Recaro ProSport Reha Car Seat-Supplement
Contents
1. If your seat does not have a metal plate it still can be installed as an accessory later Note The use of the recline position is not possible if the seat is fitted with a metal plate The Velcro strips hooks remain on the footrest adapter Carefully remove the plastic film from the backside of the Velcro strip fleece while the strip remains velcroed to the adapter Place the footrest adapter on an even surface The velcro must be on the top side Take the seat with the metal plate and position the base plate as follows a Adapter and base plate should lie flush at the front b The seat with its metal plate is to be positioned in the center of the adapter Position the seat flush in a 90 angle at the front of the adapter handle of the adapter facing forwards and tilt the seat over to velcro it to the adapter Footrest The footrest is attached to the adapter Fig 5a Attaching Velcro straps to the seat Fig 5b Attaching seat to adapter After having connected base plate and adapter for the first time loosen the connection of the velcro Hook Fleece again Then press the Velcro strips firmly to the surfaces of the base plate and the adapter for a second time to make sure that they are sticked down safely Further available accessory for the footrest adapter e Seatfix connection for footrest adapter accessory Item code 818 The seatfix connection secures the adapter and prevents slip2. RECARO ProSport Reha Instructions for assembly and use of the Reha version supplement Internet Download www thomashilfen us Thomashilfen RECARO ProSport Reha Instructions for assembly and use supplement Dear RECARO ProSport Reha user To make handling of your new children car seat safe practical and comfortable for both you and your child please read these instructions and the instructions enclosed to the seat before use Should you have further questions or problems please contact your specialist dealer or us directly Our address Thomas Hilfen f r K rperbehinderte GmbH amp Co Medico KG Walkm hlenstra e 1 D 27432 Bremerv rde Germany Phone 49 0 4761 886 63 or 68 E Mail info thomashilfen de www thomashilfen com Our address for customers in the USA ExoMotion LLC dba Thomashilfen 309 South Cloverdale Street Unit B 12 Seattle WA 98108 USA Phone 866 870 2122 toll free Fax 866 870 0801 toll free E Mail info thomashilfen com www thomashilfen us Thomashilfen RECARO ProSport Reha Instructions for assembly and use supplement General instructions Please note The 5 point safety belt integrated in the seat is intended for the HARNESS MODE when the child s weight is between 20 and 90 pounds and the child s standing height is between 27 and 50 inches only If the child s weight is between 30 and 120 pounds and the child s standing height is between 37 and 94 inc
3. ax 49 0 47 61 886 19 info thomashilfen de www thomashilfen com Item code 95656 status 06 2012 subject to technical alterations
4. belt lt a Thomashilfen RECARO ProSport Reha Instructions for assembly and use supplement 5 point safety belt Please note The 5 point safety belt integrated in the seat is intended for the use between 20 and 90 pounds only This requires that the seat must be secured with the vehicle s 3 point belt before The 5 point safety belt is already fitted in the seat For more information on the use of the belts please consult the RECARO user manual provided with the seat Adjusting the belt length Slightly lift the lateral seat cover and the fabric flap Now you can see the central belt adjuster in the seat shell To change the belt length press the lever down and adjust the belt by either pulling the strap coming out of the front of the seat shortening or by pulling out both shoulder belts lengthening Belt buckle Unbuckle the black chest clip by squeezing in the centre of it After that press the red dent ofthe buckle below Separate the two upper belt fasteners To close the belt bring the two upper belt fasteners together insert them into the buckle from above and push together until they lock in place with an audible Click Also bring the two black belt fasteners together and push them together until they lock in place with an audible Click Fig 1a Adjusting the belt length Fig 1b Opening the belt buckle Click Fig 1c Opening the black chest clip The rehab version feat
5. hes you can use the ProSport as a high back belt positioning booster BOOSTER MODE Purpose indication The children s car seat RECARO ProSport Reha is designed for the transport of children with special needs in vehicles The clinical pictures are amongst others e cerebral palsy e hypotony syndrome of unspecific genesis e muscular dystrophy e different syndrome diseases This car seat is characterized by its shell design and pad system which provide for additional seating safety stabilization of head and pelvis and support control of the feet Thus the RECARO ProSport Reha meets the needs of disabled children very well Application risks contraindications No application risks contraindications are known Use in Use in an Airerait Use in an Aircraft This child restraint is certified for use in motor vehicles and aircraft when used with the harness Secure the ProSport in the Harness Mode as shown on pages 29 30 of the original RECARO ProSport user manual Locking Lap Belt Installation Place the ProSport in the window seat to avoid blocking the aisle Note The ProSport is only certified for use in an aircraft without the turning plate and footrest accessories This child restraint is NOT certified for use in an aircraft when used as a belt positioning booster without the harness The use of a booster seat requires the use of a shoulder belt and lap belt Aircraft generally only provide a lap
6. just like the small one pulling the whole 5 point harness pad through the belt strap coming from below The cover zipper is removable and machine washable up to 30 C 86 F Please open the zipper of bottom 5 point harness pad as well in order to facilitate removing it Fig 9a Removing small standard 5 point harness pad Fig 9b Attaching big 5 point harness pad Thomashilfen RECARO ProSport Reha Instructions for assembly and use supplement Table accessory item code 884 Mount the side parts of the table first by pulling them right and left over the side elements of the seat from rear to front The side with the larger fabric must point outwards Pull the fabric over the side parts and tuck downwards overlaying fabric below the seat cover Now guide the long belt around the rear side of the seat and attach it to the table A small triangle Velcro on the left side part serves for attaching the belt when putting the table down at the right The cover can be removed and is machine washable up to 30 C 86 F Fig 10a Attaching side parts Fig 10b Applying table 10b 10 Thomashilfen Thomashilfen Member of the Internationale F rdergemeinschaft f r Kinder amp rehg KIND und Jugendrehabilitation e V Thomashilfen Thomas Hilfen f r K rperbehinderte GmbH amp Co Medico KG Walkmihlenstr 1 D 27432 Bremerv rde Germany Phone 49 0 47 61 8860 F
7. ping Note Your car must have an ISOFIX fixture at least on the rear passenger side Check before buying e Stabilizing bow rear for footrest adapter accessory Item code 819 Using the stabilizing bow increases the safety of the overall seat in combination with the adapter Thomashilfen RECARO ProSport Reha Instructions for assembly and use supplement Footrest short 12 cm 4 7 accessory item code 806 Press the catch springs in at the rear ends of the sliding rods and push the tubes into the holes as far as they will go To stabilize the footrest on the vehicle floor adjust the height of the support bars by screwing them in or out until they have contact with the vehicle Then lock the support bars with the hand knobs to prevent them unscrewing accidentally Screw the hand knobs upwards as far as possible and tighten them fast Lower leg length The lower leg length is adjusted by changing the height of the footrest Loosen both outer screws Retighten them after each adjustment Foot angle Loosen the four screws left and right on the underside of the footrest to adjust the desired foot angle with the rails Then retighten the screws Note Always secure the footrest against falling off with the hand knob provided with the user manual The receiver for the hand knob metal block with thread is situated on the left tube of the footrest adapter Fig 6a Inser
8. see the separate assembly manual enclosed with the seatfix connection Fig 7b Seatfix connection Stabilizing bow rear for turning plate accessory item code 819 Using the stabilizing bow increases the safety of the overall seat in combination with the turning plate Please see the separate assembly manual enclosed with the stabilizing bow Fig 7c Stabilizing bow rear Stand front for turning plate accessory item code 817 Using the stand increases the safety of the overall seat if no footrest has been fitted Please see the separate assembly manual enclosed with the stand Fig 7d Stand front Thomashilfen RECARO ProSport Reha Instructions for assembly and use supplement Seat wedge bottom accessory item code 810 The seat wedge is positioned in the center below the car seat The high edge is at the front to achieve an optimum rest position of the child The cover can be removed zipper and washed in the machine at up to 30 C 86 F Please note Function of the turning plate is considerably reduced if being used in combination with the seat wedge We therefore do not recommend using seat wedge and turning plate at the same time Fig 8a Positioning seat on seat wedge Fig 8b Final position 5 point harness pad accessory item code 91035 Remove the small standard 5 point harness pad first by pulling it off the belt strap Attach the 5 point harness pad
9. ting the support Fig 6b Adjusting height to vehicle 6b Thomashilfen RECARO ProSport Reha Instructions for assembly and use supplement WARNING Acc FMVSS 213 Do not use turning plate in harness mode see RECARO user manual Section 11 Installing the ProSport in your vehicle in the harness mode 7b 7C Turning plate with footrest adapter accessory item code 820 This accessory makes it easier for you to put your child into the seat and to take it out of the seat By turning the seat in the direction of the car door you do not have to lift your child over the side impact protection of the car child safety seat Note The use of the recline position is not possible if the seat is fitted with a turning plate Note Make sure that the seat has been pre assembled with a metal base plate The turning plate can only be attached to the metal plate If your seat does not have a metal plate it still can be installed as an accessory later Please see the separate assembly manual enclosed with the turning plate Fig 7a Turning plate with footrest adapter Further available accessory for the turning plate Seatfix connection for turning plate accessory item code 818 The seatfix connection secures the adapter and prevents slipping Note Your car must have an ISOFIX fixture at least on the rear passenger side Check before buying Please
10. ures a headrest providing additional lateral support for the head Due to the addition support in the neck region it provides child increased stability If not needed the headrest can be removed by opening the Velcro at the rear of the seat and taking the headrest off forwards Fig 2a Opening Velcro Fig 2b Removing headrest Thomashilfen RECARO ProSport Reha Instructions for assembly and use supplement Lateral trunk support The lateral trunk support is attached to the seat It can be removed if not needed by opening the Velcro behind the back cover The cover is machine washable up to 30 C 86 F Fig 3a Positioning on the seat Fig 3b Velcro fastening Lateral seat support Remove the 5 point harness pad from the belt buckle Attach the lateral seat supports by placing them on the seat and guiding the belt buckle through the slot provided in the support Re attach the 5 point harness pad to the belt buckle The cover can be removed and washed in the machine at up to 30 C 86 F Fig 4a Removing 5 point harness pad from belt buckle Fig 4b Positioning on the seat guiding belt buckle through slot Thomashilfen RECARO ProSport Reha Instructions for assembly and use supplement Footrest adapter accessory item code 821 Make sure that the seat has been pre assembled with a metal base plate The footrest adapter can only be attached to the metal plate
Download Pdf Manuals
Related Search