Instruction Sheet For Kit Nos. 1746, 1747, and 1748
Contents
1. Test ride the 2 ADJUSTING PLATE FLHT FXR 1748 2 motorcycle before going out into traffic 1 AXLE WASHER FLHT FXR 1748 1 1 INSTRUCTION SHEET 1746 IS 1 Support motorcycle with JIMS No 904 Center Jack Keep bike level with rear tire lifted just slightly off the ground 2 Remove nuts or Allen screws from the axle adjuster plates Remove stock axle adjuster plates and replace with JIMS axle adjuster plates Re install the original fasteners and snug up for now 3 Remove cotter pin or cotter clip depending which came stock on your bike Remove the axle nut and flat washer Discard the original flat washer Leave the axle in place 4 Install JIMS axle nut washer onto axle and align the slot of the JIMS washer with the slot in the swingarm This replaces the OEM flat washer Install the stock axle nut just snug for now 5 Follow H D service manual for the year and model of your bike to verify and or adjust rear drive belt tension and rear wheel alignment 6 Torque rear axle nut to the proper torque specification per service manual 7 Re install cotter clip or new cotter pin 8 Spin the wheel to verify belt runs true in the pulley Test ride and re check the axle adjuster fasteners for prop er tension and adjustment CAUTION WEAR SAFETY GLASSES OVER YOUR EYES SEE JIMS CATALOG FOR HUNDREDS OF TOP QUALITY PROFESSIONAL TOOLS THE LAST TOOLS YOU WILL EVER NEED TO BUY Petfotmance Faia fot tlatley Vavitdion Nlorowcycles 555 DAWSON DRI2. No 1746 I1S REV B 3 15 A Division of Thiessen Products Inc INSTRUCTION SHEET FOR KIT Nos 1746 1747 AND 1748 JIMS AXLE LOCKDOWN KITS ARE DESIGNED TO UPGRADE THE STOCK ff HARDWARE ON THE FOLLOWING h Part No 1746 Fits 1991 2005 Dyna P Part No 1747 Fits 1979 2004 XL 1973 1986 FL FX and pr 1984 85 FXST Part No 1748 Fits 1980 2001 FLHT and 1982 2000 FXR p Y i jl hi RECOMMENDED TOOLS AND SUPPLIES e 15 16 socket and ratchet wrench Torque wrench reading ft Ibs 1 2 and 9 16 socket or wrench except Dyna 5 16 Allen wrench Dyna Cotter Pin as needed H D Service manual for year and model motorcycle you are working on e JIMS No 904 Center Jack e JIMS No 928 Rear Wheel Alignment Tool e JIMS No 923 Belt Tension Gauge Note Read this entire instruction sheet before starting the job If you are not sure of the processes or methods take the vehicle to an PARTS AVAILABLE SEPARATELY authorized repair shop Follow safety procedures such as wearing eye pro 21 DESCRIPTION OURO l l l 2 ADJUSTING PLATE DYNA 1746 2 tection or a full face shield Tie down the motorcycle so that it cannot and a r ae TA will not fall over Use the proper tools for the job Always follow the serv ADJUSTING PLATE FX FL XL ae ice manual for the year and model motorcycle you are working on JIMS AXLE WASHER FX FL XL 1747 1 is not responsible for your safety or the quality of your work
3. VE CAMARILLO CA 93012 PHONE 805 482 6913 FAX 805 482 9224 VISIT US ON THE WEB AT WWW JIMSUSA COM
Download Pdf Manuals
Related Search