User manual
Contents
1. N 15 12 5 Dari en eek 15 12 5 t FAI A ___ gt 15 127 Service MUNGUONS ae cce estate 16 Ir EDI edi 16 12 72 OEO factory delatae esten 16 13 Mode met 16 151 obandalenemode Auto MOGdG ui e preterea Helles 16 13 2 Master Slave ses 16 139 DMX 16 2 21 VARYTEC 14 19 16 DMX Values Spot 19 channels lee DMX Values Wash T2 chanlTels uar coo Cod ape Technical data 3 21 VARYTEC 1 Safety Information e Theusage of this device is only allowed for indoor use e he warranty expires in case of manual changes at the device by the user e he device may only be repaired by professionals e Only use fuses of the same type as the original and only use original spare parts e To prevent fire and electric shock protect the device against rain and humidity e Disconnect main power plug before opening the casing 1 1 Hints for safe and faultless use Care of heat and high temperatures Place the device where it is not exposed to extreme temperatures humidity or dust Only use the device in ambient temperature between 5 C 41 F 35 C 95 F Protect the device against2. VARYTEC Index 1 Salet oom 4 1 1 Hints for safe and faultless 4 25 m 6 Controllable e 6 22 JAdditional TealUl6S cdeveetiluesatkis pande ee 6 Ox 6 ee a Seen E 7 8 55 rc 9 Change mternal FUSES insetti pt ann 9 922 9 o DMX Data CADIE etu tait er e uelut catus 10 5 Gable CobneclotS usu uem uM MED Ua Mt 10 0 2 3 Pole Ad aD tea at 10 TEMA CONTIGUPATON OF 11 8 Master Slave Inking thedevices ead oder re Dee ee 12 oper 12 9 1 NERUN 12 9 2 ran 12 10 Operation 13 10 1 Navigate in ee d ex ele enc ase oco cb i d 13 11 VIERLFOVENVIEWe 14 12 15 1251 ___ ______ _______________ 15 122 Ip 15 123 EET 15 124 Select Pune
3. SEES 22 io 12 B Hz AC or 230V 50Hz 2A250V 68 1W 0 60A 120V ene 83 6W 1 41A inrushat 120 el G2 1 14W RGB 50 000hrs 100 fe 1 076 lux 540 104 40 C 2s locking 3 pin male socket oo locking 3 pin ALR female socket pin 1 shield pin 2 pin 3 DMX 512USITT OF 13 VARYTEC Importeur amp Braun GmbH Industriestra e 2 D 76307 Karlsbad www bkbraun com info bkbraun com X RoHS um 21 21
4. respectively to maintain the device e Always use safety steel cables e Never place the device at locations where it is exposed to rain high temperature changes or humidity 12 21 VARYTEC 10 Operation settings 10 1 Navigate in the control display To adjust the functions use the 4 buttons below the display Button Function Used to access the menu or to return to a lt MODE ESC gt previous menu option lt UP gt Scrolls through manu options in ascending order lt DOWN gt Scrolls through menu options in descending C order MODE ESC UP DOWN ENTER lt Used to select and store the current menu ENTER or option within a menu 13 21 VARYTEC 11 Menu overview Use MODE ESC button to scroll throug these menu items 14 21 Use the UP DOWN and lt gt buttons 10 scroll through these menu Lara When navigating the menu Use the UP buttonto move up Use the DOWN buttonto move down Use the ENTER buttonto move right Use the MODE buton to move left or to scroll through the left most items inthe menu map VARYTEC 12 12 1 12 2 12 3 12 4 12 5 User adjustments Invert pan Press the MODE button until PAN or PAN appears in the display Use the UP DOWN buttons to select the requested adjustment and then press enter Invert tilt Press the MODE button until t iL or rt iL appears in th
5. two or more devices However you can run the devices also by master slave control The maximum quantity of devices in this mode is given by the maximum usable channels of DMX512 The addition of all fixture channels must not be higher than the maximum channels of DMX512 Important Devices which are controlled by DMX512 are connected by a serial cable For a proper operation the EIA 485 provides to run not more than 32 devices in one DMX line If you want to use more than 32 devices you need to use a DMX splitter Maximum recommended link distance 500m Maximum recommended devices in on DMX line 32 9 21 VARYTEC 6 DMX Data Cable Only use a cable which is conforming to the RS 485 standard Standard microphone cable cannot transfer DMX signal correct over long distances The cable should fulfill following requirements 2 conductors ground 3 pole Maximum capacity between conductors 30pF ft Maximum capacity between conductor and ground 55pF Maximum electric resistance 20 Ohm 1000ft nominal impedance 100 140 Ohm 6 1 Cable connectors The cables must have a male DMX connector on one side and a female on the other side Pin assignment COMMON Attention Avoid contact between common and the ground of the device This could produce a ground loop and your device could react irrationally Test the function of the cables with a cable tester before usage 6 2 3 pole 5 pole adapter If you use a c
6. auto mode choose NASL The display shows SLoW 13 2 Master Slave mode This mode allows to link up to 32 devices and to use them without DMX controller 1 Use standard DMX cables to connect the devices to each other It could be useful to use a DMX terminator after last device in the DMX line 2 Setthe first device in the DMX line as master Choose NAFA NASL or NStS depending on which program you want to use Master auto NAFA or NASL Master sound to light NStS SrUn appears in the display Setall the other devices to slave mode Select SLAv in the menu with the UP DOWN buttons They will react like the master Slave SLAv will be shown as Son in the display 13 3 DMX mode In this mode you can control the device by every usual in trade DMX controller The default address is 001 and will be shown in the display as 9001 Adjust the addresses of the devices according to the addresses which are adjusted at the controller 16 21 VARYTEC 14 CHANNEL 134 135 239 au 992 105 106 710 218 231 30 55 DMX Values Spot 13 channels vaiuE FUNCTION Pan Pan Fires THE Tut Pink Speed Normal Shere Dimmar 190 0 Strobel are hati Open 100 Graan 2100 Bun 2217121 Macros NaFuncton White Hed Green Bus Magenta Drange Chami ouia Pin
7. e GORD Shake Poesie rainbow eflecterith increasing Nagatwa effactwithi perd 48 55 CHANNEL WALDE FUNT TION 1 000 255 2 000 755 Do8 021 034 Db 040 050 053 4 077 078 051 032 105 106 119 120 133 134 147 148 16 162 175 176 180 190 203 AO 217 218 221 22 ex 253 000 007 Til Dimmer amp tabe Diosmi 19 95 fasi Color Macros unctinn While Orange Charireusgs Pink Brown God Crimaon V ioa Crane Macro 19 21 VARYTEC 16 Technical data WEIGHT amp DIMENSIONS Length M Height Weight POWER Swilch selectable power XR Fuse Power Consum ption eie Inrush Power Power Faclor LIGHT SOURCE PHOTO Beam Angle luminance al 1M RANGE ccc DMMECRRTXT E A a had erar THERMAL Maximum 22222 5 2 CONTROL amp PROGRAMMING Data input Data output Data pin con figuration Proton AT Ee OMX Chan nels 20 21 6 B in 173mm v 6 8 in 173 mm vee 8 8 in 249 mm Muni
8. e display Use the UP DOWN buttons to select the requested adjustment and then press enter Flip display Press the MODE button until iS or rd iS appears in the display Use the UP DOWN buttons to select the requested adjustment and then press enter Select DMX mode Press the MODE button until 12CH or 4CH appears in the display Use the UP DOWN buttons to select the requested adjustment and then press enter Adjust maximum pan range Press the MODE button until 54 6 or PA18 appears in the display Use the UP DOWN buttons to select the requested adjustment and then press enter Adjust maximum tilt range Press the MODE button until 27 118 or Ti9 appears in the display Use the UP DOWN buttons to select the requested setting and then press enter 15 21 VARYTEC 12 7 Service functions 12 7 1 Reset device 1 Press the button until rESt appears in the display 2 Press enter 12 7 2 Set to factory default 1 Press the button until LoAd appears in the display 2 Press enter 13 Mode of operation 13 1 Stand alone mode Auto Mode This mode allows to use the device without DMX controller by pre programmed movement included two speed options 1 To configure the device for fast auto mode choose The display shows FASt 2 To configure the device for slow
9. k Brown told Crimson Virol m Colgr Change Macro verlor Speed Color Mowe mae mi Macros Program 1 Agta Program 2 Auta Program 3 Auto Program 4 Auta Program Auta Program 6 Program7 Auto Program B Sound amp ct va SoundActva 2 Sound Achwo 4 SoundAcvo 4 4 SoundActwe 0 T SoundActvn 8 Gaba 222 8 18 18 23 24 31 22 39 13 eo 45 55 64 71 72 79 BO 94 GOBO Shake 85 108 GOBO2 Shake 110 124 GOBO3 Shake 125 139 GOBO4 Shake 140 154 GOB Shaka 155 169 GOBOS Snake 170 184 GOBOT Shake 185 199 Shake 00 214 Shake 218 235 rainbow effactwiei apes 230 259 galive rainbow Marana epeed 17 21 VARYTEC 15 DMX Values Wash 12 channels CHANNEL VALUE FUNCTION 5 2 m00 255 Pan Fine 4 Ta Fine amp 000 255 wVnrinrEmngsd N arma trabe QUE G7 DOR 134 100 05 amp 135 230 sew last 2 255 Open 8 D 100 9 0900 255 D 1005 Com Macros OU 007 unctona 022 134 Rind 034 046 050 053 Bluse Old DOTT Cyan Ors eg Ma gena 092 105 Yellow 105 1189 120 133 134 147 Charirouse 148 2151 162 175 Brown 175 1855 God 203 Cn
10. mson 217 Vine 18 211 C npe 714 255 Color Change 11 000 255 Vecio Speed mar Mowe rent 000 toe OS 122 Aula Progam 1 Of 037 Adio Progam 2 034 057 Auto Program 3 053 087 Auto Program 4 Ce 082 Programs 08 087 Auto Program 6 096 112 Progam T 12 1132127 Auto Program 128 142 GoundAchvei 143 157 SoundAcive 2 155 172 Sound Aciwe 3 1739 187 Sond Aciwe 4 188 202 Sound Acwe 5 203 217 Sound Aciwe 6 218 232 Sound 2339 255 Sound Active 18 21 VARYTEC DMX Channel Values 5 Channel for Spot CHANNEL VALUE FUNCTIOH 1 255 Pan al QU 255 Til 050 Claaed 124 3 135 233 Strobetsi w a0 m 255 Calor Mazraa 007 Hofu iga Hg no Ule 034 036 045 Green 085 3 an ha 07T Cyan 091 Mia Faz 105 Wo Tow 110 Pupe 1209 133 Orange 4 134 147 349 161 1824 175 176 180 20 eames 218 231 adde 255 94 85 109 11051024 125 139 140 154 155 169 170 154 185 199 290 214 215 235 238 255 DMX Channel Values 4 Channel for Wash 40 47 5 85 284 7 1 Siete FOBRO Shake Shae GOBCH S ake 50805 Shake GOBOS Saks 20609 Shak
11. ontroller with 5 pole output you need a 3 pole to 5 pole adapter The list below shows a possible configuration 3 pole female output 5 pole male Input Dua ZU ix NNNM ponte MN 10 21 VARYTEC 7 Configuration of Connection 1 Connect the 3 pole connector of the DMX cable with the 3 pole output of the controller 2 Connect the female connector of the cable with the input of the first device 3 Then go on by connecting the output of the device with the input of the next device Universal DMX Controller 000 LL M On o 914 y OUT OMX IM N This drawing providesa general illustration ofthe DMA Input Output panel of a lighting fixture Continue the link 11 21 VARYTEC 8 Master Slave linking the devices 1 Connect the 3 pole male connector of the DMX cable with the 3 pole output the first device 2 Then connect the female connector of the cable with the input of the second device Then go on by connecting the output of the each device with the input of each next device 9 Setup 9 1 Orientation The fixture can be used in every position as long as enough ventilation is given 9 2 Rigging It is important that the ventilation doesn t get limited Only use fitting or O clamps for hanging devices Loosen the clamps adjust the angle of the devices and tighten the clamps again e Select the place of rigging that you are able to change the illuminant
12. r Adjustable speed for Pan Tilt color mixing and color presets Pre programmed movements controlled by DMX or master slave mode 2 2 Additional features The user can select between basic and advanced mode Selectable pan and tilt range Pan 540 360 180 Tilt 270 180 90 Compact and light LED display with rotatable menu Function to reset the device to factory settings Automatic on off function for the display Invert Fan cooled 6 21 VARYTEC 3 DMX channels 12 channel mode for wash light 13 channel mode for spot Speed pan tilt Speed pan tilt 4 channel mode for wash light 5 channel mode for spot 5 A LM 8 7 m mo 7 21 VARYTEC 4 Product overview Focus Projector Head LED Readout Control Panel DMA In F7 DMX Out IEC Power oy Connector with _ ee Fuse holder Rear Voltage Selector L_ _J 9 Switch Controller rear Input rear 8 21 VARYTEC 5 Technical specifications 5 1 Change internal Fuse 4 Disconnect the powercord before replacinga fuse and always replace with the same type fuse Push out the fuse holder with screwdriver Exchange the fuse only by one of the exact same type Push the fuse holder back on its origin position and connect the mains cable to the socket again 5 2 Link devices You need 3 pin DMX cables to realize a lightshow with
13. sunlight and sources of heat Protect the device against humidity water and dust The device should be place where high humidity does not dominate Do not place liquids on or next to the system Only place the device on solid surfaces Place the device on solid surfaces to avoid vibrations Do not use chemical cleaners Metal parts can be cleaned with a moist cloth Before cleaning the device always pull out the mains power plug If the device does not work correctly The user should not try to maintain the device autonomously All repairs and service should be realized by a qualified technician Handle the mains cable with care Never pull at the mains cable to disconnect the device If the device is not used for a long time period pull the plug of mains cable out of the socket 4 21 VARYTEC Attention The warranty claim expires when damages are caused by disregarding this user manual The manufacturer and importer does not assume liability for consequential damages at all Only qualified and trained technicians are allowed to work at electric parts of the device electrical and mechanical connections have to be mounted according to the european safety standards 5 21 VARYTEC 2 Introduction 2 1 Controllable features Control with 5 or 12 DMX channels 540 Pan 270 Tilt RGB color mixing Gobo wheel with 9 gobos and gobo shake function Adjustable electronic strobe Adjustable electronic dimme
Download Pdf Manuals
Related Search