Operation Manual - AECO Sales & Service
Contents
1. 2 Check that the electrical outlet has power If the HFD does not heat up to the normal temperatures or is not heating properly Turn the HFD off then on and confirm there are no error codes 1188858 for review 8 Vendo s NDENVENDO AMERICA INC CLEANING Prior to cleaning insure the HFD is off and allow the HFD to cool Keep HFD clean for optimal performance Do not place dirty pans on hot plate surfaces Clean pans thoroughly prior to placing food on pans or use paper liner on pans Keep area around unit clean and clear Do not use abrasive materials on hot plates or glass Use only mild soap and water or nonabrasive cleaners with a soft cloth or sponge then wipe dry To remove the rear sliding doors HFD only by lift the door up from bottom track and pull bottom of door out Installation is reverse Remove the rear sliding door tracks by lifting at one edge Tracks are flexible for ease of installation and removal Clean food particles from door tracks Clean surface under door tracks also Once the rear doors are removed clean inside the HFD Wipe off any food particles from all shelves gaskets and glass Clean glass and gaskets around door assembly Clean front of shelves and point of sales displays Clean outside of unit with a damp cloth and wipe dry To open front glass HFD model only Reach fingers under the front edge of the glass oqueeze the two hidden latches and pull the door open To close Push on th2. away from heat sources Do not hang from the door this may cause injury or electric shock Y To prevent injury do not allow children to climb on or play on the HFD Turn off and unplug HFD before servicing and let HFD cool before cleaning or servicing Use proper tools while servicing Vendo s NDENVENDO AMERICA INC The HFD temperatures are factory set to Use only authorized replacement parts meet NSF food safety requirements Changing temperature settings may Don t place food directly on the hot plates adversely impact food safety If the HFD malfunctions turn it off and The lamps are an integral part of the food unplug it Have the HFD serviced by heating system If a lamp is not illuminated qualified personnel the temperatures may not be maintained for food safety Therefore replace nonworking lamps INSTALLATION REQUIREMENTS The HFD must be connected to a dedicated 115V 15A or greater grounded circuit Install the HFD on a strong level surface to Test for proper grounding and polarization prevent it from tipping or falling before installing to reduce the risk of electrical shock and fire Keep the HFD four inches away from walls and other products to prevent abnormal heating 1188858 for review 5 Vendo s NDENVENDO AMERICA INC PRODUCT SUMMARY Hot Food Display name HFD Mini HFD Low Profile HFD Model HFD000001 2 3 4 HFDMO00001 HFDL00001 Approx Internal
3. important to understand these warnings are not exhaustive SandenVendo could not possibly know evaluate or advise of all of the conceivable ways in which service might be done nor can oandenVendo predict all of the possible hazardous results The safety precautions outlined in this manual provide the basis for an effective safety program Use these precautions along with the service manual when installing or servicing the HFD We strongly recommend a similar commitment to safety by every servicing organization Only properly trained personnel should have access to the interior of the machine This will minimize the potential hazards that are inherent in electrical and mechanical devices SandenVendo has no control over the machine once it leaves the premises It is the owner or lessors responsibility to maintain the Hot Food Display in a safe condition Follow all Safety Warnings and Installation Requirements in this manual Refer to the Technical Service Manual for recommended maintenance procedures lf you have any questions please contact the Technical Services Department of SandenVendo 1188858 for review 2 Vendo s NDENVENDO AMERICA INC SAFETY WARNINGS The HFD is for indoor use only Do not use near water or in condensing humidity To prevent electric shock or fire do not kink pull or pinch the power cord and insure no equipment is resting on the power cord If the power cord is damaged unplug and replace Do not conn
4. within 3 seconds will advance the timer to 2 hours 3 hours 4 hours then back to 1 hour Front Door If the front door is opened HFD only the controller turns off only the lights The display reads OPEn After closing the front door the lights turn on and the display reverts to internal ambient temperature Error Codes E30 Inside ambient thermistor error open circuit E60 Upper left shelf thermistor error open circuit excludes LP HFD E63 Middle left shelf thermistor error open circuit excludes LP HFD E66 Lower left shelf thermistor error open circuit E61 Upper right shelf thermistor error open circuit HFD only E64 Middle right shelf thermistor error open circuit HFD only E67 Lower right shelf thermistor error open circuit E90 Unable to read SD card Clear error codes by pressing any key except for E90 error Clearing an error code turns that shelf s heater off Clear the E90 error by pressing the power button then press again to turn HFD on again Loading the SD Card Program in the HFD controller With the HFD on Insert the SD card in the controller s SD card slot until it clicks in place The HFD display with show dashes while the program is loading Loading will take about 5 to 30 seconds Once loaded the display will revert to internal ambient temperature Press don t pull the card to remove it from the slot p S D IM es TROUBLESHOOTING If the HFD does not come on 1 Check that the HFD is plugged in
5. Vendo s NDENVENDO AMERICA INC HOT FOOD DISPLAY Operation Manual Models HFD000001 2 3 4 Table of Contents Commitment to Safety Safety Warnings Installation Requirements Product Summary 6 7 Troubleshooting 8 9 1188858 for review 1 Vendo s NDENVENDO AMERICA INC A COMMITMENT TO SAFETY The SandenVendo is committed to safety in every aspect of our product design SandenVendo is committed to alerting every user to the possible dangers involved in improper handling or maintenance of our equipment The servicing of any electrical or mechanical device involves potential hazards both to those servicing the equipment and to users of the equipment These hazards can arise because of improper maintenance techniques The purpose of this manual is to alert everyone servicing SandenVendo equipment of potentially hazardous areas and to provide basic safety guidelines for proper maintenance This manual contains various warnings that should be read and carefully followed to minimize the risk of personal injury to service personnel This manual also contains service information to insure that proper methods are followed to avoid damaging the Hot Food Display HFD or making it unsafe It is also
6. Volume cubic feet liters External Dimensions 35 3 x 19 7 x 27 6 24 9 x 19 7 x 27 6 35 3 x 19 7 x 15 0 W x D x H inches mm 896 x 500 x 700 632 x 500 x 700 896 x 500 x 381 Approximate weight lbs kg 154 Ibs 70 kg 122 Ibs 55 kg 94 Ibs 44 kg eMe coches neato 6 x 141 Watt 4 x 141 Watt 2 x 141 Watt plates Lamps for heating and Six 40W Xenon Three 40W Xenon Two 40W Xenon illumination Glass ANSI Standard Z97 1 Tempered Six temperature controls Four temperature Two temperature controls controls i Ao dd 140 235 F 140 235 F Timers 12 Timers settable from 15 minutes to 4 hours Power 115VAC 60Hz 8 5 amp 115VAC 60Hz 6 amp 115VAC 60Hz 3 2 amp Rectangular Trays Accessories Round Pans none none Safety Approvals UL 197 CSA C22 2 No 109 81 UL File E314888 UL File E314888 UL File E314888 UL File E314889 for HFD000001 2 3 Sanitation Approval NSF ANSI 4 NSF Listing Serial D052450 for HFED000004 6 ft 170 liter 4 1 ft 116 liter 2 4 ft 68 liter Controller NSF Listing Serial NSF Listing Serial D052450 D052450 1188858 for review 6 Vendo s NDENVENDO AMERICA INC OPERATION Display and Keypad U Left Upper Right Tim Shelf Timers _Power Button _ Shelf Timers LED Display Power Button e PI Os Lower Left Shelf Timers SD card slot Middle Right Shelf Timers Middle Left Shelf Timers Lower Right Shelf Timers Timer Setting
7. and Operation Note to help prevent keypad damage push keypad buttons only with finger or thumb do not use fingernail utensil tool pen or other object Normal Operation Pressing the power key turns the HFD on or off When controller is off all lamps heaters displays and indicators will be off Timers When a timer is off pressing the timer button once sets the countdown timer to the value loaded into the controller by the SD card Three seconds from the last press of the timer button starts the timer The LED next to the shelf timer button becomes green The display then reverts to HFD internal ambient temperature display Once a timer is started pressing a timer key displays the remaining time for 4 seconds then shelf temperature for 4 seconds and then the display reverts to the internal ambient temperature display At 15 minutes remaining time the LED blinks yellow When no time remains the LED blinks red plus an audible alarm sounds The alarm sounds once per minute Pressing timer key clears the alarm and restarts the timer Holding down the Time key then pressing a timer key turns off the timer 1188858 for review 7 Vendo s NDENVENDO AMERICA INC Timer Manual Adjustment Timers can be manually adjusted from one to four hours To manually set the timers 1 Insure the timer is off 2 Press the timer button once and press again within 3 seconds This will advance the timer to 1 hour 3 Repeating this process
8. e lower metal frame until the latches click 1188858 for review 9
9. ect with other plugs Do not use an extension cord 1188858 for review When unplugging first turn off the power switch Then pull the plug at the end of the power cord not by pulling the power cord since the cord can be damaged overheat and cause a fire Do not spray water on the HFD It may cause an electric shock or fire M PNN ul Do not touch the power plug switches or other electrical parts with wet hands It can cause an electric shock Periodically check that the plug is pushed in all the way Vendo s NDENVENDO AMERICA INC SAFETY WARNINGS continued To prevent injuries due to falling objects liquid spills electric shock or fire do not place heavy objects or liquid filled objects on top of the HFD To prevent electric shock or fire do not use volatile or flammable products in or near the HFD When moving the HFD turn the HFD off unplug and allow the unit to cool To prevent glass breakage and injury do not push on the glass Also use proper equipment and lifting techniques Insure the product doesn t tip while it is being moved If a lamp or any glass cracks or breaks turn off the power and discard all food in the HFD Replace lamp and or glass Remove all glass fragments Carefully inspect all surfaces corners and gaskets to insure all glass fragments have been removed before returning HFD to service 1188858 for review Keep HFD out of direct sunlight and
Download Pdf Manuals
Related Search