40cm Misting Fan
Contents
1. GOLDAIR Operating Instructions 40cm Misting Fan Model GCMF100 General Care and Safety Guide Thank you for choosing this Goldair product This Goldair appliance has been designed and manufactured to high standards of engineering and with proper use and care as described in this leaflet will give you years of useful service Please read these instructions carefully and keep them for future reference 10 11 12 13 14 15 16 Use only the voltage specified on the rating plate of the appliance Keep all objects at least 1 Metre from the front sides and rear of the appliance This appliance is intended for household use only and not for commercial or industrial use Use this appliance only as described in this manual Any other use is not recommended by the manufacturer and may cause fire electric shock or injury The common cause of overheating is deposits of dust or fluff in the appliance Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills Always unplug appliance when not in use When the appliance has been unpacked check if for transport damage and ensure all parts have been delivered If parts are missing of the appliance has been damaged contact the CDB Customer Services Team If your appliance does not work or is not working properly contact the place of purchase Repair work on the appliance by unqualified persons can2. cause serious risk to the user Ensure hands are dry before handling the plug or the Fan Carry out regular checks of the supply cord to ensure no damage is evident Children should be supervised to ensure that they do not play with the appliance Ensure that the cord is fully extended not coiled while in use Avoid contact with the moving parts Keep hands hair clothing away from blade of the Fan during operation to reduce the risk of injury to person and or damage to the Fan Switch off and use handles provided when moving This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they are supervised or have been given instruction concerning the use of the Fan by a person responsible for their safety Never place appliance close to radiant heat source TECHNICAL SPECIFICATION Model Supply Wattage GCMF100 220 240VAC 50Hz 85W 17 18 19 20 21 22 23 24 25 26 27 28 29 Never operate in areas where petrol paint or other flammable liquids are used or stored Never use the appliance to dry clothes Never insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock fire or damage to the appliance Never use abrasive cleaning products on this appliance Clean with a damp cloth not wet rinsed in hot soapy w
3. electric power is power off When new there might be residue in the water tank mist plate The water in the water tank may be contaminated The plug and supply cord are damaged The blades are bent Incorrect installation Clean out the water tank and replace with clean water Pour out the water and check for cracks Refill the water tank A full tank of water will last approximately 8 hours Free the float and allow it to float freely Refill the water tank A full tank of water will last approximately 8 hours Plug in the power cord and turn on the electric power The smell should disappear after further use Clean out the water tank and refill with fresh water Find service agent ora suitable qualified person to change or service Don t play with the blades Use soft damp cloth then wipe with dry cloth Re install correctly in accordance with the manual Disconnect from electricity before re installing To receive warranty retain receipt as proof of purchase Refer to back of booklet SUPPORT AND TECHNICAL ADVICE Goldair New Zealand Monday Friday 8am 5pm Phone 64 0 9 917 4000 Phone 0800 232 633 info cdb co nz Goldair Australia Monday Friday 8am 5pm Phone 61 0 3 9336 4423 Phone 1300 465 324 info cdbgoldair com au CDB 4 GOLDAIR One Year Warranty Thank you for purchasing this Goldair product Your product is warranted against faults and manufacture when used in
4. normal domestic use for a period of one year In non domestic use Goldair limits the voluntary warranty to three months Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period This warranty excludes damage caused by misuse neglect shipping accident incorrect installation or work carried out by anyone other than a qualified electrical service technician PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY The benefits to you given by this warranty are in addition to other rights and remedies available to you under a law in relation to the goods or services to which this warranty relates In Australia our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure In New Zealand this warranty is additional to the conditions and guarantees of the Consumers Guarantee Act 1993 Goldair New Zealand Goldair Australia CDB Goldair CDB Goldair Australia Pty PO Box 100 707 PO Box 574 N S M C South Morang Auckland Victoria 3752 Phone 64 0 9 917 4000 Phone 61 0 3 9336 4423 Phone 0800 232 633 Phone 1300 GOLDAIR 1300 46
5. switched on press the SPEED button to select from the available fan speeds Low Mid High The corresponding LED Below the Lo Mi Hi markings on the control panel will illuminate OSCILATE Press OSC button to switch between oscillating fixed operation indicated on the control panel OFF TIMER Press the TIMER button repeatedly to set the fan to turn off after the specified period of time The Timer LEDs on the control panel 0 5H 1H 2H 4H will light up adding to the current timer setting For example to set the fan to turn off after 3 5hours the first three Timer LEDs should be illuminated Constant Hi Speed A Auto Changes between Hi Mid and Low speeds 30 mins in A 30 mins in B Constant Mid Speed B Auto changes between Mid and Low speeds Constant Low Speed C Changes between Low speed and OFF Changes between Low speed and OFF same as C above C USING THE MIST FUNCTION The Mist Function is useful for very dry days it increases the moisture content in the air This function may be used with OR without the fan blades in operation Before using the mist function there must be sufficient water in the water tank Valve Boay Humidifier Base Water Tank Upside down view Cleaning FILLING THE WATER TANK e Make sure the fan is off and unplugged e Pull out the lower end of the Mist Pipe then carefully remove the water tank e Turn
6. the water tank over and open the Valve Body Cover e Fill the tank with water up to 3 litres e Replace the Water Tank on the Humidifier Base e Replace the lower end of the Misting Pipe into the top of the Water Tank The Mist function can be set to one of 3 volume settings via the MIST button Low Mid High The corresponding LED BELOW the MIST marking but ABOVE the LO MI HI markings on the control panel will illuminate CLEANING THE UNIT The Fan requires regular cleaning to ensure trouble free operation Unplug the Fan from the mains supply before cleaning Ensure that the Fan blade has been allowed to stop down completely before cleaning Use a damp cloth not wet to wipe the exterior of the Fan to remove dust and dirt Remove the front guard and the blades carefully be careful not to drop the blades Use a damp cloth not wet to wipe the fan blades Light soap can be used for tougher stains Wipe thoroughly with a dry cloth replace the fan blade and lock the guard securely before use Use a vacuum cleaner to remove dust and fluff from around the grills Never use solutions such as benzene thinners or polishing agents Ensure the Fan is dry before plugging back into the mains supply Never spray with liquids or submerge the Misting Fan in water or any other liquid Do not attempt to dismantle the Fan motor There are no user serviceable parts For service or repair contact an authorised electric
7. 5 324 www goldair co nz www goldair com au Goldair One Year Warranty IMPORTANT Please complete and retain this warranty card Name Address Place Of Purchase Date of Purchase Name Of Product Model Number Attach a copy of the purchase receipt to this warranty card Due to continual design improvements the product illustrated in this User Manual may differ slightly from the actual product
8. al service technician CLEANING THE WATER TANK Make sure power is disconnected before any cleaning or maintenance is performed It is recommended that you clean the water tank every 2 3 weeks and clean the flume every week Pull out the water tank before cleaning it pull the plastic tube out of the mist cask properly then take out the mist cask and water tank Use a dry cloth to clean the mist cask If there are stubborn stains on the mist cask use a cloth lightly dampened with mild detergent If the mist feature will not be used for a long time empty the water tank and leave it to dry before recapping it Do not fill the water tank with water over 45degrees Celsius to avoid discolouration or deformation When ambient temperature is near or below Odegrees Celsius remove all water from in and around the tank to prevent ice forming which could damage components e Do not fill water anywhere other than the water tank Mop up any spills immediately Troubleshooting FAULT CAUSE SOLUTION 1 Mist projector works normally but without mist spray 2 Mist projector doesn t work 3 No indicator light no wind no mist 4 Peculiar smell from the mist 5 The fan doesn t work as normal PROOF OF PURCHASE Water could be contaminated with other substances or chemicals Water tank could be cracked Water tank could be empty Float is jammed Water tank could be empty Power cord is unplugged and
9. ater only Always remove plug from the mains supply before cleaning Never connect the appliance to mains supply until completely assembled and adjusted Never remove plug from power socket until the appliance has been switched off Never remove plug from power socket by pulling cord always grip plug Never twist kink or wrap the cord around the appliance as this may cause the insulation to weaken and split Always ensure that all cord has been removed from any cord storage area and is unrolled before use Never use this appliance in the immediate surrounds of a bath a shower or a swimming pool or other liquids The appliance must not be immersed in any liquids Due to the risk of injury never use this appliance for any purpose other than its intended use This appliance is intended for use in household and similar applications such as staff kitchen areas in shops offices and other working environments farm houses by clients in hotels motels and other residential type environments bed and breakfast type environments Never use this appliance outdoors The use of an extension cord power board or external timer is not recommended with this unit Never operate the appliance with a damaged cord or plug after it malfunctions or if it has been damaged in any manner Have the appliance checked and repaired by a qualified electrician if repair is necessary If the supply cord is damaged it must be replaced by the manufactu
10. e all packaging has been removed from the unit before use This appliance requires no installation it should be used solely as a portable appliance ASSEMBLING YOUR FAN Assemble the fan body to the Stand Tubes using Your Misting Fan has been boxed unassembled to the 2x screws provided minimise packaging waste Each part is designed to fit together and be disassembled easily for cleaning or storage Assemble the Base 4 to the Stand Tubes 1 using the screws 3 plate 5 and nuts 6 provided Slide the base cover 2 down the stand tubes 1 so that it covers the base To assemble the safety grill and blade remove the Spinner by turning it clockwise Place the rear safety grill into position Ensure the safety grill fits onto the locating lugs If this is done correctly the safety grill s carry handle will be at the top Fix the safety grill into position by replacing the Locking Nut tightly by hand Attach the Humidifier base to the Fan base using Locating Lug Locating Lug the screw provided Locking Nut Locating Lug NOTE Do not force or over tighten the Locking Nut Assembling your Fan The grove in the centre of the fan blade aligns with a T Bar on the motor spindle to ensure correct positioning Fix the blade onto place by gently hand tightening the spinner anticlockwise onto the end of the motor spindle NOTE The spinner is self tightening do not force it Spinner tighten anticloc
11. into a power source Make sure it is physically disconnected from the mains before doing anything with the water tank e When the water level is too low the safety switch will activate and stop operation of the mist function Unplug the unit and refill the water tank for further operation e Do not let dust or other particles collect on the mist plate if the mist outlets are blocked the mist function could malfunction e Before cleaning the unit make sure it is completely disconnected from the power source Make sure your hands are not wet when unplugging the unit Do not use very hot water in the water tank use water less than 40 degrees Celsius Use only water in the water tank Do not add chemicals or oils or any other additive e Infants the disabled and the elderly should not be in the direct airflow from the fan for long periods of time Control Panel CONTROL PANEL REMOTE CONTROL Mist Off Timer 0 5 7 5 hours rons oa us wo MIST ONOFF LED Display Oscillation On Off Mode Sleep Natural Normal ON OFF Operating your Fan MODE SELECT Insert plug to the electrical outlet When first switched on the MODE LED will illuminate p ON OFF tch th red indicating that the unit will operate in normal a SUS een E CREER mode Press the MODE button to select desired Mode The Mode is affected by the current Speed setting as follows ON SPEED SPEED CONTROL When
12. kwise Place the safety grill into position and secure it by fastening the clips over the outer rim The screw and nut at the bottom of the grill must be fitted PLACEMENT OF THE WATER TANK Valve Body Water Tank Upside down view Humidifier Base PLACEMENT OF THE MIST PIPE Place the Mist Pipe through the middle of the Stand Tubes then pull it up through the hole at the bottom of the Control Panel Guide the Mist Pipe forward through the middle hole in the Control Panel Fig 9 _ CUM The two free ends of Mist Pipe should now be the same as each other length is 335mm After adjusting the length push the top of the Mist Pipe to attach it securely to the central hub on the front of the grill see Fig 10 Attach the grey plastic ring to the bottom of the Mist Pipe then position it in the central hole on the top of the water tank Assembling your Fan ATTACHING THE CASTOR WHEELS OPTIONAL Place the four axis bushes 2 into the base weight 3 and then insert the four Castor wheels 1 1 Castor Wheel 2 Axis Bush 3 Base Weight REPLACING REMOTE BATTERIES 2x AAA size batteries are required not included Ensure batteries are inserted in the correct positive negative orientation Do not mix battery types When replacing ensure both batteries are changed simultaneously CAUTION Do not touch pull out put back the water tank when the unit is plugged
13. rer its service agent or similarly qualified persons in order to avoid a hazard Components gt LILAS Pda KIA Rie ANY Wy 7 46 K 1 fi pe y x ee PE CRAS NN i r x n pt nt I Safety Grille Tilt Adjustable Neck Stand Humidifier Base This product has both fan and humidifier functions which can be used together or separately The humidifier is especially useful on very hot days when the extra mist in the air helps not only to cool you down but also to increase the humidity in the dry heat HOW IT WORKS This Mist Fan uses ultrasonic vibration to atomise water into 1 5 micron particles which can then be blown through the room with the fan Ny Yf af si ae Wii i L DEL PR l WY Wy A P WP D f hil 1 WE FD A esd gt ys Sy K l Y A WAA NS in HI Ila AN Blade Assembly inside I jj SE LU D 4 Mist Pipe Control Panel Water Tank Base Cover Castor Wheel WHY IT IS USEFUL Not only does this fan help to cool you down with air containing micro water droplets it also helps to avoid dry skin and eyes which are common in dry heat A relative humidity of 45 65 is recommended for comfortable living and this fan can help maintain that balance in the hot summer months Assembling your Fan Always choose a safe location for the Fan keeping in mind the safety precautions outlined Ensur
Download Pdf Manuals
Related Search