User Manual YSW-5E
Contents
1. 2 1 1 Power Saving Function Setting E CL i E eis 12 2 1 2 Automatic Power off Timer Setting C IS L TT 12 2 1 3 Hi Lo OK Function Setting 1 th Pea a ee oe 14 2 1 4 Restore to the Berau Setting IS C Pb E a TT 15 2 1 5 Noise Filter Setting T lle Mele E E 16 Do Weight Calibration AEs acs aes nce conetaseteetece ane ee 17 Appendix1 7 Segment Display Characters eee 18 02005324 1 ZSME300000255 EXCELL EXCELL PRECISION CO LTD Thank for your purchasing of our EXCELL Weighing Scale To guide you to use our product correctly please read this Manual carefully to extend the life of machine and to avoid error Instruction for Use 1 Please keep the scale in a cool dry place Do not store it at high temperature 2 Avoid objects impacting with the scale Do not drop loads onto the scale or subject the weigh pan to any strong shock loads 3 The load placed on the weigh pan must not exceed the maximum weighing capacity of the scale 4 If the scale is not going to be used for some time please clean it and store it in a plastic bag in dry conditions A desiccant sachet may be included to prevent any moisture build up 5 Please do not use your hand and sharp things to touch the waterproof film in order to protect the scale 6 If you want you can use the four screws to lock the platter so that it will be more firm When you lock please follow the order 1 2 3 4 02005324 ZSME300000255 EX2. CELL EXCELL PRECISION CO LTD 7 Please push the clip to take off the dust cover to clean Preparing to Use the Scale Ts Adjust the four levelling feet if fitted to set the scale pan level using the spirit level bubble located at the front of the scale 2 Avoid operating the scale in direct sunlight or drafts of any kind 3 If possible avoid connecting the scale to ac power outlet sockets which are adjacent to other appliances to minimise the possibility of interference affecting the performance of the scale Remove any weight that might be on the weigh pan before the scale is switched on and avoid leaving weight on the pan for long periods of time All goods weighed should be placed in the centre of the weigh pan for accurate weighing The overall dimensions of the goods being weighed should not exceed the dimension of the weigh pan We suggest to warm up the scale for 15 20 minutes before operation to ensure best accuracy Please note when the symbol keeps flashing on the screen the batteries need to be replaced Introduction of Storage Battery 02005324 3 ZSME300000255 EXCELL EXCELL PRECISION CO LTD Due to the storage battery adopt the advanced free maintaining technique customers need not to replenish electrolyte The scale should be recharged every 3 months to prevent failure of the internal rechargeable battery 1 The battery should be charged for 8 10 hours 2 The temperature of battery should
3. EXCELL EXCELL PRECISION CO LTD Since 1979 www excell scale com User Manual Waterproof Weighing Scale YSW 5E Excell Precision Limited 2015 All rights reserved Worldwide The information contained herein is the property of Excell Precision Limited and is supplied without liability for errors or omissions No part may be reproduced or used except as authorised by contract or other written permission The copyright and the foregoing restriction on reproduction and use extend to all media in which the information may be embodied 6F No 127 Lane 235 Pao Chiao Rd Hsin tien Dist New Taipei City 231 Taiwan Tel 886 2 8919 1000 Fax 886 2 89191177 EXCELL EXCELL PRECISION CO LTD Table of Content Instruction for USSnsinannnanna n e a a e e a e a Ea 2 Preparing t Use the Scale eree Ee eet hal lea hl eal eeen hl il eked eitie 3 Chapter T Ties lbe al er meneran i coe na a pi ie E al a oaield 5 1 1 Features and Specifications ccccccccccseeseseeeeeeeeeeeeeeeeeseeeeeeeeeeeeeaaaasseeeeeseeeeeeees 5 T2 Power SUPPLY Te D e e E E ae DE Eee oes 6 1 3 Display and Keypad Introduction sss 6 TA Self lest M d e tet a a hate e e tet ete nat hal tat het sees 8 SDK ned MESSAGCS aica cei ah ee a heel a oe a oid od eed hot a eed i bod it dda 9 TSG Weight RTT TT 9 Chapter 2 External Function Setting sss ee ee eren er ee ee ee ee ee ee eee eee 10 2 1 General Function Setting mi L Suid hoe ER A a da anii 11 as ga I
4. O or UNITS key to key in arameter Use ON ZERO or UNITS key to key in paramete gt O Press TARE key 0 gt No auto power off 1 When the scale is idle for 1 minute the scale automatically switches off 2 When the scale is idle for 2 minutes the scale automatically switches off Press TARE key 9 When the scale is idle for 9 to complete the minutes the scale general setting automatically switches off S i SITES See ee EN oe E E OT E E E E E E AG S ON ZERO key gt Upward key from 0 to 9 Key in the parameter 00 UNITS key gt Downward key from 9 to 0 ARE key gt Move the cursor to right NET GROSS key gt Move the cursor to left Automatic power off function When the weight on weigh pan is less than 10d or keeps idle for the set time the scale will automatically switch off 02005324 13 ZSME300000255 EXCELL EXCELL PRECISION CO LTD 2 1 3 Hi Lo OK Function Setting mi i oe Select ani L L I in the General Function setting mode I 1 Wi L to set the Hi Lo OK function This function is available in all unit modes In one specific unit mode enter r fe L i si to set the Hi Lo OK values ACTIONS DISPLAY NOTE MINN oO pa ted n S gen e D m O O A h Cc J O ER O TA Q n je a oO Q l ON ZERO key Upward key from 0 to 9 UNITS key gt D
5. TD 2 1 1 Power Saving Function Setting rit L Select mii Lt tin the General Function setting mode Itt Frit to change power saving function setting ACTIONS DISPLAY NOTE Press TARE key The displays shows the last status Default setting off Use ON ZERO or UNITS key to select function on or off Power Saving Function Setting Use ON ZERO or UNITS key to select Press TARE key On power saving on Off power saving off Key in the parameter 00 I ON ZERO key Upward key from 0 to 9 UNITS key gt Downward key from 9 to 0 to complete the TARE key Move the cursor to right sn R NET GROSS key gt Move the cursor to left Press TARE key Power saving function When the weight is over 10d the display shows normal If you press the key the display still shows normal When the scale returns to zero or you do not pressing any key it will enter into power saving mode after 10 seconds 02005324 12 ZSME300000255 EXCELL EXCELL PRECISION CO LTD 2 1 2 Automatic Power off Timer Setting F mi ic L D riL I l Z 9 Select iiL LLC in the General Function setting mode L 1 Y ii to change the automatic power off timer setting ACTIONS DISPLAY NOTE Press TARE key LED displays the last status utomatic power off timer setting Use ON ZER
6. below 45 C Maintaining 1 Please do not discharge with over current when using the battery Please charge the battery after discharging current 2 Please take down the battery when the scale is not used for a long time or break the connection of cathode 3 Do not short the battery terminals to check whether there is current Please check whether the connection point is firm to guarantee good connection 4 The battery should be replaced by specialized person No reverse battery or the product will be damaged a Anode of battery should be connected with Anode of product battery usually red cable b Cathode of battery should be connected with Cathode of product battery usually brown cable or black cable c See the picture following Brown cable or black cable connected with Anode of battery Safety warnings 1 The electrolyte of battery is caustic which causes metal cotton etc to corrode 2 The hydrogen will be resolved when using or charging the battery and it will cause explosion when approaches fire R S A No burning Caution Corrosion Warning explosion Children faraway 02005324 4 ZSME300000255 EXCELL EXCELL PRECISION CO LTD Chapter 1 Introduction 1 1 Features and Specifications Features Sealed waterproof silica gel strip blocks water from infiltrating into the scale Surrounded by waterproof grade sheeting to ensure the water free 1 3 000 1 6 000 display resolutio
7. e display is the total amount of the tare value When the GROSS icon is off the weight value on the display is the net value press the NET GROSS key to switch between the Net value and the Gross value At the Gross status only OFF and INET GROSS keys are functional 02005324 ZSME300000255 EXCELL EXCELL PRECISION CO LTD 1 4 Self Test Mode Set the switch SWA1 on the bottom of machine to the LOCK position When the scale count down press NET GROSS and ON ZERO key together Wait till display shows TE zs Lt l E I L to enter Self Test Mode UNITS key Press ON ZERO UNITS Press ON ZERO UNITS Press ON ZERO key I ate _ INTERNAL VALUE MODE must hook up Load Cell to test Press TARE to enter and the display shows internal value Please check whether the internal value has changed obviously with weight changing Please check the backlight Press ON ZERO key to back to the last screen the display shows L C Z 1 KEYPAD TEST MODE E T Press TARE to enter display shows CC 2 i Keypad s internal code TARE key 07 gt UNITS KIE 06 NETEROSS key 05 Press ON ZERO 10 OG ot FIRMWARE VERSION ale MODE O P
8. e units available are dependent on the exact scale model After power off the scale will memorize the active units When the scale is powered on again it displays the previously active units TARE tare pre tare key The tare function will not operate during the following conditions When the scale powers on the weight is still below zero after a container is placed on the weigh pan Or the tare value is over the full scale capacity Tare function 1 Put a container on the weigh pan and after the weight is stable press the TARE key to zero the weight of the container The screen displays the gt 0 STABLE icon 2 Put the goods in the container the screen displays the net weight value of the goods 3 Remove the full container the screen displays the negative weight value of the container At this time pressing the TARE key again will cancel the tare and the scale reverts back to zero The screen displays the gt 0 STABLE icon The tare function can be operated continually to the full weighing capacity of the scale Continual tare operation is adding or removing tare objects on weigh pan and pressing the TARE key each time NET GROSS switch NET or GROSS key NET GROSS key is only used in Tare mode In the Tare mode the screen displays the Net icon In tare mode when the GROSS icon is on the weight value on th
9. e when the symbol keeps flashing on the display the batteries should be changed The scale will turn off automatically after 1 2 hours when the low battery warning symbol shows up The scale must be fully charged before operating again Low battery shift voltage 5 3V DC m MUIL 1 3 Display and Keypad Introduction gt 0 STABLE GROSS L1 L2 Units indication Icon Introduction 2 ee rE O L kg gt 0 Zero point indication O O 2 STABLE stable indication 6 O Bi vies GROSS gross weight indication Low battery indication When this symbol is flashing replace the batteries L1 L2 Units indication HI The weight on weigh pan is greater than the high limit LO The weight on weigh pan is lower than the check value Keyboard Function OFF power off ON ZERO This key possesses two functions Power On and Zero function When the scale is off press the ON ZERO key the scale will switch on When the scale is on the ON ZERO key has zero function 02005324 6 ZSME300000255 EXCELL EXCELL PRECISION CO LTD When the weigh pan is empty free of load and the display is not showing zero press the ON ZERO key to zero the scale At zero the gt 0 indication is on UNITS switching units Press the UNITS key to switch weight units the icons or arrows will indicate the active units as appropriate Th
10. ey from 0 to 9 Key in the parameter 00 UNITS key gt Downward key from 9 to 0 TARE key gt Move the cursor to right Press key to complete the NET GROSS key gt Move the cursor to left general setting 0 The default setting includes the following 1 External weight calibration 2 HI LO OK setting value 3 Noise filter setting External 4 setting is not available for OIML NTEP and Sri Lanka approved models 02005324 ZSME300000255 15 EXCELL EXCELL PRECISION CO LTD 2 1 5 Noise Filter Setting Pe OD D 1 NZ DiI l I Select I rit_ tt In the General Function setting mode L rit ii to set the noise filter setting ACTIONS DISPLAY NOTE Returning to zero point setting LED displays the last status Press TARE key Returning to the zero point setting Use JON ZERO Jor UNITS key to key in the parameters or zero point Default setting 0 Use ON ZERO or 0 gt No skip 5 gt skip 5d key to key in the 1 gt skip 1d 6 gt skip 6d parameters 2 gt skip 2d 7 gt skip 7d 3 gt skip 3d 8 gt skip 8d 4 gt skip 4d 9 gt skip 9d S When the weight on the scale is over Press TARE 1 3 full capacity the function is on Digital switch amp Stabilization range setting LED displays the last parameter setting Digita
11. ht side keeps flashing When the digit on the right flashes ensure that the weigh pan is empty Then Press the key The scale is calculating the internal value of the zero point After stabilization the LED shows the nE a calibration weight value After stabilization Place the displayed weight on the weigh pan Press the TARE key The scale calculates the full capacity internal value and after stabilization the buzzer beeps 3 times Remove the weight from the weigh pan and the procedure is completed ON ZERO key Upward key from 0 to 9 UNITS key gt Downward key from 9 to 0 TARE key Move the cursor to right NET GROSS key Move the cursor to left i N se sme Sm E mc For approved models IE _ is disabled Weight calibration conditions The calibration weight value placed on the weight pan must be over e100 and the standard deviation of the weight must be within 10 02005324 17 ZSME300000255 EXCELL EXCELL PRECISION CO LTD Appendix1 7 Segment Display Characters 7 segments letter Digit Alphabet 7 segments letter Alphabet 7 segments letter 02005324 18 ZSME300000255
12. l switch amp Stabilization range setting Use ON ZERO or UNITS keys to key in the parameters Default setting 0 Parameter 0 9 the larger the number the more stable the weight Use ON ZERO or key to key in the parameters Press TARE key Use ON ZERO or key to key in the parameters Filter parameter setting LED displays the last parameter setting Filter parameter setting Use ON ZERO or UNITS keys to key in the parameters Default setting 5 Parameter 0 9 the larger the number the faster the filter response Fast response can lead to weight instability Press TARE key Key in the parameter F L iii and then press TARE key to go back to the Advanced function setting menu LI 1 Frit L i L LI D setting is not available for OIML NTEP and Sri Lanka approved models 02005324 16 ZSME300000255 EXCELL EXCELL PRECISION CO LTD 2 2 Weight Calibration O lt EL In the weighing mode press the INET GROSS and ON ZERO Keys a the same time to enter the External Function setting mode The LED shows it tor L and uses the NET GROSS pr UNITS key to select L C CL to enter the weight calibration mode ACTIONS DISPLAY NOTE Press TARE key The LED displays the calibration weight value the maximum capacity of 1 unit and the unit The digit on the rig
13. n available Aluminum frames coated with anti corrosion treatment for longer lifespan LED or LCD display model available Stainless steel made feet and platter for anti rust High speed of 24bits AD fast reacts and shortens the weighing operation duration Selectable units Kilogram kg gram g ounce oz and pound Ib weighing units available Built in rechargeable battery can be easily replaced Vertical placement design battery prevents from electrolyte leakage and makes more safety and durable Low power indication and auto power off Well designed protection point for transportation Securable platter with screws at users needs Options Double sided display Specifications Model Capacity Division Resolution 0 5 1 6000 ais og ie 1 3 000 1 1 6000 toe ekg 29 1 3 000 2 1 7500 YSW 15 15kg 5G 1 3 000 5 1 6000 YSW 30 30Kg D 1 3 000 Operating Temperature 0 C 40 C 32 F 104 F Dimensions 250 4 x 144 x 313 mm WxHxD Weight of the scale Around 3kg 02005324 5 144m ZSME300000255 EXCELL EXCELL PRECISION CO LTD 1 2 Power Supply Power Supply Selection 1 6V 4Ah 6V 7Ah storage battery 2 AC 110V 240V 10 adapter Power Consumption 25mA system L C front display power saving mode 35 mA system L C front and back display power saving mode 55mA system L C front display 70 mA system L C double display Low Battery Warning Please not
14. ownward key from 9 to 0 Press TARE key TARE key Move the cursor to right NET GROSS key Move the cursor to left fe i i a ee Key in the desired high limit value LED displays the last status Press TARE key LED displays the last status Key in the desired low limit value LED displays the last status Press TARE key The definition of a b c positions a gt 1 beep sound on Key in the parameter 0 beep sound off setting for alarm b 1 beep sound on when stable 0 beep sound on when unstable c gt 1 beep sound on when the weight is between high and low limits 0 beep sound on when the weight is not between high and low limits and higher than 10d Press TARE key Key in the parameter E L LJU and then press TARE key to go back to the ri R L Ll Advanced function setting menu LJ 1 Fmi 02005324 14 ZSME300000255 EXCELL EXCELL PRECISION CO LTD 2 1 4 Restore to the Default Setting F mi i ria I rtt_ to restore to L 9 I Di i Select mit_ tt tin the General Function setting mode L 1 the default setting ACTIONS DISPLAY NOTE Press TARE key Eur C gt Return Cancel the restoration Use ON ZERO or UNITS keys to select return or format C gt Restore to the default Press TARE key ON ZERO key gt Upward k
15. ows LJ 1 Frit UNITS Press ON ZERO UNITS Press ON ZERO UNITS Press ON ZERO UNITS iiL gt General Function setting mode L External Weight Calibration I I 1 t Function Reserved I ZL Exit the Advanced Function setting mode Refer to the following sections for the detailed operation procedures of each function setting 02005324 10 ZSME300000255 EXCELL EXCELL PRECISION CO LTD 2 1 General Function Setting There are 7 functions in general function setting mode from E Workflow of the General Function setting ACTIONS DISPLAY G Ta E a ee ee ee Shee 41 ON ZERO key Upward key from 0 to 9 r UNITS key gt Downward key from 9 to 0 ARE Press TARE key ihe A Use the keys to select the function Key in OO and press TARE key to return to the Advanced function setting menu Power saving Function Settings Automatic Power off Timer Settings Hi Lo OK Settings Restore the Default Settings Noise Filter Settings Function Reserved Function Reserved key gt Move the cursor to right NET GROSS key Move the cursor to left Return to the Advanced Function Setting Mode Menu Refer to the following sections for detailed operation procedures of each setting 02005324 11 ZSME300000255 EXCELL EXCELL PRECISION CO L
16. ress TARE Press TARE key guilt the display te maintenance number i for 2 secs Press ON ZERO key to back to the last screen display shows L SE 7 LE ZL BACK TO THE LAST SCREEN Press key to exit self test mode the scale will restart automatically 02005324 8 ZSME300000255 EXCELL EXCELL PRECISION CO LTD 1 5 Error Messages LI gt Unable to read the EEPROM The EEPROM is not mounted yet or the circuit near EEPROM is broken i Initial zero is higher than the zero range when switching the scale on approval models Initial zero is lower than the zero range when switching the scale on approval models Internal value is below Zero Uuu A D IC malfunction cannot read A D value The load cell may not be connected to the scale correctly L y The weight of the object is over 9 divisions of the maximum capacity L U A D IC value is over the maximum range Lii gt Weight is lower than 1 6 full scale 1 6 Weight Unit kg 1g 0 001 kg g 1g 1g Ib 1g 0 002204623 Ib Ib oz 1g 0 03527396 oz oz 1g 0 03527396 oz GN 1g 15 432358 GN viss 1g 0 000612viss ct 1g 5ct 02005324 9 ZSME300000255 EXCELL EXCELL PRECISION CO LTD Chapter 2 External Function Setting In the weighing mode press the NET GROSS and ON ZERO keys at the same time to enter the External Function setting mode The LCD sh
Download Pdf Manuals
Related Search