WX1 GateMX/MW User`s Manual
Contents
1. No IP Address Host Info ChNum System Hardware Machine Name 0 192 168 10 100 Get Info ER EN 1 192 168 10 101 Get Info 0 EA D v pi 192 168 10 102 Get Info 0 DN v ER EN s 192 168 10 103 Get Info 0 X v v D 4 Get Info 0 M E D 5 Get Info 0 X KH v DN 6 Get Info 0 X KH v gt 7 Get Info D z KH EN 8 Get Info D v H v 9 Get Into D Le H v gt 10 Get Info D z vi v m gt EE EDEN ga E uu Click IM WX1 06E 2 3 2 3 Retrieving Information about the Target MX100s MW100s and Setting the Number of Channels and the Monitor Interval Before carrying out the procedure below register the target MX100s in advance according to the instructions given in section 2 2 Registering MX100s MW100s Procedure 1 Click the Get Info button in the Info column in the MX100 MW100 unit list area When the retrieval of the information is complete the MX100 MW100 machine name appears in the Machine Name colu2. Index 1
3. 8 Audit Withholding 8 1 Yokogawa shall have the right to access and audit your facilities and any of your records including data stored on computers in relation to the use of the Software Product as may be reasonably necessary in Yokogawa s opinion to verify that the requirements of this Agreement are being met 8 2 Even after license being granted under this Agreement should there be any change in circumstances or environment of use which was not foreseen at the time of delivery and in Yokogawa s reasonable opinion is not appropriate for using the Software Product or if Yokogawa otherwise reasonably believes it is too inappropriate for you to continue using the Software Product Yokogawa may suspend or withhold the license provided hereunder 9 Assignment If you transfer or assign the Software Product to a third party you shall expressly present this Agreement to the assignee to ensure that the assignee comply with this Agreement transfer all copies and whole part of the Software Product to the assignee and shall delete any and all copy of the Software Product in your possession irretrievably This Agreement shall inure to the benefit of and shall be binding on the assignees and successors of the parties 10 Termination Yokogawa shall have the right to terminate this Agreement with immediate effect upon notice to you if you breach any of the terms and conditions hereof Upon termination of this Agreement you shall promptly cease using the
4. MV and CX models and a PC for you to scan record and monitor the data Remote Monitor is a software application that is included in the DAQLOGGER Client Package or DAQ32Plus Client Package It can be used to monitor the data that has been acquired by the recorder or data acquisition software programs Add on software includes a variety of programs for customized monitors network remote monitors data acquisition and saving on a group basis monitoring of measured data and triggered data acquisition and other functions Up to 32 MX100s MW100s can be connected The maximum number of connections from client programs DAQLOGGER and remote monitors is also 32 The monitor interval matches the measurement interval of the connected MX100 However the fastest interval on DAQLOGGER is 1 second e The maximum number of data points that can be held per channel is 1800 Note e GateMX MW does not contain functions for configuring the MX100 MW100 To configure the MX100 use the MX100 Standard Software that comes standard with the MX100 or MXLOGGER a software program sold separately Enter MW100 settings using the browser e GateMX MW does not contain computation functions e GateMX MW does not contain service functions that are available on other Gate programs e If you use the MX100 Standard Software or MKXLOGGER GateMX100 or GateMX MW are displayed under the Software columns To scan and record data from MX100 MW100 on DAQLOGGER carry out th
5. IN WARRANTY EXPRESS OR IMPLIED CONTRACT STRICT LIABILITY TORT INCLUDING NEGLIGENCE OR ANY OTHER LEGAL OR EQUITABLE GROUNDS IN NO EVENT YOKOGAWA AND SUPPLIER S AGGREGATE LIABILITY FOR ANY CAUSE OF ACTION WHATSOEVER INCLUDING LIABILITY UNDER CLAUSE 5 SHALL EXCEED THE DEPRECIATED VALUE OF THE LICENSE FEE PAID TO YOKOGAWA FOR THE USE OF THE CONCERNED PART OF THE SOFTWARE PRODUCT If the Software Product delivered by Yokogawa is altered modified or combined with other software or is otherwise made different from Yokogawa catalogues General Specifications basic specifications functional specifications or manuals without Yokogawa s prior written consent Yokogawa shall be exempted from its obligations and liabilities under this Agreement or law 6 2 Any claim against Yokogawa based on any cause of action under or in relation to this Agreement must be given in writing to Yokogawa within three 3 months after the cause of action accrues 7 Export Control You agree not to export or provide to any other countries whether directly or indirectly the Software Product in whole or in part without prior written consent of Yokogawa If Yokogawa agrees such exportation or provision you shall comply with the export control and related laws regulations and orders of Japan the United States of America and any other applicable countries and obtain export import permit and take all necessary procedures under your own responsibility and at your own expense
6. MX100 MW100 Data Aogustin Unit Tii Jr TI lh LES LIES Connect up IT to 32 units ue It is recommended that GateMX MW and DAQLOGGER be run on different PCs to distribute the load Software Configuration DAQLOGGER MX100 Standard Ethernet Browser orate GateMX MW MXLOGGER Configure Configure Monitor data the MW100 the MX100 from the MX100 MW100 Ethernet Ethernet Ethernet MX100 MW100 Ethernet GateMX MW monitors data from multiple MX100s MW100s that are connected It also acts as a monitor server to deliver the data to DAQLOGGER remote monitors or Add on Software GateMX MW does not contain functions for configuring the MX100 MW100 To configure the MX100 use the MX100 Standard Software that comes standard with the MX100 or MXLOGGER a software program sold separately Enter MW100 settings using the browser In addition GateMX MW does not contain computation functions Deliver the data Ethernet Remote monitor IM WX1 06E mg H Chapter2 Operating Procedure 2 1 Starting and Exiting GateMX MW Starting GateMX MW Choose Programs gt YOKOGAWA DAQWORX gt GateMXMW gt GateMXMW from the Windows Start menu The window shown below opens BCE File Monitoring View Help oe gt Sg System Channel Run Bm MX100 MOOD unit list No IP Address Host Info ChNum Get Info Get Info Get Info Get Info Get Info Get Info Get Info Get Info Hardware
7. after information is retrieved click in the Num of Ch column and enter the number lf you wish to change the monitor interval settings click the button in the System column to display the list and select a monitor interval When the number of channels is changed the display in the Channel tab will be modified Click here to enter the value Click here to select from the list System Channel Run Bm w100 Mu O0 unit list No IP Address Host Info Ch System Hardware Machine Name A 0 192 168 10 100 Get Info 28 10msec BA Mx100 Yokogawa 01 1 192 168 10 101 Get Info 1 10msec Ly MKO Yokogawa 02 2 192 168 10 102 Get Info 350 10msec f Math Ed si MMO Yokogawa 03 3 192 158 10 103 Get Info 19 500msec br MAM D Yokogawa 04 4 Get Info D x DI 5 Get Info 0 E EN 6 Get Info 0 7 Get Info gj x 8 Get Info x D 9 Get Info x 10 Get Info D 7 z a EE Eeer zem EES EES ER D E Copy the settings of the first channel in the selected range to all other channels in the range IM WX1 06E 2 3 Retrieving Information about the Target MX100s MW100s and Setting the Number of Channels and the Monitor Interval Note You can se
8. subcontractors officers directors employees and agents harmless from any liability or damage whatsoever including any court costs and attorney s fees arising out of or related to the said use 4 Limited Warranty 4 1 The Software Product shall be provided to you on an as is basis at the time of delivery and except for physical damage to the recording medium containing the Software Product Yokogawa and Supplier shall disclaim all of the warranties whatsoever express or implied and all liabilities therefrom If any physical defect is found on the recording medium not later than twelve 12 months from delivery Yokogawa shall replace such defective medium free of charge provided that the defective medium shall be returned to the service office designated by Yokogawa at your expense within the said twelve 12 months THIS LIMITED WARRANTY PROVIDED IN THIS CLAUSE IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND WHATSOEVER AND YOKOGAWA HEREBY DISCLAIMS ALL OTHER WARRANTIES RELATING TO THE SOFTWARE PRODUCT WHETHER EXPRESSED OR IMPLIED INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY FITNESS FOR ANY PARTICULAR PURPOSE NON INFRINGEMENT QUALITY FUNCTIONALITY APPROPRIATENESS ACCURACY RELIABILITY AND RECENCY IN NO EVENT SHALL YOKOGAWA WARRANT THAT THERE IS NO INCONSISTENCY OR INTERFERENCE BETWEEN THE SOFTWARE PRODUCT AND OTHER SOFTWARE NOR SHALL BE LIABLE THEREFOR The warranty provisions of the applicable law are expressly exclu
9. the number of channels is less than the actual number of MX100 MW10 channels only the set channels are displayed e If the connection fails the channel information for the corresponding MX100 MW100 appears as a blank line e If the channels of the modules installed to the MX100 MW100 do not match the channels displayed in the Channel tab perform reconfiguration using the MX100 Standard Software or the Browser e The System No from the channel information display is shown when information is retrieved or when setting the System column in the System Configuration screen e Click System No to sort the channel information by system number Click System No again to sort the channel information by channel number FT lolx File Monitoring View Help ao gt System Channel Run No Channel No Tag No Tag Comment System No 00001 00001 Tag00001 TagComment 00001 0 ICK NETE 10 SOTI tE ag agComme j 00002 00002 Tag00002 TagComment 00002 0 channel information 00003 00003 Tago0003 TagComment 00003 0 by system number 00004 00004 Tag00004 TagComment 00004 1 00005 00041 Tag00041 TagComment 00041 1 f r r r f nnna Tannnna TanCommernt nna IM WX1 06E 2 5 e npe9o q Dugiodo H 2 4 Starting Stopping Data Monitoring Procedure Before carrying out the procedure below retrieve the channel information of the target MX100s in advance according to the instructions given in section 2 3 Retriev
10. 100 Mx100 MxX100 No1 Mx100 Mx100 No2 Mx100 Note If a user is already connected to an MX100 MW100 the corresponding computer name and MX100 MW100 software application name are displayed under the User and Software columns respectively You cannot use GateMX MW to connect to an MX100 MW100 that already has a connected user 2 Drag the machine name of the MX100 MW100 you wish to connect from the MX100 MW100 nearby list and drop it onto the MX100 MW100 unit list area When registered the IP address of the target MX100 MW100 appears in the IP Address Host column in the MX100 MW100 unit list area File Monitoring View Help ki gt Bi Sg System Char r el Run m MX100 MVV100 unit list No IP Address Host Info ChNum Set Info Get Info Get Info Get Info Get Info Get Info Get Info Get Info Get Info Get Info Get Info amp SS D Hardware Machine Name Wa 2 bi 2 O IE 4 1 l4l l4ll141l 4 alfa a IE 4 4 4 4 4a 4 asi D O O O O O O O O O O O 4 E J J lt 4 4 4 EN EN KA KA KA ETETE o O ON On fF wne Ka Search Hardware Serial No Address Software MWA 00 27E123123 10 0 233 233 MM 00 27E123124 10 0 233 30 Mx100 120
11. 303030 10 0 222 002 10 0 233 222 mx100n1 7 Mx100 Ready te 2008 0212 13 02 17 2 2 IM WX1 06E 2 2 Registering MX100s MW100s Note You can also register MX100s by entering the IP address or host name directly in the IP Address Host column e As shown in the figure below you can select multiple numbers in the No column and click the button below the IP Address Host column to register incrementing IP addresses starting from the IP address of the first number in the selected range If a host name is displayed for the first number in the selected range the same host name is registered for all the numbers in the selected range Select Bm Ma OU 700 unit list Na IP Address Host Info ChNum System Hardware Machine Name A 192 168 10 100 Get Info Get Info Get Info Get Info Get Info Get Info Get Info Get Info Get Info Get Info Get Info E O D 9 Q U 9 o D 9 D O O ojo O O ola LEE EN 1 D 1 1 1 i 1 i a en en na en oid all 4 aja 4 alialiiailallx 4 4 all Ja Ja DOE 4 4 e OD 4 q S 4 Bm v gt 1 00 700 unit list
12. CON OU et OM j i 4 5x x1xa t4xe 4al bika nek bikele da nek tina b ue C pi w b d bele evan kan G r ke ab bi 1 3 SERIES eege eege eebe eege 1 3 Chapter 2 Operating Procedure Chapter 3 Index IM WX1 06E 2 1 Starting and Exiting GateMK MW iu kak kk kk kk Kak k k KK KK KAK KK KK KK KA 2 1 2 2 Registering GE AER OAI 2 2 2 4 Starting Stopping Data Monitoring wi 2 6 2 5 Connecting to GateMX MW from DAQLOGGER Remote Monitor or Add on Software 2 9 Connecting to GateMX MW from DACOLOGGER k k k k kk KAKA KK kK KA 2 9 Connecting to GateMX MW from the remote monitor 2 9 Connecting to GateMX MW from the Add on Software uEE k 2 9 2 6 Changing the Port Number and Saving the Settings u i zU 2 10 2 7 Showing Version Information EE 2 11 Error Messages and Corrective Actions 3 1 Error Messages and Corrective Actions mami wwwumwwuwumiwiwiwi mimina 3 1 Chapter 1 Overview 1 1 Functional Overview of the GateMX MW Features Procedure GateMX MW is a software program that monitors data from the MX100 MW100 Data Acquisition Unit MX100 MW100 and supplies the data to DAQLOGGER or remote monitors software programs GateMX MW enables you to monitor and logging the data that can be measured by the MX100 MW100 using DAQLOGGER or a remote monitor Note DAOLOGGER is a software application that can connect various recorders UR VR DARWIN DX
13. FOR A REFUND IF APPLICABLE Software License Agreement 1 Scope This Agreement applies to the following software products and associated documentation of Yokogawa collectively Software Product Unless otherwise provided by Yokogawa this Agreement applies to the updates and upgrades of the Software Product which may be provided by Yokogawa Software Product DAQWORx lt is limited to each software that you bought 2 Grant of License 2 1 Subject to the terms and conditions of this Agreement Yokogawa hereby grants to you a non exclusive and non transferable right to use the Software Product on a single or the following specified number of computer s and solely for your internal operation use in consideration of full payment by you to Yokogawa of the license fee separately agreed upon Granted number of License 1 one 2 2 Unless otherwise agreed or provided by Yokogawa in writing the following acts are prohibited a to reproduce the Software Product except for one archival copy for backup purpose which shall be maintained with due care subject to this Agreement b to sell lease distribute transfer pledge sublicense make available via the network or otherwise convey the Software Product or the license granted herein to any other person or entity c to use the Software Product on any unauthorized computer via the network d to cause permit or attempt to dump disassemble decompile reverse engineer or otherwise translat
14. LOGGER and remote monitors can log or monitor the MX100 MW100 data via the Ethernet network GateMX MW operates as a monitor server for DAOLOGGER remote monitor clients and Add on software Connecting to GateMK MW from DAGLOGGER See section 2 6 in the WX101 DAQLOGGER WX81 DAQLOGGER Client Package User s Manual IM WX101 01E Note There are two methods to connect to GateMX MW from DAQLOGGER One method is to specify the system number the other is not to specify the system number For the procedure of selecting the connection method see section 2 6 in the WX101 DAQLOGGER WX81 DAQLOGGER Client Package User s Manual IM WX101 01E e Connecting to GateMX MW by specifying the system number Of the MX100s MW100s connected to GateMX MW only the channel data with the specified system number is monitored ho channels wih zen _DacLocceR numbers 3 and 5 3 Is System No GateMX MW 7 System No 1 2 3 interval MX100 of Unit No 00 MX100 of Unit No 01 MX100 of Unit No 02 e Connecting to GateMX MW without specifying the system number The data of all the channels of the MX100s MW100s connected to GateMX MW is monitored using one connection When monitoring data from DAOLOGGER all the channels GateMK MW 4 1 2 3 7 System No sen fom e e interval MX100 MW100 of MX100 MW100 of MX100 MW100 of Unit No 00 Unit No 01 Unit No 02 Connecting to GateMX MW from the remote monitor If you are conn
15. Machine Name O JjJ 2 r T O O O O O O O O O O O D 1 D 1 i 1 i 1 1 i 4 4 40 4 4 alia ad iaquparia ggg ggg nning HAHAHAHA e oO d 0 amp Q N E E MxX100 Mut 00 nearby Search hd J Machine Name Serial No Address Software tts 2008 02 12 12 53 41 Ready Note e GateMX MW starts up in the condition that existed immediately before you closed GateMX MW the previous time e If the program is closed while a process or service is running the license will be considered to be in use If the message Invalid license number Please reinstall appears when restarting the program it may indicate that the user is attempting to run a Gate program in excess of the number of available licenses Starting GateMX MW in Acquisition Start Mode 1 From the Windows Start menu choose Programs gt YOKOGAWA DAQWORX gt GateMX MW gt GateMX MW then right click GateMXMW and select Create Shortcut 2 Right click the shortcut icon and select Properties Choose the Shortcut tab then add START space and START to the right of the path in the Target box and click OK GateMXMW 2 Properties ll General S
16. Software Product and in accordance with sub clause 2 5 return or irretrievably delete all copies of the Software Product certifying the same in writing In this case the license fee paid by you for the Software Product shall not be refunded Clauses 2 4 and 2 5 3 5 6 and 11 shall survive any termination of this Agreement 11 Governing Law Disputes This Agreement shall be governed by and construed in accordance with the laws of Japan Any dispute controversies or differences which may arise between the parties hereto out of in relation to or in connection with this Agreement Dispute shall be resolved amicably through negotiation between the parties based on mutual trust Should the parties fail to settle the Dispute within ninety 90 days after the notice is given from either party to the other the Dispute shall be addressed in the following manner i If you are a Japanese individual or entity the Dispute shall be brought exclusively in the Tokyo District Court The Main Court in Japan ii If you are not a Japanese individual or entity the Dispute shall be finally settled by arbitration in Tokyo Japan in accordance with the Commercial Arbitration Rules of the Japan Commercial Arbitration Association All proceedings in arbitration shall be conducted in the English language unless otherwise agreed The award of arbitration shall be final and binding upon both parties however each party may make an application to any court having jur
17. User s Manual WX1 GateMX MW vigilantplant YOKOGAWA IM WX1 06E Yokogawa Electric Corporation 8th Edition This manual explains the functions and operations of GateMK MW To ensure correct use please read this manual thoroughly before beginning operation After reading the manual keep it in a convenient location for quick reference whenever a question arises during operation GateMX MW is a software program that monitors measured data from the MX100 MW 2100 Data Acquisition Unit and supplies the data to DAQLOGGER or remote monitors Notes e The contents of this manual are subject to change without prior notice as a result of continuing improvements to the instrument s performance and functions Every effort has been made in the preparation of this manual to ensure the accuracy of its contents However should you have any questions or find any errors please contact your nearest YOKOGAWA dealer e Copying or reproducing all or any part of the contents of this manual without the permission of Yokogawa Electric Corporation is strictly prohibited e Use of this software on more than one computer at the same time is prohibited Use by more than one user is also prohibited e Transfer or lending of this software to any third party is prohibited e Yokogawa Electric Corporation provides no guarantees other than for physical deficiencies found on the original disk upon opening the product package e License numbers will not be reiss
18. ate program has been exceeded that is already running or purchase a new license and reinstall the program 3 1 Suoy 341291109 pue sobessayy 10119 H Index Index A L_ELE ELEETE EE LE B gk E L D ISE ZZ ZE about DUTTON EE 2 11 ej ii kL v VkWLV BYn V SPAN SRT MMEMM MIM b N NN n nana nHnHn a HN Hz HH HNHnRE HH J JNMMMDIJJ J 2 z2ZI 2 5 communication StatUS w wamamamawawawawawawamawa kK ka 2 7 D O O DAQLOGGE ENEE 2 9 data MONMON J A aaa kk kK KK KK KK KA KA KA KA KA KA 2 6 error MMCSSAG CS ebe ge EAR 3 1 SIA e 2 1 F functional overvieW EEN 1 1 G B EE 2 4 H hardware reourements ENEE 1 2 FOS EE 2 2 O CO EE 2 4 WA Aa 2 2 Mo o nS wA EEE EEEE EES 3 1 Misa leala BE 2 6 Monitor Merval eiceta r aaran EErEE mee 2 7 MX100 MW100 DEEN egene age ebe kk kk kk kk keke 2 2 MX100 MW 100 dg 2 2 N No 2 4 Po DOT MIMD Bl e kn nana E S 2 10 R Kelte le EE 2 2 remote MONIO E 2 9 ar dT AEE eg se EAN see pe se eee 2 6 S EE 2 10 AI 2 10 Aaa 2 2 software configuration mkm kk kk KH 1 3 SON A NASA sc sicnernserecrecantny pat ienis conte stiras r deiei disti li software requiremen S uE kk kk kk kk KK KH 1 2 alla EE 2 1 Slop MONA EE 2 8 IM WX1 06E stopping data monitoring iu kek 2 8 system configurat iOf uiE mkm kk kk kk kk KK HH 1 3 syst m EIERE 2 9 system IECH 2 7 U UMA AA 2 7
19. cedures of GateMX MW 3 Error Messages and Describes the error messages and their corrective Corrective Actions actions Index An alphabetical index of the manual s contents Scope of the Manual This manual does not explain the basic operations of your PC s operating system OS For information regarding the basic operations of Windows see the user s guide that came with Windows Conventions Used in This Manual e Unit K Denotes 1024 Example 10 KB M Denotes 1024 K Example 10 MB G _ Denotes 1024 M Example 2 GB e Bold Characters Bold characters are used for characters displayed on the software program screen e Subheadings On pages that describe the operating procedure in Chapter 2 the following symbols are used to distinguish the procedure from their explanations This subsection contains the operating procedure used to carry out the function described in the current section All procedures are written with inexperienced users in mind experienced users may not need to carry out all the steps Note Calls attention to information that is important for proper operation of the instrument IM WX1 06E Contents Software License Agreement ii How to Use EE E iv Chapter 1 Overview 1 1 Functional Overview of the GateMXIMwW kk kk kk KK 1 1 SI 1 1 Procedure E 1 1 1 2 System QV TE 1 2 Software Requirements liL kk kek kk kk k k kK KK KAKA KK KK KK kk KK KK KK k k 1 2 Hardware UE 1 2 System
20. ded to the extent permitted 4 2 At the sole discretion of Yokogawa Yokogawa may upgrade the Software Product to the new version number Upgrade and make it available to you at your expense or free of charge as Yokogawa deems fit In no event shall Yokogawa be obliged to upgrade the Software Product or make the Upgrade available to you 4 3 Certain maintenance service may be available for some types of Software Product at Yokogawa s current list price Scope and terms and conditions of the maintenance service shall be subject to those separately provided by Yokogawa Unless otherwise provided in Yokogawa catalogues or General Specifications maintenance services will be available only for the latest version and the immediately preceding version In no event will service for the immediately preceding version be available for more than 5 years after the latest version has been released In addition no service will be provided by Yokogawa for the Software Product which has been discontinued for more than 5 years Notwithstanding the foregoing maintenance service may not be available for non standard Software Product Further in no event shall Yokogawa provide any service for the Software Product which has been modified or changed by any person other than Yokogawa IM WX1 06E Software License Agreement 5 Infringement 5 1 lf you are warned or receive a claim by a third party that the Software Product in its original form infringes any third party s pat
21. e or reproduce the Software Product into source code or other human readable format or to revise or translate the Software Product into other language and change it to other formats than that in which Yokogawa provided e to cause permit or attempt to remove any copy protection used or provided in the Software Product or f to remove any copyright notice trademark notice logo or other proprietary notices or identification shown in the Software Product 2 3 Any and all technology algorithms know how and process contained in the Software Product are the property or trade secret of Yokogawa or licensors to Yokogawa Ownership of and all the rights in the Software Product shall be retained by Yokogawa or the licensors and none of the rights will be transferred to you hereunder 2 4 You agree to maintain the aforementioned property and trade secret of Yokogawa or licensors and key codes in strict confidence not to disclose it to any party other than your employees officers directors or similar staff wno have a legitimate need to know to use the Software Product and agreed in writing to abide by the obligations hereunder 2 5 Upon expiration or termination of this Agreement the Software Product and its copies including extracts shall be returned to Yokogawa and any copies retained in your computer or media shall be deleted irretrievably If you dispose of media in which the Software Product or its copy is stored the contents shall be irretrievably de
22. e procedure given below If you are monitoring the data on a remote monitor follow the instructions below and start the data monitoring on GateMX MW Operations on GateMX MW Se Je er ba t es eg G a a a a a Connect to GateMK MW from DAQLOGGER Set tags and other items Turn ON the MX100 MW100 Register target MX100s MW100s Section 2 2 on DAQLOGGER Start logging on DAGLOGGER Start the MX100 Standard Software or Browser Set the MX100 MW100 measurement conditions etc Close the MX100 Standard Start data monitoring Software or Browser on GateMX MW Retrieve info about the target MX100s MW100s Note Qz 7z zT T jz zz z5 5 q U 5 ze_zzZzzuzZ___U If you are changing the module configuration on the target MX100 MW100 stop the data monitoring on GateMX MW and turn off the MX100 MW100 beforehand After changing the module configuration turn ON the MX100 MW100 and reconfigure using the MX100 Standard Software or the browser 1 1 IM WX1 06E mg H 1 2 System Overview Software Reguirements Run DAQWORX under any of the following operating systems Windows 2000 Professional SP4 Windows XP Home Edition SP3 Windows XP Professional SP3 excluding Windows XP Professional x64 Editions Windows Vista Home Premium SP2 excluding the 64 bit editions Windows Vista Business SP2 excluding the 64 bit editions Windows 7 Home Premium SP1 82 bit and 64 bit
23. ecting to GateMX MW from the remote monitor of the DAQLOGGER Client Package see section 8 1 in the WX101 DAQLOGGER WX81 DAQLOGGER Client Package User s Manual IM WX101 01E If you are connecting to GateMX MW from the remote monitor of the DAQ32Plus Client Package see section 9 2 in the WX102 DAQ32Plus WX82 DAQ32Plus Client Package User s Manual IM WX102 01E Connecting to GateMX MW from the Add on Software If you are connecting to GateMX MW from the Add on software see the user s manual for the relevant product IM WX1 06E 2 9 e npe9o q Bu 1e edo H 2 6 Changing the Port Number and Saving the Settings Procedure Changing the Port Number Carry out the procedure below if you wish to change the TCP IP port number that is used by DAQLOGGER or remote monitors to connect to GateMX MW 1 From the File menu choose Port No The Port No dialog box opens o x File Monitoring View Help Open Ctrl Save Ctrl 5 Save As 2 Enter the port number used for the monitor server The default value is 50297 Port Ho 50297 caval 3 Click OK and restart GateMX MW You must restart GateMX MW to activate the new port number Saving the Settings From the File menu choose Save or Save As If you choose Save As enter the file name in the dialog box that appears and save the file File name Jefg gme Save az type GateMx files grnx sl Cancel YA Note If you choo
24. editions Windows 7 Professional SP1 32 bit and 64 bit editions The language displayed by the software under different language versions of the OS are as follows OS Language Software Language Japanese Other Hardware Requirements The following hardware is required for running GateMX MW 1 2 PC Free disk space Japanese English A PC that runs one of the OS above and that meets the following CPU and memory requirements When Using Windows 2000 or Windows XP Pentium 4 1 6 GHz or faster Intel x64 or x86 processor 512 MB or more of memory When Using Windows Vista Pentium 4 3 GHz or faster Intel x64 or x86 processor 2 GB or more of memory When Using Windows 7 32 bit edition Intel Pentium 4 3 GHz or faster x64 or x86 processor 2 GB or more of memory 64 bit edition Intel x64 processor that is equivalent to Intel Pentium 4 3 GHz or faster 2 GB or more of memory 200 MB or more Communication device Ethernet port supported by the OS CD ROM drive Peripheral devices Monitor The CD ROM drive is needed to install the software Mouse supported by the OS A video card that is recommended for the OS and a display that is supported by the OS has a resolution of 1024x768 or higher and that can show 65 536 colors 16 bit high color or more IM WX1 06E 1 2 System Overview System Configuration PER DAQLOGGER GateMX MW B remote monitor Up to 32 connections COOC OC Hub
25. ent which is issued at the time of delivery of the Software Product trade mark copyright or other intellectual property rights Claim you shall promptly notify Yokogawa thereof in writing 5 2 If the infringement is attributable to Yokogawa Yokogawa will defend you from the Claim at Yokogawa s expense and indemnify you from the damages finally granted by the court or otherwise agreed by Yokogawa out of court The foregoing obligation and indemnity of Yokogawa shall be subject to that i you promptly notify Yokogawa of the Claim in writing as provided above ii you grant to Yokogawa and its designees the full authority to control the defense and settlement of such Claim and iii you give every and all necessary information and assistance to Yokogawa upon Yokogawa s request 5 3 If Yokogawa believes that a Claim may be made or threatened Yokogawa may at its option and its expense either a procure for you the right to continue using the Software Product b replace the Software Product with other software product to prevent infringement c modify the Software Product in whole or in part so that it become non infringing or d if Yokogawa believes that a through c are not practicable terminate this Agreement and refund you the paid up amount of the book value of the Software Product as depreciated 5 4 Notwithstanding the foregoing Yokogawa shall have no obligation nor liability for and you shall defend and indemnify Yokogawa and its suppliers f
26. hortcut Compatibility Virus Property CR BalteMxM w 2 Target type Application a Target location GateM lt 100 Target wo Fes GateM gt 1 O0 G ateMX1 00E exe START 4 Choose the shortcut from the Windows Start menu The connection status of the previous session is restored and acquisition begins Exiting GateMX MW Choose Exit from the File menu or click the X button at the right corner of the title bar BER File Monitoring View Help Open Ctrl Save Ctrl 5 Save As Port No Info ChNum System Hardware Machine Name amp Get Info 0 IM WX1 06E 2 1 e npe90o q Bu 1e edo H 2 2 Registering MX100s MW100s Before carrying out the procedure below connect the target MX100 MW100 to the Ethernet network and turn its power ON Configure the MX100 in advance using the MX100 Standard Software that comes standard with the MX100 or MKLOGGER a software program sold separately Enter MW100 settings using the browser Procedure 1 Click the Search button MX100s connected to the network are listed under MX100 nearby Click m MKIO0 MAM OO nearby uh Machine Name Hardware Serial No Address User Software Ready tte 2008402 2 12 53 41 Click to sort by the item name E MX100 M100 nearby Search Machine Name Hardware Serial No Address User Software MX1 00 TEST 1 Mx100 mx
27. ing Information about the Target MX100s MW100s Starting Data Monitoring Click the Start Monitoring button or choose Start Monitoring from the Monitoring menu Click Debt File Monitoring View Help System Channel Run Note e If GateMX MW is connected to the MX100 Backup mode will not be enabled when the communication is cut while monitoring data Even if the DS option is enabled the Dual Save feature will not operate e Ifthe initial communication with the target fails retry ten seconds after the communication failure is confirmed Additional time is required from the start of communication until the failure is recognized Displaying Run Status While Monitoring Data Click the Run tab You can also choose Run from the View menu Click System Channel L Client Host Computer name of the PC running the client software that is connected Maximum number of connections 16 E Communication Status 0 1 2 3 System No Unit No Channel Range Interval Num of Ch Status 00 00001 00004 10 msec d 00 00011 00044 100 msec 24 00 eee 200 msec 0 Gi o a Mat Acquisition Status Green Normal running Red Error stopped not able to connect or there is no corresponding channel to monitor data The number of channels assigned to the same monitor interval Monitor interval specified on the MX100 The maximum and minimum channel numbers of the channel range as
28. isdiction for judgment to be entered on the award and or for enforcement of the award 12 Miscellaneous 12 1 This Agreement supersedes all prior oral and written understandings representations and discussions between the parties concerning the subject matter hereof to the extent such understandings representations and discussions should be discrepant or inconsistent with this Agreement 12 2 If any part of this Agreement is found void or unenforceable it shall not affect the validity of the balance of the Agreement which shall remain valid and enforceable according to its terms and conditions The parties hereby agree to attempt to substitute for such invalid or unenforceable provision a valid or enforceable provision that achieves to the greatest extent possible the economic legal and commercial objectives of the invalid or unenforceable provision 12 3 Failure by either party to insist on performance of this Agreement or to exercise a right when entitled does not prevent such party from doing so at a later time either in relation to that default or any subsequent one End of document IM WX1 06E iii How to Use This Manual Structure of This Manual This user s manual consists of the following sections Chapter Title Description 1 Overview Gives an overview of the GateMK MW functions Describes the PC system requirements and system configuration that are required to use GateMX MW 2 Operating Procedure Describes the operating pro
29. leted 2 6 The Software Product may contain software which Yokogawa is granted a right to sublicense or distribute by third party suppliers including affiliates of Yokogawa Third Party Software If suppliers of the Third Party Software Supplier provide special terms and conditions for the Third Party Software which differ from this Agreement the special terms and conditions separately provided by Yokogawa shall prevail over this Agreement Some software may be licensed to you directly by Supplier 2 7 The Software Product may contain open source software OSS for which the special terms and conditions separately provided by Yokogawa shall take precedence over this Agreement 3 Restrictions on Application 3 1 Unless otherwise agreed in writing between you and Yokogawa the Software Product is not intended designed produced or licensed for use in relation to aircraft operation or control ship navigation or marine equipment control or ground facility or device for support of the aforesaid operation or control or for use in relation to rail facility nuclear related facility radiation related equipment or medical equipment or facility or under any other circumstances which may require high safety standards 3 2 If the Software Product is used for the abovementioned purposes neither Yokogawa nor Supplier assumes liability for any claim or damage arising from the said use and you shall indemnify and hold Yokogawa Supplier their affiliates
30. mn Click 215131 File Monitoring View Help System Channel Run Mx100 MVvV100 unit list IP Address Host ChNum System Hardware Machine Name a 10 0 232 102 5 x 1 192 168 110 101 Get Info he L H 2 Get Info 0 z D 7 2 Nat Infa n To a Note e If the MX100 MW100 from which you are attempting to retrieve information is already connected by another user or if the MX100 MW100 does not exist on the network the information cannot be retrieved The number of the channel is displayed as 0 and the system hardware and machine name do not appear As shown in the figure below you can select multiple numbers in the No column and click the button below the Info column to retrieve information of multiple registered units 1 Select IP Address Host Info ChNum System Hardware Machine Name a 192 166 10 100 Get Info 0 E e E B H e 192 166 10 101 Get Info r E e B v 192 168 110 102 Get Info E e BR e 192 166 10 103 Get Info ses Te J v Get Info 0 z z z HI Get Info D z Get Info 7 v x Get Info 0 Lv 7 v Le Get Info D z z HI Get Info 0 Lv 7 7 L Z ara ZEN EE Ee EE EN 2 Click e The information is retrieved again from the registered MX100 MW100 when data monitoring is started 2 To change the number of channels
31. nication status displayed in the Run tab Ready 20040727 14 28 21 Condition status Number of connected clients Connection with MX100 MW100 normal Connection with MX100 MW100 abnormal kel Reconnecting with MX100s MW100s only displayed during communication System numbers are assigned on the GateMX MW System Configuration screen as shown in the figure below Since four monitor intervals can be specified on each MX100 MW100 the system numbers are assigned in the range from O to 127 1 2 3 4 5 6 7 System No Monitor Hier pom xoma boom gone oom interval MX100 of Unit No 00 MX100 of Unit No 01 MX100 of Unit No 02 e Interval groups with the same monitor interval can be configured on the MX100 Standard Software See the MxX100 Standard Software User s Manual IM MX180 01E A single interval group is displayed as a single system on GateMX MW IM WX1 06E 2 7 e npe90o q Dugiodo H 2 4 Starting Stopping Data Monitoring Settings on the MX100 Standard Software Displayed on GateMK MW Interval Interval Interval System No Unit No Channel Range Num of Ch group 1 group 2 group 3 Co J w 1s 1s _ do j is e If a monitor interval longer than 1 minute is specified on the MX100 Standard Software the monitor interval on the MX100 is set to 1 minute and the monitor interval longer than 1 minute is achieved by decimating the data on the MX100 Standard Software Therefore even if a monitor inte
32. rom the Claim if the infringement is arising from a modification of the Software Product made by a person other than Yokogawa b combination of the Software Product with hardware or software not furnished by Yokogawa c design or instruction provided by or on behalf of you d not complying with Yokogawa s suggestion or e any other causes not attributable to Yokogawa 5 5 This section states the entire liability of Yokogawa and its suppliers and the sole remedy of you with respect to any claim of infringement of a third party s intellectual property rights Notwithstanding anything to the contrary stated herein with respect to the claims arising from or related to the Third Party Software or OSS the special terms and conditions separately provided for such Third Party Software or OSS shall prevail 6 Limitation of Liability 6 1 EXCEPT TO THE EXTENT THAT LIABILITY MAY NOT LAWFULLY BE EXCLUDED IN CONTRACT YOKOGAWA AND SUPPLIERS SHALL NOT BE LIABLE TO ANY PERSON OR LEGAL ENTITY FOR LOSS OR DAMAGE WHETHER DIRECT INDIRECT SPECIAL INCIDENTAL CONSEQUENTIAL OR EXEMPLARY DAMAGES OR OTHER SIMILAR DAMAGES OF ANY KIND INCLUDING WITHOUT LIMITATION DAMAGES FOR LOSS OF BUSINESS PROFITS BUSINESS INTERRUPTION LOSS OR DESTRUCTION OF DATA LOSS OF AVAILABILITY AND THE LIKE ARISING OUT OF THE USE OR INABILITY TO USE OF THE SOFTWARE PRODUCT OR ARISING OUT OF ITS GENERATED APPLICATIONS OR DATA EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES WHETHER BASED
33. rval longer than 1 minute is specified on the MX100 Standard Software the monitor interval is displayed as 1 minute on GateMK MW and the data is monitored at 1 minute intervals MX100 Settings on the MX100 Standard Software Displayed on GateMX MW System No Unit No Channel Range Interval Num of Ch Interval Interval Interval group 1 group 2 group 3 J 100 mss 1s 100 ms 1 hour U EEE MX100 e If the interval group of different monitor intervals are set on the MX100 Standard Software the MX100 sorts them by monitor intervals from fastest to slowest Consequently the GateMX MW also assigns system numbers in order from fastest to slowest monitor interval when retrieving the information on the System Configuration screen If the system is set or changed on the System Configuration screen the system numbers are assigned in the set order Settings on the MX100 Standard Software Displayed on GateMX MW menai merya ER System No Unit No Channel Range Interval Num of Ch nterva groupi group 2 group3 0 TE t00ms 1s 500 ms 100 ms 1 oo J sooms 2 Im Il ts LI MX100 Stopping Data Monitoring Click the Stop Monitoring button or choose Stop Monitoring from the Monitoring menu Click File Monitoring View Help li gt 2 8 IM WX1 06E 2 5 Connecting to GateMX MW from DAQLOGGER Remote Monitor or Add on Software While data is being monitored by GateMX MW DAQ
34. se Save when you have not saved to a specific file name before the same dialog box that opens as when you choose Save As opens Changing to the Saved Settings From the File menu choose Open Select and open the desired file in the dialog box that appears 2 10 IM WX1 06E 2 7 Showing Version Information Procedure Click the About button on the toolbar or choose About from the Help menu Display version information File Monitoring View Help al gt mr The About dialog box opens as shown below Ce Soon Version Copyright 2 2003 2008 Yokogawa Electric Corporation Software Japan This product is licensed to Company name License number IM WX1 06E 2 11 ainpsd0 dg Bu 1e edo H Chapter 3 3 1 Code E0002 E0211 E4800 IM WX1 06E Error Messages and Corrective Actions Error Messages and Corrective Actions This section describes the messages and their corrective actions when errors occur Description Action Insufficient memory Please exit Close other software programs and restart GateMX MW Or restart immediately Windows Cannot write to the file Check whether there is sufficient space on the hard disk whether writing is permitted and whether the file system is operating normally The maximum limit of Gate The number of Gate programs that you can run simultaneously is limited by programs running simultaneously the Gate software license that you have purchased Close a G
35. signed to the same monitor interval Number registered in the MX100 unit list under System Assigned system number 2 6 IM WX1 06E 2 4 Starting Stopping Data Monitoring Note e The color of the unit numbers under Communication Status indicates the following conditions Gray characters in dark gray There is no IP address or host name specified for the MX100 MW100 with that unit number specification is blank Or there is an IP address or host name specified but the number of channels and system is not specified HH Green Communication with the MX100 MW100 is normal and data is being monitored GRE Red There is an IP address or host name specified for the MX100 MW100 with that unit number but the connection failed Or communication was cut while monitoring data and now attempting to reconnect fa E Black There was an IP address or host name specified for the MX100 with the unit number and connection succeeded but there were no channels set to acquire data If the icon is displayed in red try the connection again If reconnection is successful the icon turns green and acquisition resumes When acquisition stops all characters turn gray characters in dark gray When acquisition resumes registered items blink The gray color of unregistered items remains unchanged characters in dark gray O81 El blinks does not change e The status of GateMX MW is displayed in the status bar You can check the commu
36. t multiple monitor intervals in the same system If the same monitor interval is set for the MW100 it is assigned to each system in order from smallest measurement group number Also if the number of same monitor intervals is greater than the actual number of measurement groups only the actual number of measurement groups is valid 2 To display channel information click the Channel tab You can also choose Channel from the View menu Click Highest two digit Registered unit number Lowest three digit Channel number 000 to 099 Math channel more than 100 HEZM XE 0sl File Monitoring View Help gt el gt Im System Channel Run No Channel filo Tag No Tag Comment System No 00001 00001 00002 00002 00003 00003 00004 00004 00005 00005 00006 00006 00007 00007 00008 00008 00009 00009 00010 00010 00011 00011 00012 00012 00013 00013 00014 00014 00015 00015 Unit No l l II El El kl El El ll El El Il Il IH El Ik IE O li IEl E Eu HI EJ El Bl EE E HI EI EJ El Hl cits 2006 03 8 16 44 56 Click the number to highlight the channel information of the corresponding unit Note e The channel information is displayed only for channels that are set to acquire data in the MX100 MW100 settings e If the number of channels set in step 2 exceeds the actual number of channels that exists in the MX100 MW100 the portion of nonexistent channels is left blank If
37. ued Please keep the license number in a safe place Trademarks e DAQWORX DAQLOGGER and DAQEXPLORER are registered trademarks or trademarks of Yokogawa Electric Corporation e Microsoft Windows and Windows Vista are registered trademarks or trademarks of Microsoft Corporation in the United States and or other countries e Adobe and Acrobat are registered trademarks or trademarks of Adobe Systems Incorporated e Company and product names that appear in this manual are registered trademarks or trademarks of their respective holders e The company and product names used in this manual are not accompanied by the registered trademark or trademark symbols and TM Revisions e 1st Edition December 2003 e 2nd Edition February 2005 e 3rd Edition March 2006 Cover title changed e 4th Edition June 2007 e 5th Edition March 2008 e 6th Edition January 2009 e 7th Edition January 2011 e 8th Edition October 2011 8th Edition October 2011 YK All Rights Reserved Copyright 2003 Yokogawa Electric Corporation IM WX1 06E i Software License Agreement IMPORTANT PLEASE READ CAREFULLY BEFORE INSTALLING OR USING THANK YOU VERY MUCH FOR SELECTING SOFTWARE OF YOKOGAWA ELECTRIC CORPORATION YOKOGAWA BY INSTALLING OR OTHERWISE USING THE SOFTWARE PRODUCT YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THIS AGREEMENT IF YOU DO NOT AGREE DO NOT INSTALL NOR USE THE SOFTWARE PRODUCT AND PROMPTLY RETURN IT TO THE PLACE OF PURCHASE
Download Pdf Manuals
Related Search