better service manual for Pachinko games
Contents
1. loosen the wooden screw A for lifting C up O wood screw A ball transfer C handle rod When the handle comes off the ball transfer B bend the pestle upward by hammering A pestle B hammer for bending nen ge ten ET ET en ee When balls are irregularly bounced MEMO When the handle is too tight or heavy hammer C parts of the handle holder as shown by arrows for the light handle A pestle spring C handle ho ider When the pestle spring comes out too much hammer the pestle holder B in the direction of arrow for drawing back the point of the pestle pestle holder When the double nuts are loosely screwed screw the double nuts D firmly by pushing the handle to the handle rest When the pestle spring does not hit balls right in the center hammer or bend the pestle or the pestle spring for adjustment pestle spring seen from front seen from sid PRI NTED IN JAPAN2. DIRECTIONS FOR PACHINKO MACHINE SUTRA IMPORT CORP Contents When played out indicator lamp is on despite balls reserved in the reserved tank When balls reserved in the tank fall down despite balls remained in the supply apparatus When RENCHAN keeps getting clown ee When the handle creaks or sounds uncomfortable icc When balls are not filled in the ball sheath ow N D Metal Frame Played Out I ndicator Lamp Metal Frame Protection Band Decoration for Ball Sheath Jackpot Holder Jack pot Holder Plate Decoration A Ball Holder 40 Inside Frame Guage Rubber 42 Jackpot Tray 43 Lock 4 Name Plate 43 Plunger Cover 48 Handle 4d Decoration B 48 Finger Rest When shooting apparatus does not work well kenn 4 When shot balls stop at the top of the ball pick 00 5 How to switch the pestle spring een 5 When more prize balls than fixed flow out of the ball sheath When the bluke does not bite well ee 6 The position of the handle rod for the best shooting win When balls are irregularly bounced menu 7 Outside Frame Sophia Key Chuck Reserve Ball Pipe Reserve Ball Curve Scheduled Play out Switch Shaft Middle Tank Fluke preventing incompleteness 40 Lie Detector d Shutter Rod Tail Shoot of Safety Ball 43 Counter Connection Cornice Counter Terminal 49 Upper Tank 47 Ball Collect Case Ad Dampe
3. ails get stuck at bail acusstoming part acusstoming part and the coupling pipe by adjusting D or take out dirt in the coupling pipe A ball accustoming C ball sheath Adjustment of incompleteness preventer When the incompleness preventer does not stop the movement of RENCHAN while no balls are in the middle tank Adjust as shown Adjustment of supplying apparatus When balls are not supplied to the middle tank loosen E and shorten L for adjustment When balls fall down too much lengthen L When balls do not well flow out into the ball sheath twist the bracket of D for adjusting the shaft to the proper position when the connection pipe is not leveled with the ball sheath B A coupling connection balls sheath pipe pipe holder for pestle When quick shooting can not be done put the pestle screw to be shown out of the hole bv one roll and half For this purpose hammer the holder for pestle in the dirrection of arrow hand holder Secondly set a plier b tween the pestle and the handle holder to lower the handle down A When the handle is lifted up firstly cover the handle by the pipe When more prize balls When the crank touches the ball adjuster at D with the crank being moved up and down in the c fluke than fixed flow out of the position that C fluke is off as shown bend the crank at the fulcrum to remove touching sheath l A crank when fluke does not bite wel
4. arrow When the RENCHAN cannot afford to lift up the lie detector while the damper gets down lie detector bend the rod for adjustment damper RENCHAN lift When the ball sheath and the crank are delayed in getting back to the original positions 1 Clean dirt if any off balls by water 2 Give about 0 5mm play by bending up the bracket when there is no play on 6 and C in the direction of the axle 3 Change the parts for new if there is no playonD 4 Compare the number of weight and thickness of E with that of other machines If it is less increase the weight O ro the screw B for fitting the holder the holder Change the ball bearing for new or calk it Tighten the donble nuts refer to 3 on page 7 D ball bearing C double nuts When balls are incom pletely supplied in the ball sheath When the shutter is not required to be closed A leading plate switch 4 rod flange In case that no balls are left in the uoper tank when the shutter is not to be closed with the switch remained closed shutter rod Nail B for conuenience sake Lift up the leading plate of the switch When no balls are left in the upper tank the scheduled finished lever in the upper tank makes both of the shutter rod and the flange rod let down to lead A to close the switch but the shutter won t be lowered down Jai imm space between the center of ball When b
5. l B ball adjuster Too little interval between the fluke and the gt pin of the crank causes bad biting to the fluke Bend the pin upward for the proper interval of 3mm to 4mm slight touch When the point of the sheath is touched when the point of the crank is pushed upward to the maximum there must be 1 2mm interval which dan be made by bending upward the right part of the fulcrum of the crank l S 1 2m N When the ball pipe touches the crank at the back due to the pipe positioned in the un proper way reset the ball pipe upward by 2 3mm crank remove touching The position of thehandle position of the handle rod for the best shooting When the handle remains at the original position before being pressed down for adjust ment of x move the ball transfer B left or right for resetting for adjustment of y bend the ON handle rod handle rod B ball transfer When the handle is pressed down change the handle rod for proper length With the ball transfer pressed lightly to the left by finger and the handle rod moved back and forth make Imm interval for adjustment bet ween the handle rod and the ball transfer B When the top of the ball B touches the pipe When shot balls stop at put the top of it downward so it won t touch the ball pick vn crank point pipe When both ends of the ball pick touches the pipe adjust them
6. od When G touches H prevent G scheduled play out lever from touching H reserve tank for smoothly working G scheduled play shutter rod out lever When obstacles other than balls get into H reserve tank take them out H reserve tank Blu Clean dirts off to have G operate smoothly H reserve tank schedu led play out lever When loosen screw A When loosel y screwed When lever s H touch of a causes change of length of balance weight E causes part of the middle tank F shaft tighten the screw change in the position of E causes unproper work to H keeping the shaft in proper or E falls down moove E make sure that the mooving length so balsas to be and tighten E after putting part of the lever H must supplied properly supply apparatus D for not ouch the middle tank F reserve balls in the position that it can properly work supply apparatus _ balance D for reserve pale y weight A i j G transfer pipe F middle tank When the crank touches bounced ball adjuster When RENCHAN keeps O bend the crank in the direction of arrow as shown or vice versa P Mi ee BZ NN cramk when being touched bounced ball adjuster bend this part seen from top getting down 8 When the ball sheath touches the base bend in the direction for adjustment balli ssheathn thracket when being EA ne this part by plier in the direct gt ion of
7. r Protection Cover 49 Ball Sheath Protection Bell Pipe Ball Removing Pipe BASIC INSTRUCTIONS There are many models of Pachinko Machines but the undermentioned basic instructions are applicable to all the models 1 Put into Upper Tank as many balls as possible By the action of weight of balls contained in Upper Tank Shutter placed inside of 5 Plunger Cover is lifted up so that ball may enter Plunger Room Put the balls in 6 Jackpot Holder Now you can play 2 Always take care to keep Lie Detector in vertical position If it is kept in horizontal position the prize balls don t come out vertical position horizontal position 3 To open Front Window lift up A Lever To shut just push window in 4 To take out all the balls contained Upper and Middle Tanks lift down Lever and balls come out from 3 Counter Connection Comice Don t forget to lift up B Lever to the original position after having taken out bal Is 5 Keep always balls clean and not rusty When both A parts are connected with each When played out indicator other by sparkling keep 2 3mm between those connection point as shown after connection point is filed off B lamps is on despite balls gt F switch l reserved in the reserve ia O A tank Leading rod 2 G gets apart put G back to original position as shown by arrow with other machines refered to E shutter rod A leading r
8. to go up and down without touching the pipe ball pick B ae a pipe When the ball sheath touches the plywood surface adjust the fulcrum of the ball sheath not to touch the plywood Da ON see SODOM E ball sheath p ball accustoming When the connection between F and B does not work well with balls stopped swing the head of nail H to the right first Next clean dirt off the axles B A for the light movement F of the ball pick B and the fluke A _ H nail G control nail pipe O How to change the pestle spring How to remove it Turn it off to the left by plier pestle spring How to set it Turn it on to the right by plier When the lever is dirty clean balls in the amp When the shooting appa passage to have the number of shooting fixed when lifted up ball rolling apparatus ratus does not work well comest ball rolling apparatus When balls get stuck change the ball rolling apparatus When balls cannot be shot without the handle to be flipped down to the maximum adjust the handle rod Loosen the wooden screw A to have the ball trausfer C down ball transfer A SA level AN IW wooden screw A T ball transfer C handle rod pestle O of ON When a shot ball comes ahead of the pestle without the handle to be pressed down Adjust O the handle rod in case that it is bent too much as shown When the ball transfer C gets down too much
Download Pdf Manuals
Related Search