OBD2 D-METER數位顯示錶說明書 A4雙面-中英文-渦輪版
Contents
1. 18V Warning Range e Boost 0 99 1 50bar Boost mode indicator e Displaying boost lights on e Warning in flashing Exh temp mode indicator e Displaying exh Temp lights on e Warning in flashing intake temp mode indicator yp signow e Displaying intake temp lights on e Warning in flashing 0 lt lt G O SO Water temp mode indicator e Displaying water temp lights on e Warning in flashing Volt mode indicator e Displaying volt lights on e Warning in flashing 1 Select Mode Press the Mode button Press pawo fr our Uo 2 Warning Setting To display the Boost Mode as example To change into warning mode Press Set button for 2 seconds into warning setting mode The figure is flashing Mode 1 Set 1 No action wichin 5 sec back to displaying mode 3 Displaying peak Eliminate peak record To display the Boost peak as example Know the maximum peak value Displaying time is 2 for sec In peak mode Shortly press mode button to eliminate record and return to 0 Shortly press Set button entered Peak m Entered Peak mode lights on t No action within 2 sec back to displaying mode Troubleshooting Please check up following troubleshooting table for remedy if problem occurs during installation Cause Symptoms Trouble shooting Please make sure if every connector and terminal are2. OBD Il DIGITAL METER INSTRUCTION MANUAL CONTENTS LY Twin adhesive Main Init of D meter Lite User s Manual Please attach the user s manual to the product when transferring to others CF J FUNCTIONS e Boost Mode In displaying the boost press to grasp the condition of air intake e Exh Temp Mode In displaying the Exhaust Temp for the reference to engine working condition e Intake Temp Mode In displaying the intake temp for the reference to fuel injection e Water Temp Mode In displaying the water temp to master the working temp of engine e Volt Mode In displaying the working volt to check the working condition of power system CHARACTERISTICS e Easy Installation Easy to setup with OBDII connector e Power interruption memory except the initial setup no further action would be required system will remember the mode as used last time e Warning Setting With warning function Over the setting value warning light on e Multiple monitoring monitoring the status of 5 kinds of data in real time The buzzer will be triggered when warning values are exceeded IMPORTANT A WARNING Do NOT pull the wire for safety e Please read the manual carefully and completely before installation e For the initial setup please do shut off the engine and switch the gear to P or N e The damage or unexpected result due to incorrect installation is out of liability of o
3. fastened tightly OBDII connector in poor contact Poor contact of wiring between main device and control box Switch on and without any action coming up The sign appears on screen after switched on Product model not match with the applicable vehicle Please replace appropriate product model Indicators of other modes keep on flashing when in use The warning function of other modes were triggered Please switch to the flashing light mode and make sure if data are normal or raised The product not It is because the ECU computer switched off along with will normally switch off and stop the engine shutting sending out signal after a period of down time the engine shut down It is normal without worry The product not switched It is because the ECU computer on along with the engine will normally switch on and start start sending out signal after a period of time the engine start up It is normal without worry Please collect all accessoires are well as device and send to dealer if the product requies maintenance or warranty sericve
4. ur warranty such as wrong connection of electrode poles or damaged with abnormal usage Any loss of personal or property due to incorrect usage is out of our liability of responsibility or compensation e Never work in poor air ventilation space It may cause carbon monoxide poisoning or explosion and injure e Don t hurt the outer coating of the electric cables The broken cables may cause fire due to short circuit poor contact etc e Using insulation tape to sort out the harness as connected The pulling of the harness in driving is a dangerous action which will probably cause short circuit e Never operate this product in driving The operation or give attention to the display will cause absent minded in driving and will cause car accident e Please consult your dealer or the professionals in case you have problem in installation or not familiar with the harness The installation would require professional knowledge that those who are unfamiliar with the harness are advised to consult the dealer to the professionals for installation e The product is for DC 12V vehicles only This product is designed for DC 12V vehicles only it can t work with other volt e Please connect the harness exactly and firmly Suggest sealing the soldered joints with insulation tape and making sure no lead wire expose in the air e Never reproduce or fabricate or tear down and revise the product e Never install at the place with high temperature or humidit
5. y Malfunction could be encountered under these environments e Never apply excessive force on to the product after installation completed e Please note that objects adheres with double sided tape could easily fall off when just stick on INSTALLATION INSTRUCTION OBD I connector Computer diagnostic connector e Shut off ignition switch and plug OBD II into that of computer diagnosis device e Onboard computer diagnosis connector e Control box of D Meter Lite A e Plug into the connector of computer one Displayer Power Connecting Onboard computer diagnosis connector diagnosis device Plug into the connector of computer diagnosis device 3xAttention Please fasten the product and wire well if they are fallen off is very dangerous during driving A Attention Please make sure not to hold the cable when unplug the connector which might break or crack from the cable e Please hold the connector itself firmly when plug in or unplug the connector OPERATION INSTRUCTION Meter Lite layout and detailed description Peak Mode Button e In displaying the maximum value lights on W Set Button Display range e Boost 0 99 1 50bar Exh Temp 0 1100 C e Exh Temp 0 1100 C e Intake Temp 0 120 C e Intake Temp 0 120 C e Water Temp 40 160 C e Water Temp 40 160 C e Volt 8V 18V e Volt 8V
Download Pdf Manuals
Related Search