Home

NC Data Communicator User`s Guide Ver. 1.01

image

Contents

1. 41 42 43 44 45 46 47 48 49 Directory Pass Name DIR1 Directory Pass Name DIR2 Directory Pass Name DIR3 Directory Pass Name DIR4 Directory Pass Name DIR5 Directory Pass Name DIR6 Directory Pass Name DIR7 Directory Pass Name DIR8 Directory Pass Name DIR9 DAT DATA1 DAT DATA2 DAT DATA3 DAT DATA4 DAT DATA5 DAT DATA6 DAT DATA7 DAT DATA8 DAT DATA9 Pass name of Directory 1 Pass name of Directory 2 Pass name of Directory 3 Pass name of Directory 4 Pass name of Directory 5 Pass name of Directory 6 Pass name of Directory 7 Pass name of Directory 8 Pass name of Directory 9 gt Please refer 7 Parameter for parameter settings No NC Data file in the directory If the directory does NOT have a data file which has the same extension as the one set by parameter 21 the LCD will display Not Found Display Ex 1 10 20 Characters 1 OUT SEL 2 DATA 1I Not Found 3 4 Attention D VI can tell the difference between capital and small letter of the extension For example if parameter 21 is set as DAT LCD does not display the files have the extension dat and will say Not Found instead The files should have the same extension to be displayed In this manual Directory is the same as Folder in Windows 5 Communication Protocol The Communication Protocol for data communication with NC machin
2. Please refer to 7 5 Directory Path Settings on how to format these settings After setting up these parameters please go to Directory Selecting mode Then choose the DIR number of the USB memory sub directory for Read Write 2 Settings for PCs which D VI connects to D VI uses Guest Connections to connect to a Network Drive D VI needs to be set to Guest Connection on any system which can supply Network Drives such as CAD CAM systems or PCs D VI does not have an authorization function because of its limitations We strongly recommend that you select the folders you want to share to prevent issues with security If you have any question about guest connections and sharing folders please refer a manual for your system or ask your system vendor 3 Incase D VI can NOT connect to a network drive D VI tries to connect to the network drive when the DIR number which was set to the network drive in the Directory Selection mode is selected On selection a timeout error will occur if there is a parameter description error wiring error or a problem with the communication channel D VI will display Not Found In this case it is not an alarm Timeout is about 1minute however it depends on your network environment 10 3 Share Folder D VI shares the store directory for NC data file on an internal flash disk as well as the parameter file This parameter which is shared with the network is called Share Folder o
3. Type File Name directly gt Confirm File START Processing the data output lt Done gt Press RESET OUT Mode File Selection Mode 2 Process OUT Select Function Press Gi display File Selection Mode Select Data File Use the cursor keys to select a file gt 6 Press to display the file name which has over 9 characters and 4 press to go back to the first line of the file name list on the display And select ALL at the bottom of the list to select the all data in the shown directory lt Display gt 1 10 20 Characters 1 OUT SEL gt DATAOOOS 2 DATA 1 DATAOOO6 3 F 6 DATAOOO7 4 R 216 3M ALL Manually typing the filename To type filename directly press the key for Direct Typing mode Please refer 4 Supplement of Data Input for Direct Typing dada Note If the typed file name cannot be found D VI displays Not found aa To go back to File Selection Mode please press Filtering Filter the file names to display only specified files whose name begins with same keyword characters Please refer 3 5 Display Files Change Directory The LCD will display the Directory name which is currently selected max 10 characters To change Directory press and select the desired directory with the numeric keypad LI DIR Number 0 For USB Memory Stick 1 9 Directories for data DIR1 DIR9 lt Display gt 1 10 20 Characters
4. Directory Name DIR5 DATA 5 DATA 5 DATA 5 DATA 5 DATA 5 Directory Name DIR6 DATA 6 DATA 6 DATA 6 DATA 6 DATA 6 Directory Name DIR7 DATA 7 DATA 7 DATA 7 DATA 7 DATA 7 Directory Name DIR8 DATA 8 DATA 8 DATA 8 DATA 8 DATA 8 Directory Name DIR9 DATA 9 DATA 9 DATA 9 DATA 9 DATA 9 Spare DAT DATAI Directory pass Name DIR1 Directory pass Name DIR2 Directory pass Name DIR3 Directory pass Name DIR4 Directory pass Name DIR5 Directory pass Name DIR6 DAT DATA6 DAT DATAI DAT DATA5 DAT DATA5 DAT DATA5 DAT DATA6 DAT DATAI DAT DATAI DAT DATAI DAT DATAS DAT DATA6 DAT DATAS DAT DATA6 DAT DATA6 Directory pass Name DIR7 DAT DATA7 DAT DATA7 DAT DATA7 DAT DATA7 DAT DATA7 Directory pass Name DIR8 DAT DATA8 DAT DATA8 DAT DATA8 DAT DATA8 DAT DATA8 Directory pass Name DIRQ DAT DATA9 DAT DATA9 DAT DATA9 DAT DATA9 Spare Communication Protocol MZ command response mode MZ Parity MZ command response delay MZ command response time out Display network settings Method to set IP Address 1 DHCP 1 DHCP 1 DHCP 1 DHCP 5 IP Address 192 168 0 100 8 59 Subnet mask 255 255 255 0 255 255 2550 255 255 2550 255 255 2550 255 255 255 0 RE WE NEE E S e 192 168 0 100 192 168 0 100 192 168 0 100 192 168 0 100 61 ___ Name Server Oooo EEE T k 7
5. 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 Directory Name DIR1 Directory Name DIR2 Directory Name DIR3 Directory Name DIR4 Directory Name DIR5 Directory Name DIR6 Directory Name DIR7 Directory Name DIR8 Directory Name DIR9 Spare Directory pass Name Directory pass Name Directory pass Name Directory pass Name Directory pass Name Directory pass Name Directory pass Name Directory pass Name Directory pass Name Spare DIR1 DIR2 DIR3 DIR4 DIR5 DIR6 DIR7 DIR8 DIRQ Communication Protocol MZ command response mode MZ parity Nickname of drive 1 to find with DIR key Actual name of drive directory is set at parameter 41 Nickname of drive 2 to find with DIR key Actual name of drive directory is set at parameter 42 Nickname of drive 3 to find with DIR key Actual name of drive directory is set at parameter 43 Nickname of drive 4 to find with DIR key Actual name of drive directory is set at parameter 44 Nickname of drive 5 to find with DIR key Actual name of drive directory is set at parameter 45 Nickname of drive 6 to find with DIR key Actual name of drive directory is set at parameter 46 Nickname of drive 7 to find with DIR key Actual name of drive directory is set at parameter 4
6. fig Desktop Please follow the wizard of Add a network Place Add Network Place Wizard Welcome to the Add Network Place Wizard This wizard helps you sign up for a service that offers online storage space You can use this space to store organize and share your documents and pictures using only a Web browser and Intemet connection You can also use this wizard to create a shortcut to a Web site an FTP site or other network location To continue click Next O Note The method we introduced at In case the sharing folder does not show up on My Network is the function of Microsoft Windows not D VI Please refer the manual of Microsoft Windows or ask Microsoft if you have any questions 11 Web Settings by Web Browser D Ws network settings may be configured via a Web browser Parameter settings may also be set in this way It is easier to set because an explanation of each parameter is shown next to each parameter number 1 Valid Browser There are no specific browsers for use with D VI because the Web Setup does not use JavaScript Java Applet or Adobe FLASH Text based browsers such as Lynx and w3m may also be used However it may be possible that the layout will be out of order 2 Valid Items to set These following items may be set on via Web Setup Network Settings for D VI Parameter Settings Time Settings Restart 3 IP address of D VI If the IP address of D VI is unkn
7. 22 23 24 Percentage of Communication Delay Invalid D W will ignore if this parameter regardless if it is changed lt Parameter type gt Numerical Value lt Maximum character amount gt 13 Characters lt Range gt Random lt Default gt 50 File Extension Extension of data file D VI distinguishes between capital and small letters lt Parameter type gt Character line lt Maximum character amount gt 3 Characters lt Range gt Random lt Default gt DAT capital letter Keyword for Subprogram Execution Keyword for calling a file from the main program Choose M98P Prefix keyword ex O or free word lt Parameter type gt Character line lt Maximum character amount gt 13 Characters lt Range gt Random lt Default gt M98P O O as prefix keyword When parameter number 22 is set M98P Prefix a Sub Program is able to be called repeatedly by specifying Separator character and number of times ex M98P O L Push LYZ J once and 6times to put and Push LST once and twice to put Ignore DSR Ignore DSR from the NC machine during data input output lt Parameter type gt Numerical Value lt Maximum character amount gt 13 Characters lt Range gt 0 1 0 Error with DSR L 1 Ignore DSR lt Default gt 1 Wait for DC3 to finish output Finish outputting data after receiving DC3 code lt Parameter type gt Numerical Value lt Maximum character
8. 2 DATA 1 DATAOOO6 3 DATAOOO7 4 ALL gt Manually typing the File Name To type filename directly press the key for Direct Typing mode Please refer 4 Supplement of Data Input for Direct Typing dada gt Filtering Filter the file names to display only specified files whose name begins with same keyword characters Please refer 3 5 Display Files gt Change Directory LCD will display the Directory name which is currently selected Max 10 characters To change Directory press and select a directory with the numeric keypad DIR Number 0 For USB Memory Stick 1 9 Directories for data DIR1 DIR9 Select Target File Use cursor key to select target file Same way as 2 Select Original File lt Display gt 1 10 20 Characters 1 COPY SEL2 gt DATAOOOS 2 DATA 1 DATAOOO6 3 DATA 1 DATAOOO7 4 DATAOOO8 START Process Start Press to start copying file lt Display gt 1 10 20 Characters 1 COPY RUN P PARAMOOO 2 DATA 1 DATAOOO6 lt Original DIR and File name 3 DATA 2 DATA WK lt Target DIR and File name 4 Note If there is a file has same name already in the directory D VI shows alarm 17 Copy Disable 27 RESET Press to return to File Selection Mode RESET Process Finish When the display shows the copy is done press to return to File Selection Mode lt Display gt 1 10 20 Characters 1 COPY END P PARAMOOO 2 DATA 1 DATAOOO6 lt Original DIR and File name 3 DA
9. Please periodically backup your parameter file Restoration The parameter file backups downloaded to a PC can be restored to the D VI in cases where the D VI parameter file becomes corrupt Please upload the parameter file to the share folder from a PC with file sharing function or FTP Parameter file will be available in D VI by uploading to the share folder Please refer 11 FTP Function for FTP function and 9 3 Share Folder for sharing folder of parameter file 8 USB Memory Use of a portable USB memory stick makes it possible the directly transfer large amounts of data created on a pc to the NC machine and directly storing the data taken from the NC machine For facilities which do not have a network system D VI can still be used with USB memory for long continuous operation 1 Select root directory of USB memory There are no special settings for reading writing to the root directory of USB memory Just press during file selecting mode to go Directory Selecting mode Then press 0 to access the root directory of your USB memory 2 Select sub directory on USB memory To read write to a sub directory on your USB memory because the NC data is saved on there it is necessary to set the sub directory on the parameter 41 49 Directory Pass Name first Example USB DATA USB DATA TEST Please refer to 7 5 Directory Pass Settings for more information on settings After setting these parameters
10. Press Lo lt Display gt 1 10 20 Characters 1 PRM STOP P DEFAULT 2 gt 0 3 1 1 4 2 4800 Press twice lt Display gt 1 10 20 Characters 1 PRM STOP P DEFAULT 2 gt 0 3 1 1 4 2 4800 ALP When any other key except for is pressed the character on the display is selected and the cursor moves to the next position to wait for the next character gt Display by key ALP Each time pressing key D VI displays like following repeatedly Number gt Cap 1 gt l c 1 gt Cap 2 gt l c 2 gt Cap 3 gt l c 3 amp X5 gt M gt m gt N gt n gt 30 gt 055 4 2 Characters Limit There is a limit to how many Characters can be entered when typing filenames directly and or entering parameter data For typing filenames the limit is max 59 Characters and the parameter data depends on the parameter number CS If Characters are typed over the maximum the beginning of the string will be erased Ex Parameter Name Max 8 Characters PARAMOOOB lt If 1 is typed here O O ARAMOO0O01 lt P wil be erased 4 3 Select Directory Please refer 7 Parameter for each individual parameter limits Use to change the current Directory while in File Selection Mode Press to go to Directory Selection Mode and use a numeric keypad 0 9 to select the directory DIR 0 For USB Memory Stick DIR 1 9 For DIR1 DIR9 Set the Directory Pass Name for each directory on parameter 4 1 49
11. 1 OUT SEL gt DATAOOOT 2 DATA 2 DATAO0002 3F 6 DATAO003 4 R 216 3M DATAO004 Confirm File To confirm the file to output press The date and size of file will be displayed on the 29 line of the LCD And the first two blocks of the file details will be displayed on the 4 line of LCD Maximum first 10 blocks of the data can be displayed on the LCD to check use the up down cursor keys lt Display gt 1 10 20 Characters 1 OUT STOP P PARAMOOO lt Currently valid parameter file 2 DATA 1 DATAOOO6 300701701 00002048 lt Date and Size of data 4 GO1F200 lt Ablock of data RESET Note To change file press kl The display will be back to File Selection Mode Process Start Press to start processing Output Process status will be displayed on 3 and 4th lines of LCD lt Display gt 1 10 20 Characters 1 OUT RUN P PARAMOOO lt Currently valid parameter file 2 DATA 1 DATAOOO06 300000123 00002048 lt Output Data amount Data Size 4 gt gt lt Indicator to show process status RESET Process Finish When the display shows the process is done press to go back to File Selection Mode lt Display gt 1 10 20 Characters 1 OUT END P PARAMOOO 2 DATA 1 DATAOOO06 300000123 00002048 lt Output Data amount Data Size 4 xkkkkkk END kk kk lt Indicator to show the process is done 3 2 Input Data 1 Function Write NC data from NC machine to a designated file File Selection Mode Select DIR
12. 5 Directory Pass Name Settings to set the format lt Parameter type gt Character line lt Maximum character amount gt 59 Characters lt Range gt Random lt Default gt DAT DATA2 Directory Path Name of DIR3 Actual path name of Drive 3 to find with DIR key Please refer to 7 5 Directory Pass Name Settings to set the format lt Parameter type gt Character line lt Maximum character amount gt 59 Characters lt Range gt Random lt Default gt DAT DATA3 44 45 47 48 49 Directory Path Name of DIR4 Actual path name of Drive 4 to find with DIR key Please refer to 7 5 Directory Pass Name Settings to set the format lt Parameter type gt Character line lt Maximum character amount gt 59 Characters lt Range gt Random lt Default gt DAT DATA4 Directory Path Name of DIR5 Actual path name of Drive 5 to find with DIR key Please refer to 7 5 Directory Pass Name Settings to set the format lt Parameter type gt Character line lt Maximum character amount gt 59 Characters lt Range gt Random lt Default gt DAT DATA5 Directory Path Name of DIR6 Actual path name of Drive 6 to find with DIR key Please refer to 7 5 Directory Pass Name Settings to set the format lt Parameter type gt Character line lt Maximum character amount gt 59 Characters lt Range gt Random lt Default gt DAT DATA6 Directory Path Name of DIR7 Actual pa
13. Default gt In this manual Directory is the same as Folder in Windows 7 4 Default Parameter Files Default parameter is set DEFAULT No Parameter File Name DEFAULT PRM USERO96 PRM USER192 PRM USER384 PRM MZTRL PRM 0 Parameter name to be displayed DEFAULT USERO96 USER192 USER192 MZTRL 1 COM Port 1 1 1 1 1 2 Baud Rate 4800 9600 19200 38400 4800 3 Stop Bit 2 2 2 2 2 4 Character Length 8 8 8 8 8 5 Parity 0 0 0 0 0 6 Character Code 1 1 1 1 1 14 14 14 10 DC4 Character Code 14 14 ll 11 Insert NULL During output wait for DC1 ACK Character Code Output start interval During input wait for DC2 Auto rewind CTS Control during output RTS Control during output Input file punctuation format ojojojojojojojo olololololololo elelelelelelele ololol Jolololo Percentage of Commmunication delay File Extension oa SS 4 Keyword for Subprogram Execution Ingnore DSR 3 1 24 Wat for DC3 to finish output 25 Output pattern of bo o CC 26 Begin Eng mark of remote command 28 A9 28 A9 27 Spare Startup operation mode 0 0 Startup drive 1 1 Directory Name DIR1 DATA 1 DATA 1 DATA 1 DATA 1 DATA 1 Directory Name DIR2 DATA 2 DATA 2 DATA 2 DATA 2 DATA 2 Directory Name DIR3 DATA 3 DATA 3 DATA 3 DATA 3 DATA 3 Directory Name DIR4 DATA 4 DATA 4 DATA 4 DATA 4 DATA 4
14. Directory Using the numeric keypad Je gt Select File e _ Type File Name directly gt Confirm File Press START Processing the data input lt Done gt Press RESET OUT Mode File Selection Mode 2 Process Select Function Press D to display File Selection Mode Select Data File 1 Choose existing file and overwrite Press Bl to display the file name which has over 9 characters and 4 press to go back to the first line of the file list on the display SET Select a file And press to confirm lt Display gt 1 10 20 Characters 1 IN SEL gt DATAOOOS 2 DATA 1 DATAOOO6 3F 6 DATAOOO7 4 R 216 3M DATAOOO8 2 Manually type the filename as a new file To type filename directly press the key for Direct Typing mode Please refer 4 Supplement of Data Input for Direct Typing dada lt Display gt 1 10 20 Characters 1 IN STOP P PARAMOOO 2 DATA 1I DATA1234 New Filename 3 New File 4 gt If the existing file is chosen or typed D VI will display the message Overwrite Yes No to make sure if the file is ok to be overwrote After confirm if it is ok press Yes press No to go back to File Selection Mode Attention Once Yes was pressed the existing file will be deleted completely and the overwriting operation cannot stop until it is done lt Display gt 1 10 20 Characters 1 IN STOP P PARAMOOO 2 DATA 1 DATAOOO6 lt
15. LI DIR Number 0 For USB Memory Stick 1 9 Directories for data DIR1 DIR9 lt Display gt 1 10 20 Characters 1 DEL SEL gt DATAOOO1 2 DATA 2 DATAO0O002 3 DATAO003 4 DATAOOO04 Confirm File To confirm the file to input press The date and size of file will be displayed on the 3 line of LCD And first two blocks of the file details will be displayed on the 4 line of LCD Maximum first 10 blocks of the data can be displayed on the LCD to check with going up down cursor key lt Display gt 1 10 20 Characters 1 DEL STOP P PARAMOOO 2 DATA 1 DATAOOO6 300701701 00002048 4 GO1F200 RESET Note To change file press The display will be back to File Selection Mode START Process Start Press to start deleting file D VI will display the message to make sure if the file is ok to be deleted After confirm if it is ok press Yes press No to go back to File Selection Mode Use the cursor keys DS to select Yes No LA Or numeric keypad Yes No WW and press to confirm lt Display gt 1 10 20 Characters 1 DEL END P PARAMOOO 2 DATA 1 DATAOOO6 300701701 00002048 4 Sure Yes No When Yes is selected D VI excuses delete lt Display gt 1 10 20 Characters 1 DEL END P PARAMOOO 2 DATA 1 DATAOOO6 300701701 00002048 4 kkkkkkk END k kk x xx lt Indicator to show the process is done RESET Process Finish When the display shows the copy is done press to return to Output Mode 3
16. Press PRM on the keypad of D VI to go to Parameter Setting Mode 2 Display the details of the parameter file you want to use 3 Confirm by pressing the START key The parameter which is set by this step will remain even after D VI is reset 3 Create a new parameter When Create New File is selected on the Select Parameter File the Parameter settings page will be displayed The parameter will be default setting Please refer 7 3 Detail of Parameter to write a parameter file name and Confirm which places at very bottom of the page Parameter Settings Set up the parameter File Name Set up Parameter 0 Parameter Name to be Displayed 1 COM Port com x 2 Baud Rate 4800 Y bps 3 Stop Bit Olbit 2bit 4 Character Length O7 bit 8 bit 5 Parity none 6 Character Code Iso e 7 DC1 Character Code i 8 DC2 Character Code 12 55 MZ Command response timeout 5 _ Leer ODo not display 56 Display Network Setti a ee Display Network Settings 11 6 Time Settings Maintenance Menu When Time Setting is selected on the setting menu The time setting page will be displayed After editing the settings please press Confirm which places at very bottom of the page to confirm the settings il Pr AMA A D Br BR GYO Time Settings Time and Date Configuration Please click Set to change time and date U Time settings by machine side Press
17. Select a parameter file and edit the parameter data File Selection Mode DSG Select Parameter File Set File SET Data Edit Mode Data Change Mode Input Data Confirm Data Update Parameter File lt Done gt RESET OUT Mode File Selection Mode 2 Process Select Function Press Pa to display Parameter Setting Mode and use the cursor keys to select a parameter file lt Display gt 1 10 20 Characters 1 PRM SEL gt DEFAULT 2 PARAMOO1 3 PARAMOO2 4 PARAMOO3 Note To confirm the current network settings please choose NW at the very last line of this display Please refer 4 Confirm the current network settings for more details Confirm File Press to confirm the parameter file lt Display gt 1 10 20 Characters 1 PRM STOP P DEFAULT 2 gt 0 DEFAULT lt Current cursor position 3 1 1 4 2 4800 Select Parameter Number Use cursor keys to select parameter number to edit lt Display gt 1 10 20 Characters 1 PRM STOP P DEFAULT 2 O DEFAULT 3 1 1 4 gt 2 4800 Edit Parameter File Adjust the cursor to the parameter file to edit and press to enter Data Input Mode LI Data Input Mode There are two modes to input data Mode1 Input at current display Mode2 Input at Input Display Mode2 is only used for parameter 41 49 Directory Pass Name For other parameters use Mode1 1 Mode1 At Mode1 input data directly to the selected paramete
18. shared folder Tool T Map Network Drive 2 My Computer File Edit View Network Drive Q O et TEE Synchronize Folder Options Favorites 4 Address My Computer puter System Tasks View system information K Add or remove programs DC Change a setting Hard Disk Drives Other Places Pr Local Disk C oa amp My Network Places ne CH My Documents Shared Documents Devices with Removable Storage G Control Panel A o a Please follow the wizard of Map Network Drive Map Network Drive Windows can help you connect to a shared network folder and assign a drive letter to the connection so that you can access the folder using My Computer Specify the drive letter for the connection and the folder that you want to connect to M Reconnect at logon Connect using a different user name Sian up for online storage or connect to a network server 2 Add a network place Click Add a network place to connect to the shared folder manually a My Network Places Edit View Favorites Tools Help File E gt Ki gt search I Folders RE Address a My Network Places Network Tasks Le Add a network place Set up a home or small office network Set up a wireless network for a home or small office View workgroup computers _ Show icons for networked UPnP devices Other Places
19. 0 Characters 1 NW DHCP 2 IP 192 168 0 100 3 NM 255 255 255 0 4 GW 192 168 O 1 Finish the confirmation of network setting RESET Press to go back to Parameter Selection Mode 3 7 Switch Operation Mode 1 Function The operation mode upon power on is depending on the parameter setting parameter 29 However the operation mode is still able to be switched manually after the power on Normal Mode amp Remote command Mode 2 Process gt Normal Mode Remote command Mode Press display default mode OUT Mode lt Display gt 1 10 20 Characters 1 OUT SEL gt DATAO0005 2 DATA 1 DATAO006 3F 6 DATAOOO7 4 R 216 3M DATAOOO8 DSG Press to switch modes and use or keys to select START lt Display gt 1 10 20 Characters 1 Remote Command 2 3 4 START RESET gt Remote command Mode Normal Mode RESET During Remote command mode press to go back to default mode OUT Mode of Normal mode 4 Supplement of Data Input 4 1 Input Alphabet Alphabetical characters are available for input when typing filename directly and editing parameter data Use a numeric keypad to type alphabetical characters Press a numeric key on which has an alphabet character you want to type and keep ALP pressing until displaying the character you want It displays the numbers first capital letters of alphabet next and small letters of alphabet last To backspace press Ex Type N
20. 0123 00002048 lt Input Data amount Data Size A xkkkkkk END kx kx lt Indicator to show the process is done LI Attention When parameter 19 is set 1 Set RESET When parameter 19 is set 1 Set and you use to finish the data input instead of DC4 the display will NOT show the process is done but instead jump to File Selection Mode 3 3 Copy File 1 Function Copy a designated data file or all files into the designated directory COPY Original File Selection Mode gt Select DIR Directory Using the numeric keypad Su gt Select File gt Type File Name Directly gt Confirm Original File Select Target file Target File Selection Mode Select DIR Directory oo Using the numeric keypad SS Select File gt Type File Name Directl To create new file Confirm Target File Press START Processing File Copy lt Done gt Press RESET OUT Mode File Selection Mode 2 Process Select Function Press to display Copy Mode Select Original File Use cursor keys to select original file Press al to display the file name which has over 9 characters and press to go back to the first line of the file list on the display To copy all files select ALL on the very last line SET After selecting the file press to confirm lt Display gt 1 10 20 Characters 1 COPY SEL gt DATAOOOS
21. 05 DATA0006 DATA0007 Mode DATA 1 F 6 R 216 3M Filenames in the designated DIR directory 6 Push to scroll filenames to right and 4 push to scroll filenames to left Currently designated DIR directory Name F Number of files R Remaining capacity STOP gt To switch to Remote command mode on this display press and it displays Remote Command Please press to confirm For more details please refer to 3 6 Switch Operation Mode lt Remote Command Mode gt The D WM is waiting for a command from the NC when this display is shown and will go to the next display once it receives a command For more details about the display after different commands are received please refer to 9 Remote Mode Remote Command gt To switch to Remote command mode from this display press RESET For more details please refer 3 6 Switch Operation Mode O Display Firmware version Press Pa to display the D VI s firmware version in the bottom of Parameter Setting Mode display PRM SEL gt DEFAULT USEROO1 USER002 Ver 5 1 0 2 USER003 Firmware Version 5 3 1 Output Data 1 Function Output NC data in a designated NC data file to the NC machine Note This is the default mode upon power on and on finishing an operation reset OUT File Selection Mode gt Select DIR Directory Using the numeric keypad SET ee Select File
22. 3 SD Sending Data OUT 4 DTR Data Terminal Ready OUT 5 GND Signal Ground 6 DSR Data Set Ready IN 7 RTS Request Signal OUT 8 CTS Clear to send IN 9 RI Ring indicator IN 14 2 RS232 2 COM2 Pin Signal Detail Direction Name 1 CD Carrier Detect IN 2 RD Receiving Data IN 3 SD Sending Data OUT 4 DTR Data Terminal Ready OUT 5 GND Signal Ground 6 DSR Data Set Ready IN 7 RTS Request Signal OUT 8 CTS Clear to send IN 9 RI Ring indicator IN 15 RS232C cable D WI side 9pins female connector NC side 25pins male connector D W User s Manual Ver 1 01 KYORITSU SYSTEM MACHINE LTD 1 1 19 Kita shinjyuku Shinjyuku ku Tokyo Japan 169 0074 Tel 81 3 3369 6021 Fax 81 3 3369 6045 Website http www kyoritsu s co jp All Rights Reserved
23. 5 M98P3001L5 gt Key word needs to be at the beginning of the block gt If there is any character such as before the key word subprogram execution will not work gt Code M02 M30 and in the called Sub Program will be ignored The block includes M02 M30 and will not be sent 6 2 Automatic Rewind If this function is ON after sending data the NC data file will be rewound and prepared to be sent again instead of finishing the process gt After sending data wait for the next code DC1 to be set gt After receiving code DC1 from NC start sending data from beginning 7 Parameter 7 1 Parameter File Parameters are stored in a parameter file PRM There can be more than one parameter file The extension of parameter files should be PRM in capital letters 7 2 Parameter Details 0 Parameter name to be displayed Nickname of parameter for display on D VI 1 COM Port COM1 COM2 for communication UE with NC 2 Baud Rate 2400 38400BPS 3 Stop Bit 1bit 2bit 4 Character Length 7bit 8bit 5 Parity NONE EVEN ODD 6 Character Code ISO EIA ASCII In protocol B mode ISO EIA is automatic distinction 7 DC1 Character Code DC1 Code Usually HEX11 8 DC2 Character Code DC2 Code Usually HEX12 9 DC3 Character Code DC3 Code Usually HEX93 10 DC4 Character Code DC4 Code Usually HEX14 11 Insert NULL Insert NULL to the beginning of dat
24. 5 Display Files 1 Rearrange Rearrange the data files in the designated directory to be displayed on the D VI s display Data files can be rearranged numbers first and alphabet next by ascending or descending order and be reset the order Sp Press E to go Output Mode or Input Mode Order Files Use numeric key to choose how to rearrange 1 STU Ascending order Number 0 9 Alphabet A Z 2 Descending order Alphabet Z A Number 9 0 YZ J Reset Reset to the original order File display can be loop scrolled It goes back to the beginning when the cursor key scrolls to the end 2 Filtering Filter the file names to display only specified files whose name begins with same keyword characters Press on the file selection mode Type specified keyword characters on the display and press to enter The display will go back to the file selection mode and only the file names which has the keyword characters will be displayed RESET To cancel change the keyword characters vos BS To chancel the filtering delete all keyword characters by pressing D and press to enter 3 Display long file name Display long file names which has over 9 characters 6 Press E to display the file name which has over 9 characters and 4 press to go back to the first line of the file list on the display 3 6 Editing Parameters Please refer to the Parameter section for more details 1 Function
25. 5 Setting Editing Parameters 1 How to set There are the following three methods to edit parameters e Functionon D VW Web Web browser Recommended e Direct editing of parameter files 2 Function on D VI Parameters may be set without a network connection with this method Please refer to 3 5 Editing Parameters for more details It is easier to edit parameters via the following method Web if D VI is connected to a network because using a function on D VI may have difficulties such as the display only showing the parameter number and its value and the operation is only via a numeric keypad 3 Web Web browser D VI has a Web server function for the setting system and parameter settings If D VI can be connected to a network this method is the most effective way to edit parameters Here are some merits Not only parameter number but also the parameter details are visible e Easy to understand with the detail next to the parameter value and simply selecting the desired parameter without entering a numerical value Please refer 10 Web Settings for more details 4 Direct editing of parameter files D Me parameter file is in text format so the file in the shared folder may be edited via notepad or some other text based editor However this method might cause a system error if there is a mistake after editing Therefore this method is not recommended 7 6 Directory Path Settings lt Setting Forma
26. 7 Nickname of drive 8 to find with DIR key Actual name of drive directory is set at parameter 48 Nickname of drive 9 to find with DIR key Actual name of drive directory is set at parameter 49 Actual name of Drive 1 Actual name of Drive 2 Actual name of Drive 3 Actual name of Drive 4 Actual name of Drive 5 Actual name of Drive 6 Actual name of Drive 7 Actual name of Drive 8 Actual name of Drive 9 Protocol B MAZATROL MZ command response delay MZ command response time out When parameter 51 is Protocol B 52 55 are invalid Please refer 7 3 to setup 52 55 Display network settings Method to set IP Address IP Address Subnet mask Gateway Name Server Display parameter 56 61 or not display Set IP Address of D VI via DHCP Manual setting IP Address of D VI Subnet Mask of Network IP Address of Gateway Server IP Address of Name Server 7 3 Parameter Details 0 1 2 3 4 Parameter name to be displayed Nickname of parameter for display on D VI lt Parameter type gt Character line lt Maximum character amount gt 8 Characters lt Range gt Option lt Default gt DEFAULT COM Port For communication I F with NC lt Parameter type gt Numerical Value lt Maximum character amount gt 13 Characters lt Range gt 1 2 1 COM1 2 COM2 lt Default gt 1 Baud Rate For communication baud rate with NC lt Parameter type gt Numeric
27. A HK Zei M I REO Si BRAND YD AWW Ko Weir vate EB AO Br BRD Ayo Setup Menu Rebooting Current Settings Network Settings Parameter Settings Time Settings Reset System Restart Version 5 1 0 2 ER Ee PEZEN zm 12 FTP D W also has an FTP server function With the ftp command or applications such as FFFTP you can login to the shared folder where NC data files and parameter files are stored This function may be useful for situations in which file sharing via Windows network is not available You must have some kind of connection to a network however 1 IP address of D WI Use IP address to connect by FTP To check the IP address of D VI please refer 10 Web Settings 3 IP address of D VI 2 Limitation for connecting simultaneously FTP server of D VI is not available for connections from more than one client If there is a client which has already connected to the FTP server other clients will be refused 3 Login Please use the ftp command or applications such as FFFTP for Windows to login to the FTP server depending on your system 4 Username and Password The following are the usernames passwords for accessing NC data and Parameter data files Username Password Detail D7 DATA Nothing For access to NC data file D7 PARAM Nothing For access to Parameter data file Note The usernames for NC data and Parameter data are different Passw
28. Chosen Typed File name 3 4 Overwrite Yes No Use the cursor keys DS to select Yes No Or numeric keypad Yes LS J No LWW and press to confirm 3 All Input Mode When NC machine sends all files to D VI Punch all mode choose ALL which is on the very last line of the file list In All Input Mode D VI uses O number to name the files from NC and stores them by order If the file extension is set by parameter 21 the files will be stored with naming with file extension And press to confirm lt Display gt 1 10 20 Characters 1 IN SEL DATAOOOS5 2 DATA 1 DATAOOO6 3F 6 DATAOOO7 4 R 216 3M gt ALL gt Change Directory The LCD will display the Directory name which is currently selected max 10 characters To change Directory press and select the desired directory with the numeric keypad RESET Note To change file press The display will be back to File Selection Mode Process Start Press to start processing Input Process status will be displayed on the 3 and 4th lines of the LCD lt Display gt 1 10 20 Characters 1 IN RUN P PARAMOOO lt Currently valid parameter file 2 DATA 1 DATAOOO06 300000123 00002048 lt Input Data amount Data Size 4 gt gt Indicator to show the processing RESET Process Finish When the display shows the process is done press to return to File Selection Mode lt Display gt 1 10 20 Characters 1 IN END P PARAMOOO 2 DATA 1 DATAOOO06 30000
29. Ei Find and press DATE which locates very bottom of the parameter file selection mode and press to select lt Display gt 1 10 20characters 1 PRM SEL DEFAULT 2 PARAMOO1 3 NW 4 Ver5 3 0 2 gt DATE lt most bottom of the page The current network settings will be displayed lt Display gt 1 10 20characters 1 DATE lt 2011 gt 2712716 2 TIME 14 37 00 3 4 Use Jr keys to move lt gt until getting to the value to change Enter the value at this markm is blinking in the bottom lt Display gt 1 10 20characters 1 DATE lt 2011 gt 2712716 2 TIME 14 37 00 3 4 YEAR E amp Press to enter XThe settings are NOT confirmed yet at this moment START To confirm the settings press kel The new settings will be saved and available To cancel the settings press key instead of press key lt Display gt 1 10 20Characters 1 DATE lt 2011 gt 2712716 2 TIME 14 37 00 3 4 xkkkkk kx END k k KOK k k 11 7 Restart Restart D VI When Restart is chosen from the Setup Menu the following page will be displayed If itis ok to restart D VI please click Restart Restart The DAN needs to be restarted to update any changes made to the system Please click Restart to restart After Restart is clicked the LCD will display Rebooting and mmm Restart mmm on the web browser Webi YAT J SEMIH Windows Internet Explorer p 6 3 v E http 192 168 0100 K
30. KRS SYSTEM NC Data Communicator User s Guide Ver 1 01 Machine Ver 5 1 0 2 KYORITSU SYSTEM MACHINE LTD 1 OUTING a ae erregen 3 2 de L SENBE ARERHREBARERR BERN ARTEN BEERHREBSBERER SB BEERRAESSEEEHANBER 4 3 Operati E 5 3 1 Output Data ae a eer 6 3 2 Input Data EE 9 3 3 Copy E 13 3 4 Delete Fils 16 3 5 Display Files a ek 19 3 6 Editing Parameter 20 3 7 Switch Operation Mode nenn 25 4 Supplement of Data Input nnssssnnnnnennnnnnnnnnnnnnnnnnnnnnn 26 5 Communication Protoco uuusssssnnnnnennnnnnnnnnnnnnnnnnnnnnn 29 6 Special Functlon 2 4 r24822 4004er 32 T Parameter nen 33 7 1 Parameler Fl te rnit 33 7 2 Parameter Details ANNE 33 7 3 Parameter Details ANNE 35 7 4 Default Parameter Files 44444 46 7 5 Setting Editing Parameters sesssseeseeeeeeeeeeenee 47 7 6 Directory Path Setting uuun44 44 48 7 7 Backup and Restoration of Parameters 49 8 USB Memory 2 50 9 Remote Command Mode uusuunnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 51 10 Network Drive and Share Folder uuunnnsssnnnnnneeeeenn 54 11 Web Settings by Web Browser uuuuunnnsnnnnnnnnennnnnn 59 11 1 Bisplays an ce 60 11 2 Setup Men 61 11 3 Current Settings run ea 62 11 4 Network Settings nenn 63 11 5 Setting Parameler e sec essen 68 11 6 Time Settings Maintenance M
31. TA 2 DATA WK lt TargetDIR and File name A k e END kk o Indicator to show the process is done 3 4 Delete File 1 Function Delete a designated NC data file DEL File Selection Mode Select DIR Directory Using a numeric keypad SG ck Select File gt Type File Name directory Confirm File Press Processing delete file lt Done gt Press RESET OUT Mode File Selection Mode 2 Process DEL Select Function Press oe to display File Delete Mode Select File to delete Use cursor key to select file to delete 6 Press El to display the file name which has over 9 characters and 4 press to go back to the first line of the file list on the display To delete all files in the directory select ALL at the very last line lt Display gt 1 10 20 Characters 1 DEL SEL gt DATAOOOS 2 DATA 1 DATAOOO6 3 DATAOOO7 4 ALL gt Manually type the filename as a new file To type filename directly press the key for Direct Typing mode Please refer 4 Supplement of Data Input for Direct Typing dada gt Filtering Filter the file names to display only specified files whose name begins with same keyword characters Please refer 3 5 Display Files gt Change Directory LCD will display the Directory name which is currently selected max 10 characters To change Directory press and select the desired directory with the numeric keypad
32. The item on the left side is the parameter file name On the right side is the parameter display name Parameter 0 2 Parameter Settings The details of the parameter file which is selected on the Select Parameter File screen will be displayed Please refer to 7 3 Parameter Details to set your parameters and click Confirm to save changes Parameter Settings Set up the parameter File Name DEFAULT BE Name to be Displayed a Rate 4800 bps nen Ott Obe a CharcterLengh ew eg S np ees e Character Code Iso Ka Tr D DC Character Code a 56 Display Network Sens S Confirm or Cancel U Save parameter under a new name To save a parameter file with a new name type a new file name in the box and click Confirm to save Attention If the typed name already exists it will be overwrite the previous file without any advance notice Please be careful when choosing file names Parameter Settings Set up the parameter Type a new name File Name DEFAULT Set up Parameter Parameter Name to be Displayed DEFAULT Laan rm ese 44 U Switch parameter A Web browser is only used for editing parameter files Changes will not be reflected in the parameters currently in use because the parameter settings are always available even if D VI is communicating with an NC machine via RS232C To change the parameter settings please follow the steps bellow 1
33. XX FO1SPACEFFOLDER 1 FOLDER2PIFILENAME 2 Request command to D VI from NC NC has to be Program Read function Data will be started sending out when D VI receives DC1 set by parameter 7 from NC FO02 Input and save data to D VI from NC It corresponds to each program punch out from NC Process 1 Punch out remote command program from NC Create command program with a program number Oxxxx FO2SPACEFOLDER1 FFOLDER2 FILENAME 2 Output data from NC F20 Input and save data to D VI from NC It corresponds to punch out of all programs punch all which is punctuated O L number from NC Input programs to D VI will automatically be saved with using O number as file name Process 1 Punch out remote command program from NC Create command program with a program number Oxxxx F20 You can not specify folder name and file name 2 Output data from NC Note e Any remote program requires CRLF right before begin mark and right after end mark Begin end marks can be set by parameter 25 e When the parameter 29 is set to O Normal mode remote command will be available to the directory which is displayed right before switching to Remote command mode e When the parameter 29 is set to 1 Remote command mode remote command will be available to the directory which is set by parameter 30 e The files hav
34. a 12 During output wait for DC1 During output wait for DC1 from NC before starting 13 ACK Character Code Set when using any codes except DC1 during output 14 Output start interval Interval between receiving DC1 and starting data output mm sec 15 During input wait for DC2 After DC2 code create a file with the data during input DC2 is NOT included 16 Auto rewind Rewind the operation during data output 17 CTS Control during output Flow control during data output DC1 DC3 or CTS 18 RTS Control during output Flow control during data input DC1 DC3 or RTS 19 Input file punctuation format File punctuation of the created file during data input DC2 DC4 20 Percentage of Communication Delay Invalid 21 File Extension Extension of data file 22 Keyword for Subprogram Execution Keyword for calling a file from the main program M98P Prefix keyword free word 23 Ignore DSR Ignore DSR from the NC machine during data input output 24 Wait for DC3 to finish output Finish outputting data after receiving DC3 code 25 Output pattern of How to operate in program data during output 26 Begin End mark of remote command Set the marks by character code 27 Spare 28 Monitoring For monitoring lO when optional DI DO is used 29 Startup operation mode Operation mode when the system starts up 30 Startup drive Drive when the system starts up 31 32 33 34
35. al Value lt Maximum character amount gt 13 Characters lt Range gt 1200 1800 2400 4800 9600 19200 38400 lt Default gt 4800 Stop Bit Select Stop Bit 1bit 2bit lt Parameter type gt Numerical Value lt Maximum character amount gt 13 Characters lt Range gt 1 2 1 1bit 2 abit lt Default gt 2 Character Length Select Character Length 7bit 8bit lt Parameter type gt Numerical Value lt Maximum character amount gt 13 Characters lt Range gt 7 8 1 7bit 2 8bit lt Default gt 2 5 6 7 8 9 Parity Select Parity NONE EVEN ODD lt Parameter type gt Numerical Value lt Maximum character amount gt 13 Characters lt Range gt 0 1 2 0 NONE 1 ODD 2 EVEN lt Default gt 0 Character Code Select Character Code ISO EIA ASCIl lt Parameter type gt Numerical Value lt Maximum character amount gt 13 Characters lt Range gt 1 2 3 1 ISO 2 EIA 3 ASCII lt Default gt 1 DC1 Character Code DC1 Code Set by hexadecimal number Usually 11H lt Parameter type gt Numerical Value hexadecimal number lt Maximum character amount gt 13 Characters lt Range gt 00 FF lt Default gt 11 DC2 Character Code DC2 Code Set by hexadecimal number Usually 12H lt Parameter type gt Numerical Value hexadecimal number lt Maximum character amount gt 13 Characters lt Range gt 00 FF lt Default gt 12 DC3 Character Code DC3 Co
36. amount gt 13 Characters lt Range gt 0 1 0 Wait for DC3 1 NOT wait for DCH lt Default gt 1 25 26 27 28 29 30 Output pattern of How to operate in program data during output lt Parameter type gt Numerical Value lt Maximum character amount gt 13 Characters lt Range gt 0 1 2 3 4 5 6 7 0 No Operation Add to the beginning of data Add to the end of data Add to the both beginning and end of data No Operation Add CRLF to the beginning of data Add CRLF to the end of data Add CRLF to the both beginning and end of data NOOR OND II lt Default gt 0 Begin End mark of remote command Set Begin End marks by ISO or ASCII character code lt Parameter type gt Character line lt Maximum character amount gt 5 Characters lt Range gt Random lt Default gt 28 A9 Spare Monitoring For monitoring IO when optional DI DO is used lt Parameter type gt Numerical Value lt Maximum character amount gt 13 Characters lt Range gt 0 1 0 Don t use monitoring 1 Use monitoring lt Default gt 0 Startup operation mode Operation mode when the system starts up lt Parameter type gt Numerical Value lt Maximum character amount gt 13 Characters lt Range gt 0 1 0 Normal Normal Mode 1 Remote Remote Command Mode lt Default gt 0 Startup drive Setting the drive when the system starts up lt Parameter type gt Numeri
37. and 9 3 Display of Remote command When D W is waiting for command Remote Command During D VI is receiving command FAO1 1stline The received designated remote command ex FA01 1234 2nd line Directory Name and the designated output file name 3rd line Current output data amount by 2KB and File byte size 4th line The indicator gt gt gt during output or error details if D VI has any error 10 Network Drive and Share Folder D VI has a file sharing function via Windows network so that the uploading and storage of large amounts of NC program data created on systems such as CAD CAM can be made easily and speedily through out the network Also it is possible to directly send NC data stored on network drive to NC machine 10 1 Network Settings To access a network drive and a share folder it is necessary that the network settings of D VI are set properly Please use a PC which is on the same network to check if D VI accesses on the network properly Please refer to 10 4 Network Settings for more information on network settings 10 2 Network Drive A directory which can connect to an external PC via the file sharing function is called a Network Drive 1 Setting a Network Drive To set a Network Drive describe a path name for the share folder on a PC that you want D VI to connect to in parameters 41 49 Directory Path Name Example SMB PC1 DNC SMB PC1 DNC DATA
38. aracters lt Range gt 0 2 lt Default gt 0 15 During input wait for DC2 After DC2 create a file with the data code during data input DC2 is not included lt Parameter type gt Numerical Value lt Maximum character amount gt 13 Characters lt Range gt lt Default gt 16 Auto rewind 0 1 0 Wait for DC2 1 Not Wait for DC2 0 Rewind the operation during data output lt Parameter type gt Numerical Value lt Maximum character amount gt 13 Characters lt Range gt lt Default gt 17 CTS Control during output 0 1 0 Do NOT Auto rewind 1 Do Auto rewind 0 Flow control during data output lt Parameter type gt Numerical Value lt Maximum character amount gt 13 Characters lt Range gt lt Default gt 18 RTS Control during output 0 1 0 Control by DC1 DC3 1 Control by CTS 0 Flow control during data input lt Parameter type gt Numerical Value lt Maximum character amount gt 13 Characters lt Range gt lt Default gt 19 Input file punctuation format 0 1 0 Control by DC1 DC3 1 Control by RTS 0 File punctuation of the created file during data input DC2 DC4 lt Parameter type gt Numerical Value lt Maximum character amount gt 13 Characters lt Range gt lt Default gt 0 1 0 Punctuated by DC2 DC4 1 Punctuated by 2 Create file without punctuation code 0 20 21
39. arm 1 Flash disk error or file error Please press RESET to reset the alarm If this error occurs during operation the operation will stop Alarm Message Detail 11 Disk Full 5 No available space on disk 12 No Media 7 USB memory is not set 13 SMB Error 8 Can not connect to the network drive 14 Disk Error 6 Can not remount 9 Disk error 15 File Error 10 Failed to open directory 11 Directory reading error 12 Failed to change directory 14 Failed to open file 15 File mapping error 16 Failed to read file condition 17 Disable file 32 Writing error 16 Not Found 13 Not found file 17 Copy Disable 27 Copy without permission 13 3 Alarm 2 RS232C Error Please press RESET to reset the alarm If this error occurs during operation the operation will stop Alarm Message Detail 21 DSR Drop 20 DSR is set L 22 NC Error 21 No descriptive keyword for calling sub program 22 Data block error 28 Input character error 29 Decode error 30 Invalid character in buffer memory 31 Error inside buffer memory 23 RS232 Error 18 Can not open serial device 19 RS232 setting value error 26 Flow control setting error 14 External terminal 14 1 RS232 1 COM1 Pin Signal Detail Direction Name 1 CD Carrier Detect IN 2 RD Receiving Data IN
40. cal Value lt Maximum character amount gt 13 Characters lt Range gt 0 9 lt Default gt 1 31 32 34 35 36 Directory Name DIR1 Nickname of drive 1 to find with DIR key Actual name of drive directory is set at parameter 41 lt Parameter type gt Character line lt Maximum character amount gt 10 Characters lt Range gt Random lt Default gt DATA 1 Directory Name DIR2 Nickname of drive 2 to find with DIR key Actual name of drive directory is set at parameter 42 lt Parameter type gt Character line lt Maximum character amount gt 10 Characters lt Range gt Random lt Default gt DATA 2 Directory Name DIR3 Nickname of drive 3 to find with DIR key Actual name of drive directory is set at parameter 43 lt Parameter type gt Character line lt Maximum character amount gt 10 Characters lt Range gt Random lt Default gt DATA 3 Directory Name DIR4 Nickname of drive 4 to find with DIR key Actual name of drive directory is set at parameter 44 lt Parameter type gt Character line lt Maximum character amount gt 10 Characters lt Range gt Random lt Default gt DATA 4 Directory Name DIR5 Nickname of drive 5 to find with DIR key Actual name of drive directory is set at parameter 45 lt Parameter type gt Character line lt Maximum character amount gt 10 Characters lt Range gt Random lt Default gt DATA 5 Directory Name DIR6 Nickname o
41. changes Network Settings Network Configuration Please click Confirm to save your changes Host Name KRS Obtain IP Address Automatically DHCP How to Set Manual Configuration Work Group O User Authentication Authentication No Authentication User Account Password Display of Network Settings Default Setting LI HostName The name of D VI on the network It will automatically be named KRS 192 168 0 100 krs 100 if no name is set U Howto set Parameter settings such as IP address Obtain IP Address Automatically DHCP D VI will receive an IP address from your DHCP server upon start up Manual Configuration Set the address manually on the setup display Note When D W is set to Obtain IP Address Automatically DHCP it will only try to obtain an IP Address automatically via DHCP when it s powered on If an IP Address is not obtained for some reason such as when the network cable is not connected properly D VI will never try to obtain IP address via DHCP during operation For this case please restart D VI after making sure the network cable is connected to D VI properly in order to get an IP Address LI Work Group for Windows network Automatically set to WORKGROUP J if no name is set Authentication Authentication settings such as the User Account and Password of the PCs which D VI will connect to for file sharing are set in User Authe
42. de Set by hexadecimal number Usually 93H lt Parameter type gt Numerical Value hexadecimal number lt Maximum character amount gt 13 Characters lt Range gt 00 FF lt Default gt 93 10 11 12 13 14 DC4 Character Code DC4 Code Set by hexadecimal number Usually 14H lt Parameter type gt Numerical Value hexadecimal number lt Maximum character amount gt 13 Characters lt Range gt 00 FF lt Default gt 14 Insert NULL Insert NULL to the beginning of data lt Parameter type gt Numerical Value lt Maximum character amount gt 13 Characters lt Range gt 0 1 2 0 NOT Insert NULL 1 Insert NULL 2 Insert NULL 10 characters both beginning and end of the data lt Default gt 0 During output wait for DC1 During output wait for DC1 from NC before starting lt Parameter type gt Numerical Value lt Maximum character amount gt 13 Characters lt Range gt 0 1 0 Wait DC 1 NOT Wait DC1 lt Default gt 0 ACK Character Code Set when using codes other than DC1 to start output Set by hexadecimal number Available with the codes other than 0 0 DC1 lt Parameter type gt Numerical Value hexadecimal number lt Maximum character amount gt 13 Characters lt Range gt 00 FF lt Default gt 0 Output start interval Interval between receiving DC1 and start outputting data mm sec lt Parameter type gt Numerical Value lt Maximum character amount gt 13 Ch
43. e an extension which is set by parameter 21 is available to be output input Do not write extension after the file name in remote command begin end marks because the extension set by parameter 21 will be automatically add If output input the files have more than one kind of extension please keep the parameter 21 blank and write file name including extension in remote command begin end marks e When you use Remote command F01 F11 or F02 you can specify only sub folders that are set by parameter 41 49 e You do not have to input the folder names that have been set by parameter 41 49 in Remote command 2 FC cassette protocol emulation command Note When the parameters between NC and D VI are matched and input output device is set as F Floppy Cassette or F Handy File remote command will be automatically sent 9 2 Cancel output lt Cancel before sending data gt For both above commands and press on D Ws operation panel D VI will then wait for a command and will return to Normal Mode when is pressed lt Cancel after data is sent gt For both above commands and press on D Ws operation panel D VI will then wait for a command and will return to Normal Mode when is pressed Some NC machines send SYN NAK and CAN codes through RS232C interface when their reset switches are pressed When D VI received these codes it will stop output and display waiting for a comm
44. ear Please click Restart to restart now or Later to manually restart net Explorer L EIX ltr Pr gt AWW MO rar yo r Restart The D W needs to be restarted to update any changes made to the system Please click Restart to restart now or Later to manually restart Restart Later When Restart is clicked D VI s LCD will display TRebooting J and the browser will display mm Restart mmm Webasuxe YATh SEMIH Windows Internet Explorer 6 j http 192 168 0 100 Ss gt lt ol FD FRO RTV BACANA Y M AND we dr Weit var BER A A 521052 277702 Setup Menu Rebooting Network Settings Parameter Settings Time Settings Reset System Restart Version 5 1 0 2 ASM TENSE LIE 1 4k R100 11 5 Setting Parameter In the Parameter Settings menu you can create and edit parameters 1 Select Parameter file When Parameter Settings is clicked the Select Parameter File page will be displayed Please select a parameter file to edit and click Confirm To create a new parameter file please click Create New File Select Parameter File Select a parameter file to set To create anew parameter file please click gt Create New File DEFAULT DEFAULT USERO96 USERO96 USER192 USER192 USER384 USER334 LI File List File List shows the parameter files which have been saved on the system
45. enu 72 Ta 77 Best nde 74 E E ete ead 75 AA oc PAVEADEN E 76 WIR d 78 15 E ee E 78 1 Outline eD VI makes high speed DNC transfer of large amounts of data and NC controller Memory In Out functions possible with its compact size easy operation and reasonable price eD VI makes it easy and quick to upload and store large amounts of NC program data created on systems such as CAD CAM through out the network eD VI contains a safety semiconductor disk designed to be used in many varying environmental conditions such as vibrations extreme temperatures and electrical noise It also retains data after power reset eThe use of portable USB memory makes it possible to directly transferring large amounts of program data created on a PC to an NC machine and directly store data from NC machine e D V s compact size allows it to not only be used in environments which already have a local network system but it also allows the machine to be carried out of an office which has a CAD CAM system to an operation area or place out side of the office eUsers who have no equipment investment for network system or have adverse environmental conditions such as electric noise may be able to use D VI which is low priced but capable of managing large amounts of NC program data The long time operation with the large data makes better efficiency at the present facility 2 Functions D VI uses the file sharing system of your Wind
46. es or CAD CAM systems is the RS232C interface 5 1 Output Data out D VI gt NC DTR RTS DSR CTS RxD TxD 900 MONO Makes RTS signal H Check if DSR signal is H Wait until CTS signal becomes H When receiving code DC1 start outputting data It is possible to make outputting start without waiting DC1 by a parameter setting Stop outputting data when receiving DC3 When receiving code DC1 start outputting data again When all data is output D VI finishes the operation It makes RTS signal Lo to finish the operation It is possible to finish the operation when CTS signal becomes Lo after receiving code DC3 by a parameter setting Mode Processing 5 2 Input Data in NC gt D WU DTR RTS DSR CTS TxD RxD Oo NONO Makes RTS signal H Check if DSR signal is H When CTS signal becomes H send code DC1 Wait for code DC2 It is possible not to wait DC2 by a parameter setting If the buffer does not have enough capacity send DC3 When the buffer receives enough capacity send DC1 again Stop the operation upon receiving DC4 After finishing operation send DC3 and make RTS signal L Mode Processing 5 3 Input Data in Set NC gt D WU DTR RTS DSR CTS TxD RxD Makes RTS signal H 89 Oo ON Check if DSR signal is H Wait for code DC2 It is possible not to wait DC2 b
47. eter type gt Numerical Value lt Range gt 0 1 0 Not insert 1 Insert lt Setting gt 1 MZ command response delay lt Parameter type gt Numerical Value lt Setting gt 0 MZ command response time out lt Parameter type gt Numerical Value lt Setting gt 5 Display Network Settings Display parameter 56 60 or not display lt Parameter type gt Numerical Value lt Maximum character amount gt 13 Characters lt Range gt 0 1 0 Display 1 Not Display lt Default gt 1 57 58 59 60 61 L Method to Set IP Address Set IP Address of D VI via DHCP Manual setting lt Parameter type gt Numerical Value lt Maximum character amount gt 13 Characters lt Range gt 1 2 1 DHCP 2 Manual Setting lt Default gt 1 IP Address IP Address of D VI lt Parameter type gt Numerical Value lt Maximum character amount gt 13 Characters lt Range gt 0 9 lt Default gt 192 168 0 100 Subnet mask Subnet Mask of the Network lt Parameter type gt Numerical Value lt Maximum character amount gt 13 Characters lt Range gt 0 9 lt Default gt 255 255 255 0 Gateway IP Address of Gateway Server lt Parameter type gt Numerical Value lt Maximum character amount gt 13 Characters lt Range gt 0 9 lt Default gt Name Server IP Address of Name Server lt Parameter type gt Numerical Value lt Maximum character amount gt 13 Characters lt Range gt 0 9 lt
48. f drive 6 to find with DIR key Actual name of drive directory is set at parameter 46 lt Parameter type gt Character line lt Maximum character amount gt 10 Characters lt Range gt Random lt Default gt DATA 6 37 38 40 41 42 43 Directory Name DIR7 Nickname of drive 7 to find with DIR key Actual name of drive directory is set at parameter 47 lt Parameter type gt Character line lt Maximum character amount gt 10 Characters lt Range gt Random lt Default gt DATA 7 Directory Name DIR8 Nickname of drive 8 to find with DIR key Actual name of drive directory is set at parameter 48 lt Parameter type gt Character line lt Maximum character amount gt 10 Characters lt Range gt Random lt Default gt DATA 8 Directory Name DIR9 Nickname of drive 9 to find with DIR key Actual name of drive directory is set at parameter 49 lt Parameter type gt Character line lt Maximum character amount gt 10 Characters lt Range gt Random lt Default gt DATA 9 Spare Directory Path Name of DIR1 Actual path name of Drive 1 to find with DIR key Please refer to 7 5 Directory Pass Name Settings to set the format lt Parameter type gt Character line lt Maximum character amount gt 59 Characters lt Range gt Random lt Default gt DAT DATA1 Directory Path Name of DIR2 Actual path name of Drive 2 to find with DIR key Please refer to 7
49. n D WI This manual assumes that the user uses Microsoft Windows XP If you use a different Operating System you may still use sharing functions with your network Please refer the manual for your system 1 Sharing Folder Name D VI shares a store directory for NC data file as well as parameter file Please go to My Network on Windows and use this share name NC data file KRS DATA Parameter file KRS PARAM These files and folders can be created edited and erased So please carefully take care of these files and folders 2 Limitation of file and folder name Please do NOT use Japanese for file and folder names for a sharing folder because the D VI can NOT display Japanese and it might cause an unexpected error 3 Change parameters 41 49 To change the folder name or use a newly created folder it is necessary to change parameters 41 49 to make the DIR number selection available Please refer to 7 5 Directory Path name Settings for setting Incase the shared folder does not show up on My Network With regard to the specifications of Windows network system it may take awhile to display the shared folder of D VI or sometimes it may not show up at all If so please connect to the shared folder with the following steps 1 Tool T Map Network Drive to assign the drive name to the shared folder 2 Use Add a network place of My Network and connect manually 1 Assign Drive name to the
50. ntication to the share folders gt Manual Configuration When Manual Configuration is selected an extra page will appear Please click Confirm after making changes Network Settings Network Configuration Please click Confirm to save your changes Network Settings P Retr Settings Most Nome mm Mar on Work Group Pe me HERE Manual Configuration Please set an appropriate IP Address and click Change to confirm your changes See ooo Netw Cd Soen Dog gt Attention The value should be set depending on your network configuration Please be sure or your network configuration before saving these settings 2 Confirm and Save After clicking Confirm the page of Updated settings will appear Please click Confirm to update settings or Cancel to make changes after making sure your settings are correct Internet Explorer ER size D ID AW A D MrR GO A Update settings Please make sure your settings are correct Click Confirm to update settings or Cancel to make changes How to Set Obtain IP Address Automatically Host Name KRS Work Group WORKGROUP Automatic Authentication No Authentication User Account Password Not Set Save Cancel v Tak 100 3 Restart The D VI needs to be restarted to update any changes made to the system After saving the settings the following page will app
51. ord is not necessary for command and applications 5 Root Directory When the login is successful the root directory will display as follows User Name Root Directory KRS DATA Share folder stored NC data file KRS PARAM Share folder stored parameter file Once logged into one shared folder you can not move to another folder 13 Alarm When D VWVI receives an error it will display an alarm While an alarm status is active D VI will stop the current process and will wait until the RESET key is pressed When RESET is pressed the alarm status will be removed and the system will return to OUT mode except in special case 13 1 Alarm O Alarm 0 means there is a system error Please restart the system after solving the problem Alarm Message Detail 1 System Error System Error 1 Setting is not defined 2 Invalid operation mode 24 Error of optional command line 25 Fail the change for priority order 63 Unexpected error No Memory Memory Error 3 Memory Shortage Buffer assignment 4 Memory Shortage Character line assignment Incorrect Parameter Error 23 Wrong description of parameter System Error 63 This error comes from the LINUX Kernel which D VI uses as its OS LINUX is operates various functions simultaneously and occasional generates an error from overflow Please restart D VII when this error occurs 13 2 Al
52. own please check parameter 51 To display parameter 51 parameter 50 should be 1 4 Connect to Web server Please open a browser on your PC which is connected to your network and input the IP address of D VI The Setup Menu and Current Settings of D VI will be shown in the browser window Webs YATL SIEB Windows Internet Explorer Ka v httpr 192 168 0 100 wll bea eed Air MID RRO RTV HACANA Y I ATW We te E webe VAFA ER A D Br Go a Setup Menu Current Settings Current Settings Display Current Settings Network Settings How to Set Obtain IP Address Automatically Host Name KRS Reset System Work Group WORKGROUP Automatic Restart Authentication No Authentication User Account Password Not Set Version 5 1 0 2 IP Address 192 168 0 100 Subnet Mask 255 255 255 0 Network 192 168 0 0 Broadcast 192 168 0 255 Gateway 192 168 0 1 Name Server EE u E PEN zm 11 1 Displays The display will show the Setup Menu and Current Settings first To go to each setting click each link in the Setup Menu Webi E YATh REMH Windows Internet Explorer GO E weineg RT Pr FD RRO ATW BRAND YD AIH We ft Weike VATA EBT A D AERO vor Setup Menu Current Settings Current Settings Display Current Settings Network Settings How to Set Obtain IP Address Automatically Time Settings ap Host Name KRS mu Work Group WORKGROUP Automatic Restart A
53. ows Network to send and receive NC program data to and from NC controllers The flash disk in the D VI which stores NC program data is a safety semiconductor disk designed for use in many varying environmental conditions It can be seen as a hard disk which retains data after power reset Mode Function FROM TO 1 OUT Output Data Designated Directory COM1 COM2 2 IN Input Data COM1 COM2 Designated Directory 3 COPY Copy File Designated Directory Designated Directory 4 DEL Delete File Designated Directory 5 PRM Set Parameter 2 1 Mode OUT Output Data Output NC data in a designated NC data file to the NC machine IN Input Data Write NC data from NC machine to a designated file COPY Copy File Copy a designated data file into a designated directory DEL Delete File Delete a designated NC data file PRM Set Parameter Select a parameter file and edit the parameter data 2 2 Operation Mode Normal Mode Normal operation mode Remote Command Mode Automatic operation via NC 2 3 Operational Keyboard COPY DEL gt D EIB Se 8 4 6 JKL PQR 2 VWX o a a gt ES U o lt UE an I m O m U o g om O m 2 4 Display LCD Display with back light 20 characters x 4 lines 20 Characters ay 3 Operation Start up Display lt Normal Mode gt DATA00
54. please go to Directory Selecting mode Then choose the DIR number which was set to the sub directory of USB memory X If your USB memory is switched to the another one D VI may need to be reset before processing may continue It depends on the type of USB memory 9 Remote Command Mode While following the commands from an NC machine the output file is prepared and the data is sent when the D VI receives the command to start sending data 9 1 Command Deiail 1 CF450 emulation command lt Description of Code gt SPACE Space code Any 1 byte code 7 7 amp or The character that is not used in NC data Input folder name instead of FOLDER1 and FOLDER2 Input File name instead of FILENAME FO01 Output data from D VI to NC with subprogram if subprogram execution command is in the program Process 1 Punch out remote command program from NC Create command program with a program number OXXXX FO1SPACEFFOLDER 1 FOLDER2PIFILENAME 2 Request command to D VI from NC NC has to be Program Read function Data will be started sending out when D VI receives DC1 set by parameter 7 from NC F11 Output data from D VI to NC without subprogram if subprogram execution command is in the program Process 1 Punch out remote command program from NC Create command program with a program number OXX
55. r line on the display Once the parameter is selected current data will be disappeared and the blinking cursor will wait for the new data After inputting parameter data by via the numeric keys press to confirm If Alphabetical characters are necessary please refer to 4 1 Input Alphabet for more information lt Display gt 1 10 20 Characters 1 PRM STOP P DEFAULT 2 O DEFAULT 3 1 1 4 gt 2 E gt Input Error Each parameter has limitations such as type range and character amount If the data input is unmatched or over the limit the display shows the alarm T 3 Incorrect1 Please refer 7 Parameter for more detail of each parameter s limitations lt Display gt 1 10 20 Characters 1 PRM ALRM P DEFAULT 2 O DEFAULT 3 gt 1 3 4 3 Incorrect 1 Alarm gt Return from input error Alarm RESET Press to go back to Data Edit Mode On the Data Edit Mode the display shows mark next to the invalid parameter data If there is any invalid parameter data with mark the file cannot be saved but shows alarm until valid data input lt Display gt 1 10 20 Characters 1 PRM STOP P DEFAULT 2 O DEFAULT 3 gt 1 3 lt Error mark Invalid data 4 2 4800 2 Mode2 The display switches to Input Display and the blinking cursor will wait for the new data input After inputting parameter data via the numeric keys press to confirm If Alphabetical characters are necessary please refe
56. r to 4 1 Input Alphabet for more information lt Display gt 1 10 20 Characters 1 Input parameter 2E 3 4 CS Error Same as Mode Cancel Data Input Press to cancel Data Input Mode Save Data To save input parameter data press This process is necessary whenever the parameter settings are edited Parameters which have been edited will have a mark before the 1st line of the parameter name Before edit PRM STOP P PARAMOOO l After edit PRM STOP P PARAMOOO After saving the data the display shows END lt Display gt 1 10 20 Characters 1 PRM END P DEFAULT 2 3 A kkkkkkk END x KK k k k k RESET Finish Parameter Setting Press to go back to File Selection Mode 3 Attention for editing parameters D VI can have plural parameter files and each file can be edited After editing parameters please press to confirm the changes If is pressed before confirmation the updates will not be saved to the parameter file The parameter settings which are set before power off will restore upon the next power on 4 Confirm the current network settings To check the current network settings on D VWs display choose NW on the very SET last line of parameter selection mode and press kl lt Display gt 1 10 20 Characters 1 PRM SEL DEFAULT 2 PARAMOO1 3 PARAMOO2 4 gt NW lt last line D VI displays detail of the current network settings lt Display gt 1 10 2
57. t gt DAT lt Directory Name gt lt Directory Name gt USB lt Directory Name gt lt Directory Name gt SMB lt Computer Name gt lt Share Folder Name gt lt Directory Name gt gt The item in can be omitted gt Identifier TDAT 1 means the stored drive in D VI TUSB J means USB memory and TSMB means network drive lt Directory of stored drive gt DAT lt Directory Name gt lt Directory Name gt gt Punctuation between directories is Slash gt First T can be omitted Example DAT DATA1 DAT DATA1 TEST DAT DATA1 lt Directory of USB memory gt USB lt Directory Name gt lt Directory Name gt Punctuation between directories is Slash gt First T can be omitted Example USB DATA USB DATA TEST USB DATA lt Directory of Network Drive gt SMB lt Computer Name gt lt Share Name gt lt Directory Name gt gt Punctuation is T Slash gt The first mark is TA which can NOT be omitted gt lt Computer Name gt and lt Share Name gt can NOT be omitted Example SMB PC1 DNC SMB PC1 DNC DATA 7 7 Backup and Restoration of Parameters Backup The parameter file can be downloaded to a PC from the share folder with a file sharing function or FTP Backed up parameter files can be shared with or moved to another D VI and used for system restoration in case D VI needs to be replaced
58. th name of Drive 7 to find with DIR key Please refer to 7 5 Directory Pass Name Settings to set the format lt Parameter type gt Character line lt Maximum character amount gt 59 Characters lt Range gt Random lt Default gt DAT DATA7 Directory Path Name of DIR8 Actual path name of Drive 8 to find with DIR key Please refer to 7 5 Directory Pass Name Settings to set the format lt Parameter type gt Character line lt Maximum character amount gt 59 Characters lt Range gt Random lt Default gt DAT DATA8 Directory Path Name DIR9 Actual path name of Drive 9 to find with DIR key Please refer to 7 5 Directory Pass Name Settings to set the format lt Parameter type gt Character line lt Maximum character amount gt 59 Characters lt Range gt Random lt Default gt DAT DATA9 50 51 52 53 55 56 Spare Communication Protocol Select Protocol B or MAZATROL lt Parameter type gt Character line lt Maximum character amount gt 13 Characters lt Range gt B M T B Protocol B M MZ M Protocol For MAZATROL M2 T2 M32 T32 M plus T plus T MZ T1 Protocol For MAZATROL M1 T1 lt Default gt B MBS plotocol which is displayed on Web setting display is not available Parameter 52 55 are only available when 51 is set to M or T MZ Command response Mode lt Parameter type gt Numerical Value lt Setting gt 00 MZ parity lt Param
59. uthentication No Authentication User Account Password Not Set Version 5 1 0 2 IP Address 192 168 0 100 Subnet Mask 255 255 255 0 Network 192 168 0 0 Broadcast 192 168 0 255 Gateway 192 168 0 1 Name Server RFNRTNELK KI RR Sie R100 LI About the pictures on this chapter The pictures on this chapter are by Microsoft Windows XP SP2 Internet Explorer 6 0 SP2 11 2 Setup Menu The Setup Menu is always shown on the left side of the display Setup Menu Current Settings Network Settings Parameter Settings Time Settings Reset System Restart Version 5 1 0 2 11 3 Current Settings Please verify the Current Settings of D VI before you make changes You may use this page to compare between the default system settings and your new settings s Internet Explorer ER HEEN IER YID AUF l A D A BR Gyno Current Settings Display Current Settings How to Set Obtain IP Address Automatically Host Name KRS Work Group WORKGROUP Automatic Autbenticali No Authesticai User Account Password Not Set IP Address 192 168 0 100 Subnet Mask 255 255 255 0 Network 192 168 0 0 Broadcast 192 168 0 255 Gateway 192 168 0 1 Name Server PER ST Q100 11 4 Network Settings 1 Display Please click Network Settings on the Setup Menu and press Confirm after making your
60. y a parameter setting Wait for the first code If the buffer does not have enough capacity send DC3 When the buffer receives enough capacity send DC1 again When receiving the second code finish getting the data for the file continue receiving Upon receiving DC4 or pressing the RESET key finish the operation After finishing operation send DC3 and make RTS signal L Mode Processing File data 6 Special Function 6 1 Sub Program If there is a Sub Program Name formatted properly D VI will send the Sub Program Also the Sub Program s Nest may be called The Sub Program has to be in the same directory that the processing program is in lt Format gt lt Keyword for Subprogram Execution gt lt File name of the Sub Program gt Keyword for Subprogram Execution Description Key Word of Sub Program Max 13 characters Set at Parameter number 22 Default Setting M98P O File name of the Sub Program Should be in the same Directory Subprogram name has to be written properly including extension in the main program lt Ex gt Subprogram name 03001 DAT Keyword for Subprogram Execution M98P O M98P3001 DAT When parameter number 22 is set M98P Prefix a Sub Program is able to be called repeatedly by specifying Separator character and number of times lt Ex gt Subprogram name 03001 Keyword for Subprogram Execution M98P O Separator character L Number to times

Download Pdf Manuals

image

Related Search

Related Contents

Samsung Galaxy Wave Vartotojo vadovas  User manual    x - KMS Technologies  Bedienungsanleitung  Lapara LA-ITR-1500-LCD uninterruptible power supply (UPS)  Bedienungsanleitungen  Manual de Instruções      

Copyright © All rights reserved.
Failed to retrieve file