TABLE TOP WATEr COOLEr
Contents
1. Keep proof of the original purchase date with this guide to establish the warranty period Keep a copy of the sales receipt Write down the model and serial numbers which can be found on a label located on the side of the water cooler Please write the information here Date of Purchase Model Number HWB2052 Color White Silver Black Serial Number WARNING BEFORE CONNECTING THE APPLIANCE TO THE POWER SOURCE LET IT STAND UPRIGHT FOR APPROXIMATELY 24 HOURS THIS WILL REDUCE THE POSSIBILITY OF A MALFUNCTION IN THE COOLING SYSTEM FROM MISHANDLING DURING DELIVERY 2 PARTS AND FEATURES No Name No Name 1_ Water Funnel 2 Hot and Cold Power Switches 3 Indicator Lights 8 Power Cord 4 Rating Label 9 Drain Cap 5 Cold Water Faucet Tap 3 IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of fire electrical shock or injury when using your appliance follow these basic precautions Read and understand all instructions before using the water cooler Your water cooler runs on 120 Volt AC 60 Hz current Do not plug this product to 220V current e Before operating the product remove it from its 120V AC packaging and check if it is in good condition 60Hz DONOT operate any product with a damaged cord or plug Using an extension cord is not recommended with this appliance Make sure the water cooler is plugge2. Honeywell TABLE TOP WATER COOLER NN ENFRIADOR DE AGUA DE MESA E OWNER S MANUAL Read and save these instructions aa before use rj i MANUAL DE V 0 n INSTRUCCIONES Lea y guarde estas instrucciones antes de usar el producto ee Modelo HWB2052W S B Series For customer service please contact 1 855 687 2223 Para servicio al consumidor favor contactar 1 855 687 2223 UL Listen XXXXXXX CONTENTS T Do dated dete 3 2 Parts and FedlUlGS acia 4 3 Important Safety Instructions seen 5 4 Function Buttons acosan 6 EMEN el BEES 7 6 Installation Guidelines nnn 7 1 Installing Your Water Cooler For The First Time 8 8 Instructions For Loading The Water Bottle 10 9 PA e 12 10 Technical Specification esses 12 11 Troubleshooting 13 1 BEFORE FIRST USE Read all instructions carefully before setting up and operating the unit Please keep this instruction manual for future reference This manual is designed to provide you with important information needed to operate and maintain your water dispenser If you don t understand something or you need more assistance please contact us Failure to follow these instructions may damage and or impair operation and void the warranty
3. ION Model No 400W Heating Capacity 5L h 2 90 C 1 32 G h z 194 F Cooling Capacity 2L h lt 10 C 0 53 lt 50 F Compressor Refrigerant Eco Friendly R134a 11 TROUBLESHOOTING GUIDE IF THE UNIT IS NOT WORKING PROPERLY PLEASE REFER TO THE TABLE BELOW TO SOLVE MOST COMMON PROBLEMS Issue Possible Cause Solution No water No water inside the tanks Make sure the tanks are filled with comes out Tanks or tubes inside the unit are water from the clogged Contact customer service faucets Levers not working properly No hot water Hot switch is OFF Turn ON the hot switch Check the The unit may have overheated temperature 45 minutes later Hot switch is damaged Turn OFF the hot switch and allow the unit to rest for 1 hour Turn ON the hot switch again make sure there is water inside the tank Contact customer service Cold switch is OFF Turn ON the cold switch Check the The unit may have overheated temperature 45 minutes later Cold switch is damaged Turn OFF the hot and cold switches and allow the unit to rest for 1 hour Turn ON both switches again make sure there is water inside the tank Contact customer service No cold water Water leaking Drip tray is full Empty the drip tray from the unit The water bottle was not properly Turn OFF the cold and hot water loaded switches and dry the unit on the Water leakage inside of the unit outside and its surro
4. ON Additionally it has two indicator lights for the hot and cold water respectively which will light up while the feature is working Once the water has reached the minimum temperature the indicator lights will turn OFF HOT POWER COLD 6 INSTALLATION GUIDELINES Remove the exterior and interior packing BEFORE CONNECTING THE UNIT TO THE POWER SOURCE let it stand upright for approximately 24 hours This will reduce the possibility of a malfunction in the cooling system from mishandling during delivery This unit is for indoor use only and must be installed in a cool ventilated area Place the unit on a level surface that is strong enough to support the dispenser Keep area around the unit free of dust and dirt Locate the unit away from direct sunlight and sources of heat stove heater radiator etc Direct sunlight may affect the unit over time and heat sources may increase electrical consumption Extreme cold ambient temperatures may also cause the appliance not to perform properly 9 9 UPRIGHT POSITION LEVEL SURFACE 6 INSTALLATION GUIDELINES Direct sunlight may also cause algae to grow inside your water bottle that may later cause product malfunction Donotlocate the unit in areas where the temperature may fall below freezing 32 F 0 C e Allow 6 inches of space between the unit and the wall to allow for proper air circulation to cool the compressor Please follow the instruction
5. OR LOADING THE WATER BOTTLE WARNING Only use 3 or 5 gallon water bottles on this water cooler WARNING Please make sure to turn OFF the unit when the hot and cold water tanks are empty Always have water inside the tanks before turning ON any switch Loading bottles with spill proof cap e This unit contains a funnel with a prong to avoid spills when using bottles with spill proof cap e Carefully lift the bottle approx 40 Ibs for the 5 gallon bottle Bend your knees to lift the bottle not your back Do not place hands over the opening of the bottle while placing it on the unit Please seek help if you are unable to lift the water bottle e Invert the 3 or 5 gallon water bottle over the unit and gently let the neck of the bottle slide into the funnel making sure the spill proof cap slides down into the prong e The prong will break the spill proof cap allowing the water from the bottle to go down into the funnel and into the main reservoir without any spills e Allow the water to fill all tanks of the unit for approximately one minute e Push in on all water levers to make sure water flows from all faucets e Plug the unit back into the electrical outlet e Turn ON the hot water switch wait a couple of minutes and turn ON the cold water switch Allow the unit to reach the minimum cold and hot water temperatures This will take approximately 45 minutes and the indicator lights will turn OFF e Test the water temperatures b
6. d into an exclusive properly installed Ground fault Circuit interrupter wall outlet Do not cut or remove the third ground prong from the power cord under any circumstances Any questions concerning X power and or grounding should be directed toward IN a certified electrician Improper use of the grounded plug can result in the risk of electrical shock If the 1 power cord is damaged have it replaced by an authorized service center DO NOT run power cord under carpeting or cover it with rugs or runners Keep the cord away from areas where it may be tripped over Always unplug the appliance from the power source before cleaning servicing or relocating the unit sure to turn OFF the unit when the hot and cold water tanks are empty Always have water inside the tanks before turning ON any switch Overlook of this warning may cause permanent damage to the unit from overheating Remove the power cord from the electrical receptacle by grasping and pulling on the power cord plug end only never pull the cord NOT attempt to repair or adjust any electrical or mechanical functions of the unit as this may void the warranty 00 NOT let children play with this appliance packaging or plastic bags f the unit is damaged or it malfunctions do not continue to operate it Refer to the troubleshooting section and or please seek professional advice Never locate the product where it may fall into a ba
7. follows 7 INSTALLING YOUR WATER COOLER FOR THE FIRST TIME Ensure the unit is unplugged 2 Fill water reservoir with tap water full to capacity in Allow the water to settle into the hot and cold water tanks for 5 minutes Fig 1 3 Push each water lever hot and cold temperature to ensure water is running through the unit Fig 2 4 Plugthe dispenser unit into the electrical outlet Please review the IMPORTANT SAFETY INSTRUCTIONS and Fig 1 INSTALLATION GUIDELINES before doing so 5 Turn ON the hot water switch wait a couple of minutes and turn ON the cold water switch Allow the unit to reach the minimum cold and hot water temperatures This will take approximately 45 minutes and the indicator lights will turn OFF Fig 3 6 Testthe water temperatures by pushing once again on the water levers 7 Turn OFF both hot and cold water switches and unplug the unit from the electrical outlet 8 Proceed to drain the water from the faucets one at a time by pushing on the hot and cold levers until no more water remains 9 Turn counterclockwise to open the drain cap and drain the water from the tanks Do not tilt the unit to drain the water Fig 4 10 Close the drain cap by turning it clockwise 11 Your unit is ready to be used Please proceed with the water bottle loading instructions Fig 2 Fig 3 8 INSTRUCTIONS F
8. s to load the water bottle before plugging the unit to the power source sure the hot and cold water power switches are in the OFF position before plugging the unit to the power source Do not use an adapter plug with this unit Do not use an extension cord with this unit If the power cord is too short have a qualified electrician or service technician install an outlet near the appliance e Plug the unit into an exclusive properly installed grounded wall outlet Do not cut or remove the third ground prong from the power cord under any circumstances Any questions concerning power and or grounding should be directed toward a certified electrician ATTENTION If you do not plan to use the water heating function for more than three days we recommend that you turn off the hot water power switch 7 INSTALLING YOUR WATER COOLER FOR THE FIRST TIME IMPORTANT STEPS BEFORE USING YOUR WATER COOLER BEFORE CONNECTING THE APPLIANCE TO THE POWER SOURCE tet it stand upright for approximately 24 hours This will reduce the possibility of a malfunction in the cooling system from mishandling during delivery WARNING Please make sure to turn OFF the unit when the hot and cold water tanks are empty Always have water inside the tanks before turning ON any switch The water cooler is pre cleaned at the factory but the reservoir hot and cold water tanks and water lines must be flushed with fresh water before use as
9. spect to this product This product is manufactured by Mitrana Group Inc
10. ter inside the tanks before turning ON any switch e Turn OFF the hot and cold water switches e Unload the empty bottle from the water cooler e Proceed to load the new bottle following the INSTRUCTIONS FOR LOADING THE WATER BOTTLE 9 MAINTENANCE CAUTION e Before cleaning the unit switch the hot and cold switches to the OFF position and remove the plug from the power socket e Never use corrosive elements or any chemicals to clean this product e When the product is not in use store the unit in a dry place out of direct sunlight Cleaning the outside of the water cooler e To clean the outside of the unit use a soft cloth with warm water Avoid abrasive cleaners or hard materials to prevent damage and or scratches to the unit e Clean the drip tray regularly to avoid water buildup To remove the drip tray simply lift it up and outward e Toclean the back of the machine clean with a duster such as a micro fiber cloth and or vacuum the coils using the duster attachment of the vacuum please refer to your vacuum cleaner owner s manual Storing your Water Cooler Please follow these instructions to store the water cooler when it will not be used for an extended period of time e Turn OFF the hot and cold water switches Unplug the power cord from the power supply e Drain the water through the faucets and draining cap e The unit must be stored in the upright position and protected from dust 10 TECHNICAL SPECIFICAT
11. thtub or other water container DO NOT use in bathrooms or outdoors 3 IMPORTANT SAFETY INSTRUCTIONS This appliance is not intended for use by persons including children or elderly with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Never clean parts with flammable fluids The fumes can create a fire hazard or explosion not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other water dispenser The fumes can create a fire hazard or explosion e Keep this instructions handy for future reference 4 FUNCTION BUTTONS POWER Press on the hot or cold switches on the back of the unit to turn on the hot and cold functions DO NOT turn on both switches at the same time Please refer to INSTALLING YOUR WATER COOLER FOR THE FIRST TIME section WATER TAPS Push in the hot cold water levers with a cup or container to dispense the desire water temperature To use the hot lever press the middle red button safety lock and simultaneously push in the lever DRAIN CAP Turn counterclockwise to remove the drain cap to drain OPEN ABRIR the water from the tanks Turn clockwise to close the drain cap CLOSE CERRAR 5 INDICATOR LIGHTS This unit features a power light to indicate the water cooler is
12. undings If the problem continues contact customer service Odor in the New machine Please proceed with First Time water The unit has not been used for a Instructions on page 8 long time There may be an algae issue Low Electric The unit is not properly grounded Please call a professional electrician shocks The power cord is damaged to assist you with any electrical problem Ifthe problem continues contact customer service For any issue not shown on the table please contact customer service 1 855 687 2223 Do not attempt to disassemble the unit yourself The manufacturer will not undertake any responsibility from damages or incidents resulting from it This action will void the manufacturer s warranty 13 Mitrana Group Inc Av Interamericana y Roberto Eisemann Coronado Mall P 2 Ofc 35 Panam For general inquires about Mitrana Group Inc or Honeywell Water Coolers please contact the toll free number 1 855 HWHELP1 1 855 494 3571 International rates may apply Or visit www honeywellwatercoolers com Imported and Distributed by SCA Imports LLC 18851 NE 29th Ave Suite 706 Aventura Fl 33180 Tel 1 855 687 2223 www iluminumgroup com 2013 Mitrana Group Inc All rights reserved IM01 HWB2052W S B 2013 03 The Honeywell Trademark is used under license from Honeywell International Inc Honeywell International Inc makes no representations or warranties with re
13. y pushing once again on the water levers e Your water cooler is now ready for use 10 fei Fn 8 INSTRUCTIONS FOR LOADING THE WATER BOTTLE Loading bottles without spill proof cap e Remove the cap from the 3 or 5 gallon water bottle S and use a clean cloth to wipe off the neck of the T bottle e Carefully lift the bottle approx 40 Ibs for the 5 gallon bottle Bend your knees to lift the bottle not your back Do not place hands over the opening of the bottle while placing it on the unit Please seek help if you are unable to lift the water bottle e Invert the 3 or 5 gallon water bottle over the unit and gently let the neck of the bottle slide into the funnel gt making sure the prong goes into the neck of the bottle e Allow the water to fill all tanks inside the unit for EA approximately one minute e Push in on all water levers to make sure water flows from all faucets e Plug the unit back into the electrical outlet e Turn ON the hot water switch wait a couple of minutes and turn ON the cold water switch Allow the unit to reach the minimum cold and hot water temperatures A This will take approximately 45 minutes and the indicator lights will turn OFF e Test the water temperatures by pushing once again on the water levers IC e Your water cooler is now ready for use Steps To Replace Water Bottles WARNING Please make sure to turn OFF the unit when the hot and cold water tanks are empty Always have wa
Download Pdf Manuals
Related Search