Demo Unit User Manual (AADvance Controller) T9300 I/O Base Unit
Contents
1. Demo Unit User Manual AADvance Controller The processor base unit provides the electrical connections between the T9110 processor modules and the rest of the controller modules and has the following connections gt v v v v vY vY Command and response bus connections for up to 48 I O modules Inter processor links Two Ethernet 100 BaseT connectors per processor Two serial data connections per processor Dual 24v System power Ground stud Program enable key The processor base unit holds the IP address of each processor module separately in a BUSP This means that you can remove a defective processor module and install a new one without needing to set up the IP address of the new module T9300 I O Base Unit 3 way The AADvance controller has T9300 I O base units for the I O modules An I O base unit supports up to three I O modules of any type and their associated termination assemblies lt contains a passive backplane that provides the electrical connections between the I O modules and the T9100 processor base unit i e the command and response buses and the system power Document 553850 Issue 1 2 March 2011 The bus and power connections from the processor base unit enter the backplane at the left connector and are routed direct to the module connectors The backplane provides a connector at the right for the next I O backplane The connection to the left of the backplane can connect to a processor base unit or2. another I O base unit Adjacent base units clip together and are held in position by a plastic retaining clip Alternatively rows of I O base units can be connected together using a T9310 expansion cable assembly Document 553850 Issue 1 2 March 2011 1 9
Download Pdf Manuals
Related Search