Home

Untitled

1. mECTFA PERFECT DAY LIGHT TABLE PRO nterior innovation award 2015 reddot award 2015 Winner winner N ILUCTA EN English Intended use The lamp is designed for lighting a workplace in dry indoor rooms ambient temperature of 25 C Perform only the activities described in this user manual Any other use constitutes unauthor ised misuse The manufacturer accepts no liability for damage resulting therefrom For your safety Basic safety instructions The user must have read and understood this user manual before starting to use the lamp to ensure safe handling Observe all safety instructions You put yourself and others at risk if you disregard these instructions Retain this user manual for future reference and always keep it within easy reach If you ever sell or pass on the lamp please ensure that you also hand over this user manual e Use this lamp only if it is in perfect working order Please contact our service team if the lamp or a part thereof including the LEDs are faulty This lamp is not designed to be used by persons with limited physical sensory or mental capabilities or a lack of experience and or knowledge unless they are supervised by a person responsible for their safety or have received instructions from them on how to use the lamp Make sure that childr
2. and washer 17 through the hole from above 3 Fasten the TABLE PRO PIN by screwing the plate 14 facing upwards to the threaded rod using the wider centring gauge 4 Place the lamp onto the pin of the TABLE PRO PIN 11 Connecting the electrics gt see image 6 1 Connect the connecting cable of the lamp to the power supply unit Note lil Vou must first release the plug lock 18 to disconnect the lamp and power supplv unit 2 Connect the power cable that matches the power supply to the power supply unit Power cable with Euro plug 19 Power cable with UK plug in connector 20 3 Insert the plug into the socket 20 LUCTRA English EN Adjusting the lamp NOTICEI Risk of damage to the lamp Do not rotate the lamp head against the resistance in the swivel joint Operation NOTICEI Risk of propertv damagel The lamp head is designed in such as way that the LEDs can be ideally cooled thus achieving a long service life Never cover the lamp head This mav cause a fire hazard You can adjust the settings on the VITACORE control panel or through the VITACORE app on your smartphone or tablet PC Operating the VITACORE control panel b see image 7 21 On Off touch button 22 Touch buttons to adjust the light intensitv 23 Boost touch button 24 Touch buttons to adjust the light colour 25 USB charging ports Note lil The touch button svmbols to adjust
3. the lamp e Always unplug the lamp before changing the position of the table top base e Never open the VITACORE control panel The lamp will suffer irreparable damage Explanation of symbols e Warning signs on your lamp must not be removed or covered Read and observe the user manual before starting to use the lamp x Risk of eye damage Never look directly into the LEDs A You must only use the lamp in dry indoor rooms TRI Replace anv protective panel that is cracked The light source is located behind a ZX protective panel that protects the user against burns and the LEDs against damage It y is not permitted to operate the lamp without the protective panel or with a damaged 77 protective panel The protective panel must be replaced by a new undamaged protec tive panel original part Product and functional description LUCTRA provides biologically effective light where the light colour can be varied between a cold white light with a high blue content and a warm white light with a high red content Cou pled with its high light intensity LUCTRA gives your body the clear light signals that it needs to adapt its internal body clock and thus to its biological rhythm during the course of the day The better this works the higher your sense of well being and the better your performance The optimum biological effectiveness is achieved if the light colours vary significantly during the course of the day We therefore recommend
4. azardous substances potentially being released into the environment Disposing of packaging The packaging is made of cardboard and appropriately marked plastics that can be QAX recycled Ed Send these materials for recycling LUCTRA 23 EN English Technical data Product name LINEAR TABLE PRO RADIAL TABLE PRO Article numbers 9215 9217 9219 9216 9218 9220 Nominal voltage 12 V DC Power consumption max 25 W 2 A Protection class Ill lt i gt SELV Safety Extra Low Voltage Protection type IP20 Energy efficiency class A Ambient temperature 25 C Light source LED 2 cold white amp 2 warm white LEDs CREE 2700 6500 K 1000 lux at a height of 75 cm VITACORE USB charging ports 2x 5 V max 1 2 A Power supply Nominal voltage 100 240 V 50 60 Hz Power consumption 1 5A Power output max 12 V 48 W 4 ADC Protection class 1 BI Protection tvpe IP20 C E Bluetooth SMART 24 LUCTRA
5. e suitable for fastening the TABLE PRO CLAMP to concrete walls or solid masonrv You must use special rawl plugs or install another support structure suitable for the load with different types of walls plasterboard breeze block etc and a deviating load bearing capacitv Consult a specialist if you are unaware of the subsurface 1 Mark the four drill holes with the distances x 45mm y 50 mm DANGER Risk of fatal injury caused by drilling through supply lines Check for supply lines e g power cables gas and water pipes before drilling into the wall 2 Drill the holes with a diameter of 6 mm and 60 mm deep 3 Fasten the TABLE PRO CLAMP 5 to the wall with the enclosed screws 4 5 x 50 mm and wall plugs 4 Place the lamp onto the pin of the TABLE PRO CLAMP 5 Table top mounting b see image 4 1 Attach the adhesive foam pads 6 as shown 2 Choose the orientation of the lower plate 7 depending on the thickness of the table and tighten the clamping screw 9 Note lil Vou can screw the clamping screws into three different holes This allows vou to over come obstacles such as edge trims 3 Fasten the lower plate 7 with the screws 8 4 Fasten the TABLE PRO CLAMP 5 to the table using the clamping screw 9 Tighten the clamping screw 9 with the enclosed Allen kev 5 Place the lamp onto the pin of the TABLE PRO CLAMP 5 6 Run the power cable through the designa
6. e the connected devices No data is transmitted Connect the devices to be charged to the charging ports 25 using an appropriate USB cable Operating the app The VITACORE app turns your lamp into a flexible lighting tool It sets a personal 24 hour light ing sequence for the user It varies the light intensitv and light colour automaticallv thus simulating the natural change of light during the course of the dav The app communicates with the VITACORES control via a Bluetooth connection and detects any LUCTRA lamp In this way the personal lighting profile is transmitted to every lamp Note lil The VITACORE app is available as a free download in the App Store and on Google Play Activate Bluetooth on your smartphone or tablet PC App Store jip Google play Switch the lamp off and back on again once by tapping the On Off touch button 21 on the VITACORE control panel e The app can now find the lamp within 45 seconds If the pairing is unsuccessful during this time switch the lamp off and back on again e The corresponding lamp now appears in the app with details of the serial number e You can now enter a name for the lamp instead of the serial number and then connect this to your smartphone or tablet PC Note lil Vou can connect and control up to two lamps with the app The connection terminates if vou exceed a specific distance between the smartphone or tablet PC and the lam
7. en do not play with the lamp e Always observe the valid national and international safety and health regulations and work directives Electrical safety Only plug the lamp into earthed sockets that have been properly installed earthed and tested Make sure that the power supply corresponds to the connection data for the lamp before plugging in the lamp Do not touch the power plug wit wet hands Always grasp the plug and not the cable to pull the plug out of the socket Do not bend crush tug or run over the power cable Protect it from sharp edges oil and heat Do not lift the lamp by the cable e Check the plug and cable before each use Pull out the power plug immediately if the power cable is damaged Never use the lamp if the power cable is damaged Always switch off the lamp before removing the plug Always pull out the power plug immediately if the lamp is not used for a longer period of time Always pull out the power plug before transporting or repositioning the lamp Only use extension cables that are suitable for the lamp and its surroundings Do not use additional dimmers If the power cable on the lamp is damaged it must be replaced by the manufacturer to avoid any risk of danger 16 LUCTRA English EN Product Specific safety instructions Do not cover the lamp with cloths or other objects This may cause a fire hazard e Always remove the lamp from the mounting first before transporting or repositioning
8. hat you have chosen e TABLE PRO Table top base to set up on tables e TABLE PRO CLAMP Wall or table top mounting with 2x adhesive foam pads 1x Allen key 4x screws and rawlplugs for wall mounting e TABLE PRO PIN Fastening to a mounting hole or drill hole on the table 1x adhesive foam pad 1x Allen key Note lil Please contact our service team if one of the parts are missing or damaged Assembly Always place the lamp on a pre assembled pin as the last assembly step irrespective of the mounting being used NOTICE Risk of damage to the lamp Make sure that the lamp is fully supported on the pin and can be moved freely Note lil A minimum gap approx 1 2 mm is needed between the lamp and mounting for easv rotation of the lamp The different mounting options are described below The electrics must be connected after the lamp has been assembled see Connecting the electrics on page 20 TABLE PRO b see image 2 1 Place the table top base 4 at the desired position 2 Place the lamp onto the table top base 4 as shown 18 LUCTRA English EN TABLE PRO CLAMP Vou can screw or fasten vour lamp to the wall or on tables with a thickness of up to 78 mm with the TABLE PRO CLAMP Wall mounting b see image 3 NOTICEI Risk of propertv damagel Make sure that vou check the tvpe of wall and the load bearing capacitv of the wall structure before the assembly The enclosed rawlplugs ar
9. having very cold white light in the mornings that is reduced at lunchtime then slightly increased again after lunch and then continuously reduced in the afternoon The red content should prevail in the evening You can change these settings on the VITACORE control panel at any time Ultimately your well being is determined by the light setting that is right and comfortable for you Therefore experiment with different settings until you have found the right one for you You can use the VITACORE App to adjust the setting of the light colour automatically gt see Operating the app on page 22 The boost function provides short term activation of light with the maximum blue content and maximum brightness This can be useful in situations requiring a high degree of concentration As this light setting works intensively when used continuously it is automatically terminated after 30 minutes You can find out more about the combinations and effect of biological light at www luctra eu Your lamp at a glance gt see image 1 1 Lamp head 2 Protective panel 3 VITACORES control panel touch screen 4 Table top base LUCTRA 17 EN English Scope of delivery e User manual e Lamp e Power supply unit with plug in connector e Power cable with Euro plug e Power cable with UK plug in connector type G e Microfibre cloth Different mountings and accessories are included with the delivery depending on the LUCTRA TABLE PRO series product t
10. p This distance is approx 8 m depending on the structure of the building 22 LUCTRA English EN Cleaning and maintenance DANGERI A Risk of fatal injury from electric shock Never immerse the lamp in water when cleaning it NOTICE Risk of product damage Do not use any abrasive or sharp objects or aggressive cleaning agents Do you use any solvents Wipe the lamp dry with a soft damp cloth or with the enclosed microfibre cloth e The lamp requires no maintenance Service You can reach the LUCTRA team from most European countries on our freephone service hotline German English 00800 0058 2872 Alternatively please call 49 2371 662445 Note that charges may apply depending on the network provider Always have the serial number of your lamp at hand should you have any queries You can find this on the label on the power cable and on the back of this user manual Return a damaged lamp only in its original box or in comparable protective packaging Disposal Disposing of the lamp Appliances that are marked with the symbol shown must not be disposed of with house hold waste You are obliged to dispose of such waste electrical and electronic equipment X separately Find out more from your local authority about controlled waste disposal options With separate waste disposal you send old appliances for recycling or to other forms of repro cessing In this way you help to prevent h
11. ted opening 10 LUCTRA 19 EN English TABLE PRO PIN gt see image 5 You have following mounting options available for the TABLE PRO PIN 11 Mounting with a cable hole The TABLE PRO PIN holds your lamp firmly on any mounting hole ranging from 20 mm to 80 mm 1 Attach the adhesive foam pad 13 to the upper plate 12 2 Place the upper plate 12 with the pin and threaded rod 16 from above into the mounting hole 3 Screw the lower plate 14 facing upwards onto the threaded rod 16 using a centring gauge matching the diameter of the mounting hole 4 Run the power cable through the designated opening 15 NOTICE Risk of damage to the cable Do not fasten the TABLE PRO PIN by rotating the lower plate once you have run the power cable through the designated opening 15 Otherwise the cable will wrap around the threaded rod and be damaged 5 Fasten the TABLE PRO PIN by rotating the threaded rod 16 Use the enclosed Allen key to do this 6 Place the lamp onto the pin of the TABLE PRO PIN 11 Mounting without a cable hole You can fasten your lamp to the TABLE PRO PIN even if the table does not have a cable hole NOTICE Risk of property damage The table top must be at least 25 mm thick so that it is not damaged when adjusting the lamp 1 Drill a hole in the table top with a minimum diameter of 6 5 mm maximum diameter of 8 mm 2 Insert the pin with the threaded rod 16
12. the light colour light intensitv and boost function are only visible once you have briefly tapped the On Off touch button 21 The symbols fade again if you have not tapped the user interface for a few seconds The duration set for the lighting on the VITACORE control panel can be adjusted in the VITACORE App The preset duration for the lighting is 30 seconds Tap the l On Off touch button to switch the light on or off Tap the touch button to reduce the light intensity Tap the touch button to increase the light intensity Tap the touch button to make the light colour warmer reddish Tap the touch button to make the light colour colder bluish Tap the boost touch button to activate maximum light intensity of the cold white LEDs Note lil The boost function is terminated automaticallv after 30 minutes e The boost touch button symbol flashes when the function is activated Terminate the boost function prematurely by tapping any touch button e f the boost function has terminated or the 30 minutes have expired the VITACORE con trol uses the preset values LUCTRA 21 EN English USB charging ports Smartphones and tablet PCs can be charged via two built in USB charging ports 25 NOTICE Risk of property damage Use only undamaged USB cables This prevents damage to your devices and the lamp Note lil The ports are only used to charg

Untitled

Contents

Download Pdf Manuals

Related Search

Related Contents