LawMate - StuntCams
Contents
1. unit to recognize it Formating memory cards over PC is highly not recommended and may result in recording failure lt Sliding the vibration switch to turn vibration mode on 2 With DVR front side facing toward you and memory card golden contact area facing upward insert the memory card in the slot 3 To power on the DVR gentely press once Blue LED turns on 4 To record press once LED will shift from green to red Camera must be connected at this moment In vibration mode DVR will vibrate 3 times when recording starts 5 To stop record press again LED turns to green 6 Press to turn off DVR LED turns off In vibration mode DVR will vibrate 5 times Note The DVR will turn off automatically in 5 seconds if memory card is not placed 5 PV 50 Matchbox Size DVR LawMate Law Enforcement Products Manufacturer2. 80x120mm 1 Names and Parts Pi 1 Vibration Switch 2 Power LED y 3 Camera In ae a 4 Power Rec LED 5 Control Port 6 Power ON OFF U l 7 REc sTOP of 8 Memory Card Slot E 9 Reset Memory Card in SS Cable Controller a H mlM f Pouch USB Charge Cable 80x120mm 3 Charging USB connection to charge Charge LED Green When fully charged LED will turn off With the DVR powered off connect USB cable to and the other end of the cable to a computer When the battery is fully charged the device supports 100 minutes continuous recording Please note that every video file is approximately 33minutes 500MB 4 Connecting to a Camera rle CD 1 To connect a camera plug in camera jack into on the device 2 The green LED will illuminate to show the camera is in standby mode Stop 2 5 Retrieving Video File 1 With memory card inserted connect the device to computer without turning it on by USB cable to establish connection 2 After the connection is established turn on DVR 3 DVR is recognized a
3. s a removable drive User may move copy files between removable drive and computer 6 Date and time setting for Windows computer ak Right click on Windows desktop Choose Notepad to create a txt text file Then double click the text file 2 Suppose current time is October 16 2012 15 00 Enter date and time information as 2012 10 16 15 00 00 Note that a space must be present in between date and hour and time is in 24 hour format 3 Name the file as settime txt and save it to the root directory of the memory card 4 Insert the memory card to the slot then power on the device The date and time setting is now completed 5 Please note when the date and time information is successful set to the deivce the settime txt file should not be visible when you connect the device to the computer again 7 Connecting Cable Controller D Mh H 1 Connect cable controller to l 2 Please be advised cable controller is for video recording only It does not support photo function 3 To power on the DVR slide the controller toggle downward or press on the DVR LED red will turn on 4 Recording is activated automatically when DVR is on 5 Sliding the toggle downward and hold for 3 seconds time to turn off recording DVR will be turned off in the same 4 7 Operation Xx Please note memory card needs to be formatted on the device for the
Download Pdf Manuals
Related Search