External USB Interface CD ReWriter Installation Guide
Contents
1. DIAMOND DATA A REGISTERED TRADEMARK OF MITSUBISHI ELECTRIC AUSTRALIA PTY LTD HOD gj UNIVERSAL SERIAL BUS External USB Interface CD ReWriter Installation Guide Follow the instructions given below to install your Diamond Data external CD RW drive with a USB interface Once the required device driver software is installed USB devices may be connected to or removed from the computer without having to turn it off or reboot Connecting the CD ReWriter to the Computer 1 Turn your computer on and allow the operating system to start 2 Connect the AC transformer from the CD RW drive to a power outlet as shown H Power outlet 3 Turn the drive s power switch on The drive s power indicator light should be lit Power indicator 4 Connect the CD RW drive to a free USB port on the computer or USB hub Windows Device Driver Installation This procedure must be carried out once before the drive can be used with any computer It does not need to be repeated each time that the drive is to be used 1 Windows will automatically detect the CD RW drive and start the Add New Hardware Wizard Please follow the instructions displayed on the computer s screen to complete the device driver installation 2 The device driver software is on the 3 5 1 44 MB floppy disk supplied with the CD RW drive labeled USB DEVICE DRIVER Select Specify a Locatio2. m Phone 02 9684 7777 Fax 02 9684 7208 When contacting technical support please supply information about your computer including the manufacturer model and operating system the model of the CD RW drive and the recording software that you are using Copyright 2001 Mitsubishi Electric Australia Pty Ltd 348 Victoria Rd Rydalmere NSW 2116 Australia 4 Part No 46 B1811 002 Printed in Malaysia
3. n when prompted to locate the driver files The location to specify here is different for various versions of windows Windows 2000 type a win2000 Windows ME type a winme Windows 98 type a win98 3 Install the CD authoring software provided with the drive For additional information on installing and using software and hardware please refer to the software s Instruction Manual as well as the User Manual included on the software s CD ROM Note If Windows Install New Hardware box does not appear after the CD RW drive is connected to the computer there may be a problem with the configuration of the computer s USB interface or device drivers To check whether there are any problems with the USB drivers open the Control Panel by clicking on Start Settings and Control Panel Double click the System icon and select the Device Manager Look for the Universal Serial Bus controllers item near the bottom of the Device list Make sure that no red or yellow marks are displayed next to any device These marks indicate that there is a problem with the device Technical Support New drivers and firmware may be posted to Mitsubishi Electric Australia s web site from time to time The site address is www mitsubishi electric com au Answers to many Frequently Asked Questions are also available from this site For further assistance contact Mitsubishi Electric Australia s technical support staff E mail support meaust meap co
Download Pdf Manuals
Related Search