Passenger Grab Rail Instruction Sheet - Harley
Contents
1. Service Parts Item Description Quantity Part Number 1 Grab rail 2 Protective tape Not Sold Separately 59574 09 1 of 12. cMOTOR HARLEY DAVIDSON AUA J04649 INSTRUCTIONS REV 2010 09 10 PASSENGER GRAB RAIL GENERAL Kit Number 97026 09 Models For model fitment information see the P amp A Retail Catalog or the Parts and Accessories section of www harley davidson com English only WARNING The rider s safety depends upon the correct installation of this kit Use the appropriate service manual procedures If the procedure is not within your capabilities or you do not have the correct tools have a Harley Davidson dealer perform the installation Improper installation of this kit could result in death or serious injury 00333a Kit Contents See Figure 1 and Table 1 INSTALLATION NOTE This grab rail kit can be installed over back rest kits 52587 09 and 52589 09 1 Remove seat using owner s manual instructions 2 Remove protective caps and nuts from stud plate Save nuts for reuse Leave plastic washers in place 3 Apply protective tape 2 to the fender to align with the studs 4 Install grab rail to stud plate and install nuts and tighten to 5 8 ft lbs 6 8 10 8 Nm J04649 WARNING After installing seat pull upward on seat to be sure it is locked in position While riding a loose seat can shift causing loss of control which could result in death or serious injury 00070b 5 Install seat SERVICE PARTS is05491 Figure 1 Service Parts Passenger Grab Rail Table 1
Download Pdf Manuals
Related Search