User`s manual
Contents
1. Opening Your Safe For The First Time OPENING YOUR SAFE FOR THE FIRST TIME FIRST TIME ACTIVATION Your safe is ready for activation To open the safe and prevent it from locking before completing the first time activation a solenoid deactivation safety device has been installed BATTERIES AND EMERGENCY OVERRIDE KEYS Remove four 4 AA batteries and two 2 Emergency Override Keys They are located in the protective styrofoam insert at the top of the box USER ACTIVATION Install Batteries Q Turn handle upwards to the right and pull open the safe door Note This waterproof safe may require additional force upon initial entry Q Slide the battery compartment cover forward and remove The compartment is located inside the safe at the top of the door Install the four 4 AA batteries Make sure the batteries are installed in the proper direction as indicated in the battery compartment Slide the cover back into place BATTERY CONFIGURATION e Wd 00 U 00 Q After the batteries are correctly installed the red and green lights located at the top of the keypad on the front of the safe will blink twice the keypad backlight will flash once and you will hear a single beep Green Light Red Light Backlight Q Proceed to Activate Lock ENABLE DISABLE SOUND Once the batteries are installed if you do not hear a beep when entering the factory pre set passcode or during the personal passcode re programming2. 9 x tw 2 TA First Alert 2096DF BD First Alert MANUAL M08 0282 004 WWW FirstAlert com DIGITAL WATERPROOF FIRE SAFE WITH READY SEAL Index Overview of Your Safe Overview of Your Safe INDEX IOverview oft Your Safe A Opening Your Safe for the First Time TeSt LOCKING SYSLEING Programming a Personal Passcode Emergency Override Key Battery Replacement Additional Features Use MaintemanGe AMANS E Handy Hauler Handle and Wheels cscsssccssssssscsssssssscsssssssscsssssssscssssssessseees Safe Identification Record 5008 00000081080 10800101 7 104 4 0 Limited Warranty FOR YOUR PROTECTION v Do not remove the serial number tag from the safe v Store emergency override keys away from safe NEVER INSIDE Record all safe identification numbers on Safe Identification Record on page 12 Save this manual and NEVER keep it inside the safe OVERVIEW OF YOUR SAFE Congratulations Your new First Alert Digital Waterproof Fire Safe with Ready Seal will provide years of safe and secure protection for your valuables import
3. Write this number down for future reference Always purchase and use the batteries as specified by this User s manual Always replace all batteries at the same time It is recommended to replace all KEY NUMBER batteries at least once a year or sooner depending on amount of use The key number is located on Always clean the battery contacts in the battery compartment and on the the key If you do not have the batteries before installing new batteries key the number is also located Q Always make sure all batteries match the polarity and signs in the open on a sticker on the inside of the battery compartment emergency override key If your safe will not be used for an extended period of time it is recommended that you remove the batteries 1 Always promptly remove and properly discard of all used batteries Clean Hands Never attempt to operate the digital keypad if your hands have excessive dirt debris or liquids on them Clean Safe To clean the surface of your safe it is recommended that you use a mild cleaner e g window cleaner to avoid scratching or discoloring the surface 172171 101 17 111 REMOVE TAGS ipe d d NEVER brasive cl the safe or digital k d a In case your safe becomes inoperable or you lose your keys these identification numbers will be needed to correct the problem It is recommended that the number tags remain in place on the s
4. process enter the following key sequence into the digital keypad This will turn the sound on Repeat the 23 process if you want the sound turned off Test Locking System ACTIVATE LOCK Q Locate the small plastic Locking Pin on the inside of the safe door Grip and pull out completely then dispose of properly Q Leave the safe door open and proceed to Electronic Locking System Test TEST LOCKING SYSTEM ELECTRONIC LOCKING SYSTEM TEST With the door still open you can test the Electronic Digital Lock by manually activating the Locking System To activate the Locking System locate the locking push button on the inside of the safe door push it in and turn the handle to the left This will cause the live door bolts to extend out and into the locked position Now with the door open and the live door bolts in the locked position you may proceed to Testing the Passcode Dead Bolt Dead Bolt ENGAGING LIVE BOLTS Closing the safe door with the Live Bolts in the locked position can damage the safe The locking push button should only be used when testing or programming the safe with the door remaining open Test Locking System Programming A Personal Passcode TESTING THE PASSCODE Q With the safe door open and the Live Bolts engaged you can now test the Electronic Locking System using the pre set three digit factory code Locate the digital keypad on the front of the saf
5. A PERSONAL PASSCODE For security reasons it is very important that you program your own personal passcode into the digital lock The factory code should be changed immediately To program your own unique three to eight digit 3 8 passcode follow these steps Reset Button NOTE AFTER PRESSING THE RESET BUTTON THE RED AND GREEN LIGHTS ON THE KEYPAD WILL FLASH INDICATE THE PROGRAMMING IS AUTHORIZED AND YOU HAVE 10 SECONDS TO BEGIN Open the protective cover on the front of the safe to expose the keypad With the safe in the open position press the small reset button located on the inside top edge of the door Enter your new three to eight digit 3 8 passcode followed by the key B B BGO CG O USES Minimum 3 Digits Immediately repeat the sequence beginning with the new passcode followed by the key B B BB CG 0O USES Q The green light will light up solid for 5 seconds indicating your new passcode has been successfully entered Q Your new passcode will now be comprised of the three to eight 3 8 digit sequence you selected always followed by the sign The factory pre set Passcode will no longer open the safe Q You may change your passcode at any time by repeating the same steps It is important that you write down your personal passcode and secure it in a safe location away from the safe NOTE IF YOU FORGET YOUR PERSONAL PASSCODE ACCESS TO THE SAFE
6. ANCE ADDITIONAL FEATURES APPROPRIATE USE OF YOUR SAFE First Alert Waterproof and Fire Resistant Safes protect paper records and many other valuables 4 memory card lt 86B SHELVES CDs amp DVDs Memory Cards USB Drives External To allow for greater flexibility and further accommodate your Hare Drives particular storage needs this safe includes two 2 adjustable This product is NOT INTENDED to protect audio or video cassettes flo discs removable shelves data cartridges film and photos or photo negatives from fire Testing shows that the interior temperature of the safe remains below 350 F for one 1 hour during a fire up to 1700 F when used properly Your safe must be closed and latched in order to properly protect the contents from fire DELTA HINGE First Alert Safes with Delta Hinge use the patented concealed hinges to prevent a would be thief from prying the door open They re strong secure and certain to help you protect what matters most Verified fire protection for Position shelf so that the gripping ridges are on the top and towards the front of the safe Use Care and Maintenance Consumer Affairs Moisture Warning CONSUMER AFFAIRS We recommend that you place delicate items such as pictures or intricate jewelry into an air tight container before storing them in your safe Avoid placing your safe in areas of high humidity For optimum YOUR SAFE S UNIQUE I
7. CAN BE MADE USING THE EMERGENCY OVERRIDE KEY ONCE YOUR PERSONAL PASSCODE IS PROGRAMMED THE Y IMPORTANT FACTORY PRE SET CODE WILL NO LONGER OPEN THE SAFE Emergency Override Key Battery Replacement Additional Features Use Care and Maintenance Q Locate the approximate position in the safe where you would like to place it and using the guides molded into the walls of the safe slide the shelf into place EMERGENCY OVERRIDE KEY BATTERY REPLACEMENT REMOVABLE FILE RACK For your convenience this safe also includes one 1 pre installed Locate and open the protective keypad cover on the front of the safe removable file rack If you would like to remove or re position the file rack simply grasp it on both sides pull forward and lift 7 it up and out of the safe To re install the file rack locate the approximate position in the safe where you would like to place it and using the guides molded into the walls of the safe slide into place LOW BATTERY INDICATOR Using a small Phillips head screwdriver remove the two screws securing the small Emergency Override Key lock cover located just below the digital keypad Pull forward on the cover to remove and set aside with the small screws Q Insert the Emergency Override Key into the lock and turn clockwise to the right Every time the keypad is activated the system automatically Red Light Turn the handle upwards to the right to open the
8. DENTIFICATION NUMBERS performance the safe should be opened and aired out for at least 20 When contacting Consumer Affairs you should be prepared to supply some minutes every two 2 weeks important information that specifically identifies your safe This information is extremely important to assuring prompt and accurate customer assistance Firearms Warning This safe is not designed to store medication items with combustible It is strongly recommended that you identify and record the following information content guns or other weapons in the Safe Identification Record form located on page 12 Pearls Because pearls sustain heat damage at temperatures below 350 F we MODEL NUMBER SERIAL NUMBER KEY NUMBER advise that you DO NOT store pearls in this fire safe LOCATING MODEL AND SERIAL NUMBERS SAFE CARE AND MAINTENANCE Most First Alert safes include a small metallic silver or gray tag affixed to one of When properly maintained your safe will continue to operate accurately for many the surfaces This tag is usually located on the front or right side of the safe This years In order to ensure optimum performance of your safe please follow these tag contains the serial number and on selected models a similar tag is attached simple precautions containing the model number If a model number tag is not attached to the safe then it can be located on the front or side panel of the box that the safe was Battery Maintenance packaged in
9. afe If removal is necessary then they should be attached to the inside back cover of this manual Store in a safe and secure place for future reference Waterproof Your new First Alert Digital Waterproof Fire Safe with Ready Seal is designed to help protect your valuables from fire and water This product has been validated to be waterproof when fully submerged for up to 1 hour and is not intended for long term underwater exposure For future reference store this manual in a secure area away from the safe DO NOT DISCARD Consumer Affairs Handy Hauler and Wheels HOW TO OBTAIN WARRANTY SERVICE If service is required do not return the product to your retailer In order to obtain warranty service contact Consumer Affairs at 1 800 323 9005 7 30 a m 5 p m Central Standard Time Monday through Friday To assist us in serving you please have the model number serial number and date of purchase available when calling For Warranty Service return to First Alert Inc Attn Warranty Safe Returns 23610 S Banning Blvd Carson CA 90745 ESTABLISH AWARRANTY RETURN SET UP PLEASE CALL US AT 1 800 323 9005 TO ORDERING REPLACEMENT KEYS If you lose the Emergency Override Keys or would like additional keys you can purchase them from First Alert Inc You must supply the following information to assure accurate processing 1 Name Address Telephone Number 2 Safe Model Number Serial Number 3 Ke
10. ant documents and other personal items All First Alert safes are designed and built using the highest manufacturing standards to ensure maximum user satisfaction under a variety of conditions With proper care your First Alert safe will provide peace of mind for many years to come PACKAGE CONTENTS 2 2 Adjustable Shelves 4A 1 Removable Handy Hauler with Plastic Screw Covers Batteries 1 Removable Override Keys File Rack gt READY SEAL MOUNTING HARDWARE COMPONENTS TF o 6 Flathead Cover 1 Bolt Cover 1 Interior Fire Water 1 Mounting Bolt with 1 Upper Water Seal Screws Gasket Flat Washer o lo 1 Exterior Fire Water 1 Plastic 6 Flathead Bottom 6 Buttonhead Floor Gasket Bottom Cover Cover Screws Mounting Bracket Screws CJ 1 Floor Mounting 1 Ready Seal 1 Bolt 1 Ready Seal Bracket Mounting Template Handle Tool Mounting Instructions Components packed separately in bag All other components shipped attached to safe VY IMPORTANT DO NOT RETURN SAFE TO STORE If you are missing parts have difficulty programming your safe or have any other questions pertaining to its proper use and care DO NOT RETURN your safe to the store Please contact Consumer Affairs at 1 800 323 9005 7 30 a m 5 p m Central Standard Time Monday through Friday To assist us in serving you please have the model number serial number and date of purchase available when calling
11. e and open up the protective cover to expose the keypad Q When the cover is opened the keypad is activated and the keypad backlight will turn on and remain on for approximately five 5 seconds The keypad is still active even when the backlight turns off It will turn on again when any key is pressed The pre set three digit factory passcode is 159 Enter this passcode as follows NOTE ALL ENTRIES ARE ACCOMPANIED BY A BEEP AND THE GREEN LIGHT WILL FLASH Q After properly entering the entire sequence the green light will turn on and the lock will click You now have five 5 seconds to open the safe by turning the safe door handle upward to the right IF HANDLE WILL NOT TURN If the handle will not turn to the right after the green light comes on first turn the handle slightly back to the left until it stops then turn upwards to the right again to open Q Once the handle has been turned to the right the live bolts will disengage and retract into the door At this point d you have successfully unlocked the safe and the door can be opened Note This waterproof safe may require additional force upon initial entry 58 24 55 e M u Leave the safe door open and proceed to Programming a Personal Passcode SECURITY LOCKOUT PERIODS For added security the safe will automatically lock out entry for 15 minutes after three 3 attempts to open with an invalid passcode PROGRAMMING
12. ed product or component If the product is no longer available replacement may be made with a similar product of equal or greater value This is your exclusive warranty This warranty is only valid for the original retail purchaser from the date of initial retail purchase and is not transferable You must keep the original sales receipt Proof of purchase is required to obtain warranty performance BRK dealers service centers or retail stores selling this product do not have the right to alter modify or in any way change the terms and conditions of this warranty This warranty does not apply to the finish on the product This warranty does not cover normal wear and tear of parts or damage resulting from any of the following negligent use or misuse of the product use contrary to the operating instructions disassembly repair or alteration by anyone other than BRK or an authorized service center improper installation or exposure to extremes of heat or humidity Further the warranty does not cover Acts of God such as fire flood hurricanes and tornadoes BRK shall not be liable for any incidental or consequential damages caused by the breach of any express or implied warranty BRK is also not responsible for costs associated with removing or installing the product damage or loss of the contents of the product nor for the unauthorized removal of the contents or damages incurred during shipment Except to the extent prohibited by appl
13. he handle be removed thereby preventing unauthorized moving To remove the handle push in on the small release buttons located on each side of the handle and lift upwards Once removed store in a secure location for future use SAFE IDENTIFICATION RECORD Model Number Serial Number Key Number Digital Passcode Record Your passcode must be at least three 3 digits and no more than eight 8 digits followed by the sign Limited Warranty Limited Warranty LIMITED WARRANTY LIFETIME AFTER FIRE REPLACEMENT GUARANTEE If your First Alert Digital Waterproof Fire Safe is ever damaged by a fire BRK will replace it with a comparable model at no charge to the consumer Freight on the replacement unit is not included in the guarantee and must be paid by the consumer For claims submit your name and address a photo of the damaged safe along with its Model Number and a copy of the Fire Department report to BRK Consumer Affairs as proof of loss Once the information is received Consumer Affairs will contact you with further instructions LIMITED WARRANTY BRK Brands Inc BRK warrants that for a period of five 5 years from the date of purchase this product will be free from defects in material and workmanship at its sole option will repair or replace this product or any component of the product found to be defective during the warranty period Replacement or repair will be made with a new or remanufactur
14. icable law any implied warranty of merchantability or fitness for a particular purpose is limited in duration to the duration of the above Warranty Period Some states provinces or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts so the above limitations or exclusion may not apply to you This warranty gives you specific legal rights and you may also have other rights that vary from state to state or province to province or jurisdiction to jurisdiction If you have any questions that cannot be answered by reading this manual call Consumer Affairs at 1 800 323 9005 O 2011 BRK Brands Inc a Jarden Corporation company NYSE JAH 3901 Liberty Street Road Aurora IL 60504 8122 All rights reserved www FirstAlert com US PATENT NO D557 875 7 350 470 OTHER PATENTS PENDING
15. safe checks the power level remaining in the batteries If the power falls below a certain level the red light will flash every two NOTE IF BATTERIES NEED REPLACING PROCEED WITH STEP 5 seconds to indicate the need for new batteries OTHERWISE PROCEED TO STEPS 6 8 BOLTING DOWN YOUR SAFE For added security your safe can be bolted to the floor With Ready Seal Technology you are able to bolt your Fire Safe to the floor without compromising the fire or water protection Please refer to the separate Ready Seal Mounting Instructions included in this package Slide the battery compartment cover located inside the safe at the top of the door forward and remove Remove and properly dispose of the four 4 nonworking batteries Install four 4 new AA batteries Make sure the batteries are installed in the proper direction as indicated in the battery compartment Slide the cover back into place Q DISABLE ENABLE SOUND Q Remove the Emergency Override Key and before replacing the lock cover enter your personal passcode to make sure the safe will open To enable turn on the sound during normal he following nce 23 Replace the lock cover using the two small screws and return the Emergency operation press the following key sequence Override Key to a secure place away from the safe Repeat the process to turn the sound off Close and lock the safe door by turning handle downward to the left USE CARE AND MAINTEN
16. y Number located on the key and on the Emergency Override Key Lock 4 Notarized statement of ownership a notary letter form can be printed off at www firstalert com 5 ndicate number of keys requested Please send all the information via fax at 630 851 7995 or mail First Alert Inc 3901 Liberty Street Road Aurora IL 60504 8122 Checks or Money Orders are required for orders received by mail and should be made payable to First Alert Contact our Consumer Affairs Department for costing information prior to ordering Mail To First Alert Inc Attn Consumer Affairs 3901 Liberty Street Road Aurora IL 60504 8122 HANDY HAULER HANDLE AND WHEELS This First Alert safe is equipped with our exclusive Handy Hauler removable handle and wheel assembly that allows the safe to be rolled easily into position in your home or office The following steps should be followed to initially position the safe or to relocate it at a later date To extend the handle pull upwards until the handle clicks and locks into position f the handle has previously been removed insert it back into the brackets on the safe and push it down until it snaps into the extended and locked position Q Place your foot against the base of the safe and tilt it forward using the handle This allows the wheels to extend and the safe can now be rolled to the designated area Q Once the safe has been properly positioned it is recommended that t
Download Pdf Manuals
Related Search