ACL Series - User Manual
Contents
1. DEvICE_1P 992 sslversion SSLv3 with DEVICE_IP being the IP address of the PDU Start stunnel with this config stunnel stunnel conf If you now Telnet to 127 0 0 1 on port 23 stunnel will tunnel the traffic over SSL to the specified IP Once connected you will be presented with a log in screen Use the admin credentials to gain full access From here it is possible to access the majority of the devices s functions Execute the HELP command for more information 2011 Racktivity NV 34 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 Management Information Base MIB A Management Information Base MIB is a virtual database used for managing the entities ina communications network and is most often associated with the Simple Network Management Protocol SNMP The ACL Master features a built in mib file which can be found at the following locations e By browsing to https DEVICE_IP RACKTIVITY MIB txt o with DEVICE_IP the IP of your ACL Master e By clicking the Download MIB file link on the Settings gt SNMP tab on the web portal Use this file to translate the OIDs Object IDentifiers to a more human readable state For more information on how to use the MIB file please refer to the documentation of your network monitoring software 2011 Racktivity NV 35 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 Upgrade Firmware Racktivi2. Voltage 100 240 VAC Operating Environment Operating temperature 0 C to 50 C 32 F to 122 F Storage temperature 10 C to 60 C 14 F to 140 F Humidity 5 to 85 RH non condensing Dimensions ACLM24 01 Dimensions cm WxHxD 7 1x9x5 8 Dimensions inch WxHxD 2 8 x 3 54 x 2 3 ACLS04 03 Dimensions cm WxHxD 8 8x9x5 8 Dimensions inch WxHxD 3 5 x 3 54 x 2 3 2011 Racktivity NV 6 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 ACLD24 02 Dimensions cm WxHxD 9x9x5 9 Dimensions inch WxHxD 3 54 x 3 54 x 2 32 User Account Overview The ACL Master has 3 types levels of user accounts admin restricted and guest The following table shows an overview of the functionalities of each type admin restricted guest Open website Yes Yes Yes Open CLI session Yes Yes Yes View current status states data amp values Yes Yes Yes Edit thresholds Yes No No Edit labels Yes No No Change SNMP notification settings Yes No No Edit device settings Yes No No View amp download logs Yes No No Default user name admin restricted guest Default password 1234 1234 1234 The same features and options apply to both the website and the Command Line Interface CLI To change the login credentials for the users please refer to the Error Reference source not ound chapter 2011 Racktivity NV 7 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 Safety Save these instruction
3. IP Address Assignment DEFAULT 1 Press the MENU button until the MENU appears select Network Settings using the DOWN button and press OK 2 Within the Network Settings menu select DHCP and press OK When the value DHCP ON is displayed the device already has dynamic IP assignment enabled skip to step 4 3 Use the UP button to select Apply Settings and press OK Press the MENU button to cancel or the OK button to apply the settings 4 Press DOWN to select IP Address and press OK to display the current IP address Note The currently active IP address is also shown on the main overview screen 5 Onacomputer in the same network use a browser to open the assigned IP address for example https 192 168 14 250 6 When surfing to the web portal a login screen appears The default user name is admin and the default password is 1234 2011 Racktivity NV 21 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 Manual IP Address Assignment 1 Obtain the correct IP address standard gateway DNS Server IP and subnet mask from your network administrator 2 Press the MENU button until the MENU appears select Network Settings using the DOWN button and press OK 3 Within the Network Settings menu select DHCP and press OK When the value DHCP OFF is displayed the device already has manual IP assignment enabled If not use the UP or DOWN buttons to change the value to DHCP OFF and press
4. MENU or OK to confirm 4 Use the UP button to select IP Address and press OK 5 Use the UP and DOWN buttons to change the currently selected value and press OK to select the next value When holding the UP and DOWN buttons you can speed up the changing of the values When ready press MENU to confirm and return to the Network Settings menu 6 Repeat the last two steps for the Subnet Mask Standard Gateway and DNS Server settings 7 Use the UP button to select Apply Settings and press OK Press the MENU button to cancel or the OK button to apply the settings 8 On a computer in the same network use a browser to open the chosen IP address for example https 192 168 14 250 9 When surfing to the web portal a popup appears requesting a username and password The default username is admin and the default password is 1234 2011 Racktivity NV 22 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 Web Interface Getting Started Supported Web Browsers The following browsers have been tested and certified to work with the ACL Master Web Interface on most platforms e Internet Explorer 11 or higher e Firefox 26 0 or higher e Chrome 31 0 or higher e Opera 12 11 or higher Other available web browsers may work with this device but have not been fully tested by Racktivity Logging in For instructions on how to set up the TCP IP settings to connect to the Web Interface please see the
5. The correct pin layout for the transducer connector is as follows from left to right o Pin 1 amp 2 T1 measuring L3 o Pin3 4 T2 measuring L2 o Pin5S amp 6 T3 measuring L1 o Pin 7 amp 8 T4 measuring N e Connect the transducer connector male to the transducer connector on the ACL Slave female e Open the core of the transducer enclose the power cable that needs to be monitored and close the core again Note To complete the next steps you ll need to be logged in to the Web Interface and have managed your ACL Slaves through an ACL Master Please refer to the Web Interface and Managing Slaves amp Displays chapters before continuing e Open the Web Interface of the ACL Master to which the ACL Slave is connected for the dry contacts you wish to configure e The ACL Slaves gt Contacts tab lists the 4 Contacts o Status Whether or not the Current State matches the Active State o Current State The current state of the connected Dry Contact o Active State Select which state HIGH or LOW is the intended active state o SNMP When checked an SNMP trap will be sent when the Current State changes e Press the Save button after performing changes 2011 Racktivity NV 15 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 Installing Dry Contacts Any potential free dry contacts can be used to connect to the Contact connector on the ACL Slaves To install a Dry Contact e Connect th
6. connected and managed will be assigned address 5 either Q5 or D5 depending on the type of module Based on the 2 Principle if you however remove the disconnected module Q2 first and then connect and manage a new module it will be assigned address 2 either Q2 or D2 depending on the type of module Note that a module does not need to be disconnected before it can be removed O 2011 Racktivity NV 31 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 Thresholds Thresholds can be configured and used so that you are notified through SNMP at certain events Many of the ACL Series parameters have settable thresholds To configure a specific threshold open the tab where the appropriate parameter is shown Threshold W Warning SNMP Warnin At least the following parameters have one or more settable thresholds e Voltage o Path ACL Slaves gt Voltage e Current o Path ACL Slaves gt Current e Power o Path ACL Slaves gt Power e Dry Contacts o An SNMP notification will be sent whenever the Current State for that Contact changes o Path ACL Slaves gt Contacts e Ambient o Path Environment gt Ambient Depending on the parameter one or more of the following types of thresholds will be available e Low When the measurement goes below this value an SNMP notification is sent e High When the measurement goes above this value an SNMP notification is sent To c
7. Connect the ACL Master directly to your computer please note that for this both devices need to have a valid fixed IP e Try opening the Web Interface with another browser e Connect to the ACL Master using a different computer e Power cycle the ACL Master if possible Knowing your device s IP address The IP address of your ACL Master is displayed on the main screen of its onboard display Press any of the navigation buttons to activate the screen 2011 Racktivity NV 37 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 Support Feel free to contact us if you need any support or have any other questions or remarks Online www racktivity com support E mail support racktivity com Phone 003293242095 GMT 1 2011 Racktivity NV 38 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4
8. Network Settings chapter To recover from a lost password please refer to the Troubleshooting chapter Use an internet browser to open the device IP address You will be asked for login credentials the default values for the administrator account are User name admin Password 1234 To find out everything about the different types of user accounts see the User Account Overview chapter Due to the nature of the default secure connection HTTPS and the workings behind authentication certificates any warnings regarding the connection self signed certificate can be ignored 2011 Racktivity NV 23 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 ACL Slaves ACL Displays Logged in as Admin Logout ACLM24 01 r_name 1_pos Management Environment Settings Overview of connected measurement modules Click Refresh to reload the status Module Status UID Firmware version Energy increment mode Locate Remove a Joma anos mn Banos cta ramo onz som men teats naman Always EEN aona pos ias tunas vote enmans _ ors sore mwas aat Sanaa as sa raas peonon ooe woe Awan EN 1 Sub tabs Displays the different sections of the selected main tab 2 User account Displays which type of User Account is currently logged in 3 Main tabs Displays the different functional sections of the device 4 Device info Displays the device name cabine
9. User Manual ACL Series Contents CONntents sco Annie ANA ae 2 Introducir debe el iy deca eine oneal eet 5 FO ACUIES ies eee A OEE 5 Applicable Models voca EA ia AE TA ATA 6 Sl II O A O 6 Electrical Ratings da e Ac e A her ado ek LA cele S 6 Operating Environ mea dd 6 DIMENSION PEET 6 User ACCOUNT OVERMIEW aanzaten ia rr etat dees 7 A A O A A 8 Certifica tad A oe oe ea eee 9 CM e ek a 9 Recycling asipo e r A Dal as Wee Re ial eee 10 Servicing amp REP nare ereen a ee we ed nde ede E R en Beene ee wen A 10 Additional Documentation annen en enne enenneevenserrsnenenneeeennereeneeennnenennenvennernnnenenndeeenneren 10 Getting Started O 11 Receiving Inspeetion nes nenten vane deden daden ennn ee eden a dense vies veges ends 11 INVENTON za rerena senteren ii lidia 11 Instala tenere a oren eneen Reed en deken real aandeel 12 Mounting the ACL Hardware assor anneneneererenensenserverseesnensnnsseverssnenannnnnseverssnsnannnnnsevensenens 12 AGL Master and Slaves ina dl iaa 12 AGL Display Zine Winch oon dee denken ea lenen eene eenn aa lech a eee tees 12 Connecting the ACL Hardware eveneens eereersersensanrsersensensennanrsersensennsnnenrsersenrsensensnrdeen 13 Installing TrINSAUCES 0 deter eeen dae de eren E Aa iet 14 Sn A ne tendre dn due idee 14 Instala A nz 15 Installing DY CONTA tsienen eia Ai tdt 16 OVERVIEW ir taranta rale eeen De aen a ee ae ea ela 17 LEE El EE 17 BED Sranan den a aen ae nen aans
10. Y Display LEDs ON The device is powered Power LED OFF No power is provided to the device O 2011 Racktivity NV 17 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 ACL Slave 1 7 ci c2 C3 C4 Racktivity A 1 TRANSDUCER Transducer connector requires male connector adapter 2 DRY CONTACT Dry contact connector requires male connector adapter 3 POWER Input voltage connector requires male connector adapter 4 BUTTON Diagnostics amp reboot button 5 R BUS 24V 24V R BUS which connects to the other ACL devices on the bus LEDs ON The device is powered Power x x OFF No power is provided to the device ON One or more alarms are currently active Alarm OR the button is pressed OFF There are currently no severe alarms active ON Input voltage detected L3 L2 L1 OFF No input voltage detected ON The current state equals the set active state C1 C2 C3 C4 OFF The current state equals the set active state 2011 Racktivity NV 18 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 ACL Display 1 DISPLAY Display NAV BUTTONS Menu Up Down and OK navigation buttons 3 R BUS 24V 24V R BUS which connects to the other ACL devices on the bus 2011 Racktivity NV 19 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity c
11. amount of devices mentioned above However the actual amount of devices that can be powered is determined by the type wire gauge and length of the RJ45 cables used to connect the R BUS connectors of the devices on the bus To increase the amount of devices that an ACL Master can power on its bus either upgrade the cables used or provide power on its Slaves L1 connection For example a typical setup using standard low cost 2 meter cat5e patch cables will only be able to power 16 ACL Slave modules e ACL Master 1 Attach the supplied 2 pins 24V connector to an existing 24VDC power cable by using the screws 2 Plug the power connector into the designated socket on the ACL Master 3 The POWER LED blue adjacent to the connector will become active e ACL Slave 1 Attach the supplied 5 pins connector to an existing 100 240 VAC power cable by using the screws AND OR Plug the RJ45 cable coming from an R BUS connector of a powered ACL Master ACL Slave or ACL Display into either of the R BUS connectors 2 The POWER LED blue on the front panel will become active 24V e ACL Display 1 Plug the RJ45 cable coming from an R BUS Y connector of a powered ACL Master ACL Slave or ACL Display into either of the R BUS connectors 2 The screen will light up For more info on how to manage the devices on the bus see the Managing Slaves amp Displays chapter 2011 Racktivity NV 13 38 Antwerpsesteenweg 19 9080 Lochr
12. aster is equipped with an onboard clock that can be setup to sync with e pool ntp org default e a custom NTP server e date amp time picker For more information regarding the configuration of the onboard clock please refer to the Device Settings chapter 2011 Racktivity NV 33 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 CLI Introduction The ACL Master has a built in Command Line Interface that can be accessed through Telnet or secure Telnet Telnet SSL Commands are typically sent to the separate modules An ACL Series setup consists of 1 Master module up to 32 ACL Slaves and up to 7 ACL Displays Each device is designated as a specific type e M forthe ACL Master e Qfor the ACL Slaves e D for the ACL Displays The Master will always have address M1 while the Slaves will have address Q1 to Q32 same for the Displays Connecting e Telnet Connect to the device IP on port 23 over Telnet using a 3 party tool i e Putty Please note that only Telnet over SSL is enabled by default This can be changed on the Settings gt Network subtab on the Web Interface of the ACL Master e Telnet SSL Connecting to Telnet over SSL can be achieved through several 3 party tools For example using stunnel cross platform Create a config file for stunnel called stunnel conf containing the following fips no cert stunnel pem client yes pdu accept 127 0 0 1 23 connect
13. e o Enable or disable this receiver e IP Address o The IP address of the receiver e Port o The network port on the receiver to use e Authentication profile o The authentication profile used to authenticate with the Trap receiver e Send test SNMP Trap o Sends a Heartbeat Trap to all configured SNMP Trap receivers Note Save any changed settings before using the button Note This button is disabled when SNMP Traps are disabled in the Global section Power Settings Path Settings gt Power Note Use the module selection dropdown list to select the correct ACL Slave The Power tab allows you to set the following for each managed ACL Slave e Energy Increment Mode The energy increment mode determines how the values on the ACL Slave gt Energy tab are calculated o Always All values will be incremented to calculate the energy o Only Positive Only positive values will be incremented to calculate the energy o Only Negative Only negative values will be incremented to calculate the energy e Transducer Settings Select the correct transducer type from the dropdown list for each of the connected transducers T1 T2 T3 T4 The transducer type is printed on the model label on each transducer Note Selecting an incorrect type of transducer will return incorrect values on the ACL Slave tab 2011 Racktivity NV 30 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 Managing Slaves amp Displays In order
14. e 2 ends of the dry contact cable to the correct 2 pins of the 8 pins dry contact connector male using a flathead screwdriver The correct pin layout for the dry contact connector is as follows from left to right o Pin1 amp 2 C1 o Pin3 84 C2 o Pin5 amp 6 C3 o Pin7 amp 8 C4 e Connect the dry contact connector male to the dry contact connector on the ACL Slave female Note To complete the next steps you ll need to be logged in to the Web Interface and have managed your ACL Slaves through an ACL Master Please refer to the Web Interface and Managing Slaves Displays chapters before continuing e Open the Web Interface of the ACL Master to which the ACL Slave is connected for the transducers you wish to set e On the Settings gt Power tab select the ACL Slave from the device dropdown list e Select the correct transducer type from the corresponding dropdown list in the Transducer Settings section and press the Save button e The measured metrics for that transducer are now available 2011 Racktivity NV 16 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 Overview ACL Master MENU 4 v oK CA Racktivity ME 1 LAN Ethernet connector with connectivity indicator LEDs 2 R BUS 24V 24V R BUS which connects to the ACL Slaves and ACL Displays 3 POWER Input 24V connector with power LED 4 NAV BUTTONS Menu Up Down and OK navigation buttons 5 DISPLA
15. e eee eee EE BEA a 30 POWEFSCttINGS iirc E Ae eee ane ee eee en de Ak ee ee ARS 30 Managing Slaves amp Displays cccccessssccecececsssesseaeeececeseesesaeaeeeeeeeseeseeseaeeeeeessseseaaeaeeeescesseseaaeaeeeeeens 31 PO Ms o ok a dE a 31 Thread 32 Resetting Measurements A iii 33 Network Time Protocol NTP ccccccccssscccsssssceceessececsessececsessececsesseeecsesaeeecsesseeecsesaeeecsesaeceesesaeeeeseaaes 33 El tt reeden A AAA AAA 34 MErOdUCHON siaine a iaa idas 34 CONNECTE ea Sees a a i 34 Management Information Base MIB cc cccccssssccecssscececssscececssesececseeseceeseesececsesseceeesseceeseeaeesesaaeess 35 Wpgrade Firmware aie ch ie ets eo ete le tees enden 36 Obtalning Fl escitas AA AAA AAA A eed andes 36 TFOUDIESHOOUING ii A AA A lane deelen 37 Resetting Login Credencial aa oa aN aa E Ea da sea Gores 37 Connecting to the Web Interface ccccononoononcnnnnnnnnononnnnnnncnnnnnononnnnnnnnnonnnononnnnnnnnnnnnnn nn nn nnnnnnanannnn raros 37 Knowing your devices IP address ccccccccccessssessaeeececeseeseneaecececeseesesaeaeeeeeceseeseaaeaeeeesessseseaeaeeeesees 37 SUPPO Et ee en EEE LEE ELLE En 38 2011 Racktivity NV 3 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 2011 Racktivity NV 4 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 Introduction Features The ACL Series Racktivity s newest addition
16. ervice personnel only Please refer to the Service Manual for RMA procedure Additional Documentation Additional documentation and support regarding the following subjects is available on the Racktivity website www racktivity com support e API manual overview amp examples e Servicing RMA documentation 2011 Racktivity NV 10 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 Getting Started Receiving Inspection Inspect the package see Inventory chapter and contents for shipping damage and make sure that all parts were received Report any damage immediately to the shipping agent and report missing contents damage or other problems immediately to your reseller Inventory Please verify the contents of the box Standard ACL Master Package Item ACLM24 01 24V power connector 2 pins Standard ACL Slave Package Item ACLS04 03 Power connector 5 pins Transducer connector 8 pins Dry contact connector 8 pins Standard ACL Display Package Item ACLD24 02 2011 Racktivity NV Antwerpsesteenweg 19 9080 Lochristi Belgium Quantity 1 1 Quantity 1 1 1 1 Quantity 1 www racktivity com 11 38 v 2014 4 4 Installation Mounting the ACL Hardware ACL Master and Slave Mount the ACL Master and or Slave to a horizontal DIN rail in your enclosure using the mounting slots at the back of the unit e Hold the unit with the top white slider o
17. etting is disabled see Traps chapter e Write Protection SNMP read only o With this setting enabled the device will not accept changes and SET requests over SNMPv2c or SNMPVv3 GET Walk etc requests are still allowed e Enable SNMP Traps o When enabled no SNMP Traps will be sent even when all other SNMP settings are configured correctly e Heartbeat Interval o Defines the interval in seconds at which Heartbeat SNMP Traps will be sent to the configured receivers Set to 0 to disable this feature e Download MIB file o The MIB files for your device more info in the Error Reference source not ound chapter Authentication Profiles The authentication profiles section is used to configure the available SNMP profiles for GET amp SET access At this time the following profiles are available e SNMPv2c o 1 profile o Requires community strings read write and trap e SNMPv3 o 3 profiles available o The SNMPVv3 profiles require all of the following parameters USM User Authentication passphrase auth MD5 e In text or hexadecimal format Privacy passphrase priv AES e In text or hexadecimal format Note Some SNMP monitoring tools will require the SNMPv3 Engine ID displayed in this section 2011 Racktivity NV 29 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 Traps In the Traps section up to 3 SNMP Trap receivers can be configured Each receiver contains the following e Enabl
18. hange a threshold enter the desired value into the appropriate input area and press the Save button If the background of the input area turns red an incorrect value has been entered Note Mostthresholds have corresponding SNMP checkboxes that enable disable the notification Please ensure that both the threshold and the appropriate SNMP notifications are set correctly O 2011 Racktivity NV 32 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 Resetting Measurements For many parameters the minimum maximum and or total is saved to give an easy overview of load activity These values can be easily reset by pressing the Reset link for that value Status Current A M Reset in Now Max Reset 19 6007 19 6034 19 6040 180751 180779 18 0785 16 6249 166270 16 6277 15 1504 15 1534 15 1540 Reset The following parameters have resettable values e Voltage o Path ACL Slaves gt Voltage e Current o Path ACL Slaves gt Current e Power o Path ACL Slaves gt Power e Energy o Note The values in the Accumulated columns cannot be reset to 0 o Path ACL Slaves gt Energy e Ambient o Path Environment gt Ambient Note Clicking a Reset link in the column header will reset all values in that column Network Time Protocol NTP Path Settings gt Device The Network Time Protocol NTP is a protocol for synchronizing the clocks of computer systems over networks The ACL M
19. ing the fields below it will be enabled or disabled Device IP Address o The IP address of the device Subnet Mask o The subnet mask of the device Standard Gateway o The IP address of the default node on the network DNS Server o The IP address of the Domain Name System DNS server Test Connection o Ping a device on the network to test network settings Note Save any changed settings before using this functionality Force secure web access HTTPS o Check to force secure HTTP web access Force secure Telnet access SSL o Check to force Telnet SSL access SNMP Settings Path Settings gt SNMP The ACL Master offers SNMPv2c and SNMPv3 communication GETs SETs and traps Notifications traps can be enabled or disabled for many of the device s functions For more info on setting SNMP notifications for specific thresholds see the Thresholds chapter O 2011 Racktivity NV 28 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 The SNMP subtab is divided into 3 sections Global Authentication Profiles and Traps Global The Global section of the SNMP subtab contains the following settings e Allow SNMPv2c GET amp SET o Toggles communication to and from the device using SNMPv2c Note SNMPv2c Traps can still be used when this setting is disabled see Traps chapter e Allow SNMPv3 GET amp SET o Toggles communication to and from the device using SNMPv3 Note SNMPv3 Traps can still be used when this s
20. isplay settings o Display timeout the idle time in minutes after which the ACL Master s onboard display goes into standby o Display lock when enabled the display and buttons cannot be used to change settings display becomes read only All changes must be made through the other available interfaces e Temperature o Temperature unit degrees Celsius C or Fahrenheit F e Web Interface o Website auto logout The time in minutes after which the session expires e Clock settings see the Network Time Protocol NTP chapter o Date amp Time Settings The real time clock dialog features several options Uncheck the Use NTP checkbox to be able to set a custom date amp time Uncheck the Use default NTP checkbox to not use an NTP server from pool ntp org and enter the custom IP address into the NTP address field Note Making changes to the date time settings will clear all Logging e System info o About this device Shows all relevant firmware and hardware info regarding your device and its managed modules Please provide this info when communication with Racktivity Support O 2011 Racktivity NV 27 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v2014 4 4 Network Settings Path Settings gt Network The Network subtab contains the Network and other security settings The following Network settings are available MAC Address o The MAC address of the device Enable DHCP o Toggle DHCP depending on this sett
21. isti Belgium www racktivity com v 2014 4 4 Installing Transducers Specifications The ACL Slave has been designed to communicate with a wide range of transducers as long as they meet the following criteria e Output voltage 4V 4V Note The ACL Slave features a fixed list of predefined transducer models with a wide variety of current ranges If you are uncertain that your preferred transducer is compatible with the ACL Slave please contact Support prior to purchase Note As seen on the diagram on the front panel of the ACL Slave the intended transducer setup is as follows e The transducer connected to T1 measures L3 e The transducer connected to T2 measures L2 e The transducer connected to T3 measures L1 e The transducer connected to T4 measures N Since the device assumes all wiring to be as described above any other wiring schemes will return unexpected results 2011 Racktivity NV 14 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 Installation To receive all available read outs and metrics both the transducer and its corresponding phase need to be connected and powered correctly If certain metrics are missing for a specific transducer please verify that there is an active phase for that transducer To install a current transducer e Connect the 2 ends of the current transducer cable to the correct 2 pins of the 8 pins transducer connector male using a flathead screwdriver
22. naged Slave device to monitor and manage the following parameters e Voltage o Current value historical min amp max thresholds low amp high phase shift amp frequency e Current o Current value historical min amp max thresholds low amp high THD Total Harmonic Distortion e Power o Current value historical min amp max high threshold VA apparent power amp power factor e Energy o kWh real energy amp kVAh apparent energy Note The values in the Accumulated columns cannot be reset to zero by pressing the Reset links only the values in the Resettable columns e Contacts o Current state amp active state The Status LED image displays the following statuses e Grey o Voltage current power There is no incoming voltage on this phase e Orange o Voltage current power One or more metrics on this phase is outside its threshold boundaries O 2011 Racktivity NV 25 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v2014 4 4 o Contacts The Current State does not match the Active State for this contact e Green o Voltage current power The status for this metric is OK o Contacts The Current State matches the Active State for this contact ACL Displays When one or more ACL Displays are managed by the ALC Master this tab allows you to set each Display as Display All or Display Selected e Display All When the Display All checkbox is checked all managed ACL Slaves
23. om v 2014 4 4 Quick Configuration Using the Onboard Display Activating the Display Note The ACL Display onboard display doesn t have an inactive state Whenever the device is powered the display will show the intended content When the Power LED on the ACL Master is lit and the display is black push any of the 4 navigation buttons next to the display to activate it The standby delay can be set at the Settings page on the Web Interface the default value is 10 minutes Controlling the Display The display is controlled using the MENU UP DOWN and OK buttons below the screen Use the UP and DOWN buttons to navigate through the reporting screens or through a selection list in the menu Press OK to select the highlighted item and MENU to go back 2011 Racktivity NV 20 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 Network Settings Note Only the ACL Master provides network access to the devices on the bus The ACL Slave and ACL Display cannot be managed without an ACL Master connected There are two methods for setting up the IP address Dynamic IP address assignment and Manual Assignment If you are uncertain which method to use contact your network administrator for assistance before continuing the installation process Note The ACL Master has secure HTTP HTTPS enabled by default Use https instead of http in your browser to access the web interface Dynamic
24. s This Safety Information contains important instructions that should be followed during installation and maintenance of the ACL Series equipment It is intended for Racktivity customers who set up install relocate or maintain Racktivity equipment Changes and modifications to this unit not specifically approved by Racktivity could void the warranty Electrical Hazard Read the following information before installing or operating your ACL Series equipment Do not work alone under hazardous conditions High current through conductive materials could cause severe burns Follow all local and national codes when installing the ACL Series equipment To avoid possible electrical shock and equipment damage use only the supplied hardware Do not operate your ACL Series equipment with any covers removed or when damaged There are no user serviceable parts inside the ACL Series equipment All repairs and service should be performed by authorized service personnel only The ACL Series equipment is designed for indoor use only in a controlled environment away from excess moisture temperature extremes conductive contaminants dust direct sunlight or magnetic sources Do not attempt to mount the ACL Series equipment to an insecure or unstable surface Never attempt to install electrical equipment during a thunderstorm Use of this equipment in life support applications or any medical applications is strictly prohibited since failure of this equipmen
25. suv telende eee anger en dede 17 INGE 18 LEDS zwe antennen erenaam benee nn Ge leent ANNO 18 ACL DTe eee a ee oe ae 19 QUICK CONFIGURATION rin and E oan a gaa ote en ei Sa So teen Waa Ua dae bale da seein da a be sea adan ds 20 Using the Onboard Display cccccccssssssscecececsesessaeeececeseesesseaeeeeecsseesesaeaeeeeecesseseaaeaeeeesessseseaeaeeeesees 20 Activating the Dis play tidad dile te 20 2011 Racktivity NV 2 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 Controlling the Display coccion oca etsen ER E E EEE E 20 Network Settings E E it O SE 21 Dynamic IP Address Assignment DEFAULT c cccccsssscceesssseceesssaeeecsesaeceesesaeeeceesaeeeesesaeeeeneaas 21 Manual IP Address Assignment orinn iniii EE ENE E E EEE ENRE 22 WebiInterfadO oi A a aa eee ade 23 Getting Std eden ne eee 23 Supported Web Browsers ccccceseesssececececeesesnaaecececssesseeaeeeeeesseeesaeaeeeeeceseeseaaeaeeeeecesseeaaeaeeeeeess 23 A eta dedteeee 23 O oneness eneen eneen daneen eneen eee eek See hes 24 Tabs A ek A A as geo ae eet ad eget nende hal de 25 MEA A neen een en eene eeen nS 25 EEn 25 ACL Displays tte tt nnee A TE A 26 ENVIO Murcia a Added E A 26 Setting Saien a eieaa iaeia aaa ieia aa ae liado ellas tiiis 26 BIN EAA e E E A A A E eon A 27 Network SSEEINBS EE E ee 28 SNMP Settings sit A de eend etn eveedee deals 28 A NO 29 Authentication Profile iii 29 TRAPS eres ern ii ee
26. t can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety CAUTION The ACL Master contains a lithium battery and should not be disposed of with general refuge Dispose of the lithium battery in accordance with all local codes and regulations for products containing lithium batteries Contact your local environmental control or disposal agency for further details The battery is not intended to be user replaceable 2011 Racktivity NV 8 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 Certifications Not all certifications are applicable to every model Please check the label on your device e CE FCC This device is designed in compliance with the requirements of the 4 following regulations EN 55022 Class B EN 61000 3 2 EN 6100 3 3 EN 55024 This device is certified to comply with Part 15 of the FCC rules Compliance e WEEE Waste Electrical and Electronic Equipment is R HS Restriction of Hazardous Substances O 2011 Racktivity NV 9 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 Recycling ae The materials used for shipping the ACL Series equipment are recyclable please save 8 o them for later use or dispose of them appropriately Servicing amp Repair There are no user serviceable parts inside the ACL Series equipment All repairs and service should be performed by authorized s
27. t name amp cabinet location Can be changed at the Settings tab 5 Refresh Reset Refresh or Reset button to refresh the page contents or reset all input fields 6 Scan Save Scan or Save button to scan and manage new devices or save any changes on the active page 7 Content Available content for the selected main or sub tab 8 Device time The time set on the Settings tab either manual or through an NTP server 9 Device select Device selection dropdown list only visible when appropriate O 2011 Racktivity NV 24 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 Tabs Management The management tab is used to manage the ACL Slaves and ACL Displays Each of the subtabs provides an overview of the managed devices and their current status UID unique identifier and firmware version Pressing the Locate link next to a device in the list will enhance the visibility of that device e ACL Slaves the Dry Contact LEDs will start blinking e ACL Displays the display will start blinking as of FW v3 1 To stop locating the device press the End Locate link or press any button on that device s front panel Whenever a managed device is no longer detected by the ACL Master it will be shown as Disconnected For more info on managing devices please refer to the Managing Slaves amp Displays chapter ACL Slaves The ACL Slave tab allows you to select every ma
28. to fully use the ACL Slaves and ACL Displays they need to be managed by the ACL Master 1 Make sure the ACL Slaves and ACL Displays are connected and powered correctly Please refer to the Mounting the ACL Hardware chapter for more info 2 On the ACL Master Web Interface open the Management gt ACL Slaves or ACL Displays tab 3 Press the Scan for New Modules button 4 After scanning has completed verify that the connected devices are listed in the table 5 The management table shows basic info on each device allows you to locate and or remove certain units 6 All devices listed for both ACL Slaves and ACL Displays are now available on the Web Interface of this ACL Master use the device selection dropdown list on the relevant tabs to switch devices see the Layout chapter Principles 24V Whenever Slaves or Displays are added to the R BUS and managed by the Master the addressing of that module will follow the rules below 1 New modules will get the next available unused module address 2 As long as a managed module is not explicitly removed by pressing the corresponding Remove link on its management tab or by performing a factory reset that address will remain reserved for that module Let s say you start with the following setup e Q1 managed amp connected e Q2 managed amp disconnected e D3 managed amp connected e Q4 managed amp connected Based on the 1 Principle any new module that is
29. to its power monitoring and management solution can be installed at the AC power distribution board or in distributed remote locations such as PoPs base stations and head ends The design is based on a Master Slave principle that allows you to have one access point the ACL Master for many measuring points the ACL Slaves with direct monitoring capabilities the ACL Display The ACL Masters and ACL Slaves are DIN rail mounted the ACL Displays are typically mounted in cabinet door panels Main Features e Measure AC voltage using the Slave unit o On3 phases L1 L2 L3 o Input range 100 240 VAC o Accuracy 2 e Measure AC current using the Slave unit o On4 transducers L1 L2 L3 and N o Transducer range up to 1500A depends on the current transducer used o Accuracy 2 o Calculates power W and power consumption kWh per transducer e Power supply via R BUS or mains on L1 e Monitor the measured metrics using the Display unit 2011 Racktivity NV 5 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 Applicable Models Unless specified otherwise all information in this document is applicable to the following Racktivity ACL Series model s e ACLM24 01 o The Master unit of the ACL Series e ACLS04 03 o The Slave unit of the ACL Series e ACLD24 02 o The Display unit of the ACL Series Specifications Electrical Ratings ACLM24 01 Input Voltage 24VDC ACLS04 03 Input
30. ty is always working on improving and fine tuning its products It is possible that a new firmware is available for your device During a firmware update the device continues working as normal Note Make sure all active connections to the ACL Master such as the web interface and Telnet are closed before updating Open connections might result in a failed update Obtaining Files If you are unsure whether a firmware update is available for your device have a look at http www racktivity com support or contact Racktivity Support see Support chapter If applicable the necessary files and instructions will be provided O 2011 Racktivity NV 36 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v2014 4 4 Troubleshooting Resetting Login Credentials In case of lost login credentials resetting them can be done through the navigation buttons on the ACL Master front panel e Press and hold the UP and DOWN buttons simultaneously for 3 seconds until a notification is shown on the display The credentials will now be reset to their default settings Default login credentials User name admin Password 1234 Connecting to the Web Interface If you are unable to connect to the Web Interface please try one or more of the following options e Ping the device on its IP address When unsuccessful the ACL Master is most likely not on the same network as your PC or communication is blocked by a network device e
31. ver the DIN rail and while slightly pulling the unit down e Place the bottom black slider over the bottom of the DIN rail To remove the ACL Master and or Slave use a flathead screwdriver to slightly pull the bottom black slider down This will enable you to pull the bottom of the unit forward and release it from the DIN rail ACL Display The ACL Display is typically mounted in cabinet door panels to provide an easy overview of the measured parameters e The door panel cutout required should measure 9 0 x 9 0 cm 3 543 x 3 543 inch e Mount the Display unit by sliding the device into the door panel cutout until it clicks into place To remove the ACL Display gently press the device from the back through the door panel cutout until the snap mechanism holding it in place releases 2011 Racktivity NV 12 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 Connecting the ACL Hardware The ACL Master is powered by the 2 pin 24V feed connector the polarity of the connector is marked on the label on the unit The ACL Slave amp Display units are powered through their respective R BUS connectors Additionally the ACL Slaves can also be powered through the incoming mains power on L1 Note The maximum amount of Slaves allowed on the R BUS bus of 1 Master 32 The maximum amount of Displays allowed on the R BUS bus of 1 Master 7 The power supply in the ACL Master is capable of powering the
32. will be available on the selected ACL Display e Display Selected With the Display All checkbox unchecked it is possible to select which managed ACL Slaves to be available on the selected ACL Display Environment The Environment tab shows the values and settable thresholds for the ACL Master s internal temperature sensor e Current value e Historical minimum amp maximum e Thresholds low amp high e SNMP Traps for temperature Note The temperature unit Celsius or Fahrenheit can be set on the Settings gt Device subtab Settings Use this tab to configure the following settings e Device see Device Settings chapter e Network see Network Settings chapter e SNMP see SNMP Settings chapter e Power see Power Settings chapter 2011 Racktivity NV 26 38 Antwerpsesteenweg 19 9080 Lochristi Belgium www racktivity com v 2014 4 4 Device Settings Path Settings gt Device The Device Settings give access to e Device identification o Device name the name of the device o Rack name the name of the rack cabinet where the device is located o Rack position the identifier of the position in the rack cabinet e User account settings see the User Account Overview chapter o Admin Name and password for the admin account o Restricted user Name and password for the restricted account o Guest Name and password for the guest account e System reboot o Reboot device Pressing this button will hot reset the device e D
Download Pdf Manuals
Related Search