MHTL-PAN User Manual
Contents
1. PAN 47 1 296 11 65 Phone 718 524 4370 Fax 718 524 4390 www MHTLIGHTINGcom2. ETE INSTALLATION INSTRUCTION MHTL PAN Main Data Fixture Model Input Voltage Input Wattage Net Weight 36W 99 99 99 MHTL PAN 1x4 HE 50 60Hz 47 2 x11 7 x3 eee 16 lbs MHTL PAN 2x4 47 2 x23 5 x3 26 lbs Warnings 1 This product is to be installed and serviced by a certified electrician 2 The Luminaire should be installed in an area with good ventilation clear of any corrosive or combustible gases and explosive objects 3 A supply voltage tolerance of 10 is allowable An improper installation outside of this range or with the incorrect input voltage will influence the normal operation of this luminaire and result in damage to the lamp and electronic ballast 4 The luminaire must be properly grounded to prevent accidental electrical shocks and to prevent interference from the electrical ballast affecting the normal operation of the luminaire 5 Do not open the housing with the luminaire powered on Steel Wires Installation Instruction Pull the cable through the hole in each cap and secure the caps onto the metal bases along the channel of the fixture ANI Bi W i Install metal bases to ceiling Push the other end of the cable through the hole in each cap with spring lock The cable length is adjustable bv pushing in the spring lock Recessed Standard 1 Remove the traditional lay in troffer fixture 2 Choose the replacement that fits in the grid Install provided steel c
3. able as a second means of support if needed 3 Remove the panel on the back box to access the wiring and connect the power source 4 Replace the panel on the back box Close Back Panel Connect Power Source Phone 718 524 4370 Fax 718 524 4390 www MHTLIGHTINGcom INSTALLATION INSTRUCTION MHTL PAN Suspended Optional 1 Measure the distances for the four mounting points on the top side of the fixture and place marks on the ceiling Install the four metal bases to your markings on the ceiling with anchors and screws Screw in one aircraft cable connector on the top side of the fixture Screw in the adjustable end of aircraft cable to the metal bases that are already on the ceiling Repeat for the other metal bases until all metal bases are connected to the fixture with an aircraft cable ja a a Adjust the aircraft cable length for desired height and connect power source to the fixture Surface Mount Optional 1 Install the provided mounting plate onto the ceiling using anchors and screws 2 Open the panel on top of the fixture Connect the power source to the fixture and close panel 3 There are two L shape brackets already attached on the fixture for surface mount 4 Line up the four hooks on the mounting plate and mount the fixture onto the plate Phone 718 524 4370 Fax 718 524 4390 www MHTLIGHTINGcom INSTALLATION INSTRUCTION MHTL
Download Pdf Manuals
Related Search