UL 100 ULTRASONIC MOTION SENSOR USER MANUAL SYSTEM
Contents
1. SYSTEM INSTALLATION The ultrasonic sensor UL 100 contains of control unit two sensors and power cable The best place for control unit of UL 100 is inside of dashboard cover The unit is possible to fix by two side tape or shrink tape Two sensors are recommended to place on front window pillar in vehicle The ultrasonic sensor is directly connected through car alarm connector or in parallel to shock sensor included in car alarm Attention Random alarm can be caused by insects in vehicle or unclosed windows Red TECHNICAL PARAMETERS Power supply 8V 18V Operational temperature from 40 C to 85 C Black Stand by mode current comsuption 3 mA 5 mA Current output 100 mA max White B Output switch period negative impulse 800ms Activation output2. EN UL 100 ULTRASONIC MOTION SENSOR USER MANUAL AN WARNING Carefully read following instructions and technical specifications in this manual before installation The system must be installed and used only according to this manual The system is designed for vehicles with 12V power supply It has to be connected to 12V output and to the ground Neither producer or seller of the system is responsible for damages caused by incorrect installation using or operating of this product Unprofessional operation or modification of the system can damage the system alone or the electric system of the vehicle and leads to warranty loss For proper working of the system we recommend the installation to be made by authorized service SYSTEM DESCRIPTION The ultrasonic sensor UL 100 senses motion in the vehicle The sensor is recommended like an additional security of car alarm Sensor sensitivity is adjustable by turning the potentiometer on control unit The motion is signalized by flashing of LED diode and by connection of white wire to common black wire minimally on 800ms UL 100 is designed for vehicles with power supply 12V SYSTEM INSTALLATION The ultrasonic sensor UL 100 contains of control unit two sensors and power cable The best place for control unit of UL 100 is inside of dashboard cover The unit is possible to fix by two side tape or shrink tape Two sensors are recommended to place on front window pillar in vehicle The ultrasonic sensor is directly c
3. onnected through car alarm connector or in parallel to shock sensor included in car alarm Attention Random alarm can be caused by insects in vehicle or unclosed windows TECHNICAL PARAMETERS Power supply Operational temperature Stand by mode current comsuption Current output Output switch period Activation output EN UL 100 ULTRASONIC MOTION SENSOR USER MANUAL WARNING Carefully read following instructions and technical specifications in this manual before installation The system must be installed and used only according to this manual The system is designed for vehicles with 12V power supply It has to be connected to 12V output and to the ground Neither producer or seller of the system is responsible for damages caused by incorrect installation using or operating of this product Unprofessional operation or modification of the system can damage the system alone or the electric system of the vehicle and leads to warranty loss For proper working of the system we recommend the installation to be made by authorized service SYSTEM DESCRIPTION The ultrasonic sensor UL 100 senses motion in the vehicle The sensor is recommended like an additional security of car alarm Sensor sensitivity is adjustable by turning the potentiometer on control unit The motion is signalized by flashing of LED diode and by connection of white wire to common black wire minimally on 800ms UL 100 is designed for vehicles with power supply 12V
Download Pdf Manuals
Related Search