T205 User Manual
Contents
1. antenna or cable system This will prevent damage to the product due to lightning and power line surges 11 Overloading Do not overload wall outlets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock 12 Damage Reguire Service The unit should be serviced by gualified service personnel when A The power supply cord or plug has been damaged B Objects have fallen into or liguid has been spilled into the enclosure C The unit has been exposed to rain D The unit has been dropped or the enclosure damaged E The unit does not appear to operate normally or exhibits a marked change in performance 13 Servicing The user should not attempt to service the unit beyond that described in the user s operating instructions All other servicing should be referred to gualified service personnel 14 Safety Check Upon completion of any service or repairs to this product ask the service technician to perform safety checks to determine that the product is in proper operating condition For guestions or comments regarding this or other products please call our toll free number 1 800 888 4491 Limited 90 Day Warranty Information Timex Audio Products a division of SDI Technologies Inc hereafter referred to as SDI Technologies warrants this product to be free from defects in workmanship and materials under normal use and conditions for a period of 90 days from the date of2. in installation such as a bookcase or cabinet that may impede the flow of air through the ventilation openings 3 Heat The unit should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat 4 Power Sources The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance itself 5 Power cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them It is always best to have a clear area from where the cord exits the unit to where it is plugged into an AC outlet 6 Cleaning Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning 7 Non Use Periods The power cord of the unit should be unplugged from the outlet when it is to be left unused for a long period of time 8 Object and Liguid Entry Care should be taken so that objects do not fall and liguids are not spilled into an enclosure through openings 9 Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards 10 Lightning For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the
3. lt lt or gt gt Button to select your time zone The time display will show the current time for the selected time zone There are seven zones to choose from ATL Atlantic Standard Time EAS Eastern Standard Time CEN Central Standard Time MTN Mountain Standard Time PAC Pacific Standard Time ALS Alaskan Standard Time HAI Hawaiian Standard Time Setting Time and Calendar Press and hold the Clock Adjust Button located on the back of the unit for 2 seconds until the time display flashes If the time is correct press the Clock Adjust Button again to accept the setting Otherwise press the lt lt or gt gt Button to adjust the time hold for a few seconds to advance or reverse rapidly Remember to set the correct AM or PM time An icon at the upper right hand corner of the display is the PM Indicator there is no AM indicator When the correct time is displayed press the Clock Adjust button to confirm The year display will flash Press the Clock Adjust Button to accept the current year setting or press the lt lt or gt gt Button until the correct year is displayed Press the Clock Adjust Button to confirm year setting after adjustment The display will change to show the date flashing Press the Clock Adjust Button to accept the current date setting or press the lt lt or gt gt Button until the correct date is displayed holding the button for a few seconds will advance or reverse rapidly Press the Clock Adjust Button to c
4. D ALONG WITH THIS PRODUCT COULD RESULT IN AN ACCIDENT AND OR PERSONAL INJURY Maintenance e Place the unit on a level surface away from sources of direct sunlight or excessive heat e Protect your furniture when placing your unit on a natural wood and lacquered finish A cloth or other protective material should be placed between it and the furniture e Clean your unit with a soft cloth moistened only with mild soap and water Stronger cleaning agents such as Benzine thinner or similar materials can damage the surface of the unit FCC Information This device complies with Part 15 of the FCC Rules operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the eguipment NOTE This eguipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This eguipment generates uses and can radiate radio freguency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications Ho
5. Model T205 Color Changing Alarm Clock For additional information online registration and exclusive special offers please visit our website www timexaudio com Table of Contents Q ick Start O i to nt on 1 Controls and Indicator Screenin an E zon r r ai 2 DISPIAV zu zistis o izo o lk KV vpravo lab ro 3 Installing the Backup Batteries ooooooovro on non on jinsini danai d Enaki NER KR ARE KR R K n 4 Gettlng stanted 1 251517105010702 hl A a 5 Operating the Dual Alarm System ooooroooroor o rn o rr 6 Colon Change conns nesnenin esa a o a u ii 6 Listening to Auxiliary Audio Devices ooorooron so ren rn ot o K LRL R KL R R K EEEE EEEE 7 Listening to R dloO s 0 s 18500 00x0x0 a ara a aa lv 8 Sleep Operation Bedtime Beats and Radi 000000000 8 Dimmer Operation Sissu ii itlara vho O oa 8 A Consumer Guide to Product Safety ooooooov o r nor r rn rn ee KK E E EEEE RE EEE EEEE EEEE 9 Limited 90 Day Warranty Information ooooooroor rn nor no nn 10 A Consumer Guide to Product Safety IMPORTANT SAFETY INFORMATION IT IS THE USER S RESPONSIBILITY TO USE THIS PRODUCT PRUDENTLY RESPONSIBLY AND IN A SAFE NON DISTRACTED MANNER AT ALL TIMES FAILURE BY THE USER TO PAY FULL ATTENTION TO THE PROPER OPERATION OF ANY EGUIPMENT BEING USE
6. eries If the backup batteries have been installed and a power failure occurs or the AC cord is accidentally disconnected the current time and alarm time settings will be temporarily maintained If the backup batteries have not been installed or are dead when the AC power resumes the display will show 12 00 and you must reset the time and alarm settings 1 Open the battery compartment cover located on the bottom of the unit 2 Install 2 x AA battery 3 Close the battery cover AC adaptor The unit comes with an AC adaptor that must be used to power the unit unit will not run on back up battery Plug the cable into the DC jack located inside battery compartment on the bottom of unit and plug the other end into AC wall outlet Getting Started Daylight Saving Time This unit is a preset Clock the clock is already preset to Eastern Standard Time It s simple to match settings to where you live For daylight saving time 1 Set the DST Switch to 1 The DST icon will appear on top of display and the time will advance 1 hour 2 Set the DST Switch to 1 to set the time back 1 hour Pre Set Time and Date Settings This model is eguipped with a preset feature the time and date have been set for Eastern Standard Time at the factory To change vour time zone setting press and hold the Time Zone Button The current time zone will flash briefly at the bottom of the display While the Time Zone is flashing press the
7. eset it to come on the following day Snooze 1 Press the Snooze Dimmer Button after the alarm sounds The alarm will be silenced and come on again about 9 minutes later Snooze can be pressed several times during the 1 hour alarm cycle Color Change 1 During normal mode press and hold the Color Button on top of the unit to activate the random color sequence the color of the cabinet and display backlight will fade from one color into the next There are seven colors To stop on a particular color press the Color Button when the desired color is displayed 2 You can control the brightness by pressing the Snooze Dimmer Button as needed Listening to Auxiliary Audio Devices If you are using another MP3 player or other portable audio device you can play it through the T205 via the Line in Jack iz O BO NV Plug one end of an audio patch cord available at www timexaudio com into the headphone or line out jack on your device and the other end of the patch cord into the T205 MP3 Line in Jack located on the back of the unit Set the Function Switch to AUX The MP3 Icon appears on the top of the display indicating Line in playing mode Tum on and play your device Adjust the Volume Dial on the left of the T205 To turn off the unit press the Button on the T205 Please remember to turn off your device too Listening to Radio Tuning and Playing the Radio ls 2 Press the Button to turn the unit on Move the Func
8. onfirm the date setting after adjustment You will hear 2 beeps indicating that clock and calendar setting is complete and it will exit the setting mode Operating the Dual Alarm System Note The T205 has a dual alarm feature allowing you to wake to Nature Sounds or Radio A buzzer alarm will still sound in the event of power failure if backup batteries are installed Setting the Alarm s 1 Press and hold the Button until the display flashes Press the lt lt and gt gt Button to set the alarm time Remember to set the correct AM or PM time 2 Press the Button again or wait for 10 seconds Alarm 1 is now armed indicated by the numbered alarm clock icon 3 To set Alarm 2 just repeat steps 1 and 2 above but using A Button 4 Set the Function Switch located on the back of the unit to wake to AM FM radio or Nature Sounds Both alarms 1 and 2 will wake you to the same sound source NOTE The radio alarm will wake you to the currently tuned band and station Review Arming and Disarming Alarm Turn Alarm Function On and Off 1 Press the or 3 Button once The display will show the current alarm time on the bottom part of the display for alarm time review 2 During alarm review press the button again to arm or disarm the alarm When the alarm is armed the related alarm icon appears in the display Resetting the Alarm to Come on the Next Day 1 When the alarm is sounding press the d Button to silence the alarm and r
9. original purchase Should service be reguired by reason of any defect or malfunction during the warranty period SDI Technologies will repair or at its discretion replace this product without charge except for a 3 00 charge for handling packing return UPS postage and insurance This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center listed below The product must include proof of purchase including date of purchase The fee for service after the warranty period or without proof of purchase is 6 00 Before returning this product for service please first replace the batteries if applicable with fresh ones as exhausted or defective batteries are the most common cause of problems encountered If service is still required 1 Remove batteries if applicable and pack the unit in a well padded heavy corrugated box 2 Enclose a photocopy of your sales receipt credit card statement or other proof of the date of purchase 3 Enclose a check or money order payable to the order of SDI Technologies Inc for the sum of 3 00 or 6 00 if after the warranty period or without proof of purchase 4 Send the unit prepaid to the Factory Service Center listed below Consumer Repair Department SDI Technologies Inc Timex Audio Products Division 1330 Goodyear Drive El Paso TX 79936 6420 NOTE This warranty is valid only if the product is used for the purpose for which it wa
10. s designed It does not cover i products which have been damaged by negligence misuse or accident or which have been modified or repaired by unauthorized persons ii cracked or broken cabinets or units damaged by excessive heat iii damage to tape cassettes if applicable iv the cost of shipping this product to the Factory Service Center and its return to the owner This warranty is valid only in the United States of America and does not extend to owners of the product subseguent to the original purchaser Any applicable implied warranties are also limited to 90 days and SDI Technologies will not be liable for conseguential damages Some states do not allow limitations on implied warranties or exclusion of conseguential damages so these restrictions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state 2008 SDI Technologies Inc All rights reserved TIMEX is a registered trademark of Timex Corporation the United States and other countries T205 1201208 A Printed in China
11. t During sleep mode press the Sleep Button once to show the sleep time remaining Pressing it again will change sleep time to the next lowest increment Turn the Volume Dial to adjust the sleep volume The volume will remain at that level the next time the unit is activated by alarm or by pressing the Button To stop listening at any time press the Button on the T205 to turn the unit off Dimmer Operation During normal operation press the Snooze Dimmer Button to control the brightness of the LCD display A Consumer Guide to Product Safety IMPORTANT SAFETY INSTRUCTIONS This unit has been designed and manufactured to assure your personal safety Improper use can result in potential electrical shock or fire hazards Please read all the safety and operating instructions carefully before installation and use Keep these instructions handy for future reference Take special note adhere to all warning and always follow the instructions on the unit and in the instruction and service manuals 1 Water and Moisture The unit should not be used near water For example near a bathtub washbowl kitchen sink laundry tub swimming pool or in a wet basement 2 Ventilation The unit should be situated so that its location or position does not interfere with it s proper ventilation For example it should not be situated on a bed sofa rug or similar surface that may block ventilation openings Also it should not be placed in a built
12. tery backup Insert 2 x AA battery as indicated into battery compartment Replace battery compartment cover 4 alarm setting Press and hold the Button on the top of the unit until the alarm time display flashes Press the lt lt or gt gt Button to adjust the alarm time hold for rapid adjustment A PM indicator appears for PM setting there is no AM indicator When the correct alarm time is set press the Button to exit setting The alarm 1 icon will appear Follow the same steps using the Button to set Alarm 2 Note that the alarm source for either alarm is determined by the function switch Controls and Indicators Back of Clock Alarm 1 Button Alarm 2 Button Color Button Random Button Power Button Alm Reset Button Time Set Button Bedtime Beats Sleep Button Snooze Dimmer Button Reverse Button Forward Button Back of Clock Bottom of Clock Side of Clock L N HD m a aaa DC Jack DST Switch MP3 Jack in Function Time Zone Button Tuning Volume Switch AM FM Sounds AUX Display MP3 Line in Indicator Battery gt MP3 3 DST Indicator Sleep Display sleep Da ESN Alarm Indicator j 1 j PM Indicator Time Display mn rt mf plan Display atarm V a 7 AM FM Indicator NALA Date Indicator YEAR DATE pm Installing the Backup Batteries Installing the Backup Batteries i Installation of Backup Batt
13. tion Switch as needed to select AM or FM radio band The currently tuned station freguency will appear at the bottom of the display with FM or AM icon showing the radio band setting Turn the Tuning Dial to tune the radio to a desired station Extend the FM antenna as far from unit as possible and position for best reception Do not strip or alter the antenna wire The unit has an internal AM antenna Position the unit as needed for best AM reception Turn the Volume Dial to adjust the volume To turn off the unit press the Button Sleep Operation Bedtime Beats and Radio Sleep mode lets you sleep to Bedtime Beats or the radio until the T205 shuts off at your selected time as 2 Move the Function Switch as needed to select your sleep source Sounds for Bedtime Beats or select AM or FM radio band Do not set source to AUX Press the Sleep Button to enter sleep mode The Sleep Icon will appear on top of the display to indicate the unit is in sleep mode You can adjust the sleep timer from 90 60 30 15 minutes or OFF by pressing the Sleep Button as needed The unit will automatically turn off after the selected time When the display changes from the sleep time setting if you have selected Sound as your sleep source the currently selected Bedtime Beat bb1 classical bb2 jazz bb3 new age bb4 selections from beats 1 3 will be displayed Press the lt lt or gt gt Button to cycle to your preferred Bedtime Bea
14. wever there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the eguipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rigue de la classe B est conforme a la norme NMB 003 du Canada Connect the AC adaptor cord into the DC jack on the back of the unit and plug the other end into a working wall socket 3 clock 8 calendar setting OOOO 0000 Press and hold the Time Set Button on the top of the T205 until the time display flashes Press the lt lt or gt gt Button to adjust the time hold for rapid adjustment A PM indicator appears for PM setting there is no AM indicator Press the Time Set Button then lt lt or gt gt Button adjust the year Press the Time Set Button then lt lt or gt gt Button adjust the date Press the Time Set Button Two beeps will confirm clock setting is complete clock bat
Download Pdf Manuals
Related Search