User Manual - Audio Authority
Contents
1. Inbound handset volume level adjustment Outbound handset volume level adjustment Press a key to select a unique ringtone for the selected Lane Station s 1 no override plays the ringtone set by each Counter Station All other keys represent unique ring tones which override any Counter Station settings Enables push to talk operation ON Program Audio heard when lane is idle or on hold OFF Program Audio heard only when lane is on hold Allows configuration of Lane Station relay contacts Model 1520 terminal block pos 9 amp 10 The contacts can be set to close using the HOLD key or while the lane is selected See Operator Card for HOLD key operation details This menu enables lane selection keys to be redefined in any configuration desired First select the lane number to be assigned using the VOLUME keys Then touch the key to be assigned to that lane If the desired key is already assigned touch it twice For 20 lane systems use Page Mode Page Mode allows the user to flip between two pages of keys The first page contains lane 1 10 the second 11 20 To enter or exit Page Mode touch the HOLD key while in KEY ASSIGNMENT System settings are saved to hub memory card System settings are restored from hub memory card This menu allows the firmware of system components to be upgraded 3 0 FIRMWARE UPGRADE INSTRUCTIONS The Series 1500 Intercom was designed to be firmware upgraded in the field if n2. its hardware and software following its policy to modify and or improve its products where necessary or desirable Audio Authority and the Double A Symbol are registered trademarks of Audio Authority Corp Copyright June 2007 All third party trademarks and copyrights are recognized 1 0 SYSTEM CALIBRATION AND SETUP The Model 1550 is a liquid crystal display that shows the setup menus and settings for Series 1500 Intercom Systems The entire system can be calibrated from one Counter Station Connect the 1550 Field Setup Display to the RJ45 jack on the underside of any live Counter Station The jack is at an angle Upon connection the 1550 will display Series 1500 EQUIPMENT CALIBRATION PLATFORM e Hold the SETUP key on the Counter Station for one second to enter Setup Mode The 1550 displays the top level of the menu shown on page 4 To navigate the menus use the VOLUME UP and VOLUME DOWN keys to move the cursor Use SETUP to enter a submenu or confirm a selection and PRIVACY to go back e Any changes you make are recorded as you exit each menu When you exit Setup Mode you must choose to either save all changes and exit or exit without saving If you need to re enter Setup Mode simply press SETUP for 1 second 1 1 USING THE KEYPAD FOR NAVIGATION CAMERA Select next or previous Station after selecting a single Lane or Counter Station VOLUME Move menu cursor up and down PRIVACY Go Back to SETUP E
3. User Manual Model 1550 Field Setup LCD AudioGbauthority Series 1500 Intercom Systems Model 1550 Field Setup LCD Table Of Contents 1 0 SYSTEM CALIBRATION AND SETUP 4 5 3 2 0 SETUPMENUMAP 2 0002 ee ee eee 4 3 0 FIRMWARE UPGRADE INSTRUCTIONS 6 4 0 CONTACT INFORMATION 00 28822 es 7 WARNINGS Read these instructions before installing or using this product To reduce the risk of fire or electric shock do not expose this unit to rain or moisture This product must be installed by qualified personnel Do not open the cover there are no user serviceable parts inside Do not expose this unit to excessive heat Install only in dry indoor locations Clean the unit only with a dry or slightly dampened soft cloth LIABILITY STATEMENT Every effort has been made to ensure that this product is free of defects Audio Authority cannot be held liable for the use of this hardware or any direct or indirect consequential damages arising from its use It is the responsibility of the user of the hardware to check that it is suitable for his her requirements and that it is installed correctly All rights are reserved No parts of this manual may be reproduced or transmitted by any form or means electronic or mechanical including photocopying recording or by any information storage or retrieval system without the written consent of the publisher Audio Authority reserves the right to revise any of
4. ble for 1509 3 EXIT WITHOUT SAVING Audio Hub If enabled the period between disengagement of blower and microphone audio un mute If enabled the length of time the system must be idle before entering Power Save LCD sleep If enabled allows one Counter Station to monitor others OFF idle Lane Stations display their own camera output ON idle Lane Stations DO NOT display their own camera output Press a key to select a unique ringtone for all traffic sensor events 0 no ringtone 1 use Lane Station Ringtone Override setting 4 BACKGRND THRESHOLD SINGLE LANE AUTO SELECT 1 LANE INBOUND VOLUME LVL OUTBOUND VOLUME LVL OPEN LOOP GAIN HANDSET MIC LVL HANDSET SPKR LVL RINGTONE OVERRIDE HALF DUPLEX ONLY PGM AUDIO ABATE RELAY OPERATION KEY ASSIGNMENT WRITE TO MEM CARD READ FROM MEM CARD FIRMWARE UPGRADE Adjustment for level of background audio rejected by Counter Station microphone O no rejection Configure lane without live audio Useful when lanes are in use or audio is not required for adjustments Configure lane with live audio Useful for adjusting inbound and outbound audio levels Inbound volume level adjustment Outbound volume level adjustment Adjustment for adapting to different acoustic environments Lower this setting for Lane Station acoustical environments with too much microphone and speaker coupling Increase this setting to hear more of the customer while operator is talking
5. ecessary In order to perform a firmware upgrade a memory card with the desired firmware level is required This procedure may vary for some early firmware versions Insert memory card into slot in Audio or Audio Video Hub Attach 1550 Field Setup Display to Counter Station Press and hold SETUP key on Counter Station for one second Select Menu Option 5 MEMORY CARD Select Menu Option 4 FIRMWARE UPGRADE Use the VOLUME keys to scroll through system components the current firmware level for each system component is displayed as well as the firmware level resident on the memory card 7 Touch the HOLD key to select deselect the listed component for upgrading Touch the MIRROR key to select deselect all components 8 To begin the upgrade touch the SETUP key twice Au BWN The firmware upgrade may take several minutes to complete If power is disconnected from the hub during the firmware upgrade the procedure must be repeated Once the upgrade is complete all indicators on the hub will return to normal operation 1 on 1 Systems may be upgraded by temporarily inserting a hub into the system 4 0 CONTACT INFORMATION If you have questions or require assistance with this product in areas not covered by this manual please contact Audio Authority using the information below Audio Authority Technical Service 800 322 8346 M F 8 30 AM to 5 00 PM EST International 859 233 4599 Fax 859 233 4510 Send email to supp
6. nter previous menu or Confirm i 2 POWER USER TIPS For faster menu navigation submenus may be selected by touching the key that is lit RED corresponding to the menu item see the numbered keys above For instance to enter BLOWER MOTOR DELAY press 1 and then 1 To Exit Setup Mode from any menu hold SETUP for one second and follow the prompts on the 1550 After adjusting a Lane Station or Counter Station use the CAMERA UP or CAMERA DOWN keys to select other stations for adjustment without leaving the submenu 2 0 SETUP MENU MAP 1 SYSTEM PARAMETERS 2 LANE PARAMETERS 3 TELLER PARAMETERS 4 SET DEFAULTS 5 MEMORY CARD 2 1 DEFINITIONS BLOWER MOTOR DELAY POWER SAVE DELAY SUPERVISOR TELLER LANE MIRROR DISABLE TRAFFIC SENSOR TONE 1 BLOWER MOTOR DELAY 2 POWER SAVE DELAY 3 SUPERVISOR TELLER 4 LN MIRROR DISABLE 5 TRAFFIC SENSOR TONE 4 INBOUND VOLUME LVL 6 BACKGRND THRESHOLD 2 OUTBOUND VOLUME LVL 3 OPEN LOOP GAIN 4 HANDSET MIC LVL 1 SINGLE LANE 5 HANDSET SPKR LVL 2 AUTO SELECT 1 LANE 6 RINGTONE OVERRIDE 3 GROUP OF LANES 7 HALF DUPLEX ONLY 4 ALL LANES 8 PROGRAM AUDIO ABATE 5 CANCEL 9 RELAY OPERATION 1 THIS TELLER 2 SINGLE TELLER 3 GROUP OF TELLERS 4 ALL TELLERS 5 CANCEL 1 KEY ASSIGNMENT 1 CANCEL 2 FACTORY DEFAULTS 1 CANCEL 2 WRITE TO MEM CARD 3 READ FROM MEM CARD 4 FIRMWARE UPGRADE Not available for 1 on 1 4 CANCEL configurations 2 EXIT AND SAVE Not availa
7. ort audioauthority com Audio Authority Corporation 2048 Mercer Road Lexington Kentucky 40511 1071 USA AudioGpAuthority 2048 Mercer Road Lexington Kentucky 40511 1071 Phone 859 233 4599 e Fax 859 233 4510 Customer Toll Free USA amp Canada 800 322 8346 Website http Awww audioauthority com 752 489 7107
Download Pdf Manuals
Related Search