User Manual - Get Dash Cam
Contents
1. 2 This device must accept any interference received including interference that may cause undesired operation Note This equipment has been tested and found to comply with the limits for Class B digital devices pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e _Reorient or relocate the receiving antenna e _ Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help2 Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC rules Do not make any changes or modifications to the equipment unless otherwise 8 specified in the manual If such changes or modifications should be made you coul2. 3 5 min 4 System Reset Cancel Execute Device will return to factory settings 5 Light Freq 60Hz 50Hz Choose 60Hz for North America 6 TV Output NTSC PAL Choose NTSC for North America and PAL for all else 7 Date Input To set the date and time highlight Date Input and press the REC SNAP button Use the UP and DOWN buttons to select the proper date and press the REC SNAP button to move on to the month year and time When the date and time are correct press the REC SNAP button one more time to apply these settings 8 USB PC Cam Not applicable Disk Drive Default WARNING THIS DEVICE SHOULD NOT BE ADJUSTED BY THE DRIVER WHILE DRIVING IN THE EVENT OF AN ACCIDENT DEVICE MAY DISLODGE AND BECOME UNSAFE FOR PASSENGERS Notice 1 2 3 4 5 6 7 8 9 Please insert memory card before recording The Original Dash Cam supports memory cards up to 32GB Please attach unit by applying firm pressure to mount before mounting on surface Retro loop video time is one option under the video output menu This function allows the camera to keep filming even after memory full When retro looping is activated old files will be overwritten one by one In order to prevent all videos being deleted at once there are optional retro looping times under the video time settings When the lithium battery is depleted the Dash Cam screen shows Batteries depleted The camera will shut down automatically afte
3. car charger After starting the car the device automatically turns on and enters video mode and will begin to record The device will continue recording while charging When the car is turned off the device keeps working and will turn off five seconds later saving the recorded files automatically if your car s 12V outlet stays active when the car is turned off it is recommended to unplug your Dash Cam before leaving your car Alternatively you can choose to turn the camera off using the POWER button the files will be automatically saved 2 Function introduction This device has three Modes video photo and preview To switch between modes simply press the MODE button A Video mode Memory card must be inserted After pressing and holding the power button or connecting to the car charger the device turns on and enters video mode automatically It will automatically begin to record To stop recording you can press the REC SNAP button or turn off the device by pressing the POWER button Both ways the files will be automatically saved to the memory card B Photo mode Memory card must be inserted After the device is powered on press the MODE button to switch into Photo mode To take a picture simply press the REC SNAP button A photo will be taken and stored on the memory card C Preview mode After the device is powered on press the MODE button twice to enter into Preview mode You can scroll through previews by
4. The Original Dash Cam 4SK98 1 by 4Sight User Manual Thank you for choosing The Original Dash Cam This manual offers detailed information on how to operate the device correctly including how to work the device matters that need attention and technical specifications Please read carefully before use Function introduction 1 Memory Card slot 9 MODE switch modes button recording photo preview 2 Indicator light 10 USB Interface 3 Microphone 11 Lens 4 REC SNAP Confirm Select button 12 Speaker 5 MENU 13 RESET 6 POWER Day Night Mode 14 Bracket slides 7 DOWN Flip Screen must use firm pressure 8 UP Flip Screen 15 2 5 inch LCD screen 16 AV OUT AV output interface Note The POWER button doubles as the day night mode button One quick press of the POWER button changes the camera from day to night mode and activates the device s LEDs To power off the device long press for 3 seconds the power button Note The UP and DOWN buttons double as the device s Flip Screen function When mounting the camera on your dashboard as opposed to the windshield press the UP button to flip the screen and keep your recording right side up When you want to switch back to recording mounted from your windshield use the DOWN button to flip the screen back to normal Note Pressing the MENU button while recording will shut off the Dash Cam s display screen while continuing to record This will allow yo
5. d be required to stop operation of the equipment Canada Industry Canada IC Unintentional emitter per ICES 003 NMB 003 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of Industry Canada Le present appareil numerique n emet pas de bruits radioelectriques depassant les limites applicables aux appareils numeriques de Classe B prescrites dans le reglement sur le brouillage radioelectrique edicte par Industrie Canada
6. ord for 1 minute when it senses motion 4 Video time retro looping Off 1 min 3 min 5 min 10 min 5 Voice record On Off Capture Menu From video mode press the mode button to switch into still photo mode then press the menu button to enter the capture menu 1 Size 3M 2M 1 3M VGA Playback Menu From video mode press the mode button twice to enter playback mode then press the menu button to enter the playback menu 1 Delete Cancel Execute 2 Lock Unlock Lock One Lock All Unlock One Unlock All i When Lock One is selected the file that was on screen when entering the menu becomes locked and unable to be deleted ii When a file is locked and you wish to unlock and delete it simply browse to the desired file on screen enter the Lock Unlock menu and select Unlock One the file onscreen will be unlocked and can now be deleted 3 Thumbnail Cancel Execute i Selecting Execute in this option allows you to view your stored files in a thumbnail view and to navigate to a specific file ii Use the UP and DOWN buttons to navigate to your desired file To enter the Setup Menu simply press the MENU button from any of the previous menus Setup Menu 1 Format Cancel Execute 2 Language English French German Italian Spanish Portuguese Simplified Chinese Traditional Chinese Japanese Russian Korean 3 Auto Off Off 1
7. pressing the UP and DOWN buttons The 4 REC SNAP button is used as the play pause button for video previews Press it once to play a preview press it again to pause the preview D Delete function Enter preview mode Press the MENU button to open the menu Be sure the Delete option is highlighted use the UP and DOWN buttons if not highlighted Press the REC SNAP button to choose the highlighted option in this case the Delete option Use the UP or DOWN button to highlight execute Press the REC SNAP button and it will delete the file that was on screen when entering the menu Caution when selecting the delete file option the file that was open when entering the menu is deleted 3 Settings Menu functions After the device is powered on stop recording by pressing the REC SNAP button then press the MENU button to enter the settings interface Use the UP and DOWN buttons to scroll through this interface To choose the highlighted option press the REC SNAP button Use the UP and DOWN buttons to highlight your desired setting and press the REC SNAP button to assign this setting to the device Press the MENU button twice to exit the menu screen Video Output Menu 1 Resolution 720p 1280 x 720 HD VGA 640 x 480 2 Time Stamp Off On 3 Motion detection On Off While the device is powered on and motion detection is set to on the motion detection system will cause the Dash Cam to automatically rec
8. r 20 seconds and save the files automatically If you need to reset the Dash Cam press the RESET button for 3 seconds If device is displaying in another language follow these steps a Power on device b Press the Rec Snap button to stop recording c Press the Menu button device enters Video output menu d Press the Menu button again device enters Setup menu e Press the Down button once and then press the Rec Snap button this brings you to the language menu f Use the Up or Down buttons until your desired language is highlighted g Once your desired language is highlighted press Rec Snap to set the unit to the highlighted language For a larger manual size please visit www GetDashCam com to download and print We are continually making improvements to our instruction manuals the most up to date version will always be posted on www GetDashCam com Operational Tip If your Dash Cam is not working properly please follow the below step Slightly press the RESET hole with a pin to have the unit restart and it should resume functioning properly FCC STATEMENT FCC declaration of conformity Responsible party 4Sight LLC 12285 Colony Ave Chino CA 91710 714 988 5838 Fax 714 285 5828 This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and
9. u to save battery power Press the menu button again to turn the display screen back on 2 Included with your Original Dash Cam e Dash Cam e User manual Windshield mounting bracket e USB Cable e AV line Car charger with 12 v 24V to 5V voltage converter e Flash Memory Card Recommended Recording Angle When setting up your Dash Cam to record it is recommended that you set it up at approximately a 15 downward angle This will help reduce glare on the camera s lens Operating Your Device 1 Charge mode A Using the built in rechargeable lithium battery Charging options 1 connect it to the car charger 2 connect it to your computer with the USB line When first connecting to the computer with the USB line the unit powers on and displays a computer with the USB symbol displayed on screen o To indicate the unit is charging the indicator light on the bottom of the unit displays a blue and red light combines to purple o When the unit is fully charged the light changes to display only the 3 solid blue light the red light will not be lit up o Note While connected to your computer via the USB cable do not press buttons on the camera When charging through the car charger in the battery display icon on the top left of the screen a charging lightning bolt will appear indicating the device is charging o Note For first charge a minimum of 6 hours is recommended B Connected device to the
Download Pdf Manuals
Related Search