User Manual - Parts Express
Contents
1. ye dapa rudo Wired Home WHIRK2 Basic Tube Target IR Repeater Kit User Manual Features e Wide band 30 100 kHz frequency response e Control up to four A V components from another room e Includes one target an IR hub with power supply and four emitters e Mount the IR target in a standard single gang box e Add up to 14 additional targets Instructions 1 Determine the distance between the target Display and the source device If the distance is greater than the reach of the 6 foot cable on the IR target run Cat5 6 UTP cable from the target to the IR hub 2 Remove the phoenix style connector from the IR Hub input Connect the wires as shown on the next page Brown to Green to Blue to S 3 Plug the phoenix connector into the IR Hub input Plug the IR emitters into the emitter outputs attach the emitters to the source device using the attached adhesive film 4 Connect 12 Vdc power to the IR Hub If you are using IR blasters use a power supply with greater than 1000 mA current capacity and limit to two IR Blasters Connection Diagram Lees ant n j NG Specifications e IR frequency bandwidth 30 100 kHz e Control range 30 ft e Reception angle 45 off axis e Target dimensions 2 75 H x 1 9 W x 1 3 D 10 ft connection cable with 3 5mm plug on IR emitters e Use UTP cable to connect the Target to the Hub Warranty This product is warranted f2. ree from defects in material and workmanship for one year from date of purchase Warranty does not apply to misuse abuse neglect accident improper use etc Contact your reseller for a Return Merchandise Authorization
Download Pdf Manuals
Related Search