Vista 200 UG - Florence Inc.
Contents
1. 4 6 7 9 8 5 Installing Your Vista 200 Phone Wall Mount Wall Mount Connect the receiver and receiver cord Attach the wedge shaped base in desk mount or wall mount position Connect the line cord Connect the power adaptor Attach the language faceplate Attach the receiver card and lens shiny side down Attach the memory key card and lens after saving numbers and names in memory The lens snaps on and off so you can add numbers When you have power When you plug in your new phone you may see a message on the display ask ing you to make a language selection Read the directions on the display to select one of two languages Vista 200 also runs a test to ensure that the phone cords are connected properly If the test fails the display will prompt you to check the phone cords Make sure all connections are fastened securely Fit the Discovery Card on the phone To find the OPTIONS key slide the panel 3 1 For wall mounting we recommend that you use a wall mounting plate which your local telephone company can install The excess line cord fits into the stand of the phone Desk Mount 2 1 When your phone is connected Once the installation and the power up sequence are complete your phone is ready to make and receive calls2. 6 More about the display messages If you subscribe to voice messaging If your telephone company offers voice messaging supported by visual message waiting the Vista 200 s light will flash slowly and Message Waiting may appear on the display unless other messages have priority When another person uses an extension Vista 200 s light comes on and Extension in use appears on the display when another person in your home picks up an extension The light remains on until the other person hangs up This message also alerts you when someone accidentally leaves an extension off the hook How to turn off the ringer volume If you don t want your phone to ring you can turn the ringer off Press the left side of the volume bar volume bar icon without lifting the receiver Ringer is OFF may appear on the display unless other messages have priority To turn the ringer on again press the right side of the volume bar volume bar icon without lifting the receiver How to adjust your phone s volume Changing the volume of your caller s voice While you are talking on the phone you can press the volume bar volume bar icon to the right for a louder volume If the caller s voice is too loud press the bar to the left for a softer volume The phone returns to a normal volume when you hang up Changing the volume of your phone s ring While the telephone is ringing you can press the volume bar volume bar icon to the left f
3. 8 What do I do if there is no dial tone Read the display If the line cord is not attached properly the display will prompt you to check the phone cords Also make sure the receiver cord is attached securely If the telephone doesn t ring Ringer is OFF may appear on the display The ringer may be turned off Without lifting the receiver press the right side of the volume bar volume bar icon to turn the ringer on You can adjust ringer volume and tone using option 3 in the OPTIONS list If I cannot hear a caller or be heard Make sure the receiver cord is inserted securely into the jack If the display is blank and ringer volume is very low Make sure the power adaptor is plugged in a working electrical outlet If the display is in the wrong language You can change the language by pressing the OPTIONS key and then pressing 1 1 If the light stays on when features are not in use You can turn the light off by pressing the OPTIONS key and then pressing 4 4 If numbers cannot be saved or erased on the memory keys Your memory keys may be locked Without picking up the receiver press the OPTIONS key press HOLD and then press to unlock the memory keys If callers are not identified on the display Until you subscribe to Call Display from your local telephone company your telephone will not receive the number and name if available of a caller If Call Display shows Unknow
4. 2 Speak to your new caller 2 Wait for a dial tone Call the third party 3 To return to the first call press 3 When the third party answers press LINK The second call is on hold To LINK to reconnect the first call All three alternate between calls press LINK parties are now connected to the call Calling the last number you dialed If a number is busy the first time you call pressing REDIAL redials the number To call the last number you dialled 1 Press REDIAL The last number you called is dialled automatically Calling the last person who called you If you subscribe to Call Display the RECALL key records the number of the last person who called you To call the last person who called you 1 Press RECALL The phone automatically dials the last number you dialled Using Link Hold ReDial and ReCall 5 Vista 200 remembers the numbers of up to 15 incoming calls These numbers are stored in the Callers List This feature lets you review your calls and then dial them automatically from the list Your telephone records the number and name if available of the caller the time they called and the number of times each caller has tried to reach you You can choose to have your phone record information for all incoming calls or only for calls you did not answer Item 6 on page 8 gives more details Using the Callers List P
5. If the display is hard to see you can adjust it A button to the right of the display lets you control the contrast for easy reading in different lighting conditions How to adjust the contrast 1 Press the CONTRAST button repeatedly until the display is easy to read When to set the time and date If you subscribe to Call Display you do not have to set the time and date The current time and date appear automatically when the first call comes in If you do not subscribe set the time and date manually using the steps below How to set the time and date 1 Don t pick up the receiver 2 Move the sliding panel below the display and press the OPTIONS key 3 Press 2 2 on the dial pad 4 Use the dial pad to type the hour Then press SAVE 5 Type the minutes and press SAVE 6 Press for am or for pm 7 Type the month eg 1 for January 2 for February 3 for March Press SAVE 8 Type the day eg 7 12 31 etc Press SAVE The current time and date will appear on the display Tips for setting the time and date Setting the time and date is easier if you write them down first in this order hour minutes am or pm month as a number day as a number If a number is already correct you can press SAVE to skip to the next item If you make a mistake and want to start over lift the receiver then hang up Discovering Vista 200 The Discovery Card lets you use your new telephone right awa
6. arrow gt to start a new letter For example to enter the name JEAN you would follow these steps For J press 5 then press gt for E press 3 3 then gt for A press 2 then gt for N press 6 6 If you wish to change a letter after you ve entered it press lt to erase it 2 When the name is complete press SAVE to save the name To erase the contents of a memory key 1 Press the memory key to see its contents 2 Press then again to erase You can also save new numbers over old ones To program a pause into a number to receive a second dial tone on PBX systems 1 When you save the number on a memory key press HOLD where the pause should occur for example 9 HOLD 800 555 1212 Letter Chart A 2 D 3 G 4 J 5 M 6 P 7 T 8 W 9 B 2 2 E 3 3 H 4 4 K 5 5 N 6 6 Q 7 7 U 8 8 X 9 9 C 2 2 2 F 3 3 3 I 4 4 4 L 5 5 5 O 6 6 6 R 7 7 7 V 8 8 8 Y 9 9 9 S 7777 Z 9999 Saving frequently called numbers in memory 3 If you subscribe to Telephone Company Services You can save codes for telephone company features in the phone s memory keys for easy access Some services need only an ON code while others like Call Forwarding require both ON and OFF codes If you need both codes you can save the ON code in one memory key and the OFF cod
7. you see who s calling before you answer the phone If you subscribe to Call Display the caller s telephone number and name if available appears on the display while your phone is ringing A new lease on services All of the Vista telephones work with the call management services available from your local telephone company Vista 200 was specially designed to make it easy to use these services The phone also works with your tele phone company s new messaging services Your phone company can provide details Want to learn more This guide can give you more details on using the phone s features Setting up your phone 1 Using the Callers List and Display 6 Setting the time and date 2 Voice messaging and other messages 7 Saving numbers in memory 3 Adjusting the ring and receiver volume 7 Saving subscriber services 4 Personalizing your phone 8 Using Link Hold and Redial 5 Questions and answers on Vista 200 9 A phone so advanced it s simple Vista is a Trademark of Aastra Telecom Until you subscribe to Call Display or Caller ID or until your Centrex system provides a Call Display Caller ID feature the number and name if available of the caller will not appear on the display The name for this service may differ in your calling area
8. While they are locked you can still use the memory keys to place calls but you will not be able to erase the keys or save new names and numbers To lock your memory keys To unlock your memory keys 1 Don t pick up the receiver 1 Don t pick up the receiver 2 Press the OPTIONS key 2 Press the OPTIONS key 3 Press HOLD 3 Press HOLD 4 Press 4 Press Subscriber services saving feature codes in memory keys 4 Stopping your conversation temporarily HOLD lets you interrupt your conversation for a short time or continue your call at another extension without losing the call To move to another phone To interrupt your call for a short time 1 Press HOLD 1 Press HOLD 2 Hang up the receiver 2 Hang up or set the receiver on a table 3 To resume your conversation 3 To resume your conversation pick up the receiver at an if you hung up pick up the Vista receiver extension telephone if you didn t hang up press HOLD again Connecting other callers LINK connects you to callers when you subscribe to services such as Call Waiting or Three Way Calling from your telephone company When you hear a Call Waiting tone To connect a caller for Three Way Calling 1 Press LINK This puts your 1 Make your first call as usual Press LINK current call on hold This puts your original call on hold
9. e in another To program a light with ON and OFF keys You can program Vista s light to work with the ON and OFF keys the light will come on when you press the feature ON key to show that the feature is in use When you press the OFF key both the light and the feature will turn off togeth er The light can be assigned to work with one pair of feature codes only Here s how to save a feature ON and a feature OFF key with a light If you wish to program an ON and OFF key without the light skip step 2 To save an ON key for a feature To save a OFF key for a feature 1 Press SAVE 1 Press SAVE 2 Press 1 to turn the light ON 2 Press 0 to turn the light OFF 3 Press the desired memory key 3 Press the desired memory key 4 Enter the telephone company code 4 Enter the telephone company code for turning ON the feature such as for turning OFF the feature such as a a Call Forwarding ON code Call Forwarding OFF code Read the display to confirm the number Read the display to confirm the number 5 Press SAVE again 5 Press SAVE again 6 Write Call Forwarding ON on the 6 Write Call Forwarding OFF on the memory key card in pencil memory key card in pencil Contact your local telephone company for more information about feature codes and how you can subscribe to services To Protect the Contents of Your Memory Keys For security or child proofing you can lock the contents of your memory keys
10. n number Information about the call is not available This is not a fault with the phone If I press CALLERS and the display shows List is empty Until you subscribe to Call Display your telephone will not record incoming calls Your telephone company can provide information on this service If you use a message machine it may be answering before the second ring when calling information is delivered Your phone may be set to record unanswered calls calls answered by a message machine are counted as answered Will the phone still work if there is a power failure Yes Vista 200 will still operate as a regular telephone during a power failure but the display will not operate until the power is restored If all else fails your local telephone company will be happy to help you Easy solutions to common problems 9 Your new Vista 200 phone is part of a family of telephones that give you the flexibility you need for today s busy lifestyle plus the reliability you need to stay on top of your calls A display that guides you step by step Perhaps Vista s most exciting feature is its display The display shows messages to guide you step by step through all the functions of the phone Just follow the directions for making or receiving calls and using features A new point of view Answering the phone doesn t have to be a surprise Vista 200 s display lets
11. o hear each remaining tone While you are using this option you can also adjust the ringer volume by pressing the volume bar volume bar icon below the dial pad When you are satisfied with the ring tone and volume press SAVE to keep your choice 4 Turn light OFF Page 3 of this guide shows you how to program a reminder light to come on with a feature If you don t want the feature light to stay on you can go to this option and press 4 to turn the light off 5 Your Area Code If you don t want Call Display to show the area code of local calls press 5 when you see this message Then enter your 3 digit area code and press SAVE The phone will remove your area code from incoming local calls 6 Change Callers If you subscribe to Call Display a Callers List records the numbers of up to 15 incoming calls When you see this message you can program your phone to record all incoming numbers or only numbers from calls you didn t answer Press 6 Then press to save all calls or to save only unan swered calls 7 Add TIMER key When you see this message you can program a timer into a memory key to show the length of your calls Press 7 Then press the memory key where you want to save the timer Press SAVE Now when you press the programmed mem ory key the timer will come on To turn the timer off press the memory key again Personalizing your phone with Vista s options
12. or a softer ring or to the right for a louder ring The ring will stay at this level after you hang up You can also adjust ringer volume and the type of ring in the OPTIONS list as long as the ringer has not been turned off Page 8 item 3 gives instructions for choosing a ringer tone and volume 7 About the Vista 200 Callers List Vista has seven options to let you customize your phone An OPTIONS key is located behind a sliding panel below the display Figure 9 page 1 To see the option messages slide the panel open and press the OPTIONS key Then press the down arrow key to move through the list You can change any of the options by following the change procedures below 1 In French If the language has been changed you will see Anglais Vista 200 shows you messages in one of two languages You can change from one language to the other by pressing 1 when you see this message 2 Set time date When you see this message you can set the time and date See page 1 for step by step instructions You may have to reset the time and date after a power failure If you subscribe to Call Display the current time and date appear automatically when the first call comes in otherwise it must be set manually 3 Set Ringer You can choose one of four different rings for your phone When you see this message press 3 to hear the first tone Then press down arrow t
13. ress CALLERS to see the list Press lt gt to switch between the number and the name of the caller Press down up arrow to move down and up the Callers List You can return a call automatically by pressing DIAL while the caller s number is on the display You can erase a single caller from the list by pressing then again You can erase all of the callers by pressing when XX callers is displayed Saving a number from the Callers List to a memory key Names and numbers from the Callers List can be saved directly onto a memory key by following these steps 1 Press SAVE while the number is still shown on the display 2 Press the memory key where you want to save the number Callers List Display Messages Message What it Means N E W First time a call has been shown on the display OLD The call has already been viewed The call has been dialed XX calls bumped This number of old calls have been automatically removed to make room for new incoming calls Private number The caller has requested that this number be blocked Unknown number Information is unavailable Long distance The call originates outside your local area lt The call was forwarded from another location 1 New Caller A new caller has been added to the Callers List _555 1440 Lets you add a number or delete an area code About the Vista 200 Callers List
14. y by telling you what the keys do and how to use them Place the card on the phone then experiment by pressing various keys and reading the display The Discovery Card will help you become familiar with the many features of your new phone fast Setting the time and date 2 You can save emergency numbers and phone numbers of your family and friends in Vista s ten memory keys You can also use the dial pad to save a name with each number If you subscribe to Call Display your phone will show the name you ve entered along with the incoming number How to save a number in a memory key 1 Press SAVE 2 Press the memory key where you want to save the number 3 Use the dial pad to enter the number For example to save 555 1440 press 5 5 5 1 4 4 0 on the dial pad 4 Press SAVE 5 Press SAVE again to quit OR use the optional steps below to add a name 6 Write a name or number next to the memory key on the memory key card in pencil How to save a name when you save a number 1 To enter a name follow steps 1 5 above then use the keys on the dial pad to add a name In most cases press once for the first letter on a key twice for the second letter and three times for the third S and Z need four key presses The chart at the bottom of the page shows which keys to press for each letter When you finish a letter press the
Download Pdf Manuals
Related Search