Bluetooth Headset for Voice Chat Charging Basic
Contents
1. High Definition Audio F A ES d High Definition Audio F A Ready Ready AUROUAOIN set Default M Properties o cane if it changes to Default Device the setting is complete Configure Set Defauit v Properties Configure Double click the Bluetooth Audio icon For the microphone setting select the Recording tab and perform the cording device below to modify its settings Select a re FA same procedure Bluetooth Audio Inp Device LBT HP06 Mono Auc aig Default Device i E No voice heard during phone conversation With some mobile phones if there is a silence during conversation that is longer than approx 20 seconds the phone will automatically go into power saving mode and the earphone jack will turn off sound input output Because of this sound may sometimes turn off during conversation If this occurs press the multi function button on this product to take the phone out of power saving mode i This product does not have any power Always ensure that the battery for this product is fully charged If the battery is not fully charged charge it When you no longer need to use this product and the battery be sure to dispose of it in accordance with the local ordinances and laws of your area E Line noise or echoes can be heard Try adjusting the distance between this product a2. o Select Add a Device Add a Device Allow a Device to Connect Show Bluetooth Devices Send a File Receive a File z Join a Personal Area Network Customize Open Settings Remove Icon Jap ee 2012 02 19 yi x r So Add a device Ww Tf Adda device Select a device to add to this computer This device has been successfully added to this computer Windows will continue to look for new devices and display them here Windows is now checking for drivers and will installthem necessary You may need to wait for this to finish before your device ady to use ELECOM TK FBS035 series Pee oe 5 p 7 Bluetooth To verify if this device finished installing properly look for it in a gt ceiboadd Devices and Prir Bluetooth LBT VMO1 Configuring Bluetooth Services What if Windows doesn t find my device J cance SSS If the connection is ae Bluetooth Device Control In Bluetooth Device Control successfully completed LS i di wy _ A y the window on the right is displayed USERNAME PC LBT VM01 This computer Connected Q Headset Operations Q Music and Audio i 5 i This completes the pairing Disconnect from the Bluetooth LBT VM01 headset m recognition for LBT VM01 headset You can cancel the connection by clicking Show Bluetooth devices Open Bluetooth set
3. or disassemble this product yourself Doing so may cause electric shock fire or burns Do not damage the cord used for connection Doing so may cause fire or disconnection Do not use the product in hospitals or in aircraft Under no circumstances use this product in locations where the highest levels of safety are demanded This product may cause malfunctions in specialised medical facilities and aircraft instruments Caution When using this product outdoors pay full attention of the safety of your surroundings OY If the items listed here are ignored it may cause injury or property damage Do not use or leave in areas that contain a large amount of moisture If liquid enters the inside of this product it may cause breakdown fire or electric shock Do not leave in areas that are reachable by small children This may lead to an unexpected incident where this product is accidentally ingested As the main unit is a precision electronic device avoid using or storing it in areas where impact or vibration will occur in areas where strong magnetism is produced or in areas where static electricity is produced Do not use this product if it creates radio wave interference with in car devices Depending on the model of car that is used radio wave interference may occur between this product and in car devices When something like this occurs cease use of this product When the product is
4. Defau timedia Device Network and Internet AutoPla Digital Audio S PDIF e Hardware and Sound E y g High Definition Audio 4 Change default settings for media or devices Read Programs Play CDs or other media automatically User Accounts and Family Safety J Sound z Appearance and 4 Adjust system volume hange system sounds Personalization Power Options Clock Language and Region Change power saving settings Change what the power buttons do Ease of Access Require a password when the computer wakes Change when the computer sleeps Choose a power plan l5 Display a as Make text and other items larger or smaller Adjust screen resolution Configure Set Default Properties Connect to an external display How to correct monitor flicker refresh rate The correct state is when the Bluetooth Audio setting on the Playback tab is Default Device Click Manage audio devices on the control panel Procedure to change le Sound Sound S Playback Recording Sounds Communications Playback Recording Sounds Communications Select a playback device below to modify its settings Select a playback device below to modify its settings Digital Audio HDMI Digital Audio HDMI n 7 2 High Definition Audio 7J 4A 2 High Definition Audio T A a Default Device S Default Multimedia Device Digital Audio S PDIF Digital Audio S PDIF
5. charging do not place objects around it or the USB charging cable Doing so may generate heat and cause fire or burns When using the product follow the instructions in the user s manual for the connected device This product can be used with PCs and mobile phones via wireless communications but the configuration procedures and precautions differ according to the connected device When using the product carefully read the user s manuals for these products and follow their precautions Periodically charge the product When not using this product for extended periods of time charge it about once a month i Discarding the product This product uses a lithium polymer battery for its internal battery The lithium polymer battery is a recyclable resource When you no longer need to use this product and the battery be sure to dispose of it in accordance with the local ordinances and laws of your area Wi Other Please also pay attention to the following items e Avoid using or storing this product in locations exposed to vibrations or impacts in high temperature or humid areas or in areas that are exposed to direct sunlight for long periods of time e This product is a precision device Do not drop it or expose it to strong impacts e Do not place this product in locations with high temperatures and high humidity vehicle dashboards near heaters etc in locations exposed to direct sunlight for long periods of time in locat
6. 5 seconds until the LED lamp turns blue to turn on the power and attempt to connect to the device that was previously connected The LED lamp will flash slowly once every few seconds for one second when the connection is complete If no device was previ ously connected it waits for a connection from another paired device The power turns off after about 10 minutes if there is no connection op eration from a device Pairing mode In the power off state press and hold approx 8 seconds or more until the LED lamp alternately flashes red and blue then release Power OFF When the power is on press and hold approx 4 seconds or more until the LED lamp flashes red to turn the power off LED lamp The LED lamp that indicates the power and pairing state For the LED indications and product states read the description for the multi function button Charging connector Insert the included USB charging cable when charging the head set The connector is protected with a cover Volume switch Move the switch left and right to adjust the volume Press and hold the multi function button while the product is in the power off state When the LED lamp alternately flashes red and blue 8 seconds or more release the button For the 8 seconds while the button is pressed the LED indicator changes as shown next Blue Flashing red and blue power on pairing mode Click the Bluetooth icon on the taskbar of the PC
7. ELECOM Supports Bluetooth 2 1 EDR Bluetooth Headset for Voice Chat LBT PCVM01 Series User s Manual V01 A Thank you for purchasing this quality ELECOM product This user s manual describes how to use this Bluetooth headset and precautions for using the headset safely Ensure that you have read this manual before using the product After reading this manual store it somewhere safe for future reference Product features This product is a Bluetooth headset optimised for voice chat over Skype Windows Live Messenger and other applications This headset makes it possible to voice chat without bothersome cables over a wireless connection with Bluetooth This product supports Bluetooth 2 1 so it can be safely and easily paired with devices that meet the same standard reading this manual store it somewhere safe for future reference Makes comfortable voice chatting with clear audio possible from the 28 mm diameter large headphone unit and the microphone that extends to your mouth Equipped with a large capacity lithium polymer battery achieves approximately 11 hours of continuous talk time with a single charge 2 hours and over 150 hours of standby time Can be used together with a Bluetooth compatible mobile phone Necessary information when connecting E Product device name when detected LBT VM01 0000 Four zeros Link Key entry is required when connecting to devices using Bluetooth 2 0 or earlier in a search from a
8. ame for this product For Android After the call press the Menu button and press the Bluetooth button E Redialling Most recent number When paired with the HFP hands free profile press the multi function button twice and the phone can redial the last called number You cannot call back the party that previously called you such as a missed call Basic Specifications LBT PCVMO01 Series Device name LBT VMO1 2 402 2 480 GHz Bluetooth Ver 2 1 EDR FHSS Frequency Hopping Spread Spectrum Article No Carrier Signal Bluetooth Specifications Frequency diffusion method Transmit range Class 2 Max radius 10 m if unobstructed 1 HSP Headset Profile HFP Heads free Profile Calling device x 1 Supported Profiles Number of simultaneous devices Max no of pairing devices 8 Continuous standby time Approx 150 hours 2 Conversation time Approx 11 hours 2 Environment When Temperature 5 35 C iti ti sonaton PERETI Relative humidity 20 80 no condensation When Temperature 5 50 C tori aot Relative humidity 20 80 no condensation 5 VDC charged from USB power Lithium polymer battery Input voltage Battery type External dimensions W x H x D Weight 109 x 168 x 51 mm Excl protrusions Approx 47 g 1 Theoretical value Transmit range is also affected by the Bluetooth capability of the target device and the conditions of the surrounding en
9. atically turn off While the power is on the LED lamp slowly flashes blue Talking on a mobile phone This product can be combined with a mobile phone and used as a headset The features described below can only be used when paired with the headset profile HSP and the hands free profile HFP The behaviour of the mobile phone for the headset operations explained below may differ depending on the specifications of the mobile phone Pairing with a mobile phone After switching the product to pairing mode search for the product on the mobile phone The device name LBI VM01 will appear on the search screen so select it and register it To use this product with a mobile phone we recommend you pair the product with the hands free profile HFP so the mobile phone s functions can be used on the product When there is no hands free profile pair the product with the headset profile HSP E Receiving a call Press the multi function button when you hear the incoming call sound from the headphone Depending on the mobile phone you may not be able to configure a ring tone for the Bluetooth headset This is related to its specification E Hanging up the call While a call is connected press the multi function button once to hang up the call E Calling After placing a call on the mobile phone switch to the product Basic operation For iPhone4 After the call change the sound output setting to LBT VMO1 the device n
10. bient temperature malfunction may occur as a result of internal condensation Never leave this product inside a car If this product is left for a long period of time inside a car under high temperatures there is considerable risk that this will result in rupture of the internal battery fire or breakdown Do not use a charging device other than the included charging device This product uses a lithium polymer battery for its internal power supply There is a risk of fire if this battery is mishandled Only use the included USB charging cable to charge the product If you use a different cable there is a risk of fire or malfunction Under no circumstances use a different cable When finished charging always unplug the charging cable If the product is not finished charging even when the specified charging time has ended stop charging the product and unplug the charging cable If the product is charged for a length of time that exceeds the specified charging time there is a risk of the internal battery generating heat catching fire or bursting This may also affect the lifespan of the battery Exercise caution when setting the ringtone volume When using this product after pairing it with a mobile phone the sound of the ringtone may surprise you and cause an accident affecting your heart Do not disassemble Not including operations that are performed in accordance with the directions of this document do not repair modify
11. d Bluetooth logo are all trademarks that are owned by the Bluetooth SIG and licensed out for use to ELECOM Co Ltd that are incorporating Bluetooth wireless technology into their products Company names product names and other names in this manual are generally trademarks or registered trademarks Bluetooth Headset for Voice Chat User s Manual LBT PCVM01Series 1st edition February 25 2012 ELECOM Co Ltd 2012 ELECOM Co Ltd All Rights Reserved
12. ions where static electricity easily occurs or in locations with large amounts of dust e When this product has become dirty wipe it with a soft cloth that contains a small amount of water or mild detergent Using benzene or thinner will cause deformation or discolouration li Precautions regarding radio waves The band of frequencies used by this device are used to operate local wireless base stations wireless stations that require a licence and designated low power wireless stations wireless stations that do not require a licence for the detection of moving objects on factory production lines in addition to microwave ovens and other industrial scientific medical devices Before using this device make sure that local wireless base station and designated low power wireless stations for the detection of moving objects are not being operated if this device has created radio wave interference for a local wireless base station for moving object detection quickly change the frequency that is used or stop using this product In other situations where some sort of problem has occurred such as when this device causes an incident where radio wave interference is produced for a designated low power wireless station for moving object detection contact the retailer from whom you purchased the product 2 4 GHz FHSS Frequency Hopping Spread Spectrum Used frequency band Modulation method Estimated interference distance Approx 10 m when the
13. mobile device or a PC E Link Key Package Contents The package for this product contains the following items Please confirm the package contents before using this product Headset 1 unit USB charging cable 1 User s Manual This document Important Notice The included USB charging cable is meant for use with this product ONLY Do not use this cable for any purpose other than charging this product Even if the connector shape is the same the pin assignment wiring may be different which is a cause of malfunction Similarly do not use the charging cable included with another product to charge this product Part Names E Overall headset How to wear Wear the headset by placing it over your head so that the headphone unit touches your ear Then adjust the position of the microphone GP charging OOOO Charge the headset by connecting it to the USB port on a PC with the included USB charging cable When the amount of remaining battery power drops the LED flashes red and a warning sound is emitted every 20 seconds If the LED lamp has not turned off after 2 hours disconnect the charging cable and stop charging Charging for more than 2 hours can shorten the battery life and may lead to device failure This product cannot be used while charging Q It takes about 2 hours to fully charge this product Charging connection PC z Gatos USB chargi
14. nd the paired device Also try adjusting the volume etc li When a call is received on the mobile phone even when the multi function button is pressed it does not answer the call With some mobiles phones it may be necessary to press the multi function button several times before the conversation will start If the phone will not answer after pressing the multi function button once try pressing it several times E Your conversation partner cannot hear your voice With some mobile phones it is necessary to manually set the microphone input settings to ON If the microphone input is turned OFF your conversation partner will not be able to hear your voice spoken from the headset microphone E The phone immediately goes to voice mail when an incoming call is received If the phone is set to go to voicemail after a short time the voicemail will kick in before the Call is forwarded to this product If this occurs set your phone to wait for a longer time before a call goes to voicemail service E Cannot perform pairing with a Bluetooth device O Please ensure that the device s Bluetooth functions can be used If pairing mode cuts off due to time out it is necessary to perform the settings again O Confirm that the device supports the profiles used by this product E No ring tone You may not be able to set a ring tone for the incoming call sound on the Bluetooth headset depending on the mobile phone model li The headset cannot be
15. ng cable connector Charging connector M s es a of Charge by connecting to the USB port on a PC Main unit On while charging The LED lamp turns off when charging is complete Connect the charging connector for the included USB charging cable to the charging connector on the product Connect the series A connector of the USB charging cable to the USB ports of your PC etc The LED lamp turns red and charging begins The LED lamp turns off when charging is complete G When using the product with a PC the product must be paired task to first register the device with the PC that is used The procedure for pairing using the ELECOM LBT UANO3 USB adapter is explained here For operations on the device that will be used read the user s manual for that device Screen appearance may change but the procedure is the same Pairing Registering with the device Headphone unit The part that is worn on the ear According to the application wear it on whichever ear makes it easier to use When wearing adjust the position so the unit touches the centre of your ear Headband Microphone The length can be adjusted The microphone for talking It can be rotated approx 300 degrees to adjust its position It can also be worn on the left ear Multi function button This button turns the power ON OFF as well as performs the functions listed below Power ON Press and hold approx
16. re are no obstructions Ability to change frequencies Uses all bands and it is possible to avoid bands for local wireless base stations or designated low power wireless stations W About the internal battery The battery is a consumable that deteriorates even under normal usage This wear is a property of the battery It is not faulty The internal battery is a fee based repair even within the warranty period if the product is stored for a long period of time without being used the battery s performance will decrease The performance will be restored after the battery is charged and discharged a number of times The standby time decreases in environments with a low ambient temperature The lithium polymer batteries are recyclable resources Troubleshooting E Cannot hear the PC sound cannot input audio from the microphone Bluetooth audio may not be configured as the default device on the PC Check the settings with the procedure below and change the settings r dl lolo je N sound E 0O gt Control Panel Hardware and Sound 2 s Search Control Panel p Playback Recording I e I Communications Select a playback device below to modify its settings Control Panel Hi F _ SS aa 7 Devices and Printers en ae L M Addadevice Adda printer Add a Bluetooth device Mouse ee en System and Security fe P 2 Hig nition Audio Device Manager
17. tings Turn gtr OF Disconnect Voice Chat The operating methods will differ according to the software used For details read the manual for the software used or for the operating system Q You may be required to switch select the speaker microphone depending on the voice chat software used Perform talk end operations on the PC Basic Operation Power ON OFF E Power ON Press and hold the multi function button until the LED lamp flashes approx 5 seconds The product attempts to connect with the previously connected device To change the device to connect to turn off the device that was previously used or disable its Bluetooth function until the connection is complete with the device you want to use You may need to approve or authenticate the headset connection device name LBT VMO01 or perform a connection procedure from the mobile device E Power OFF Press and hold the multi function button of this product for 4 seconds or more The LED lamp blinks blue and turns off indicating the power is now OFF the redial function may operate and make a call depending on the mobile phone O If you release the multi function button before the power is turned off About the auto power off function If there is no signal from a connected device such as when turning a mobile phone off or no paired devices are detected within approx 10 minutes after turning this product on this product will autom
18. used when placing a call When making a call from the mobile phone the speaker and microphone must be switched from the phone to the Bluetooth headset For the procedure read the user s manual for the mobile phone Basic operation For iPhone4 After the call change the sound output setting to LBT VMO1 the device name for this product For Android After the call press the Menu button and press the Bluetooth button W Pairing is required each time after using other mobile phones For au after the headset is used with other mobile phones even if it is paired you may need to pair the headset again ELECOM CO LTD URL http www elecom co jp global overseas elecom co jp BES Lis BA ARAAl si trie K 232 26s 06 OR SARE EPRAE04 5 fan 86 21 33680011 FAX 86 21 64271706 URL http www elecom china com ELECOM Korea Co Ltd 5F Suam Bldg 1358 17 Seocho2 dong Seocho gu Seoul 137 862 Korea TEL 1588 9514 02 3472 5533 URL www elecom co kr ELECOM Singapore Pte Ltd 33 UBI AVENUE 3 03 56 VERTEX SINGAPORE 408868 TEL 65 6347 7747 FAX 65 6753 1791 ELECOM India Pvt Ltd 408 Deepali Building 92 Nehru Place New Delhi 110 019 India TEL 011 40574543 e mail support elecom india com URL http www elecom india com ednet gmbh Oberliederbacher Weg 36 D 65843 Sulzbach Taunus Germany Telefon 49 6196 8838 0 Telefax 49 6196 8838 111 URL http Awww ednet gmbh de The Bluetooth word mark an
19. vironment 2 When there is a long distance between this unit and Bluetooth device the power consumption for each will increase resulting in shorter available time Due to interference it may sometimes not be possible to use in combination with a 2 4 GHz band wireless LAN IEEE802 11g b n It is not guaranteed that all Bluetooth devices will work with this product Handling precautions E For proper and safe use In order to use this product properly and safely the following important precautions must be observed Warnin If the items listed here are ignored there is risk of death or g injury for the operator or there is risk of property damage Do not operate while driving an automobile S Do not use the headset while driving an automobile Stop using the product while walking on train platforms at intersections and at construction sites and carefully check your surroundings If an abnormality is found When the product emits a strange smell or smoke stop using it immediately and turn it off If charging unplug it from the PC or USB power After doing this 45 I gt stop using this product and contact the retailer Do not leave under high temperatures p This product is a precision electronic device Avoid using or storing this product in dee HNA IN Y high temperature or humid areas or in areas that are exposed to direct sunlight for long periods of time Also when there are sudden changes in the am
Download Pdf Manuals
Related Search