MV1000S parts_user V8.13
Contents
1. be defective to an authorized SMITH Reseller for verification of the claimed defect If the claimed defect is verified SMITH will repair or replace free of charge any defective parts and return of merchandise back to the customer freight collect If inspection of the equipment does not disclose any defect in material or workmanship repairs will be made at a reasonable charge which charges may include the costs of parts labor and transportation THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE SMITH s sole obligation and buyer s sole remedy for any breach of warranty shall be as set forth above The buyer agrees that no other remedy including but not limited to incidental or consequential damages for lost profits lost sales injury to person or property or any other incidental or consequential loss shall be available Any action for breach of warranty must be brought within two 2 years of the date of sale SMITH MAKES NO WARRANTY AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IN CONNECTION WITH ACCESSORIES EQUIPMENT MATERIALS OR COMPONENTS SOLD BUT NOT MANUFACTURED BY SMITH These items sold but not manufactured by SMITH such as electric motors switches hose etc are subject to the warranty if any of their manufacturer SMITH will provide pu2. no implied warranty of merchantability or of fitness for a particular purpose unless made in writing by an officer at SMITH s office This warranty does not cover and SMITH shall not be liable for general wear and tear or any malfunction damage or wear caused by faulty installation misapplication abrasion corrosion inadequate or improper maintenance negligence accident tampering or substitution of non SMITH component parts Nor shall SMITH be liable for malfunction damage or wear caused by the incompatibility of SMITH equipment with structures accessories equipment or materials not supplied by SMITH or the improper design manufacture installation operation or maintenance of structures accessories equipment or materials not supplied by SMITH This warranty does not apply in respect to damages to any product or accessory or attachment thereof caused by overloading or other misuse neglect or accident nor does this warranty apply to any product or accessory or attachment thereof which has been repaired or altered in any way which in the sole judgment of SMITH affects the performance stability or general purpose for which it was manufactured In the manufacture of buyer s equipment parts may be omitted or equivalent functioning equipment and components may be substituted for the original specified equipment upon the sole judgment and discretion of SMITH This warranty is conditioned upon the prepaid return of the equipment claimed to
3. previously manufactured before this manual It is the customer s responibility to complete the warranty card and mail it to the seller within 10 days from date of purchase If a failure occurs during the warranty period the customer must contact the seller to determine the appropriate action Any and all transportation charges are to be borne by the purchaser TROUBLESHOOTING I PROBLEM e Possible Reason s Solution s H MOTOR DOES NO START e No power cable or switch defective F MOTOR RUNS BUT NO SUCTION e Hose not connected or blocked H MOTOR RUNS W POOR SUCTION e Hose damaged e Filter blocked Top cover loose H DUST BLOWS FROM MOTOR e Filter loose or defective H ABNORMAL NOISE e Check motor s Fa MM1000S Dust collector An esea NOTE motor assembly must S see next pg Motor ass mbly be disconnected from filter A g a Filter shaker shaker before removing e a MV 1 014 HEPA filter MV 1 015 Filter seal ring i MV 1 016 Filter housing main body re X 5 6 MV 1 017 Main body seal ring MV 1 018 Main body ring 9 mv 1 020 Velcro belt MV 1 021 Dust bag MV 1 023 Debris tank MV 1 024 Dust bag cyclone MV 1 025 Dust bag holder MV 1 026 Cyclone seal ring MV 1 027 Cyclone ring MV 1 028 Cyclone head 20 Mv 1 031 1 Vac floor nozzle 214 v t o32 1 Vac small brush 22 Mv 1 033 Vac large brush a i ly rm SMITH Manu
4. smithmfg com warranty_activation php Thank you for purchasing a SMITH This machine was tested and passed inspection prior to shipping Please complete this form upon receipt of your equipment and prior to use on the job Failure to do so will void warranty All sections must be completed Should you have any questions please add to the comments section below Fax completed form to 954 545 0348 or email to cutters smithmfg com Do not contact SMITH for engine motor problems only machine warranty issues Motor Engine Warranty Contacts Honda http engines honda com dealer locator Subaru http robinamerica com dealerusacan aspx Leeson http www leeson com leeson servicecenter do invoke viewServiceCenterLocator Brook Crompton Motor http www brookcromptonna com contact html Weg Motors http www weg net us Contact Service Network Purchaser Details Organization Name Title Operators ee Phone Email Address City State Zip SMITH Machine MV1000S Machine Serial Date of Purchase Purchased from Pre Operation Inspection Please check all No parts or components on the machine appear damaged or lost in shipment Yes No All bolts fasteners hoses are in place and tightly secured wheels are operational Yes No Grease points have been identified for future maintenance requirements and appear lubricated Yes No Cutters and Drum Spindle Assembly are operational and secure on machi
5. ENT Once the dust bag has collected around 44lbs 20kg of material replace the bag to avoid lifting hazards caused by overfilling Follow the steps below for replacement e Switch the machine ON position you will notice the air is sucked from the plastic bag Loosen the belt holding the dust bag remove the dust bag from the body Attached a new bag tighten the belt using Velcro It is important to keep vacuum running during the bag changing process This will keep the flap in the collection cone closed ensuring no dust Will drop our from within the collection cone when bag replacement is being performed ORDERING To ensure product safety and reliability and to maintain your warranty always use genuine replacement parts from SMITH when making repairs to equipment When oredering please specify the model and serial number of the machine In addition give a part number description and quantity as listed on your parts list If you have any questions about the operation of your machine or would like to order replacement parts contact your SMITH Manufacturing representative directly Contact 1 800 653 9311 954 941 9744 for information Visit our website at www smithmfg com VERSION 8 2013 re SMITH Manufacturing 1 954 941 9744 www smithMfg com MV1000S Dust collector STORAGE The manufacturer reserves the right to change or improve the machine design without assuming any obligation to update any products
6. MTH Manufacturing 1 954 941 9744 www SmithMfg com 2 MVA 000S Dust collector Limited Equipment Warranty All statements technical information and recommendations contained in SMITH s literature are based on tests believed to be reliable but the accuracy or completeness thereof is not guaranteed and the following is made in lieu of all warranties expressed or implied SMITH warrants all equipment or part referenced in this document which is manufactured by SMITH and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser under normal use and maintenance as herein provided This warranty does not apply to components manufactured by others such as but not limited to bearings and engines such components that may or may not have their own warranties With the exception of any special extended or limited warranty published by SMITH SMITH will for a period of three months 90 days from the date of sale or up to five hundred 500 hours of use by buyer whichever shall occur first repair or replace any part of the equipment determined by SMITH to be defective This warranty applies only when the equipment or part is installed operated and maintained in accordance with SMITH s written recommendations SMITH s sole obligation for any breach of warranty or breach of contract for defects deliberate or accidental omissions shall be limited to repairing replacing or allowing credit fo
7. MV1000S Parts user Manual MANUFACTURING Cutters Removers Parts Support 1 800 653 9311 www SmithMfg com Phone 954 941 9744 Fax 954 545 0348 MVAI000S Dust collector INTRODUCTION Congratulations on purchasing the MV1000S Dust Collector from SMITH INDEX The MV1000S dust collector is a ruged powerful unit that is sure to meet your expectations for dust 6 Mainassemby control 89 MaintenanceLog See technical data below 10 Limited Equipment Warrant ave Voltage 220v 60Hz Single phase Mfg Company Warranty Activation 4050W 5 3HP Plastic dust bag 22x32in 550x800mm LDPE 75db A BEFORE START UP READ THIS Please read all operating instructions and be completely familiar with your equipment before operating When in doubt please contact SMITH Manufacturing Customer Service for operational details 2 re SMITH Manufacturing 1 954 941 9744 www SmithMfg com VERSION 8 2013 UNCRATING EQUIPMENT When you uncrate your equipment make certain that the machine has not been damaged and that all fasteners and guards are properly tightened Please check that the following accessories are included e Hoses Elbow Pipe Floor brush Floor nozzle Small brush Dust bag Velcro belt REMEMBER Only authorized experienced and properly trained personnel should operate this equipment Operating personnel should practice safety at all times and ear protective
8. facturing 1 954 941 9744 www SmithMfg com VERSION 8 2013 MV1000S MOTOR ASSEMBLY Dust collector NHN N9 Q e YY 7 I 7 i w i BSN i P i ma lt E i Pr l i C Ro m 10 T a P MV 1 002 Motor housing cover ae MV 1 003 6 Hex spacer long al MV 1 004 Motor rubber ring upper MV 1 005 Motor rubber ring middle MV 1 007 6 Hex spacer short 8 Mv 1 008 Plastic net 9 mv 1 009 Motor rubber ring lower MV 1 010 Motor table MV 1 011 6 flat washer MV 1 012 6 Hex head cap screw VERSION 8 2013 rr Suu Manufacturing 1 954 941 9744 www SmithMfg com 7 MVA 000S Dust collector MAINTENANCE LOG re SMITH Manufacturing 1 954 941 9744 www SmithMfg com VERSION 8 2013 MMVA 000S Dust collector MAINTENANCE LOG WARRANTY CLAIMS The manufacturer reserves the right to change or improve the machine design without assuming any obligation to update any products previously manufactured before this manual It is the customer s responsibility to complete the warranty card and mail it to the seller within 10 days from the date of purchase Ifa failure occurs during the warranty period the customer must contact the seller to determine the appropriate action Any and all transportation charges are to be borne by the purchaser VERSION 8 2013
9. gear gloves goggles safety vests ear plugs steel toe shoes etc VERSION 8 2013 MV1000S Dust collector SAFETY GUIDELINES Incorrect use of the dust collector can result in property damage personal injury or death Be sure to read and follow all directions and precautions as outlined in this manual Always wear personal safety equipment such as sturdy non slip boots ear protection dust mask and approved eye protection ePosition the vacuum in the working area Ensure dust collection bag is tightened by the velcro belt eCheck vacuum hose is fitted to inlet Ensure vacuum is set to OFF position prior to turning on power supply Plug vacuum into power supply and switch on power supply The machine should not be used in areas where potential for fire or explosions exist The machine should not be started without the dust bag attached eMake sure the cord is not pinched in doors fences or the like MTH Manufacturing 1 954 941 9744 www SmithMfg com 3 MVA000S neh ER ERER YOUR MV1000S DUST COLLECTOR Please take time to familiarize yourself with the MV1000S s controls as well as some of the features of your new machine ON OFF switch for auto filter shaking MUST BE ON DURING OPERATION 1 Vac motor switch 2 Vac motor switch Velcro belt to secure bag Cyclone separator assembly Dust bag 4 SMTH Manufacturing 1 954 941 9744 www SmithMfg com VERSION 8 2013 DUST BAG REPLACEM
10. hall be valid and enforceable to the fullest extent permitted by law Legal action buyer shall be responsible for all costs of collection of outstanding indebtedness including but not limited to attorney s fees and court costs to seller Buyer shall reimburse seller for any and all litigation expenses seller incurs as a result of an unsuccessful buyer claim The jurisdiction and venue of the court for any litigation state or federal brought by the buyer and or seller shall be located in venue determined by seller Fair labor standards seller s products are produced in the United States and in conformity with all applicable provisions of the fair labor standards act of 1938 as amended and any regulations and orders of the United States Department of Labor issued thereunder All written and visual data contained in this document reflects the most current product information available at the time of this publication SMITH reserves the right to make changes at any time without notice TO ORDER contact your SMITH distributor or call 1 800 653 9311 to identify the nearest distributor SMITH Manufacturing Co Inc 1610 South Dixie Highway Pompano Beach FL 33060 www smithmfg com re SMITH Manufacturing 1 954 941 9744 www SmithMfg com VERSION 8 2013 MNAI000S Dust collector Fastest amp Easiest Removal Solutions Since 1990 ce we __11 800 653 93 11 Pre Operation Inspection Warranty Activation Machine Registration Go to www
11. ne Yes No Motor has been started and in good working condition Yes No All Decals appear in place and securely attached Yes No Equipment runs and tested to assure all components are operating correctly Yes No Do you have a Wear Parts Kit with an Extra Cutter set in stock Yes No Did you join Remove Faster News for tech updates experience sharing and special offers Yes No 10 Comments OONDARWN Inspector s Signature Date Note To prevent downtime experienced users stock 1 machine wear parts kit with an extra cutter drum spindle assembly amp 1 cutter drum spindle rebuild kit after receipt Do you want to purchase and receive a special offer Yes No VERSION 8 2013 SMTH Manufacturing 1 954 941 9744 www SmithMfg com 1 SMITH MANUFACTURING Cutters Removers Parts Support SMITH Manufacturing 1610 South Dixie Highway Pompano Beach FL 33060 Toll Free 800 653 9311 Phone 954 941 9744 Fax 954 545 0348 Email info SmithMfg com www smithMfg com
12. r at SMITH s option any part which under normal and proper use and maintenance proves defective in material or workmanship within warranty period provided however that notice of any such defect or omission and satisfactory proof thereof is promptly given by buyer to SMITH and thereafter such defective part is returned to SMITH with transportation charges prepaid and SMITH s examination proves such part to have been defective This warranty does not obligate SMITH to bear any transportation charges or personnel time in connection with the replacement or repair of defective parts This warranty does not obligate SMITH to bear any expense for travel time or of personnel in connection with any service calls SMITH will not in any event be liable to the user for any consequential damages arising out of this sale for the loss of use lost profits or revenue interest lost goodwill or work stoppage SMITH shall not be liable for any injury loss or damage direct or consequential arising out of the use or the inability to use the product or for environmental claims It being understood that SMITH has no means of controlling the products final use therefore it shall be buyer s responsibility to determine suitability of product for intended use and buyer assumes all risks and liabilities whatsoever in connection therewith In no event shall SMITH be liable for consequential or special damages Used products are sold on an as is basis and there is
13. rchaser with reasonable assistance in making any claim for breach of these warranties In no event will SMITH be liable for indirect incidental special or consequential damages resulting from SMITH supplying equipment hereunder or the furnishing performance or use of any products or other goods sold hereto whether due to a breach of contract breach of warranty the negligence of SMITH or otherwise ADDITIONAL WARRANTY COVERAGE SMITH does provide extended warranty and wear warranty for products Corrections typographical or clerical errors contained herein are subject to correction by SMITH Assignment buyer shall not assign or transfer this warranty without SMITH s written consent Entire agreement and applicable law the rights and obligations of SMITH and buyer shall be governed by the laws of the state of Florida U S A In force on date hereof The provisions hereof are intended by buyer and SMITH as a final expression of their agreement and are intended also as a complete and exclusive statement of all terms apply cable to buyer s order No waiver modification or addition to any of the terms hereof shall be binding on SMITH unless made in writing by an officer at SMITH s office as stated herein In the event of conflict between buyer s purchase order and the terms hereof the latter shall control If any provisions herein are to any extent invalid or unenforceable the remainder of the warranty shall not be effected thereby and s
Download Pdf Manuals
Related Search