279 Table in the Diagnostics LLDP Configuration dialog RM GUI RSPL Release 2 0 02 2013 285 Diagnostics 8 5 LLDP Parameters Meaning Admin Status Defines whether the device port transmits and receives LLDP data packets Possible values Transmit The device port transmits LLDP data packets but stores no information about neighboring devices Receive The device port receives LLDP data packets but transmits no information to neighboring devices Receive and
214. n the Diagnostics Report Global dialog Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Table 204 Buttons RM GUI RSPL 230 Release 2 0 02 2013 Diagnostics Button Download Support Information Download JAR File Help Meaning 8 2 Report Opens the Save dialog This dialog allows you to save a ZIP archive on your PC that contains system information about the device The device generates the file name of the ZIP archive automatically based on the format lt IP address gt lt device name gt zip You will find an explanation of the files contained in the ZIP archive in the following section Opens the Save dialog The dialog allows you to save the Java Applet of the graphical user interface GUI on your PC as a JAR file When you start the JAVA Applet you have the option of administering the device even if its HTTP server is switched off for security reasons The device generates the file name of the Java Applet automatically based Flware version gt on the format lt product gt lt soi lt build no gt Jar Opens the online help Table 204 Buttons cont Support Information Files contained in ZIP archive System information Audit t
215. n the state on delivery there is a default entry in the table for the IP address range 0 0 0 0 0 in which the access for all applications is activated This table entry allows you access to the device regardless of your location e g to initially configure the function You have the option to change or delete this table entry When you create a new table entry it has the same properties Note To start the graphical user interface in a Web browser you require the HTTP or HTTPS service For the graphical user interface to have access to the device the SNMP service is also required If you are using the graphical user interface outside the Web browser you only require the SNMP service RM GUI RSPL Release 2 0 02 2013 89 Security Buttons Button Set Reload Create Remove Help Table 68 Buttons 2 3 9 Web 2 3 Management Access Meaning Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Updates the fields with the values that are saved in the volatile memory RAM of the device Adds a new table entry Removes the selected table entry Opens the online help With this dialog you can define settings for the graphical user interface Web based interface Configuration Parameters Web Interface Session Timeout min Meaning Defines the timeout in minutes After the device has
216. nformation about the device software Version Parameters Meaning Stored Version Shows the version number and creation date of the device software stored in the flash memory The device loads the device software during the next restart Export Exports the Stored Version of the device software and saves it as an image file on your PC Running Version Shows the version number and creation date of the device software that the device loaded during the last restart and is currently running Bootcode Shows the version number and creation date of the boot code Table 20 Version frame in the Basic Settings Software dialog RM GUI RSPL Release 2 0 02 2013 35 Basic Settings 1 3 Software Software Update Parameters File Update Meaning Defines the path and the file name of the image file with which you update the device software The device gives you the following options for updating the device software File upload If the file is located on your PC or on a network drive click select the file there TFTP upload If the file is located on a TFTP server enter the URL for the file in the following form tftp lt IP address gt lt path gt lt file name gt SCP or SFTP upload If the file is located on an SCP or SFTP server enter the URL for the file in one of the following forms scp orsftp lt IP address gt lt path gt lt file name gt When you click Update the device displays the Authentic
217. ng After the connection is set up after 1 5 x Hello Time the device sets the device port to the forwarding state default setting 1 5 x 2 s if the port has not received any STP BPDUs during this time Not selected After the connection is set up after Max Age the device sets the device port to the forwarding state default setting 20 s Shows whether a terminal device or an STP bridge is connected to the device port Possible values enable A terminal device is connected to the device port The device port does not receive any STP BPDUs disable An STP bridge is connected to the device port The device port receives STP BPDUs Shows whether the port is connected to an STP device via a direct full duplex link Possible values true The device port is connected directly to an STP device via a full duplex link The direct decentralized communication between 2 bridges enables short reconfiguration times false The device port is connected in another way e g via a half duplex link or via a hub Table 190 CIST tab page in the Redundancy Spanning Tree Port dialog section x3c tblsheetnum gt of 4 214 RM GUI RSPL Release 2 0 02 2013 Redundancy 7 2 Spanning Tree Guards On this tab page you can define the settings for various protection functions on the device ports Parameters Meaning Port Shows the number of the device port to which the table entry relates Root Guard Switches the monitoring of ST
218. ng SMI v2 IGMPv2 The TLS Protocol Version 1 0 AES Ciphersuites for Transport Layer Security Administratively Scoped IP Multicast Definition of the Differentiated Services Field DS Field in the IPv4 and IPv6 Headers An Architecture for Differentiated Service SMlv2 Textual Conventions for SMI v2 Conformance statements for SMI v2 SMON RADIUS Authentication Client MIB Release 2 0 02 2013 301 Appendix RFC 2620 RFC 2674 RFC 2818 RFC 2851 RFC 2863 RFC 2865 RFC 2866 RFC 2868 RFC 2869 RFC 2869bis RFC 2933 RFC 3164 RFC 3376 RFC 3410 RFC 3411 RFC 3412 RFC 3413 RFC 3414 RFC 3415 RFC 3418 RFC 3580 RFC 3584 RFC 4022 RFC 4113 RFC 4188 RFC 4251 RFC 4252 RFC 4253 RFC 4254 RFC 4293 RFC 4318 RFC 4330 RFC 4363 RFC 4541 RFC 4836 302 A 2 List of RFCs RADIUS Accounting MIB Dot1p Q HTTP over TLS Internet Addresses MIB The Interfaces Group MIB RADIUS Client RADIUS Accounting RADIUS Attributes for Tunnel Protocol Support RADIUS Extensions RADIUS support for EAP IGMP MIB The BSD Syslog Protocol IGMPv3 Introduction and Applicability Statements for Internet Standard Management Framework An Architecture for Describing Simple Network Management Protocol SNMP Management Frameworks Message Processing and Dispatching for the Simple Network Management Protocol SNMP Simple Network Management Protocol SNMP Applications User based Security Model USM for version 3 of the Simple Net
219. ning Name Defines a name for the SNMP manager Possible values 1 32 alphanumeric characters including the following special characters I R lt gt ON Address Defines the IP address and the port number of the SNMP manager Possible values lt Valid IPv4 address gt lt port number gt Table 275 Table in the Diagnostics Status Configuration Alarms Traps dialog RM GUI RSPL 282 Release 2 0 02 2013 Diagnostics 8 4 Status Configuration Parameters Meaning Active Defines whether the device sends SNMP messages traps to this SNMP manager Possible values Selected default setting The device sends traps to this SNMP manager Not selected The device does not send traps to this SNMP manager Table 275 Table in the Diagnostics Status Configuration Alarms Traps dialog Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Create Opens the Create dialog to add a new entry to the table In the Create dialog you define the name and the IP address and port number of the SNMP manager If you choose not to enter a port number the device automatically adds the port number 162 Remove Removes the selected table entry Help Opens the online help Table 27
220. nline help Wizard Select Port The Wizard helps you to connect the device ports with one or more desired senders Parameters Select Port Meaning Defines the device port that you assign to the sender in the next step Table 79 Wizard in the Security Port Security dialog Select Port page Wizard Addresses The Wizard helps you to connect the device ports with one or more desired senders When you have defined the settings click Finish To save the changes afterwards click Set in the Security Port Security dialog Parameters VLAN Meaning Specifies the VLAN ID of the desired sender Possible values 1 4042 Click Add to transfer the VLAN ID and the MAC address to the Static Addresses field Table 80 Wizard in the Security Port Security dialog Addresses page 98 RM GUI RSPL Release 2 0 02 2013 Security Parameters MAC Address Add Static Addresses Remove lt lt lt Dynamic Addresses 2 4 Port Security Meaning Specifies the MAC address of the desired sender Possible values Valid Unicast MAC address Enter the value in one of the following formats without a separator e g 001122334455 separated by spaces e g 00 11 22 33 44 55 separated by colons e g 00 11 22 33 44 55 separated by hyphens e g 00 11 22 33 44 55 separated by points e g 00 11 22 33 44 55 separated by points after every 4th character e g 0011 2233 4455 Click A
221. nsmits the data packets for the corresponding VLANs and how it handles the VLAN tagging Possible values state on delivery The port does not transmit any data packets for the VLAN The port is not a member of the VLAN T The port transmits data packets with a VLAN tag tagged You use this setting for an uplink connection for example U state on delivery for VLAN 1 The port transmits data packets without a VLAN tag untagged Use this setting if the connected terminal device does not evaluate any VLAN tags F The port does not transmit any data packets neither from static nor dynamic VLANs forbidden Use this setting if the connected terminal device does not evaluate any VLAN tags Table 160 Table in the switching VLAN Static dialog cont Note When configuring the VLAN ensure that the management station still has access to the device after the VLAN configuration is saved Connect the management station to a port that is a member of the VLAN that is selected as the management VLAN In the state on delivery the device transmits the management data in VLAN 1 The device automatically creates VLANs for MRP rings The MRP ring function prevents the deletion of these VLANs Note the tagging settings for ports that are part of a redundant ring Note In a redundant ring with VLANs you should only operate devices whose software version supports VLANs Buttons Button Set Table 161 Buttons 180 Mean
222. nt functions of the device is possible via the Command Line Interface CLI Possible values Off Server is deactivated On default setting Server is activated You can access the management functions of the device via SSH The server can only be started if there is an RSA or DSA signature on the device When the function is switched off existing connections remain in place However the device prevents new connections from being set up Table 58 Operation frame in the Securi ty Management Access Server dialog SSH tab page RM GUI RSPL 82 Release 2 0 02 2013 Security 2 3 Management Access Configuration Parameters Meaning Listen TCP Port Defines the number of the TCP port on which the server receives requests from clients Possible values 1 65535 default setting 22 Exception Port 2222 is reserved for internal functions The server restarts automatically after the port is changed Existing connections remain in place Session Count Shows how many connections to the server are currently set up Max Number of Defines the maximum number of connections to the server that can be set Sessions up simultaneously Possible values 1 5 default setting 5 Session Timeout Defines the timeout in minutes After the device has been inactive for this min time it ends the session for the user logged on Possible values 1 160 default setting 5 The value 0 deactivates the function The user remains log
223. ntly save the changes afterwards you open the Basic Settings Load Save dialog and click Save Set and back Transfers the changes to the volatile memory RAM of the device and goes back to the previous dialog Back Displays the previous dialog again Changes are lost Table 44 Buttons RM GUI RSPL 70 Release 2 0 02 2013 Security Button Reload Remove Create Allocate Applications Help gt gt gt lt lt lt 2 2 Authentication List Meaning Updates the fields with the values that are saved in the volatile memory RAM of the device Removes the selected table entry Adds a new table entry Displays the Allocate Applications dialog Opens the online help Moves the selected entry to the right column Moves all entries to the right column Moves the selected entry to the left column Moves all entries to the left column Table 44 Buttons cont RM GUI RSPL Release 2 0 02 2013 71 Security 2 3 Management Access 2 3 Management Access This dialog allows you to set up the server services with which users or applications can access the management functions of the device You also have the option of restricting the access for IP address ranges and individual management services The menu contains the following dialogs Server SNMPv1 v2 Community IP Access Restriction Web CLI 2 3 1 Server This dialog allows you to set up the server services with which users or applications can access
224. ntrusted Server Shows the number of DHCP server messages received with Option 82 Messages information on the untrusted interface With Option 82 Untrusted Client Shows the number of DHCP client messages received with Option 82 Messages information on the untrusted interface With Option 82 Trusted Server Shows the number of DHCP server messages received without Messages Option 82 information on the trusted interface Without Option 82 Trusted Client Shows the number of DHCP client messages received without Messages Option 82 information on the trusted interface Without Option 82 Table 289 Table in the Advanced DHCP L2 Relay Statistics dialog Buttons Button Meaning Delete Statistics Removes entries from the entire table Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 290 Buttons RM GUI RSPL Release 2 0 02 2013 297 Advanced 9 2 Telnet Client 9 2 Telnet Client This dialog opens a telnet session directly on the device Using this dialog you configure the device using CLI commands For detailed information on CLI commands review the Command Line Interface reference manual Buttons Button Meaning Help Opens the online help Table 291 Buttons RM GUI RSPL 298 Release 2 0 02 2013 Appendix A Appendix RM GUI RSPL Release 2 0 02 2013 299 Appendix A 1 Technical Data A 1 Technical Data Switching Size of MAC addre
225. o perform remote diagnosis The device uses the relay contact to signal the occurrence of events by opening the relay contact and interrupting the closed circuit In this dialog you define the trigger conditions for the signal contact The signal contact gives you the following options Monitoring the correct operation of the device Signaling the device status of the device Signaling the security status of the device Controlling external devices by manually setting the signal contacts 274 RM GUI RSPL Release 2 0 02 2013 Diagnostics 8 4 Status Configuration Signal Contact Mode Parameters Meaning Signal Contact Specifies which events the device signals via the signal contact Mode Possible values Monitoring Correct Operation default setting In this mode the signal contact signals events that occur when monitoring individual device functions The signal contact thus makes remote diagnosis possible In the Monitoring Correct Operation frame you define additional settings Manual Setting With this mode you can control the signal contact remotely In the Manual Setting frame you define additional settings Device Status In this mode the signal contact signals the overall status from the Device Status dialog The Status frame shows the status Security Status In this mode the signal contact signals the overall status from the Security Status dialog The Status frame shows the status Device Status Security Sta
226. o the device ports Table 184 Operation frame in the Redundancy Spanning Tree Global dialog Protocol Version Parameters Meaning Protocol Version Shows the protocol used for the Spanning Tree function With RSTP IEEE 802 1Q 2005 the Spanning Tree function is effective in all the configured VLANs Table 185 Protocol Version frame in the Redundancy Spanning Tree Global dialog RM GUI RSPL Release 2 0 02 2013 205 Redundancy 7 2 Spanning Tree Protocol Configuration Information Parameters Meaning Bridge ID Shows the bridge ID of the device The device with the numerically lowest bridge ID takes over the role of the root bridge in the network Possible values lt Bridge priority gt lt MAC address gt Priority Defines the bridge priority of the device Possible values 0 61440 in steps of 4096 default setting 32 768 Assign the numerically lowest priority in the network to the device to make it the root bridge Hello Time s Defines the time in seconds between the sending of two configuration messages Hello data packets Possible values 1 2 default setting 2 If the device takes over the role of the root bridge the other devices in the network use the value defined here Otherwise the device uses the value specified by the root bridge see the Root column Due to the interaction with the Tx Hold Count parameter we recommend not changing the default setting Forward D
227. ocol that the device applies for user access via SNMPv3 Possible values hmacmd5 For this user account the device uses protocol HMAC MD5 hmacsha For this user account the device uses protocol HMUAC SHA Defines the encryption protocol that the device applies for user access via SNMPVv3 Possible values none No encryption des DES encryption aesCfb128 AES 128 encryption Table 39 New Entry frame in the Security User Management dialog section x3c tblsheetnum gt of 3 Buttons Button Set Set and back Back Reload Remove Create Help Table 40 Buttons 66 Meaning Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Transfers the changes to the volatile memory RAM of the device and goes back to the previous dialog Displays the previous dialog again Changes are lost Updates the fields with the values that are saved in the volatile memory RAM of the device Removes the selected table entry Adds a new table entry Opens the online help RM GUI RSPL Release 2 0 02 2013 Security 2 2 Authentication List 2 2 Authentication List The device only allows users to access its management functions when they log in with valid login data The device authenticates the users either using the local user management or with a RADIUS server in the network With the port based
228. og you assign the IP DSCP value to the traffic classes and thus the data packets to a priority queue of the port Shows the number of priority queues per device port Every priority queue is assigned to traffic classes traffic class based on IEEE 802 1D The device supports 8 priority queues Table 167 Configuration frame in the QoS Priority Global dialog 188 RM GUI RSPL Release 2 0 02 2013 QoS Priority 6 1 Global Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 168 Buttons RM GUI RSPL Release 2 0 02 2013 189 QoS Priority 6 2 Port Configuration 6 2 Port Configuration In this dialog you define the QoS priority settings for each device port for received data packets Table Parameters Meaning Port Shows the number of the device port to which the table entry relates Port Priority Defines the port priority The device exchanges the data packets received on the port according to the assigned traffic class Possible values 0 7 default setting 0 Prerequisite In the Trust Mode column you have selected the value as follows untrusted or trustDotlp The data packets do not contain a VLAN tag or priority tag o
229. ogical subnetworks This provides you with the following advantages High flexibility With VLAN you distribute the data traffic to logical networks in the existing infrastructure Without VLAN it would be necessary to have additional devices and complicated cabling With VLAN you define network segments independently of the location of the individual terminal devices Improved throughput In VLANs data packets can be transferred by priority If the priority is high the device transfers the data traffic of a VLAN preferentially e g for time critical applications such as VoIP phone Calls The network load is considerably reduced if data packets and Broadcasts are distributed in small network segments instead of in the entire network Increased security The distribution of the data traffic among individual logical networks makes unwanted accessing more difficult and strengthens the system against attacks such as MAC Flooding or MAC Spoofing The device supports packet based tagged VLANs according to the IEEE 802 1Q standard The VLAN tagging in the data packet indicates the VLAN to which the data packet belongs The device transmits the tagged data packets of a VLAN exclusively via ports that are assigned to the same VLAN This reduces the network load Depending on the settings we differentiate between the following VLANs Static VLANs VLANs set up manually by the user Dynamic VLANs VLANs set up automatica
230. on Parameters Meaning Operation When the function is switched on the device operates as an SNTP server Possible values On Off default setting Note the setting in the Disable Server at local Time Source checkbox in the Configuration frame Table 121 Operation frame in the Time SNTP Server dialog Configuration Parameters Meaning Listen UDP Port Defines the number of the UDP port on which the SNTP server of the device receives requests from other clients Possible values 1 65535 default setting 123 Exception Port 2222 is reserved for internal functions Table 122 Configuration frame in the Time SNTP Server dialog RM GUI RSPL Release 2 0 02 2013 139 Time Parameters Broadcast Admin Mode Broadcast Destination Address Broadcast Port Broadcast VLAN ID Broadcast Send Interval s Disable Server at local Time Source 3 2 SNTP Meaning Activates deactivates the Broadcast mode Selected The SNTP server replies to requests from SNTP clients in Unicast mode and also sends SNTP packets in Broadcast mode as Broadcasts or Multicasts Not selected default setting The SNTP server replies to requests from SNTP clients in the Unicast mode Defines the IP address to which the SNTP server of the device sends the SNTP packets in Broadcast mode Possible values Valid IPv4 address default setting 0 0 0 0 Broadcast and Multicast addresses are permitted Defines the number of the UDP port
231. on you need to start operating the device It takes you step by step from the first startup operation through to the basic settings for operation in your environment The Redundancy Configuration user manual document contains the information you require to select the suitable redundancy procedure and configure it The HiView user manual contains information for using the HiView GUI application This application allows you to use the graphical user interface of Hirschmann devices with management independently of other applications such as a browser RM GUI RSPL Release 2 0 02 2013 7 About this Manual The Industrial HiVision Network Management Software provides you with additional options for smooth configuration and monitoring Simultaneous configuration of multiple devices Graphical user interface with network layout Auto topology discovery Event log Event handling Client server structure Browser interface ActiveX control for SCADA integration SNMP OPC gateway RM GUI RSPL 8 Release 2 0 02 2013 Key Key The designations used in this manual have the following meanings List O Work step Subheading Link Cross reference with link Note A note emphasizes an important fact or draws your attention to a dependency Courier ASCII representation in user interface RM GUI RSPL Release 2 0 02 2013 Key RM GUI RSPL 10 Release 2 0 02 2013 Graphical User Interface Graphical User Interface System req
232. onfiguration frame in the Basic Settings Network IP Address Conflict Detection dialog cont RM GUI RSPL Release 2 0 02 2013 33 Basic Settings 1 2 Network Information Parameters Meaning Conflict detected Shows whether an address conflict currently exists Possible values Selected The device detects an address conflict Not selected default setting The device does not detect an address conflict Table 17 Information frame in the Basic Settings Network IP Address Conflict Detection dialog Table Parameters Meaning Time Stamp Shows the time at which the device detected an address conflict Port Shows the number of the device port on which the device detected the address conflict IP Address Shows the IP address that is causing the address conflict MAC Address Shows the MAC address of the device with which the address conflict exists Table 18 Table in the Basic Settings Network IP Address Conflict Detection dialog Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 19 Buttons RM GUI RSPL 34 Release 2 0 02 2013 Basic Settings 1 3 Software 1 3 Software This dialog allows you to update the device software and display i
233. oon Bosselaers lt antoon bosselaers esat kuleuven ac be gt author Paulo Barreto lt paulo barreto terra com br gt This code is hereby placed in the public domain THIS SOFTWARE IS PROVIDED BY THE AUTHORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED INNO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE RM GUI RSPL Release 2 0 02 2013 315 Appendix A 8 Copyright of Integrated Software 5 One component of the ssh source code is under a 3 clause BSD license held by the University of California since we pulled these parts from original Berkeley code Copyright c 1983 1990 1992 1993 1995 The Regents of the University of California All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redi
234. ork Global dialog RM GUI RSPL 26 Release 2 0 02 2013 Basic Settings 1 2 Network HiDiscovery Protocol This frame allows you to define settings for the access to the device using the HiDiscovery protocol On aPC the HiDiscovery software shows you the Hirschmann devices in the network that can be accessed on which the HiDiscovery function is switched on You can access these devices even if they have invalid IP parameters or none at all The HiDiscovery software allows you to change the IP parameters in the device Parameters Meaning Operation Activates deactivates the HiDiscovery function in the device Possible values On default setting HiDiscovery is activated You can use the HiDiscovery software to access the device from your PC Off HiDiscovery is deactivated Access Activates deactivates the write access to the device using HiDiscovery Possible values readWrite default setting The HiDiscovery software is given write access to the device With this setting you can change the IP parameters in the device readOnly The HiDiscovery software is given only read access to the device With this setting you can view the IP parameters in the device Recommendation Only change the setting to readOn1y after putting the device into operation Table 9 HiDiscovery Protocol frame in the Basic Settings Network Global dialog Note With the HiDiscovery software you can only access the device via device ports
235. orm for each device port how many data packets the device has sent and received To reset the values in the table to 0 click Reset port counters in the Basic Settings Restart dialog Buttons Button Meaning Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Reset port counters Resets the counter for the port statistics to 0 Help Opens the online help Table 228 Buttons RM GUI RSPL 246 Release 2 0 02 2013 Diagnostics 8 3 Ports 8 3 2 Utilization This dialog displays the utilization network load for the individual device ports Table Parameters Port Utilization Lower Threshold Upper Threshold Control Interval s Alarm Meaning Shows the number of the device port to which the table entry relates Shows the current utilization in percent in relation to the time interval specified in the Control Interval s column The utilization is the relationship of the received data quantity to the maximum possible data quantity at the currently configured data rate Defines a lower threshold for the utilization If the utilization of the device port falls below this value the Alarm field shows an alarm Possible values 0 00 100 00 default setting 0 00 The value 0 deactivates the lower threshold Defines an upper threshold for the utilization If the utilization of the device port exceeds this value the Alarm field shows an alarm
236. ory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 128 Buttons RM GUI RSPL 148 Release 2 0 02 2013 Switching 5 Switching With this menu you can configure the settings for the switching The menu contains the following dialogs Global Rate Limiter Filter for MAC addresses IGMP VLAN RM GUI RSPL Release 2 0 02 2013 149 Switching 5 1 Global 5 1 Global This dialog allows you to define the following settings Change the aging time of the address table forwarding database Switch on the flow control in the device Switch on the VLAN Unaware Mode If many large data packets are received in the sending queue of a port this can cause the port memory to overflow This happens for example when the device receives data at a Gigabit port and forwards it to a port with a lower bandwidth The device discards surplus data packets The flow control mechanism described in standard IEEE 802 3 ensures that no data packets are lost due to a port memory overflowing Shortly before a port memory is completely full the device signals to the connected devices that it is not accepting any more data packets from them In full duplex mode the device sends a pause data packet In half duplex mode the device simulates a colli
237. owing special characters 1 amp 5 lt gt M_ G The minimum length of the password is defined in the Password Policy frame The device differentiates between upper and lower case When the checkbox in the Policy Check field is selected the device checks the password according to the policy defined in the Password Policy frame The device always checks the minimum length of the password even if the checkbox in the Policy Check field is not selected Table 38 Table in the security User Management dialog section 62 x3c tblsheetnum gt of 3 RM GUI RSPL Release 2 0 02 2013 Security Parameters Access Role User locked Policy Check SNMP Auth Type 2 1 User Management Meaning Defines the access role that regulates the user s access to the individual functions of the device Possible values guest The user is authorized to monitor the device operator The user is authorized to monitor and configure the device with the exception of security settings for the access to the device administrator The user is authorized to monitor and configure the device unauthorized The user is locked and the device rejects the user s login You assign this value to temporarily lock the user account If an error occurs when another access role is being assigned the device assigns this access role to the user account Locks unlocks the user s access to the management functions of the device Po
238. p 115 Security 2 6 RADIUS 2 6 RADIUS With its factory settings the device authenticates users based on the local user management However as the size of a network increases it becomes more difficult to keep the login data of the users consistent across the devices RADIUS Remote Authentication Dial In User Service allows you to manage the users at a central location in the network A RADIUS server performs the following tasks here Authentication The authentication server authenticates the users when the RADIUS client at the access point forwards the users login data to the server Authorization The authentication server authorizes logged in users for selected services by assigning various parameters for the relevant terminal device to the RADIUS client at the access point Accounting The accounting server records the traffic data that has occurred during the port authentication according to IEEE 802 1X This enables you to subsequently determine which services the users have used and to what extent The device works in the role of the RADIUS client if you have assigned the radius policy to an application in the Security Authentication List dialog The device forwards the users login data to the primary authentication server The authentication server decides whether the login data is valid and transfers the user s authorizations to the device The device also allows you to authenticate terminal devices with IEEE 802 1
239. pdates the fields with the values that are saved in the volatile memory RAM of the device Opens the online help 217 Redundancy 7 2 Spanning Tree RM GUI RSPL 218 Release 2 0 02 2013 Diagnostics 8 Diagnostics The dialogs in this menu show information on statuses and events that the device has logged In service cases this information helps our support to diagnose the situation The menu contains the following dialogs System Report Ports Status Configuration LLDP RM GUI RSPL Release 2 0 02 2013 219 Diagnostics 8 1 System 8 1 System The dialogs in this menu allow you to display the current operating conditions to verify that the device configuration conforms to the network environment and control the behavior of the device upon start up The menu contains the following dialogs System Information Configuration Check Selftest 8 1 1 System Information This dialog displays the current operating condition of individual components in the device The displayed values are a snapshot they represent the operating condition at the time the dialog was loaded to the page The dialog allows you to search the page for search terms and save them in HTML format on your PC Buttons Button Meaning Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Search Opens the Search dialog The dialog allows you to search the log file for search terms or regular expressions
240. pen the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Reset Resets the port monitor function for the selected interface and enables the port when disabled by the Port Monitor function Help Opens the online help Table 243 Buttons RM GUI RSPL Release 2 0 02 2013 257 Diagnostics 8 3 Ports 8 3 9 Auto Disable If the configuration shows a port as enabled but the device detects an error the software shuts down that port In other words the device software disables the port because of a detected error condition When a port is auto disabled the device effectively shuts down the port and the port blocks traffic The port LED blinks green 1 time per period and identifies the reason for the shutdown In addition the device generates a log entry listing the reason for the auto disable Furthermore the device sends a trap with the interface number the port status and the reason to the administrator When you enable the port after a timeout by auto disable the device sends a trap with the interface number and an empty Reason entry This feature provides a recovery function which automatically enables an auto disabled port after a user defined time When this function enables a port the device sends a trap with the interface number and an empty Reason entry The auto disable function serves 2 purposes It assists the adminis
241. plication from a permitted IP address range Operation Parameters Meaning Operation If the function is switched on the access to the management functions of the device is restricted Possible values off default setting On Access to the management functions of the device is restricted Table 66 Operation frame in the Securi ty Management Access IP Access Restriction dialog RM GUI RSPL Release 2 0 02 2013 87 Security 2 3 Management Access Note Before switching on the function make sure that at least one active entry in the table allows you access Otherwise the connection to the device terminates when you change the device configuration It is then only possible to access the management functions using CLI via the V 24 interface of the device Table You have the option of defining up to 16 table entries and activating them separately Parameters Meaning Index Shows a sequential number to which the table entry relates The device automatically defines this number Possible values 1 16 When you delete a table entry this leaves a gap in the numbering When you create a new table entry the device fills the first gap IP Address Range Specifies the IP address range for which you define the access to the management functions with this table entry Possible values Valid IPv4 address and netmask in CIDR notation 0 0 0 0 0 default setting for all newly created entries HTTP Activates deactivat
242. profile The device calculates the checksum when saving the settings and inserts it into the configuration profile Table 28 Table in the Basic Settings Load Save dialog section x3c tblsheetnum gt of 3 RM GUI RSPL 44 Release 2 0 02 2013 Basic Settings 1 4 Load Save Parameters Meaning Fingerprint Verified Shows whether the checksum in the configuration profile is valid The device calculates the checksum again and compares it with the checksum in the configuration profile Possible values Selected The saved settings are consistent The checksums match Not selected The configuration profile contains modified settings The checksums are different Possible causes The file is damaged The file system on the external memory is inconsistent A user has exported the configuration profile and changed the XML file outside the device Note This function identifies changes to the settings in the configuration profile The function does not provide protection against operating the device with modified settings Table 28 Table in the Basic Settings Load Save dialog section x3c tblsheetnum gt of 3 Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Save Transfer
243. r Telnet This tab allows you to define settings for the Telnet server of the device and to switch the server on off The Telnet server enables access to the management functions of the device with the Command Line Interface via a Telnet connection Operation Parameters Meaning Operation If the function is switched on the Telnet server is activated Possible values Off Server is deactivated On default setting Server is activated You can access the management functions of the device via Telnet Table 47 Operation frame in the Security Management Access Server dialog Telnet tab page Configuration Parameters Meaning Listen TCP Port Defines the number of the TCP port from which the server receives requests from clients Possible values 1 65535 default setting 23 Exception Port 2222 is reserved for internal functions The server restarts automatically after the port is changed Existing connections remain in place Connection Count Shows how many clients are currently logged on to the server Possible values O05 Table 48 Configuration frame in the Security Management Access Server dialog Telnet tab page section x3c tblsheetnum gt of 2 RM GUI RSPL Release 2 0 02 2013 75 Security Parameters Max Number of Connections Session Timeout min 2 3 Management Access Meaning Defines how many clients can be logged on to the server at the same time Possible values 0 5 Defines the
244. r trustIpDscp The data packets are not IP packets The QoS Priority 802 1D p Mapping dialog shows which traffic class has been assigned to the respective VLAN priority The device assigns the data packets to a traffic class depending on their VLAN priority and thereby sorts them in the priority queue Table 169 Table in the QoS Priority Port Configuration dialog RM GUI RSPL 190 Release 2 0 02 2013 QoS Priority Parameters Trust Mode Untrusted Traffic Class 6 2 Port Configuration Meaning Defines how the device handles received data packets that contain QoS priority information Possible values untrusted The device ignores the QoS priority information contained in the data packets and prioritizes them according to the value entered in the Port Priority column trustDot1p default setting Data packets with a VLAN tag are prioritized by the device according to the QoS priority information contained in the data packet The QoS Priority 802 1D p Mapping dialog shows the traffic class to which the respective VLAN priority is assigned The device assigns the data packets to a traffic class depending on their VLAN priority and thereby sorts them in the priority queue Data packets without a VLAN tag are prioritized by the device according to the value defined in the Port Priority column trustIpDscp The device prioritizes IP data packets according to their DSCP value The QoS Priority IP DSCP Mapp
245. r a derivative thereof from the apps directory application code you must include an acknowledgement This product includes software written by Tim Hudson tjh cryptsoft com THIS SOFTWARE IS PROVIDED BY ERIC YOUNG AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE The licence and distribution terms for any publically available version or derivative of this code cannot be changed i e this code cannot simply be copied and put under another distribution licence including the GNU Public Licence RM GUI RSPL 324 Release 2 0 02 2013 Appendix A 8 Copyright of Integrated Software A 8 7 Parts of the FreeBSD IP stack Copyright c 1990 1993 The Regents of the University of California All rights reserved Redistribution and use in source and binary forms with or wi
246. r the associated operating software In addition we refer to the conditions of use specified in the license contract You can get the latest version of this manual on the Internet at the Hirschmann product site www hirschmann com Printed in Germany Hirschmann Automation and Control GmbH Stuttgarter Str 45 51 72654 Neckartenzlingen Germany Tel 49 1805 141538 Rel 2 0 02 2013 11 02 2013 Contents Contents About this Manual Key Graphical User Interface 1 Basic Settings 1 1 System 1 2 Network 1 2 1 Global 1 2 2 ARP Table 1 2 3 IP Address Conflict Detection 1 3 Software 1 4 Load Save 1 5 External Memory 1 6 Port Configuration 1 7 Restart 2 Security 2 1 User Management 2 2 Authentication List 2 3 Management Access 2 3 1 Server 2 3 2 Server SNMP 2 3 3 Server Telnet 2 3 4 Server HTTP 2 3 5 Server HTTPS 2 3 6 Server SSH 2 3 7 SNMPv1 v2 Community 2 3 8 IP Access Restriction 2 3 9 Web 2 3 10 CLI 2 3 11 CLI Global 2 3 12 CLI Login Banner 2 4 Port Security RM GUI RSPL Release 2 0 02 2013 Contents 2 5 2 6 2 7 3 1 3 2 5 1 5 2 5 3 5 4 5 5 2 1X Port Authentication 5 1 802 1X Global 5 2 Port Configuration 5 3 Port Clients 5 4 Statistics 5 5 5 6 AD oO Port Authentication History Integrated Authentication Server 6 1 Global 6 2 Authentication Server 6 3 Accounting Server 6 4 Authentication Statistics 6 5 Accounting Statistics NNNNND YNNNNNN Pre login
247. rail Output of CLI commands show port all show system info show mac addr table show mac filter table igmp snooping Default device configuration Device configuration Support Information System information Log file File name audittrail html CLICommands txt defaultconfig xml runningconfig xml supportinfo html systeminfo html systemlog html Format HTML Text XML XML Text HTML HTML Comments Chronological recording of system events and writing user actions Prerequisite The Telnet server of the device is switched on Device configuration with the plant settings Device configuration that the device uses in the current operation Device internal service information Table 205 Support Information Files contained in the ZIP archive RM GUI RSPL Release 2 0 02 2013 231 Diagnostics 8 2 Report Meaning of the severities for events Severity Meaning emergency Device not ready for operation alert Immediate user intervention required critical Critical status error Error status warning Warning notice Significant normal status informational Informal message debug Debug message Table 206 Meaning of the severities for events 8 2 2 Email Logging Global The device allows you to configure the following Email Alert features You configure log messages for an urgent severity level at and above which the device sends the logs as urgent messages The device sends u
248. rded them Table 103 RADIUS Authentication Statistics dialog table 122 RM GUI RSPL Release 2 0 02 2013 Security 2 6 RADIUS Buttons Button Meaning Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 104 Buttons 2 6 5 Accounting Statistics This dialog shows information about the communication between the device and the accounting server The table shows the information for each server in a separate row To delete the statistics click Clear RADIUS Statistics inthe Security RADIUS Global dialog Table Parameters Meaning Name Shows the name of the server Address Shows the IP address of the server Round Trip Time Shows the time interval in hundredths of a second between the last response received from the server Accounting Response and the corresponding data packet sent Accounting Request Accounting Shows the number of accounting request data packets that the device Request Packets sent to the server This value does not take repetitions into account Retransmitted Shows the number of accounting request data packets that the device Accounting retransmitted to the server Request Packets Received Packets Shows the number of accounting response data packets that the device received from the server Table 105 RADIUS Accounting Statistics dialog table RM GUI RSPL Release 2 0 02 2013 123 Security Parameters
249. rgent messages immediately to the mail server You configure log messages for a non urgent severity level at and above which the device sends the logs as non urgent messages Furthermore configure the non severity level to a level below the severity level The device stores the non urgent messages in a log buffer then sends the logs to the server at the configured time interval or when the buffer is full You classify log messages as urgent and non urgent to decide whether the device sends email immediately or periodically RM GUI RSPL 232 Release 2 0 02 2013 Diagnostics 8 2 Report Operation Parameters Meaning Operation Activates deactivates the Email Logging function globally on the device Possible values On Off default setting Table 207 Operation frame in the Diagnostics Report Email Logging Global dialog Information Parameters Meaning Number of Failed Shows the number of dropped email alerts Emails Number of Email Shows the number of successfully sent email alerts Alerts Last Mail Sent Shows the time in seconds since last sent email alert Table 208 Information frame in the Diagnostics Report Email Logging Global dialog Configuration Parameters Meaning Sender Shows the email address from which the device sends the email Possible values switch hirschmann com default setting Sending Interval Shows the count down timer in minutes until the next email alert Possible values
250. ring as advertised by the remote endpoint Table 283 Table in the LLDP MED tab of the Diagnostics LLDP Topology Discovery dialog 290 RM GUI RSPL Release 2 0 02 2013 Diagnostics 8 5 LLDP Parameters Meaning Firmware Revision Shows the vendor specific firmware revision string as advertised by the remote endpoint Software Revision Shows the vendor specific software revision string as advertised by the remote endpoint Serial Number Shows the vendor specific serial number as advertised by the remote endpoint Manufacturer Name Shows the vendor specific manufacturer name as advertised by the remote endpoint Model Name Shows the vendor specific model name as advertised by the remote endpoint Asset ID Shows the vendor specific asset tracking identifier as advertised by the remote endpoint Table 283 Table in the LLDP MED tab of the Diagnostics LLDP Topology Discovery dialog cont Buttons Button Meaning Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 284 Buttons RM GUI RSPL Release 2 0 02 2013 291 Diagnostics 8 5 LLDP RM GUI RSPL 292 Release 2 0 02 2013 Advanced 9 Advanced With this menu you can configure additional settings for the device The menu contains the following dialogs DHCP L2 Relay Telnet Client RM GUI RSPL Release 2 0 02 2013 293 Advanced 9 1 DHCP L2 Relay 9 1 DHCP L2 Relay
251. rms the VLAN configuration for this port If the MRP Ring configuration is not assigned to a VLAN select the port VLAN ID 1 Buttons Button Set Reload Meaning Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Updates the fields with the values that are saved in the volatile memory RAM of the device Table 163 Buttons 182 RM GUI RSPL Release 2 0 02 2013 Switching 5 5 VLAN Button Meaning Help Opens the online help Table 163 Buttons cont 5 5 5 Voice Use the Voice VLAN feature to separate voice and data traffic on a port by VLAN and or priority A primary benefit of Voice VLAN is safeguarding the quality of voice traffic when data traffic on the port is high The device detects VoIP devices via Link Layer Discovery Protocol Media Endpoint Discovery LLDP MED The device then adds the appropriate switch port to the member set of the configured Voice VLAN The member set is either a tagged or an untagged member Tagging depends on the Voice VLAN interface mode VLAN ID Dot1p None Untagged Another benefit of the Voice VLAN feature is that the VOIP device obtains VLAN ID or priority information via LLDP MED from the switch As a result the phone sends voice data tagged as priority or untagged depending on the configured Voice VLAN Interface mode You configure the switch to suppo
252. rning on this port Adjust the value to the number of expected senders Possible values 0 600 default setting 600 The value 0 deactivates the automatic recording of the senders on this port Specifies the upper limit for the number of senders connected to the port Static Addresses The Wizard helps you to connect the port with one or more desired senders Possible values 0 64 default setting 64 The value 0 prevents you from connecting a sender with the port Shows the number of automatically recorded senders Dynamic Addresses Shows the number of senders connected to the port Static Addresses Shows the VLAN ID and MAC address of an undesired sender whose data packets the device last discarded on this port Shows the number of discarded data packets on this device port that caused the device to send an SNMP message trap Table 77 Table in the security Port Security dialog cont RM GUI RSPL Release 2 0 02 2013 97 Security Buttons Button Set Reload Wizard Help Table 78 Buttons 2 4 Port Security Meaning Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Updates the fields with the values that are saved in the volatile memory RAM of the device Opens the Wizard With the Wizard you assign the permitted MAC addresses to a port Opens the o
253. rt Voice VLAN on a port that is connecting to the VOIP phone Operation Parameters Meaning Operation Activates deactivates the Voice VLAN function globally on the device Possible values On Off default setting Table 164 Operation frame in the switching VLAN Voice dialog RM GUI RSPL Release 2 0 02 2013 183 Switching Table Parameters Port Voice VLAN Mode Data Priority Mode Status VLAN ID 5 5 VLAN Meaning Shows the number of the device port to which the table entry relates Defines whether the port transmits or discards received data packets without Voice VLAN tagging or data packets with Voice VLAN priority information Possible values disable default setting Disables the Voice VLAN function for this table entry none Allows the IP phone to use its own configuration to send untagged voice traffic vlan dotlp priority The port filters Voice VLAN data packets based on vian and dot1p priority tagging untagged The port filters data packets without a Voice VLAN tag vlan The port filters Voice VLAN data packets based on vlan tagging dotlp The port filters Voice VLAN data packets based on dot1p tagging Configure the Priority value when using this option Defines the trust mode for data traffic on the port The device uses this mode for data traffic on the Voice VLAN when co locating a VoIP phone and PC and both use the same cable to transmit data Possible values trust default s
254. rval Defines the time in seconds after which the device generates general query data packets itself when it has received query data packets from the Multicast router Possible values 1 1800 default setting 60 Table 150 Configuration frame in the switching IGMP Querier dialog RM GUI RSPL 170 Release 2 0 02 2013 Switching Parameters Expiry Interval 5 4 IGMP Meaning Defines the time in seconds after which an active querier switches from the passive state back to the active state if it has not received any query packets for longer than the expiry interval Possible values 60 300 default setting 125 Table 150 Configuration frame in the switching IGMP Querier dialog cont Table In the table you define the Snooping Querier settings for the VLANs that are set up Parameters VLAN ID Active Current State Election Participate Mode Meaning Shows the ID of the VLAN to which the table entry applies Activates deactivates the IGMP Snooping Querier function for this VLAN Possible values off default setting The IGMP Snooping Querier function is deactivated for this VLAN Active The IGMP Snooping Querier function is activated for this VLAN Shows whether the Snooping Querier is actually active for this VLAN Possible values inactive default setting Active The Snooping Querier is active for this VLAN Off The Snooping Querier function is inactive for this VLAN Activates deactiv
255. s for end device ports where few MAC address changes occur Operation Parameters Meaning Operation Activates deactivates the MAC Notification function globally on the device Possible values On The device sends traps for the active rows to the active management stations in Diagnostics Status Configuration Alarms Traps off default setting Table 270 Operation frame in the Diagnostics Status Configuration MAC Notification dialog Configuration Parameters Meaning Intervals s Defines the interval in seconds between notifications The device buffer contains up to 20 addresses If the buffer is full before the interval expires then the device sends a trap to the management station Possible values 0 2147483647 Table 271 Configuration frame in the Diagnostics Status Configuration MAC Notification dialog RM GUI RSPL 280 Release 2 0 02 2013 Diagnostics 8 4 Status Configuration Table Parameters Meaning Port Shows the number of the device port to which the table entry relates Active Activates deactivates the MAC Notification function on this port Possible values Selected When globally activated the device sends traps for this row to the active management stations in Diagnostics Status Configuration Alarms Traps Not selected default setting MAC Address Shows the last MAC addresses added or removed from the address table for this interface When the field contains 20 addresses the device sends a trap to th
256. s the information on Layer 2 L Activate the IGMP Snooping function not until the following conditions are fulfilled There is a Multicast router in the network that creates IGMP queries periodic queries The devices participating in IGMP Snooping forward the IGMP queries The device links the IGMP reports with the entries in its address table forwarding database If a Multicast receiver joins a Multicast group report the device creates a table entry in the Switching Filters for MAC Addresses dialog for this port If the Multicast receiver leaves the Multicast group the device removes the table entry again The menu contains the following dialogs Snooping IGMP Snooping Enhancements IGMP Querier Multicasts RM GUI RSPL 160 Release 2 0 02 2013 Switching 5 4 IGMP 5 4 1 Snooping This dialog allows you to activate the IGMP Snooping protocol in the device and also configure it for each port and each VLAN Operation Parameters Meaning Operation When the function is switched on the IGMP Snooping function according to RFC 4541 Considerations for Internet Group Management Protocol IGMP and Multicast Listener Discovery MLD Snooping Switches is activated in the device Possible values On When the function is switched on the IGMP Snooping protocol is activated globally in the device off default setting When the function is switched off the device transmits received query report and leave data packets
257. s the settings from the volatile memory RAM into the configuration profile designated as Selected in the non volatile memory NVM If the checkbox in the Auto save config on ENVM field is selected in the Basic Settings External Memory dialog the device generates a copy of the configuration profile on the external memory Table 29 Buttons section x3c tblsheetnum gt of 5 RM GUI RSPL Release 2 0 02 2013 45 Basic Settings Button Activate Delete 1 4 Load Save Meaning Loads the settings of the configuration profile selected in the table to the volatile memory RAM The device terminates the connection to the graphical user interface L Reload the graphical user interface O Login again The device immediately uses the settings of the configuration profile in the current operation Switch on the function Undo Modifications of Configuration before you activate another configuration profile If the connection is lost afterwards the device loads the last configuration profile designated as Selected from the non volatile memory NVM The device can then be accessed again If the configuration encryption is inactive the device loads the configuration profile only if it is unencrypted If the configuration encryption is active the device loads the configuration profile only if it is encrypted and the password matches the password stored in the device When you activate an older configuration profile the
258. setting 3600 If this function is switched on the authenticator periodically requests the terminal device to login again Possible values Selected Periodically requests the terminal device to login again You specify this time period in the Reauthentication Period s field This setting becomes ineffective if the authenticator has assigned the terminal device the ID of a Voice Unauthenticated or Guest VLAN Not selected default setting Keeps the terminal device logged in Table 86 Table in the Security 802 1X Port Authentication Port Configuration dialog section x3c tblsheetnum gt of 5 RM GUI RSPL Release 2 0 02 2013 107 Security Parameters Guest VLAN ID Guest VLAN Period Unauthenticated VLAN ID 2 5 802 1X Port Authentication Meaning Specifies the ID of the VLAN that the authenticator assigns to the port if the terminal device does not login during the time period specified in the Guest VLAN Period field This value only applies if the value auto is specified for the port in the Port Control column This function allows you to grant terminal devices without 802 1X support access to selected services in the network Possible values 0 4042 default setting 0 The effect of the value 0 is that the authenticator does not assign a guest VLAN to the port When you switch on the function in the MAC Authorized Bypass Enabled field the device automatically sets the value to 0 Note Only assig
259. several devices for example via a hub the table contains 1 line for each connected device Parameters Meaning Port Shows the number of the device port to which the table entry relates Neighbor Identifier Shows the chassis ID of the neighboring device This can be the basis MAC address of the neighboring device for example Neighbor IP Shows the IP address with which the management functions of the Address neighboring device can be reached Neighbor Port Shows a description for the device port of the neighboring device Description Neighbor System Shows the device name of the neighboring device Name Table 281 Table in the LLDP tab of the Diagnostics LLDP Topology Discovery dialog RM GUI RSPL 288 Release 2 0 02 2013 Diagnostics 8 5 LLDP Parameters Port ID Meaning Shows the ID of the device port through which the neighboring device is connected to the device Shows whether the device port of the neighboring device supports Autonegotiation Supported autonegotiation Shows whether autonegotiation is enabled on the device port of the Autonegotiation Enabled PoE Supported neighboring device Shows whether the device port of the neighboring device supports Power PoE Enabled over Ethernet PoE Shows whether Power over Ethernet PoE is enabled on the device port of the neighboring device Table 281 Table in the LLDP tab of the Diagnostics LLDP Topology Discovery dialog cont
260. shows the operating mode connection state bit rate and duplex mode for every device port Table Parameters Meaning Port Shows the number of the device port to which the table entry relates Name Name of the device port Enter the name of your choice Possible values 0 64 alphanumeric characters Port on Activates deactivates the device port Possible values Selected default setting The device port is activated Not selected The device port is deactivated The device port does not send or receive any data State Shows whether the device port is currently physically switched on or off Possible values Selected The device port is switched on Not selected The device port is switched off If the Port on function is switched on the Auto Disable function has switched off the device port You define the settings for the Auto Disable function in the Diagnostics Ports Auto Disable dialog Table 32 Table in the Basic Settings Port Configuration dialog section x3c tblsheetnum gt of 4 RM GUI RSPL Release 2 0 02 2013 53 Basic Settings Parameters Power State Port off Auto Power Down Automatic Configuration 1 6 Port Configuration Meaning Physically switches off the device port or leaves it on when you deactivate the Port on function Possible values Selected The device port remains physically switched on A connected device receives an active link Not selected default setting T
261. sion Then the connected devices do not send any more data packets for as long as the signaling takes On uplink ports this can possibly cause undesired sending breaks in the higher level network segment wandering backpressure According to standard IEEE 802 1Q the device forwards data packets with a VLAN tag in a VLAN 21 However a small number of applications on connected terminal devices send or receive data packets with a VLAN ID 0 When the device receives one of these data packets before forwarding it the device overwrites the original value in the data packet with the VLAN ID of the receiving port When you switch on the VLAN Unaware Mode this deactivates the VLAN settings in the device The device then transparently forwards the data packets on all ports and only evaluates the priority information contained in the data packet RM GUI RSPL 150 Release 2 0 02 2013 Switching 5 1 Global Configuration Parameters Meaning MAC Address Displays the MAC address of the device Aging Time s Activate Flow Control Defines the aging time in seconds Possible values 10 500000 default setting 30 The device monitors the age of the learned Unicast MAC addresses Address entries that exceed a particular age aging time are deleted by the device from its address table FBD Forwarding Database You will find the address table in the Switching Filter for MAC addresses dialog In connection with the router redundancy
262. ss table incl static filters Max number of statically configured MAC address filters Max number of MAC address filters learnable via IGMP Snooping MTU Max length of over long packets Latency with 64 Byte data packets 1 000 Mbit s 100 Mbit s 10 Mbit s Number of Switch queues Port priorities that can be set VLAN VLAN ID Number of VLANs 300 4096 4k 100 256 2000 Bytes Layer 2 typ 1 4 us Layer 2 typ 2 1 us Layer 2 typ 2 5 us 8 queues 0 7 1 4042 max 128 simultaneously per device max 128 simultaneously per port RM GUI RSPL Release 2 0 02 2013 Appendix A 2 List of RFCs A 2 List of RFCs RFC 768 RFC 783 RFC 791 RFC 792 RFC 793 RFC 826 RFC 854 RFC 855 RFC 951 RFC 1112 RFC 1157 RFC 1155 RFC 1212 RFC 1213 RFC 1493 RFC 1542 RFC 1643 RFC 1757 RFC 1867 RFC 1901 RFC 1905 RFC 1906 RFC 1945 RFC 2068 RFC 2131 RFC 2132 RFC 2233 RFC 2236 RFC 2246 RFC 2346 RFC 2365 RFC 2474 RFC 2475 RFC 2578 RFC 2579 RFC 2580 RFC 2613 RFC 2618 RM GUI RSPL UDP TFTP IP ICMP TCP ARP Telnet Telnet Option BOOTP IGMPv1 SNMPv1 SMlv1 Concise MIB Definitions MIB2 Dotid BOOTP Extensions Ethernet like MIB RMON Form Based File Upload in HTML Community based SNMP v2 Protocol Operations for SNMP v2 Transport Mappings for SNMP v2 HTTP 1 0 HTTP 1 1 protocol as updated by draft ietf http v11 spec rev 03 DHCP DHCP Options The Interfaces Group MIB usi
263. ssible values Selected The user s access is locked The device automatically locks a user if the user makes too many unsuccessful login attempts Not selected The user s access is unlocked Defines whether the device checks the password according to the defined policy when it is being set up or changed Possible values Selected The device checks the password according to the policy defined in the Password Policy frame Not selected The device accepts the password without checking it Defines the authentication protocol that the device applies for user access via SNMPvs3 Possible values hmacmd5 For this user account the device uses protocol HMAC MDB5 hmacsha For this user account the device uses protocol HMUAC SHA Table 38 Table in the security User Management dialog section x3c tblsheetnum gt of 3 RM GUI RSPL Release 2 0 02 2013 63 Security Parameters SNMP Encryption Type 2 1 User Management Meaning Defines the encryption protocol that the device applies for user access via SNMPVv3 Possible values none No encryption des DES encryption aesCfb128 AES 128 encryption Table 38 Table in the security User Management dialog section x3c tblsheetnum gt of 3 New Entry In this frame you set up a new user account To display the frame you click the Create button Parameters User Name Active Meaning Specifies the name of the user account Possible values 1 32
264. stem Log Audit Trail RM GUI RSPL 226 Release 2 0 02 2013 Diagnostics 8 2 Report 8 2 1 Global The device allows you to log specific events using the following outputs on the console on one or more syslog servers on a CLI connection set up using SSH on a CLI connection set up using Telnet You define the required settings in this dialog By assigning the severity you define which events the device logs The buttons in the dialog allow you to save a ZIP archive with system information and the Java Applet of the graphical user interface GUI on your PC Console Logging Parameters Meaning Operation When the function is switched on the device logs the events on the console Possible values On Off default setting Severity Defines the minimum severity for the events The device logs all events with this severity and with more urgent severities The device outputs the messages on the V 24 interface Possible values emergency alert critical error warning default setting notice informational debug Table 200 Console Logging frame in the Diagnostics Report Global dialog RM GUI RSPL Release 2 0 02 2013 227 Diagnostics 8 2 Report Buffered Logging The device buffers logged events in 2 separate storage areas so that the log entries for urgent events are kept This dialog allows you to define the minimum severity for events that the device buffers in the storage area with a higher priority Para
265. stributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE RM GUI RSPL 316 Release 2 0 02 2013 Appendix A 8 Copyright of Integrated Software 6 Remaining components of the software are provided under a stan
266. t 1 SNMP manager Table 238 Table in the Global tab of the Diagnostics Ports Port Monitor dialog RM GUI RSPL Release 2 0 02 2013 253 Diagnostics Parameters Port Status 8 3 Ports Meaning Shows the status of the port Possible values up down notPresent Table 238 Table in the Global tab of the Diagnostics Ports Port Monitor dialog Buttons Button Set Reload Reset Help Table 239 Buttons Meaning Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Updates the fields with the values that are saved in the volatile memory RAM of the device Resets the port monitor function for the selected interface and enables the port when disabled by the Port Monitor function Opens the online help 8 3 7 Port Monitor Link Flap Link Flapping occurs when a link alternately advertises its link state as up and down You configure the device to detect this condition and then define whether to send a trap or shut the port off 254 RM GUI RSPL Release 2 0 02 2013 Diagnostics 8 3 Ports Table Parameters Meaning Port Shows the number of the device port to which the table entry relates Sampling Defines the interval in seconds for link flap detection for this entry Interval s Possible values 1 180 default setting 10 Link Flap Count Defines the link flap detection count
267. t are set up The table shows the ports to which the device distributes the data packets for the corresponding VLAN and how the port handles the tagging of the data packets You can make changes to the entries in the Switching VLAN Static dialog The device transmits the data packets in the corresponding VLAN if the vLAN Unaware Mode function is deactivated in the Switching Global dialog Table Parameters Meaning VLAN ID ID of the VLAN Status Shows how the VLAN is set up Possible values other Only for VLAN 1 permanent Manually set up VLAN If the device is reset the configuration of this VLAN remains in the device Table 158 Table in the switching VLAN Current dialog RM GUI RSPL Release 2 0 02 2013 177 Switching 5 5 VLAN Parameters Meaning Creation Time Shows the time stamp for the operating time system uptime The VLAN has been set up in the device since this time Possible values day s hh mm ss Port Shows on which ports the device transmits the data packets for the corresponding VLANs and how it handles the VLAN tagging Possible values The port does not transmit any data packets for the VLAN The port is not a member of the VLAN T The port transmits data packets with a VLAN tag tagged U The port transmits data packets without a VLAN tag untagged Table 158 Table in the Switching VLAN Current dialog cont Buttons Button Meaning Reload Updates the fields with the val
268. te table Parameters Meaning Power Supply Shows the number of the power supply to which the table entry relates Propagate State Defines whether the signal contact monitors the power supply Possible values Selected default setting The signal contact opens if one of the following conditions applies The voltage source is providing an incorrect voltage The voltage source fails The power supply within the device is defective Not selected The signal contact remains closed under the conditions named above Table 268 Propagate State table in the Diagnostics Status Configuration Signal Contact dialog Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 269 Buttons RM GUI RSPL Release 2 0 02 2013 279 Diagnostics 8 4 Status Configuration 8 4 4 MAC Notification MAC notification also known as MAC address change notification tracks users on a network by storing the MAC address change activity When the switch learns or removes a MAC address the device sends an SNMP trap to a configured trap destination The device generates MAC address change notifications for dynamic unicast MAC addresses The intended use of this function i
269. ted HTTP connection and enables access to the management functions The device supports up to 10 simultaneous connections via HTTP or HTTPS A digital certificate is required for the encryption of the HTTP connection The device allows you to create this certificate yourself or to load an existing certificate onto the device Operation Parameters Meaning Operation When the function is switched on the device supplies the graphical user interface GUI via an encrypted HTTP connection Possible values Off Server is deactivated The management functions of the device can only be accessed via the Command Line Interface CLI On default setting Server is activated You can access the management functions of the device via HTTPS The device can then only be started if there is a certificate on the device Table 53 Operation frame in the Securi ty Management Access Server dialog HTTPS tab page Note When you switch off the server the connection between the graphical user interface GUI and the device is interrupted To continue working with the graphical user interface switch the server on again via the Command Line Interface CLI RM GUI RSPL Release 2 0 02 2013 79 Security 2 3 Management Access Configuration Parameters Meaning Listen TCP Port Defines the number of the TCP port on which the server receives requests from clients Possible values 1 65535 default setting 443 Exception Port 2222 is reserve
270. ters Meaning Flow Control Activates deactivates the flow control on the device port Possible values Not selected Flow control on the device port is deactivated Selected default setting The sending and evaluating of pause data packets full duplex operation or collisions half duplex operation is activated on the port L To switch on the flow control in the device also switch on the Activate Flow Control function in the switching Global dialog O Additionally activate the flow control on the port of the device connected with this port On an uplink port activating the flow control can possibly cause undesired sending breaks in the higher level network segment wandering backpressure When you are using a redundancy function you deactivate the flow control on the participating device ports If the flow control and the redundancy function are active at the same time there is a risk that the redundancy function will not operate as intended Table 32 Table in the Basic Settings Port Configuration dialog section x3c tblsheetnum gt of 4 Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 33 Buttons RM GUI RSPL 56 Release
271. th this distribution is covered by the same copyright terms except that the holder is Tim Hudson t h cryptsoft com Copyright remains Eric Young s and as such any Copyright notices in the code are not to be removed If this package is used in a product Eric Young should be given attribution as the author of the parts of the library used This can be in the form of a textual message at program startup or in documentation online or textual provided with the package RM GUI RSPL Release 2 0 02 2013 323 Appendix A 8 Copyright of Integrated Software Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the following acknowledgement This product includes cryptographic software written by Eric Young eay cryptsoft com The word cryptographic can be left out if the rouines from the library being used are not cryptographic related 4 If you include any Windows specific code o
272. that are members of the same VLAN as the device management You can see which VLAN a device port is assigned to in the Switching VLAN Current dialog RM GUI RSPL Release 2 0 02 2013 27 Basic Settings 1 2 Network BOOTP DHCP Parameters Client ID Meaning Shows the DHCP client ID that the device sends to the BOOTP or DHCP server If the server is configured accordingly it reserves an IP address for this DHCP client ID Therefore the device receives the same IP from the server every time it requests it The DHCP client ID that the device sends is the device name defined in the Name field in the Basic Settings System dialog Table 10 BOOTP DHCP frame in the Basic Settings Network Global dialog IP Parameter This frame allows you to assign the IP parameters manually These fields can be edited if you have selected the Local option in the IP Address Assignment field in the Management Interface frame Parameters IP Address Netmask Gateway Address Meaning Defines the IP address under which the device management can be accessed via the network Possible values Valid IPv4 address Default setting Defines the netmask The netmask identifies the network prefix and the host address of the device in the IP address Possible values Valid IPv4 netmask Default setting Defines the IP address of a router via which the device accesses other devices outside its own network Possible values Valid IPv4
273. the device based on the destination MAC address Each row in the table represents one filter The device automatically sets up the filters The device allows you to set up additional filters manually The device transmits the data packets as follows If the table contains an entry for the destination address of a data packet the device transmits the data packet from the receiving port to the port specified in the table entry If there is no table entry for the destination address the device transmits the data packet from the receiving port to all the other ports Table Parameters Address Status Meaning Shows the destination MAC address to which the table entry applies Shows how the device has set up the address filter Possible values learned Address filter set up automatically by the device based on received data packets permanent Address filter set up manually The address filter stays set up permanently igmp Address filter automatically set up by IGMP Snooping mgmt MAC address of the device The address filter is protected against changes invalid Deletes a manually set up address filter Table 134 Table in the Switching Filters for MAC Addresses dialog 156 RM GUI RSPL Release 2 0 02 2013 Switching 5 3 Filter for MAC addresses Parameters Meaning VLAN ID Shows the ID of the VLAN to which the table entry applies Possible values 1 4042 The device learns the MAC addresses for every VLAN s
274. the key from the device click Set Until you restart the server the existing connections remain in place However the device prevents new connections from being set up Table 61 Signature frame in the Security Management Access Server dialog SSH tab page 84 RM GUI RSPL Release 2 0 02 2013 Security 2 3 Management Access Key Import Parameters URL Import Meaning Defines the path and file name of your own DSA RSA key host key The device accepts the DSA RSA key if it has the following key length 2048 bit RSA 1024 bit DSA The device gives you the following options for copying the key to the device File upload If the key is on your PC or on a network drive click and select the file that contains the key host key TFTP upload If the key is ona TFTP server enter the URL for the file in the following form tftp lt IP address gt lt path gt lt file name gt SCP or SFTP upload If the key is on an SCP or SFTP server you enter the URL for the file in the following form scp orsftp lt IP address gt lt path gt lt file name gt When you click Import the device displays the Authentication window There you enter the User and Password to login to the server scp orsftp lt user gt lt password gt lt IP address gt lt path gt lt file name gt Shows the Open dialog Here you select the key to be copied if the file is located on your PC or on a ne
275. the management functions of the device The dialog contains the following tabs Server SNMP Server Telnet Server HTTP Server HTTPS Server SSH RM GUI RSPL 72 Release 2 0 02 2013 Security 2 3 Management Access 2 3 2 Server SNMP This tab allows you to define settings for the SNMP server of the device and to switch on off the access to the device with different SNMP versions The SNMP server enables access to the management functions of the device with SNMP based applications e g with the graphical user interface Configuration Parameters SNMP v1 enabled SNMP v2 enabled SNMP v3 enabled Meaning Activates deactivates the access to the device with SNMP version 1 Possible values Selected default setting Access activated Not selected Access deactivated You define the community name in the Security Management Access SNMPv1 v2 Community dialog Activates deactivates the access to the device with SNMP version 2 Possible values Selected default setting Access activated Not selected Access deactivated You define the community name in the Security Management Access SNMPv1 v2 Community dialog Activates deactivates the access to the device with SNMP version 3 Possible values Selected default setting Access activated Not selected Access deactivated This function is used for example by the Industrial HiVision network management software to make changes to the settings Table 45
276. the rate limiter function to specific data packets e g to Broadcasts Multicasts and Unicasts with an unknown destination address Excluding Unicasts with a known destination address from this restriction Using the egress limiter function instead of the ingress limiter function The egress limiter function works somewhat better with the TCP flow control due to the device internal buffering of the data packets Increasing the aging time for learned Unicast addresses The dialog contains the following tabs Ingress Egress Ingress On this tab you activate the rate limiter function for received data packets By entering a threshold value you define the maximum amount of traffic the port transmits on the ingress side If the traffic on this port exceeds the threshold value the device discards the excess traffic on this port Parameters Meaning Port Shows the number of the device port to which the table entry relates Table 131 Table in the Ingress tab of the switching Rate Limiter dialog RM GUI RSPL Release 2 0 02 2013 153 Switching Parameters Threshold Threshold Unit Broadcast Mode Multicast Mode Unknown Unicast Mode 5 2 Rate Limiter Meaning Defines the threshold value for Broadcast Multicast and Unicast traffic on this port Possible values 0 24414 at 100 MBit s 0 244140 at 1000 MBit s default setting 0 The value 0 deactivates the rate limiter function on this port O Enter a percentage between 0
277. thout modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE RM GUI RSPL Release 2 0 02 2013 325 Appendix A 8 Copyright of Integrated Software RM GUI RSPL 326 Release 2 0 02 2013
278. ticating the users to this authentication server If you select multiple servers the device specifies the last server selected as the primary authentication server Not selected default setting The server is specified as the secondary authentication server The device sends the login data to the secondary authentication server if it does not receive a response from the primary authentication server Activates deactivates the connection to the server Possible values Selected The connection is active The device sends the login data for authenticating the users to this server if the preconditions named above are fulfilled Not selected The connection is inactive The device does not send any login data to this server Table 99 Table in the Security RADIUS Authentication Server dialog cont RM GUI RSPL Release 2 0 02 2013 119 Security 2 6 RADIUS Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Create Adds a new table entry Remove Removes the selected table entry Help Opens the online help Table 100 Buttons 2 6 3 Accounting Server This dialog allows you to define up to 8 accounting servers An accounting server records the traffic data that has occurred dur
279. timeout in minutes After the device has been inactive for this time it ends the session for the user logged on Possible values 0 160 default setting 5 The value 0 deactivates the function The user remains logged on when inactive Table 48 Configuration frame in the Security Management Access Server dialog Telnet tab page section x3c tblsheetnum gt of 2 Buttons Button Set Reload Help Table 49 Buttons 76 Meaning Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Updates the fields with the values that are saved in the volatile memory RAM of the device Opens the online help RM GUI RSPL Release 2 0 02 2013 Security 2 3 Management Access 2 3 4 Server HTTP This tab allows you to define settings for the HTTP server of the device and to switch the server on off The HTTP server provides the graphical user interface GUI via an HTTP connection The graphical user interface communicates with the device based on SNMP and enables access to the management functions The device supports up to 10 simultaneous connections via HTTP or HTTPS Operation Parameters Meaning Operation When the function is switched on the device supplies the graphical user interface GUI via an HTTP connection Possible values OFE Server is deactivated On default setting Server is a
280. topology this information is identical to the information of the designated port role If a device port has no connection or if it has not received any STP BDPUs yet the device displays the values that the device port would send with the designated role Admin Edge Port Specifies whether a terminal device is connected to the device port Possible values Not selected default setting An STP bridge is connected to the device port After the connection is set up the device port switches to the learning state before switching to the forwarding State if applicable Selected A terminal device is connected to the device port After the connection is set up the device port switches to the forwarding state without switching to the learning state beforehand Ifthe device port receives an STP BPDU the device deactivates the port if the BPDU Guard function is switched on in the Redundancy Spanning Tree Global dialog Table 190 CIST tab page in the Redundancy Spanning Tree Port dialog section x3c tblsheetnum gt of 4 RM GUI RSPL Release 2 0 02 2013 213 Redundancy Parameters Auto Edge Port Oper Edge Port Oper PointToPoint 7 2 Spanning Tree Meaning Activates deactivates the automatic detection of whether a terminal device is connected to the device port This setting is only effective if the device checkbox in the Admin Edge Port column is not selected Possible values Selected default setti
281. trator in port analysis It eliminates the possibility that this port causes other ports on the module or the entire module to shut down Configuration Parameters Meaning Link Flap Defines whether the device enables a port after a Link Flap condition produces a disable port action Possible values Selected Enables the ports after the user defined time elapses Not selected default setting The ports remain disabled CRC Error Defines whether the device enables a port after a CRC Fragments condition produces a disable port action Possible values Selected Enables the ports after the user defined time elapses Not selected default setting The ports remain disabled Table 244 Configuration frame in the Diagnostics Ports Auto Disable dialog RM GUI RSPL 258 Release 2 0 02 2013 Diagnostics Parameters Duplex Mismatch DHCP Snooping ARP Rate 8 3 Ports Meaning Defines whether the device enables a port after a Duplex Mismatch condition produces a disable port action Possible values Selected Enables the ports after the user defined time elapses Not selected default setting The ports remain disabled Defines whether the device enables a port after a DCHP Snooping condition produces a disable port action Possible values Selected Enables the ports after the user defined time elapses Not selected default setting The ports remain disabled Defines whether the device enables a port after an ARP
282. ttons Button Reload Help Table 23 Buttons RM GUI RSPL Release 2 0 02 2013 Meaning Updates the fields with the values that are saved in the volatile memory RAM of the device Opens the online help 37 Basic Settings 1 4 Load Save 1 4 Load Save This dialog allows you to save the settings permanently in a configuration profile When you click Set in a dialog while the device is operating the device only saves the changes temporarily The device allows you to keep multiple configuration profiles in the memory so that you can quickly switch to other settings if required Configuration profiles can be saved in encrypted or unencrypted form You also have the option to export configuration profiles toa PC or an SCP or FTP server or to copy them back to the device from there Unintentional changes to the settings may cause the connection between your PC and the device to be terminated To make sure the device remains accessible switch on the Undo Modifications of Configuration function before changing settings If the connection is then terminated the device loads the device configuration saved in the non volatile memory NVM External Memory Parameters Meaning Selected ENVM Shows the type of the external memory Possible values SD External SD memory ACA31 State Shows the operating state of the external memory Possible values notPresent No external memory connected removed Someone has removed
283. tus In this mode the signal contact signals the overall status from the Device Status dialog and from the Security Status dialog The Status frame shows the status Table 262 Signal Contact Mode frame in the Diagnostics Status Configuration Signal Contact dialog Trap Configuration Parameters Meaning Generate Trap Activates deactivates the sending of an SNMP message trap when an event occurs that triggers the signal contact Possible values Selected The device sends a trap Not selected default setting The device does not send a trap The prerequisite for sending SNMP messages traps is that the function is switched on in the Diagnostics Alarms Traps dialog and at least 1 SNMP manager is defined Table 263 Trap Configuration frame in the Diagnostics Status Configuration Signal Contact dialog RM GUI RSPL Release 2 0 02 2013 275 Diagnostics 8 4 Status Configuration Monitoring correct Operation In this frame you define the parameters that the device monitors The device signals the occurrence of an event by opening the signal contact Parameters Meaning Contact Shows the status of the signal contact Possible values Opened Error An event has occurred that triggers the signal contact The signal contact is opened Closed OK Normal status The signal contact is closed Temperature Defines whether the signal contact monitors the temperature in the device Possible values Ignore The
284. twork drive Copies the key host key defined in the File field to the device To get the server to use this key you click Set and restart the server Table 62 Key Import frame in the Security Management Access Server dialog SSH tab page Buttons Button Set Reload Help Meaning Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Updates the fields with the values that are saved in the volatile memory RAM of the device Opens the online help Table 63 Buttons RM GUI RSPL Release 2 0 02 2013 85 Security 2 3 Management Access 2 3 7 SNMPv1 v2 Community With this dialog you can define the community name for SNMPv1 v2 applications Applications send requests via SNMPv1 v2 with a community name in the SNMP data packet header Depending on the community name the application gets read authorization or read and write authorization for the device You activate the access to the device via SNMPv1 v2 in the Security Management Access Server dialog Table Parameters Meaning Community Shows the authorization for SNMPv1 v2 applications to the device Write For requests with the community name entered beside this the application gets read and write authorization for the device Read For requests with the community name entered here the application gets rea
285. ty Authentication List dialog Table Parameters Meaning User Name Shows the user name of the terminal device To create a new user you click Create Table 95 Table in the Security 802 1X Port Authentication Integrated Authentication Server dialog RM GUI RSPL 114 Release 2 0 02 2013 Security Parameters Password Active 2 5 802 1X Port Authentication Meaning Specifies the password with which the user authenticates himself Possible values 6 64 alphanumeric characters including the following special characters 1 amp lt gt M O The device differentiates between upper and lower case Activates deactivates the login data Possible values Selected The login data is active A terminal device has the option to login via 802 1x using this login data Not selected default setting The login data is inactive Table 95 Table in the Security 802 1X Port Authentication Integrated Authentication Server dialog cont Buttons Button Set Reload Create Remove Help Table 96 Buttons RM GUI RSPL Release 2 0 02 2013 Meaning Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Updates the fields with the values that are saved in the volatile memory RAM of the device Adds a new table entry Removes the selected table entry Opens the online hel
286. ty name 86 SNMP manager 282 SNMP messages traps 282 SNMP server 73 SNTP 134 SNTP client 134 SNTP server 139 Software update 35 Spanning Tree Protocol 204 SSH server 82 Starting the graphical user interface GUI 12 Static VLANs 179 Statistics table ports 246 Status line via menu 13 Switch dump zip archive 231 Syslog 238 System information HTML 220 System log 244 System monitor 223 System requirements GUI 11 Technical Questions 333 Telnet client 298 Telnet server 75 Temperature SFP module 248 Time 127 Time setting 128 130 Topology discovery 221 284 288 Training Courses 333 Traps SNMP messages 282 Trap configuration Device status 265 Trust mode 190 U Unaware mode VLAN 150 Updating device software 35 User management 60 User defined VLANs 179 Utilization thresholds 153 Utilization ports 247 RM GUI RSPL Release 2 0 02 2013 Index Virtual Local Area Network VLAN VLANs dynamic VLANs set up VLANs static VLAN ports VLAN settings VLAN unaware mode VLAN management Volatile memory RAM WwW Watchdog Z Zip archive system information RM GUI RSPL Release 2 0 02 2013 329 Readers Comments C Readers Comments What is your opinion of this manual We are constantly striving to provide as comprehensive a description of our product as possible as well as important information to assist you in the operation of this product Your comments and suggestions help us to further impro
287. ues that are saved in the volatile memory RAM of the device Help Opens the online help Table 159 Buttons RM GUI RSPL 178 Release 2 0 02 2013 Switching 5 5 VLAN 5 5 3 Static This dialog allows you to set up and manage VLANs For each VLAN you specify to which ports the sending of a data packet is allowed and whether the port sends the data packet with or without a VLAN tag This dialog allows you to create and manage VLANs In the table you assign the VLANs that are set up to the device ports In the process you define whether a port transmits data packets in the corresponding VLAN and how the port handles the VLAN tagging The device transmits the data packets in the corresponding VLAN if the vLAN Unaware Mode function is deactivated in the Switching Global dialog Note The VLAN settings are only effective if the VLAN Unaware Mode is switched off see the Switching Global dialog Table Parameters Meaning VLAN ID ID of the VLAN The device supports up to 128 VLANs set up simultaneously Possible values 1 4042 Name Name of the VLAN The device automatically specifies the name You can change the name at any time Possible values 1 32 alphanumeric characters state on delivery default for VLAN 1 otherwise VLANxxxx Table 160 Table in the switching VLAN Static dialog RM GUI RSPL Release 2 0 02 2013 179 Switching Parameters Port 5 5 VLAN Meaning Defines on which ports the device tra
288. uirements To open the graphical user interface you need a Web browser for example Mozilla Firefox version 3 5 or later or Microsoft Internet Explorer version 6 or later Installation Note The graphical user interface uses Java 6 or Java 7 Install the software from the enclosed CD ROM To do this you go to Additional Software select Java Runtime Environment and click on Installation RM GUI RSPL Release 2 0 02 2013 11 Graphical User Interface E Starting the graphical user interface The prerequisite for starting the graphical user interface first configure the IP parameters of the device correctly The Basic Configuration user manual contains detailed information that you need to define the IP parameters C Start your Web browser O Activate Java in the security settings of your Web browser C Write the IP address of the device in the address field of the Web browser Use the following form https XXX XXX XXX XXX The Web browser sets up the connection to the device and shows the login window Rh HIRSCHMANN Rail Switch Power Lite Software Version HiOS 25 02 0 00 Login user hd Password a Language Engish fi Figure 1 Login window C Select the user name and enter the password C Select the language in which you want to use the graphical user interface L Click on OK The window with the graphical user interface will appear on the screen RM GUI RSPL 12 Release 2 0 0
289. uration Security Status dialog section x3c tblsheetnum gt of 4 Monitor active Port without link table Parameters Port Monitor active Port without link Meaning Shows the number of the device port to which the table entry relates Defines whether the device monitors the link status of an enabled port Possible values Selected The device changes the security status to Error if the port is switched on dialog Basic Settings Port Configuration checkbox Port on is selected and the link is down on the port Not selected default setting The security status remains unchanged if someone sets up a connection via the port This setting only takes effect if you have selected the value Monitor in the Monitoring frame in the Active Port without link field Table 260 Monitor active Port without link table in the Diagnostics Status Configuration Security Status dialog RM GUI RSPL Release 2 0 02 2013 273 Diagnostics Buttons Button Set Reload Help Table 261 Buttons 8 4 Status Configuration Meaning Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Updates the fields with the values that are saved in the volatile memory RAM of the device Opens the online help 8 4 3 Signal Contact The signal contact is a potential free relay contact The device thus allows you t
290. using this is legal or not in your country and am not taking any responsibility on your behalf NO WARRANTY BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU SHOULD THE PROGRAM PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION INNO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES RM GUI RSPL Release 2 0 02 2013 313 Appendix A 8 Copyright of Integrated Software 2 The 32 bit CRC compensation attack detector in deattack c was
291. values urgent non urgent Defines the destination email address for the email alert Possible values Valid e mail address 0 255 alphanumeric characters Activates deactivates the transmission of email alerts for the entry Possible values Selected The device sends an email alert to the user defined email address Not selected default setting Table 215 Table in the Diagnostics Report Email Logging Addresses dialog RM GUI RSPL Release 2 0 02 2013 237 Diagnostics 8 2 Report 8 2 4 Syslog The device enables you to send specific logged events to one or more syslog servers In this dialog you define the settings for this The dialog manages a list of up to 8 syslog server entries Depending on the severity of the event the device sends the log entry to different syslog servers Operation Parameters Meaning Operation When the function is switched on the device sends the events specified in the table to the specified syslog servers Possible values On off default setting Table 216 Operation frame in the Diagnostics Report Syslog dialog Table Parameters Meaning Index Shows a sequential number to which the table entry relates The device automatically defines this number When you delete a table entry this leaves a gap in the numbering When you create a new table entry the device fills the first gap Possible values sO IP Address Defines the IP address of the syslog server Possible values Valid
292. ve the quality of our documentation Your assessment of this manual Very Good Satisfactory Mediocre Poor Good Precise description O O O O O Readability O O O O O Understandability O O O O O Examples O O O O O Structure O O O O O Comprehensive O O O O O Graphics O O O O O Drawings O O O O O Tables O O O O O Did you discover any errors in this manual If so on what page RM GUI RSPL 330 Release 2 0 02 2013 Readers Comments Suggestions for improvement and additional information General comments Sender Company Department Name Telephone number Street Zip code City E mail Date Signature Dear User Please fill out and return this page as a fax to the number 49 0 7127 14 1600 or per mail to Hirschmann Automation and Control GmbH Department 01RD NT Stuttgarter Str 45 51 72654 Neckartenzlingen RM GUI RSPL Release 2 0 02 2013 331 Readers Comments RM GUI RSPL 332 Release 2 0 02 2013 Further Support D Further Support Technical Questions For technical questions please contact any Hirschmann dealer in your area or Hirschmann directly You will find the addresses of our partners on the Internet at http www hirschmann com Contact our support at https hirschmann support belden eu com You can contact us in the EMEA region at Tel 49 0 1805 14 1538 E mail hac support belden com in the America region at Tel 1 717 217 2270 E mail inet support us
293. witching VLAN Static and Switching VLAN Port dialogs All the device ports are assigned to VLAN 1 The device evaluates the priority information contained in the data packet Note You specify the VLAN ID 1 for all the functions in the device that use VLAN settings Among other things this applies to static filters MRP and IGMP Snooping Table 129 Configuration frame in the switching Globa1 dialog cont Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 130 Buttons RM GUI RSPL 152 Release 2 0 02 2013 Switching 5 2 Rate Limiter 5 2 Rate Limiter The device allows you to limit the traffic on the ports in order to ensure reliable operation even with a large traffic volume If the traffic on a port exceeds the traffic value entered the device discards the excess traffic on this port The rate limiter function operates exclusively on layer 2 and is used to limit the effects of storms of data packets that flood the device typically Broadcasts The rate limiter function ignores protocol information on higher levels such as IP or TCP With the following measures you reduce the effects on for example the TCP traffic Restricting
294. work Management Protocol SNMPv3 View based Access Control Model VACM for the Simple Network Management Protocol SNMP Management Information Base MIB for the Simple Network Management Protocol SNMP 802 1X RADIUS Usage Guidelines Coexistence between Version 1 Version 2 and Version 3 of the Internet standard Network Management Framework Management Information Base for the Transmission Control Protocol TCP Management Information Base for the User Datagram Protocol UDP Definitions of Managed Objects for Bridges SSH protocol architecture SSH authentication protocol SSH transport layer protocol SSH connection protocol Management Information Base for the Internet Protocol IP Definitions of Managed Objects for Bridges with Rapid Spanning Tree Protocol Simple Network Time Protocol SNTP Version 4 for IPv4 IPv6 and OSI Definitions of Managed Objects for Bridges with Traffic Classes Multicast Filtering and Virtual LAN Extensions Considerations for Internet Group Management Protocol IGMP and Multicast Listener Discovery MLD Snooping Switches Definitions of Managed Objects for IEEE 802 3 Medium Attachment Units MAUs RM GUI RSPL Release 2 0 02 2013 Appendix A 3 Underlying IEEE Standards A 3 Underlying IEEE Standards IEEE 802 1AB IEEE 802 1D 2004 IEEE 802 1Q 2005 IEEE 802 1Q 2005 IEEE 802 1X IEEE 802 3 2002 IEEE 802 3ac IEEE 802 3x RM GUI RSPL Release 2 0 02 2013 Topology Discovery LLDP
295. ws the number of EAP response identity data packets that the device received on the port Shows the number of valid EAP response data packets that the device received on the port without EAP response identity data packets Shows the number of EAP request identity data packets that the device received on the port Shows the number of valid EAP request data packets that the device received on the port without EAP request identity data packets Shows the number of EAPOL data packets with an unknown frame type that the device received on the port Shows the number of EAPOL data packets with an invalid packet body length field that the device received on the port Shows the protocol version number of the EAPOL data packet that the device last received on the port Shows the sender MAC address of the EAPOL data packet that the device last received on the port The value 00 00 00 00 00 00 means that the port has not received any EAPOL data packets yet Table 90 Table in the Security 802 1X Port Authentication Statistics dialog RM GUI RSPL Release 2 0 02 2013 111 Security 2 5 802 1X Port Authentication Buttons Button Meaning Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 91 Buttons 2 5 5 Port Authentication History The device logs the authentication process of the terminal devices that are connected to its ports This dialog shows the
296. zed The SNTP server is not synchronized with either a local or an external reference clock syncToLocal The SNTP server is synchronized with the hardware clock of the device syncToRefclock The SNTP server is synchronized with an external reference clock e g PTP yncToRemoteSserver The SNTP server is synchronized with an SNTP server that is higher than the device in a cascade Table 123 State frame in the Time SNTP Client dialog Buttons Button Meaning Set Transfers the changes to the volatile memory RAM of the device To permanently save the changes afterwards you open the Basic Settings Load Save dialog and click Save Reload Updates the fields with the values that are saved in the volatile memory RAM of the device Help Opens the online help Table 124 Buttons RM GUI RSPL Release 2 0 02 2013 141 Time 3 2 SNTP RM GUI RSPL 142 Release 2 0 02 2013 Network Security 4 Network Security The device has comprehensive configuration options to help protect individual devices and complex networks against undesired or even dangerous network traffic The device can perform the following with data packets Accept The device forwards the data packet to its destination Reject The device discards the data packet and informs the sender Drop The device discards the data packet without informing the sender The network security area also provides protection against invalid or fake data traffic that a

Download Pdf Manuals

Related Search

Related Contents

Bibliographie sur le montage  "取扱説明書"  CableUPS® Inteligente  le kiosque des mois d`Avril et mai 2015  

Copyright © All rights reserved. Failed to retrieve file