PDI-P15X - PDi Communication Systems
Contents
1. a Source Setup s Power on Channel ai a FM Radio Setup a Channel Lock Disabled a Channel Memory Override Enabled Position a Position A Exit SETUP Exit SETUP Four different tuning types are available depending upon the healthcare facilities signal style Selection of the correct signal type is required for the TV to recognize all possible channels and before any channel programming can begin 1 Press the SETUP button to display the SETUP MODE menu 2 Press the CHA CHY button to select CHANNELS Press VOL lt or VOLP to activate the menu item 3 Inthe CHANNELS menu press the CHA CHYF button to select Signal 4 Press VOL lt VOLP to select Air Cable STD Cable IRC or Cable HRC NOTE Most hospitals use the Cable STD signal style Auto Program The TV automatically scans each available channel for activity Channels that display activity are memorized into the selected Service Level Auto Program a Signal ji a Mode Analog Only s Auto Program a Channel Sequence Interleave A D a Add Delete Channels a Free Programmed gt a Clear Service Level a Basic Blank gt a Copy Service Level a Premium Blank gt a Parental Control s Power on Channel s Channel Lock a Channel Memory Override Position a Position A V Exit SETUP Exit SETUP 1 From the CHANNELS menu select Auto Program 2 Inthe AUTO PROGRAM menu press the CHA CHYF button to select Mode 3 Press VOL lt VOLP to set the scope of channel sca2. Moisture Do not use this product near water for example near a bath tub wash bowl kitchen sink or laundry tub in a wet basement or near a swimming pool and the like Accessories Do not place this product on an unstable cart stand tripod bracket or table The product may fall causing serious injury to a child or adult and serious damage to the product Use only with a cart stand tripod bracket or table recommended by the manufacturer or sold with the product Any mounting of the product should follow the manufacturer s instructions and should use a mounting accessory recommended by the manufacturer A product and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the product P and cart combination to overturn Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure ATA reliable operation of the product and to protect it _ from overheating and these openings must not be blocked or covered The openings should never be blocked by placing the product on a bed sofa rug or other similar survace This product should not be placed in a build in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have been adhered to Power Sources This product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply
3. normal TV operation Reattach the TV s rear access cover with 3 screws Restore Setting to TV 1 Remove the back access cover from the rear cabinet of the TV The cover is secured with 3 screws 2 Locate the CLONING port on the TV s connector field and insert the USB Thumb Drive A Cloning Main Menu will appear PO22T 211 MTI Svc R L IDEG m PILLOW CLONING tt sup COMPOSITE IN On 6 0 0 E VIDEO IN COMPONENT S VIDEO IN S VIDEO F OFF CR 3 Turnthe TV On Insert the USB Thumb Drive into the CLONING port A Cloning Main Menu will appear Cloning Main Menu i Restore Settings To TV a Restore Settings to TV Save Settings to USB Upload Firmware to TV Information Position a ext Sa Position A r Press the CHA CHY button to select Restore Settings to TV Press VOL to display a list of previously stored TV setups on the USB thumb drive Press the CHA CHY button to select a TV s setup file Press VOL once A confirmation screen will appear Press the CHA to restore the selected setup file or press VOL to exit without restoring A progress screen will appear as the settings are restored Once complete the TV will turn off Turn the TV on Remove the USB thumb drive Verify correct programming of the TV Reattach the rear access cover with 3 screws OS Ol Additional Information Additional information is available in the user man
4. PDI Communication Systems inc MODEL NUMBER Document Number PDI P15X PD196 134R4 Better Solutions Are Within Reach Support Arm Mounted Television Page 1 of 6 WARNINGS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL CAUTION To reduce the risk of electric shock do not remove cover or back No user serviceable parts inside Refer servicing to qualified service personnel This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons This symbol is intended to alert the user of the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance OVERHEAD FALLING HAZARD TV can pose a striking hazard when mounted at an elevated position Use only PDi mounting brackets support arms and appropriate hardware to assure TV will not fall from the mounted position Failure to do so may cause injury or death RAIN AND MOISTURE WARNING To avoid the hazards of fire or electrical shock DO NOT expose this television to rain or moisture OXYGEN ENVIRONMENT WARNING Do not use in any oxygen tent or oxygen chamber Such use may cause a fire hazard WET LOCATION A
5. Television Page 5 of 6 SOUND PROGRAMMING The TV s internal speakers can be disabled requiring the use of a headphone for private listening This option is commonly used in dialysis clinics and multiple occupancy rooms Internal Speaker Enable The speaker s inside the TV s cabinet can be Enabled turned ON or Disabled turned OFF Internal Speaker Enable Speaker a V Free Service Level Enabled s V Basic Service Level Enabled s TV Premium Service Level Enabled s Composite Video Enabled s S VIDEO Enabled a Component Enabled a HDMI Enabled s PC ANALOG Enabled a FM RADIO Enabled a Balance a Minimum Volume a Maximum Volume a Power on Volume ginternal Speaker Enable e HOM Audio Port a Composite Video Sound Mode e Headphone Sound Mode Position a Exit SETUP Position A Y Exit SETUP Next q gt 1 Inthe SOUND menu press CHA CHY button to select the Internal Speaker Enable menu item 2 Press VOL lt VOLP to activate the menu item 3 Press the CHA CHY button to select the desired Service Level s or Sources 4 Press VOL lt VOLP to alternately select Disabled or Enabled to turn OFF or ON the TV s internal speakers 5 Press the SETUP button to return to the preceding menu CLONING Cloning allows quick programming of a TV from a USB memory stick Thumb Drive Clone operation involves first downloading setup information from a programmed host TV to a Thumb Drive and then uploading the s
6. chnician to perform safety checks to determine that the product is in proper operating condition Wall or Ceiling Mounting The product should be mounted to a wall or ceiling only as recommended by the manufacturer Heat The product should be situated away from heat sources such as radiators heat registers stoves or other products including amplifiers that produce heat GROUND CLAMP NEC SECTION 810 20 NEC SECTION 810 21 GROUND CLAMPS ELECTIC SERVICE METER PANEL NEC ART 250 PAR Figure 1 PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 bX COAX GROUNDING BLOCK GROUNDING CONDUCTORS POWER SERVIC z aia NDING ELECTRODE SYSTEM u MODEL NUMBER Document Number HT i PDI P15X PD196 134R4 Better Solutions Are Within Reach Support Arm Mounted Television Page 3 of 6 INSTALLATION ON SUPPORT ARM The PDI P15X television is designed to attach to a wall mounted suspension arm capable of supporting a television weighing 12 pounds The single coaxial cable on top of the TV is used to supply either low voltage AC or DC power 28VAC or 24VDC and the RF signal to the television DANGER ARM RECOIL HAZARD The safety brake pin must remain in the SAFETY BRAKE PIN HOLE whenever the television is removed from the arm or when the arm is removed from the wall Retainer Bolt bracket to prevent the arm from springing open Lock Washer Safe
7. closed in this user manual This manual is issued for user information only and may not be used to manufacture anything shown herein Copyright 2008 by PDi Communication Systems Inc All rights reserved PRODUCT ASSESORIES Not Included with TV Programming Remote PD108 420 Patient Remote PD108 421 Support Arm PDI 508C 12 Wall Bracket Power Supply PDI 771B PDI 771CA Central Power Supply PDI 772 HE Individual Power Supply PDI 750A PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 bX 10 11 12 13 14 15 PDI Communication Systems inc Better Solutions Are Within Reach MODEL NUMBER Document Number PDI P15X PD196 134R4 Support Arm Mounted Television Page 2 of 6 IMPORTANT SAFETY iS TRG TOMS Read Instructions All the safety and operating instructions should be read before the product is operated Retain Instructions The safety and operating instructions should be retained for future reference Heed Warnings All warnings on the product and in the operating instructions should be adhered to Follow Instructions All operating and use instructions should be followed Cleaning Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for Cleaning Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards Water and
8. d found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential or commercial installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help PRODUCT MODIFICATION Do not attempt to modify this product in any way without written authorization Unauthorized modification could void the user s authority to operate this product TRADEMARKS Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories All other brand names and product names used in this manual are trademarks registered trademarks or trade names of their respective holder PDi and Better Solutions Are Within Reach are registered trademarks of PDi Communication Systems Inc Springboro Ohio COPYRIGHT PDi Communication Systems Inc claims proprietary right to the material dis
9. etup information to another TV Cloning can also be used to re program a programmed TV Save Settings to USB 1 Create a directory titled PDITDF on a USB Thumb Drive 2 Remove the back access cover from the rear cabinet of the TV The cover is secured with 3 screws POZET 217 SVC ORO PILLOW SPEAKER eo POSITE IN VGA CE je a PC VIDEO IN COMPONENT S VIDEO IN SVIDEO 3 Locate the CLONING port turn the TV on and insert the USB Thumb Drive A Cloning Main Menu will appear 4 Press the CHA CHY button to select Save Settings to TV Press VOL to display Cloning Main Menu Save Settings To USB Restore Settings to TV a Save Save Settings to USB Upload Firmware to TV Clear Filename Information Position a Next P ack maiia H PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 bX ba MODEL NUMBER Document Number HI PDI P15X PD196 134R4 Communication Systems inc e Better Solutions Are Within Reach Support Arm Mounted Television Page 6 of 6 5 Select the file name displayed on the second line and rename if desired Up to 8 characters may be used 6 Select Save to download the TV s setup to the thumb drive A progress screen will be displayed A confirmation screen will indicate completion of the saved file Press VOL lt to return to the main Clone menu 7 Remove the USB drive to return to
10. he National Electrical Code ANSI NFPA70 provides information with regard to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode See Figure 1 17 18 19 20 21 22 23 24 25 Example of Antenna Grounding as per NEC National Electrical Code Lightning For added protection for this product during a lightning storm or when itis left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the product due to lightning and power line surges Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal Overloading Do not overload wall outlets extension cords or integral convenience receptacles as they can result in a risk of fire or electric shock Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result i
11. n a fire or electric shock Never spill liquid of any kind on the product Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the power supply cord or plug is damaged b If liquid has been spilled or objects have fallen into the product c Ifthe product has been exposed to rain or water d If the product does not operate normally by following the Operating instructions Adjust only those controls that are covered by operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation e Ifthe product has been dropped or damaged in any way and f When the product exhibits a distinct change in performance this indicates a need for service Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards Safety Check Upon completion of any service or repairs to this product ask the service te
12. nning Analog Only TV searches for analog channels only Digital Only TV searches for digital channels only Analog and Digital TV searches for both analog and digital channels 4 Press the CHA CHY button to select the Channel Sequence menu item 5 Press VOL lt VOLP to set the Channel Sequence in which the channels are displayed after searching Interleave A D In the order of channel number regardless of the system All A then D Digital channels are displayed after all analog channels 6 Press the CHA CHYF button to select the Service Level you wish to program The menu displays the current programming status of each level as either Programmed or Blank NOTE A Programmed service level can also be re programmed if desired 7 Press the VOL button to start auto programming 8 A confirmation menu will appear before proceeding Press CHA to start auto programming Press CHV button to cancel the operation The TV will now search all available channels with an on screen progress percentage displayed Once complete press the SETUP button to return to normal TV viewing NOTE Any tuning Mode that includes Digital channels will require several minutes to complete auto programming PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 bX ba MODEL NUMBER Document Number HT PDI P15X PD196 134R4 Communication Systems inc I Better Solutions Are Within Reach Support Arm Mounted
13. pparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus PPE BB PP CLEANING AND DISINFECTION Clean the exterior of this television by removing dust with a lint free cloth CAUTION To avoid damage to the surface of the television do not use abrasive or chemical cleaning agents Spot test a new disinfectant by applying test cleaning a non obvious small spot on the TV s back cabinet keypad and LCD panel Allow the disinfectant to soak per its instructions and then wipe clean Do not use the disinfectant if the TV s surfaces show any sign of discoloration or softening MAINTENANCE AND SERVICING The TV does not require periodic maintenance other than cleaning Never remove the back cover of the TV this can expose you to high voltage and other hazards If the TV does not operate properly unplug it and call an authorized service center or PDi NOTE TO CABLE TV INSTALLER This reminder is provided to call the cable TV systems installer s attention to Article 820 40 of the National Electrical Code The code provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of the cable entry as practical Canadian installations shall be properly grounded in accordance with the Canadian Electrical Code Part 1 FCC This equipment has been tested an
14. the coax cable using the attached plastic clip For PDI 405 series arms remove the Safety Brake Pin from the Safety Brake Pin Hole and install ave thru rear mounting holes of the nose cover Lower Retainer Securely tighten DO NOT store the pin Plate A ey inside the nose of PDI 405 series arms Fi a 7 Close the metal nose cover onto the nose Reinstall the two Nose Cover Retainer Screws PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 bX ba MODEL NUMBER Document Number HT PDI P15X PD196 134R4 Communication Systems inc e Better Solutions Are Within Reach Support Arm Mounted Television Page 4 of 6 PROGRAMMING NOTE A programming remote control is required to perform all setup operations for the television The programming remote Part Number PD108 420 is NOT packaged with the TV and must be ordered separately The following instructions assume you have a programming remote have correctly mounted the TV and connected a coax cable that provides both Power and RF signal Channel Setup The TV offers three different programmable channel banks or Service Levels Free Basic and Premium Only one Service Level is usable at a time Channels a Service Level a Signal Cable STD a Picture s Auto Program gt a Sound a Add Delete Channels gt a Channel Setup a Clear Service Level al a Features a Copy Service Level ai 2 OSD Language a Parental Control a
15. to your home consult your product dealer or local power company For products intended to operate from battery power or other sources refer to the operating instructions Grounding or Polarization This product is equipped with a three wire grounding type plug a plug having a third grounding pin This plug will only fit into a grounding type power outlet This is a safety feature If you are unable to insert the plug into the outlet contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the grounding type plug Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items place upon or against them paying particular attention to cords at plugs convenience receptacles and the point where they exit from the product Protective Attachment Plug The product is equipped with an attachment plug having overload protection This is a safety feature See Instruction Manual for replacement or resetting of protective device If replacement of the plug is required be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built up static charges Article 810 of t
16. ty Brake Pin Hole 1 Remove and save the Retainer Bolt and Lock Washer from the TV s swivel Safety 2 Remove the two Nose Cover Retainer Brake Pin Screws and raise the metal nose cover 3 Slide the TV s swivel completely into the arm s clevis slot such that the Upper and Lower Swivel Plates sandwich the arm s nose The nose of the support arm should rest between each plate Cray 4 Align the Retainer Plate s mounting hole over the arm mounting hole Thread the Retainer Bolt with Lock Washer through the Top Retainer Plate the arm s nose and then into the Lower Retainer Plate Tighten Nose Cover Retainer Screws 5 The coax cable in the nose of the arm Fy should be joined with the coax cable from the television Wrench tighten the connection and cover by sliding the plastic boot sections into mating position IMPORTANT Finger Only tightening of this cable connection will result in reliability problems weeks or months later Because the TV draws its power current through this connection eventually the finger tightened connection will loosen due to thermal cycling develop resistance and prompt a Upper Retainer service call Wrench tighten all F fitting Plate connections T Re O N TETT a i e ng 6 For PDI 500 series arms remove the Safety Brake Pin from the Safety Brake Pin Hole reattach the acorn nut to the pin and store the assembly inside the nose of the arm by attaching it to
17. ual Please visit the company web site at pditv com or contact PDI Please request document number PD196 135 DISCLAIMER The author and publisher have used their best efforts in preparing this manual PDI Communication Systems Inc make no representation or warranties with respect to the accuracy or completeness of the contents of this manual and specifically disclaim any implied warranties or merchantability or fitness for any particular purpose and shall in no event be liable for any loss of profit or any other damages The information contained herein is believed accurate but is not warranted and is subject to change without notice or obligation PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 bX
Download Pdf Manuals
Related Search