RESCUE CUSHION LIFE JUMP 100 A
Contents
1. ala 21 LLL TESTING PROCEDURE 552 5 2585 2 98 1 0 35 ome Sus c er it 22 11 2 FABRIC CERTIFICATE FROM ITALIAN MINISTRY OF INTERIORS enn Hmm nnn 23 Via Terranova 14 I 25086 Rezzato Bs title NEIT T CIN Mail info rexue eu Web www rexue eu UM LIFE JUMP 100A __ EN _01 M TO1 del del 20 09 11 USO E MANUTENZIONE ATTENTION READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE USING THE EQUIPMENT USO E MANUTENZIONE 1 SYSTEM OF INFO AND SECURITY SIGNS GENERIC DANGER SIGN 2 IDENTIFICATION PLATE The LIFE JUMP is identified by a plate showing the ID code and technical specifications as below CUSCINO DA SALTO RESCUE CUSHION LIFE JUMP 100A ANNO DI FABBRICAZIONE YEAR OF PRODUCTION COSTRUITO PER SALTI DA 30 MT MADE TO JUMP FROM 100 FEET NON UTILIZZARE QUANDO PIOVE DO NOT USE WHEN IT RAINS MADE BY FEXUE ITALY Title 4 24 Via Terranova 14 I 25086 Rezzato Bs Mail info rexue eu Web www rexue eu UM LIFE JUMP 100A EN O1 M TO1 del 20 09 11 USO E MANUTENZIONE 3 USE AND STORAGE OF THE SERVICE MANUAL The aim of this manual is to provide instructions for the safest possible installation use and maintenance of our equipment The instructions must be followed and applied perfectly The manual is to be considered an integral part of the equipment and as such should be kept for future reference for the entire life of the product Furthermo2. USO E MANUTENZIONE 6 USE OF THE CUSHION The LIFE JUMP acts as a dissipater of the energy of a falling body The lateral overpressure outlet valves release a certain quantity of air upon impact on the surface of the cushion softening and absorbing the body without rebound The LIFE JUMP cushion must be used strictly within the specified design and production limits i e jumps from 30 meters 100 feet with an average weight of 80 Kg 785 N and a surface area of at least 0 50 m The entire absorption capacity of the LIFE JUMP takes place within 1 6 of a second thus air path and outlet valves must always be free of obstruction The LIFE JUMP is composed of 2 separate compartments chambers divided by a bulkhead The upper chamber is equipped with 4 exhaust holes that disperse the energy produced by the falling body in the most efficient way possible completely eliminating any trampoline effect The ropes can be used to regulate the airflow through the valves based on the height of the fall and the presumed weight of the person to be saved The lower chamber absorbs any excess energy of the falling body to prevent it from hitting the ground This chamber is a safety compartment with twice the absorption capacity of the upper chamber and its bottom surface is made of a more resistant material to avoid damage from usage and rubbing 6 1 INSTALLATION PROCEDURE In this part the sequence of operations for using the jumping cushion is explained
3. POSITIONING AND INFLATING PREPARATION USE USE IN TRAINING PACKING AND STORAGE OUOOU 6 1 1 POSITIONING AND INFLATING The inflated jumping cushion covers a surface of 45 6 m 6x7 60 m so it is necessary to position it carefully beforehand and verify that inflation will be possible Remove the cushion from the carrying bag then lay it out with the white surface upper chamber on top and the red surface lower chamber made of a more resistant material face down Unwind the hoses and check for any coils knots and that nothing has been placed on top of them Couple the fans to the hoses as follows FAN TYPE 630 REQUIRED POWER 1 10 kW FAN TYPE 500 REQUIRED POWER 0 55 kW Anchor the hoses to the fan s frames by means of spring clips on the hose side and the rings on the fan side and tighten the elastic strips on the edges of air hole see picture Start the fans by connecting them to a 220V source being careful to check the required installed power when using a power generator Mail info rexue eu Web www rexue eu UM LIFE JUMP 100A EN _01 Via Terranova 14 I 25086 Rezzato Bs title 24 M TO1 del M TO1 del 20 09 11 USO E MANUTENZIONE Inflation times for the two chambers FAN TYPE 630 TIME OF PROCESS 36 s FAN TYPE 500 TIME OF PROCESS 75 s 6 1 2 PREPARATION Before every jump check the cushion s position and move it if necessary using the handles visible in figure 9 Verify that the over
4. 6 1 5 of this manual 9 Fold the cushion and roll it up into its bag as per 8 6 1 5 of this manual reXue Title Revision Via Terranova 14 I 25086 Rezzato Bs STE Mail info rexue eu Web www rexue eu UM LIFE JUMP 100A __ EN _01 M TO1 del 1 del 20 09 11 USO E MANUTENZIONE 11 2 paseo nt FROM IUBET diii od Or INTERIORS REZIONE GENERALE DELLA PROTEZIONE E VISTO ii decreto ministeriale 26 giugno 1984 concernente Cizssif icazione di reazione l fuoco ed ee ai fini della prevenzione incendi VISTA l istanza pr sehtata Calla ditta F LLI GIOVANARDI di GIOVANARDI CARLO Snc sita in via Marconi 45039 ViLLIMPENTA produttrice del materiale denominato POLY PANAMA IGNIFUGO um ottenere l omologazione del materiale stesso ei fini cella prevenzione incendi Sata e VISTO il ao di reazione al fuoco r 2846 del 10 10 96 emesso per il predetto materiale dal LA P I S r l di PRATO FESTA la scheda tecnica allegata al precetto certificato prodetta dalla ditta vau GIOVANARDI ci GIOVANARDI CARLO 2 C S r c di VILLIMPENTA a SI OMOLOGA con il numero di codice MN222470CD200028 il prototipo pe materiale denominato POLY PANAMA IGNIFUGO prodotto dalla F LLI GIOVANAEDI di GTOVANARDI CARLO S n c di VILLIMPENTA ai soli fini della prevenzione incendi nella CLASSE di REAZIONE FUOCO 2 DUE e s ne AUTORIZZA la riproduzione a sensi del decret
5. able to descend unassisted without injury or shock by just sliding to the edge Once the cushion is free of weight the lateral holes will re shut and fans give pressure to both chambers allowing another jump time between jumps 30 s Le PAY ATTENTION TO THE ELECTRIC FAN S POWER SUPPLY WHEN THE CUSHION IS IN USE BECAUSE AN INTERRUPTION IN THE ELECTRIC CURRENT WILL TURN OFF THE BLOWERS AT THIS POINT AIRFLOW OUT OF THE CUSHION WILL INVERT THE FANS ROTATION SO THE CUSHION WILL DEFLATE RAPIDLY EVEN AN IMMEDIATE RETURN OF ELECTRIC CURRENT WILL NOT AUTOMATICALLY RESTART THE FAN IN THE RIGHT DIRECTION THERE ARE TWO WAYS TO RESET THE FANS DISCONNECT THE OUTLET HOSE AND WAIT UNTIL THE BLOWER FANS HAVE STOPPED RESTART THE BLOWER AND RECONNECT THE HOSE BLOCK THE AIRFLOW FROM CHAMBER SEE FIGURE 12 THEN WAIT UNTIL THE FANS STOP COMPLETELY START THE BLOWER AND RELEASE THE OUTLET FLOW DO NOT USE CUSHION IN RAIN OR STRONG WIND IN PRESENCE OF AGGRESSIVE CHEMICAL SUBSTANCES OR FOR USES THAT ARE NOT PREVIOUSLY APPROVED BY THE TECHNICAL DEPARTMENT OF MANUFACTURING COMPANY FAILURE TO RESPECT THE ABOVE WILL RESULT IN ANNULLMENT OF EVERY SORT OF GUARANTEE AND ALL LIABILITY AND RESPONSABILITY WILL AUTOMATICALLY CONSIDERED ON OPERATOR S CHARGE Mail info rexue eu Web www rexue eu UM LIFE JUMP 100A EN _01 M TO1 del del 20 09 11 Via Terranova 14 I 25086 Rezzato Bs mee 24 USO E MANUTENZI
6. kind resulting from use correct or otherwise or any partial or total defects in the equipment Shipping of the goods is at the consignee s risk Any damage sustained during transport must be contested with the shipping agent upon receipt The Manufacturer is deemed wholly exempt of any direct or indirect liabilities in the following conditions a b C d e f g h reXue improper use of the LIFE JUMP use of the equipment by unskilled people use contrary to other applicable local norms serious deficiencies in maintenance unauthorised interventions or modifications use of non original or non specific spare parts whole or partial failure to follow instructions unusual events Title Revision 5 24 Via Terranova 14 I 25086 Rezzato Bs Mail info rexue eu Web www rexue eu UM_LIFE JUMP 100A E N O1 1 M TO1 del 20 09 11 USO E MANUTENZIONE 5 DESCRIPTION OF EQUIPMENT LIFE JUMP consists of HELICAL FAN TYPE 500 HELICAL FAN TYPE 630 LIFE JUMP CUSHION CARRYING BAG REPAIR AND ANCHORAGE KIT OUOOU 5 1 HELICAL FANS TYPE 500 ABOVE AND 630 BELOW A characteristic of the helical fans is that they are crossed axially by the airflow in a direct crossing pattern The technical characteristics of the fans are given in the fans own manuals as supplied with the LIFE JUMP FRONT PROTECTION RINGS TO FIX GRILL REAR OUTPUT HOSES _ PROTECTION GRILL TYPE 500 FAN A POWER CABLE TYPE
7. rexue eu UM LIFE JUMP 100A __ EN _01 M TO1 del del 20 09 11 Via Terranova 14 I 25086 Rezzato Bs Lite USO E MANUTENZIONE 7 6 7 6 3 SCHEDULED MAINTENANCE PROGRAM MONTHLY CHECKS Prepare and inflate the cushion Leave cushion in pressure for 15 minutes minimum Verify seams and welds of cushion while in pressure Check electric cables and plugs Fold cushion as instructed on page 14 of this manual avoiding unnecessary folds and check that the cushion is not damp SIX MONTHLY CHECKS Prepare and inflate the cushion Leave cushion in pressure for 30 minutes minimum Verify seams and welds of cushion while in pressure Check electric cables and plugs Fold cushion as instructed on page 14 of this manual avoiding unnecessary folds and check that the cushion is not damp BIENNAL TEST OF RESISTANCE After two years use we advise carrying out the following resistance test drop a weight of about 80 Kg with a surface of at least 0 20 m from a greater height than the declared one 21 meters Repeat this operation at least 3 times AFTER EVERY USE CHECK THAT THE OUTLET TUBES AND THE VENTILATOR GRILLS ARE FREE OF OBSTRUCTIONS 7 6 4 CHECKING THE INNER RODS During the 6 monthly check 7 6 2 verify the condition of the internal tension straps of the lower chamber reXue Mail info rexue eu Web www rexue eu UM LIFE JUMP 100A EN _01 Prepare and inf
8. 500 FAN B reXue Title Revision N Via Terranova 14 I 25086 Rezzato Bs Mail Web www rexue eu UM LIFE JUMP 100A EN _01 1 0 M T01 del del 20 09 11 USO E MANUTENZIONE 5 2 AIR JUMP CUSHION The air jump cushion consists in a lower chamber an upper chamber with overpressure outlet valves and two air hoses All component parts have been sewn and welded to allow an easy and prompt use of the device w id JEUDI VOL a pn 4 m i boe LOWER SAFETY CHAMBER LABEL TO IDENTIFY PRODUCT ODUCTION 2001 Todo ra FROM 100 USE WHEN IT RAINS ITAL LOWER CHAMBER S HOSE OVERPRESSURE OUTLET VALVE t Via Terranova 14 I 25086 Rezzato Bs title 7 24 Mail info rexue eu Web www rexue eu UM LIFE JUMP 100A E N O 1 1 n 0 M T01 del 20 09 11 USO E MANUTENZIONE 5 3 WEIGHTS DIMENSIONS AND TECHNICAL FEATURES TYPE 630 FAN UPPER CHAMBER TOTAL PRESSURE 164 Pa INTERNAL LOSS OF CHARGE 47 Pa USEFUL STATICS PRESSURE 117 Pa T 15 C INSTALLED POWER 1 1 KW 4 pole 230 V 50 Hz STROKES 1435 g m ABSORPTION GEARS HEATING RESISTANCE FRAME GEAR S PROTECTION ACOUSTIC PRESSURE TYPE 500 FAN DIMENSIONS 650 x 650 x 280 mm LOWER CHAMBER WEIGHT 30 kg Galvanized holder plate Grill in steel wire UNI 9219 DIN 31001 65 dB ISO 3744 TOTAL PRESSURE INTERNAL LOSS OF CHARGE USEFUL STATICS PRESSURE INSTALLE
9. A EN O1 1 M TO1 del 20 09 11 R USO MANUTENZIONE Folding the cushion requires two people and must be carried out in the following sequence Fig 18 Roll up pipes Fig 19 Canvas storage reXue Revision Via Terranova 14 I 25086 Rezzato Bs 14 24 Mail info rexue eu Web www rexue eu LIFE JUMP 100A EN O1 1 01 20 09 11 USO E MANUTENZIONE FOLD AND ROLL CUSHION IN ITS CARRY BAG THEN STORE IN A DRY PLACE AWAY FROM DIRECT SUNLIGHT READY FOR NEXT OPERATION 6 2 RESIDUAL RISKS Due to the highly specific nature of the LIFE JUMP s use and application it is essential that operators be authorised properly trained and are familiar with the contents of this manual As previously repeated in other chapters by its nature the cushion will be used in emergency conditions and in difficult circumstances This means that immediate and rapid deployment of the equipment will be necessary The assigned operators must be prepared and instructed regarding potential residual risks that may result not so much from any characteristics of the equipment or its component parts or from their specific functions but from purely behavioural conditions dependant on the operators manner of working Hence the operator is exposed to these residual risks i e to dangers that cannot be totally eliminated either at the planning design level or by using protection Possible residual risks d
10. D POWER 0 55 kW 4 poles 230 V 50 Hz STROKES ABSORPTION GEARS HEATING RESISTANCE FRAME GEAR S PROTECTION Grill in steel wire UNI 9219 DIN 31001 ACOUSTIC PRESSURE 68 dB ISO 3744 JUMPING CUSHION Inflated cushion s dimensions 6 x 7 60 x 2 75 H m Useful surface 45 6 m Volume of deflated cushion 1 5 m fans excluded Weight 230 kg Material Coated polyester PVC BOTTOM Warp 4000 N 5 cm Weft 3500 N 5 cm Warp 600 N Weft 500 N 30 C 70 C COMPONENTS Breaking Strength EN ISO 1421 1998 Tear Strength DIN 53363 2003 Working Temperature SIDE amp REST Warp 2500 N 5 cm Weft 2300 N 5 cm Warp 250 N Weft 200 N 30 C 70 C Warp 3000 N 5 cm Weft 2800 N 5 cm Warp 300 N Weft 280 N 30 C 70 C DIN EN 1876 2 1998 M2 NFP 92507 2004 M2 NFP 92507 2004 ADR Class II UNI 8456 UNI 9174 Light Fastness 7 8 7 8 7 8 Except white and Except white and semi Except white and semi semi transparent transparent transparent All stitching on the LIFE JUMP cushion is made of yarn with a polyester core and cotton cover 80 polyester 20 cotton Holding strength o 10 850 g elongation Ap p 25 5 tensile strength 44 5 g TEX Welding is performed by ultrasonic min 12 kW BOTH FANS ARE SUPPLIED WITH 15 m EXTENSION CABLES Via Terranova 14 I 25086 Rezzato Bs Title 8 24 Mail info rexue eu Web www rexue eu UM LIFE JUMP 100A E 1 1 0 M T01 del 20 09 11
11. ECTIVE LIFESPAN AND CAN ALSO RESULT IN MALFUNCTIONS AND DAMAGE TO COMPONENTS WHICH MAY HAVE SERIOUS CONSEQUENCES FAILURE TO COMPLY TO MAINTENANCE NORMS WILL ALSO INVALIDATE THE WARRANTY Only skilled operators who have not only read this manual but have also been sufficiently trained in the correct use of the LIFE JUMP must carry out maintenance For reasons of safety and reliability worn or damaged parts must always be replaced DURING MAINTENANCE OPERATIONS SUCH AS ASSEMBLY AND DISASSEMBLY THE OPERATOR MUST WEAR SUITABLE D P I GARMENTS GLOVES GLASSES SAFETY SHOES ETC The user is responsible for maintenance and periodic checks and these should be carried out according to the instructions in this manual and at the indicated intervals or even more frequently in special cases 7 2 LIFE JUMP CUSHION SET UP FOR MAINTENANCE OPERATIONS The responsible operator in a closed clean place that meets with the current safety norms must carry out the maintenance operations The LIFE JUMP must be put OUT OF USE by turning off the engines and suitable tools used 7 3 STANDARD MAINTENANCE Periodically check the suction and outlet grills as well as the seams of the cushion 7 4 SPECIAL MAINTENANCE A specialised technician from the manufacturer s service network should carry out a complete check up annually 7 5 WAREHOUSE STORAGE The device must be stored in a safe place away from excess light and humidity Mail info rexue eu Web www
12. ONE 6 1 4 USE IN TRAINING When used in training as well as following all standard procedures a height limit of 4m is to be observed Although the cushions have been tested for jumps from 21m this lower height corresponding to 1 floor of the training building or drill tower must be respected in training Furthermore the correct position must be assumed legs forward and head back and the personnel must be trained and in suitable physical condition These precautions are determined by the fact that the cushion is per se a piece of rescue equipment to be used in extreme conditions where the lack of any alternative would result in serious injury or certain death Regarding this the manufacturer cannot accept responsibility for any accidents which occur during training as a result of jumps from more than 4m jumps carried out incorrectly or jumps carried out by unsuitable personnel DURING TRAINING OPERATIONS NEVER JUMP FROM HEIGHTS OVER 4 METERS AND LAND ONLY IN SQUARED OFF POSITION THE MANUFACTURER DECLINES ANY KIND OF LIABILITY FOR JUMPS CARRIED OUT NOT ACCORDING TO THE PRESENT INDICATIONS 6 1 5 PACKING AND STORAGE When rescue operations are finished disconnect the fans and deflate the cushion till flat manually helping the deflation from both chambers and the outlet valves figure 13 I t FIG 13 Terranova 14 1 25086 Rezzato Bs mee 13 24 Mail info rexue eu Web www rexue eu UM_LIFE JUMP 100
13. USO E MANUTENZIONE RESCUE CUSHION LIFE JUMP 100 A Mail info rexue eu Web www rexue eu UM LIFE JUMP 100A __ EN _01 M TO1 del 1 del 20 09 11 Via Terranova 14 I 25086 Rezzato Bs title USO E MANUTENZIONE INDEX INDEX 2 1 SYSTEM OF INFO AND SECURITY SIGNS nzununuhuuRRRuRuRuRRRRRRRRRRRRRSRRSSSRERRRRSRRERRRRAS 4 2 IDENTIFICATION PLATE s2sisass3d uS uu uuu EE E EN EN FEE ED ME EE 4 3 USE AND STORAGE OF THE SERVICE MANUAL ccccccccocooooooooonanananauanuanans 5 4 WARRANTY AND EXPIRY OF LIABILITY cccoeoooonenaneaaaaoanaaanaoonnanaaaaaannnnnnus 5 5 DESCRIPTION OF EQUIPMENT i 6 5 1 HELICAL FANS TYPE 500 ABOVE AND 500 BELOW RR nnm x 3h e mn ra rns 6 5 2 ATR JUMP US MION u uu u u uuu uma aaa 7 5 3 WEIGHTS DIMENSIONS AND TECHNICAL seusauveuseeueuueeussursuveauuseuseunss 8 6 USE OF THE CUSHION uu u u n ia a 9 6 1 INSTALLATION PROCEDURE lente 9 6 1 1 POSITIONING AND INFLATING i 9 6 1 2 PREPARATION n n n n UEM Kt E EU 10 di bere 11 614 ENTRO a 13 6 1 5 AND STORAGE i 13 6 2 RESIDBAERIS ri ta asqa 15 7 MAINTENANCE INSTRUCTIONS ccccccccccoecoecooeoooanaaanooonanan
14. VON WO Ro la W FRONT PROTECTION GRILL VENTILATOR CACTNG Mail info rexue eu Web www rexue eu UM LIFE JUMP 100A EN _01 Via Terranova 14 1 25086 Rezzato Bs mee K 24 M T01 del 1 del 20 09 11 USO E MANUTENZIONE 11 ATTACHMENTS ATTACHMENT TESTING PROCEDURE FIREPROOF CERTIFICATION FOR FABRICS USE amp MANITENANCE CD USE amp MANITENANCE MANUAL FOR FANS CE CERTIFICATION OF FANS Mail info rexue eu Web www rexue eu UM LIFE JUMP 100A EN _01 Via Terranova 14 I 25086 Rezzato Bs mee M T01 del 1 del 20 09 11 USO E MANUTENZIONE 11 1 TESTING PROCEDURE TESTING PROCEDURE JUMPING CUSHION LIFE JUMP 70 A 1 Prepare an empty working area of 13 5 m the cushion occupies 3 m x 4 50 m 2 Place the cushion on the ground and unfold it from the cover 3 Place the fans in position UPPER CHAMBER WHITE FAN TYPE 500 REQUIRED POWER 0 55 Kw LOWER CHAMBER RED FAN TYPE 500 REQUIRED POWER 20 55 Kw 4 Fix the input tubes to the fans 5 Turn on the fans UPPER CHAMBER WHITE FAN TYPE 500 TIME OF PROCESS 36 s LOWER CHAMBER RED FAN TYPE 500 TIME OF PROCESS 75 s 6 Check the valve are clear to enable excess air to be expelled 7 Follow the procedure for training use especially gt Maximum drop height 21 m gt Use a weight of 80 kg with a silhouette greater than 0 5 m gt Drop onto centre of cushion 8 Deflate the cushion as per 8
15. aaaanannannnanannnnnaannnuus 16 7 1 INTRODUCTION sense ei pin 16 7 2 LIFE JUMP CUSHION SET UP FOR MAINTENANCE OPERATIONS rr 16 7 3 SIANDARD MAINTENANCE leleine aeree 16 7 4 SPECIAL MAINTENANCE RICE 16 Tid WAREHOUSE STORAGE sella fa 16 7 6 SCHEDULED MAINTENANCE PROGRAM 17 7 6 1 MONTHLY CHECKS nn ass ass ss asr 17 7 6 2 SIX MONTHLY CHECKS i 17 7 6 3 BIENNAL TEST OF RESISTANCE nn sn nn ann rrr 17 7 6 4 CHECKING THE INNER RODS eee emheeee nn nn nsn nn 17 8 TROUBLE SHOOTING ossei x RE SR u ER RR Mu Ru RP RD a Ja Rr Ea 18 9 DISMOUNTING AND REMOUNTING OF THE PARTS OF THE CUSHION 19 9 1 INTRODUCTION MTM E 19 9 2 DISMOUNTING OF CUSHION S PARTS ER ae i 19 9 3 TECHNICAL SUPPORT CENTRE dn aud S aus addo abet ud ui pari e Od Danse dors 19 10 SECTION DRAWINGS FOR SPARE 20 10 1 SECTION DRAWING OF He mnm hne nk enema aua rara nnn 20 11 ATTACHMENTS uuu uuu RENE ELEM ANE
16. eriving from the use of LIFE JUMP may be particularly present during the following operative phases Lifting and moving the cushion assembly Nearness to the cushion assembly during a jump The operators in charge must wear proper Individual protective devices depending on the specific operational situation Italian Law 626 94 and amendments or foreign equivalents AS PREVIOUSLY DESCRIBED IN THE PROCEDURES FOR INSTALLATION AND USE THE LIFE JUMP IS A RESCUE DEVICE THAT FOR EVIDENT REASONS CANNOT IN ANY WAY GUARANTEE THE SAVING OF A LIFE WITH EVERY SINGLE JUMP THIS IS BECAUSE PEOPLE IN DANGER IS PRONE TO PANIC AND JUMPS MADE IN AN INCORRECT POSITION CAN CAUSE FRACTURES OR INJURIES THAT IN EXTREME CASES MAY PROVE FATAL FOR THIS REASON WE RECOMMEND DURING TRAINING OF EMERGENCY PERSONNEL THAT NO JUMPS EXCEED THE RECOMMENDED HEIGHT AND ARE ALWAYS MADE IN THE SQUARED OFF POSITION THE LIFE JUMP IS INTENDED TO OFFER A LAST CHANCE OF SALVATION IN EMERGENCY SITUATIONS WHERE THE ALTERNATIVE WOULD BE CERTAIN DEATH JUMPING FROM A HEIGHT OF 21 m AND IT MUST i BE VIEWED IN THIS PROSPECTIVE Mail info rexue eu Web www rexue eu UM LIFE JUMP 100A __ EN _01 M TO1 del del 20 09 11 Via Terranova 14 I 25086 Rezzato Bs Lite USO E MANUTENZIONE 7 MAINTENANCE INSTRUCTIONS 7 1 INTRODUCTION FAILURE TO RESPECT THE NORMS AND MAINTENANCE SCHEDULING WILL JEOPARDIZE OPTIMAL PERFORMANCE OF THE LIFE JUMP ITS EFF
17. hese are the instructions an operator who has been adequately trained must follow in order to take the LIFE JUMP apart in a suitable environment and subsequently re assemble it 9 2 DISMOUNTING OF CUSHION S PARTS Only trained authorised personnel must carry out the maintenance procedures described in the previous chapters Such stages must be carried out with LIFE JUMP in a state of OUT OF USE 9 3 TECHNICAL SUPPORT CENTRE These instructions only cover standard repairs special repairs must be carried out only by the manufacturer s own technical staff To request a visit please contact the technical service centre giving the data relative to the specific LIFE JUMP ATTENTION FAILURE TO COMPLY WITH THESE INSTRUCTIONS WILL INVALIDATE THE WARRANTY FOR INFO REGARDING THE TECHNICAL SERVICE CENTRE Rosenfire S r l Via Bormioli 3 I 25135 Brescia Bs Tel 39 030 2548566 Fax 39 030 2548420 Via Terranova 14 I 25086 Rezzato Bs Lite aan Mail info rexue eu Web www rexue eu UM LIFE JUMP 100A __ EN _01 M TO1 del del 20 09 11 USO E MANUTENZIONE 10 SECTION DRAWINGS FOR SPARE PARTS 10 1 SECTION DRAWING OF VENTILATOR A T T petu Se preside rs Ow wow AY e m TARRE qe La Hr lt 4 Py aM ed O VY gt S M N A fre 1 A gt gt PE TET R art IS potet bo A lt
18. late the cushion Two operators must release the outlet hose from the lower chamber and a third person must go inside the chamber passing through the tube itself Re attach the connection to the fan to keep the chamber in pressure Check the condition of the tension straps M TO1 del del 20 09 11 Via Terranova 14 I 25086 Rezzato Bs mee 24 USO E MANUTENZIONE 8 TROUBLE SHOOTING The following is a list of the main faults with the relative causes and solutions that may be found during use of the LIFE JUMP cushion using this the operator can promptly identify the faults and equally promptly act act to solve them FAULT REMEDY i No electricity Check the plugs and the mains The engines don t start Not enough power There must be at least 2 0 Kw Noise coming from fan Possible foreign items inside the fan casing CX ISI pus pelis WIEN compressed air The fan is sucking instead The blower has been turned off and the turn off the fan and repeat assembling of blowing rotation of the fan has reversed operations READ THE INSTRUCTION AND MAINTENANCE MANUALS OF THE FANS FOR FURTHER PROBLEMS ARISING DURING THEIR USE reXue i Title 18 24 ia Terranova 14 I 25086 Rezzato Bs Mail info rexue eu Web www rexue eu UM_LIFE JUMP 100A EN O01 1 M TO1 del 20 09 11 USO E MANUTENZIONE 9 DISMOUNTING AND REMOUNTING OF THE PARTS OF THE CUSHION 9 1 INTRODUCTION T
19. o ministeriale citato in premessa conformemente tutte le caratteristiche apparenti e non apparenti nonch quelle dichiarate dalle predette ditta nella scheda tecnica parinenti citata in premessa Sui marchio o sulla dichiarazione di conformit de allegarsi ac ogni vines di fornitura Gel materiale oggetto csila presente omologazione dovranno essere riscriazi NOME DEL PRODUTTORE Ditta F LLI GIOVANARDI cdi GIOVANARDI CA2L0 k C c altro segno cistintive ANNO DI z2ZODUZIONE in icarsi CLASSE DI REAZIONE AL FUOCO 2 DUE CODICE MN2Z22A70CD22CO025 EN 5052250 5105651 3 DI FSENDSERE FUOCC SU AiMSO0 LE ZsGSZ IMPISSO TENDONE AN a Monona DUOALLEGACO x J o AL D S 26 6 1082 Gi ricsismeno eli coblich 2 agge spa cantl el produsse a wives Agter Compas 22352275 nora vodice Civile colica 730813 cel decreto ministerials 28 giugno 1984 gt 347 Casc 212 soll 212 s L ISPETTORE GEMESS F JAFN a Neon SES Tucxlcg CENCSI S Da si carne sc i REST quem uL DO FESSO alla DESSOS NETTA SCA INTEGIAL STESURA PA reXue Revision Via Terranova 14 I 25086 Rezzato Bs mee 23 24 Mail info rexue eu Web www rexue eu UM_LIFE JUMP 100A EN O1 1 01 20 09 11
20. pressure outlet valves of the upper chamber the white one are clear and appear as in figure 8 The tie bolts of the valves must not be in tension as air flow must be easy in order to wholly absorb the weight of the falling body Verify that the outlet valves are not obstructed there must be a corridor of at least 50 cm around the full perimeter of the cushion If necessary fix the cushion to the ground using supplied pegs and lateral handles Title 10 24 Via Terranova 14 I 25086 Rezzato Bs Mail info rexue eu Web www rexue eu UM LIFE JUMP 100A EN 01 1 M T01 del 20 09 11 USO E MANUTENZIONE 6 1 3 USE After positioning the cushion and checking the set up the jump operation may begin It is very important in an emergency situation to instruct people in danger about the correct way to fall Only one person may jump at a time and between jumps about 30 seconds must be allowed for the upper chamber to have time to fully inflate reXue Via Terranova 14 I 25086 Rezzato Bs Title 11 24 Mail info rexue eu Web www rexue eu UM LIFE JUMP 100A EN O1 1 M TO1 del 20 09 11 USO E MANUTENZIONE As shown in figure 10 the jump has to occur in square position with the legs forward and torso upright As soon as the person lands on the LIFE JUMP cushion the system of lateral outlet valves disperses the dropping body s energy figure 11 allowing a smooth landing without rebounding The person is
21. re these recommendations do not represent the only procedures to maintain safety any operation performed on moving parts and or in the presence of electrical current such as installation or maintenance demands particular attention and this can only be given by qualified personnel that have been suitably trained In following the instructions for the use of the jump cushion compliance to all local directives laws and norms must also be assured a b C d e f g THE TERM QUALIFIED PERSONNEL IS DEFINED AS PERSONNEL WHO HAVE SPECIFIC TECHNICAL COMPETENCE IN THE FIELD OF AERAULIC AND ELECTRIC COMPONENTS FOR INDUSTRIAL PURPOSES WARRANTY AND EXPIRY OF LIABILITY Rosenfire products have 12 months warranty from delivery date The manufacturer agrees to repair and or replace within the warranty period any parts suffering from factory defects on condition that the declared defect is first confirmed by their personnel The manufacturer s decision in this matter is incontestable Transport and labour costs are not included in the guarantee and may be accepted by the Manufacturer only after written request for quote and the Manufacturer s written approval The guarantee is not valid in cases of normal wear careless operation bad maintenance or incorrect use The assembly of any non original parts onto the equipment will void the guarantee The Manufacturer will not accept responsibility for any costs losses or damage of any
Download Pdf Manuals
Related Search