Removal of NG900 Instrument Cluster
Contents
1. iary instrument panel D unit by means of withdrawal screws M3 and unplug the connector 15 Remove the light switch and the headlamp beam control switch 16 Remove the instrument panel retaining screws 17 Loosen the top of the instrument panel Make sure that the clips on the short sides release and go clear Lift out the panel 18 Unplug all connectors 16 On the drawing below mark the location of each of the instrument panel screws with an X and the locations of the clips with a x Total of instrument panel screws 9 Total of instrument panel clips 6 17 Did one of the air outlet mechanisms self destruct when you yanked the instrument panel out Yes no If so how many of the pieces did you recover2. instrument panel Se 1a To remove 6 Rock the steering wheel loose withdraw the VARNING connectors and unscrew the steering column Exercise the utmost care when carrying out nut any work involving the airbag module Read the safety rules in Service Manual 7 Undo the screws securing the upper and lower sections of the cowl and remove same Airbag 8 Press in the two clips on each mounting pull the 1 Disconnect the cable from the negative battery steering column controls straight out and unplug terminal the connectors Withdraw the steering wheel to the full extent of its adjustment 3 Remove the airbag module To do this remove the retaining screws on the underside of the steering wheel and unplug the connector d Unplug the horn connector 5 Turn the steering wheel so hat the front wheels point straight ahead Slacken the steering col umn nut but do not unscrew it completely Instrument panel contd 8 Remove the diagnostic socket It is located un derneath the dashboard on the driver s side 10 Remove the screws securing the tower dash board section and the expanding rivets in the front edge To remove the expanding rivets press the centre pin further into the rivet 11 Release the radio by means of the forks and withdraw it Unplug the aerial and connectors 12 Remove the storage compartment if fitted 13 Remove the radio contact box using a screw driver 14 Remove the auxil
Download Pdf Manuals
Related Search