to manual - Cooking Appliances Australia
Contents
1. When wiring the plug ensure that all strands of wire are securely retained in each terminal Do not forget to tighten the mains lead clamp on the plug Ifyou are in doubt consult a qualified electrician BLUE NEUTRAL BROWN LIVE GREEN YELLOW STRIPES EARTH 9of 13 AD gh rey L Scholtes DESCRIPTION OF THE APPLIANCE OVERALL VIEW PMG42 shown Support Grid for COOKWARE GAS BURNERS Control Knobs for GAS BURNERS SAFETY DEVICES Ignition for GAS BURNERS e GAS BURNERS differ in size and power Use the diameter of the cookware to choose the most appropriate burner to cook with e CONTROL KNOBS for the gas burners adjust the power and size of the flame e IGNITION for the gas burner enables a specific burner to be lit automatically e SAFETY DEVICE stops the flow of gas if the flame is accidentally extinguished T Service Manual UK English 10 of 13 DISMANTLING PROCEDURE WARNING i A gas tightness test must be carried out both before and after completion of any work involving installation disconnection removal alteration and replacement or maintenance of any gas appliance fitting etc ii Before continuing ensure that the appliance is disconnected from the electrical supply and before servicing any gas carrying component disconnect the gas supply to the appliance iii Carry out insulation resistance Earth continuity and functional tests on the appliance after service2. 10 1 3 298 293 110 390 Nominal 28 30 37 20 Supply pressure Minimum 20 25 17 Maximum 35 45 25 At 15 C and 1013 mbar dry gas Propane P C S 50 37 MJ Kg Butane P C S 49 47 MJ Kg Natural P C S 37 78 MJ Kg The hob can only be installed above built in ovens with a cooling fan ventilation system PMG 41 DCDR 4 of 13 za Cholt s DIRECTIVES This model conforms with the following European Economic Community directives 2006 95 EEC dated 12 12 06 Low Voltage and subsequent amendmenis 2004 108 EEC dated 15 12 04 Electromagnetic Compatibility and subsequent amendments 93 68 EEC dated 22 07 93 and subsequent amendments 2009 142 EEC dated 30 11 09 Gas and subsequent amendments 2002 96 EC and subsequent amendments DISPOSAL To minimise the risk of injury to children please dispose of your product carefully and safely Remove all doors and lids Remove the mains cable where fitted by cutting off flush with the appliance and always ensure that no plug is left in a condition where it could be connected to the electricity supply To help the environment Local Authority instructions should be followed for the disposal of the product Disposal of Old Electrical Appliances A The European Directive 2002 96 EC on Waste Electrical and Electronic Equipment WEEE requires that old household electrical appliances must not be disposed of in the normal unso
3. iv Personal safety precautions must be taken to protect against accidents caused by sharp edges on metal and plastic parts 1 TO REMOVE THE HOB TOP a Disconnect the hob from the power supply and the gas supply b Remove the pan support burner cap s burner ring s control knob s springs and shrouds c Remove the 4 screws 2 per burner which hold the burners to the hob top d Remove the 2 screws that secure the 2 control taps to the hob top 1 screw per tap e Lift the hob top clear f Reassemble in reverse order 2 TO ACCESS THE CONTROLS a Disconnect the hob from the power supply b Remove the pan support burner cap s and burner rings s c Remove the 6 screws on the bottom cover to allow access to the controls 3 TO REMOVE THE SPARK GENERATOR a Remove the hob top as in 1 b Remove the Live Neutral and Earth connections from the spark generator noting their original positions c Remove the 2 electrode leads from the spark generator noting their original positions d Remove the 2 screws holding the spark generator to the hob base panel One of the screws supports the Earth pin e Reassemble in reverse order 4 TO REMOVE THE BURNER BASE BASES a Remove hob top as in 1 b Undo the hexagonal headed nuts holding the bundy tubes onto the burner bases using a 15 mm spanner c Remove the 2 screws from under the base holding the burner to the base panel Remove the plate held by 4 screws and remo
4. model PMG41 is Part Number CO0090735 and for model PMG42 is part number C00089138 GAS SAFETY INSTALLATION amp USE REGULATIONS It is the law that all gas appliances are installed by competent persons in accordance with the current edition of the above regulations It is in your interest and that of safety to ensure compliance with the law In the UK Gas Safe CORGI in Northern Ireland registered installers work to safe standards of practice The hob must also be installed in accordance with BS 6172 2004 Failure to install the hob correctly could invalidate the warranty liability claims and could lead to prosecution LOCATION The hob may be located in a kitchen kitchen diner or a bed sitting room but not in a room containing a bath or shower The hob must not be installed in a bed sitting room of less than 20m When adjusted for use on Butane G30 or Propane G31 this model must not be installed in a room or internal space below ground level e g in a basement PROVISION FOR VENTILATION The room containing the hob should have an air supply in accordance with BS 5440 Part 2 2009 The room must have an opening window or equivalent some rooms may also require a permanent vent If the room has a volume between 5 m and 10 m it will require an air vent of 50 cm effective area unless it has a door which opens directly to outside If the room has a volume of less than 5 m3 it will require an air vent of 100 cm effect
5. 5413143 Issue 1 Oct 2010 Scholtes 38 cm GAS HOBS Models Comm Covered Code Single Ring PMG41DCDRSF 57506 2 Ring PMG42SF 57507 Service Information Scholtes UK 2010 Reg Office Peterborough PE2 9JB Registered in London 106725 sinp pasi SAFETY NOTES 8 GENERAL SERVICING ADVICE 1 All Gas Appliances MUST by law be installed by a competent person Only use a Gas Safe Corgi in Northern Ireland Registered Engineer Service or repairs should always be carried out by Scholtes UK Service personnel 2 ALWAYS ISOLATE THE APPLIANCE FROM THE GAS AND WHERE NECESSARY ELECTRICAL SUPPLIES BEFORE COMMENCING ANY SERVICE OR REPAIR WORK 3 Personal safety precautions MUST be taken by engineers to protect against accidents caused by sharp edges on metal or plastic parts 4 This Publication is intended for qualified service engineers and all reasonable care has been taken to ensure that the information contained in the service instructions is correct at the time of printing Continued development of products means that specifications and parts are subject to modification and the information given may not entirely correspond with your appliance 5 Genuine Scholt s UK spares should always be used when repairing Scholt s UK products For UK customers the fitting of non genuine spares could affect your rights under the product liability section of the Consumer Protection Act 1988 IF YOU SUSPECT A GAS ESCA
6. F is a single Double Crown Wok burner gas hob model PMG42SF is a double burner gas hob with one Triple Crown burner Both models have automatic ignition cast iron pan supports and FSD fitted on each burner Model PMG41DCDRSF PMG42SF TECHNICAL DATA GENERAL COUNTRY OF ORIGIN OVERALL DIMENSIONS Height Width Depth front to back GAS SPECIFICATIONS Gas Connection Supply Pressure Pressure Test Point Gas Rate Adjustment Aeration Adjustment Comm Code Colour 57506 Stainless Steel 57507 Stainless Steel LPG Conversion Kits are available C00090735 model PMG41 C00089138 model PMG42 Italy 54 mm PMG41 47 mm PMG42 380 mm 510 mm Rp 1 2 1 2 BSP Male located on the left hand side of the hob when viewed from the rear Natural Gas Models G20 20 mbar Propane G31 at 37 mbar Butane G30 at 28 30 mbar Burner Injector None None ELECTRICAL SPECIFICATIONS Electrical Connection Flexible cord fitted 1 5 m 230 240V AC 50HZ supply with only a 3 amp fuse 30f 13 BURNER INPUT RATES 8 INJECTOR SIZES Table 1 Liquid gas Natural gas Diameter Thermal power By pass Injector Flow Injector Flow mm kW H s 1 100 1 100 g h 1 100 l h BURNER Nomin Reduc mm mm G30 G31 mm G20 D Triple Ring 130 3 25 1 3 57 91 236 232 124 309 A Auxiliary 55 1 00 0 4 30 50 73 71 71 95 Double flame DC DR internal 30 0 90 0 4 64 70 86 Double Flame DC DR external 130 4
7. PE CARRY OUT THE FOLLOWING DO turn off the gas supply immediately at the meter DO extinguish all sources of ignition DO open doors and windows to ventilate the room s DO ensure access can be made to the premises Where the operation of entry phones or electric security doors are evident these MUST NOT BE USED Access will have to be arranged by another method 5 If you cannot IMMEDIATELY attend to the gas escape report the escape to the gas supplier Their telephone number can be found in the local telephone directory DO NOT smoke DO NOT turn on or off electrical light or power switches POND NO IF IN DOUBT EVACUATE THE PREMISES AND IF NECESSARY ADJACENT PROPERTIES INDEX VANN AUEN ON e a ie E E E E E E EA 3 Technical DACA 5 w k we a t kwe kwe kaa tr kok AA ao kan ke PA n ER BARE RO RES SAAE 3 5 DISPOSA we kwe kk ae alman tak ee eben akte a oak oi es ed eee eee eee e dees ke 5 Installation Instructions 4 kise kone kon kn ee wee ee eee n n A A A n n es 6 9 Description of the Appliance ii ee enkoni a kn nn ee e kak dni kak kte 10 Dismantling Procedure vl ll ll kn n kn n n n n w n n n n n non n onn n na n nn nn nn nn n 11 12 Wiring Diagram 2ccccctececceececeieeteetertanteetersee seu Da e a e ane 13 2 of 13 sinp pasi INTRODUCTION OF SCHOLT S 38cm GAS HOBS MODELS PMG41DCDRSF 8 PMG42SF The above 38 cm Domino Gas Hobs were introduced to the Scholt s range during October 2010 Model PMG41DCDRS
8. ake sure that the seal adheres properly to the bottom part of the frame of the hob The seal must fit properly around the entire hob frame and especially along the corners in order to create a seal between the work top and the hob itself so as to prevent spills or splashes from leaking into the cabinet below The hob must be fixed into the work top using the fixing clamps as shown in Fig 4 below It is essential to install the hob on a totally flat surface Any damage caused by incorrect fitting may alter the characteristics or impair performance Insert the hob into the hole pressing firmly around the frame to make it adhere to the counter top Connect the hob to the gas supply and check for gas tightness Fig 4 8 of 13 INSTALLATION ELECTRICAL REQUIREMENTS WARNING REFER TO THE RATING PLATE FOR VOLTAGE AND CHECK THAT THE APPLIANCE VOLTAGE CORRESPONDS WITH THE SUPPLY VOLTAGE THIS APPLIANCE MUST BE EARTHED CONNECT TO A 230 240V 50Hz SUPPLY ONLY When connected to a B S 1363 fused plug a 3 amp fuse must be fitted IMPORTANT The wires in the mains lead fitted to this appliance may not correspond with the coloured marking identifying the terminals in the plug if this is the case proceed as follows The wire which is coloured BLUE must be connected to the terminal which is marked with the N or coloured BLACK The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED
9. inal block cover plate from the underside of the base Remove the cover Unscrew the Blue microswitch lead from the mains terminal block Remove the complete double microswitch assembly from the appliance Reassemble in reverse order NOTES w On reassembly all gas joints must be checked for leakage A new seal is to be used each time the control tap is removed from the gas rail TO REMOVE THE BURNER INJECTOR S Remove the pan support burner cap s and burner ring s The injector s can be removed by using a 7 mm box spanner 12 of 13 2 Scholt s WIRING DIAGRAM an Q o Spark Generator LI IJ 66 n fe Transformer f wa i T Mi an Tf y Icroswitc 15 Tp 66 66 i N L 59 Brown Terminal Block 66 Light Blue 15 Yellow Green 5413143wd pdf 230V 50Hz PMG41 PMG42 Service Manual UK English 13 of 13
10. ive area If there are other fuel burning appliances in the same room BS5440 Part 2 2009 should be consulted to determine air vent requirements 6 of 13 2 5 Scholt s SITING THE HOB All Scholt s hobs are suitable for installation over any Scholt s Built In Ovens The hob should be checked to ensure that the voltage corresponds with the voltage supply this is stated on the rating plate which is situated on the base panel These hobs are designed to fit into a worktop and base unit s with a cut out as shown in Fig 1 Fig 1 PMG42SF PMG41DCDRSF _ E ay English Service Manual UK 7 of 13 3 Scholt s Any obstruction such as supports or side panels must be removed to allow 15 mm minimum depth below the base of the gas hob Any overhead surface of combustible material must not be closer than 650 mm See Fig 2 and Fig 3 It is recommended that the hob be installed at a distance of at least 55 mm from the rear wall or other vertical surfaces to ensure that the air circulated properly over the cooking area and to avoid overheating the surrounding surfaces See Fig 3 If a cooker hood is to be installed refer to the manufacturers instructions regarding fixing heights FITTING THE HOB Unpack the hob from the carton Remove the bag containing the sealing tape fixing brackets and screws M
11. rted municipal waste stream Old appliances must be collected separately in order to optimise the recovery and recycling of the materials they contain and reduce the impact on human health and the environment The crossed out wheeled bin symbol on the product reminds you of your obligation that when you dispose of the appliance it must be separately collected Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance 5 of 13 sinp pasi INSTALLATION INSTRUCTIONS Prior to installation ensure that the local distributions nature of the gas and gas pressure and the adjustment conditions are compatible The adjustment conditions for this appliance are stated on the data badge which is fitted on the underside of the base panel The appliance is not designed to be connected to a combustion products evacuation device It must be installed and connected in accordance with current installation regulations In particular attention should be given to the relevant requirements regarding ventilation The models in this manual are set to burn NATURAL GAS G20 at 20 mbar It can be converted for use on Butane G30 at 28 30 mbar and Propane G31 at 37 mbar with the use of the conversion kit The appliance is supplied with an LPG kit which includes the injectors together with an LPG label The customer is advised to keep the kit in a safe place The Conversion Kit for
12. ve the burner d The small burner has no securing plate PMG42 Reassemble in reverse order 11 of 13 air Scholt s pasi oupa 2 Qo 7D ao 9 FP N D Te k l m THERMOCOUPLES Remove the hob top as in 1 Undo the 15 mm union nut Remove the 2 screws in the burner base When loose this will allow access to the 8 mm nut holding the thermocouple plate Reassemble in reverse order TO REMOVE THE HOB ELECTRODES amp LEADS Remove the hob top as in 1 Unclip and remove the retaining clip that holds the electrode and lead assembly to the burner base Remove the electrode and lead assembly Reassemble in reverse order TO REMOVE THE CONTROL TAP amp MICROSWITCH ASSEMBLIES Remove the hob top as in 1 Undo the hexagonal headed nuts securing the bundy tubes to both control taps using a 15 mm spanner Remove the screw from under the base holding the gas rail assembly Lift clear the gas rail assembly complete with control taps noting that the Blue leads and microswitches are still connected Remove the 2 screws securing the brackets on the gas rail to the control taps Remove the control tap assemblies from the gas rail Unclip and remove the retaining ring C clip from the spindle of the control tap Remove the washer Lift the microswitch assemblies clear noting the position of all the washers Disconnect one Blue lead from the spark generator Remove the 2 screws holding the mains term
Download Pdf Manuals
Related Search