User`s manual - Haier.com Worldwide
Contents
1. Fuzzy Min STANDARD MEMORY 60 SOAK REMAIN MINUTES pd 5 g BLANKET am am ECONOMY WASH 3 m m4 HEAVY a DELICATE POWER RINSE saa _ SEUAVaENN HOMES 1 SPEEDY am am TUB DRY gt ZT A DELAY PROGRAM bh o AIR DRY END Q START HOLD B G F E D C Indicator mode and meaning EE Off gt __ Flashing indicating the running program C On indicating the program about to run or the selection mode Child lock function e The function is intended for children safety and preventing the washing program from accidental changes by children e Push down the POWER button set desired washing procedures After setting push down the START HOLD button then hold the PROCESS button and DELAY END button The digitron displays CL The child lock function is activated All of the buttons are locked and can not make selection e Release the child lock function pushdown the PROCESS button and DELAY END button at thesame time for more 2 seconds After a beep sound the child lock function is released Digital tube REMAIN MINUTES During working it displays the remained reserve time minute In case of EEE trouble it displays the abnormal symbol see to page 16 Page 16 e During reserve it displays the remained reserve time hour A POWER button POWER Push the POWER button to switch on the power Under power on mode push it to switch off the p2. Adjustable leg Fixed leg 2 pieces Meaning and description of the symbols Warning sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users Please operate in strict conformity to the contents otherwise it may cause damage of the machine or injure the personal safety of the user Forbidding sign Contents marked with that symbol are actions forbidden to perform Performing of those actions may result in damage of the machine or injure the personal safety of the user Please understand the shapes of thewashing machine andaccessories may be different from the sketchfigures in this manual due to product improvement Safety precautions Do not stretch hands into the working machine l It is dangerous even if the rotation is slow Take special Do not decompose repair or alter the machine care of the children This appliance is not intended for use PY yourself by persons including children with reduced physical sensory or mental capabilities DN or lack of experience and pS knowledge unless they have been given supervision or instruction NE y concerning use of the appliance by a person C J responsible for their safety Do not put any hot or heavy items such as the kettle Do not wash laundries with volatile materials with hot water on the washing machine such as thinner petrol etc The handicapped or children withou
3. like the bathroom Never wash it with water Not put wet laundries on the control panel Do not wash water proof laundries like the raincoat bike covers etc to avoid abnormal vibrations in spinning Do not let the machine share one receptacle with other electric appliances If the power plug is damaged or the plugging into the receptacle is loose do not use the plug any Ae Installation and adjustment Please install and adjust the machine according to the requirement of the manual It is very important to your security and correct operating the machine Install the bottom plate After opening the package please lean the washing machine gently down onsoft items like to welcloth blanket etc Install the bottom plate to the bottomof the machine with eight screws by across screwdriver then lift the machine up gently See to the figure Bottom plate N ene Adjust the installation position The largest allowed slope of the base of the machine is 2 The slanting or rough ground will result in unstable running or stoppage of the machine Please adjust it with following methods Confirm it s horizontal Hang the lead line to confirm if it is horizontal e Adjust the adjustable foot 1 Your washer has 2 leveling legs which are located on the front bottom corners 2 After properly placing your washer in its final position you can level your washer 3 Leveling le
4. Automatic washing machine User s manual This manual is for HWM110 9188DD Please read this manual carefully before using Retain it for future reference Contents P ene of the parts seed E E A E ees eeeeeeeens Preparation before EES 8 daa a a Put in the laundries 882 toe tee cee cee cee cee cee cee cee cee cee cee cee eens Usage of the Operation ButtonSececcecee cece cee ce eee e cee cee cece Close the top liClece cee cec ccc cccccc ccc cccccc ccc cec cesses ses scsecsscseceees Finish WASNING sss correc reece eee cce ces ces cee ceceecceeccr cesses ses ces ces After washing tie deewbeewk naw We wa E E E E S EE E E E E dee becuse Trouble A answer 1 AnA cccsooccocooosoooooooocooooooo Safety precautionSs s ore vee eee cee cee cee tee tee cee cee cee cee cee eee eee oe Installation and ACIUSUNEN Lt ee ote teen e eee tenets ser ees es Usage of detergent ee Sok eee we eee RES See E E Ge Sek Wear wee wee wee we Packing list ste sasssa sste the Dack Cover E emcee es back an Names of the parts Top lid component Detergent box J aa yj S Water absorption Liquid detergent inlet f 7 2 Outer tub cover Screw cover Control pannel A Water inlet valve Hook Power cord Handl Inner tub a anae Filter frame Pulsator 5 Lint filter Drain hose Panel Cabinet Base frame Adjustable leg film Back cover
5. al tube will display the delay time for finishing of washing in hour The indicator will flash to indicate that the delay function is working F PROCESS button one or more one programs among SOAK WASH RINSE SPIN can be selected G AIR DRY button Push the AIR DRY button to select air dry procedure The program is chosen 15min 30min AIR DRY 45min 60min The purpose is drying laundries at the same time can dry the outer tub and the inner tub which can avoid growing mildewon the outer tub and the inner tub The max drying capacity of the fibre laundries is 3 0kg AIR DRY program can not be reserved 11 Operating procedure 1 Push the POWER button to switch on the power EE 2 Push the PROGRAM button to select the suitable automatic program PROGRAM ae iL e After switching on the power the machine will set to standard program auto matically To select other program push the PROGRAM button till the corresponding indicator is on Refer to the PROGRAM button in Page 11 For an example selectSPEEDY for the quick washing of the laundries with light dirt e When a STANDARD or MEMORY cycle is selected the fuzzy program is run The water level can be selected according to be texture and volume of the laundry 3 Push PROCESS button to select suitable procedure CAET After switching on the power the machine will set to WASH RINSE SPIN program automatically That is the most common program To select o
6. and smooth If not please file it to avoid leakage Connection between the water inlet hose jointer and the water faucet 1 Press the lower end of the lock lever and push down the slider Take off the water inlet hose jointer from the water inlet hose component See to Figure 1 2 Take off the nameplate Make sure the threading is 4mm above the upper surface of the nut See to Figure 6 Ifthe threading is less than 4mm above the upper surface of the nut please loosen the screws water inlet hose jointer Slider Nameplate Bushing water inlet hose Figure 1 Figure 2 Figure 3 3 Loosen the screw till the water faucet can be accessed Put the jointer of the water inlet hose on the faucet See to Figure 2 If the faucet is too large and the jointer can not be set on the water faucet please loosen the four screws and take out the bushing in the jointer The front end of the faucet must be smooth otherwise it may leak water See to Figure 3 4 Fasten the four screws evenly See to Figure 4 5 Twisting the fastening nut See to Figure 5 After twisting the threading is less than 2mm above the upper surface of the nut about 4mm after twisting About above 2mm after twisting Screw nut Figure 4 Figure 5 Figure 6 Connection between the water inlet hose and the washer 1 Do not take off the water absorption cushion Please check if the cushion is dropped or damaged before each usage If it happens please contac
7. chine slanting Are the laundries slanting in spinning Insert the power plug tightly Close the top lid Put the laundries orderly Level the machine properly Re order the laundries The water faucet leaks Common phenomena Phenomena The spinning is intermittent when it starts Is the jointer screw of the water inlet hose is loose or twisted awry Fasten the jointer screw properly Explanation Balance the laundries to avoid slanting Select spin program but it does not work The program is setting the drain time certain period is needed before it starts spinning There may be some water flowing out of the drain hose in the first use of the machine by the factory tis the water remained performance inspection The pulsator pauses during water inlet in wash It is to avoid splashing during water inlet and rinse 16 Packing list Name Quantity User s manual 1 Warranty Card 1 Water inlet hose Tapping screw Automatic washing machine Specification Rated voltage frequency 220V 240V 50Hz Rated Washing spinning capacity 11 0kg 11 0kg Water level Water quantity L 1 21 2 32 3 42 4 51 5 60 6 69 7 77 8 94 Inlet pressure 0 03MPa 1 0MPa Weight 45kg Dimensions mm L 660mm W660mm H1055mm
8. ft figure The softener will put into the washer when the last rinsing After that please close the detergent box Refer to the following list for the usage of the detergent selection of the water level water quantity and dosage of detergent After the softener is put in please don t place for a long time otherwise softener may solidify and cause flowing not smooth How to use washing powder Itis suggested to add washing powder into the box directly under fuzzy program and reserve program Dissolve directly inside the washing machine not applicable for fuzzy and reserve program 1 Add some water select 1 water level 2 Add washing powder Run for about 30s to fully dissolve the Powder Then push the START HOLD button 3 Put in laundries Select suitable water level Push the START HOLD button again Quick dissolving of washing powder 1 Prepare warm water of 30 C and container 2 Add washing powder while stirring to dissolve it completely Please add suitable washing powder as per the laundries quantity the set water level and water quantity if you select SPEEDY program it is suggested to use liquid detergent instead of washing powder to guarantee the washing effect It is not recommended to use rich foam washing powder Washing powder with poor quality or long time storage may get caked Please clean the detergent box duly in usage Usage of the Operation Buttons Explanation of Buttons
9. g machine is earthed reliably Then insert the power plug into the receptacle The earth terminal shall not link to gas pipeline and faucet water pipeline 3 Put down the drain hose Pay attention to followings before washing the laundries Check if thelaund Clear the pocket Tie the longstrips The quantity ofthe When the pulsator is ries has special Takeout the coins fasten the buttons laundries shall not running the buttons of requirementon Sand hairpins etc close zippers be too large Stretch the laundries may cause washing and loosen thelaun noise For the sake of dries before putting discretion please put the them in the tub laundries with buttons into other laundries i lt 2 gt O a Check if the laundries are applicable for washing with machine b Divide the laundries that are not colorfast from other laundries c Put those laundries difficult to absorb water into water with hand d For those laundries with heavy soil please first remove the dirt like mud or dust For the parts with heavy soil please apply detergent on them inadvance which can make it easier to removethe soil e For those laundries that may get lint ball and those with long fur turn it over before putting in f Do not put those laundries polluted by chemicals into the washing machine directly Put in the laundries The capacity of washing and spinning of the machine refer to the largest weight of
10. gs can be adjusted by turning them counterclockwise to raise your washer or turning them clockwise to lower your washer the adjustable leg WARNING Leveling of washer is very important to prevent vibration during spin How to change the direction of the drain hose 1 Lean the machinedown gently withthe front 3 Extend the drain hose from the left side Push the surface facing the ground drain hose into the groove with hands vey Soft item ee s S Use groove at this side after 4 Install the bottom plate as per indicated before direction changing then lift the machine up gently The drainage shall be smooth with the drain hose 1 The height of the drain hose shall be less than 10cm 4 lf extra drain hose is needed please make separate or the drainage will not be smooth and cost such long purchase The inner diameter of the extra hose shall time that the machine may stop at mid way not less than 30mm and the length shall not exceed 2 Do not step on or press the drain hose 1 5m Ly ae E 3 If the drain hose is too long cut it at mid point To make _5 If the extra hose is too long cut it either at A or at B smooth drainage cut the front end of the hose slantingly TRA ooo ood i Confirm the water faucet water faucet suitable water faucet not suitable The exit end face of the faucet It is required that the front end shall be longer than 10mm The exit end face of the faucet shall be flat
11. low drain the digitron displays E1 buzzing Running pauses during spin the digitron displays E2 buzzing Is the drain hose put down Is the drain hose blocked by foreign material The top cover leaves open Put down the drain hose Open and close the top lid once Clean the foreign material Open and close the top lid once Close the top lid Safety switch actuates not spin after self correction twice the digitron displays E3 buzzing No or slow water filling the digitron displays E4 buzzing Not wash The machine does Are the laundries put slantingly Is the machine slanting The water tap is not open The water inlet valve is blocked The water pressure is too low andthecurrentis too small Is there power failure Is the power plug loose Does the water level arrive at the set water level Is the top lid closed Re order the laundries Close the top lid Level the machine in right position Open and close the top lid once Open the water tap Push the Start Pause button Clean the water inlet valve Push the Start Pause button Wait for the normal water pressure Before use Use it when the power is on Insert the power plug tightly Affusion to the set water level Close the top lid not act Not spin There s abnormal sound inside the machine Is the power plug loose Is the top lid closed Are the laundries put orderly Is the ma
12. ower Push the POWER button to switch on the power If the START HOLD button is not pushed the machine will switch off the power automatically after 5 minutes B START HOLD button After the poweris switched on press it to start the machine e During working push it to pause ee e During pause push this buttonto restart and go on working 10 C PROGRAM button Program Application Program Application The commom wash the washing machine PROGRAM STANDARD Standard saving washing for norm al laundries MEMORY Wll set fo MEMORY program including wash rinse and spin automatically last time BLANKET Washing the relatively big and thick laundries ECONOMY Washing the cotton textiles HEAVY Washing the relatively big and thick laundries DELICATE Washing for light soil saving laundries SPEEDY Quick washing for normal laundries TUB DRY Ale el mildew On he ouier tuk and ihg inner tu D WATER LEVEL button You need to select the water level by yourself e f you put in wet laundries you need to select suitable water level manually Refer to water level water quantity and selection of powder in page 9 e During Soak Wash and Rinse press this button to manually replenish water Release to stop Function automatically is inactive when water reaches overflow protection level E DELAY END button During operation the digital tube will display the remained time Push the delay button The digit
13. p aslant and gently 2 The method of install install it upwards and aslant Dismantle Install Install Figure 1 Figure 2 The filter screen of the water inlet valve is likely to be If the cabinet is dirty wipe it with wet cloth blocked by foreign materials and influence the water Do not flush it directly with water inlet Wipe it with neutral detergent Please clean it with brush every two months Do not wipe it with thinner petrol alcohol etc 1 After washing close the water faucet If needed you can dismantle the water inlet hose 2 Do not store water in the washing machine for a long period Drain the water completely after each using 3 Be sure to pull off the power plug before maintenance 4 Hang up the power cord and drain hose 5 Wipe off the water drops on the surface of the machine and inside the tub Open the top lid for some time about 1 hour then close the top lid 18 Trouble shooting Answer to question If there s breakdown please pull off the power plug before checking The following phenomena are not breakdowns sometimes Please confirm again before sending it to repair If there are real breakdowns please come to the special maintenance department or after sale service department of our company Do not repair it by yourself Phenomena Buzzing upon reservation starts the digitron displays EO Thereason The top lid is not closed How to settle Close the top lid No or s
14. serve washing The washing will finish about 18 hours later To change the running program or cancel reserve you shall switch off the power and make new selection The water inlet pressure and water level can influence the finishing time of washing 7 Push the START HOLD button ely START HOLD 13 Close the lid Excluding during filling water procerdure f you open the top lid the machine will stop working and alarm before spinning Finish washing 14 After washing After using please clean the lint and foreign materials of the lint filter etc in time Otherwise it may influence your using the machine Please first pull off the power plug from the receptacle before cleaning The lint filter must be used during washing it must be cleaned in time after each using Lint filter 1 Push down the spring piece of the top lint filter to make the and push it in claws out of the filter cover and then pull out the lint filter to get itdown Cfigure1 2 Pull the back of the lint filter and then you can get down it off the front cover of the lint filter figure2 3 Sweep the rubbish in the lint filter 4 Put the back of the lint filter into the front cover 5 Put the lint filter into filter cover and make it tight 6 Make sure the lint filter well installed or it can influence your use Clean the detergent box and set it on the control panel seat 1 The method of dismantle Push it u
15. t care shall not Keep the machine away from direct sunlight and use the machine heat source like the heater The lint filter shall be kept in good condition and installed to proper position If the lint filter is lost Install or damaged please contact the local after sales ismantle service department of our company a Safety precautions Please plug the power plug on special receptacle Be sure to use three pins power receptacle Ensure that the earthing prong of the power receptacle is earthed reliably Use leakage protector if possible The washing machinemust be positioned so that the plug is accessible Be sure topull the plug off and close thewater faucet infollowing cases power failure delivering the machine setting the machine idle orcleaning the machine Do not plug or pull the power plug with wet hand Do not bend extend twist bind by force Do not press or nip it with weight Keep the pin of the power plug clean if the power plug is polluted with dust please wipe with dry cloth carefully lf the power cord or the power plug is bad to avoid risk it is required to have it replaced by the technicians of our special shop or our customer care agent In case the washing machine is installed on ground with carpet do not block the ventilation hole with carpet K 0 me NS The ventilation holes at the bottom Soft object Do not use water hotter than 50 C Do not put the machine at damp place
16. t our after sale department immediately 2 Put the nut of the water inlet hose on the valve jointer 3 Fasten the nut Swing it gently to confirm if it s suitable jointer of the water inletvalve water absorption cushion 1 Push down the slider Insert the water inlet hose into the jointer the jointer of the water inlet hose 2 Hang the lock lever to the jointer Release the slider till a click sound is heard 1 Swing the hose gently to confirm if it is fastened stable 2 After installation open the faucet to check if it leaks 3 Do not bend the hose with overstrain 4 Before each usage please check if the connection between the jointer of the water inlet hose and the water faucet and the installation of the water inlet hose are firm so as to prevent dropping from improper installation position Dismantle the waterinlet hose 1 Close the water faucet 2 Press the locking lever Push down the slider Then pull of the water inlet hose If the machine is used frequently the jointer of the water inlet hose can be kept on the faucet to prevent damaging the fixing screw Note The instructions for appliances connected to the water mains by detachable hose sets shall state that the new hose sets supplied with the appliance are to be used and that old hose sets should not be reused Preparation before washing Preparation before washing 1 Connect the water inlet hose Open the water faucet 2 Confirm that the washin
17. the standard laundries under dry condition that can be washed or spinning in one time One time washing quantity shall belower than the ratedcapacity The largest capacity of this machine is 11 0kg The thickness size type of the cloth will influence the actual washing capacity It issuitable for onetime washing to put in reasonable amount of laundries and the laundriescan be turned round in washing Liquid whitener inlet Washing powder inlet Detergent box How to use liquid detergent Put the liquid detergent box on the left of the detergent box See the above figure Before washing put the liquid detergent into the liquid detergent box directly as indicated the above figure The usage and dose of the liquid detergent as per the specifications of liquid detergent How to use whitener Add water to stipulated level Dilute the whitener with container and then pour it into the liquid whitener inlet slowly Laundries with color or pattern is not colorfast thus not applicable The whitener shall not touch laundries directly See to the manual of whitener for the usage and dosage For whitener in powder dissolve it before use Do not select above 8 water level for laundries small than 2 0kg so as toavoid splashing of water The usage and dose of the softener as per the specifications of softener Before washing put the softener into the detergent box directly as indicated in the le
18. ther program push the PROCESS button to select oneor more procedures among SOAK WASH RINSE SPIN Refer to the Process Selection Method for the selection inPage 11 Page rf Attention Even there s no water in the tub the spinning will start after a certain period Do not use the SOAK program for the woolen laundries Wash the laundries that are prone to lose colors separately from other laundries while washing soft laundries such as silk stockings and textile please put into a wash net which can get by shopping 12 4 Push the WATER LEVEL button to selection suitable water level When the power is switched on you need to set the suitable water level by yourself Refer to the water level water quantity and selection of powder in Page 9 and water level in Page 11 for the selection 1 Air drying could reduce time drying in the sun fibre could be dresson after ironing Refer to the AIR DRY button in Page 11 Page 11 5 Push the AIR DRY button select Air dry END 6 Push the DELAY END button to select the suitable reserve program es When the power is switch on the Delay program is disabled automatically If you need to finish the washing in reserved time please push the reserve button to select suitable program Refer to the Delay button in Page 11 Page 11 Confirm the reserve program When the reserve program is started the digital tube will display the finishing time of the re
Download Pdf Manuals
Related Search