PIXMA iP6600D SERVICE MANUAL - Wiki Karat
Contents
1. Ink tank not installed The following ink tank cannot be Install the applicable ink tank s properly and confirm that the LED s of all the ink tanks light ze print head temperature The type of print head is sensor error 1403 incorrect Install the correct print faulty EEPROM data of Ineag the print head 1405 Inner cover open Inner cover is open Close the Close the inner cover and press 1 5 inner cover and press OK 1841 Inner cover open during printing on paper 1846 Inner cover open during printing on paper print continuable 1851 Inner cover open during printing on paper print NOT continuable 1856 Inner cover closed during CD DVD printing print continuable 1850 Open the inner cover place the CD R tray and press OK Inner cover closed during CD DVD printing print NOT continuable 1855 Multiple ink tanks of Applicable ink tank icon the same color installed ore than one ink tank of the 1681 following color is installed Ink tank in a wrong Some ink cartridges are not Install the ink tank s in the position 1680 installed in place correct position The waste ink absorber is almost Press the Stop Reset button full Press OK to continue but early replacement recommended Warning The waste ink absorber becomes almost full 1700 See manual The connected digital Incompatible device detected camera or digital vide2. 2 Customer Maintenance 1 a Approx Adjustment Timing Purpose Tool und Print head At print head replacement To ensure accurate dot Printer buttons 3 min alignment placement automatic manual Computer automatic settings via the printer driver Print head When print quality is not To improve nozzle conditions Printer buttons cleaning satisfying Computer settings via the printer driver Print head deep When print quality is not To improve nozzle conditions Printer buttons satisfying and not improved by Computer settings print head cleaning via the printer driver Ink tank When an ink tank becomes 2 min replacement empty No ink error Paper feed roller When paper does not feed To clean the paper feed Printer buttons 2 min cleaning properly rollers CD DVD print At CD DVD printing when To correct CD DVD print Computer application 5 min iti position software To clean the platen ribs Printer buttons 1 min Computer settings via the printer driver LCD contrast When the LCD contrast is not To set the desirable contrast Printer buttons 1 min adjustment desirable ASF sub roller When the paper fed from the To clean the ASF sub rollers Plain paper 1 min cleaning ASF is smeared due to ink mist Printer buttons attached to the ASF sub rollers paper feed roller cleaning 1 3 Product Life 1 Printer Specified print volume I or the years
3. Replace the ink tank s a ieee ae ee is open P the cover ps l the access cover 1200 1 Only for models supporting CD DVD printing 2 Only for models not supporting CD DVD printing 2 2 Service Call Errors by Cyclic Blinking in Orange Alarm LED and Green Power LED or Alarm LED Lit in Orange Service call errors are indicated by the number of cycles the Alarm and Power LEDs blink and the corresponding error code is displayed on the LCD Cycles of blinking in orange Alarm LED and green Power LED 2 times Error Error code Carriage error 5100 signal 3 times Line feed error 6000 An error occurred in the carriage encoder An error occurred in the line feed signal Conditions 1 7 Solution Replacement of listed parts which are likely to be faulty Carriage unit QM2 2298 Timing slit strip film QC1 6394 Logic board ass y QM2 2745 Carriage motor QK1 1500 Timing sensor unit QM2 2683 Timing slit disk film QC1 6229 Feed roller ass y QL2 0925 Platen unit QM2 2313 4 times Purge cam sensor error An error occurred in the purge unit 5C00 5 times ASF cam sensor error This error takes place when feeding paper 5700 from the ASF after an error occurred in the ASF cam sensor 6 times Internal temperature error The internal temperature is not proper 5400 7 times Waste ink absorber full The waste ink abso
4. When A4 or LTR is selected for Paper Size plain paper is selectable for Paper Type With plain paper selected for Paper Type printing is done with borders even when borderless printing is selected To the table of contents To the top Part 3 4 Print Media Specifications 3 21
5. gt g wW c N S a 4 3 ga E a i e s 5 a gt Bw BG D as lt a a e ge Adapter required 3 18 1 Only for CD DVD printing supported regions lt Print head gt Single head with 6 removable ink tanks each color Print head Dye based BK C M Y PC PM 512 x 6 nozzles 1 200 dpi 1 pl 5 pl C PC M PM 5 pl BK Y Dye based black cyan magenta yellow photo cyan photo magenta CLI 8BK C M Y PC PM dye based Print head approx 55g Supply method As a service part not including ink tanks Supported ink tanks BCI BCI BCI BCI BCI BCI CLI CLI CLI CLI CLI CLI Model name and 7eBK 7eC 7eM 7eY 7ePC 7ePM 8BK sc 8M 8Y 8PC 8PM destination Dye based ink PIXUS vo e o o o oop etx x x J x PIXMA O Usable X Not usable Note The ink tanks for the Japanese models are not compatible with those for the non Japanese models Be sure to use the appropriate ink tanks in servicing To the table of contents To the top lt Part 3 3 PIXMA iP6600D Specifications gt 3 19 4 PRINT MEDIA SPECIFICATIONS lt Plain paper specialty paper gt The following types of paper are recommended nn ASF stacking Camera Card Print Type Name Size BR capacity Direct Direct Beam auto max Printing Printing Printin
6. Logic board ass y QM2 2745 Ink absorber kit QY 5 0147 Print head QY 6 0063 Logic board ass y QM2 2745 Logic board ass y QM2 2745 PR lift shaft ass y QL2 0936 Sheet feed unit QM2 2312 Logic board ass y QM2 2745 Carriage lift sensor unit QM2 2678 Sheet feed unit QM2 2312 Logic board ass y QM2 2745 Purge unit QM2 2208 Sheet feed unit QM2 2312 Logic board ass y QM2 2745 Sheet feed unit QM2 2312 Logic board ass y QM2 2745 Logic board ass y QM2 2745 Logic board ass y QM2 2745 Purge unit QM2 2208 Logic board ass y QM2 2745 Platen unit QM2 2313 Logic board ass y QM2 2745 Logic board ass y QM2 2745 Logic board ass y QM2 alternate MO jac at hard power on 2745 blinking m error The RAM error occurred in the RAM check at Logic board ass y QM2 LED Pe ee 2745 i 1 Before replacement of the logic board ass y check the waste ink amount by service test print or EEPROM information print If the waste ink amount is 7 or more also replace the ink absorber kit QY5 0147 when replacing the logic board ass y See Section 3 3 Adjustment Settings 5 Service mode for details 2 3 Other Error Messages Cannot print via wireless The received image data was invalid or The error message is displayed for a communication the data
7. Perform the print head alignment in the user mode LCD viewer unit Button and LCD test in QM2 2305 the service mode Panel board ass y QM2 2747 1 General notes Make sure that the flexible cables and wires in the harness are in the proper position and connected correctly See 3 2 Special Notes on Repair Servicing 2 Flexible cable and harness wiring connection for details Do not drop the ferrite core which may cause damage Protect electrical parts from damage due to static electricity Before removing a unit after removing the power cord allow the printer to sit for approx minute for capacitor discharging to protect the logic board ass y from damages Do not touch the timing slit strip film and timing slit disk film No grease or abrasion is allowed Protect the units from soiled with ink Protect the housing from scratches Exercise caution with the red screws as follows i The red screws of the paper feed motor may be loosened only at replacement of the paper feed motor unit DO NOT loosen them in other cases ii DO NOT loosen the red screws on both sides of the main chassis securing the carriage shaft positioning they are not adjustable in servicing To the table of contents To the top Part 1 3 REPAIR 3 1 gt 3 2 Special Notes on Repair Servicing 1 External cover removal D Open the access cover and release the hooks on the left and right side o
8. borderless Standard print quality Throughput Process from pressing the printing start button to ejecting paper i Mobile phone equipped with IrDA 1 2 port or with Bluetooth 1 2 port phone when the optional BU 20 is attached to the printer I un un un g e oO o 3 az 3 a 3 3 o 3 o o a amp a a 2 o o a o a e 3 si amp S E EIS 2 5 Bi S o Printable data mage JPEG only text printing not possible Print Beam printing i See 4 PRINT MEDIA SPECIFICATIONS paper 1 2 4 8 images per page borderless 1 2 4 5 6 7 8 9 16 images per page bordered un S 3 a a a ge d 3 Standard range communication devices or radio wave conditions requeney band B Communication Approx 720kbps speed IP OPP SPP HCRP Windows XP Service Pack 2 or later Windows XP Service Pack 1 or later Microsoft Support for Bluetooth Wireless Devices or Toshiba Bluetooth Stack for Windows Ver 3 00 10 or later has to be installed Mac OS X 10 3 3 or later 18 5 W x 47 5 D x 8 7 H mm with a cap BU 20 weight Approx 7g 4 4 to 5 25V supply voltage 500mW max i 5C to 35C 41F to 95F rati 10 RHto 90 RH no condensation un zz o m i S 3 o a o e lt o e upported profile communication optional W E N a a s E a e B o P 2 o un m DO 3 o lt a M S uU d N ES H o
9. cleaned with cotton swab paper gets smeared Paper is scratched Marks appear on printed paper the auto sheet feeder manually print each side of When multiple i PR 101 SG 101 sheets of paper are i Print etc set the back side o S IE results Paper feeding from Paper being picked the ASF up scratches the front side of paper Multiple number of beneath especially sheets loaded where the paper feed rollers contact when picking up the paper Soiling on paper The printer has been Due to ink mist Clean the ASF sub used for a long attached to the ASF rollers see 3 for period of time with sub pick up rollers details the ASF cover If printing is done closed before from the cassette printing is with the ASF cover performed using the closed ink mist is ASF kept inside the printer attaching to 7 WC results p i Since the sub paper ink mist can easily accumulate especially during printing on small sized paper which never contacts the sub rollers Skewed paper SG 101 When 10 sheets of i Paper feeds at feeding paper are set in the an angle ASF and s a Aminen warp significantly Print 10 sheets max ns MNA paper in appears on results set in the ASF portions of paper printouts get over the cover guide not being Paper feeding from the ASF aligned along the guide properly Change the paper in each Bottom plate cleaning The clean
10. of use II whichever comes first I Print volume 10 000 pages Black 1 500 character pattern 2 000 pages A4 7 5 duty per color pattern 1 500 pages A4 photo borderless printing 1 500 pages 4 x 6 photo borderless printing 4 500 pages Postcard photo borderless printing 500 pages II Years of use 5 years of use 1 2 z Print nead Print volume 10 000 pages pla 1 500 character pattern 2 000 pages Color 44 7 5 duty per color pattern 1 500 pages A4 photo borderless printing 1 500 pages 4 x 6 photo borderless printing 4 500 pages Postcard photo borderless printing 500 pages 3 Ink tank target value Pattern Ink tank used Print yield LI 8BK Approx 480 pages Color chart CLI 8BK Approx 970 pages sy Approx 460 pages LES Approx 520 pages LI 8C Approx 760 pages Photo chart LI 8BK Approx 1 500 pages LI 8Y Approx 320 pages LI 8M Approx 670pages Lamm Approx 140 pages Dro Approx 200 pages Black text When printing the Canon standard pattern 1 500 characters per page on A4 size plain paper with the default settings in the Windows XP driver using Word 2003 Color chart When printing the ISO JIS SCID N5 pattern on A4 size plain paper in bordered printing with the default settings in the Windows XP driver using Photoshop 7 0 Photo chart When printing the Canon standard pattern on 4 x 6 Photo Paper Plus Glossy in borderless printing with the default set
11. only after the print head deep cleaning is performed 2 times and when the problem persists To the table of contents To the top Part 1 2 LIST OF ERROR DISPLAY INDICATION gt 1 12 3 REPAIR 3 1 Notes on Service Part Replacement and Disassembling Reassembling board ass y remove the power cord and allow for approx minute for discharge of capacitor s accumulated charges to prevent damages to the logic board ass y Before replacement check the waste ink amount by service test print or EEPROM information print If the waste ink amount is 7 or more also replace the ink absorber kit when replacing the logic board ass y See 3 3 Adjustment Settings 5 Service mode for details Ink absorber kit QY5 0147 Paper feed motor QK1 1502 The red screws securing the paper feed motor are allowed to be loosened DO NOT loosen any other red screws Initialize the EEPROM Reset the waste ink counter Set the destination in the EEPROM Correct the CD DVD and automatic print head alignment sensors 5 Check the ink system function See 3 3 Adjustment Settings 5 Service mode for details of 1 to 5 6 Perform the print head alignment in the user mode After replacement 1 Reset the waste ink counter See 3 3 Adjustment Settings 5 Service mode At replacement 1 Apply grease to the sliding portion
12. service test print and confirm that no strange noise or faulty print operation due to dislocation of the belt or gear or out of phase motor etc occurs Note The red screws securing the paper feed motor may be loosened only at replacement of the paper feed motor unit DO NOT loosen them in other cases 2 Grease application 1 Printer unit 1 21 Number of No Part name Where to apply grease oil Grease oil name Es rr B sabecot Joganonste amount drops apply grease oil 1 Chassis ass y D Entire surface the carriage slider contacts 27to 54 mg 3 1 2 Chassis ass y 2 PR lift shaft cam contact portion at 3 locations 9 to 18 mg 1 3 3 Adjust plate L Carriage shaft cam L sliding portion Flol KG107A 18 to 36 mg 2 1 4 Chassis ass y Carriage shaft sliding portion on the left side of the chassis Flol KG107A 9 to 18 mg 1 2 at 2 locations 5 Chassis ass y B Carriage shaft sliding portion on the right side of the Flo KG107A 9 to 18 mg 1 2 chassis at 2 locations 6 Carriage shaft Entire surface of the carriage shaft where the carriage unit FloiKG107A 200 to 400 mg 1 slides 7 Carriage shaft spring L CD Carriage shaft sliding portion to the end of the spring Flol KG107A 9 to 18 mg 1 1 8 Adjust plate R Cariage shaft cam R sliding portion 18 to 36 mg 2 1 9 Carriage shaft Carriage shaft surface where the carriage slides and FloiKG107A 9 to 18 mg 1 1 where mac
13. size was too large in infrared while then the LCD automatically No photo data communication from a mobile phone returns to the display before the error occurrence Unsupported photo data Photo data too large The selected paper cannot be fed The paper type being used is not Change the paper source to the ASF from cassette Change the paper supported for paper feeding from the source cassette Business Card Credit Card size paper and Photo Stickers are not supported Cannot specify the followings Settings made conflict each other The error message is displayed for a together Change one of the while then the LCD automatically settings returns to the display before the error occurrence There are no photos in memory Supported image files are not in the The error message is displayed for a card memory card while then disappears The value exceeds the number of During selecting images or specifying After the error message is displayed for a copies you can print the number of copies the total print while the last operation before the error quantity exceeds the prescribed value of lis cancelled and the total print quantity 999 returns to the value before the error Memory card is not set Insert the No memory card is inserted in the slot Set a memory card card after checking the direction DPOF information is not saved in DPOF print was selected in the menu The error message is displaye
14. the AC adapter or logic board ass y Remove foreign material Attach a removed part if any Check the operation of the moving parts such as purge unit carriage unit and paper feeding mechanism Replace a faulty part if any Confirm the connection between the operation panel and the logic board Replace the LCD or logic board ass y Perform the button and LCD test in the service mode and confirm that the LCD is displayed without any segments missing Confirm the connection between the operation panel and the logic board Replace the LCD or logic board ass y Examine the inside to confirm that no parts are damaged and the rollers are clean Remove foreign material Adjust the paper guide properly Confirm the connection of each harness and the logic board Replace the sheet feeder unit cassette or logic board ass y Confirm that the timing slit strip film is free from damage or grease Clean the timing slit strip film Replace the timing slit strip film or carriage unit Remove foreign material Replace the ink tank print head or logic board ass y Remove foreign material from the purge unit caps if any Replace the purge unit Printing is faint or white lines Remove and re install the print head appear on printouts even after print _ Replace the h leaning sni c saning ne Line s not included i
15. 200 CALIPCIPM 600 x 600 To the table of contents To the top Part 2 3 PRINT MODE gt 4 FAQ Problems Specific to the iP6600D and Corrective Actions 1 Print results Skewed paper feeding Paper feeding from the cassette Photo Paper Plus Double Sided 5 x 7 size Paper feeding from the ASF Plain paper Improper paper feeding Multi feeding Highest print speed Skewed paper Custom setting to feeding temperature and high humidity environment In the low temperature and low humidity environment With the maximum amount of paper set 13 mm Skewed paper feeding at the level of 1 Paper feeding from the ASF Credit Card size After continuous borderless printing of small sized paper such as 4 x 6 when a larger sized paper such Soiling on the back side of paper lines or streaks parallel to the paper feed direction Due to its mechanism contact ofthe PF pinch rollers to the 5 x 7 size paper is uneven which is likely to cause temperature and high humidity environment paper becomes wavy in the low temperature and low humidity environment paper curls significantly When the maximum amount of paper is set in the ASF and if the paper return tab fits in a wave or curl ofthe paper the tab slips and does not catch paper properly causing paper feed problems Since coaxial tolerance between the pinch ro
16. Double Sided postcards plain paper PP 101D PP 101 PR 101 SG 101 etc Paper feeding from the cassette paper is absorbed by the platen s ink absorber Absorbed ink may attach to the platen rib s after several dozen sheets are printed causing soiling at the sheet feed unit used for duplex printing ink mist may accumulate smearing paper Scratches on the PF return lever due to paper feeding from the cassette and duplex printing path 2 8 2 If soiling on the paper still remains after 3 times of Bottom plate cleaning wipe the platen rib s and their surroundings with a cotton swab Cancel automatic duplex printing and manually print each side of paper Cleaning by user 1 Perform Bottom plate cleaning from the printer driver up to 3 times If soiling on the paper still remains after 3 times of Bottom plate cleaning wipe the platen rib s and their surroundings with a cotton swab If the phenomenon persists after conducting and 2 Wipe any soiling or dirt off from the sheet feed unit and the bottom case unit ribs Change the paper feeding method from the cassette to the auto sheet feeder If automatic duplex printing is performed cancel it and by setting only a single sheet of paper in Paper gets smeared The back side of paper gets smeared Even after Bottom plate cleaning was performed and the platen ribs were
17. OM information print See 3 3 Adjustment Settings 5 Service mode for details 4 User mode Function Procedures Remarks Print head manual cleaning See Standalone printer operation below Also available from the printer driver Maintenance tab Print head deep cleaning See Standalone printer operation below Also available from the printer driver Maintenance tab Paper feed roller cleaning See Standalone printer operation below 7 7 Nozzle check pattern See Standalone printer operation below printing Also available from the printer driver Maintenance tab Automatic manual print See Standalone printer operation below In Custom Settings of the printer head alignment Also available from the printer driver driver Maintenance tab manual Maintenance tab print head alignment by selecting the optimum values as with the conventional models can be performed Bottom plate cleaning See Standalone printer operation below Cleaning of the platen ribs Also available from the printer driver when the back side of paper Maintenance tab gets smeared Print head replacement The print head is replaceable at the same position as for ink tank replacement Open the access cover When the carriage stops at the center the print head can be replaced lt Standalone printer operation 1 With the printer turned on press the Menu button Select Maintenance Settings proceed to Maint
18. PIXMA P6600D SERVICE MANUAL canon Copyright 2005 Canon U S A This technical publication is the proprietary and confidential information of Canon U S A which Shall be retained for reference purposes by Authorized Service Facilities of Canon U S A Its unauthorized use is prohibited product When changes are made to the contents of the manual Canon will release technical information when necessary When substantial changes are made to the contents of the manual Canon will issue a revised edition The following do not apply if they do not conform to the laws and regulations of the region where the manual or product is used Trademarks Product and brand names appearing in this manual are registered trademarks or trademarks of the respective holders Copyright All rights reserved No parts of this manual may be reproduced in any form or by any means or translated into another language without the written permission of Canon Inc except in the case of internal business use Copyright 2005 by Canon Inc CANON INC Inkjet Device Quality Assurance Div 2 451 Tsukagoshi 3 chome Saiwai ku Kawasaki shi Kanagawa 212 8530 Japan I MANUAL OUTLINE This manual consists of the following three parts to provide information necessary to service the PIXMA iP6600D Part 1 Maintenance Information on maintenance and troubleshooting of the PIXMA iP6600D Part 2 Technical Reference New technology and technical information such
19. Print quali IMP 101 Resolution HxV dpi Print control Ink used Photo Paper Plus Double Sided PP 101D Print quality Resolution Hx dpi Print control Ink used Resolution HxV dpi Print control Ink used Print quality Resolution HxV dpi Print control Ink used Print quality Resolution HxV dpi Print control Ink used T shirt transfer TR 301 Print quality Resolution HxV dpi Print control Ink used Print quality Resolution HxV dpi Print control CD R other Print quality Resolution HxV dpi Print control Ink used 3 2 Resolution in Borderless Printing 2 5 Printer driver Custom setting Print quality Resolution HxV dpi Print control Ink used Photo Paper Pro Print quality High PR 101 olution HxV dpi k Y 600 x 1200 CAM PC PM 600 x 2400 k Y 9600 x 1200 C M PC PM 9600 x 2400 Print control 8 passes Bi directional 16 passes Bi directional CIM YAKIPCIPM CIMIYIKIPCIPM Photo Paper Plus Glossy Px i High Photo Paper Plus Semi gloss Xf 600 x 1200 CIM PC PM 600 x 2400 PP 101 SG 101 i 8 passes Bi directional CIM YAKIPCIPM Matte Photo Paper int quality High IMP 101 Resolution HxV dpi KT 600 x 1200 C M PC PM 600 x 600 Print control 8 passes Bi directional Ink used CIMIYIXIPCIPM Glossy Photo Paper Print quality High GP 401 501 Reso
20. R SP SG 00000 GP 00000 PC 00000 EV 00000 23 UCPAGE AII 00004 PP 00004 HR MP 00000 PR SP SG 00000 GP 00000 PC 00000 EV 00000 24 BPPAGE AII 00013 BSSP 00000 PC 00000 25 CDPAGE AII 00000 26 EDGE 00000 27 L 00000 28 CDR 00000 29 CDRP 00005 00029 30 CDRS 079 31 LF 0 32 LM ASF_R 00 UT_F 00 UT_R 00 33 Head Temp 35 0 34 Env Temp 31 5 35 FF 98 15 07 36 OPP 00000 37 BTPAGE 00030 38 PrnB 00000 39 Seal 00000 40 CardPaper 00000 41 CardIns 0001 42 CardPrn 0000 43 CDD PR L 000 2L 000 PC 000 A4 000 44 CDD SP L 000 2L 000 PC 000 A4 000 45 CDD MP L 000 2L 000 PC 000 A4 000 46 DCD PP L 000 2L 000 PC 000 A4 000 47 DCD FPP L 000 2L 000 PC 000 A4 000 48 DCD MPP L 000 2L 000 PC 000 A4 000 HDEEPROM 1 V0000 2 SN 0000 046E 3 LN 00000 00000 00000 00003 00013 00017 00015 4 ID 11 5 IL PBK 000 C 000 C2 000 PC 000 PC2 000 PM 000 PM2 000 M 000 M2 000 Y 000 Printed items 1 Model name 2 ROM version 3 Connected I F USB2 4 Waste ink amount 5 Installation date 6 Operator call service call error record 7 Last printing time 8 Purging count manual deep cleaning timer dot count ink tank and print head replacement 9 Cleaning time 10 Print head replacement count 11 Ink tank replacement count PBK C PC PM M Y 12 Ink status PBK C PC PM M Y 13 Power on count soft 14 Automatic print head alignment by user 14 1 Manual print head alignment by user 15 User print head alignment valu
21. as FAQ s Frequently Asked Questions of the PIXMA iP6600D Part 3 Appendix Block diagrams and pin layouts of the PIXMA iP6600D Reference This manual does not provide sufficient information for disassembly and reassembly procedures Refer to the graphics in the separate Parts Catalog gt II TABLE OF CONTENTS Part 1 MAINTENANCE 1 MAINTENANCE 1 1 Adjustment Periodic Maintenance Periodic Replacement Parts and Replacement Consumables by Service Engineer 1 2 Customer Maintenance 1 3 Product Life 1 4 Special Tools 1 5 Serial Number Location 2 LIST OF ERROR DISPLAY INDICATION 2 1 Operator Call Errors 2 2 Service Call Errors 2 3 Other Error Messages 2 4 Warnings 2 5 Troubleshooting by Symptom 3 REPAIR 3 1 Notes on Service Part Replacement and Disassembling Reassembling 3 2 Special Notes on Repair Servicing 3 3 Adjustment Settings 1 Paper feed motor adjustment 2 Grease application 3 Waste ink counter setting 4 User mode 5 Service mode Service test print EEPROM initialization Waste ink counter reset Destination settings Button and LCD test 3 4 Verification Items 1 Service test print 2 EEPROM information print 4 PRINTER TRANSPORTATION Part 2 TECHNICAL REFERENCE 1 NEW TECHNOLOGIES 2 CLEANING MODE AND AMOUNT OF INK PURGED 3 PRINT MODE 3 1 Resolution in Print
22. ct print pages 43 Card Direct print pages Photo Paper Pro 4 x 6 5 x 7 Japanese post card Letter 44 Card Direct print pages Photo Paper Plus Glossy 4 x 6 5 x 7 Japanese post card Letter 45 Card Direct print pages Matte Photo Paper 4 x 6 5 x 7 Japanese post card Letter 46 Camera Direct print pages Photo Paper 4 x 6 5 x 7 Japanese post card Letter 47 Camera Direct print pages Fast Photo Paper 4 x 6 5 x 7 Japanese post card Letter 48 Camera Direct print pages Matte Photo Paper 4 x 6 5 x 7 Japanese post card Letter HDEEPROM 1 Version 2 Serial number 3 Lot number 4 Print head ID 5 Ink ejection level PBK C C2 PC PC2 PM PM2 M M2 Y To the table of contents To the top lt Part 1 3 REPAIR 34 gt 1 31 4 PRINTER TRANSPORTATION This section describes the procedures for transporting the printer for returning after repair etc 1 In the service mode press the Power button to finish the mode and confirm that the paper lifting plate of the sheet feed unit is raised 2 Keep the print head and ink tanks installed in the carriage See Caution 1 below 3 Turn off the printer to securely lock the carriage in the home position When the printer is turned off the carriage is automatically locked in place See Caution 2 below Caution 1 If the print head is removed from the printer and left alone by itself ink is likely to dry For this reason keep the print head
23. d for a but no DPOF files are contained in the while then the LCD automatically memory card returns to the display before the error occurrence The number of copies to printis Multi photo print was attempted without The error message is displayed for a not set Input the number of copies specifying the print quantity with the while then disappears Specify the print print quantity left 0 zero quantity This layout is available only for In Layout print Mixed 1 2 or 3 which The error message is displayed for a A4 or 8 5 x11 LTR is available only with A4 or LTR size while then the LCD automatically paper is selected but the paper size is not returns to the display before the error set to A4 or LTR occurrence Settings cannot be changed when With Sticker print selected the Settings The error message is displayed for a printing stickers button was pressed while then the LCD automatically returns to the display before the error occurrence Change the setting after removing With a memory card inserted in the slot The error message is displayed for a the card change of the Read Write attribute was while then the LCD automatically attempted returns to the display before the error occurrence The card is currently write With the memory card set to the The error message is displayed for a enabled Set to read only mode Read Write mode Card Direct printing while then the LCD automatica
24. detection sensor At carriage unit replacement the CD DVD detection sensor Automatically light volume performed in the correction service test print Ink system At logic board replacement To maintain detection None function check At platen unit replacement functionality for presence of the At carriage unit replacement ink tanks and each ink tank position Perform in the service mode Paper feed At paper feed motor To adjust the belt tension motor position replacement Position the paper feed motor so adjustment that the belt is stretched tight Grease At carriage unit replacement To maintain sliding properties FLOIL KG application At PR shaft ass y replacement of the carriage shaft and the lift 107A QY9 At CL base or CL gear cam shaft 0057 replacement To protect the printer s sliding portions gears Note DO NOT loosen the red screws at both ends of the carriage shaft securing the print head position as they are not re adjustable Only for CD DVD printing supported regions 2 The red screws securing the paper feed motor may be loosened only at replacement of the paper feed motor unit 2 Periodic maintenance No periodic maintenance is necessary 3 Periodic replacement parts There are no parts in this printer that require periodic replacement by a service engineer 4 Replacement consumables 1 1 There are no consumables that require replacement by a service engineer
25. ection The results shall be OK 1 28 lt Service test print sample gt 004DB FA 97 15 98 D 00 OK K 021 C 36D PC 01B MIO PM 021 M i iP6600D JPN Vo OMS AB K OK K 3B9 C 920 PM OK PC 021 Pogy m 7 CDR 00268 00482 LE bis PC OK C 022 PC 3A9 M 024 4 Be 2 Y O Check2 EEPROM information 3 Check3 Nozzle check pattern VRR V 272777277222 AAA M M AA AAA A A A A A A AA A R gt Check5 Checkp te line feeding gt gt i CDR SENSOR OK Check CD DVD sensor and automatic print head alignment sensor correction 2 EEPROM information print lt How to read EEPROM information print gt Print sample 1 29 1 iP6600D JPN 2 V1 02 3 IF USB2 1 4 D 004 9 5 ST 2005 06 27 18 30 6 ER ERO 1000 ER1 5100 7 LPT 2005 07 04 09 09 8 PC M 002 R 000 T 001 D 009 C 009 9 CLT 2005 07 04 18 30 10 CH 00002 11 CT PBK 001 C 002 PC 001 PM 001 M 001 Y 001 12 IS PBK 1 C 0 PC 0 PM 0 M 0 Y 0 13 P ON S 00029 14 A REG 1 M REG 0 15 UR A PBKoe 000 B C SC 000 C M SM 000 D PC SPC 000 E PM SPM 000 F CLbi 001 G SCLbi 000 H CLbiPP 000 I SCLbiPP 000 J NZedge 000 16 LG 01Japanese 17 WP 0024 18 CDIN LG 001 PB 000 OPB 000 19 BTIN 1 20 MSD 015 21 TPAGE 00040 22 PAGE AII 00023 PP 00023 HR MP 00000 P
26. edures below initialize the EEPROM Button and LCD test See Service mode operation procedures below Note At the end of the service mode press the Power button To protect the media sensor from being dislocated during transportation the paper lifting plate of the sheet feeder unit will be raised lt Service mode operation procedures gt 1 With the printer power turned off while pressing the Stop Reset button press and hold the Power button DO NOT release the buttons The Power LED lights in green to indicate that a function is selectable 2 While holding the Power button release the Stop Reset button DO NOT release the Power button 3 While holding the Power button press the Stop Reset button 2 times and then release both the Power and Stop Reset buttons Each time the Stop Reset button is pressed the Alarm and Power LEDs light alternately Alarm in orange and Power in green starting with Alarm LED 4 When the Power LED lights in green press the Stop Reset button the specified number of time s according to the function listed in the table below Each time the Stop Reset button is pressed the Alarm and Power LEDs light alternately Alarm in orange and Power in green starting with Alarm LED 0 times Green Power Power off When the print head is not installed the carriage returns and locks in the home position capped 1 time Orange Alarm Service test print See 3 4 Verification Items 1 Service test pr
27. enance or Device Settings then select a desired operation N Nozzle check pattern printing Set a sheet of plain paper A4 or letter in the ASF or the cassette according to the Feed Switch button setting LLL O Automatic manual print head Set a sheet of plain paper A4 or letter in the ASF alignment MEM 1 24 Bottom plate cleaning Fold a sheet of plain paper A4 or letter in half crosswise then unfold and set it in the ASF with the folded ridge facing down 1 5 Service mode Function Procedures Remarks Service test print See Service mode operation Set a sheet of A4 or letter size paper Model name procedures below For print sample see 3 4 Verification Destination Items 1 Service test print lt Service test ROM version print sample gt USB serial number Waste ink amount CD DVD sensor correction value Ink system function check result CD DVD sensor correction result EEPROM initialization See Service mode operation The following items are NOT initialized procedures below and the shipment arrival flag is not on USB serial number Destination settings Waste ink counter CD DVD correction value Waste ink counter reset See Service mode operation If the waste ink amount is 7 or more procedures below replace the ink absorber kit Destination settings See Service mode operation After destination settings make sure to 8 p 8 proc
28. ents To the top Part 2 1 NEW TECHNOLOGIES gt 2 CLEANING MODE AND AMOUNT OF INK PURGED To prevent printing problems due to bubbles dust or ink clogging print head cleaning is performed before the start of printing when the cleaning flag is on except in the following cases Cleaning on arrival Performed when the access cover is closed Manual cleaning deep cleaning Performed manually lt Cleaning mode list gt Amount of ink used Est required time g sec Condition Details in the normal not including the temperature humidity time of opening environment the caps On arrival of the First to second cleaning after shipped 2 696 printer from the plant Each color separately Dot count cleaning When the specified number of dots are 0 810 Each color printed since the previous cleaning separately Timer cleaning 1 If 120 to 336 hours have elapsed since the previous cleaning till the start of the next printing 0 810 Each color separately Timer cleaning 2 If 336 to 720 hours have elapsed since the 1 346 Each color previous cleaning till the start of the next separately printing Timer cleaning 3 If 720 to 1 080 hours have elapsed since Each color the previous cleaning till the start of the separately next printing Timer cleaning 4 If 1 080 to1 440 hours have elapsed since Each color the previous cleaning till the start of the separa
29. es PBKoe C SC M SM PC SPC PM SPM CLbi SCLbi CLbiPP SCLbiPP NZedge 16 Language 17 Wiping count 18 Camera Direct Print supported device connection record Canon legacy Canon PictBridge Competitor PictBridge 19 Bluetooth supported device connection record 20 Longest period where printing stops 21 Total feed pages 22 ASF feed pages total plain paper High Resolution Paper amp Matte Photo Paper Photo Paper Pro amp Photo Paper Plus Glossy amp Photo Paper Plus Semi gloss Glossy Photo Paper Postcard Envelope 23 U turn cassette feed pages total plain paper High Resolution Paper amp Matte Photo Paper Photo Paper Pro amp Photo Paper Plus Glossy amp Photo Paper Plus Semi gloss Glossy Photo Paper postcard envelope 1 30 24 Auto duplex print pages total Photo Paper Plus Double Sided postcard 25 Camera Direct print pages total 26 Borderless print pages 27 4x6 print pages 28 Number of CDs and DVDs printed 29 CD DVD print position adjustment value 30 CD DVD sensor correction value 31 LF correction value 0 1 2 32 Left margin correction value ASF back side U turn front side U turn back side 33 Print head temperature 34 Inside temperature 35 Line inspection information 36 Other Photo Paper 37 Feed pages via Bluetooth connection 38 Print Beam feed pages 39 Sticker sheets fed 40 Business card amp Credit card sized paper pages fed 41 Memory card use count total 42 Total Card Dire
30. f the printer indicated by the blue circles to remove the side covers II Remove the screws at 2 locations and the flexible cable at 1 location III Release the hooks and remove the front left cover as shown below IV Release the 2 hooks on the rear side of the printer indicated by the blue circles V Release the hook on the left side of the printer then while inserting the flat blade screwdriver in the slots on the left and right sides of the printer front release the hooks to remove the main case from the bottom case 1 17 2 Flexible cable and harness wiring connection Be careful of wiring of the flexible cables and harness Improper wiring or connection may cause breakage of a line leading to ignition or emission of smoke EN ID u n D Front cover right unit and logic board ass y wiring 1 18 SSSSSSSSSSSE SSS SSS SSeS eee eee eee umuumuuuuuuu eee eee dnu RMM M L L LANA I A 1 19 II Paper feed motor side wiring To the table of contents To the top Part 1 3 REPAIR 3 2 gt 1 20 3 3 Adjustment Settings 1 Paper feed motor adjustment Perform the following adjustments when the paper feed motor unit is replaced 1 When attaching the motor fasten the screws so that the belt is properly stretched in the direction indicated by the blue arrow in the figure below 2 After replacement be sure to perform the
31. g Plain paper 64t0 105 A4 B5 LTR ASF 13 mm Yes Yes Yes g m AS LGL Cassette Super White Paper SW A4 LTR ASF 13mm 101 201 Cassette High Resolution HR 101 A4 B5 LTR ASF Approx 80 Paper Cassette sheets Glossy Photo GP 401 A4 LTR ASF 10 sheets Yes Yes Yes Paper Cassette GP 401 4x6 101 6 x 152 4 ASF 20 sheets Yes Yes Yes mm Cassette GP 401 54 x 86 mm ASF 20 sheets Yes Yes Credit Card GP 501 A4 LTR ASF 10 sheets Yes Yes Yes Cassette GP 501 4x6 101 6 x 152 4 ASF 20 sheets Yes Yes Yes mm Cassette Photo Paper Pro ASF 10 sheets Yes Cassette PR 101 4x6 101 6 x 152 4 ASF 20 sheets Yes Cassette PR 101 4x8 ASF 20 sheets Cassette Photo Paper Plus ASF 10 sheets Glossy Cassette PP 101 4x6 101 6x 152 4 ASF 20 sheets mm Cassette PP 101 5x7 127x 178 mm ASF 10 sheets Cassette Matte Photo Paper ASF 10 sheets Yes Cassette MP 101 4x6 101 6 x 152 4 ASF 20 sheets Yes Cassette Photo Paper Plus ASF 10 sheets Semi gloss Cassette SG 101 4x6 ASF 20 sheets Cassette Photo Paper Plus PP 101D ASF 10 sheets Double Sided Cassette PP 101D 127 x 178 mm ASF 10 sheets 5x7 Cassette Transparency CF 102 A4 LTR ASF 30 sheets Cassette 3 20 T shirt transfer TR 301 A4 ASF 1 sheet Cassette COM 10 241 x 105 mm ASF 10 5 Cassette envelopes DL size 220 x 110 mm ASF 10 5 Cassette envelopes ASF only for LGL 2
32. g will resume from on the front side of the next page Press the Stop Reset button If paper is being fed at error occurrence the error is indicated after the paper is ejected If the error occurs the print head alignment values are not changed After exit from the error by the Stop Reset button the automatic print head alignment will not be re done occurrence is skipped not printed The error is indicated when the pattern is not printed due to no ink or non ejection of ink or when the sensor s AD value is incorrect 1 6 The remaining ink Applicable ink tank icon amount unknown 1683 The remaining level of the following ink cannot be correctly detected Ink tank not recognized Applicable ink tank icon The following ink tank cannot be An ink tank which has once been Printing with a once empty is installed Replace the applicable ink tank with a new one A non supported ink tank is installed the ink tank LED is empty or refilled ink tank can damage the print head If printing is continued without replacing the no good ink tank press the Stop Reset button for 5 sec or longer to record the use of a refilled ink tank Note After the above operation the function to detect the remaining ink amount is disabled turned off Install the supported ink tanks An error occurred in an ink tank The following ink tank cannot be the ink tank LED is turned off
33. hine application of the grease is not feasible 1 drop 2 9 to 18 mg aus re WU vee 2 CL input gear Number of Grease oil Number of locations to amount drops apply grease oil 10 CL input gear Joint of the CL gear base Floil KG107A 9 to 18 mg 1 drop 9 to 18 mg No Part name Where to apply grease oil Grease oil name 1 22 3 PR shaft LF roller bushing Number of No Part name Where to apply grease oil Grease oil name Grease soll Nuinberot lotationsto amount drops apply grease oi H18 11 LF roller ass y 12 PR shaft ass y 13 PR shaft ass y LF roller bushing L spring contact Floil KG107A 4 5 to 9 mg KB PR spring sliding portion at 4 locations Floil KG107A ete ODA PR holder contact at 4 locations Floil KG107A 1 5 1 drop 9 to 18 mg To the table of contents To the top Part 1 3 REPAIR 3 3 1 to 2 gt gt 1 23 3 Waste ink counter setting When the logic board ass y is replaced reset the waste ink counter In addition according to the waste ink amount replace the waste ink absorber ink absorber kit The standard amount for waste ink absorber replacement is given in the table below Waste ink amount Ink absorber kit replacement p ue Check the waste ink amount by service test print or EEPR
34. ieved 4 New functionality in Direct Printing Plain paper is now usable in Camera Direct Printing from a digital camera or digital video camera if both support PictBridge File numbers can be printed on the images Red eye correction Picks up a red area from an image detects and corrects the red eye s Optimization of photos taken with a mobile phone Minimizes jaggies in printing a low resolution photo taken with a mobile phone Writing to a memory card From the Maintenance settings menu the memory card can be set to the Read only or Read Write mode CD DVD printing Direct Printing from a memory card on a CD or DVD is available in CD DVD printing supported regions only Slide show To the Single photo print menu the slide show function has been added to display photos from the memory card one by one automatically 5 3 5 color LCD The 3 5 color LCD is installed and the operation panel is on the top center offering the same operability as that of Canon multifunction printers 6 USB 2 0 Hi Speed supported The printer supports USB 2 0 Hi Speed enabling high speed data transfer in use with the computer OS and USB hub 7 Printing via Bluetooth communication optional The Bluetooth Unit BU 20 is available as an option Adopting a compatible USB adapter the BU 20 when attached to the printer enables wireless printing from a Bluetooth compliant computer or mobile phone 2 1 To the table of cont
35. imes or j Orange Alarm Return to the menu selection fs Note After setting the destination be sure to initialize the EEPROM The destination setting may not be valid unless the EEPROM is initialized after destination settings Confirm the model name and destination in service test print or EEPROM information print 1 26 See 3 4 Verification Items 1 Service test print or 2 EEPROM information print lt Button and LCD test procedures gt Purpose To confirm the operation after replacement of the operation panel unit logic board or LCD Procedures 1 Press the Stop Reset button The LCD self test is done If an error occurs the Alarm LED lights Only the Power button is valid and the printer is in the service mode menu selection status 2 Press each button on the operation panel except the Power OK and Stop Reset buttons 15 buttons 3 If2 or more buttons are pressed at the same time only 1 button is accepted The LCD is divided into 15 blue segments representing each button The color of a segment corresponding to the pressed button changes to red 4 When all the buttons excluding the Power OK and Stop Reset buttons are pressed the entire LCD changes to a full red screen Open the access cover to display the color pattern If any one ofthe keys is not pressed a blue segment is left pressing the Stop Reset button is not accepted nothing occurs 5 Press the Power button to return
36. ing can end when paper does not get any soiling 2 Locations to clean in servicing when soiling on paper in automatic duplex printing persists 2 9 BOTTOM CASE UNIT 3 How to prepare and set the ASF sub roller cleaning sheet 1 Fold a sheet of plain paper lengthwise in half 2 Fold the paper at approx 60 mm from the end and fold the folded end in half backward as shown below 2 10 3 Moisten the folded end portion indicated by the blue circle in the figure below using a wipe and set the paper in the ASF so that the moistened edge of the paper contacts the 2 sub rollers Then fold the other end ofthe paper along the ASF cover edge to hook the paper to the ASF cover as shown below 4 Press and hold the Stop Reset button until the Power LED blinks 3 times then release the button to perform the paper feed roller cleaning See Standalone printer operation for details Occurrence level A The symptom is likely to occur frequently Caution required B The symptom may occur under certain conditions but likeliness is assumed very low in practical usage C The symptom is unlikely to be recognized by the user and no practical issues are assumed 2 11 To the table of contents To the top Part 2 4 FAQ gt gt Part 3 APPENDIX 3 PIXMA iP6600D SPECIFICATIONS lt Printer gt me 1 Desktop serial color bubble jet printer Paper feeding method Auto sheet feed ASF cassette a
37. ing via Computer 3 2 Resolution in Borderless Printing 3 3 Resolution in Duplex Printing 3 4 Resolution in Camera Direct Printing 3 5 Resolution in Card Direct Printing 4 FAQ Problems Specific to the iP6600D and Corrective Actions Part 3 APPENDIX 1 BLOCK DIAGRAM 2 CONNECTOR LOCATION AND PIN LAYOUT 2 1 Logic Board Ass y 2 2 Print Beam Board 2 3 Card Slot Board Card Slot Unit 2 4 Operation Panel Board 2 5 Carriage Board Print Head Connector 3 PIXMA iP6600D SPECIFICATIONS 4 PRINT MEDIA SPECIFICATIONS Part 1 MAINTENANCE 1 MAINTENANCE 1 1 Adjustment Periodic Maintenance Periodic Replacement Parts and Replacement Consumables by Service Engineer 1 Adjustment Asien mo o ome ow IN EEPROM At logic board ass y replacement To initialize settings other than None 1 min initialization the following EEPROM USB serial number settings Destination setting Waste ink counter CD DVD correction value Destination At logic board ass y replacement To set the destination None settings EEPROM settings LCD en At ee board ass y replacement To set the oo to be p Bur min EUM een on the LCD At logic board replacement To reset the waste ink counter None At waste ink absorber Perform in the replacement service mode Perform in the service mode CD DVD At logic board replacement To correct the light volume for None
38. installed in the printer even during transportation 2 Securely lock the carriage in the home position to prevent the carriage from moving and applying stress to the carriage flexible cable or causing ink leakage during transportation Memo If the print head must be removed from the printer and transported alone perform the following 1 Attach the protective cap used when the packing was opened to the print head to protect the print head face from damage due to shocks To the table of contents Part 1 4 PRINTER TRANSPORTATION gt To the top 1 32 Part 2 TECHNICAL REFERENCE 1 NEW TECHNOLOGIES 1 New ink tank system CLI 8 An LED is installed in each ink tank By the LED indication wrong installation of the ink tanks will be prevented and the remaining ink level can be visually recognized with the ink tanks seated in the carriage 2 Super photo quality printing By the FINE technologies 1 pl of ultra fine ink droplet is adopted The iP6600D provides excellent super photo print quality without graininess at the maximum resolution of 9 600 dpi x 2 400 dpi which surpasses that of a traditional 6 color printer Printing at the minimum distance of 1 9600 inch between the dots 3 Speed Approx 46 sec in 4 x 6 borderless printing standard mode PP 101 Full Page SCID No 2 For reference High speed printing at 18 ppm in monochrome printing and 17 ppm in color printing have been ach
39. int 2 times Green Power EEPROM information See 3 4 Verification Items 2 EEPROM 1 25 print information print Orange Alarm EEPROM initialization J 4 times Green Power Waste ink counter resetting 5 times Orange Alarm After entering the destination settings mode press the Stop Reset button the specified number of time s to select the destination For detail see Destination settings procedures below P Print h Green Power FOU USED Cleaning of both black and color cleaning 8 times Green Power CD DVD check pattern print 9 times Orange Alarm CD DVD print Not used in servicing position correction horizontal X direction 10 times Green Power CD DVD print Not used in servicing position correction vertical Y direction 11 times Orange Alarm Button and LCD test 12 and 13 Green Orange Return to the menu times Power Alarm selection 15 times or Orange Alarm Return to the menu more selection Note If the Stop Reset button is pressed 15 or more times the Alarm or Power LED lights steadily without any changes Destination settings 6 times HE Destination settings procedures In the destination settings mode press the Stop Reset button the specified number of time s according to the destination listed in the table below and press the Power button omes Green Poven Fo crane orie seseo t
40. ller and the LF roller which determines paper feeding can occur However according to the field data of current models the skewness level caused by the coaxial tolerance o 0 2mm is within the criteria of 1 thus the phenomenon is left as is In borderless printing printing is performed to the size slightly larger than the paper size and ink off the 2 7 Possible call or Corrective action complaint Paper feeds at an angle from the cassette to the auto sheet feeder A margin appears on printouts Reduce the amount of paper set in the ASF to half approx 5 mm high Multiple sheets of paper feed at the same time Paper feeds at an angle A paper jam occurs Align the paper guide to the paper edge tighter than usual Paper feeds at an angle A margin appears on printouts 1 Perform Bottom Paper gets plate cleaning smeared from the The back side printer driver of paper gets up to 3 times I smeared Print results Print results N as A4 is printed With Photo Paper Plus Double Sided or postcards the phenomenon is likely to be noticeable and to be complained of by users as printing is performed on both sides of such paper Soiling on paper Automatic duplex in automatic duplex printing lines or streaks perpendicular to the paper feed direction Scratches on paper printing Photo Paper Plus
41. lly before performing operation operation was attempted from the menu returns to the display before the error occurrence 1 9 2 4 Warnings Low ink The following ink is low Continue Icon of each ink tank Yes No In Camera Direct Printing only Yes can be selected Print head temperature f the print head temperature does not fall the error code 5200 is displayed indicating the print head temperature rise error Select Yes and press the OK button gt Printing starts and it is indicated on the LCD Select No and press the OK button gt Printing is cancelled and the LCD returns to the display immediately before printing was attempted When the print head temperature falls the error is automatically cleared Note If the print head temperature exceeds the specified limit when the access cover scanning unit is opened the carriage does not move to the ink tank replacement position Protection of excess rise of the print head temperature Recommendation of the print head alignment only on If the print head temperature does not fall the error code 5200 is displayed indicating the print head temperature rise error Cancellation of image Reset the selected photo information select information trimming information y Es Reset trimming effect No If the print head temperature exceeds the specified limit an intermission is inserted during printing gt Automa
42. lution Hx dpi WT 600 x 1200 C M PCIPM 600 x 2400 Print control 8 passes Bi directional Ink used CIMITIIPCIPM Photo Paper Plus Double Sided Print quality High PP 101D Resolution HxV dpi KT 600 x 1200 C M PCIPM 600 x 2400 Print control 8 passes Bi directional CIM YAKIPCIPM Printer driver Custom setting gt Paper type 2 Plain paper Print quality High Resolution HxV dpi CIMA Ak 300 x 300 RFT 600 x 1200 C M 600 x 2400 Print control 1 pass Bi directional 6 passes Bi directional Ink used CME Ne CAMA Photo Paper Plus Double Sided Print quality High PP 101D Resolution HxV dpi AY 600 x 1200 C M PC PM 600 x 2400 Print control 8 passes Bi directional ink used CIMITIECIPM 3 4 Resolution in Camera Direct Printing MY 600 x 1200 CM 600 2400 8 purses Dedumctosal Standard on the operation panel High en the operation panel KPT 600 x 1200 CIMIPCIPM 600 x 2000 RAY G00 x 1200 CAMIPCIPM 00 2400 6 passas Bi directional 8 panes Bidirectissal A c CMITIPCIPMAE MY 400 1200 CALIPCIPM 00 2400 Mf 600 m 1200 CM 600 a 2400 S puse Bidaectiesal MY 600 x 1200 CMIPCIPM 600 2600 8 passes Bi dirt CMY POPMA Photo Paper Plus Glossy High en the operation panel Photo Paper Plus Semi gloss x Art 600 x 1200 CIMUPCIEM 00 2600 PP 101 50 101 B passes Dehisectasmal MVY POPMA High en the operation panel AVT 6000 x 1
43. n the print a5 print head data appears on printouts purge unit or logic board ass y Paper gets smeared Feed several sheets of paper Perform bottom plate cleaning Clean the paper path with cotton swab or cloth Clean the ASF sub rollers A part of a line is missing on Replace the printouts ink tank or print head Color hue is incorrect Replace the ink tank or print head Perform print head alignment Printing is incorrect Replace the logic board ass y No ejection of black ink Replace the ink tank or print head Remove foreign material from the purge unit caps if any Replace the purge unit Graphic or text is enlarged on When enlarged in the carriage movement printouts direction Clean grease or oil off the timing slit strip film Replace the timing slit strip film carriage unit or logic board ass y When enlarged in the paper feed direction Clean grease or oil off the timing slit disk film Replace the timing slit disk film timing sensor unit or logic board ass y 1 Before replacement of the logic board ass y check the waste ink amount by service test print or EEPROM information print If the waste ink amount is 7 or more also replace the ink absorber kit QY5 0147 when replacing the logic board ass y See Section 3 3 Adjustment Settings 5 Service mode for details 2 Replace the print head
44. o Remove the device camera does not support Camera Direct Printing 2001 Automatic duplex printing cannot be performed 1310 duplex printing Remove the paper and press OK Failed in automatic print head alignment 2500 This paper is not compatible with Press the Stop Reset button to Auto head align has failed Press OK and repeat operation See manual the Stop Reset button Close the inner cover and press the Stop Reset button Close the inner cover and press the Stop Reset button Close the inner cover and press the Stop Reset button to clear the error The paper being printed at error occurrence will be ejected without printing the remaining data for the ejected paper then printing will resume from the next page Open the inner cover which functions as the CD DVD tray feeder set the CD DVD tray in the feeder and press the Stop Reset button Open the inner cover and press the Stop Reset button to clear the error The CD or DVD being printed at error occurrence will be ejected without printing the remaining data for the ejected CD or DVD then the next print job will be done Replace the wrong ink tank s with the correct one s ttt Hy The service call error indicating the waste ink absorber is full is likely to occur soon Remove the cable between the camera and the printer E Data which was to be eject the paper being used at error occurrence Printin
45. per press the Stop Reset button and press OK No CD DVD There is no CD R Fr Attach Set the CD DVD Poe and press the tray and press Fr the Ze button No paper in the front Cassette Set the paper in the cassette and paper feed cassette There is no paper Load paper press the Stop Reset button 1003 and press OK N CD or DVD 1002 Printable disc is not set Correctly Set a CD or DVD in the CD place a disc in the CD R tray and DVD tray which is ejected at error occurrence and inset the CD DVD tray in the proper position Then press the Stop Reset button The paper is jammed Clear the Remove the jammed paper and paper and press OK press the Stop Reset button Error in paper feeding from the ASF Error in the duplex printing unit Paper jam 1300 Paper jam in the rear guide 1303 Paper jam in the under guide 1304 Front door close error Paper output tray is closed Open Open the paper output tray The error is indicated if 1250 the paper output tray the paper output tray is closed at start of a print job or while a print job is being performed Error in paper feeding from the cassette ze No ink 1600 Ink has run out Replace the ink Replace the empty ink tank s or Pressing the Stop Reset tank and close the cover press the Stop Reset button button will clear the error without ink tank replacement however ink may run out during printing
46. rber is full 5B00 8 times Print head temperature rise The print head temperature exceeded the error 5200 specified value 9 times EEPROM error 6800 A problem occurred in writing to the EEPROM 11 times Carriage lift mechanism The carriage did not move up or down error 5110 properly 12 times AP position error 6A00 An error occurred in the AP motor during purging operation 13 times Paper feed position error An error occurred in the paper feed motor 6B00 14 times Paper feed cam sensor error An error occurred in the paper feed cam sensor during paper feeding from the front paper feed cassette This error is also indicated when the waste ink counter is 6096 or more and a paper jam occurs 15 times USB Host VBUS The USB Host VBUS is overloaded overcurrent 9000 l6times Valve sensor error 6C00 An error occurred in the valve sensor during cleaning 17 times Motor driver error 6D00 The AD conversion value indicating the motor driver temperature is not proper Ink tank position sensor None of the ink tank position is detected error 6502 Other hardware error 6500 PCI bus error is detected by the ASIC usn pou error E check sum value is incorrect in the ROM 8 1 NO B o u Logic board ass y QM2 2245 Paper feed motor QK1 1502 Purge unit QM2 2299 Logic board ass y QM2 2745 Sheet feed unit QM2 2312
47. rders for plain paper DPOF printing 1 photo per page borderless with borders 6 15 24 35 80 photos per page 30 photos per page panorama Index printing 6 15 24 35 80 photos per page 30 photos per page panorama Image adjustment function Image processing Information print _ Date filename and photo Information printing Print layout Layout printing 2 4 8 photos per page borderless with borders Postcard borderless with borders with without lines Album 4 photos per page right left Mix 3 types for A4 LTR Sticker printing 2 4 9 16 stickers 1 5 6 7 stickers for free cut CD DVD printing Date file name and photo information printing Approx 1 minutes 17 seconds with the following conditions and settings 3 17 A photo from a 5 mega pixel digital camera 4 x 6 borderless Throughput Exif print Standard print quality Process from pressing the printing start button to ejecting paper igi Digital cameras and digital video cameras supporting Bubble Jet Direct or camera PictBridge paper See 4 PRINT MEDIA SPECIFICATIONS photo per page borderless with borders Print layout Index printing standard multiple photos per page Camera Direct Printing 2 4 9 16 photos per page Date file name photo information Approx 1 minute and 17 seconds with the following conditions and settings A photo from a 5 mega pixel digital camera 4 x 6
48. s See 3 3 Adjustment Settings 2 Grease application After replacement 1 Correct the CD DVD and automatic print head alignment sensors See 3 3 Adjustment Settings 5 Service mode 2 Check the ink system function See 3 3 Adjustment Settings 5 Service mode 3 Perform the print head alignment in the user mode At replacement 1 Adjust the paper feed motor See 3 3 Adjustment Settings 1 Paper feed motor adjustment Platen unit p replacement Service test print 13 EEPROM information print Service test print Printing via USB connection Direct printing from a digital camera Service test print EEPROM information print Service test print Confirm CD DVD and automatic print head alignment sensor correction and ink system function QM2 2313 1 Check the ink system function See 3 3 Adjustment Settings 5 Service mode PR lift shaft ass y At replacement Service test print QL2 0936 1 Apply grease to the sliding portions See 3 3 Adjustment Settings 2 Grease application Upon contact with the film After replacement Service test print wipe the film with ethanol Perform the print head Confirm no grease is on the alignment in the user film Wipe off any grease mode thoroughly with ethanol Do not bend the film After replacement Service test print 1
49. tely next printing Timer cleaning 5 If 1 440 to 2 160 hours have elapsed since Each color the previous cleaning till the start of the separately next printing Timer cleaning 6 If 2 160 to 4 320 hours have elapsed since 1 346 Each color the previous cleaning till the start of the separately next printing Timer cleaning 7 If 4 320 or longer hours have elapsed 1 346 Each color since the previous cleaning till the start of separately the next printing At print head When the print head is removed and 2 696 replacement installed At ink tank When an ink tank is replaced without the 1 346 replacement print head removal or re installation Manual cleaning Via the operation panel 0 810 Via the aiias oii MN driver 2 3 um U gt ON gt gt oO Deep cleaning Via the operation panel 1 346 60 Via the printer driver To the table of contents To the top lt Part 2 2 CLEANING MODE AND AMOUNT OF INK PURGED gt 3 PRINT MODE Default setting Selectable in the printer driver Main tab Selectable after clicking Custom in the Main tab Ink used k CLI 8BK C CLI 8C M CLI 8M Y CLI 5Y PC CLI 8PC PM CLI SPM 3 1 Resolution in Printing via Computer PR 101 Glossy Photo Paper GP 401 501 Photo Paper Plus Glossy Print quali Photo Paper Plus Semi gloss Resolution Hx dpi PP 101 8G 101 Print control Ink used Matte Photo Paper
50. tic print head alignment is done Select No and press the OK button gt The procedures on arrival of the printer are finished When one or more images are selected in Multi photo print or Layout print and if a user tries to display the menu or sub menu the message is displayed Select Yes and press the OK button gt The image selection is cancelled and the menu or sub menu is displayed Select No and press the OK button gt The LCD returns to the display immediately before the message was displayed With an image trimmed if CD DVD print is attempted the message is displayed Select Yes and press the OK button The image trimming is cancelled and the procedures for CD DVD print are continued Select No and press the OK button gt The LCD returns to the display immediately before the message was displayed 2 5 Troubleshooting by Symptom mm Solution Faulty operation The power does not turn on The power turns off immediately after power on A strange noise occurs Nothing is displayed on the LCD A portion ofthe LCD is not displayed Paper feed problems multi feeding skewed feeding no feeding Carriage movement problems contact to other parts strange noise Unsatisfactory print quality No printing or no color ejected Confirm the connection of the power cord and between the logic board and the power supply unit Replace
51. tings in the Windows XP driver using Windows XP Photo Printing Wizard The print yield in the table above is an average value measured in continuous printing using the ink tank immediately after it is unsealed until the ink is out Ink yield may vary depending on texts and photos printed application software print mode and type of paper used When the printer is turned on and while printing each ink may be used for protecting the print head and maintaining print quality 1 4 Special Tools In FLOIL KG QY9 0057 To be applied to the sliding portions of the 107A 000 carriage shaft and lift cam shaft 1 3 1 5 Serial Number Location On the carriage flexible cable holder visible on the left of the carriage after the printer is turned on and the panel cover is opened To the table of contents To the top Part 1 1 MAINTENANCE gt 2 LIST OF ERROR DISPLAY INDICATION Errors and warnings are displayed by the following ways 1 Operator call errors are indicated by the Alarm LED lit and the error and its solution are displayed on the LCD in text and by icon 2 Warnings are displayed on the printer driver Status Monitor 3 Error codes are printed in the operator call service call error record area in EEPROM information print 2 1 Operator Call Errors by Alarm LED Blinking in Orange E No paper ASF 1000 Auto sheet feeder Set the paper in the ASF and There is no paper Load pa
52. to the service mode menu selection To the table of contents To the top Part 1 3 REPAIR 3 3 3 to 5 gt 1 27 3 4 Verification Items 1 Service test print lt EEPROM information contents gt On the service test print sample below confirm the EEPROM information as shown below The information is given in the upper portion of the printout iP6600D Model name JPN Destination Vx xx ROM version USB xxxxxx USB serial number FA xx xx xx Reserved for plant use D xxx x Waste ink amount CDR xxxxx yyyyy CD DVD sensor position correction value AB K OK Y Ink system check result lt Print check items gt On the service test print sample below confirm the following items Check 1 top of form accuracy The lines shall not extend off the paper Check 2 EEPROM information Check 3 nozzle check pattern Ink shall be ejected from all nozzles Check 4 check pattern for irregular line feeding There shall be no remarkable streaks or unevenness Check 5 check pattern for uneven printing due to line feeding There shall be no remarkable unevenness Check 6 check pattern for uneven printing due to carriage movement 9600 dpi mode There shall be no remarkable unevenness Check 7 check pattern for uneven printing due to carriage movement 1200 dpi mode There shall be no remarkable unevenness Check 8 CD DVD sensor and automatic print head alignment sensor corr
53. utomatic duplex printing CD DVD printing S600 2 400p Ma 4 x 6 borderless printing Approx 46 sec standard mode PP 101 Full Page SCID No 2 For reference Throughput target Fast Standard Black Fine Black 18ppm 6 5ppm Color Fine Color 17ppm 4 9ppm Bi directional uni directional Print width Max 203 2mm 215 9mm in borderless printing Interface USB 2 0 Hi Speed camera direct print port IrDA 1 2 JPEG files only Bluetooth 1 2 optional JPEG files only ASF stacking capacity Plain paper Max 13mm Approx 150 sheets of 64g m paper Paper weight 64 to 105g m value Access cover open Presence of print head Opening Closing of front door Remaining ink amount optical dot count Printing position Paper presence Paper end sensor Waste ink Detection functions amount Internal temperature Pick up roller Paper feed roller position Carriage position Head to paper distance Supported camera direct printing device Presence of CD DVD Presence of memory card Acoustic noise Highest Highest print quality settings Approx 35dB print quality Quiet mode Approx 34 2dB During operation Temperature 5C to 35C 41F to 95F Environmental Humidity 10 RH to 90 RH no condensation requirements Non operation Temperature 0C to 40C 32F to 104F Humidity 5 RH to 95 RH no condensation Power l Power supply voltage frequency Sons SA Standby Power off Power supply AC 100 to 120V 50 60Hz Appro
54. via the operation panel button in Camera Direct Printing automatic alignment at default Print head alignment Only for CD DVD printing supported regions lt Direct printing gt Compact Flash TYPE I II 3 3V Microdrive SmartMedia Card 3 3V only Memory Stick Memory Stick PRO SD Card MultiMedia Card xD Picture Card miniSD memory card Memory Stick Duo Memory Stick PRO Duo Operation Via the printer buttons ondition Before changing the settings the memory card must be removed unction Read Write eration panel 3 5 color LCD 18 buttons 4 LEDs File format JPEG DCF CIFF Exif 2 21 or prior JFIF TIFF Exif compliant DPOF compliant papet See 4 PRINT MEDIA SPECIFICATIONS Print quality Standard High Image correction Red eye correction Photo Optimizer PRO VIVID noise reduction face i brightener image optimizer Brightness contrast hue skin tones function Sepia illustrated touch no processing Image retrieval Ma vailable date Ver 1 00 compliant Index printing printing of an image the specified number of copies printing of the specified image s printing with the shooting date Supported memory Memory card drive card Storage function 7 Ol o 3 3 3 o o Q 3 3 ec 2 3 e 2 P Card Direct Printing DPOF Single photo multi photo all photo printing 1 photo per page borderless with borders only with bo
55. x 17W Approx 2W Approx 0 8W AC 220 to 240V 50 60Hz Approx 17W Approx 2W Approx 0 8W Printer With the paper support and output tray retracted Approx 429 W x 304 D x 183 H External dimensions mm With the paper support and output tray extended Approx 429 W x 610 D x 308 H mm Approx 7 2kg not including print head and optional units Electromagnetic radiance VCCI FCC IC CE Mark Taiwan EMC C tick CCC EMC Korea MIC Gost R Electrical safety Related standards Electrical Appliance and Material Safety Law DENAN UL C UL CB Report CE Printer Adapter Mark GS Gost R FT SASO CCC SPRING Korea EK IRAM Argentine Environmental regulations RoHS EU WEEE EU Korea Package Recycle Law Green Point Germany Energy Star Eco Mark Law on Promoting Green Purchasing On the E A E flexible cable holder visible on the left of the carriage after the printer is Serial number location number location Serial number location oni off and the n E cover is opened REESE REESE amount Available automatic detection by optical method and dot count enabled at default Available automatic detection by optical method and dot count enabled at default detection by optical method and dot count enabled at default Paper type detection type detection Not Not available OOOO OE FF TFT FF FT Be A Fl 3 16 Available automatic or manual alignment via printer driver Maintenance or
Download Pdf Manuals
Related Search