CZ302E - Clarion
Contents
1. n case of MP3 WMA the first track of the current folder will be played Other various play functions Scan play This function allows you to locate and play the first 10 seconds of all the tracks recorded on a disc Press the 1 button to perform scan play Repeat play This function allows you to play the current track repeatedly or play a track currently being played in the MP3 WMA folder repeatedly CD 1 Press the 2 button once or more until RPT ON appears on the LCD to perform repeat play USB Operations 1 Push the cap of the USB connector to the right Insert a USB cable CCA 755 into the USB connector Insert a USB device into the USB cable When connecting a USB device the unit will read the files automatically 2 To remove the USB device you should first select another source or turn off the power in order to avoid damaging the USB device Then take off the USB device Push the cap to the left 3 Operation is same as MP3 WMA operation iPod amp iPhone Operations 2 Press 2 button again to cancel repeat playback RPT OFF appears on the LCD MP3 WMA 1 Press the 2 button once or more until TRACK RPT appears on the display to perform repeat play and RPT segment lights on 2 For MP3 WMA files press 2 button repeatedly until FOLD RPT appears on the display for folder repeat play 3 Press 2 button repeatedly until RPT OFF appears on the dis2. Manually tuning a regional station in the same network This function is valid when the AF function is ON and the REG function is OFF Note This function can be used when a regional broadcast of the same network is received TA Traffic Announcement In the TA standby mode when a traffic announcement broadcast starts the traffic announcement broadcast is received as top priority regardless of the function mode so you can listen to it Traffic programme TP automatic tuning is also available This function can only be used when TP appears in the display When TP appears CD MP3 WMA Operations This unit can playback MP3 WMA files Notes If you play a WMA file with active DRM Digital Rights Management there will be no audio The WMA indicator blinks To disable DRM Digital Rights Management When using Windows Media Player 9 10 11 click on Tool gt Options gt Copy Music tab this means that the Radio Data System broadcast station being received has traffic announcement programmes Setting the TA standby mode If you press the TA button TA lights in the display and the unit is set into the TA standby mode until a traffic announcement is broadcast When a traffic announcement broadcast starts TRAF INF appears in the display If you press the TA button while a traffic announcement broadcast is being received the traffic announcement broadcast reception is can
3. 3 Before installation please fasten all power cables 4 DO NOT install the unit in the place where close to hot area to prevent damage to electrical components such as the laser head 5 Install the unit horizontally Installing the unit more than 30 degree vertically may result in worse performance 6 To prevent electric spark connect the positive pole first and then the negative pole 7 DO NOT block the cooling fan exit to ensure sufficient heating dissipation of this unit or it may result in damage to this unit Unit Installation Method 1 Insert mounting bracket into dash board choose appropriate mounting tab according to the gap width bending the mounting tab outwards with a screwdriver to fix the mounting bracket in place 2 Screw in 1 piece of M4x42 to the hole of the unit back and put on a rubber cap over the screw see picture below 3 Slide the unit into the bracket until you hear a click sound Screwdriver Dashboard Mounting Bracket Rubber cap Special Screw M4x42 CZ302E usibu3 12 usipu3 Method B Mounting Frame usos 1 Insert this unit directly to the opening of the dashboard 2 Place M5x6 cylindrical screw through the holes of the mounting frame located inside the opening to holes of the unit and fasten the screws to left amp right Trim Ring Installation Attach the trim ring around the front panel Disassemble trim ring 1 Push the trim
4. E 8 S D E Loan JE soem L 188mm 58mm Notes Specifications and design are subject to change without notice for further improvement CONTENTS 1 Before Starting 2 Package Contents 3 General Cautions 4 Cautions on Installation 5 Installing the Source Unit 6 Removing the Source Unit 7 Wiring and Connections 8 Connecting the accessories 1 Before Starting 1 This set is exclusively for use in cars with a negative ground 12 V power supply 2 Read these instructions carefully 3 Be sure to disconnect the battery terminal before starting This is to prevent short circuits during installation Figure 1 2 Package Contents Source unit Front panel Trim ring Mounting bracket Special screw M4x42 Rubber cap Screws M5x6 mm 3 General Cautions 1 Do not open the case There are no user serviceable parts inside If you drop anything into the unit during installation consult your dealer or an authorized Clarion service center Car battery Figure 1 Wire connector DCP case Owner s manual Warranty card Special screw Front panel lock lt sk sk lt hi 2 Use a soft dry cloth to clean the case Never use a rough cloth thinner benzine or alcohol etc For tough dirt apply a little cold or warm water to a soft cloth and wipe off the dirt gently 4 Cautions
5. can cause distortion discoloration which may result in a malfunction This system will not operate or may operate improperly with some Bluetooth audio players Clarion cannot guarantee the compatibility of all mobile phones together with unit Audio playback will be set to the same volume level as set during telephone call This might cause problems if extreme volume level is set during telephone call Handsfree Operations Pairing 1 Turn on Bluetooth function of your mobile phone 2 Enter mobile phone s Bluetooth setup menu 3 Search for new Bluetooth devices 4 Select CZ302E from the pairing list on the mobile phone 5 Enter 0000 as the password The password default setting is 0000 6 After pairing successfully the unit will enter Bluetooth mode automatically and CONNECTED will appear on the LCD 7 The unit can connect three units Making a call Operation from Bluetooth menu Press the SRC b button to switch the source to BLUETOOTH Press MENU 2 button to select a way to make outgoing call Dial Number 1 Press the MENU 7 button CZ302E 2 Rotate the VOLUME knob on the front panel to switch DIAL NUM 3 Press the VOLUME knob to confirm the selection 4 Rotate the VOLUME knob to select a number press the knob to confirm and ready to input the next digit Repeat the above until all numbers inputted 5 Press the VOLUME knob to dial 6 P
6. on Installation 1 Prepare all articles necessary for installing the source unit before your car dealer beforehand 4 Use the enclosed screws for starting installation 2 Install the unit within 30 of the Using other screws can cause horizontal plane Figure 2 damage 3 If you have to do any work on the car Figure 3 body such as drilling holes consult Chassis Chassis Max 30 j oE Figure 2 Figure 3 Max 6 mm M5 screw Pe LLL eee 5 Installing the Source Unit 1 Place the mounting bracket into the instrument panel use a screwdriver to bend each stopper of the mounting bracket inward then secure the stopper 2 Wire as shown in Section 7 3 Insert the source unit into the mounting bracket until it locks 4 Take care of the top and bottom of the trim ring and mount it so that all the hooks are locked Notes 1 Some car models require special mounting kits for proper installation Consult your Clarion dealer for details 2 Fasten the front stopper securely to prevent the source unit from coming loose Console opening dimensions 182 mm Hole 53 mm Notes of installation 1 Before installation please make sure proper connections are conducted and the unit operates normally Improper connection may result in damage to the unit 2 Use only accessories designed and manufactured for this unit and other unauthorized accessories may result in damage to the unit
7. or HIGH at AUX mode SELECT BT mode This SELECT menu is intended to automatically paired by selecting a mobile phone was stored This unit can store three mobile phones The mobile phone will be stored in paired order to the unit The mobile phone can be stored up to three The fourth mobile phone can not be stored If you want to store a fourth mobile phone please delete unwanted mobile phone from DELETE menu 1 Rotate the VOLUME knob to choose the pair mobile phone name from the pairing ist 2 Press and hold the VOLUME knob to confirm DELETE BT mode 1 Rotate the VOLUME knob to choose the paired mobile phone name from the pairing list 2 Press and hold the VOLUME knob to confirm DISCON BT mode Disconnect currently connected mobile phone 1 Rotate the VOLUME knob mobile phone displays are currently connected 2 Press and hold the VOLUME knob to disconnect CZ302E MIC SEL BT mode Rotate the VOLUME knob to choose Microphone EXTERNAL or INTERNAL MIC GAIN BT mode Rotate the VOLUME knob to choose Mic gain 5 4 3 2 1 0 1 2 3 4 5 You can change the gain of MIC when a telephone partner cannot hear your voice You can listen to your telephone calls from the speakers connected to this unit When listening to your calls on your car speakers you can adjust the volume by turning the VOLUME knob TONE SEL BT mode You can get mobile phone ring tone
8. played a little no sound part is caused between tunes Logical format File system 1 When writing MP3 WMA file on a CD R disc or CD RW disc please select SO9660 level 1 2 or Joliet or Apple ISO as the writing software format Normal play may not be possible if the disc is recorded on another format 2 The folder name and file name can be displayed as the title during MPS WMA play but the title must be within 32 single byte alphabetical letters and numerals including an extension 3 Do not affix a name to a file inside a folder having the same name Folder structure A disc with a folder having more than 8 hierarchical levels will be impossible Number of files or folders 1 Up to 999 files can be recognized per folder Up to 3000 files can be played 2 Tracks are played in the order that they were recorded onto a disc Tracks may not always be played in the order displayed on the PC 3 Some noise may occur depending on the type of encoder software used while recording Eject function Just pressing the amp button ejects the disc even if the power to the unit was not turned on Notes f you force a CD into before auto reloading this can damage the CD e Ifa CD 12 cm is left ejected for 15 seconds the CD is automatically reloaded Auto reload CD MPS WMA Operations Listening to a disc already loaded in the unit Press the SRC button to select the CD MP3 WMA mode Wh
9. the PS AS button 2 When a desired station is tuned in press the PS AS button again to continue receiving that station Note Becareful not to press and hold the PS AS button for 1 second or longer otherwise the auto store function is engaged and the unit starts storing stations Auto store Only stations with sufficient signal strength will be detected and stored in the memory Press and hold the PS AS button 1 sec to Radio Data System Operations Radio Data System This unit has a built in Badio Data System decoder system that supports broadcast stations transmitting Radio Data System data When using the Radio Data System function always set the radio to FM mode AF function The AF function switches to a different frequency on the same network in order to maintain optimum reception The factory default setting is ON 1 Set to system setup by long pressing DISP button start automatic station search To stop auto store press other buttons having radio functions Notes 1 After auto store the previous stored stations will be overwritten 2 The unit has 5 bands such as FM1 FM2 FM3 MW and LW FM3 MW and LW can store by AS function Each bands can Store 6 stations CZ302E can store 30 stations in total Manual store When one expected radio station has been detected press and hold number button 1 6 to store it in the memory Recall the stored stations Press one n
10. Aion Owner s manual amp Installation manual Mode d emploi et manuel d installation Benutzerhandbuch amp Installationshandbuch Manuale dell utente e manuale di installazione Gebruikershandleiding en installatiehandleiding Manual de instrucciones y de instalaci n Agar amp installationshandbok Instrukcja obstugi i instalacji Eyxeipidio Agitoupyiag amp Eykar cTaong CZ302E Bluetooth CD USB MP3 WMA RECEIVER LECTEUR Bluetooth CD USB MP3 WMA Bluetooth CD USB MP3 WMA RECEIVER RICEVITORE Bluetooth CD USB MP3 WMA Bluetooth CD MP3 WMA ONTVANGER RECEPTOR Bluetooth CD USB MP3 WMA Bluetooth CD USB MP3 WMA RECEIVER ODTWARZACZ Bluetooth CD USB MP3 WMA AEKTHZ Bluetooth CD USB MP3 WMA usiu3 CAUTIONS This appliance contains a laser system and is classified as a CLASS 1 LASER PRODUCT To use this model properly read this Owner s Manual carefully and keep this manual for your future reference In case of any trouble with this player please contact your nearest AUTHORIZED service station To prevent direct exposure to the laser beam do not try to open the enclosure USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER S MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE Denne meerking er anbragt udvendigt pa apparatet og indikerer at apparatet arbejder med laserstr ler af klasse 1 hvilket betyder at der anvendes laserstr ler af svageste klas
11. beginning of the next track 2 Each time the gt button is pressed playback proceeds to another track in the advancing direction Track down 1 Press the lt lt button to move to the beginning of the previous track 2 Each time the lt button is pressed playback proceeds to previous track in the reverse direction Note Playing order will depend on Bluetooth audio player When I lt button is pressed some A2DP devices will restart the current track depends on the duration of playback During music streaming playback A2DP and HFP will be shown on the display When A2DP device is disconnected DISCONNECT will be shown on the display and return to previously selected audio source Some Bluetooth audio players may not have play pause synchronized with this unit Please make sure both device and main unit are in the same play pause status in BT MUSIC mode ID3 display SCROLL ON OFF During music streaming playback for music information that is longer than the display panel When SCROLL is ON the LCD will display ID3 TAG information cyclely e g TRACK gt ALBUM gt TITLE gt ARTIST gt TRACK gt When SCROLL is OFF the LCD will display one of the ID3 TAG information the default is TRACK but user can adjust it to other ID3 TAG information by press DISP button 2 Turn the VOLUME knob to select AUX SENS 3 If the output level of connected external audio player is HIGH
12. can answer an incoming call by pressing the BAND 17 button Press the MENU 71 button to reject an incoming call Audio Streaming Operations What is audio streaming Audio streaming is a technique for transferring audio data such that it can be processed as a steady and continuous stream Users can stream music from their external audio player to their car stereo wirelessly and listen to the tracks through the car s speakers Please consult your nearest Clarion dealer for more information on the product of wireless audio streaming transmitter offered A CAUTION Please avoid operating your connected mobile phone while audio streaming as this may cause noise or sound choppy on the song playback Audio streaming may or may not resume after telephone interrupt as this is dependent on mobile phone System will always return to Radio mode if audio streaming is disconnected Note Be sure to read the chapter Pairing before proceeding Play Pause a track 1 Push the 4 button to pause audio playback 2 To resume audio playback push the 4 knob again AUX Operations Press SRC b button on the panel to select AUX AUX is just for audio content with 3 5mm Jack connector plugged into audio in socket on the front panel AUX Input sensitivity setting 1 Press and hold the DISP button 1 sec Selecting a track Track up 1 Press the gt button to move to the
13. celled and the unit goes into the TA standby mode Cancelling the TA standby mode As TA appears in the display press the TA button The TA in the display goes off and the TA standby mode is cancelled PTY Programme Type This function enables you to listen to a broadcast of the selected programme type even if the unit is on a function mode other than radio Some countries do not yet have PTY broadcast In the TA standby mode a TP station has priority over a PTY broadcast station Selecting PTY Press MENU 7 button then rotate the VOLUME knob to select PTY type press the VOLUME knob the unit begin searching then under Copy Settings unclick the check box for copy protected music Music Then reconstruct files Personally constructed WMA files are used at your own responsibility Precautions when creating MP3 WMA file Usable sampling rates and bit rates 1 MP3 Sampling rate 8 kHz 48 kHz Bit rate 8 kbps 320 kbps VBR 2 WMA Bit rate 8 kbps 320 kbps CZ302E 6 CD MP3 WMA Operations Precautions when creating MP3 WMA file Usable sampling rates and bit rates 1 MP3 Sampling rate 8 kHz 48 kHz Bit rate 8 kbps 320 kbps VBR 2 WMA Bit rate 8 kbps 320 kbps File extensions 1 Always add a file extension MP3 WMA to MP3 WMA file by using single byte letters If you add a file extension other than specified or forget to add the file extension the
14. ch models do not support this function iPod menu alphabet search This function searches the subfolders for desired alphabetical letters 1 Press the MENU c1 button to select the iPod menu mode 2 Press the VOLUME knob to switch between categories MUSIC PLAYLIST ARTISTS ALBUMS GENRES SONGS COMPOSERS VIDEO MOVIES MUSIC VIDEOS TV SHOWS VIDEO PODCASTS RENTALS 3 Press the VOLUME knob The contents of the category are displayed 4 Press and hold the DISP button 1 sec 5 Rotate the VOLUME knob to select the desired letter to search 6 Press the DISP button again to next perform search 7 Press the VOLUME knob to confirm CZ302E PSI 8 usipu3 Bluetooth Operations The Bluetooth allows you to utilize your car s built in audio system for wireless mobile phone or music handsfree communication Some Bluetooth mobile phones have the audio features and some portable audio players support Bluetooth feature This system can play audio data stored in a Bluetooth audio device The car stereo with Bluetooth will be able to retrieve phonebook contacts received call dialed call missed call incoming calls outgoing call and listen to music Note Donotleave the microphone of Bluetooth handsfree in the places with wind passing such as air outlet of the air conditioner etc This may cause a malfunction If leave it in the places subjected to direct sun high temperature
15. e to read the following cautions Do not allow any liquids on the unit from drinks umbrellas etc Doing so may damage the internal circuitry Do not disassemble or modify the unit in any way Doing so may result in damage Do not let cigarettes burn the display Doing so may damage or deform the body If a problem should occur have the unit inspected at your store of purchase Cleaning the body Use a soft dry cloth and gently wipe off the any dirt or dust For tough dirt apply some neutral detergent diluted in water to a soft cloth wipe off the dirt gently then wipe again with a dry cloth Do not use benzene thinner car cleaner etc as these substances may damage the body or cause the paint to peel Also leaving rubber or plastic products in contact with the body for long periods of time may cause stains USB Port The USB memory stick may stick out when inserted so it may cause danger during driving When connect USB memory stick to the main unit please use a USB extension cable CCA 755 The USB memory sticks must be recognized as USB mass storage class to work properly Some models may not operate correctly When the memorized data is lost or damaged by any chance Clarion shall not be liable for any damage When using an USB memory stick we recommend that you backup your data stored on it before using a personal computer etc Data files may be broken when using USB memory sticks in
16. e vehicle small light REAR S W Rotate the VOLUME knob to choose REAR or SUB WOOFER SW PHASE Rotate the VOLUME knob to choose SUBWOOFER phase REVERSE or NORMAL TEL SW Rotate the VOLUME knob to choose MUTE ON or OFF Audio Setup MUTE The sound from this unit is muted during telephone calls OFF This unit continues normal operation even when the cellular phone is used ON You can listen to your telephone calls from the speakers connected to this unit When listening to your calls on your car speakers you can adjust the volume by turning the VOLUME knob BEEP ON OFF Rotate the VOLUME knob to choose button beep sound ON or OFF RESET 1 Press and hold the VOLUME knob to reset 2 Settings will be set to the default value 3 The unit will be turned off automatically Note When the RESET is selected and you press and hold the VOLUME knob radio station frequencies titles and other data stored in memory are cleared Press the button to enter sound effect setting mode First press shows current EQ Rotate the VOLUME knob to changes BEAT EQ in this order OFF gt B BOOST gt IMPACT EXCITE gt CUSTOM Rotate the VOLUME knob to changes CUSTOM and press the VOLUME knob the press me or gt button to select it including BAS G gt BAS F gt BAS Q gt MID G gt MID F gt MID Q gt TRE G gt TRE F rotate the VOLUME knob to s
17. elect a value BAS G MID G TRE G 7 7 BAS F 50 100 200 BAS Q 0 7 1 1 4 2 MID F 500 1K 2K Radio Operations Select tuner as playing source Press SRC W button once or more to enter RADIO mode MID Q 0 7 1 1 4 2 TRE F 5k 10k 15k TRE Q 0 7 1 0 1 4 2 0 Press the P button then press I lt or gt gt button to select USER preset including BALANCE gt FADER gt M B EX gt LPF low pass filter gt S W VOL Subwoofer Volume rotate the VOLUME knob to select a value BALANCE LEFT 1 7 gt CENTER gt RIGHT 1 7 FADER FRONT 1 7 gt CENTER gt REAR 1 7 M BEX ON OFF LPF THROUGH 60 90 120 HPF THROUGH 60 90 120 SUBW VOL 6 6 Selecting the radio band Press the BAND button on the panel to select one radio band among FM1 FM2 FM3 MW and LW Radio Operations Manual tuning During manual tuning the frequency will be changed in steps Press the lt lt or gt gt button on the panel to select a higher lower station Auto tuning Press and hold the or gt button on the panel to seek a higher lower station To stop searching repeat the operation above or press other buttons having radio functions Note When a station is received searching stops and the station is played Preset scan Preset scan receives the stations stored in preset memory in order This function is useful when searching for a desired station in memory 1 Press
18. en the unit enters the CD MP3 WMA mode play starts automatically Loading a CD Insert a CD into the center of the CD SLOT with facing up The CD plays automatically after loading Notes Never insert foreign objects into the CD SLOT If the CD is not inserted easily there may be another CD in the mechanism or the unit may require service i Discs without the e225 mark and CD ROMs cannot be played by this unit Some CD R CD RW disc may not be usable Pausing play 1 Press the 4 button to pause play PAUSE appears in the display 2 To resume CD play press the 4 button again Displaying CD titles This unit can display title data for MP3 WMA disc When SCROLL is OFF each time you press the DISP button to change the title display MP3 WMA disc Track gt Folder gt File title gt Album gt Title gt Artist gt Track Notes If MPS WMA disc has no ID3 TAG NO TITLE appears in the display Only ASCII characters can be displayed in Tags Selecting a track Track up 1 Press the gt button to move ahead to the beginning of the next track 2 Each time you press the gt button the track advances ahead to the beginning of the next track 3 For MP3 WMA disc press and hold the 6 button 1 sec to move ahead to 10 tracks Track down 1 Press the i lt lt lt button to move back to the beginning of the current track 2 Pres
19. erly Use another device to connect The Bluetooth function of the device is not enabled Refer to the user manual of the device for how to enable the function The audio quality is poor after connection with a Bluetooth enabled device The internal microphone gain is not set correctly Adjust the gain of the internal microphone in System Setup The external microphone is not set correctly nor properly positioned 7 ERROR DISPLAYS If an error occurs one of the following displays is displayed Take the measures described below to solve the problem Display Disc is inserted incorrectly Adjust the gain and position of the external microphone For example stick the microphone onto the dashboard so it is close to the driver Measure Eject the disc then reload it properly The disc format is not supported Try another disc This is a failure of deck s mechanism Consult your store of purchase If an error display other than the ones described above appears press the RESET button If the problem persists turn off the power and consult your store of purchase When the RESET button is pressed preset radio stations titles etc stored in memory are kept czso2ze 10 usipu3 FM Tuner Frequency range 87 5 108 0MHz Usable sensitivity 8dBf Frequency response 30Hz 15kHz Stereo separation 30dB 1kHz Signal noise ratio 55dB MW Tuner Frequency
20. file cannot be played 2 Files without MP3 WMA data will not play The files will be played soundlessly if you attempt to play files without MP3 WMA data When VBR files are played the play time display may differ the play location When MP3 WMA files are played a little no sound part is caused between tunes This unit can play back MP3 WMA files Notes e If you play a WMA file with active DRM Digital Rights Management no audio is output The WMA indicator blinks To disable DRM Digital Rights Management When using Windows Media Player 9 10 11 click on Tool gt Options gt Copy Music tab then under Copy Settings unclick the Check box for Copy Protect Music Then reconstruct files Personally constructed WMA files are used at your own responsibility Precautions when creating MP3 WMA file Usable sampling rates and bit rates 1 MP3 Sampling rate 8 kHz 48 kHz Bit rate 8 kbps 320 kbps VBR 2 WMA Bit rate 8 kbps 320 kbps File extensions 1 Always add a file extension MP3 WMA to MP3 WMA file by using single byte letters If you add a file extension other CZ302E than specified or forget to add the file extension the file cannot be played 2 Files without MP3 WMA data will not play The files will be played soundlessly if you attempt to play files without MP3 WMA data When VBR files are played the play time display may differ the play location When MP3 WMA files are
21. from the speaker Rotate the VOLUME knob to choose AUTO or INTERNAL AUTO Mobile phone ring tone from the speaker INTERNAL The unit original ring tone from the speaker AUTO ANS BT mode To answer incoming calls automatically Rotate the VOLUME knob to choose AUTO ANS ON or OFF AUTO CON ON OFF BT mode Automatically connects the mobile phone was last connected Rotate the VOLUME knob to choose AUTO CON ON or OFF PIN CODE Rotate and press the VOLUME knob to choose a 4 digit password Press the VOLUME knob more than 1 seconds to confirm The PIN CODE default setting is 0000 SCRN SVR ON OFF Rotate the VOLUME knob to choose SCRN SVR screen saver ON or OFF SCROLL ON OFF For track information that is longer than the display panel When SCROLL is ON the LCD will display ID3 TAG information cyclely e g TRACK gt FOLDER gt FILE gt ALBUM gt TITLE gt ARTIST gt TRACK gt System Setup When SCROLL is OFF the LCD will display one of the ID3 TAG information the default is TRACK but user can adjust it to other ID3 TAG information by press DISP button S CTRL IPOD mode ON OFF Rotate the VOLUME knob to choose S CTRL Simple Control ON or OFF Beier to P8 DIMMER ON OFF Rotate the VOLUME knob to choose DIMMER ON or OFF ON LCD dimmer is active when small light of vehicle is turned ON OFF LCD always maximum brightness regardless of th
22. ge it by pressing on it with fingernails screwdrivers etc Operational Panel MIC BAND C MENU LC PS AS Disc Slot 2 USB connetor ROM masr Y FOLDER a 3 4 s g exe VOLUME DISP OPEN SRC 0 gt Names of Buttons TA AUX Jack 1 6 SRC Button Power Toggle the audio source BAND Button RADIO mode Select tuner band BT mode Dial Answer Transfer call Redial long press MENU 2 Button MP3 WMA mode Search function CD mode No function RADIO mode PTY select BT mode Terminate call AUX mode No function iPod mode iPod menu USB mode Search function Button Press to eject disc m4 Buttons Previous next track Search long press OPEN Button Unlock the front panel PS AS Button Scan play Preset scan Auto memory store long press p Button Sound effect setting VOLUME Knob Adjust volume level Confirm press TA Button Traffic announcement 1 6 Buttons 1 Button Scan play Preset station 1 2 Button Repeat play Preset station 2 3 Button Random play Preset station 3 4 Button Play Pause Top play long press Preset station 4 5 Button Previous folder Preset station 5 10 tracks down long press 6 Button Next folder Preset station 6 10 tracks up long press DISP Button Display switch Sys
23. l parts of the player and proper playback may not be possible If moisture forms on the disc wipe it off with a soft cloth If moisture forms on the optical parts of the player do not use the player for about one hour The condensation will disappear naturally allowing normal operation 2 Driving on extremely bumpy or rough roads can cause the disc to skip during playback 3 This unit uses precision parts and components for its operation In the event that trouble arises never open the case disassemble the unit or lubricate the rotating parts Contact your Clarion dealer or service center About the Registered Marks etc 1 Made for iPod and Made for iPhone mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards Please note that the use of this accessory with iPod or iPhone may affect wireless performance iPhone and iPod are trademarks of Apple Inc registered in the U S and other countries 2 The Bluetooth word mark and logos are owned by the Bluetooth SIG Inc and any use of such marks by Clarion Co Ltd is under license Other trademarks and trade names are those of their respective owners Front Panel Generalities For a longer service life be sur
24. nner to clean discs After using special disc cleaner let the disc dry off well before playing it On Discs Never turn off the power and remove the unit from the car with a disc loaded A CAUTION For your safety the driver should not insert or eject a disc while driving Basic Operations Note Refer to the diagrams in 3 CONTROLS when reading this chapter A CAUTION When the unit is turned on starting and stopping the engine with its volume raised to the maximum level may harm your hearing Be careful about adjusting the volume Power on off Notes Start the engine before using this unit Be careful about using this unit for a long time without running the engine If you drain the car s battery too far you may not be able to start the engine and this can reduce the service life of the battery Start the engine The power button knob illumination on the unit will light up Engine ON position Press the SRC button on the front panel to turn on the power under standby mode The unit goes back to the last status after power on Press and hold the SRC b button on the front panel to turn off the power CT Clock Time display The displayed clock data is based on the CT clock time data in the RDS signal Volume adjustment Turn the VOLUME knob on the front panel The adjustable range of volume is 0 to 40 A CAUTION While dri
25. ote On Blue with white stripe Front left White 6 Illumination Orange with white stripe Front left White with black stripe 7 ACC Red Rear left Green 8 Ground Black Rear left Green with black stripe Yellow Red For VW and Audi Change wiring like above 8 Connecting the accessories Connecting to the external amplifier External amplifiers can be connected to the 4 channel RCA output connections Ensure that the connectors are not grounded or shorted to prevent damage to the unit CZ302E PSI 14 C English Declaration of conformity We Clarion declares that this model CZ302E is following the provision of Directive 1999 5 EC with the essential requirements and the other relevant regulations Fran ais D claration de conformit Nous Clarion d clarons que ce mod le CZ302E est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999 5 CE Deutsch Konformitatserklarung Wir Clarion erklaren dass dieses Modell CZ302E den Bestimmungen der Richtlinie 1999 5 EG im Hinblick auf die grundlegenden Anforderungen und andere relevante Bestimmungen entspricht Italiano Dichiarazione di conformit Clarion dichiara che il presente modello CZ302bE conforme ai requisiti essenziali e alle altre disposizioni pertinenti stabiliti dalla direttiva 1999 5 CE Nederlands Conformiteitsverklaring Clarion verklaart da
26. play to cancel repeat playback and RPT segment goes off Random play This function allows you to play all tracks recorded on a disc in a random order Press the 3 button to perform random play Random function activates when jumping to another track CCA 755 Connect Connect an iPod or iPhone to the USB connector via CCA 748 cable When connecting a device the unit will read the files automatically The track information display on the screen once playback start MENU In the S CTRL OFF mode press MENU 7 button rotate the VOLUME knob select MUSIC or VIDEO Select MUSIC press the VVOLUME knob then rotate the VVOLUME knob to show PLAY LISTS ARTISTS ALBUMS iPod amp iPhone Operations GENRES SONGS COMPOSERS press and rotate the VOLUME knob to select a desired option then press the VOLUME knob to confirm Select VIDEO press the VOLUME knob then rotate the VOLUME knob to show MOVIES MUSIC VIDEOS TV SHOWS VIDEO PODCASTS RENTALS press and rotate the VOLUME knob to select a desired option then press the VOLUME knob to confirm NOTE VIDEO MENU item is different by the model of connected iPod and language setting Repeat play This function allows you to play the current track repeatedly or play all tracks in your iPod iPhone repeatedly 1 Press the 2 button once or more until RPT ON appears on the LCD to perform repeat pla
27. range 531 1602kHz Usable sensitivity S N 20dB 30dBu LW Tuner Frequency range 153 279kHz Usable sensitivity S N 20dB 34dBy CD Player System Disc digital audio system Frequency response 20Hz 20kHz Signal noise ratio gt 94dB Total harmonic distortion Less than 0 1 1kHz Channel separation gt 60dB MP3 WMA mode MP3 sampling rate 8 kHz to 48 kHz MP3 bit rate 8 kbps to 320 kbps VBR WMA bit rate 8 kbps to 320 kbps Logical format ISO9660 level 1 2 Joliet file system USB Specification USB 1 0 2 0 Playable audio format MP3 mp3 MPEG 1 2 Audio Layer 3 WMA wma Ver 7 8 9 1 9 2 Bluetooth Specification Bluetooth Ver 2 0 EDR Profile HFP Hands free Profile PBAP Phone Book Access Profile A2DP Advanced Audio Distribution Profile 11 czs02e AVRCP AV Remote Control Profile Send Receive Sensitivity Class 2 Audio Amplifier Maximum power output 180W 45W x 4 Speaker impedance 49 4 to 8Q allowable Input Audio input sensitivity High 320mV at 1V output Mid 650mV at 1V output Low 1 3V at 1V output input impedance 10 ko or greater Aux in level lt 2V General Power supply voltage 14 4VDC 10 8 to 15 6V allowable negative ground Pre Amp output voltage 2 0V CD play mode 1kHz 0dB 10kQ load Fuse 15A Dimensions of the Main Unit 188mm Width x 58mm Height x 190mm Depth Weight of the Main Unit 1 35kg A 178mm 50mm
28. ress MENU 21 to terminate call Dialled Missed Received You can search any Dialled Missed Received User pbk 1 Rotate the VOLUME knob to select DIALLED MISSED RECEIVED 2 Press the VOLUME knob to enter the selected call history 3 Rotate the VOLUME knob to scroll the contacts 4 When the contact name or mobile phone No is displayed press the VOLUME knob to call the mobile phone No of that contact Press the MENU 71 button to end the call Call from Phonebook User can search the contact name in the phonebook and make call 1 Rotate the VOLUME knob to select USER PBK 2 Press the VOLUME knob to enter the selected phonebook 3 Rotate the VOLUME knob to scroll the contacts 4 The phone number and the name to scrool display When the contact name is displayed press the VOLUME knob to call the mobile phone No of that contact Press the MENU 7 button to end the call Note Some mobile phones may not be able to transfer data of Phonebook After RESET please wait few minutes until data transferred following to the Bluetooth mode selection During that PBK UPDATE is on the display Redial You can call last dialed number Press and hold the BAND ic button 1sec Bluetooth Operations Transfer Call You can switch Handsfree call and mobile phone call Press the BAND ic button during call Answering a call You
29. ring to right and pull out the Jhemp Top 4 jp Bottom 13 czs02E 6 Removing the Source Unit right part 2 Push the trim ring to left and pull out the left part Disassemble the unit 1 Switch off the power 2 Remove the panel 3 Remove the trim ring 4 Insert the removal keys straight back until they lock then pull the unit out 5 Disconnect all the wires 7 Wiring and Connections Black Black Black ante Rear audio output Left Tino nn Subwoofer output 1 Red H Rear audio output Right External microphone RCB 199 Sold by separately Black Steering wheel Subwoofer output 2 control terminal UC Giay H Left Front audio Right output terminal Antenna Black Refer to next page Rear right Front right Front left Rear left AMP Remote ACC Ground c Rear right Front right Front leit Rear left Illumination Phone Mute attery Locati Function EE Connector A Connector B 1 Phone Mute Brown Rear right Purple 2 Rear right Purple with black stripe 3 Front right Grey 4 Battery 12V Yellow Front right Grey with black stripe 5 Rem
30. rotate VOLUME knob and choose LOW And if the output level is LOW choose HIGH GENERAL Problem Unit can not power on Unit fuse blown Measure Replace with new fuse of correct rating USB Devices USB device cannot be inserted The USB device has been inserted with wrong direction Measure Reversing the connection direction of the USB device try it again IPSIS The USB connector is broken Replace with a new USB device Car battery fuse blown Replace with new fuse of correct rating The USB device is damaged Connectors are loose Disconnect the USB device and reconnect If the device is still not recognized try replacing with a different USB device Unit can not power on Nothing happens when buttons are pressed Display is not accurate The microprocessor has malfunctioned due to noise etc Turn off the power and remove the DCP Press the RESET button with a thin rod Note When the RESET button is pressed turn off the ACC power When the RESET button is pressed preset radio stations titles etc stored in memory are kept the display No File shown No MP3 WMA file is stored in the USB device Store these files properly in the USB device No low audio output Improper audio output connection Check wiring and correct Volume set too low Increase volume level Speakers damaged Replace speaker
31. s Heavily biased volume balance Adjust the channel balance to center position Speaker wiring is in contact with metal part of car Insulate all speaker wiring connections Poor sound quality or distortion Non standard disc used Use a standard disc Speaker power rating does not match unit Replace speakers Wrong connections Check wiring and correct Speaker is shorted Check wiring and correct MUTE wire is grounded Check the MUTE wiring and correct Unit resets itself when engine is off DISC Player Disc cannot be loaded Incorrect connection between ACC and Battery Another disc is already loaded Check wiring and correct Measure Eject the disc before loading the new one There is an object installed inside the unit Remove the object inside the unit Sound skips or is noisy Compact disc is dirty Clean the compact disc with a soft cloth Compact disc is heavily scratched or warped Replace with a compact disc with no scratches Sound is bad when power is first turned on lens when the car is parked in a humid place Condensation may form on the internal Let dry for about 1 hour with power on Sound skips or is device with the car laudio system MP3 WMA files are not encoded properly The device does not support the profiles required for the system Use MP3 WMA files encoded prop
32. s etc Front Panel Generalities Remove the DCP Attach the DCP Storing the DCP in the DCP Case Operational Pane Names of Buttons PWWWWWWNHNNHNNN Handling Discs System Setup Audio Setup Radio Operations Radio Data System Operations CD MP3 WMA Operations USB Operations iPod amp iPhone Operations Bluetooth Operations AUX Operations cO C C O O Q Q Q gt W Built in Parrot Bluetooth Handsfree HFP and Audio Streaming A2DP amp AVRCP E Compatible with iPod iPhone via USB W 4ch RCA Output with HPF LPF and BEAT EQ with 3 Band Parametric Equalizer HIER RDS Q Bluetooth p UN DIGITAL AUDIO Expanding Systems Expanding audio features 4 Channel Amplifier lt USB Memory Connect via CCA 755 ON iPod iPhone Connect via CCA 748 Portable Player Connect via AUX IN Jack Bluetooth cellular phone Note The items listed outside of the frames are the commercial products generally sold CCA 748 and CCA 755 Sold by separately For your safety the driver should not operate the controls while driving Also while driving keep the volume to a level at which external sounds can be heard 1 When the interior of the car is very cold and the player is used soon after switching on the heater moisture may form on the disc or the optica
33. s the lt lt button twice to move back to the beginning of the previous track 3 For MP3 WMA disc press and hold the 5 button 1 sec to move back to 10 tracks Fast forward Fast reverse Fast forward Press and hold the 1 button Fast reverse Press and hold the kea button For MP3 WMA discs it takes some time until the start of searching and between tracks In addition some errors may occur in the play time Folder Select This function allows you to select a folder containing MP3 WMA files and start playing from the first track in the folder 1 Press the 5 or 6 button Press the 6 button to move the next older Press the 5 button to move the previous folder 2 To select a track press the H or button Search Function 1 Press the MENU 2 button to enter FOLD SCH mode Press the VOLUME button to enter the folder list search mode 2 Turn the VOLUME knob to select a folder 3 Press the VOLUME button to enter the ile list search mode And then the track ist appears in the display 4 Turn the VOLUME knob to select a track 5 Press the VOLUME knob to play When play back MP3 WMA file this unction is performed in the current folder CD MP3 WMA Operations Top function The top function resets the CD player to the first track of the disc Press and hold the 4 button 1 sec to play the first track track No 1 on the disc
34. se og at man ikke pa apparatets yderside kan blive udsat for utilladelig kraftig str ling APPARATET BOR KUN BNES AF FAGFOLK MED S ERLIGT KENDSKAB TIL APPARATER MED LASERSTRALER Indvendigt i apparatet er anbragt den her gengivne advarselsmaekning som advarer imod at foretage s danne indgreb i apparatet at man kan komme til at udsaeette sig for laserstr ling CZ302E Apparaten inneh ller laserkomponenten som avger laserstr lning verstigande gr nsen for laserklass 1 Suojakoteloa si saa avata Laite sis laserdiodin joka l hett n kym t nt silmille vaarallista lasersateilya o won CZ302E clarion 12V GROUND MW 531 1602kHz LENS GROUND 15A max rM sign J G 2200 LW 153279kHz 557 CLASS 1 LASER PRODUCT This product includes technology Microsoft Corporation and cannot be used or detrbuted nou a Beense from MSLGP QDID NO 8017789 p Contents Thank you for purchasing this Clarion product Please fully read this owner s manual before operating this equipment Check the contents of the enclosed warranty card and store it in a safe place with this manual 1 2 COND CONTROLS CAUTIONS ON HANDLING OPERATIONS TROUBLE SHOOTING ERROR DISPLAYS SPECIFICATIONS S INSTALLATION WIRE CONNECTION GUIDE seen 11 Contents FEATURES Expanding Systems PRECAUTIONS About the Registered Mark
35. t het model CZ302E in overeenstemming is met de essenti le eisen en andere relevante voorschriften van de bepalingen van Richtlijn 1999 5 EC Espa ol Declaraci n de conformidad Clarion declara que este modelo CZ302E cumple con los requisitos esenciales y otras disposiciones aplicables descritos en la Directiva 1999 5 CE Svenska Intyg om verensst mmelse H rmed intygar Clarion att denna modell CZ302E uppfyller kraven i direktiv 1999 5 EG g llande v sentliga egenskaper och vriga relevanta best mmelser Polski Deklaracja zgodno ci Firma Clarion niniejszym o wiadcza e model CZ302E jest zgodny z istotnymi wymogami oraz innymi odpowiednimi postanowieniami Dyrektywy 1999 5 WE EAAnvika Arlon cuup pouong Epei otnv Clarion nAdvoupe on aur ro povr Ao CZ302E tnpei ric iat gei Tri O ny ag 1999 5 EK OXETIKd HE TIG OUGIWSEIC ATAIT OEI KAI TOU GAAOUG OXETIKOUG KAVOVIOO Clarion Europe S A S Z I du Pr Varois Route de Pompey 54670 Custines FRANCE Clarion Co Ltd All Rights Reserved Copyright 2012 Clarion Co Ltd Printed in China Imprim en Chine Gedruckt in China Stampato in Cina Gedrukt in China Impreso en China Tryckt i Kina Wydrukowano w Chinach Ektupix amp nxe stnv Kiva PN 127075003930
36. tem setup long press MIC Hole Internal microphone Handling Discs Handling New discs may have some roughness around the edges If such discs are used the player may not work or the sound may skip Use a pen or similar tool to remove any roughness from the edge of the disc Ball point pen Roughness Never stick labels on the surface of the disc or mark the surface with a pencil or pen Never play a disc with any cellophane tape or other glue on it or with peeling off marks If you try to play such a disc you may not be able to get it back out of the player or it may damage the player Do not use discs that have large scratches are misshapen cracked etc Use of such discs may cause misoperation or damage To remove a disc from its storage case press down on the center of the case and lift the disc out holding it carefully by the edges Do not use commercially available disc protection sheets or discs equipped with stabilizers etc These may damage the disc or cause breakdown of the internal mechanism Storage Do not expose discs to direct sunlight or any heat source Do not expose discs to excess humidity or dust Do not expose discs to direct heat from heaters Cleaning To remove fingermarks and dust use a soft cloth and wipe in a straight line from the center of the disc to the outer edge Do not use any solvents such as commercially available cleaners anti static spray or thi
37. the following situation When disconnecting the USB memory stick or turnin ihe power off during reading data When affected static electricity or electric noise Connect disconnect the USB memory stick when it is not accessed Connecting with the computer is not covered CZ302E 2 usipu3 Remove the DCP The control panel can be detached to prevent theft When detaching the control panel keep it in the safety place and prevent scratches We recommend taking the DCP DETACHABLE CONTROL PANEL with you when leaving the car 1 Press the SRC button 1 sec to turn off the power 2 Deeply push in OPEN button to unlock the DCP 3 Hold the side popped out remove the DCP Attach the DCP 1 Hold the DCP and ensure that the panel faces towards you Set the right side of the DCP into the DCP bracket 2 Press the left side of the DCP until it locks Storing the DCP in the DCP Case Hold the DCP as shown in the figure below and put it into the supplied DCP case DCP DCP case Note If the DCP is dirty wipe off the dirt with a soft dry cloth only CZ302E A CAUTION The DCP can easily be damaged by shocks After removing it be carefully not to drop it or subject it to strong shocks Once the OPEN button is pressed and DCP is unlocked car vibrations can cause the DCP to fall The connector for the main unit and DCP is extremely important Be careful not to dama
38. umeric button among 1 to 6 on the panel to select the corresponding stored station Local seeking When LOCAL seeking is ON only those radio stations with strong radio signal could be received Select LOCAL function press and hold the DISP button on the front panel then press gt button repeatedly until LO or DX displays on the screen and rotate the VOLUME knob to select Local or Distant mode Note The number of radio stations that can be received will decrease after the local seeking mode is ON 2 Press the I lt or gt button to select AF 3 Rotate the knob to select ON or OFF ON AF indicator appears in the display and AF function turns on OFF AF indicator disappears in the display and AF function turns off REG Regional programme function When the REG function is ON the optimum regional station can be received When this Radio Data System Operations function is OFF if the regional station area Switches as you drive a regional station for that region is received The factory default setting is ON Notes This function is disabled when a national station such as BBC R2 is being received The REG function ON OFF setting is valid when the AF function is ON 1 Set to system setup by long pressing DISP button 2 Press the lt lt or 1 button to select REG 3 Rotate the VOLUME knob to select ON or OFF
39. ving keep the volume level at which external sounds can still be heard Playing source selection Press SRC b button on the front panel repeatedly to choose desired playing source Notes Playing source selection means selecting which mode such as DISC mode RADIO mode AUX mode and BT mode Display system time Press the DISP button on the front panel to switch the display information from clock station information RADIO mode or track information CD mode RESET If you have below problems pls press RESET button Unit can not power on Nothing happens when buttons are pressed Display is not accurate Note When the RESET button is pressed preset radio stations audio setting etc stored in memory are kept RESET CZ302E PSI 4 System Setup n any mode press and hold DISP button to enter system setup Press ke or gt button to select options rotate the VOLUME knob to adjust AF ON OFF RADIO mode Rotate the VOLUME knob to choose AF ON or OFF REG ON OFF RADIO mode Rotate the VOLUME knob to choose REG ON or OFF DX LO RADIO mode Rotate the VOLUME knob to choose radio local or distant at radio mode LO Only stations with strong signal can be received DX Stations with strong and weak signals can be received AUX SENS AUX mode Rotate the VOLUME knob to choose AUX Input sensitivity LOW MID
40. y 2 Press 2 button repeatedly until RPT OFF appears on the LCD to cancel repeat playback Random play This function allows you to play all tracks recorded on a disc in a random order 1 Press 3 button repeatedly until ALBUM RDM appears on the LCD for album random play 2 Press the 3 button once or more until SONG RDM appears on the LCD to perform random play 3 Press 3 button repeatedly until RDM OFF appears on the LCD to cancel random playback Setting iPod simple control mode Use this function if you wish to operate through your iPod connected to this unit via the USB cable The factory default setting is OFF 1 Press and hold DISP button to enter system setup 2 Press 1 or gt gt button to select S CTRL 3 Rotate the VOLUME knob to select ON or OFF ON Operations are made through your iPod OFF Operations cannot be made through your iPod to monitor CCA 748 Notes When performing iPod operations using simple control mode make the operations slowly If repetitive operations are performed too quickly unforeseen errors may occur When performing iPod operations using simple control mode please do not operate the iPod and the unit at the same time otherwise there may be unexpected event happened Some iPod models do not support this function Consult your nearest Clarion dealer or website to confirm whi
Download Pdf Manuals
Related Search