NEC PowerMate ES SlimLine Series User's Manual
Contents
1. 409 00065 000 4 19 00 3 01 PM Page 1 PowerMate ES SlimLine Series System Board Configuration Jumper Settings Keyboard Factory setting Wakes up the system from Wakeup OCO Suspend to RAM mode via the keyboard 3 2 1 Requires Windows 98 running in Advanced Configuration Power Interface ACPI mode Normal operation 3 2 1 Disables Keyboard Wakeup Onboard C00 Audio 12 3 Factory setting Enables onboard audio Disables onboard audio Use this 7 2 3 Setting if you install a sound card 5 CMOS o 3 Factory setting Maintains system board Clear O 2 configuration in CMOS RAM C with onboard battery JBAT1 Ol 3 Clears CMOS while system power is off o 2 Return jumper to pins 1 and 2 before 1 powering system on Caution To prevent damage to the system board avoid clearing CMOS while power is on BIOS 5 Factory setting Sets the system for Recovery 5 3 normal operation The BIOS uses current configuration information and passwords at power on To enable BIOS recovery for a corrupted system remove the jumper Wait 10 seconds Replace the jumper on pins 1 and 2 5 5 Restores Safe BIOS settings as the 1 23 default BIOS settings and loads the BIOS Setup at power on J23 J23 CPU Gl3 Factory sett2. ing ola Uses a Cyrix CPU Type Q 2 Uses an Intel CPU fo2 O 1 ial Save to w4 Factory setting Enables the RAM O Save to RAM function JP4 OO Disables the Save to RAM function Website www nec computers com Technical Support 800 632 4525 A WARNING Turn off and unplug the system unit before adding options or changing jumper settings Note See your PowerMate ES SlimLine Series User s Guide for detailed option installation information Memory Upgrade m Maximum memory supported 512 MB minimum memory required 32 MB m Memory type and size can vary between sockets E System supports 168 pin 100 MHz non ECC SDRAM modules in 32 MB 64 MB 128 MB and 256 MB configurations Use NEC memory upgrade kits for the best compatibility with your system For memory compatibility information call Technical Support E Single or double sided DIMMS are supported m No jumper setting required Processor Upgrade See your user s guide for detailed processor upgrade information Primary IDE Connector JP4 JKBV1 Secondary Jumper IDE Connector J4 Jumper Jumper J23 Memory JBAT1 Processor Socket YUMPer Upgrade Jumper Socket 370 Sockets NEC 409 00065 000
Download Pdf Manuals
Related Search