OPERATION MANUAL - OL5800+InfoGlobe
Contents
1. Press V or A until you see the call record you want to delete 10 00 1 0 3 0 CALL 123 45 6 7 8 9 0 SMITH JOHN il Press DELETE the LCD displays ERASE iii Press DELETE again to confirm deletion iv If the deleted message was the last record in memory the display will go back to standby mode If there are other records in memory the next CID record received after the deleted record will be displayed v VIP call records can t be deleted See Set VIP Calls for details Press any key to cancel the deletion No activity for 20 seconds it will return the handset display to standby idle mode 5 DELETE ALL CALLS i If the new call information has been reviewed you can erase all call records If there are any new calls in call list ERASE ALL will not work il In the standby idle mode press and hold DELETE until the LCD displays ERASE ALL OL3020 User Manual 21 11 00 1 1 03 RASE ALL iil When the end of the list is reached END is displayed iv Press DELETE again to confirm deletion and return to standby mode You can press CHAN to return to standby mode No activity for 20 seconds will return the handset display to standby idle mode 6 SET VIP CALLS assigning VIP designations to CID records The user can create VIP call records When a VIP call is received 4 beeps will be heard between rings and the VIP ico2. change to 7digits 456 7890 5 Press CALLS again to repeat the cycle above iii With the correct number displayed press TALK The display will show TALK TALK iv After a 2 second delay the unit will enter TALK mode automatically The dialed digits appear from right to left on the display 4567890 While in CID review mode you can press CHAN to return to standby idle mode No activity for 20 seconds will return the display to standby mode 8 Save CID to Speed Dial memory i In idle mode press V or A to select the Caller ID number that you want to save ii Press CALLS to select the number format that you want to save iii Press MEM The screen will display LOCATION X where X is a digit 0 9 Note only the phone number can be saved to speed dial memory OL3020 User Manual 23 LOCATION X iv X is the lowest empty memory slot Press MEM to confirm If you prefer a different memory location press the desired location number 0 9 The display will now show MEM X STORED WARNING Make sure yow re not unintentionally replacing a number already stored in that location MEM X STORED You can press CHAN to return the display to the standby idle mode No activity for 20 seconds will return the display to the standby idle mode 20 Visual Message Notification Handset In conjunction with voicemail service thro
3. current minute 13 Press SELECT to confirm your programming Note The order of Day and Month will depend on how you set the Date Format Time is also set upon receiving Caller ID information however you must set the year manually 8 Daylight Saving Time The Info Globe features a hundred year calendar with an automatic Daylight Saving Time DST adjustment Daylight Saving Time begins at 2am on the first Sunday of April Time reverts to standard time at 2am on the last Sunday of October That is on the first Sunday of April the clock increments from 1 59am to 3am On the last Sunday of October the clock falls back from 1 59am to lam This is done automatically when the feature is enabled If the feature is off the clock increments normally from 1 59am to 2am 1 Press SELECT to access the menu 2 Use UP or DOWN to select SET DST in the menu then press SELECT again 3 You will see DST OFF or ON The ON OFF field is blinking 4 Press UP or DOWN to toggle between ON and OFF 5 Press SELECT to confirm your selection Note The default value after a power failure is DST Off 9 Personal Messages Programming Personal Messages OL3020 User Manual 37 You can program up to 6 personal messages Press SELECT to enter the menu Use UP or DOWN to select SET MESSAGE in Menu Press SELECT again The MSG1 envelope icon is blinking Use UP or DOWN to choose the desired location 1 6 Press SELECT on the chosen lo
4. in the order of receipt until the LCD displays END NEW CALL and the NEW CALL indicator stops blinking OL3020 User Manual 19 END NEW CALL iii If the received call information is same as any of the existing new calls the RPT icon will be on to indicate REPEAT CALL The most recently arrived CID will be saved attached with a new date time stamp The older record will be deleted After you review this call the RPT icon will turn off iv If you do not review other calls for 20 seconds the time and date will be displayed and the call counter will show the total number of new calls including those already reviewed 10 00 1 0 3 0 Press CHAN to return to standby idle mode 2 No activity for 20 seconds will return the display to standby mode 3 REVIEWING OLD CALLS i In standby mode press A or W to review old call information from the oldest to the newest button or from the newest to oldest button ati 10 00 1 0 3 0 123 4 5 6 78 9 0 SMITH JOHN ii When the end of the list is reached END is displayed OL3020 User Manual 20 iii If there are no records in memory NO CALLS is displayed NO CALLS Press CHAN to return to standby idle mode No activity for 20 seconds will return the display to standby mode 4 DELETE INDIVIDUAL CALL i When you review Caller ID information you can delete it from memory
5. unit to locate the handset short and long page Temporary touch tone pulse to tone dialing Tone Pulse dialing mode selection in handset Ringer ON OFF selection in handset 10 number speed dial memory in handset up to 16 digits per phone no Flash key for call waiting and call transfer 600ms 3 level Volume control Pause key pause time is 4 seconds Low battery warning tone Backlit LCD Display Auto Answer when Handset is removed from cradle Any key answer Redial amp CID transfer to memory up to 16 digits long Handset Caller ID Features Caller ID and Call Waiting ID compatible CID memory stores up to 64 names and numbers 3 line Handset display Total call counter New call LED indicator on handset Repeat call indication LCD icon 3 language options English Spanish amp French Scroll review of CID records Selective erase Erase All functions Real time clock date amp time Private out of area indication LCD display contrast control 6 levels default at 3 Smart Dialing from Caller ID Battery Low indication on the Handset display OL3020 User Manual 8 3 SetUp Connect the power supply to an electrical outlet and base unit Remove the handset battery cover and connect the battery back Replace cover Charge the handset for at least 10 hours before using your phone Connect the modular phone cord to a live phone jack and the base unit 4 Handset Quick Programming Guide In
6. you hold the button for 5 seconds the page will be extended to 60 seconds Press any key on the Handset to stop paging OL3020 User Manual 13 13 Selecting System Language SET LANGUAGE 1 There are 2 ways to access SET LANGUAGE mode 1 SET LANGUAGE will appear on the LCD when your phone is charged for the first time or powered up after it has been without power for an extended period OR 2 During idle on hook mode press and hold MEM until SET LANGUAGE appears 2 Setup mode begins with language selection Your phone offers 3 languages English French and Spanish Press W or A to choose the desired language and then press the MEM key to confirm After confirmation Area Code will be displayed 3 14Setting Local Area Code 000 AREA CODE 1 If you dial 7 digits to make a local call you need enter your 3 digit area code The digits will shift to the left one by one as you enter them If you dial 10 digits to make a local call enter 000 if it is not already programmed for 000 2 Press MEM key to confirm After confirmation SET T P is displayed 15 Setting Tone Pulse Preset to Tone SETT P T OL 3020 User Marya _ The current setting T or P is displayed Press V or amp to select the desired setting and the display will update the current setting SET T P T gt SET T P P gt S
7. ET T P T Press MEM to confirm After confirmation you will enter RINGER setting 16 Setting RINGER ON OFF RA RINGER ON The current RINGER ON OFF setting is displayed Press W or A to select the desired setting and the display will update to the current setting RINGER ON gt RINGER OFF gt RINGER ON Press MEM key to confirm After confirmation you will enter DATE TIME setting 17Setting Date amp Time 0 00 1 0 30 DATE TIME Press the appropriate digits to enter first the time and then the date To change the AM PM setting press any digit Press W or lt A to skip forward or backward Press MEM key to confirm After confirmation you will enter CONTRAST setting 18 Setting Display Contrast CONTRAST 7 1 Press W or A to set the desired contrast 2 Press MEM key to confirm After confirmation the display returns to standby During programming Press CHAN to return to idle mode Or if no key is pressed for 20 seconds you will be returned to idle mode Display contrast can also be set by pressing FLASH during standby idle mode 3 Press W or amp to set the desired contrast 4 Press MEM to confirm After confirmation the display returns to standby mode OL3020 User Manual 16 19 Caller ID Operation Handset Display Repeat call New Voice NEW CA
8. LL indicator Message INDICATOR indicator New Call Clock ticker Call counter Clock VS Gu 12 digit number line 12 character text line The Handset What is its purpose 12 character text For display of callers name system prompts CID and 12 digit number 1 Display caller s number CID or New call Call Shows the amount of calls new calls in standby mode counter Example of old calls CALL 18 of new calls NEW CALL 9 Repeat Call icon Lights on to indicate that the displayed call arrived more e n Clock 1 Shows the real time clock AM PM format or ek Terme en ora CID ewr nn Date 1 Shows the date month date format or pr Hewe same ore CID era Ol 3020 User Manual 17 E AE EK button DEL 1 Erase a single CID record in CID browser E 2 Erase all CID records in standby mode o W and A Scroll up and down through your CID records CHAN When on hook returns screen to idle mode CALLS Redial CID number in CID browser NEWCALL indicator Located at the top right corner of the Handset a blinking red light will alert you to new unread Caller ID records stored in memory Note1 All display illustrations in the document will be in English However the actual appearances of the screens will vary according to the language selection during start up English Spanish or French Note2 If the unit receives more than 64 calls the oldest CID information will be erased except VIP
9. QLYMPIA 0 3020 OWNER S MANUAL MANUAL DE_USARIO OLYMPIA Copyright 2004 Wave Industries Ltd All Rights Reserved Reproduction adaptation or translation without prior written permission is prohibited except as allowed under the copyright laws First Edition June 2004 Trademark Information Olympia is a registered trademark of Olympia International Holdings Ltd InfoGlobe is a registered trademark of Wave Industries Ltd Disclaimer The information contained in this document is subject to change without notice Wave Industries makes no warranty of any kind with respect to this information Wave Industries shall not be liable for any direct indirect incidental consequential or other damage alleged in connection with the furnishing or use of this information Printed in China OL 3020 User Manual 2 TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS eee eee yekeke keke k k ek eke kek 5 SAFETY INSTRUCTIONS FOR BATTERY PACK u eee ekere keke keke 7 Part I Cordless Phone Operation hhereneeee ne cncen rene kenecec HA 8 1 Cordless Phone Features 2 Handset Caller ID Features K la dill xa likar ae He Eek El sekla vu kes ea EM 3 Set SED DD DD n gr DD 4 Handset Quick Programming Guide gt Installation and Charging of the Battery Pack 6 Layout of Keys and Indicators 7 Poweri
10. aeeeeceseceaecaeeeeeeseenaeeneees 3 Getting Started WA YD ND DD O lads eats aA 4 Normal Standby Mode 5 Pre programmed Messages cscsesssssessseecsseseseceseeeceevseceeeseseeaeeecneveeeneeaesaes 6 Demonstration Mod d l an n ar and y ay nnn EE kk ae eaters eed 7 Time amp Date 8 Daylight Saving Time 9 Personal Messages 10 Erase All Mem Ores asneira asia b r E aA eles OL3020 User Manual 3 11 GSE Fo wD 3 25 55 451 511535 111111 r 13 ee en RY y Teya 12 Setting Timer On Of f 13 Troubleshooting the InfoGlobe Part III Consumer Information OL3020 User Manual 4 IMPORTANT SAFETY INSTRUCTIONS BEFORE USING YOUR TELEPHONE EQUIPMENT BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE ELECTRIC SHOCK AND INJURY TO PERSONS INCLUDING THE FOLLOWING _ 10 11 12 Read and understand all instructions Follow all warnings and instructions marked on the product Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning Do not use this product near water for example near a bath tub wash bowl kitchen sink laundry tub in a wet basement or near a swimming pool Do not place this product on an unstable cart stand or table The product may fall causing serious damage to the
11. ain maximum illumination from floating display OL 3020 User Manual 42 Part HI Consumer Information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA On the back of this equipment is a label that contains among other information a product identifier in the format US DDK W900BOL5800 If requested this number must be provided to the telephone company An applicable certification jacks Universal Service Order Codes USOC for the equipment is provided i e RJ11C in the packaging with each piece of approved terminal equipment A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC part 68 rules and requirements adopted by the ACTA A compliant telephone cord and modular plug is provided with this product It is designed to be connected to a compatible modular jack that is also compliant See installation instructions for details in section 2 The REN is used to determine the number of devices that may be connected to a telephone line Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call In most but not all areas the sum of RENs should not exceed five 5 0 To be certain of the number of devices that may be connected to a line as determined by the total RENs contact the local telephone company The REN for this product is part of the product identifier that has the forma
12. answer the call This is the Any Key Answer feature The In Use Charge LED turns on after the connection is successful If the communication link cannot be established within 8 seconds three error beeps will be heard from the Handset to indicate communication has failed Make a Call Each new call must begin by pressing the TALK button on the Handset It will scan for a clear channel of communication At the same time TALK will be shown on LCD display If the communication link is not established within 8 seconds there error beeps will be heard from the Handset to indicate communication has failed You can dial the phone number first then press TALK this is called pre dial or press TALK first then dial 10 Terminate a Call man To terminate a call press the TALK button OR Place the Handset in the cradle the call is then terminated Your Handset will emit an error beep if it cannot receive an acknowledgement from the Base Unit In this case put the Handset back in the cradle to make sure the call has been terminated 11 Short Paging To Locate the Handset 1 Press the PAGE key on the base unit PAGING will be shown on the LCD display and the Handset will emit 3 short beeps followed by a 1 second pause then 3 short beeps 12 Long Paging 1 Press and hold down the PAGE key on the Base Unit PAGING will be shown on the LCD display and your Handset will beep If
13. ator Talk End Vol UP Delete Flash Dialing Keys Scroll DOWN Memory Programming LEFT DOWN SELECT UP RIGHT Page Charge Contacts Charge In Use InfoGlobe 7___Powering Up 1 After the battery pack is installed in the Handset and the Base Unit is powered up the Handset should be placed in the cradle of the Base Unit for charging and setting a new security code Each time the Handset is placed on the cradle of the Base Unit the Base will generate and transmit a new security code to the Handset The completion of a successful security code transfer operation will be indicated by a flash of the In Use LED on the Base Unit and a beep generated by Handset In the event you do not receive the visual and audible indicators check to ensure the Base is powered and the battery pack is connected Return the Handset to the Base cradle 8 _ _ Answering Calls 1 The incoming call is signaled by a ringing sound from the Handset and by the OL3020 User Manual 12 blinking of the Base Unit s In Use Charge LED The Handset s New Call LED also blinks during ringing When the Handset is in the cradle simply pick it up to talk It will automatically answer the call The TALK button will be disabled for 5 seconds This is the Auto Answer feature When the Handset is away from the Base Unit press the TALK button on the Handset You can also press any number key 0 9 or to
14. be displayed as in line2 in line3 lt will be displayed as in line2 in line3 PAUSE will be displayed as P When PAUSE is encountered during dialing a pause of 4 seconds will be generated 25 all Timer 1 The call timer comes up automatically when you are in TALK mode on the 3 line of the display After 10 seconds the call timer will appear as dialing activities are completed 10 00 1 0 3 0 OL3020 User Manual 30 3 The call timer counts up to 999 minutes and 59 seconds After that the timer will show 0 00 3 When handset goes idle on hook the call timer will remain on the display for 5 seconds 26 _Battery Voltage Low Detection 1 Battery detection is engaged at all times except while the Handset is charging 2 If a low battery condition is detected then the Handset will enter into Battery Low condition and will beep at 10 second intervals Your Handset will change to Halt mode immediately and continue to beep If the Handset is in TALK mode it will change to Halt mode immediately and continue to beep after the call ends The display will show BATTERY LOW 10 00 1 0 3 0 BA TT E RY LOW 3 Once the battery is recharged the Handset will return to normal operation 27 Mute 1 Press MUTE to mute your microphone while in TALK off hook mode You can hear your party but they can t hear you Press MUTE again to return to n
15. calls 1 RECEIVING CALLS i When Caller ID is activated the Telephone Company sends the caller s telephone number and name if available and the call s date and time between the first and second rings The device receives and displays this information for each call and updates the display with the current date and time The NEW CALL indicator will flash Once you review all new CID records the NEW CALL indicator turns off ly NEW CALL e NEW CALL 10 00 1 1 0 1 123 45 6 78 9 SMITH JOHN il The display also indicates if caller information is not available or intentionally blocked by the sender OL3020 User Manual 18 10 00 1 0 3 0 NO CALLER ID 10 00 1 0 3 0 CID BLOCKED iii After 20 seconds the display returns to standby mode showing NEW CALL XX where XX is the number of new calls NEW CALL LED blinks until you review all new CID Call Waiting ID records Note If the received CID number is 10 digits long and the first three digits match with the area code that you have programmed the LsCD shows the last 7 digits only area code will be omitted See Setting local area code 2 REVIEWING NEW CALLS i In standby mode with the NEW CALL indicator flashing pressing A or V the LCD displays the latest new call information CALE 10 00 1 0 3 0 123 45 6 78 9 0 SMITH JOHN il Repeatedly press A or W to review all new call information
16. cation Cy eS Set Message Frequency You are now asked to select message frequency Use UP or DOWN to choose either DAILY Your message is repeated every few minutes along with the other categories of information such as time date and Caller ID DATE Your message is displayed only the specified date Perfect for birthdays or anniversaries Use UP or DOWN to toggle between Daily and to program a specific Date 1 To select Daily press SELECT when Daily flashes To program a date press SELECT when the month flashes 2 To set the message date use LEFT and RIGHT to toggle between Month and Date 3 The chosen field will blink use UP and DOWN to program the desired Month and Date 4 Press SELECT to confirm message frequency you are now ready to enter your message OL3020 User Manual 38 Entering Your Message 1 2 Use UP and DOWN on the blinking field to scroll through the upper and lower case letters of the alphabet numbers 0 9 and punctuation marks Use the RIGHT key to move onto the next character The LEFT and RIGHT keys may also be used to find the desired location for reselecting editing or deletion Hold SELECT down to delete flashing character If it is at the beginning of the line it deletes all the characters When your message is complete press SELECT to confirm Note During programming after 20 seconds of inactivity or an incoming call will return the device to Standby mode The setting is
17. ct from the wall outlet and refer servicing to qualified service personnel under the following conditions i When the power supply cord or plug is damaged or frayed ii If liquid has been spilled into the product iii Ifthe product has been exposed to rain or water iv Ifthe product does not operate normally by following the operating instructions Adjust only those controls that are covered by the OL3020 User Manual 5 operating instructions because improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation v Ifthe product has been dropped or cabinet has be damaged vi Ifthe product exhibits a distinct change in performance 13 Avoid using a telephone other than a cordless type during an electrical storm There may be a remote risk of electrical shock from lightning 14 Do not use the telephone to report a gas leak in the vicinity of the leak OL3020 User Manual 6 SAFETY INSTRUCTIONS FOR BATTERY PACK CAUTION Danger of explosion if battery is incorrectly replaced Use only an Olympia Phone approved battery pack in the handset of your Cordless Telephone To reduce the risk of fire or injury always do the following when replacing discarding or charging the battery When handling the batteries be careful not to short the battery with conducting materials such as rings bracelets and keys The Battery or conducting mate
18. ions about what will disable alarm equipment consult your telephone company or a qualified installer 2 According to telephone company reports AC electrical surges typically resulting OL3020 User Manual 43 from lightning strikes are very destructive to telephone equipment connected to AC power sources To minimize damage from these types of surges a surge arrestor is recommended WARNING Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment CAUTION The Ringer Equivalence Number is an indication of the maximum number of terminals allowed to be connected to a telephone interface The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation For body worn operation this phone has been tested and meets the FCC RF exposure guidelines when used with the belt clip supplied or designated for this product Use of other accessories may not ensure compliance with FCC RF exposure guidelines This equipment generates uses and can radiate radio frequency energy a
19. itial Setup or any time the phone is powered up SET LANGUAGE will appear on the display Press ENGLISH or SPANISH or FRENCH is displayed Press A or W to set the desired language then press MEM AREA CODE is now displayed If you live in a 7 digit local dialing area enter your Area Code If you live in a 10 digit area for local dialing enter 000 for the Area Code then press MEM SET T P T Set Tone Pulse is now displayed Press A or W to change the dialing mode then press MEM RINGER ON or OFF is now displayed Press A or W to change the ringer mode then press MEM DATE TIME is displayed Press digits or A or W to adjust date and time then press MEM CONTRAST A is displayed Press A or W to adjust the display contrast then press MEM PROGRAMMING IS COMPLETE Returning to program mode after you have initially programmed your Handset With the Handset in the idle Off mode press and hold MEM SET LANGUAGE will appear on the display Follow the steps listed above or press MEM repeatedly to find the feature you wish to program Once you program the desired feature press MEM repeatedly to exit programming CONTRAST is the final programming option prior to exiting programming mode OL3020 User Manual 9 5 Installation and Charging of the Battery Pack 1 Open the battery compartment by sliding the cover down 2 Plug the Battery Pack connector into the Handset battery socket Place the bat
20. n will be displayed i Press W or A to select the call which you want to designate VIP ii Press and hold CALLS for 2 seconds the VIP icon turns on iii To remove the VIP designation press and hold CALLS for 2 seconds Press CHAN to return to standby idle mode No activity for 20 seconds will return your handset to standby mode 7 Smart Dialing from Caller ID You can dial a phone number stored in Caller ID memory i In idle mode press or to select the CID record you want to dial il If the display phone number is in the correct format press TALK to dial 1 Ifthe display is showing 10 digits in second line such as 123 456 7890 1 Press CALLS it will change to 11 digits 1123 4567890 2 Press CALLS again it will change to 7 digits 456 7890 3 Press CALLS again it will change to 8 digits 1 456 7890 4 Press CALLS again it will change to 10 digits 123 456 7890 5 Press CALLS again to repeat the cycle above 2 Ifthe display is showing 7 digits in second line such as 456 7890 and the area code is set as 123 1 Press CALLS it will change to 8 digits 1 456 7890 2 Press CALLS again it will change to 10 digits 123 456 7890 3 Press CALLS again it will change to 1 1 digits 1123 4567890 OL 3020 User Manual 22 4 Press CALLS again it will
21. nd if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is needed Consult the dealer or an experienced radio TV technician for help Should you experience trouble with this equipment please contact US Returns Center Wave Industries for assistance If the equipment is causing harm to the telephone network the telephone company may request that you disconnect the equipment until the problem is resolved STOP If you are having trouble with your product or have any questions DO NOT return it to your dealer Call our Help Desk at 1 866 537 0384 for assistance OL 3020 User Manual 44 Warranty This warranty covers any defect in material or workmanship for a period of one year from date of purchase At our option we will repair or replace your unit To enforce warranty call Wave Customer Service at 866 537 0384 for a return authorization Upon
22. ng j iy n r klar EKE a nnn nated 000an Wi W n Vi wa kek as 8 Answering Calls soz ses l EE Kak iwe t k Xel wan Ka K e kak ke xer ae Ka Re dek anb 9 Make a Call 10 Terminat a Call 5 43y Zu n Seine a RR Key v Eke aze k n aia N k 11 Short Paging To Locate the HandSset Li keke 12 Long Paging eee eee 13 Selecting System Language 14 Setting Local Area Code 15 Setting Tone Pulse Preset to Tone u keke ke keke kek 16 Setting RINGER ON OFE ee eee rexnan en rene kece keneke HK HK K HH HHH HHHH KHK HKH KAR 17 Setting Date amp Time 18 Setting Display Contrasting r e aki kade sas Ea E 19 Caller ID Operation HandSset ELL erkeke keke keke 20 Visual Message Notification Handset 21 Speed Dial Memory 0 9 22 Pre dialing Handset OFF 23 Re dial with Handset OFF u scivsscseecete ede nidvdninieaieaiasieens nda esetenanceeaes 24 Dialing DigTiS 5 inin kya k E ke Wis plese ae Ke Senda eh xe ne K K 25 Call Timer 26 Battery Voltage Low Detection EL Eek kre ekekeke kek 21 M t sess sdascasteacenitsatveniansndiagssasigeteesadendasatvaesenaasdy daeadivedavansendysepeiesataaatees 28 Changing Volume Part II InfoGlobe Operation 1 InfoGlobe Features 2 InfoGlobe Control Keys cccccceescessessesseeeecesecseeeseeseceaec
23. optimize the dramatic effect of the display position the unit against a dark background such as books or plants This will enhance the floating effect and display contrast Connect the power adapter and telephone cord into matching jacks on the under side of the base Plug the power adapter into the electrical outlet Plug the telephone cord into the telephone wall jack The rotor inside the device starts rotation Once rotation is steady the LED turns on with the standby display The OL3020 is now in the normal standby mode 4 Normal Standby Mode During normal standby mode the following data is displayed Caller ID Information Preset Message Holds 5 Caller ID records New Calls The number of new calls in the call log will be indicated as shown There are 5 New Calls in Call Log Details of Latest Caller ID record Timothy 1 866 537 0384 Note When there are no CID records in the Call Log OLYMPIA INFOGLOBE is displayed as part of the normal standby mode rotation Message Waiting OL3020 User Manual 33 Message Waiting Note Voice Messaging Service requires subscription from your local Telephone Company 5 Time Display This shows the time and date as set 5 _Pre programmed Messages Daily and Year round Holiday Special Occasion Greetings Good Morning During 00 00 11 59 12 00AM 11 59AM Good Afternoon During 12 00 16 59 12 00PM 4 59PM Good Evening During 17 00 23 59 5 00PM 11 59PM Year r
24. ormal two way conversation 28 Changing Volume 1 You can adjust the volume level 3 levels in TALK mode Press DELETE VOL to increase the listening volume or CALLS VOL to decrease the listening volume while you are on a call OL3020 User Manual 31 Part lI___InfoGlobe Operation E InfoGlobe Features CID name and number display Caller ID records up to 54 records Real time Clock Floating Messages up to 30 characters Built in Year round Greetings 6 User Programmable Alert Messages Automatic Daylight Savings Time Adjustment Demonstration Mode Captivating animation Programmable Timer on off SODA OP SS 2 __InfoGlobe Control Keys LEFT Power ON OFF Hold LEFT down to turn Globe On and Off Press and hold key for at least 1 second Press to go to left character setting Start stop rotation in CID list view Press to exit menu and return to standby RIGHT Press and hold to start Demonstration Mode Press to go to right character setting Delete record s in CID list view Press to exit menu and return to standby SELECT Press to enter into menu selection Use UP DOWN keys to locate desired setting Press to confirm a menu entry Press again after confirmation to go back to main menu OL3020 User Manual 32 UP DOWN Press to select previous next page or character in setting 3 Getting Started 1 2 X 6 q Place the OL3020 on a firm and level surface To
25. ound Holiday Special Occasion Greetings OL3020 User Manual 34 Date Holiday Greetings January 1 New Year s Day Happy Holidays Happy New Year January 2 3 Wishing You A Prosperous New Year February 14 Valentine s Day Happy Valentine s Day April 1 April Fool s Day April Fool s Day Have a Fun Day 2 Sunday in May Mother s Day Happy Mother s Day Friday Monday of Memorial Day weekend Memorial Day Have a Happy Memorial Day Weekend 37 Sunday in June Father s Day Happy Father s Day July 4 Independence Day U S Independence Day Celebration Friday Monday of Labor Day Have a Happy Labor Day Labor Day Weekend Weekend Sunday after Labor Grandparent s Day Have a Grand Grandparent s Day Day October 31 Halloween Boo Have a SPOOOKY Halloween qe Thursday in Thanksgiving Day Turkey Days are Here November Happy Thanksgiving Day after Thanksgiving Happy Holidays to December 28 December 29 31 New Year s Day Happy Holidays Wishing You A Prosperous New Year 6 Demonstration Mode This allows the user to view a selection of displays This includes OL3020 User Manual 35 Se ON Date format Time format Preprogrammed seasonal greetings CID Information Preprogrammed daily greetings To activate and deactivate Demonstration Mode press RIGHT key for at least 1 second Note Caller ID information can still be recei
26. press MEM The display will show LOCATION X Press MEM to confirm OR press a digit key to select a different memory location The display shows MEM X STORED e No activity for 20 seconds will return the Handset to standby mode 23 Redial with Handset OFF 1 Press REDIAL while in standby mode The display will show the redial number If the number is greater than 24 digits the display will show only the last 24 digits 2 Use the keypad to add additional digits to the redial number 2 Press DELETE to delete last entered digit If all digits are deleted it will return to standby 4 Press FLASH to clear all entered digits and return to standby 9 Press TALK The unit will enter TALK mode automatically The number will scroll across the screen from right to left as it is dialed OL3020 User Manual 29 10 0 10 30 3456789999 9 0 09012 6 You can also press TALK then press REDIAL to dial the contents of Redial q Saving the contents of REDIAL to Speed Dial memory In idle mode press REDIAL then press MEM The display will show LOCATION X Press MEM to confirm OR press a digit key to select a different memory location The display shows MEM X STORED 2 No activity for 20 seconds will return the phone to standby mode 24 Dialing Digits Digits which can be dialed are 0 1 2 3 4 5 6 7 8 9 PAUSE ji will
27. product Slots and openings in the cabinet and the back or bottom are provided for ventilation To protect it from overheating these openings must not be blocked or covered The openings should never be blocked by placing the product on the bed sofa rug or other similar surface This product should never be placed near or over a radiator or heat register This product should not be placed in a built in installation unless proper ventilation is provided This product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply to your home consult your dealer or local power company Do not allow anything to rest on the power cord Do not locate this product where the cord will be damaged by persons walking on it Do not overload wall outlet extension cords as this can result in the risk of fire or electric shock Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock Never spill liquid of any kind on this product To reduce the risk of electric shock do not disassemble this product Instead when some repair work is required take the unit to a qualified technician Opening or removing covers may expose you to dangerous voltages or other risks Incorrect reassembly can cause electric shock when the appliance is subsequently used Unplug this produ
28. receipt of authorization pack your unit properly including all cables and accessories included with your original purchase Include in the packaging a copy of the original sales receipt or other evidence of date of original purchase Print your name and address along with a description of the defect and include this in the package Please include payment for any service or repair not cover by warranty as determined by Wave Industries WAVE INDUSTRIES WILL NOT HONOR ANY RETURNED PRODUCT THAT IS SHIPPED WITHOUT THE PROPER DOCUMENTATION WHICH INCLUDES A VALID RETURN AUTHORIZATION NUMBER CLEARLY PRINTED ON THE OUTSIDE OF THE PACKAGE Warranty does not cover batteries damage from misuse or neglect or acts of nature lightning floods power surges etc It also does not cover units which have been modified or incorporated into other products units which have been serviced by a facility not expressly authorized by Wave or products purchased more than 12 months previous This warranty gives you specific rights You may also have other rights which vary from state to state OL3020 User Manual 45
29. rial may overheat and cause burns Use only the following type and size of battery pack FOR HANDSET UNIT GP60AAAH3BMXZ 3 6V 600mAh GPI INTERNATIONAL LIMITED CONTAINS NICKEL METAL HYDRIDE BATTERY BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY 1 Do not dispose of the battery in a fire The cell may explode Check with local codes for possible special disposal instructions 2 Do not open or mutilate the battery Released electrolyte is corrosive and may cause damage to the eyes or skin It may be toxic if swallowed 3 Exercise care in handling batteries in order not to short the battery with conducting materials such as rings bracelets and keys The battery or conductor may overheat and cause burns 4 Charge the batteries provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual 5 Observe proper polarity orientation between the battery ies and battery charger Do not mix old and new batteries in this product 7 Do not mix batteries of different sizes or from different manufacturers in this product 9 SAVE THESE INSTRUCTIONS OL 3020 User Manual 7 Part I Cordless Phone Operation E GO SA K a a Sa KIR RR RR SS NS STONE MIS ER N DO T d K k Cordless Phone Features 5 8GHz 900MHz 40 channel auto scanning operation Manual channel selection 65536 random security codes Last number redial 32 digits max Page in base
30. right to left to a maximum of 16 digits If you try to enter more than 16 digits an error tone will be generated For example enter the digit 0 10 00 pm10 19 MEM 2 Enter the digit 9 10 00 pm10 19 MEM 2 Enter the digits 01234567899990 10 00 pm10 19 234567899990 MEM2 01 iii If you make a mistake press DELETE to delete the last digit entered The display will shift entered digits from left to right hand side iv Press FLASH to clear all entered digits including any pre existing digits v Press MEM to save the entered number The display will show LOCATION X where X is a digit 0 9 OL3020 User Manual 26 10 00 pm10 19 LOCATION X vi Press MEM to confirm saving number to the displayed location OR press a digit 0 9 to save the number to another memory location The display will show MEM X STORED for 6 seconds 3 Delete individual speed dial location i Enter memory search by pressing MEM Press W or A to select the entry you want to delete il Press DELETE to delete the entry The display will show ERASE 10 00 pm10 19 ERASE iil Press DELETE to confirm deletion or press any key to cancel 4 Speed Dialing with Handset OFF i Enter memory search by pressing MEM Press W or A to select the number you want to dial ii Press TALK The unit will enter TALK mode a
31. saved 10 Erase All Memories The following procedure erases the Caller ID list and user programmed messages Date Time Time Mode Date Format and DST are retained 1 2 3 4 Press SELECT press UP to find ERASE MEMORY in the Menu Press SELECT again ERASE ALL appears Press SELECT key to confirm The word ERASED appears and then the InfoGlobe returns to Standby Mode 11 Caller ID Note This section applies if you subscribe to Caller ID service The InfoGlobe will detect Caller ID with the inbound ringing Twenty seconds after Caller ID information is received the display will return to Standby Caller ID information will be received and stored in the call log which has a maximum number of 54 memory locations each location holds up to 16 digits and 18 characters The last Caller ID received will be the first to be shown in the list When the Caller ID list is full the oldest Caller ID is automatically deleted and the most recent Caller ID is added OL3020 User Manual 39 The following are possible Caller ID messages UNAVAILABLE Call from an area that does not provide caller ID information PRIVATE The other party is blocking name and number information PUBLIC Call from public pay phone LONG DISTANCE Long distance phone call MESSAGE WAITING There is a message left by a caller requires subscription to voice messaging service Viewing CID List Press SELECT CID LIST appears Press SELECT again The mo
32. st recent Caller ID record is shown first The following are messages that may be shown 01 gt 11 04 12 30am 186 653 7038 Timothy CID with Name and Number 02 gt 11 04 12 30am 1 866 537 0384 CID with Number Only 03 gt 11 04 12 30am Private CID information blocked by caller 04 gt 11 04 12 30am Message Waiting No CID data a Message was left with your voicemail service 05 gt 11 04 12 30am MW 186 653 7038 Message Waiting and Number available 06 gt 11 04 12 30am MW 123 456 7890 David Jones Message waiting Name and Number OL3020 User Manual 40 No CID There is no CID information Note For records that have a total number of characters and digits exceeding the storage capacity part of the data will be truncated Pressing UP displays the previous record in the Caller ID list At the beginning of the Caller ID List pressing UP will go to the last record Pressing DOWN displays the next record in the Caller ID list At the end of the Caller ID List pressing DOWN will go to the top of the list Pressing RIGHT once will delete the current displayed record Pressing and holding RIGHT for 2 seconds during Caller ID browsing will display DELETE ALL Pressing RIGHT again will delete all CID records If the RIGHT key is not pressed for 10 seconds the InfoGlobe will return to the Caller ID review mode 12 Setting Timer On Off The unit can be programmed to turn on and off at a set time e g turned off a
33. t 10 30pm and turned on at 6 00am 1 Press SELECT to enter the menu Press UP or DOWN and scroll to SET ON OFF TIME 2 Press SELECT again The current setting will be shown e g ON HH MMTT OFF HH MMTT 3 The hour setting HH for the ON time will be blinking Use UP or DOWN to select the hour If you are in 12 hour mode make sure you have the correct hour 4 Use the RIGHT key to move to the minute location MM 5 Use UP or DOWN to set the desired minute Use the RIGHT key to move to the locations for setting the Timer OFF time in the same manner as above 6 Confirm the setting by pressing SELECT Note Caller ID information will not be received when the InfoGlobe is turned off OL3020 User Manual 41 13 Troubleshooting the InfoGlobe 1 There is no rotation and display after plugging into an electrical outlet Ensure that the AC adapter is plugged in properly 2 There is no Caller ID information being received Caller ID is a subscription service from your local telephone company Ensure that telephone cord is plugged in correctly 3 There are sounds of vibration coming from base Vibrations coming from the Info Globe are normal However check that the device is standing firmly on a level surface and that there are no other objects close to the unit that may be producing the sound 3 Floating display looks faint Check that AC adapter has been plugged in properly Place unit against a dark background to obt
34. t US DDK W900BOL5800 The digits represented by 00 are the REN without a decimal point e g 03 is a REN of 0 3 The REN is separately shown on the label too If this equipment causes harm to the telephone network the telephone company will notify you in advance that temporary discontinuance of service may be required But if advance notice isn t practical the telephone company will notify the customer as soon as possible Also you will be advised of your right to file a complaint with the FCC if you believe it is necessary The telephone company may make changes in its facilities equipment operations or procedures that could affect the operation of the equipment If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service Please follow instructions for repairing if any e g battery replacement section otherwise do not alternate or repair any parts of device except specified Connection to party line service is subject to state tariffs Contact the state public utility commission public service commission or corporation commission for information This equipment is hearing aid compatible This product meets the applicable Industry Canada technical specifications NOTICE 1 Ifyour home has specially wired alarm equipment connected to the telephone line ensure the installation of this phone does not disable your alarm equipment If you have quest
35. tery pack and wires in the compartment 3 Close the battery compartment 4 You may change the face panel with one of the color options provided 5 Plug the power and telephone cords into the corresponding jacks on the bottom of the Base 6 Run the cords through the channels provided OL3020 User Manual 10 7 Connect the telephone line cord into the telephone wall jack and the power supply into a live power outlet Make sure the outlet is near the Base easily accessible and not controlled by a switch 8 Place the Handset in the Base The Handset and Base communicate with each other automatically This process may take a minute 9 Leave the Handset in the Base for 10 hours so that the battery pack is fully charged 10 The CHARGE indicator on the Base glows when the Handset is charging Maximum talk time on a full charge is 4 hours Maximum standby time on a full charge is 5 days Your results may be somewhat less that these maximums 6 Layout of Keys and Indicators rmn ji i h r ae JF j i 4 j 1 1 a a a A f r j e r t a Fa RET i _ F g ii h ia D a 7 f te Sh OL 3020 User Manual 11 Key Functions refer to illustration page 9 SOS on eo NS mk xak zk zk Q gt Q N 16 17 18 19 20 21 22 23 24 Earpiece LCD Display Vol DOWN CID Dialing Channel Clear Scroll UP Redial Pause Mic Mute Microphone New Calls Indic
36. ugh your local telephone service provider subscription required your phone can alert you to new voicemail messages by providing an envelope icon on the display NOTE most but not all service providers can provide this notification service After receiving a new message signal from your service provider the envelope icon will appear alerting you that you have new message s 10 00 1 0 3 0 OL 3020 User Manual 24 After reviewing all new messages the icon will disappear 10 00 1 0 3 0 21 Speed Dial Memory 0 9 1 Memory Programming i With the Handset in the idle on hook mode enter the desired phone number With one or more numbers displayed you can press REDIAL to add a 4 second pause Each subsequent press adds an additional 4 seconds to the pause 12345678901 LOCATION X ii Press MEM You will see LOCATION X X is the lowest empty memory location iii Press MEM to confirm or press a different location 0 9 if desired Programming is completed CAUTION Make sure you re not replacing an important phone number already in that location 2 Memory editor i Enter memory search mode by pressing MEM Press W or amp to select the memory location you want to edit 10 00 py10 19 MEM 2 OL3020 User Manual 25 il You can add additional digits to the existing number As you enter numbers the display will shift entered digits from
37. utomatically The number will scroll across the screen from right to left as it is dialed To exit memory search mode without dialing press CHAN to return the display to standby 1 No activity for 20 seconds will return the Handset to standby mode OL 3020 User Manual 27 5 Speed Dialing with Handset ON i Press TALK to turn the phone on The display will show TALK 0 00 10 0 10 30 0 0 ii First press MEM Second press the desired memory location The phone number will scroll across the screen from right to left as it is dialed If memory is empty an error tone will be generated You ll need to repeat this step in order to speed dial 22 Pre dialing Handset OFF 1 You can enter a phone number while in the standby mode The maximum number of digits is 24 For example enter number 0 10 0 10 30 0 Enter number 1 10 0 10 30 0 1 OL3020 User Manual 28 Enter number 012345678999990 10 0 10 30 3456789999 9 0 012 2 Press DELETE to delete last entered digit If all digits are deleted the Handset will return to standby 3 Press FLASH to clear all entered digits and return to standby mode 4 Press TALK The unit will enter TALK mode automatically The phone number will scroll across the screen from right to left as it is dialed 9 Saving a number in Speed Dial memory From the idle mode enter the phone number up to 16 digits then
38. ved in this mode The SELECT key is disabled in this mode 7 Time amp Date Setting Time Mode The clock can be set to run on a 12 hour or 24 hour basis 1 Press SELECT to enter the menu 2 Use UP or DOWN to select SET TIME MODE in the menu 3 Press SELECT again 4 Use UP or DOWN to toggle between 12 and 24 hour clock 5 Confirm your selection by pressing SELECT Setting Date Format Users can choose to have the order of month and day set in the date U A tn ie Press SELECT to enter the menu Use UP or DOWN to select SET DATE FORMAT in the menu Press SELECT again Use UP or DOWN to choose Month Day or Day Month format Confirm your selection by pressing SELECT Setting Time and Date PES Press SELECT to enter the menu Use UP or DOWN to select SET DATE TIME in the menu Press SELECT again The Month or Day field is blinking Use UP or DOWN to select the correct Month or Day Press RIGHT to move to the next location OL3020 User Manual 36 6 The Day or Month field is blinking Use UP or DOWN to select the correct Day or Month 7 Press RIGHT to move to the next location 8 The Year field is blinking Use UP or DOWN to select the current Year 9 Press RIGHT to move to the next location 10 The hour field is blinking Use UP or DOWN to select the current hour be careful of am pm 11 Press RIGHT to move to the next location 12 The minute field is blinking Use UP or DOWN to select the
Download Pdf Manuals
Related Search