ALPHARD SR / SA / S - Wald International
Contents
1. MORE THAN 2 TECHNICIANS ARE NECESSARY IN THIS WORK DURING ALL THE INSTALLATION PROCESS PLEASE BE CAREFUL NOT TO DAMAGE THE BODY X DEGREASE ALL THE INSTALLATION POSITIONS AND REMOVE THE BODY PROTECTION COATING BEFORE THE INSTALLATION WALD INTERNATIONAL WALD INTERNATIONAL ADD 10 13 KYOGUCHI CHO TAKATSUKI OSAKA JAPAN ZIP 569 0072 TEL 81 72 673 3000 FAX 81 72 673 3003 2015 092. 0 FAX 81 72 673 3003 Sini KOINA INSTALLATION MANUAL ALPHARD SR SA S csosw 2015y inhi AVAA LCS Sportliche Autoausrustung WALD International THANK YOU FOR PURCHASING THIS IS THE INSTALLATION MANUAL OF WALD GRILLE COVER FOR TOYOTA 30 ALPHARD SR SA S PLEASE READ THIS MANUAL CAREFULLY BEFORE THE INSTALLATION X NO RETURNS CAN BE ACCEPTED BECAUSE OF IMPROPER INSTALLATION OR PAINTING ii i SO o O PARTS X CHECK THE FITMENT AND ADJUST ALL THE DETAILS BEFORE PAINTING i Please purchase double sided tape i GRILLE COVER GRILLE COVER 1 E We assume no responsibility for any damage resulting from improper installation painting primer and caulking glue at BOLTS M6 x 20 To Hold License Plate 1 SET modification and any cut wound in unsealing auto accessory shop or hardware store ATTENTION E Contact the car dealer when you have any question in removing OEM parts E During all the installation process use parking brake and stop the engine completely i Completely degrease and paint primer on all E The product is made of FRP Handle with care Do not give the excessive force it m installation positions t enhance Te Seay A E EAE AA EA ETEA EE E EE EEE EEE EEEE EEEE Gradually fix the bolts and nuts by checking the fitment and balance of the installation i of double sided tape E Check the fitment and adjust all the details of the fitment steady and proper Use dryer to warm double sided tape to enh
3. ALPHARD sr sa s AGH30W 35W GGH30W 35W AYH30W 2015y INSTALLATION MANUAL WA L ES Sportliche Autoausr stung WALD International WALO SPORTS LINE THANK YOU FOR PURCHASING THIS IS THE INSTALLATION MANUAL OF WALD FRONT SPOILER FOR TOYOTA 30 ALPHARD SR SA S PLEASE READ THIS MANUAL CAREFULLY BEFORE THE INSTALLATION X NO RETURNS CAN BE ACCEPTED BECAUSE OF IMPROPER INSTALLATION OR PAINTING X CHECK THE FITMENT AND ADJUST ALL THE DETAILS BEFORE PAINTING E We assume no responsibility for any damage resulting from improper installation painting modification and any cut wound in unsealing ATTENTION E Contact the car dealer when you have any question in removing OEM parts E During all the installation process use parking brake and stop the engine completely E Use rasps or sandpapers to fit the products to the body if there is an individual difference E The product is made of FRP Handle with care Do not give the excessive force Gradually fix the bolts and nuts by checking the fitment and balance of the installation E Check the fitment and adjust all the details of the fitment steady and proper Please check the fitment and all the details regularly fix the bolts and nuts as necessary E The instruction of painting is just our recommendation please paint it as you like X PLEASE BE AWARE OF E Reduced road clearance may cause inconvenience in using parking curbs and garage jack E FRP ABS and PPE products are sli
4. IDE OF WALD SIDE STEPS it m ae y WALD Sie STEPS j t Use caulking glue to fix OEM inner panels to the doors Do the same work on the slide doors to fix OEM inner panels XOnly the time OEM inner panels are unstable use tapping screws to connect with WALD Side Steps WALD INTERNATIONAL WALD INTERNATIONAL ADD 10 13 KYOGUCHI CHO TAKATSUKI OSAKA JAPAN ZIP 569 0072 TEL 81 72 673 3000 FAX 81 72 673 3003 2015 09 KOINA INSTALLATION MANUAL ALPHARD SR SA S csosw 2015y S AVAA L ea Sportliche Autoausr stung WALD International THANK YOU FOR PURCHASING THIS IS THE INSTALLATION MANUAL OF WALD REAR SKIRT FOR TOYOTA 30 ALPHARD SR SA S PLEASE READ THIS MANUAL CAREFULLY BEFORE THE INSTALLATION X NO RETURNS CAN BE ACCEPTED BECAUSE OF IMPROPER INSTALLATION OR PAINTING it PARTS QUANTITIES CHECK THE FITMENT AND ADJUST ALL THE DETAILS BEFORE PAINTING Please purchase double sided tape REAR SKIRT REAR SKIRT 1 E We assume no responsibility for any damage resulting from improper installation painting primer and caulking glue at TAPPING SCREWS M4 X 16 4 modification and any cut wound in unsealing ATTENTION E Contact the car dealer when you have any question in removing OEM parts g E During all the installation process use parking brake and stop the engine completely A E Use rasps or sandpapers to fit the products to the body if there is an individual difference auto accessory shop or hard
5. N THIS WORK DURING ALL THE INSTALLATION PROCESS PLEASE BE CAREFUL NOT TO DAMAGE THE BODY X ADJUST ALL THE DETAILS OF OUR PRODUCTS TO FIT ON A CAR PERFECTLY o WALD INTERNATIONAL WALD INTERNATIONAL ADD 10 13 KYOGUCHI CHO TAKATSUKI OSAKA JAPAN ZIP 569 0072 TEL 81 72 673 3000 FAX 81 72 673 3003 Sieh tees INSTALLATION MANUAL ALPHARD srisais SES cos Bae WVA LS Sportliche Autoausr stung WALD International THANK YOU FOR PURCHASING THIS IS THE INSTALLATION MANUAL OF WALD SIDE STEPS FOR TOYOTA 30 ALPHARD SR SA S PLEASE READ THIS MANUAL CAREFULLY BEFORE THE INSTALLATION HOW TO REPLACE OEM INNER PANELS i Please purchase double sided tape primer and caulking glue at auto accessory shop or hardware store F Completely degrease and paint primer on all i the installation positions to enhance the viscidity OEM side steps are fixed to the of double sided tape doors with their nails Use dryer to warm double sided tape to enhance i the viscidity in low temperature Keep the car in a dry condition more than 24 hours after gluing Do not wash the car during this time The above picture is the OEM side steps after taking off from the doors The above picture is the one after unfastening all the nails Split these side steps to door panels and inner panels XDo the same work on front doors and slide doors s a wi Linen Pave aa E og Se X pA INS
6. ance Use caulking glue Please check the fitment and all the details regularly fix the bolts and nuts as necessary the viscidity in low temperature E The instruction of painting is just our recommendation please paint it as you like X PLEASE BE AWARE OF to E You may lose the warranty and all the services from the car maker because of replacing OEM parts 24 hours after gluing ee E Reduced road clearance may cause inconvenience in using parking curbs and garage jack Do not wash the car during this time E FRP ABS and PPE products are slightly weaker than OEM parts in crashes Aa E The product may not match the body and OEM color perfectly GRILLE COVER BEFORE PAINTING 1 Take off license plate and temporarily install WALD Grille Cover to the body X Adjust the details of WALD Grille Cover to fit the body by rasps or sandpapers 2 Paint WALD Grille Cover after checking the right position A E Use rasps or sandpapers to fit the products to the body if there is an individual difference to fill the gap Keep the car in a dry condition more than E oo AFTER PAINTING 3 Completely degrease the installation position 4 Use caulking glue to install WALD Grille Cover to the body 5 Check all the details of the fitment 6 Leave it till completely fixed X N vP ATTACHED BOLTS M6 x 20 To Hold License Plate A ATTENTION X
7. double sided tape SIDE STEPS E We assume no responsibility for any damage resulting from improper installation painting primer and caulking glue at modification and any cut wound in unsealing bi auto accessory shop or hardware store ATTENTION E Contact the car dealer when you have any question in removing OEM parts rt E During all the installation process use parking brake and stop the engine completely He Completely degrease and paint primer on all E Use rasps or sandpapers to fit the products to the body if there is an individual difference the installation positions to enhance the viscidity E The product is made of FRP Handle with care Do not give the excessive force tt AN a SR eh te Se E ces Gradually fix the bolts and nuts by checking the fitment and balance of the installation i of double sided tape i E Check the fitment and adjust all the details of the fitment steady and proper Use dryer to warm double sided tape to enhance Use caulking glue i Please check the fitment and all the details regularly fix the bolts and nuts as necessary the viscidity in low temperature ir m oa Tie Eep d et i E The instruction of painting is just our recommendation please paint it as you like ni i 4 ni etween the produc PLEASE BE AWARE OF 7 Nae the HH in dry condition more than and the body E You may lose the warranty and all the services from the car maker because of replacing OEM parts Ours ater g
8. ghtly weaker than OEM parts in crashes E The product may not match the body and OEM color perfectly FRONT HALF SPOILER BEFORE PAINTING 1 2 3 4 Temporarily install WALD Front Half Spoiler to the body Adjust the details of WALD Front Half Spoiler to fit the body by rasps or sandpapers Mark the location of the holes for the attached tapping screws after checking the balance Y Take off WALD Front Half Spoiler then make holes according to the marked positions Paint WALD Front Half Spoiler according to the picture AFTER PAINTING 5 6 7 8 Completely degrease the installation position then use calking glue to install WALD Front Half Spoiler to the body Temporarily fix the attached tapping screws Check all the details of the fitment then tighten the attached screws Leave it till completely fixed XWALD SHOWCAR IS PAINTED LIKE THE PICTURE STEP 4 primer and caulking glue at auto accessory shop or hardware store fe ees ett wa hen tan es PARTS ST QUANTITIES Please purchase double sided tape FRONT HALF SPOILER FRONT HALF SPOILER 1 TAPPING SCREWS M4 X 16 4 i j Completely degrease and paint primer on all the installation positions to enhance the viscidity i of double sided tape Use dryer to warm double sided tape to enhance the viscidity in low temperature i Keep the car in a dry condition more than E You may lose the warranty and all the services from t
9. he car maker because of replacing OEM parts i 24 hours after gluing ee i Do not wash the car during this time Use caulking glue to fill the gap ne between the product is and the body AR Win ANNE j j W TL Y ST M Installing WALD Front Half Spoiler with widening to open slightly due to the tight fitting ZN ATTENTION X MORE THAN 2 TECHNICIANS ARE NECESSARY IN THIS WORK DURING ALL THE INSTALLATION PROCESS PLEASE BE CAREFUL NOT TO DAMAGE THE BODY X DEGREASE ALL THE INSTALLATION POSITIONS AND REMOVE THE BODY PROTECTION COATING BEFORE THE INSTALLATION X ADJUST ALL THE DETAILS OF OUR PRODUCTS TO FIT ON A CAR PERFECTLY lt 0 WALD INTERNATIONAL WALD INTERNATIONAL ADD 10 13 KYOGUCHI CHO TAKATSUKI OSAKA JAPAN uy ATTACHED TAPPING SCREWS M4 x 16 2 d g 2 f a Y ZIP 569 0072 TEL 81 72 673 3000 FAX 81 72 673 3003 2015 09 KOINA INSTALLATION MANUAL ALPHARD SR SA S opos 2015y ini AAA L a Sportliche Autoausr stung WALD International THANK YOU FOR PURCHASING THIS IS THE INSTALLATION MANUAL OF WALD SIDE STEPS FOR TOYOTA 30 ALPHARD SR SA S PLEASE READ THIS MANUAL CAREFULLY BEFORE THE INSTALLATION X NO RETURNS CAN BE ACCEPTED BECAUSE OF IMPROPER INSTALLATION OR PAINTING ii tf OOOO OPARTS O QUANTTTES X CHECK THE FITMENT AND ADJUST ALL THE DETAILS BEFORE PAINTING Please purchase
10. luing ee E Reduced road clearance may cause inconvenience in using parking curbs and garage jack Do not wash the car during this time E FRP ABS and PPE products are slightly weaker than OEM parts in crashes Aa i E The product may not match the body and OEM color perfectly i SIDE STEP BEFORE PAINTING 1 Remove OEM sidesteps according to the TOYOTA service manual 2 Use OEM anchors to temporarily install WALD Side Steps to the body X Adjust the details of WALD Sides Steps to fit the body by rasps or sandpapers 3 Mark the location of WALD Side Steps with the masking tape after checking the balance 4 Paint WALD Side Steps according to the picture AFTER PAINTING 5 Remove OEM inner panel from OEM side steps then replace to WALD Side Steps As per enclosure 6 Completely degrease the installation position 7 Use caulking glue to install WALD Side Steps to the body 8 Use OEM tapping screws to fix WALD Side Steps tightly X After completely fixed use OEM tapping screws on the slide door 9 Leave them till completely fixed XWALD SHOWCAR IS PAINTED LIKE THE PICTURE STEP 4 l MATTE BLACK OEM TAPPING SCREWS X The edge of WALD Side Steps has the concave shape to make the space OEM TAPPING SCREW to dodge OEM rear fender XAfter completely fixed with caulking glue use OEM tapping screws on the slide door OEM ANCHOR Z ATTENTION X MORE THAN 2 TECHNICIANS ARE NECESSARY I
11. per 3 Mark the location of the holes for the attached tapping screws after checking the balance 4 Take off WALD Rear Skirt then make holes according to the marked positions f i About 236 5 Paint WALD Rear Skirt according to the picture en mm i Straight length from the boarder line AFTER PAINTING between OEM rear fender and bumper 6 Completely degrease the installation position then use calking glue to install WALD Rear Skirt to the body 7 Check all the details of the fitment then fix the attached tapping screws tightly MO B About 43 mm 8 Leave it till completely fixed ef From the bottom of OEM parking sensors to the top of WALD Rear Skirt IILOCATION OF WALD REAR SKIRT STEP 2 XWALD SHOWCAR IS PAINTED LIKE THE PICTURE STEP 5 Refer to the above instruction Refer to the above instruction MATTE BLACK MATTE BLACK SILVER ATTACHED TAPPING SCREWS M4 x 16 ZN ATTENTION X MORE THAN 2 TECHNICIANS ARE NECESSARY IN THIS WORK DURING ALL THE INSTALLATION PROCESS PLEASE BE CAREFUL NOT TO DAMAGE THE BODY X DEGREASE ALL THE INSTALLATION POSITIONS AND REMOVE THE BODY PROTECTION COATING BEFORE THE INSTALLATION X ADJUST ALL THE DETAILS OF OUR PRODUCTS TO FIT ON A CAR PERFECTLY lt 0 WALD INTERNATIONAL WALD INTERNATIONAL ADD 10 13 KYOGUCHI CHO TAKATSUKI OSAKA JAPAN ZIP 569 0072 TEL 81 72 673 300
12. ware store j Completely degrease and paint primer on all i the installation positions to enhance the viscidity of double sided tape Fn i aaa AE Pea a Use dryer to warm double sided tape to enhance Use caulking glue the viscidity in low temperature to fill the gap Keep the car in a dry condition more than between th product i Keep A y and the body 24 hours after gluing i Do not wash the car during this time E The product is made of FRP Handle with care Do not give the excessive force Gradually fix the bolts and nuts by checking the fitment and balance of the installation E Check the fitment and adjust all the details of the fitment steady and proper Please check the fitment and all the details regularly fix the bolts and nuts as necessary E The instruction of painting is just our recommendation please paint it as you like X PLEASE BE AWARE OF You may lose the warranty and all the services from the car maker because of replacing OEM parts E Reduced road clearance may cause inconvenience in using parking curbs and garage jack E FRP ABS and PPE products are slightly weaker than OEM parts in crashes E The product may not match the body and OEM color perfectly REAR SKIRT BEFORE PAINTING 1 Temporarily install WALD Rear Skirt to the body X Adjust the details of WALD Rear Skirt to fit the body by rasps or sandpapers 2 Check the balance of the installation position of WALD Rear Skirt on OEM rear bum
Download Pdf Manuals
Related Search