auraton 100 EN 04.cdr
Contents
1. AM PM simultaneously press MIN and SEC buttons PROGRAMMING The time switch may be programmed with maximum 8 programs Each setting is made individually To enter the programming mode proceed as follows 1 Press PROG button 2 The display will show the program number icon ON 1 and ON symbol It means that the time of switching on program 1 i is being set 3 Use WEEK button to set a day or days of the week in which this program is to be activated You may select each day individually the whole week working days weekend or every second day Use buttons HOUR MIN minutes SEC seconds to set precise time of program activation 4 Press PROG button The display will show l OFF next to the number of the program It means that that the time of program switching off is to be set Use buttons WEEK HOUR MIN minutes SEC seconds to set the time 5 When switching off time is set press PROG button to continue programming of the next program For the next program repeat the procedure described in paragraphs 2 4 above In order to exit the programming mode press CLOCK button or wait 10 seconds INACTIVATING A PROGRAM In order to delete a previously set program 1 Keep pressing PROG button until the display shows the number of program to be deleted with ON symbol next toit 2 Press Na button The display will show wS horizontal lines indicating 8 deleted2. and the clock will automatically add one hour to the displayed time In order to switch off DST function again press simultaneously HOUR and MIN buttons RESETTING THE DEVICE In order to reset the device press R button NOTE RESET of the device results in deleting all programs and returning it to factory default settings TECHNICAL SPECIFICATIONS Power supply 230VAC Load 16 Aresistive 6 Ainductive Operationaltemp 0 C 50 C Memory back up approx 1 week time NOTE When after a long inactivation period the display does not show the clock connect the device to power supply network for a few hours in order to charge the internal batteries
3. program AUTOMATIC OPERATION MODE The automatic operation mode of the time switch is used for switching ON OFF its output power supply for supplying any chosen device in accordance with previously defined programs Keep pressing Y button until the display shows the icon the automatic mode ON AUTO or AUTO OFF ON AUTO the device will switch on the power supply at the input the power supply will be switched off in accordance with the nearest programmed OFF time AUTO OFF the device will switch off the power supply at the input the power supply will be switched on in accordance with the nearest programmed ON time RANDOM OPERATION MODE The random operation mode may be used to simulate the presence of people inside the house flat In order to activate this mode press simultaneously WEEK and HOUR buttons The display will show the icon of random operation mode To switch off the random mode again press simultaneously WEEK and HOUR buttons MANUAL OPERATION MODE In order to permanently switch on the power supply at the device output keep pressing yy button until the display shows ON symbol In order to switch off the manual operation mode keep pressing D button until the display shows OFF symbol Daylight Saving Time DST In order to activate DST function which eliminates the need to adjust the clock press simultaneously HOUR and MIN buttons The display will show DST icon D
4. MULTIFUNCTIONAL WEEKLY TIME SWITCH PUIT 100 ser s Manual m 8 programs for switching ON OFF devices in one day and max 56 repeatable programs for switching ON OFF devices in one week with the set time accuracy of 1second m Easy programmable with buttons marked with recognizable symbols displayed on LCD screen m Function of random switching ON OFF m Function of manual switching ON OFF Red LED indicator for the output status The LED is activated when output signal is ON active Green LED indicator for indicating correct power supply of the time switch 230 V m Back up power supply to maintain the status of the display and saved programs after power supply failure or when the time switch is disconnected from its power supply source approx one week 12h weekdays fandom clock l mode mode AM MO WE Ag su clock a nn g LIIGU O OFF A AUTO OFF Daylight program Saving number Time ON activated DST OFF inactivated Caena Automatic opur osy ON mode OFF MO Monday FR Friday TU Tuesday SA Saturday WE Wednesday SU Sunday TH Thursday SETTING THE CLOCK In order to set the clock 1 Press and keep pressed CLOCK button 2 Then use the following buttons WEEK to set a weekday HOUR toset the hour MIN to set minutes SEC to set seconds Default setting of the clock operation is to display time in 24 hour mode To switch the clock into 12 hour mode
Download Pdf Manuals
Related Search