User Manual
Contents
1. Press SET key to confirm and exit To Remove Page number please repeat step 1 and press DEL CALL TRANSFER BETWEEN PARALLEL PHONES gt Transferring an Incoming Call to paralleled phones with Intercom When a call comes pick up handset or press H F button from the first unit then Press and paging number 1 or 2 that was set in the second unit and that unit will ring Pick up handset or press H F key on the second unit to have intercom conversation Outside caller first unit user and second unit user will be connected with each other in conversation First unit user may disconnect the call so the second unit user and outside caller can continue the conversation or vice versa Important Notes e Only incoming calls can be transferred using this function e Please use same model phones to use the above Call Transfer features If different model phone is connected in parallel page number cannot be set and only can transfer calls from that different model phone to the model referred in this manual and intercom during may not be possible in certain cases e If the paging number is set Anti steal dialing function will not work e This feature will work only on regular PSTN networks e Any special services starting with offered by your Telephone company may not function properly Please deactivate Call Transfer function before using those special services Example Phone banking service which prompts you to press fo2. Repeat the above steps for date and time setting Setting Local Area Code and Long Distance Code MV OM ee Ms distance code 0 flashes 2 Press A or W key to edit the flashing code 3 Press SET key to confirm and enter the next flashing code setting 4 Repeat the above steps for the rest code setting gt Adjusting LCD Contrast 2 3 Press A or W key to adjust the LCD contrast total 16 levels can be selected Press SET key to confirm and exit At on hook state press FLASH key to enter LCD contrast setting directly then press FLASHI key continuously to adjust the LCD contrast gt Setting Alarm Clock 1 In on hook state press ALARM key once LCD displays 12 00 AL1 5 2 Press A or W key to select ON or OFF LCD displays ALM icon when the alarm is set to ON 3 Press SET key value 12 starts to flash 4 Press A or W Key to set the alarm hour and press SET key to confirm and enter alarm minute setting 5 Press A or W key to edit alarm minute and press SET key to confirm and go to next group alarm clock setting 6 Repeat the above steps to set additional alarms NOTE The first 3 groups alarm clock will be repeated periodically every day while the last 2 groups alarm clock is effected one time SETTING PAGE NUMBER FOR CALL TRANSFER gt Setting paging number for phones connected in parallel Key in oe and paging number example 1 or 2 use DEL key to edit
3. key is used as sign of positive or negative Eg 1 10 26 2 1 In on hook state press CAL key 2 Press 1 0 2 6 2 keys 3 After calculated press SET key to quit Eg 2 0 5x 0 6 1 1 In on hook state press CAL key 2 Press 0 4 5 X 0 6 H 1 keys 3 After calculated press SET key to quit NOTES Please unplug telephone line and power if any when installing replacing batteries TROUBLESHOOTING No voice Check if the handset is on the phone or if the line has terminated Receive only Check if P T mode is properly set Check if the unit is locked use the key to unlock it Rusty batteries or leakage Remove the rust or wipe away the leakage Noise Check if the connector is wet or rusty Change the connector Ring once then disconnect when receiving a call Dialing function is still available Check if connector is in a moist environment Check if too many extensions are used together or the quality of extension is not good enough Change the bad extension LCD become dim Check if LCD contrast is properly set or if the batteries are weak Adjust LCD contrast if the LCD is still dim replace the batteries No ring Check if the RING tone is in the OFF state reset it Most of the functions failed Check if the batteries are strong en
4. ON MUSIC gt Hold music selection There are 3 kinds of hold music for selection 1 At off hook state or hands free press HOLD key 2 Press OUT key to select the desired hold music It plays the music at same time 3 Press A or VI key to select the 4 steps volume of hold music 4 Press HOLD key to quit gt When talking over handset press HOLD key to enter the hold mode and the hold music is sent out In hold mode 1 Press HOLD key to release hold mode and continue to talk over handset 2 Or hang up handset it enters hands free hold mode 7 gt When talking at hands free mode press HOLD key to enter the hold mode and the hold music is sent out In hold mode 1 Pick up handset to talk over handset 2 Or press H F key to quit hold mode and talk at hands free mode ONE TOUCH MEMORY OPERATION gt Store the number in one touch memory 1 Pre dial the desired number or checking incoming and outgoing number that you want to store 2 Press STORE key 3 Press Mi i 1 3 key gt Make a call from one touch memory In off hook or on hook situations press Mi i 1 3 key to dial the stored number out TWO TOUCH MEMORY OPERATION gt Store the number in two touch memory 1 Pre dial the desired number or checking incoming and outgoing number that you want to store 2 Press STORE key 3 Press one of digit keys 0 9 gt Make a call from two touch memory In off hook or at hands free state press STORE key digit ke
5. the handset When you hear the dial tone dial the desired number The unit will start to time the conversation after 6 seconds When finished return the handset to the base 3 From H F mode Press H F key When you hear the dial tone dial the desired number The unit will start to time the conversation after 6 seconds When finished press H F key again Pre dialing function When the handset is on the base dial the desired number If there are mistakes use the DEL key to edit Press H F key or pick up the handset and the number will be dialed automatically Redial Pick up the handset or press H F key Press REDIAL key the last dialed number will be dialed again Auto redial Press H F key dial a number if you hear an engaged tone Ne IS ER N y Gy Press ARD key and the last dialed number will be redialed automatically at every 9 10 seconds until the line is through 3 The phone will redial the same number automatically for 32 times When there is an incoming call while using auto redial pick up the handset or press H F key to answer the call The auto redial function will be terminated REVIEWING CALLING BACK AND DELETING INCOMING NUMBERS gt Reviewing In on hook state press A or W key to scroll and review the numbers gt Deleting When the desired number is shown press DEL key the number is deleted Press and hold DEL key for 3 seconds all the incoming numbers are deleted gt C
6. ALCOM Quality lifestyle Caller ID Telephone AT6039 USER S MANUAL INTRODUCTION Thank you for purchasing our newest Caller ID phone This manual is designed to familiarize you with this phone To get the maximum use from your new phone we suggest that you read this instruction manual carefully before using SAFETY INSTRUCTION When using your telephone equipment the following basic safety precautions should always be followed to reduce the risk of fire electric shock and injury to persons 1 2 Read understand and follow all warnings and instructions Unplug the product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a soft damp cloth for cleaning Do not place this product on unstable surfaces The product may drop causing serious damage to the product 4 Do not overload wall outlets and extension cords as this can result in fire or electric shock 5 Never push foreign objects of any kind into this product through cabinet slots as they may affect dangerous voltage points or short circuit parts that could result in fire or electric shock Never spill liquid of any kind on the product Avoid moving or disconnecting this unit during a heavy storm as there may be a remote risk of electric shock from lightning and thunder Unauthorized persons cannot open or service even if there is a defect with the unit This will void the warranty please send to service cent
7. alling back 1 Scroll to the desired number press H F key or pick up the handset and the number is dialed out the number is dialed out If the long distance code is set the telephone will add the long distance code ahead the number automatically and then dial back PREVENTING FSK MESSAGE TO AUTO ADJUST REAL TIME When a FSK message comes the unit adjusts real time automatically you can prevent real time auto adjustment as follows 1 In on hook state press and hold ALARM key for 3 seconds LCD displays DATE OFF 4 3 Press SET key to quit NOTE DATE OFF Does not allow real time auto adjustment REVIEWING CALLING BACK AND DELETING OUTGOING NUMBERS gt Reviewing In on hook state press OUT X key then repeat to press OUT X to review outgoing numbers one by one gt Calling back 1 In on hook state press OUT X key to review the desired number then press H F key or pick up the handset and the number is dialed out L_ number is dialed out gt Deleting 1 In on hook state press OUT X key to scroll to the desired number 2 Press DEL key and the number is deleted 3 Orpress and hold DEL key for 3 seconds all numbers will be deleted SETTING MENU gt Setting date amp time 1 In on hook state press SET key the value for the year flashes Press A or W key to edit the year Press SET key to confirm and enter the next value month setting Repeat the above steps for month setting
8. er for any defects FEATURES VV VV VV VV VV VV VV WV FSK DTMF ETSI compatible with auto detection 16 digit LCD display with calendar 99 incoming and 18 outgoing number memories 3 one touch and 10 two touch memories 16 kinds of ringing tone for selection 3 kinds of hold on music for selection Do Not Disturb function Transfer function between parallel phones using 2 similar models Pre dial and edit function Redial and auto redial function 3 step lock function and 5 sets of alarm clock 16 levels of LCD contrast Calculator and key tone function Pulse Tone dialing mode compatible 3 levels of hands free volume for selection Ringing volume 8 steps for selection LCD Backlight Hands free dialing function VV VV In use LED indicator LOCATION DESCRIPTION E EEN EE ol i pee ek RA SIE DEL sie IE ma C IN USE 7 DEL 3 H F UP LCD DOWN M1 69 NUMERICAL KEY 3 M2 8 ARD 8 STORE LINE M3 HOLD CAL 5 ALARM QD FLASHI SET OUT X 2 REDIAL RING GETTING STARTED 1 5 The unit requires 3X 1 5V AA batteries Open the battery compartment cover and insert the batteries in the right polarity then close the cover Proposal using alkaline battery There should be time display on the liquid crystal screen after the batteries are inserted Insert one end of the line cord to the line jack of the base and the other end to the wall outlet of exchanger Connect the handset and t
9. he unit with coiled line Setting the dialing mode to correct mode according to the directions from your local telecom Apply for the caller ID from your local telecom office RECEIVING A CALL 1 When a call comes the telephone rings and LCD displays the seq number of the call the date time incoming number and the NEW icon If the same number is received again and the previous call has not been reviewed the LCD displays REP icon When the incoming memory is full the latest incoming number replaces the oldest number in the memory NOTE For the phone to display incoming number and other information you must have an active Caller ID subscription with your local telephone exchange company 2 Be NE Mc NM IM EEN From handset Pick up the handset and talk to the other party When finished return the handset to the base Switching to H F mode When using the handset press H F key and return the handset to the base When finished press H F key again From H F mode When the telephone rings press H F key and talk to the caller For the other party to hear your voice clearly speak into the speaker from a distance of 32cm or less When finished press H F key again NOTE Generally telecom transmits the incoming message eg Caller ID Info between the first ring and the second ring So please answer the phone after the second ring MAKING A CALL gt Ph OND gt From handset Pick up
10. llowed by some number for choosing language etc ANTI STEAL DIALING FUNCTION 1 In on hook state press and hold key for 3 seconds LCD displays SPI ON 2 Press H F key twice and then When the anti steal is set to ON users who want to dial using an extension to dial via the same line will hear a DI DI DI DI beep continuously and will not be allowed to make a call NOTE If page number is set this function will not work SETTING RINGING TONE AND ADJUST RINGING VOLUME Batteries should be installed in order to hear the ring melody There are 16 kinds of ringing tone and ringing OFF for selection 1 In on hook state press RING key LCD displays ring 02 db8 2 Press RING to select the desired ringing or set ring OFF 3 Press Alt or W key to set ringing volume 4 Press SET to confirm and exit NOTE The volume ranges from 1db 8db with 8db being the loudest Ring OFF is Do Not Disturb mode If the phone is set to this mode the telephone will not ring when there is an incoming call ADJUST HANDSFREE VOLUME In hands free mode press A or W to adjust the handsfree volume LCD displays the volume level and there are a total of 3 levels SELECTING PULSE OR TONE DIALING MODE 1 In on hook state press and hold key for 3 seconds LCD displays P then dialing mode is set as Pulse 2 Press H F key twice and hold key for 3 seconds again LCD displays T then dialing mode is set as Tone HOLD
11. ough Change the batteries If batteries are OK Remove the battery unplug the lines and reinstall after 10 minutes N 49 Note Due to continuous product development all features and specifications are subject to change without prior notice For more Information on Warranty and Product Support in Singapore please call 65 68412668 or Fax to 65 68412628 Email support alcom com sg Website www alcomonline com Please register your warranty online at http www alcomonline com warranty html
12. y 0 9 key the relevant number will be dialed out LOW BATTERY DETECTION When the voltage is lower than 3 9V LCD displays icon to remind the user to replace the batteries LCD BACKLIGHT FUNCTION The backlight is turned on when receiving an incoming call dialing pressing any key or in MUSIC HOLD mode It will fade off if the telephone is left idle for 10 seconds NOTE If batteries are not installed there will be no LCD backlight function FLASH FUNCTION When on a first line Press FLASHI button to answer call waiting line second call Press FLASH button again to get back to the first line LOCK Turn the key to yellow point all numbers are locked except emergency numbers 119 120 122 and 110 Turn the key to green point all numbers starting with O are locked 8 Turn the key to red point all numbers are allowed to be dialed out KEY TONE Batteries should be installed in order to hear the Key tone 1 In on hook state press and hold CAL key 3 seconds key tone is active when hearing di voice 1 Press and hold CAL key 3 seconds again key tone is inactive when hearing di voice CALCULATOR FUNCTION In on hook state press CAL key LCD displays 0 the unit is in calculator state The unit is available for operation of in the calculator state key is used as and the key is used as OUT X and FLASH are used as X and respectively A or W
Download Pdf Manuals
Related Search