TP 105 MA active 2 way full
Contents
1. e during transportation or storage use the original packaging or your own packaging material suitable for transport or storage respectively Establish all connections as long as the unit is switched off Use the shortest possible high quality cables for all connections WARNING Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country Always secure the device with a secondary safety attachment such as a Safety cable or a safety chain th mann MUSIC IS OUR PASSION 12 Installation CAUTION Risk of injury due to heavy weight Due to the heavy weight of the device at least two persons are required for trans port and installation NOTICE Possible property damage by magnetic fields Loudspeakers produce a static magnetic field Therefore maintain an appropriate distance to devices that can be adversely affected or damaged by an external magnetic field NOTICE Use of stands When mounting the device onto a stand ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand th mann MUSIC IS OUR PASSION 13 Installation 4 1 Tips on handling speakers We recommend you to set up the speakers in a way that the sound signals can reach the audi ence unobstructedly It will often be helpful to mount the speakers on tripods Thus the2. e indicate the XLR pin assignment Balanced wiring 1 Ground shielding 2 Positive signal h 3 Negative signal Unbalanced wiring 1 Ground shielding 2 Signal 1 A p 3 3 Bridged to pin 1 active 2 way full range speaker 16 Installation 1 4 phone sockets for signalin Drawing and table indicate the pin assignment of a 1 4 TS phone plug to be used and outputs L m in T C Unbalanced wiring 1 4 TS phone plug Unbalanced wiring 1 4 TRS phone plug th mann MUSIC IS OUR PASSION 17 Installation Balanced wiring 1 4 TRS phone plug th mann 18 Connections and operating elements 5 Connections and operating elements Rear panel th mann 19 20 Rotary control LEVEL Use this knob to adjust the input signal level Push button MIDFIELD NEARFIELD Use this switch to select different EQ characteristics and thus the operating mode of the speaker MIDFIELD monitor operation NEARFIELD computer operation or desktop speaker XLR mounting socket LINE INBALANCED 1 4 phone socket LINE INBALANCED RCA sockets LINE INUNBALANCED Both sockets are wired in parallel So you can feed the signal to another speaker Sensitivity is 10 dB higher than for the XLR and 1 4 connectors Thus the connection of computers and CD MP3 players is possible active 2 way full range speaker Ground Lift push button If hum is caused by a ground loop you can use
3. e or use suffi cient ear protectors NOTICE Risk of fire Do not cover the device nor any ventilation slots Do not place the device near any direct heat source Keep the device away from naked flames th mann MUSIC IS OUR PASSION Safety instructions NOTICE Operating conditions This device has been designed for indoor use only To prevent damage never expose the device to any liquid or moisture Avoid direct sunlight heavy dirt and strong vibrations NOTICE Power supply Before connecting the device ensure that the input voltage AC outlet matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker Failure to do so could result in damage to the device and possibly injure the user Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire th mann MUSIC IS OUR PASSION 10 Features 3 Features Special features of this device S 2 way system dome tweeter and 5 woofer S XLR 1 4 and RCA connections S M6 rigging points on top side and bottom Tripod and wall mounting possible with optional accessories s B ST MUSIC IS OUR PASSION 11 Installation 4 Installation Unpack and carefully check that there is no transportation damage before using the unit Keep the equipment packaging To fully protect the device against vibration dust and moistur
4. ice only if they are supervised or instructed by a person who is responsible for their safety DANGER Danger for children Ensure that plastic bags packaging etc are disposed of properly and are not within reach of babies and young children Choking hazard Ensure that children do not detach any small parts e g knobs or the like from the unit They could swallow the pieces and choke Never let children unattended use electrical devices th mann MUSIC IS OUR PASSION Safety instructions DANGER Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present Never remove any covers There are no user serviceable parts inside DANGER Electric shock caused by short circuit Always use proper ready made insulated mains cabling power cord with a pro tective contact plug Do not modify the mains cable or the plug Failure to do so could result in electric shock death or fire If in doubt seek advice from a regis tered electrician th mann MUSIC IS OUR PASSION Safety instructions CAUTION Possible hearing damage The device can produce volume levels that may cause temporary or permanent hearing impairment Over an extended period of time even levels that seem to be uncritical can cause hearing damage Decrease the volume level immediately if you experience ringing in your ears or hearing impairment If this is not possible keep a greater distanc
5. lights up green Otherwise the input signal is too weak or not present 3 Check for proper connection of the signal cable 3 Check the signal cable and or the signal source 4 Try using another signal cable When the music is loud the high HE limiting is active Reduce the volume frequencies plummet TP 105 MA 25 Symptom There s distortion There s different channel levels There s hum and noise Remedy The input signal is too strong Reduce the signal level Never operate the speaker box with such a high level that the BIN LIMIT LED lights up red constantly 1 Check whether the same kind of cables balanced unbalanced is used for both channels 2 Check wether your speaker system is completely wired and both speakers feature the same input sensi tivity 1 Press the Ground Lift push button on all amplifiers connected to the system if applicable 2 Make sure that only balanced cables are used 3 Make sure that all audio devices are connected on the same power circuit and therefore share common ground potential active 2 way full range speaker Troubleshooting If the procedures recommended above do not succeed please contact our Service Center You can find the contact information at www thomann de th mann MUSIC IS OUR PASSION 27 Protecting the environment 8 Protecting the environment Disposal of the packaging mate rial For the transport and protective packaging envi
6. ronmentally friendly materials have been chosen that can be supplied to normal recycling Ensure that plastic bags packaging etc are properly disposed of Do not just dispose of these materials with your normal household waste but make sure that they are collected for recycling Please follow the notes and markings on the packaging Disposal of your old device This product is subject to the European Waste Electrical and Electronic Equipment Directive WEEE Do not dispose with your normal household waste Dispose of this device through an approved waste disposal firm or through your local waste facility When discarding the device comply with the rules and regulations that apply in your country If in doubt consult your local waste disposal facility th mann MUSIC IS OUR PASSION 28 Notes th mann 29 Notes th mann 30 Musikhaus Thomann Hans Thomann Stra e 1 96138 Burgebrach Germany www thomann de
7. sound will be evenly spread with maximum range throughout the audience area Always use high grade cable to connect your equipment Otherwise you won t reach max imum sound quality For optimum results both impedance and power handling of the speakers must match the requirements of the amplifier Always follow the technical specifications of the speakers The overall impedance of the connected loudspeakers must not deceed the minimum output impedance of the amp The amps max RMS output power should be 50 above the power handling capacity of the connected speakers If you notice distortion during operation either the amp or the speaker is overloaded This may permanently damage the amp or the speaker Always reduce the volume when you hear dis tortion th mann MUSIC IS OUR PASSION 14 Installation 4 2 Hanging the speaker Top side and bottom of the speaker box provide M6 threads to hang the speaker on special rigging systems often called flying You can insert screw eyes into these threads Check for secure connection before you use it in flying mode 4 3 Pin assignment You can use XLR and 1 4 plugs with balanced or unbalanced wiring In the following we will give you an overview of the various options th mann MUSIC IS OUR PASSION 15 Installation XLR connections for signal in XLR mounting sockets serve as signal inputs XLR mounting plugs serve as signal outputs and outputs Drawing and tabl
8. the box TP 105 MA active 2 way full range speaker themann user manual MUSIC IS OUR PASSION Musikhaus Thomann Thomann GmbH Hans Thomann Stra e 1 96138 Burgebrach Germany Telephone 49 0 9546 9223 0 E mail info thomann de Internet www thomann de 27 07 2015 ID 291776 Table of contents bh WN on oa u Table of contents Generalimotes 1 10 00860a0 denken nee tere ae nenne 4 Safety Instructions essere 7 a T 11 Installation nantaise atnan nran ntent rantai TEE 12 4 1 Tips on handling Speakers sss 14 4 2 Hanging the speaker 4 3 Pin assignment unesesesessessensensenee Connections and operating elements sees 19 Technical specifications seene 23 Troubleshooting essere 25 Protecting the environment S 28 th mann MUSIC IS OUR PASSION General notes 1 General notes This user manual contains important information on safe operation of the device Read and follow all safety notes and all instructions Save this manual for future reference Make sure that it is available to all persons using this device If you sell the device to other users be sure that they also receive this manual Our products are subject to a process of continuous development We therefore reserve the right to make changes without notice th mann MUSIC IS OUR PASSION General notes Symbols and signal words This section provides an overview of the symbols and signal
9. this switch to separate the connection between the earth pin of the device and the signal ground in the device LED SIGN LIMIT This LED lights up green on incoming input signals This LED lights up red when the output signal is limited by the device due to an excessive input signal level LED ON This LED lights up green when the device is turned on and the supply voltage is available IEC chassis connector AC Connection for mains supply voltage TP 105 MA 21 Connections and operating elements th mann 22 6 Technical specifications Speakers Max sound pressure level Frequency response Cutoff frequency Woofer Tweeter Inputs Input sensitivity Input impedance Dispersion V x H 5 woofer and 1 tweeter 114 dB 70 Hz 20 kHz 3 kHz 80 W D class 20 W XLR sockets 1 4 phone sockets RCA sockets XLR and phone socket 0 775 V 0 dB RCA socket 0 245 V 10 dB XLR and phone socket 20 kQ balanced 10 KQ unbalanced RCA socket 10 kQ unbalanced 60 x 90 TP 105 MA 23 Technical specifications th mann 24 Troubleshooting In the following we list a few common problems that may occur during operation We give you some suggestions for easy troubleshooting Symptom Remedy The unit does not work 1 Check the mains power connection and the position of the POWER switch There is no sound 1 Check the position of the LEVEL control 2 Check wether the BIN LIMIT LED
10. words used in this user manual Signal word Meaning DANGER This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided WARNING This combination of symbol and signal word indicates a pos sible dangerous situation that can result in death or serious injury if it is not avoided CAUTION This combination of symbol and signal word indicates a pos sible dangerous situation that can result in minor injury if it is not avoided NOTICE This combination of symbol and signal word indicates a pos sible dangerous situation that can result in material and environmental damage if it is not avoided th mann MUSIC IS OUR PASSION General notes Warning high voltage Warning suspended load Warning danger zone A A A th mann MUSIC IS OUR PASSION Safety instructions 2 Safety instructions Intended use Safety This device is intended to be used in a sound reinforcement system Use the device only as described in this user manual Any other use or use under other operating conditions is consid ered to be improper and may result in personal injury or property damage No liability will be assumed for damages resulting from improper use This device may be used only by persons with sufficient physical sensorial and intellectual abilities and having corresponding knowledge and experience Other persons may use this dev
Download Pdf Manuals
Related Search