- Picomed
Contents
1. Documentation IRS IR sensor Page 3 5 2 Reuse 2 PICOMED If the IRS shall be disconnected and installed some other place the following shall be done a Visual check any damages on box Q Check functionality a Fora function test there has to be a transmitter and a receiver available Both of them has to be programmed to each other a Check that IRS receives IR and that it transmit it to the receiver Q Check that the light indicator is illuminated when it receives an IR signal QO Clean it 5 3 CE approvement The product is designed with reference to the current EQS EU directives including their standards The EC Declaration of Conformity is stored by the manufacturer CE 5 4 Technical data Type Operation Power supply Power consumption Energy transmission Temperature to be used within Measurements Weight Box is made of Recycling Developed and manufactured in Documentation IRS IR sensor IRS IR sensor for infrared light Via IR transmitter Lightindicator in front 10 30 VDC 10 24 VAC e lt mA 12 0 V None 25 to 40 C LxBxH 21 x 43 x 48 mm 20 g Polystyren and polycarbonat To be threatened as electronic waste RoHS Norway by Picomed as N4993 SUNDEBRU Page 42. X PICOMED Enviromental Control Systems Documentation for IRS IR sensor for R receivers Revisionlist Contains information about changes done in different versions of document Revisionlist Short description of change 01 02 2011 Bent Havard Sollid First version based on Norwegian version 01 02 2011 Contents Documentation IRS IR sensor MP oases cia AE E 2 1 1 WHE EE e tal E E E T EEA S E 2 De UT E EA E AA 2 3 M 021 0 a A ee mE ere eee 2 A MS UALEAEIOUN TAG OS aA E secuetsceuesetanateusn dosteetcens 2 4 1 Electrical connections os2ccctecas caitanc codon dues otenesacedciarcsscctaiucatoicwwistersaeceacbowevesccbbetedescuencsass 2 DC CHNC AL SAORI OU EE E AAE E E 3 5 1 MOUS SOON ash strc tereise hota eaeant eb esceaetae lt eqnet ot aasaecdecnannesectenetaunqrnte aceon Meeentecectoade 3 LLL WCAG CIOSS TOE WOK eepe a r a a 3 5 2 FRCS re NEA EE E AASE E AE ERE A AEA 4 5 3 CEAD OYE eee E E E 4 5 4 RE EE E E E E E E E T A EE E AA 4 Brokelandsheia 4993 Sundebru TIf 47 37 11 99 50 Fax 47 37 11 99 51 E mail firmapost picomed no Foretaksnr 962 211 631 MVA 2 PICOMED 1 Preface Picomeds IRS IR sensor is a part of Picomed as products for enviromental control systems It receives infrared IR signals from IR transmitters It converts it to electrical signal which is sent via wires to an R receiver 1 1 The product in general IRS is designed to be mounted on a wall It receives most of the common IR signals on
3. the market and has a wider range than the R receivers which it shall transmit IR signals to The enclosure which it is placed inside has an IR transparent fronttfoil 2 User manual IRS is ment to be mounted on a wall It is designed for both indoor and outdoor use There is a light indicator in front of the IRS which is illuminated when the receiver receives R signals from the IRS 3 Maintenance The IRS can be cleaned with a dry or humid cloth It shall not be exposed to much water fluid Except of this it does not need any maintenance There is no battery to be changed 4 Installation instructions There is no settings to be programmed no IR to be programmed factory settings etc It is ment for indoor or outdoor protected for hard weather conditions If a power outage is present there will not be any data which need to be reentered e If mounted outdoor it has to be shielded for direct rain and snowing conditions e Avoid direct sunlight or other unwanted IR sources since this will jam R signals from IR transmitters Avoid any obstacles in front of it since this will stop IR signals from IR transmitters The light indicator is activated by the IR receiver when the receiver has got R signals from the sensor IRS shall be mounted by a technician which connect it to a receiver Sensor is now ready to be used 4 1 Electrical connections It shall be powered by 10 30 VDC 10 24 VAC Electrical connections to IR receiver C
4. onnections amp colours Function Yellow LED Blue IR Black 0 V Red PWR Documentation IRS IR sensor Page 2 2 PICOMED 5 Technical information 5 1 Troubleshooting Symptom Possible fault Correction Sensor does not respond at e Power not connected e Check power supply all e LED or IR is not e Check wires connected to receiver Sensor does not work well or e Covered e Remowe curtains etc it works only when which is in the front of the transmitter is pointed directly sensor to it or only when transmitter e IR noise e Check if there is a lot of is placed very near sensor sun light directly to the IRS or other R sources e Sensor placed in a not e Check if IR signals really useable place can be seen by IRS Sensor works now and then e Receiver or transmitter e Program receiver once only in short intervals or only not programmed correctly again on some of the expected en o Program relayfunctions in receiver once again 2 NOISE e Check if there is a lot of sun light or other IR sources beaming directly to the IRS Sensor works only on some of e Receiver or transmitter e Program receiver once the expected channels not programmed correctly again e Check if the light indicator is illuminated when IR transmitter 1s operated 5 1 1 If it does not work If there are difficulties with the equipment please contact the technician Below is a field to note name and phone number to technician
Download Pdf Manuals
Related Search