Carina 2.7 MB - handicareproducteducation.com
Contents
1. Column A measurement is in cm and weight is in kg Column B measurement is in inches and weight is in Ibs Ready life A B 35 13 8 J 49 19 3 K 55 21 7 L 64 5 25 4 M 123 48 5 N EM 34 5 76 06 N EE 36 79 37 O 17 5 38 58 Q 30 11 8 M is turning diameter N is total weight of lift 0 is the weight of the heaviest component P is movement in forward direction R is referencemeasure 70 cm with max legspreading S is minimum distance from wall to slingbar at maximum height legs spread T is minimum distance from wall to slingbar at maximum reach legs spread U is minimum distance from wall to slingbar at minimum height legs spread Ready life Charging batteries Connect the adaptor to the lift and to a wall outlet Check to ensure that the LED lamps marked Power and Full light up The Power and Full LED lamps indicate that the battery receives power during charging Indication of battery charge level The Charge 1 lamp lights if the battery charge level is lower than 25 The Charge 2 lamp lights if the battery charge level is lower than 50 Lock the castor wheels when charging the battery NOTE Before the lift is used for the first time it must be charged for at least 4 hours Charge batteries regularly for maximum longevity We recommend daily charging when the li2. lift with warm water or rubbing alcohol and ensure that the castor wheels are free of dirt and hair Do not use cleaning agents containing phenol or chlorine as this may damage the material Storage If the lift is not to be used for some time or e g when transporting we recommend that the emergency stop button be pressed in Store the lift at a temperature exceeding freezing point and at normal relative humidity about 60 Service agreements RoMedic offers the possibility of service agreements for maintenance and regular testing of your mobile lift Contact your local RoMedic representative Ready for life is a series of assistive devices that are designed to give patients the best possible conditions for living an active life on a daily basis The products have been specially developed to meet the conditions of a home care setting Ready for life offers the right quality the right function and the right performance at the right price The transfer assistive products can be used either independently or as a complement to products in the SystemRoMedic range Maximum load Different products on the assembled lift system ie lift slingbar sling scale and other accesories may have different max loads It is always the lowest maximum allowable load indicated for the respective products on the system that applies for the entire system Always check the markings on all products in the unit and contact RoMedic with any questions 11 Rea
3. or the base width adjustment only works in one direction Check the follow ing That all cables are properly and securely connected Pull out the contact and plug it in again firmly If the lift is still not working properly contact RoMedic If the lift makes unusual noises Try to locate the source of the sound take the lift out of operation and contact RoMedic Ready hfe Accessories Slings The RoMedic Slings are available in different fabrics and are a series of several sling models The choice of model and material is determined by the patient s functional capacity and the situations in which the product is to be used For slings and other lifting accessories see RoMedic s user manual for slings Slingbars SlingBar S SlingBar M SlingBar L StretcherBar and StretcherSling for lifting in the horizontal position RoMedicScale for weighing patients who use patient lifts Extra batteries Positioning aids TopSheet SafeHandlingSheet RoMedicClips 10 Ready ite Other maintenance details The lift must undergo thorough inspection at least once per year This must be done by authorized RoMedic service personnel and in accordance with RoMedic s service manual Repairs and maintenance may only be done by authorized personnel using original spare parts Spent batteries are to be left at the nearest recycling station or returned for recycling to RoMedic or a RoMedic dealer Cleaning When necessary clean the
4. Manual Carina350EM EE Readyt ite CE Boom Mast Handlebar Control box Emergency stop Rear castors with brakes SlingBar with safety latch Front castors Emergency lowering mechanical 10 Motor actuator for boom 11 Locking handle 12 Motor for base width adjustment EE 13 Pedal for base width adjustment EM Strap im Sen oS Sh 13 i 10 GI Z A EE Max load 160 kg 352 Ibs Mobile lift Carina350EM EE has been developed to meet most lifting needs in combination with the right accessories It is intended for lifting in a seated or horizontal position Carina350EM EE is collapsible and therefore easy to transport and store Carina850EM has manual base width adjustment and Carina350EE has electrical base width adjustment cS Functional inspection Visual inspection Inspect lift functions regularly Check to ensure that material is free from damage K Always read the instructions Read instructions for all assistive devices used in connection with transfers Keep the manual where it is accessible to users of the product Do not leave the patient unattended during a lifting situation Before use Make certain the lift is properly assembled Check Slingbar connection and safety latch function Check lift lifting function and base width adjustment Under no circumstances may the lift be used by persons who have not rece
5. dyter nfe Ready for life is a series of assistive devices that are designed to give patients the best possible conditions for living an active life on a daily basis The products have been specially developed to meet the conditions of a home care setting Ready for life offers the right quality the right function and the right performance at the right price The transfer assistive products can be used either independently or as a complement to products in the SystemRoMedic range RoMedic s products are developed on an ongoing basis which is why we reserve the right to modify product designs without prior notice Contact your RoMedic representative for information advice and updates When in doubt contact your RoMedic representative for product trials advice or information If you require additional information contact your transfer specialist or our representative or visit www romedic com Make sure you always have the most recent version of the manual Manuals are available for downloading from our website http www romedic com RoMedic AB Veddestav 15 Box 640 Tel 46 0 8 594 773 33 Internet www romedic com i SE 175 27 J rf lla Fax 46 0 8 59477344 E mail office romedic com RoM ed IC SWEDEN A company in the Handicare Group
6. ension strap that holds the boom and lift the boom up 6 Remove the actuator from the mount on the mast and move it to the mount on the boom image 2 7 Check all mounting fixtures and locking handles images 1 and 2 8 Connect charger cable image 3 9 Release the emergency stop image 3 and perform a final inspection see final inspection Emergency stop To collapse the lift again follow the instructions below 1 Lock castor wheels 2 Run the boom to the lowest level 3 Loosen the actuator from the boom and mount it on the mast Connection for image 4 charging cable 4 Lower the boom and secure it to the mast with the tension strap a NOTE Warning for risk of pinching between boom and mast 5 Loosen the locking handle at the base of the mast image 1 6 Lift up on the mast and lower it towards the undercarriage 7 Pull the mast back and tighten the locking handle image 1 Ready ite Final inspection Inspect the lift for signs of wear and damage Check all four castor wheels and castor wheel locks Check all connections and fixtures including screws and bolts Check the packaging for any loose bolts and screws If you find any locate their intended positions on the lift and replace them Check emergency stop function by depressing the emergency stop and then pressing either the Up or Down button If nothing happens when the Up or Down buttons are pressed the emergency stop is f
7. ft is in daily used The emergency stop button must be pulled out during charging Handset Manoeuvring Raising lowering the boom Arrows indicate direction of travel Motion stops as soon as the button is released Widening narrowing the base model EE Markings on the buttons indicate function Motion stops as soon as the buttons are released Base width adjustment Manual base width adjustment model EM Push down on the respective pedals at the back of the lift to widen and narrow the base Electrical base width adjustment model EE Use the buttons on the handset to adjust the base width of Carina350EE The buttons are marked with symbols to indicate widen ing narrowing Ready Nfe Emergency stop To activate emergency stop Press the red emergency stop button on the control box Resetting Turn the button in the direction of the arrows until the button pops out Emergency lowering Mechanical emergency lowering For emergency lowering turn the round plastic knob on the actuator clockwise Electrical emergency lowering There is an Up Down button on the control box Trouble shooting If the lift is not working properly up or down check the following The emergency stop device is not pressed in All cables are properly connected The battery charges via the adaptor If the lift is still not working properly contact RoMedic The lift can be raised but not lowered or vice versa
8. ived instruction in the operation of the lift 2 Manual nr 00881En Ver 1 090716 RoMedic A company in the Handicare Group Table of contents Technical information Important information Assembly Final inspection Dimensions Carina850EM EE Charging batteries Handset Base width adjustment Emergency stop emergency lowering Trouble shooting Accessories Other maintenance details Max load 6 7 10 11 11 Ready life Technical information Lifting speed 23 mm s without load Batteries Two 12V 2 9 Ah valve regulated sealed lead accumulator gel type batteries Charger Max 400mA Motor mast DC 24 V 5 5 A IPX4 Operating time 10 maximum continuous in 2 minutes max 5 directional changes per minute Push 6 000N Motor base DC 24 V 5A IPX4 Operating time 10 maximum continuous in 2 minutes max 5 directional changes per minute Push 3 000N Sound level With load up 54 dB A down 54 dB A Material Aluminium Emergency lowering Mechanical and electrical Wheels Front 75 mm rear 75 mm IP class IPX4 Weight 34 kg Expected service life 10 years Pressure Handset Buttons on handset 4 N ia The device is intended for indoor use Type B according to the degree of protection against electric shock Important information e The lift must be assembled according to the assembly instructions provided by RoMedic e Warranty applies only if repairs or alteratio
9. ns are made to the product by personnel who are authorized by RoMedic e Batteries control unit and actuators on the lift must not come in direct contact with water e To ensure optimal function the lift must be inspected regularly See section on other maintenance details e Under no circumstances may max load be exceeded See section on technical information and the product decal on the lift e Never move the lift by pulling on the actuator a notpush e The lift may only be used on a level floor e Lifting accessories must be properly trial fitted and tested in relation to the patient s needs and functional ability e Carina350EM EE must not be charged in a wet room or used in connection with showering and bathing e The lift must not be exposed to running water Readyt te Assembly of Carina350EM EE Check to ensure that all components are included Mast with boom lift motor slingbar and control box Undercarriage with base width adjustment motor EE or base width adjustment pedals EM Handset and cord Locking handle for mounting mast on undercarriage Instructions charging cable and power supply cord for charging The lift is collapsed when delivered Set up the lift without tools accord ing to the following instructions 1 Lock castor wheels 2 Loosen the locking handle at the base of the mast image 1 3 Pull out lift up boom and place it in the base 4 Tighten locking handle image 1 5 Loosen the t
10. unctioning properly Grasp the handset press the Up button and run the boom all the way up Then press the Down button and run the lift all the way down Test base width adjustment function by pressing the button for base width adjustment model EE Widen the base to max width and then press the other button to narrow it again Test base width adjustment function on model EM by pushing down on the respective pedals for widening and narrowing the base Test lift function by lifting a person not a patient using an approved sling At the same time check the emergency lowering function with someone on the lift If the equipment is satisfactory upon inspection connect the freestanding adaptor for charg ing to the lift and to a power outlet and then check to ensure that the charging lamp on the control box lights up NOTE Before the lift is used for the first time it must be charged for at least 4 hours See section on charging batteries Always keep the manual near the lift Ready life Dimensions Cy A A 126 5 H E B 102112 le 111 D 86 i E 11 7 F 6 BA G 52 163 i H 57 Column A measurement is in cm and weight is in kg Column B measurement is in inches and weight is in Ibs B 49 8 40 2 44 1 43 7 33 9 4 3 2 4 20 5 64 2 22 5 Dimensions hb
Download Pdf Manuals
Related Search