TECHNICAL DATA – user manual
Contents
1. to fixed it The glue is possible to dilute by the water The glue VS K has strong alkaline reaction it contains the water glass The using of protective gloves and protective goggles is recommended by the work with this glue Protect your hand before and after working by the protective hand cream If the eyes are hit it is necessary to wash out them by the clear water and immediately to visit specialist doctor The glue is not toxic The values given herein are typical results of laboratory test They are thus representative for guidance only and therefore do not constitute a specification of form part of contract for factual purpose InHeat spol s r o Spojenc 384 417 23 Ko any esk Republika Tel 420 417 533 075 Fax 420 226 013991 Email info inheat cz www inheat cz2. a2O ca 4 Fe203 ca 0 3 Workflow Delivery storage and handling Safety a Bonding of the ceramic fiber materials The glue must be very good mixed and dab in thin layer max 0 5 mm on both glued sides Both parts will press and hold together by low pressure during 2 5 second according to the dimensions of the glued parts It is necessary to clean immediately after work all bespattered places and working tools the drying glue is hard to clear away b Bonding of modules the sticking is possible only on the surface which must be non crumble dried and without dust Dab the layer of the glue on the reverse side of the modules The layer of the glue must be 3 4 mm thin Module must be pressed to the surface and hold for 3 5 second this case is for module 300x300x50mm If the dimensions of modules are bigger the fixing time has to be longer The glue is delivered for instant usage packed into plastic containers 4 6 kg Approximate consumptions sticking of blankets 2 3 kg m2 sticking of modules 4 5 6 kg m2 The glue is necessary to store in pent up the best in original containers The glue must not be frozen It is recommended to surface of glue in container pour over by the thin layer of water for the long term storage and container again pent up close The term for storage is in original containers 12 months If is encrusted on the top of the glue is necessary carefully to withdraw it it is impossible
3. inffteat spol 4 t o vysokoteplotn izola n material TECHNICAL DATA user manual Product Description Color Manual Volume weight CERAMIC REFRACTORY MASTIC VS K 1200 Glue SIBRAL VS K 1200 has dense non gravitate consistence contains only the inorganic raw materials Glue does not contain any organic substances or other combustible additions Identification according to the ENV 1402 1 Grey It is possible to stick all kind of lightweight insulating materials produced from ceramic fibers The temperature for glued joint is 1100 C This glue is possible to use for temperature 1200 C if the vitrifying of the glued joint is allowed It is possible to stick other ceramic materials calcium silicate fireclays etc Sticking on other aluminum or metal sheets and plates the sheet and plates have to be without oil without dusty and surface of glued side must be roughened The glue is not suitable as a join filler in insulating and as protective varnish of the surfaces The glue dries by the room temperature is the best to use it 24 hour after finishing of the sticking The glue during tempering at the temperature higher than 1100 C continuously changed into the vitreous consistence The cohesion of glued joint remains still the same ca 2 0 kg dm3 Max using temperature 1200 C Grain size 0 3 mm Refractoriness min 149 ISO Chemical composition SiO2 ca 41 before annealing Ah03 ca 22 N
Download Pdf Manuals
Related Search